Develop Bugs

File System Messed Up! Need help!

I am sorry if this has been discussed before, and I do remember reading about it somewhere here on XDA, but it seems my entire file system is messed up. I was on Omega 10 before, then went to CM10.1 and back to Omega. Now, it seems I have a folder 0 inside my SD card which has duplicate folders as the ones in the SDCard folder itself.
I would think the only way to fix this would be a complete wipe of the system and reflashing a ROM? Is yes, then how do I go about doing it? Is there any other way? I am really getting frustrated with this
TIA

Back up, format the internal SD through twrp then install the omega ROM again.
Sent from the Rabbit Hole

Thanks for the help. Can it be done through CWM?
Oh, and would I need an external SD card too?

Alright, for those interested, heres what I did
1. Flashed TWRP through ODIN
2. Formatted Internal SD
3. Flashed Stock firmware through ODIN
4. Rerooted and all that good stuff from toolkit (thanks MSkip)
5. Finally flashed Omega v10
Woooo.. I think I am done with flashing for a few days now :silly:

anirudh412 said:
Alright, for those interested, heres what I did
1. Flashed TWRP through ODIN
2. Formatted Internal SD
3. Flashed Stock firmware through ODIN
4. Rerooted and all that good stuff from toolkit (thanks MSkip)
5. Finally flashed Omega v10
Woooo.. I think I am done with flashing for a few days now :silly:
Click to expand...
Click to collapse
Here is a way to do this with CWM my friend... Check my thread here... http://forum.xda-developers.com/showthread.php?t=2092485 and remember... Search is your friend...

yiannisthegreek said:
Here is a way to do this with CWM my friend... Check my thread here... http://forum.xda-developers.com/showthread.php?t=2092485 and remember... Search is your friend...
Click to expand...
Click to collapse
As I VERY CLEARLY mentioned in my first post, I did remember reading about it on XDA some days ago, but wasnt able to find it. I am not new to XDA you know But thanks for pointing out the thread. Bookmarking it for now, even though I think I am done with AOSP ROMS on the Note 2. Just dont see the point what with all the added features on Sammy based ROMS.

anirudh412 said:
As I VERY CLEARLY mentioned in my first post, I did remember reading about it on XDA some days ago, but wasnt able to find it. I am not new to XDA you know But thanks for pointing out the thread. Bookmarking it for now, even though I think I am done with AOSP ROMS on the Note 2. Just dont see the point what with all the added features on Sammy based ROMS.
Click to expand...
Click to collapse
Yea I was in the same boat too...on the S3 the aosp ROMs seemed good because you didn't have to worry about the spen features and such plus it suited the screen size. However after trying aosp on the note 2 it just made the phone less than what its meant to be. So I went back to using custom stock ROMs. so far omega is the way.
Sent from the Rabbit Hole

bushako said:
Yea I was in the same boat too...on the S3 the aosp ROMs seemed good because you didn't have to worry about the spen features and such plus it suited the screen size. However after trying aosp on the note 2 it just made the phone less than what its meant to be. So I went back to using custom stock ROMs. so far omega is the way.
Sent from the Rabbit Hole
Click to expand...
Click to collapse
Or something like the RR Pitch Black Edition
http://forum.xda-developers.com/showthread.php?t=2005675
The concept is perfect. An AOSP themed Sammy custom ROM. Gonna try it out and see how it performs.

Would I be able to do this if I am stuck at boot screen? I'm at work at the moment so will have to try when I finish. I can still get to download mode or recovery mode but after boot it just hangs at the loading screen. Initially had cf auto root and a version of aroma on N7105T

dalemissen said:
Would I be able to do this if I am stuck at boot screen? I'm at work at the moment so will have to try when I finish. I can still get to download mode or recovery mode but after boot it just hangs at the loading screen. Initially had cf auto root and a version of aroma on N7105T
Click to expand...
Click to collapse
Do what?

Help!!!!!!

Hello I tried to flash pure stock then recovery per instructions and now my t999l is stuck on android system recovery can someone plz tell me if I have bricked my phone crying hard right now

In recovery, factory reset. Then reboot and it should work fine.
Stock recovery will wipe your internal sdcard.
Sent from my SGH-T999L using xda premium

DocHoliday77 said:
In recovery, factory reset. Then reboot and it should work fine.
Stock recovery will wipe your internal sdcard.
Sent from my SGH-T999L using xda premium
Click to expand...
Click to collapse
Post is difficult to decipher, but I take it that the stock recovery is overwriting his custom recovery... but then the rest of the post doesn't make any sense. Needs clarification.

DocHoliday77 said:
In recovery, factory reset. Then reboot and it should work fine.
Stock recovery will wipe your internal sdcard.
Sent from my SGH-T999L using xda premium
Click to expand...
Click to collapse
Mr. Doc I so appreciate you!!! First time posting to thread and Im grateful of your timely response. Let me just tell you exactly whats going on
my phone is in the android system recovery what I am seeing is green android man with a red warning over top of it. it will not let me do anything and I see a message saying "MANUAL MODE" successfully applied multi CSC. It won't connect to ODIN OR Kies Im so scared that I have ruined my phone crying very hard

Odin doesn't work unless you're in download mode.
What happens when you reboot? If it takes you to recovery, boot into download mode (power+vol down+home) and flash a stock image.

imblessed68 said:
Mr. Doc I so appreciate you!!! First time posting to thread and Im grateful of your timely response. Let me just tell you exactly whats going on
my phone is in the android system recovery what I am seeing is green android man with a red warning over top of it. it will not let me do anything and I see a message saying "MANUAL MODE" successfully applied multi CSC. It won't connect to ODIN OR Kies Im so scared that I have ruined my phone crying very hard
Click to expand...
Click to collapse
Also this happened after I flashed the pure stock then I flashed the recovery and the phone automatically went to what I have explained in prior post

When the phone is recovery it doesn't let me do anything factory/reset or anything and when i put in download mode it doesn't connect to ODIN

What rom were you previously using? And you do have a T999L right? You won't be able odin flash any stock firmware because there isn't any.
Try again to get into download mode. If you can boot recovery you should be able to get there too I'd imagine.
Hold volume down and home while powering up.
If you can do this, odin flash either cwm from aerowinders sig, or twrp from mine. Then reflash whichever rom you were running before trying the pure stock rom.
Sent from my SGH-T999L using xda premium
---------- Post added at 01:07 PM ---------- Previous post was at 01:05 PM ----------
Aerowinder said:
Post is difficult to decipher, but I take it that the stock recovery is overwriting his custom recovery... but then the rest of the post doesn't make any sense. Needs clarification.
Click to expand...
Click to collapse
Sorry bout that.
It sounds like he was on another rom and recovery and tried to flash back to stock.
Am I correct?
Sent from my SGH-T999L using xda premium

Hello I'm a she lol but what originally happened was I rooted phone through Odin. Then when I looked in Twrp and cwm it kept saying i had no recovery image. I went through thread on here and saw someone with same issue and follow Mr. Doc's instructions pertaining to the pure stock and recovery and this is where i landed. Im in download mode so yes i see my phone is not ruined lol I just need the file Mr. Doc is telling me about to reflash because im now connected to odin. I had to use another computer. I greatly appreciate all the time taken to help me get my phone back to working order. Since I am new I need to find the place where I can give a lot of Kudos to mr doc and his team now all i need is where to i go for mr doc file

In my signature, click Recoveries. Then in the twrp folder download version 2.5.0.0. Get the one that's a .tar.
Then once connected to odin, click the PDA button and select the tar file you just downloaded. Then click start.
Once done it should auto reboot. Now reboot into recovery and try doing a factory reset there.
If you still can't boot after that, flash the other, deodexed rom from my T999L thread.
I've got to go for a bit but will try to jump back on soon to see how you're doing.
Sorry bout the he/she thing!
Sent from my SGH-T999L using xda premium

Did you get it working?
Sent from my SGH-T999L using xda premium

DocHoliday77 said:
Did you get it working?
Sent from my SGH-T999L using xda premium
Click to expand...
Click to collapse
Yesssss!!!! thank you so much now maybe i can redo what i tried to do

Right on! Glad to hear you're back up snd running!
Let me know if you have any other problems with the T999L stuff.
Sent from my SGH-T999L using xda premium

Thanks Doc and Team T999L!!!
DocHoliday77 said:
Right on! Glad to hear you're back up snd running!
Let me know if you have any other problems with the T999L stuff.
Sent from my SGH-T999L using xda premium
Click to expand...
Click to collapse
I just want to thank Mr. Doc and all who are working very hard to create roms for t999L. I had att s3 on tmobile network and got my phone exactly the way i wanted it when my son comes in the house with a tmobile s3 and wanted to swtich with me because he didn't want the color he got (white lol i had red) however I didn't know this phone was very new and the only thing I could do is root lol. I'm waiting patiently because I really love the LIquidsmooth rom so on that note Mr. Doc and team again I thank you for all your hard work!

recovery
imblessed68 said:
I just want to thank Mr. Doc and all who are working very hard to create roms for t999L. I had att s3 on tmobile network and got my phone exactly the way i wanted it when my son comes in the house with a tmobile s3 and wanted to swtich with me because he didn't want the color he got (white lol i had red) however I didn't know this phone was very new and the only thing I could do is root lol. I'm waiting patiently because I really love the LIquidsmooth rom so on that note Mr. Doc and team again I thank you for all your hard work!
Click to expand...
Click to collapse
Mr. Doc what I was originally trying to accomplish was creating a recovery for the phone. I think my phone is only rooted and I have no recovery or so i think for the phone. Can you help me understand lol. I know cwm is not available yet at least it wasn't couple days ago.

goo.im
imblessed68 said:
Mr. Doc what I was originally trying to accomplish was creating a recovery for the phone. I think my phone is only rooted and I have no recovery or so i think for the phone. Can you help me understand lol. I know cwm is not available yet at least it wasn't couple days ago.
Click to expand...
Click to collapse
Mr. Doc when I go into goo.im it tells me in order to flash roms i need an open recovery scrip compatible recovery then it says it can find one for me thats where im lost and getting confused about whether i have a recovery on the phone. but if im right that means i can't right?

Neither CWM or TWRP have added support yet, though it should be as simple as asking. Ill try to contract them in a bit.
You can manually install any of the latest recoveries for the T999 though. They have been confirmed working by several people.
Are you familiar with Odin? I suggest going to the Recoveries link in my sig and get TWRP version 2.5.0.0. The one you want has the .tar extension.
Then flash that in Odin.
If you aren't comfortable with Odin I can tell you another way using terminal emulator.
Your phone does currently have a recovery, but unless you've installed a custom one its still stock.
Also, you can flash any of the Roms posted for the T999. If the rom doesn't include a kernel, and it touchwiz based, you can flash one of the kernels in my T999L thread in development section. I'd try the MD5 kernel first so its matched with the Touchwiz rom you choose. (If you flash CM or AOSP based roms, do not use the kernels I just mentioned).
Hope that helps!
Sent from my SGH-T999L using xda premium

I used the Toolkit to flash mine: http://forum.xda-developers.com/showthread.php?t=1746682
Choose Device option 62 and then Flash custom recovery. It will automate the ODIN install if you are not familiar.

DocHoliday77 said:
Neither CWM or TWRP have added support yet, though it should be as simple as asking. Ill try to contract them in a bit.
You can manually install any of the latest recoveries for the T999 though. They have been confirmed working by several people.
Are you familiar with Odin? I suggest going to the Recoveries link in my sig and get TWRP version 2.5.0.0. The one you want has the .tar extension.
Then flash that in Odin.
If you aren't comfortable with Odin I can tell you another way using terminal emulator.
Your phone does currently have a recovery, but unless you've installed a custom one its still stock.
Also, you can flash any of the Roms posted for the T999. If the rom doesn't include a kernel, and it touchwiz based, you can flash one of the kernels in my T999L thread in development section. I'd try the MD5 kernel first so its matched with the Touchwiz rom you choose. (If you flash CM or AOSP based roms, do not use the kernels I just mentioned).
Hope that helps!
Sent from my SGH-T999L using xda premium
Click to expand...
Click to collapse
I am familiar with Odin i used that to get me up and running again using the sig you just mentioned. If I'm understanding you correctly you're saying I can flash a t999 rom to my t999L but use a different kernel? Also am I flashing the rom using Odin and if so do I use the same method to flash kernel? I think Im getting a clear understanding because I thought I could only root thorugh odin but install roms through cwm and twrp lol and basically I can use Odin to do it all right? I want to make sure I don't have to bother you all the time lol I should have kept my darn att s3!! thanks again Mr. Doc you truly rock!!!!

DJ_SpaRky said:
I used the Toolkit to flash mine: http://forum.xda-developers.com/showthread.php?t=1746682
Choose Device option 62 and then Flash custom recovery. It will automate the ODIN install if you are not familiar.
Click to expand...
Click to collapse
Thank you DJ have you tried any rome yet and you have t999L also?

[Q] what's the deal with 4.3?

- For android 4.3, there has been a lot of talk on the developer section, and from what I can see, the major bugs/issues have been fixed. Like the ROM not rebooting correctly. For those using 4.3, is this true?
- Also, from what I understand, this was due to the recoveries not being ready for 4.3, however CM released their own bare bone recovery to fix that issue. And then I've read that the TW recovery has also been updated to solve this problem.
-There is a lot of information in the development forums, but I have not seen any post on the steps on what to do in order to upgrade from 4.2 to 4.3.
-Right now I have CWM 5 recovery, because that's been working for me, and I never bothered changing (bad experience with trying to upgrade/change a recovery). Now from what I understand, I should be able to flash the newest touch recovery (via the goo app?), and then wipe and flash any 4.3 ROM. Any detail instructions would be a help, or if someone can create a tutorial post, that would be great.
Thanks in advance.

Here is a post I made yesterday about how I switched from 4.2 to 4.3
I hope it helps. I have been on hellybean 4.3 for two days and everything is running great.
http://forum.xda-developers.com/showpost.php?p=45021060&postcount=632

You could just install ROM Manager and update from there. It's super-easy (you need ROOT, but I presume you have that since you're flashing ROMs anyway). :good:

Sicily1918 said:
You could just install ROM Manager and update from there. It's super-easy (you need ROOT, but I presume you have that since you're flashing ROMs anyway). :good:
Click to expand...
Click to collapse
Many people have had bad experiences with ROM Manager. Especially in the Gingerbread days when its use was more common for this sort of thing.
Just my 2 cents.

monkeybuttons said:
Many people have had bad experiences with ROM Manager. Especially in the Gingerbread days when its use was more common for this sort of thing.
Just my 2 cents.
Click to expand...
Click to collapse
Interesting -- always been good to me, although I only use it to update the recovery; for the ROM itself I use Cyanogen's update util. I also use CWM, not TWRP, so there's that...

bobiscool07 said:
- For android 4.3, there has been a lot of talk on the developer section, and from what I can see, the major bugs/issues have been fixed. Like the ROM not rebooting correctly. For those using 4.3, is this true?
- Also, from what I understand, this was due to the recoveries not being ready for 4.3, however CM released their own bare bone recovery to fix that issue. And then I've read that the TW recovery has also been updated to solve this problem.
-There is a lot of information in the development forums, but I have not seen any post on the steps on what to do in order to upgrade from 4.2 to 4.3.
-Right now I have CWM 5 recovery, because that's been working for me, and I never bothered changing (bad experience with trying to upgrade/change a recovery). Now from what I understand, I should be able to flash the newest touch recovery (via the goo app?), and then wipe and flash any 4.3 ROM. Any detail instructions would be a help, or if someone can create a tutorial post, that would be great.
Thanks in advance.
Click to expand...
Click to collapse
Ur best and safest approach would be to DL Odin and the drivers for ur phone, then go to techerrata.com/browse/twrp2/hercules and DL twrp2.6.0.4, this is the 4.3 compatible version, then put ur device in DL mode and connect to odin, load the tar file in PDA and click start, 30 sec and u have the latest and greatest twrp recovery, now go get hellybean 4.3 or beanstalk4.3 and flash it, watch the beauty take place...
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app

I updated my rom today like I usually do from the CMUpdater and it updated from 4.2 to 4.3. I didn't mean or want to do that, but it didn't tell me otherwise. Now I'm having issues left and right......the one time I don't back it up...grrr.
I'm having the most issues with Gapps. I downloaded the new one and installed it and Google Music and Youtube keeps crashing. I guess I'll be doing the full wipe now.

Did u update to 4 3 gapps? It won't do it automatically, even if u updated through goo it just looks at what version is installed and updates that version, 4.3 gapps can be found in any 4.3 thread
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app

soupysoup said:
Ur best and safest approach would be to DL Odin and the drivers for ur phone, then go to techerrata.com/browse/twrp2/hercules and DL twrp2.6.0.4, this is the 4.3 compatible version, then put ur device in DL mode and connect to odin, load the tar file in PDA and click start, 30 sec and u have the latest and greatest twrp recovery, now go get hellybean 4.3 or beanstalk4.3 and flash it, watch the beauty take place...
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Why do some of those files say hercules, and others sgh-t989? Aren't they the same phone?

Note 3 issues with CWM/Goo Manager recovery bootloops

Hi XDA! I have a Samsung Galaxy Note 3 N900T T-Mobile. I've had custom roms such as CM11 Nightly in the past. Well after trying to do a fresh install a while back of another custom rom, my phone at first had no OS because I wiped it like a doofus. So I flashed it back to stock, 4.3 at the time. And then starting a couple weeks ago I flashed CWM using CWM Manager app. That's when the same issue that's recurring over and over, began. My phone works great as long as I never reboot into recovery. If I reboot into recovery it gets stuck in a bootloop. However I noticed tonight after trying to reboot into recovery using goo manager, I noticed the last line when it first boots, then bootloops, says Set warranty bit-recovery. If I remember correctly shouldn't it say kernel?? I know this is my fault because I'm not as knowledgable as all of you (I'm still learning on my own). SO my question is this. I want to fix this once and for all because I can't ever flash a custom rom like Darthstalker (that's the one I'd like to flash)...after several failed attempts of flashing CM for example, to no avail. What can I do to fix this once and for all and be able to flash a kernel, and Darthstalker? I can get into download mode, needless to say. ANd all the other times it's bootlooped I flashed KitKat 4.4.2 and everything works fine until i try to reboot into recovery. I am at my witts end because this i I really want a custom rom instead of flashing only the md5. Would anyone please be willing to give me a tutorial of some kind? I know it's a lot to ask but I can't find another reliable source that can explain how to do all of this. You're the only site I trust and if anyone is willing to give mea tutorial via email , PM, etc. I'd be eternally grateful beyond belief. Thank you in advance for any advice or info

I posted a few days ago about my bootlooping in the recovery. I finally fixed it by these 3 steps.
1) Odin flashed Stock 4.4.2 complete as this sets the correct boot loader.
2) I downloaded Twrp 2.7.0 the one that list KitKat (Must say this) 4.4 version.
http://goo.im/devs/OpenRecovery/hltetmo/openrecovery-twrp-2.7.0.0-hltetmo-4.4.img.tar
3) Right from Odin when flashing this you set it not to reboot, Once finished you then unplug the usb cable and pull the battery. Let is sit for about 10 sec. Then with the upVlm,Home and Power it will boot to the recovery. It first will post what you said but wait about 10 sec more twrp will come up.
4) Now you should be able to flash any rom you want. I am using axmans N3 for now works great. I will be trying CM 11 later.
5) make a backup once in Twrp
Hope this helps.

helterkelter said:
Hi XDA! I have a Samsung Galaxy Note 3 N900T T-Mobile. I've had custom roms such as CM11 Nightly in the past. Well after trying to do a fresh install a while back of another custom rom, my phone at first had no OS because I wiped it like a doofus. So I flashed it back to stock, 4.3 at the time. And then starting a couple weeks ago I flashed CWM using CWM Manager app. That's when the same issue that's recurring over and over, began. My phone works great as long as I never reboot into recovery. If I reboot into recovery it gets stuck in a bootloop. However I noticed tonight after trying to reboot into recovery using goo manager, I noticed the last line when it first boots, then bootloops, says Set warranty bit-recovery. If I remember correctly shouldn't it say kernel?? I know this is my fault because I'm not as knowledgable as all of you (I'm still learning on my own). SO my question is this. I want to fix this once and for all because I can't ever flash a custom rom like Darthstalker (that's the one I'd like to flash)...after several failed attempts of flashing CM for example, to no avail. What can I do to fix this once and for all and be able to flash a kernel, and Darthstalker? I can get into download mode, needless to say. ANd all the other times it's bootlooped I flashed KitKat 4.4.2 and everything works fine until i try to reboot into recovery. I am at my witts end because this i I really want a custom rom instead of flashing only the md5. Would anyone please be willing to give me a tutorial of some kind? I know it's a lot to ask but I can't find another reliable source that can explain how to do all of this. You're the only site I trust and if anyone is willing to give mea tutorial via email , PM, etc. I'd be eternally grateful beyond belief. Thank you in advance for any advice or info
Click to expand...
Click to collapse
I'm honestly confused on what you are asking. What bootloader are you on . Jellybean or Kit Kat. That is the big part of the question. If you are on Kit Kat you can no longer run Darthstalker as it's a 4.3 rom. Just curious because you say that you flashed 4.4.2 rom and everything works. Also, the bootloop would either be your kernel or your recovery. I would suggest Philz or Twrp 2.7 as they are both updated and will work on either bootloader.
Once you have flashed a bootloader and custom recovery NEVER USE ODIN AGAIN UNLESS YOU HAVE BRICKED YOUR PHONE.

dragonstalker said:
I'm honestly confused on what you are asking. What bootloader are you on . Jellybean or Kit Kat. That is the big part of the question. If you are on Kit Kat you can no longer run Darthstalker as it's a 4.3 rom. Just curious because you say that you flashed 4.4.2 rom and everything works. Also, the bootloop would either be your kernel or your recovery. I would suggest Philz or Twrp 2.7 as they are both updated and will work on either bootloader.
Once you have flashed a bootloader and custom recovery NEVER USE ODIN AGAIN UNLESS YOU HAVE BRICKED YOUR PHONE.
Click to expand...
Click to collapse
I'm on 4.4.2.I figured it is my kernel. After sending this message last night I had my phone in download mode but didn't do anything to it. I decided to turn it off and then on again and it booted. So if this is a kernel issue where would I find one and how would I do this? Oh and when the bootloop occurred last night I was trying to boot into recovery via too manager. If I put Twrp on my phone when I have CWM will they interfere? I apologize for the likely stupid questions but I'm just wanting to get it done properly. One last thing is PacMan ROM compatible?

helterkelter said:
I'm on 4.4.2.I figured it is my kernel. After sending this message last night I had my phone in download mode but didn't do anything to it. I decided to turn it off and then on again and it booted. So if this is a kernel issue where would I find one and how would I do this? Oh and when the bootloop occurred last night I was trying to boot into recovery via too manager. If I put Twrp on my phone when I have CWM will they interfere? I apologize for the likely stupid questions but I'm just wanting to get it done properly. One last thing is PacMan ROM compatible?
Click to expand...
Click to collapse
The kernels you can use are listed in the general thread. A user posted a very good listing of what's what. TWRP 2.7 or Philz Touch are the 2 recoveries i would recommend using. Whichever one you decide will overwrite the other. you can never have 2 recoveries.

OK I'm sorry but I'm a little confused. One solution mentioned was to flash 4.4.2 stock using Odin. But you said not to use it unless I've bricked my phone. So now I'm lost. Lol. Do I flash the stock with the above mentioned method? Or do I flash a kernel and then a ROM? I apologize for my inexperienced questions. I'm including my device info below in hopes you can tell me the very first step I should take. Thank you for all your help!!!
Baseband N900TUVUCNB4
KERNEL- 3.4.0-660648 [email protected]#1
BUILD #- KOT49H.N900TUVUCNB4
SE FOR ANDROID STATUS- ENFORCING SEPF_SM-N900T_4.4.2-0005
SECURITY SOFTWARE VERSION- MOF v1. Release 2
Sent from my SM-N900T using xda app-developers app

helterkelter said:
OK I'm sorry but I'm a little confused. One solution mentioned was to flash 4.4.2 stock using Odin. But you said not to use it unless I've bricked my phone. So now I'm lost. Lol. Do I flash the stock with the above mentioned method? Or do I flash a kernel and then a ROM? I apologize for my inexperienced questions. I'm including my device info below in hopes you can tell me the very first step I should take. Thank you for all your help!!!
Baseband N900TUVUCNB4
KERNEL- 3.4.0-660648 [email protected]#1
BUILD #- KOT49H.N900TUVUCNB4
SE FOR ANDROID STATUS- ENFORCING SEPF_SM-N900T_4.4.2-0005
SECURITY SOFTWARE VERSION- MOF v1. Release 2
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
You are already on the 4.4 bootloader so you can no longer use the Darthstalker rom, you can only use Kit Kat 4.4.2 and above roms from here on out. Next question would be have your rooted your phone since the update and have a custom recovery. If you have not rooted, then you will need to use Odin to run the CF_Autoroot, but that will trip your Knox to 0x1. Thus voiding your warranty.

Yes I rooted. But every time I try flashing CWM or Twrp it bootloops. And to get out of bootloop I have to boot in download and then cancel download and it reboots normal again. Is this a kernel or boot loader issue?
Sent from my SM-N900T using xda app-developers app

helterkelter said:
Yes I rooted. But every time I try flashing CWM or Twrp it bootloops. And to get out of bootloop I have to boot in download and then cancel download and it reboots normal again. Is this a kernel or boot loader issue?
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
Which cwm and twrp are you trying to flash. The only 2 that will work on Kit Kat are PHilz touch latest one, and TWRP 2.7

Twrp 5.7.3
Sent from my SM-N900T using xda app-developers app

So do I flash stock as mentioned from another member or do I flash a kernel? I'm not sure what to do next
Sent from my SM-N900T using xda app-developers app

helterkelter said:
So do I flash stock as mentioned from another member or do I flash a kernel? I'm not sure what to do next
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
oh sorry for the late response. Just got back from boy scouts. Anyway. No you don't need to flash back to stock, Your just flashing the wrong version of TWRP. You can go to the android originial development thread and download the TWRP 2.7 and flash via recovery and you will be all good to go. Also, download the latest Wootever kernel just to make sure you have both angles covered. Both downloads are found in the same section.

Ok thanks so much. Im a little scared to flash in TWRP as it always puts me in bootloops. I did download philz and I was considering flashing that via Odin as I can't boot into recovery. Would that be the next best thing to do? Oh and dont apologize!! I can't thank you enough!
Sent from my SM-N900T using xda app-developers app

helterkelter said:
Ok thanks so much. Im a little scared to flash in TWRP as it always puts me in bootloops. I did download philz and I was considering flashing that via Odin as I can't boot into recovery. Would that be the next best thing to do? Oh and dont apologize!! I can't thank you enough!
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
Yes, odin the custom recovery and you should have no more issues. As for the bootloops with TWRP, you only had issues with that, because the version you were trying to use was outdated and does not work on Kit Kat

Hmm found an interesting possible solution and would greatly appreciate your guidance. I found a ROM that supports KK and I think in this thread that it may indicate why I bootloop when trying to bootbin recovery. http://www.infamousdevelopment.com/...-recover-from-a-bad-flash-updated-for-kitkat/
I'm seriously considering following this whole tutorial of his to the letter. Would it be wise to do?
Sent from my SM-N900T using xda app-developers app

helterkelter said:
Hmm found an interesting possible solution and would greatly appreciate your guidance. I found a ROM that supports KK and I think in this thread that it may indicate why I bootloop when trying to bootbin recovery. http://www.infamousdevelopment.com/...-recover-from-a-bad-flash-updated-for-kitkat/
I'm seriously considering following this whole tutorial of his to the letter. Would it be wise to do?
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
You have already upgraded to Kit Kat, that part is done. and you ran CF_Autoroot correct in Odin correct? If you have done both steps all that is left is to Odin the Philz Touch Recovery that you downloaded.

Ok and yes I did both the first two steps you asked above. After I do flash philz can I flash a ROM it CM or PacMan as long ad they're 4.4.2?
Sent from my SM-N900T using xda app-developers app

helterkelter said:
Ok and yes I did both the first two steps you asked above. After I do flash philz can I flash a ROM it CM or PacMan as long ad they're 4.4.2?
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
As long as they are AOSP Roms that support both bootloaders yes, and as i've been told most if not all the AOSP Roms do support the Kit Kat bootloader that you are already on.

Ok thank you again. I will likely flash philz tonight (if hubby allows me to cuz I usually stay up all night til I got my phone the way I want it, ie no boot loops lol) I will report back to let you know if it works. This phone has been through hell and back with me but I've learned a lot!! Especially from contributors such as yourself. :thumbup:
Sent from my SM-N900T using xda app-developers app

Cool. I'm glad I read this thread. I too had same problems.
Sent from my NOTE 3 using Tapatalk

[Q] Samsung Galaxy S3 - T999 - Emergency - Bricked Phone

Hello XDA Community,
Well I am a beginner in terms of trying to utilize anything my T-Mob. Samsung Galaxy S3 has to offer, tried to place CM11 onto my S3 but I think I just bricked my device.
I got to the part where my phone was unrooted and I had all the files ready for ZIP. I actually used TOWELROOT to unroot it, got SuperSU & permissions, I think I may have bypassed KNOX, not 100% sure.
I had the latest TWRP - it boots into it fine but when I tried to install CM11 w/ GAPPs - it fails to install. I keep getting the error that the binary doesn't work. I was reading on the forums that one had to change the d2tmob into d2can - tried it and put the new zip back into the SD card, I even tried to put CM10.2 thinking that maybe the "stable version" might be better than the nightly.
Anyhow, I was following a guide and I deleted everything (INCLUDING MY OS) except for things in my SD Card.
I cannot recover anything because I backed up my phone onto my phone - which was wiped...real genius....
I am kicking myself, I haven't been able to use my phone for 4 days now, I've been trying to fix it myself but I have NO CLUE in terms of what to do next.
I keep reading about ODIN and booting something else but I am extremely distraught over the whole ordeal and I do not know what to do.
I can boot into download mode (down button + middle + power) but my skills are extremely rudimentary - I am sorry to bother the community but I really do need help.
I have trouble understanding any difficult things - I kind of need the instructions to be broken down to like "Plug phone in now" - do that...and etc. Any links that might help are muchly appreciated.
I just want any OS now - even if it is stock but I need simple instructions ~ I am sorry, I really do not know where else to turn to....pretty sure my phone is bricked (soft bricked, idk) - but I do not know where else to turn - please help XDA community.
So if there's anything someone could dig up or do to help me fix my phone....I would be eternally grateful.

Download the stock or root66 firmware from my thread stickied in development. I suggest reading that and other stickies as well btw.
After downloading, unzip. The result should be a .tar.md5 file.
Boot download mode
Plug in phone, open odin 3.09. (Download in my signature)
Click AP and select the firmware you just got.
After the check finishes, click start. When it says PASS it'll reboot and you're done.
Sent from my SAMSUNG-SGH-I747 using Tapatalk

DocHoliday77 said:
Download the stock or root66 firmware from my thread stickied in development. I suggest reading that and other stickies as well btw.
After downloading, unzip. The result should be a .tar.md5 file.
Boot download mode
Plug in phone, open odin 3.09. (Download in my signature)
Click AP and select the firmware you just got.
After the check finishes, click start. When it says PASS it'll reboot and you're done.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
Thank You so much for the prompty response, downloading the root66 now,
I hope it's okay that I do not have any OS on it. I will definitely let you know how it goes.
Quick Question: download mode is Down Key + Middle + Power.
And AP should be in Odin right?
Also...for the boxes - what should be checked in ODIN 3.09 when I am about to put in the AP thing?

docholiday77 said:
download the stock or root66 firmware from my thread stickied in development. I suggest reading that and other stickies as well btw.
After downloading, unzip. The result should be a .tar.md5 file.
Boot download mode
plug in phone, open odin 3.09. (download in my signature)
click ap and select the firmware you just got.
After the check finishes, click start. When it says pass it'll reboot and you're done.
Sent from my samsung-sgh-i747 using tapatalk
Click to expand...
Click to collapse
it worked! Thank you so much!

Awesome! Glad to hear it! Sorry I didn't answer your last questions in time, but for future reference, only F-Reset Time and Auto Reboot should be checked.
Sent from my SAMSUNG-SGH-I747 using Tapatalk

DocHoliday77 said:
Awesome! Glad to hear it! Sorry I didn't answer your last questions in time, but for future reference, only F-Reset Time and Auto Reboot should be checked.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
No, I am so grateful!
I was wondering if there might possibly be a guide to properly get CM 11, I will definitely look for it. Thanks

DocHoliday77 said:
Awesome! Glad to hear it! Sorry I didn't answer your last questions in time, but for future reference, only F-Reset Time and Auto Reboot should be checked.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
Okay, so now that my phone is back on Stock (I used the root66 method), I have SuperSU but when I go to the app, it gives me the message
"if you have a custom recovery like TWRP or CWM, that can be used to install the SU binary. This is recommended for HTC devices. How would you like to install the SU Binary, with Normal as an option & TWRP/CWM as another option.
I am trying to see how to properly root my phone in the next step.
After I root my phone, I hope to get flash a ROM.
I am sorry to ask again DocHoliday77 but could you please help me once again in terms of what to do next?
I think your instructions were really simple (layman's terms) and it helped me debrick my device.
I just do not know how to flash a ROM, let's just say for purposes that I wanted the Carbon ROM - how would I proceed once I get to the step with SuperSU's message? Please help

If your intentions are to flash a rom, you don't need to be rooted before hand. Just boot into twrp/cwm, factory reset and flash the rom. That's it!
As to your specific question, I always choose Normal for that option.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
---------- Post added at 10:55 AM ---------- Previous post was at 10:53 AM ----------
Just a heads up, I hear they may have solved it, but the latest cm roms haven't worked well without the 4.4.2 modems. If you flash and find you have signal/connection/imei issues, factory reset and flash an older version.
Sent from my SAMSUNG-SGH-I747 using Tapatalk

DocHoliday77 said:
If your intentions are to flash a rom, you don't need to be rooted before hand. Just boot into twrp/cwm, factory reset and flash the rom. That's it!
As to your specific question, I always choose Normal for that option.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
---------- Post added at 10:55 AM ---------- Previous post was at 10:53 AM ----------
Just a heads up, I hear they may have solved it, but the latest cm roms haven't worked well without the 4.4.2 modems. If you flash and find you have signal/connection/imei issues, factory reset and flash an older version.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
Seems like a silly question but how do I get CWM/TWRP?
I had booted into TWRP before but I kept getting the binary updater error when I tried to flash CM11.
Is there an easy way to get CWM - I think that would be my route of preference now because of the sour experience with TWRP.

here is a link to CWM advanced philz touch recovery. its CWM but with xtra options and you use 'touch' instead of volume buttons.
if you want to check it out.
its a flashable zip.
http://forum.xda-developers.com/showthread.php?t=2552640
err on the side of kindness

mrrocketdog said:
here is a link to CWM advanced philz touch recovery. its CWM but with xtra options and you use 'touch' instead of volume buttons.
if you want to check it out.
http://forum.xda-developers.com/showthread.php?t=2552640
err on the side of kindness
Click to expand...
Click to collapse
Thank You very much. I'll try to follow the instructions.
And my SuperSU popup never came back after the first time - I do not think it is working properly

mrrocketdog said:
here is a link to CWM advanced philz touch recovery. its CWM but with xtra options and you use 'touch' instead of volume buttons.
if you want to check it out.
its a flashable zip.
http://forum.xda-developers.com/showthread.php?t=2552640
err on the side of kindness
Click to expand...
Click to collapse
Sorry, was just reading up on how to flash PhilzCWM with a GS3-t999 but it seems a bit complicated.
I'm sorry, I am extremely computer illiterate and I have to apologize for that.
My goal is to get a custom ROM - I already have the ROM I want downloaded and such but I just do not have anyway to flash it.
Is there any easier way to get to where I want to be?
Please let me know & if you could provide simple layman's terms, I would greatly appreciate it.
Thanks in advance.

if you can get to cwm recvery to flash a zip file , then
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte/
the 2nd zip file from the bottom is the latest i believe. (philz_touch_6.486-d2lte.zip).
click on that and it should download to your phone. then go into CWM and choose that file to flash. reboot phone. then go back into recovery and you should now have 'cwm advanced philz touch recovery' on your phone.
then you can flash your ROM from there.
hope that made sense.
err on the side of kindness

Can you tell us exactly what recovery you currently have? Twrp/cwm/philz should all work fine. I use twrp. Just personal preference.
Also, go into Settings > about device and tell us your current baseband.
Sent from my SAMSUNG-SGH-I747 using Tapatalk

twrp for me also doc. feels more user friendly. (just my opinion) still on v.2.6.3.1 d2att and no problems. just saying.
twrp d2tmo =
http://forum.xda-developers.com/showthread.php?t=1809313
err on the side of kindness

DocHoliday77 said:
Can you tell us exactly what recovery you currently have? Twrp/cwm/philz should all work fine. I use twrp. Just personal preference.
Also, go into Settings > about device and tell us your current baseband.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
Hey I finally installed a custom ROM onto my Galaxy S3!
I just used TWRP and flashed it. I've been messing around with all the combinations so far ~ it's really amazing, it's like I have a new phone.
Quick Question: say I wanted to flash another ROM, other than the one I am currently using.
Can I just download another ROM onto my SD card and flash it via TWRP again OR
Do I have to restore the phone back to it's original stock OS and redo the TWRP thing again?

dkuang said:
Hey I finally installed a custom ROM onto my Galaxy S3!
I just used TWRP and flashed it. I've been messing around with all the combinations so far ~ it's really amazing, it's like I have a new phone.
Quick Question: say I wanted to flash another ROM, other than the one I am currently using.
Can I just download another ROM onto my SD card and flash it via TWRP again OR
Do I have to restore the phone back to it's original stock OS and redo the TWRP thing again?
Click to expand...
Click to collapse
Sorry I haven't replied sooner. Haven't been home this weekend.
For the most part, yes, just download the new rom and flash. No need to revert to stock or reflash recovery except in certain situations.
Unless you are flashing a very similar rom, it's always a good idea to factory reset. You can get away with "dirty flashing" sometimes, but if you have problems, youll have to reset.
This is required if going between different based roms such as Touchwiz and cm.
Sent from my SAMSUNG-SGH-I747 using Tapatalk

DocHoliday77 said:
Download the stock or root66 firmware from my thread stickied in development. I suggest reading that and other stickies as well btw.
After downloading, unzip. The result should be a .tar.md5 file.
Boot download mode
Plug in phone, open odin 3.09. (Download in my signature)
Click AP and select the firmware you just got.
After the check finishes, click start. When it says PASS it'll reboot and you're done.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
Hi, everybody!
The minus page says that the file is not avaible or does not exist, when I try to download the original ICS Rom of the T999 T-Mobile.
Please, fix this!
Thanks!

porrafonso said:
Hi, everybody!
The minus page says that the file is not avaible or does not exist, when I try to download the original ICS Rom of the T999 T-Mobile.
Please, fix this!
Thanks!
Click to expand...
Click to collapse
I don't recommend installing a stock ICS ROM if your phone has a 4.3 bootloader.

Yeah I did the ICS on the 4.3 bootloader. Don't do it, it hurts......