Hi All ,
I had Vz droid Incredible locked. Last week i moved to att and so unlocked the incredible 2 with some unlock code . It started working on att network i'm able to make call and receive calls. But the data plan (mobile internet )and 3G is not working. Please do you have any suggestion on how to get this working.
Vivow HBOOT - 0.98 and android : 2.3.4
thanks
kevin.
You will never get data because the radio in the dinc2 can't pick up the frequencies of at&T's data network.
Sent from my ADR6400L using Tapatalk 2
I thought you could get 2g speeds on ATT and Tmo.
Check in your settings to make sure you have all network settings set appropriately.
OP, are you running VZ's factory (HTC) ROM or custom ROM (Sense or ??) and was your DI2 unlocked by code via eBay or by VZW Global Support while you're on CDMA with Big Red?
Can you switch to GMS/UMTS setting - and check to see whether it's picking up AT&T and/or T-Mobile - and you are in the US, correct? Are you on prepaid or postpaid with AT&T and is data enabled on your account?
Mine was rooted & unlocked via VZW, and GSM voice/SMS worked fine - running SkyRaider, CS's lates CM7.2 & NJ's Sense2.1/3.0 stock roms - (E)dge or 2.5/2G data works on my AT&T Gophone SIM with data but won't work on T-Mo unless I subscribe/add the data option. For overseas travel, my China Mobile HK prepaid Sim worked great for voice, SMS & broadband on PAYG basis here in the US too - roaming on its partners, either AT&T or T-Mobile (it's on Edge/GPRS only, I think - as I don't need to run up pricey charges for broadband access, use WiFi when I'm on this CMHK account) - when we're in Bermuda last month, same Sim roamed on DigiCel and it showed 3G connection.
Most likely, you will need to clear cache & reset your DI2's browser settings, and maybe modify the APN to get broadband/MMS to work properly, assuming that you are provisioned properly ...
Thanks for your replies.
yes i did some APN settings and mobile internet worked. But working for only Edge data connection not for 3G. This phone is still having VZW ROM (android build), But if i root it and change the android to ICS, do you people think it will work on 3G.
I need to have 3G running on my phone because of att poor service, I'm using the micro-cell to get the att service at my home (micro-cell works with 3g phones). Any suggestion please.
thanks
I bought my n7100 on taobao here in China, and it's a Korean version. I put my China Mobile sim card in, and it makes and receives calls, and text messages and can use wifi with no problem.
The only thing is the mobile data doesn't work. I rooted and tried tweakker, and HiNet, to reset my APN and MMS settings, but that didn't work. My phone still thinks I'm roaming.. it displays
this message "Data Roaming, You have lost data connectivity because you let your home network with data roaming turned off".
I've also tried updating the APN and MMS settings manualy with information i've found on the web.
I've googled and searched this forum and I can't find much. I thought it would be an easy APN settings fix but it seems not to be...
I took my phone in to the local China Mobile store they couldn't fix it. I took it to a local android expert here and they didn't know what to do.
Any ideas would be greatly appreciated.
If you bought a Korean Note 2, you don't (shouldn't) have an N7100. I also purchased one through Taobao.
You should have an SHV-E250S, E250L, or E250K. Which one do you have? Check the baseband version under Settings > About device page.
No matter what, you're going to be limited to 2G only with China Mobile.
You're right, It's SHV-E250S, and I'm fine using the 2g in China on China mobile, but I'd just like to know how..any help?
Baseband Version is E-250SKSVLJK
Try removing all modifications to your APN settings.
Next, go into Settings > More settings > Mobile networks > Network mode and change it to GSM only. Also make sure that Data roaming is not selected. Run a new scan for network operators while you're in there to refresh your APN settings to the right ones.
In data network mode I only have 2 options "3g only" or "LTE Preferred" I have it on 3g only. I have now unchecked data roaming, but I don't see any place to scan for network operators. I have included a few screenshots here, sorry i don't know how to insert them.. http://tinypic.com/r/2198djn/6 http://tinypic.com/r/24dhfmx/6 http://tinypic.com/r/2zof98w/6
Now it's obvious why you don't have data. Is this the stock Korean ROM? Are you rooted?
I can point you to a decent ROM that will fix all of this, provided you have the patience to fix it. It's relatively easy.
Yes it seems to be the stock Korean ROM. I am rooted using http://forum.xda-developers.com/showpost.php?p=31801060&postcount=2 I'm more than willing to flash another rom. I've put about 20 hours into this so far, I imagine I can muster enough patience to finish it
Once they give us a damn Korean Note II section, this kind of information will be a lot easier to find.
Try this ROM for now, it's the one I've been using for a few weeks and I love it.
Link source: http://koxda.com/thread-98683-1-1.html
ROM Download: http://pan.baidu.com/share/link?shareid=149494&uk=3355956772
Password: koxda.com
Thanks a lot the rom (715mb) is downloading now, I have tried to flash ROM's on my old galaxy nexus, and on this note II, but I never succeeded, can you please link me to a good guide, on how to flash this rom? thanks.
Odin is included in the download. If you're using Windows 7 you may or may not have the drivers for the phone, and can grab them out of the All-in-one Toolkit. Just installing the toolkit should install the drivers necessary.
http://forum.xda-developers.com/showthread.php?t=1923956
The ROM you're downloading has two files and two pictures, as well. Open the pictures and follow along. All you have to do is click two buttons, select two files, then hit start. It WILL wipe your phone.
I installed that rom you suggested, I went into settings and did GSM only, and had it automatically find my network (china mobile) selected it, rebooted, and still it says i'm roaming so there is no connectivity... any more ideas?
Can you try somebody else's SIM?
There's no reason you should not be getting service unless something is not right with your SIM or phone.
I installed the rom you suggested, i went into settings and made it GSM only, also had it automatically correctly locate my network (china mobile) and it said "registered on network".. but it still isn't working, same problem, it says no connectivity cus i'm roaming.. any ideas now?
my gf will be home from work in a couple hours, I can try her sim card then.. my sim card was cut by me for my old iPhone.. is it possible or likely that the phone can still make and receive calls, but that somehow data connectivity was affected by me cutting the card? also one guy at the phone fixing store tried his sim card (from another company) and internet worked fine he said..
dadroidda said:
I installed the rom you suggested, i went into settings and made it GSM only, also had it automatically correctly locate my network (china mobile) and it said "registered on network".. but it still isn't working, same problem, it says no connectivity cus i'm roaming.. any ideas now?
Click to expand...
Click to collapse
China mobile have various sim plans, from local to province to national. Are you using the sim in the same city in which you bought it? If not and you don't have a national plan, it could be why the phone is showing roaming. In China going from one province to another is already considered roaming unless you have a national plan. This is from my experience back 2 years ago. Also, you best check at a China mobile shop if you have data activated, gprs/edge is not activated by default, you need to ask them to do it.
I would advise you to switch to China unicom as they have 3g/hspa which is much faster than china mobile.
Sent from my GT-N7105 using xda premium
For clarfication, I am in Hainan, and the card is from hainan. I use the same sim card in my galaxy nexus without any problem. I tried my gf's card just now, it didn't say any problem with connectivity, and did not display roaming.. And it shows the G symbol (for 2 or 3 G I assume), and has up and down arrows next to it.. but it doesn't actually work for browsing the web or using apps over the data network.. I even reset all the APN settings and let it automatically find the China Mobile network, but it didn't help.. what if I try to set the APN settings manualy? and any other ideas??
Showing the G symbol is GPRS, which is 2G. You will not get 3G on the N7100, N7105, or Korean model Note 2 on China Mobile.
Sounds like you need a new SIM card. You can try to set the APN manually to make the data work with hers. I've never had to set an APN manually and I've used many phones here with all 3 carriers, so it's a bit odd to me. No clue why your card doesn't work, but since hers is working fine, it's definitely not your phone.
For the record, her card displayed G, but even after messing with settings, I couldn't get it to have working data network..
Today I bought a new card, and had it officially cut to size, put it in the note II and it's still telling me no data connectivity due to i'm roaming.. i'm so frustrated
edit: after restarting a few times and trying to automatically make it register on china mobile .. it worked on the 4th attempt.. it still displays data roaming, and I had to enable data roaming... but now it works, even though it says i'm roaming?? wtf
Ive the same problem with my Korean galaxy note 2 all voice service work perfect but when I tried to turn on data it says insert Usim Card to access network please help
Hello all,
Prior to going to the US last September I had checked with my carrier (Vivo) in Brazil that the 4G-LTE frquency they use is 2.600MHz. When in the US, I managed to buy the above said device and brought home. Back home, as it was
unlocked my carrier's SIM card worked like a charm. It downloaded from the carrier's network the APN configurations and all was fine.
I went to the carrier's shop to try the 4G-LTE so I could bump up my contract. I tried the clerk's SIM card (he has 4G-LTE) and the signal icon changed from 4G to a smaller 4G with underscore LTE. But only the 3G and 2G APNs were found when searching networks manually.
I did rooted the device and removed the bloatware that came along using this xda-developers how-to.
Any idea how can I get 4G-LTE access on my device?
Thanks in advance,
gtludwig
gtludwig said:
Hello all,
Prior to going to the US last September I had checked with my carrier (Vivo) in Brazil that the 4G-LTE frquency they use is 2.600MHz. When in the US, I managed to buy the above said device and brought home. Back home, as it was
unlocked my carrier's SIM card worked like a charm. It downloaded from the carrier's network the APN configurations and all was fine.
I went to the carrier's shop to try the 4G-LTE so I could bump up my contract. I tried the clerk's SIM card (he has 4G-LTE) and the signal icon changed from 4G to a smaller 4G with underscore LTE. But only the 3G and 2G APNs were found when searching networks manually.
I did rooted the device and removed the bloatware that came along using this xda-developers how-to.
Any idea how can I get 4G-LTE access on my device?
Thanks in advance,
gtludwig
Click to expand...
Click to collapse
I suspect your APN need modifying. Check the clerks APN settings against yours.
Your APN is set wrong. I'm not sure how to change it on the stock AT&T ROM though.
fire219 said:
Your APN is set wrong. I'm not sure how to change it on the stock AT&T ROM though.
Click to expand...
Click to collapse
It's in the settings/tethering and networks/mobile networks/access point names. I have consumer cellular, but it leases from ATT, so it has slightly different settings, though ATT APN will work ok.
JeffDC said:
It's in the settings/tethering and networks/mobile networks/access point names. I have consumer cellular, but it leases from ATT, so it has slightly different settings, though ATT APN will work ok.
Click to expand...
Click to collapse
I had thought that menu was just tethering settings. That's embarrassing. :S
Hello all. I purchased a edge+ today but whenever I insert a sim, the phone stays on searching. I made sure that I rebooted the device and I also tried re-seating the sim many times. I believe the device is unlocked and the imei/esn is in clean standing with T-Mobile. I tried a MetroPCS sim card and it stayed on searching, same thing happened with a Verizon sim. However when I inserted the T-Mobile sim, it sometimes says no service but ever since I rebooted the device, it stays on "searching" no matter which sim is installed. I find this whole ordeal frustrating since the signal bars show up for the MetroPCS and T-Mobile sim but with Verizon nothing happens. Any help would be greatly appreciated.
Yours is G928T? If yes, it does not support Verizon/Sprint even if it's unlocked.
Did you buy it off of Craigslist/Ebay? It might be blacklisted. checkesnfree.com
knite75 said:
Yours is G928T? If yes, it does not support Verizon/Sprint even if it's unlocked.
Did you buy it off of Craigslist/Ebay? It might be blacklisted. checkesnfree.com
Click to expand...
Click to collapse
Yes, it's the G928T but it's not blacklisted I checked. The simcards I was using on the phone were old ones(no longer in service) I thought they would work. I used a scissor to cut my WORKING sim and placed it in the phone and it took the MetroPCS sim. Everything works fine now except calls and text only work with WiFi Calling on. If I turn off WiFi, I can't text or make calls(not on registered network) but if I turn the WiFi back on, it works fine. Any suggestions?
MetroPCS and T-Mobile are on the same network.
Check/add MetroPCS APN.
Setting -> Mobile Networks -> Access Point Names
Add MetroPCS APN if it's not there.
gazasalim said:
Yes, it's the G928T but it's not blacklisted I checked. The simcards I was using on the phone were old ones(no longer in service) I thought they would work. I used a scissor to cut my WORKING sim and placed it in the phone and it took the MetroPCS sim. Everything works fine now except calls and text only work with WiFi Calling on. If I turn off WiFi, I can't text or make calls(not on registered network) but if I turn the WiFi back on, it works fine. Any suggestions?
Click to expand...
Click to collapse
knite75 said:
MetroPCS and T-Mobile are on the same network.
Check/add MetroPCS APN.
Setting -> Mobile Networks -> Access Point Names
Add MetroPCS APN if it's not there.
Click to expand...
Click to collapse
Yeah I know they are which baffles me as to why it isn't working. I tried adding a custom APN but same thing happens. I get calls/sms on WiFi but if I turn it off I get "No Service"
Just go to metro and get a new Sim. You could have damaged it by cutting it. It should be free. ATT gives me then free all the time. Usually, the phone will just auto update the apn settings when a specific carriers Sim is inserted
Sent from my SM-G928T using Tapatalk
erick161 said:
Just go to metro and get a new Sim. You could have damaged it by cutting it. It should be free. ATT gives me then free all the time. Usually, the phone will just auto update the apn settings when a specific carriers Sim is inserted
Sent from my SM-G928T using Tapatalk
Click to expand...
Click to collapse
I went and it turns out the device is blacklisted. This whole time I was rolling with the imei in the phone, after checking last night, I noticed that the imei on the back of the device differs from the one that's actually on the software. I was able to get in touch with the seller and he's coming back to give me my money back. Guess a mod can mark this thread closed.
Can you tell me sir is this rom will work or not in my smn910s because i want to remove the korean stuff.http://www.kampucheadl.com/2016/09/...ck-rom-fix.html?showComment=1483866567116&m=1
Sent from my SM-N910S using Tapatalk
i falshed my n910s with this rom and it works perfectly fine. Make a backup just to be sure. If you are not on 6.0.1 ,first flash the official 6.0.1 first and then flash the fix rom
Korean KT Samsung Note 4 is not getting 4G/LTE. It is only getting 3G on ATT Go Phone SIM Plan. At one time on a Family Talk Plan it was getting 4G/LTE. I tried talking to ATT Tech Support but all they did was try different APN Settings and did not work. I did notice the APN Settings would not stick to the NXTGENPHONE APN (Flashed a message stating unstable Network) and always automatically switched back to the Cingular 410 APN. I already paid $70 for the GoPhone Plan. Can anyone please help me get 4G/LTE on the GoPhone Plan? I tried different modes in the Hidden Menu. One of the LTE Modes did give me LTE and gave really fast data but all my cell phone bars went to zero. Is there any other settings or the Hidden Menu or APN Configurations that will work? TIA.