Develop Bugs

[n7100]Bootloop after installing DN3 Bootloader

Hi,
Just brought my note II three days ago, and looking to update on 4.3. Phone was rooted, Philz installed, stock rom installed (this on : http://forum.xda-developers.com/showthread.php?t=2605464).
After boot I didn't have wifi, so I follow the instructions to install the bootloader, and after that impossible to boot and impossible to flash again.
I don't know if it's because the bootloader is locked or the NAND is corrupted.
I tried to flash with original stock to fix, but same result, always the same result.
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXUEMK8_N7100OXAEMK1_N7100XXUEMJ9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
[COLOR="DarkOrange"][B]<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL![/B][/COLOR]
<OSM> All threads completed. (succeed 0 / failed 1)

There are two things You can try.... Flashing using hemdall recovery or else try flashing the firmware along with the modem file. It worked for me. Do try this after re-installing the Samsung USB driver.
Sent from my GT-N7100 using XDA Premium 4 mobile app

I will look for thx.
Do you have a link for the firmware + modem you installed please.
The modem is integrate the TAR I downloaded I guess (got it from sammobile).
Since my S2, it's first time I have a problem, usually I found the answer on the forum or internent, but not this time.

Zubair1024 said:
There are two things You can try.... Flashing using hemdall recovery or else try flashing the firmware along with the modem file. It worked for me. Do try this after re-installing the Samsung USB driver.
Sent from my GT-N7100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes you find the modem you were using and flash it with the rom in Odin. Next time if Wi-Fi doesn't turn on don't flash the bootloader instead Flash Dr ketan's Wi-Fi patch zip file in recovery. It worked for me.
Sent from my GT-N7100 using xda premium

Code:
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> modem.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Transmission Complete..
[B][COLOR="DarkOrange"]<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> FAIL![/COLOR][/B]
<OSM> All threads completed. (succeed 0 / failed 1)
That didn't work u.u
I tried to flash Stock ROM + MODEM, MODEM alone, always the same problem. (I used odin3.07)
I will try with the other soft, but I have to look for the tar.gz or change my tar.md5 to tar.gz (...but not with windows, i'm not confident in it for that -_-)

[Q] Sprint Galaxy S3, Trying to flash Stock ROM, ODIN 3.07, Stuck on sbl2.mbn

I attempted to update my rooted Sprint Galaxy S3 via Kies to 4.3, although it did not finish. My phone was on during the initial running of Kies, the phone went into Download(ing... Do not turn off target) mode (Odin)
ODIN MODE
PRODUCT NAME: SPH-L710
CUSTOM BINARY DOWNLOAD: Yes (1 counts)
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
QUALCOMM SECUREBOOT: ENABLE
Warrenty Bit: 0
BOOTLOADER AP SWREV: 1
After sitting for a substantial amount of time Kies states that it needs to do a Emergency Firmware Recovery, I attempt, but isn't able to do so. Assuming it has a problem working with ODIN MODE, I run the alternative method of flashing the Stock ROM to my phone using ODIN 3.07 (in administrative mode/ Windows 8)
I download the ROM: KIES_HOME_L710VPBLJ7_L710SPRBLJ7_329968_REV03_user_low_ship.tar.md5
I follow the guide for putting the ROM into the PDA spot,
when I select the ROM from my folder it shows this:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_L710VPBLJ7_L710SPRBLJ7_329968_REV03_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
I then Start ODIN:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl2.mbn
This is as far as it will go.
I've restarted the system and ran it again just as described.
I've reinstalled Samsung USB Drivers
I've looked for another Stock ROM, but the Sammobile.com/firmware downloads aren't available due to the hosting site.
Please, if anyone has had this problem and has fixed it, or anyone that knows why it is stopping at sbl2.mbn contact me here or at [email protected].

dcbstudios said:
I attempted to update my rooted Sprint Galaxy S3 via Kies to 4.3, although it did not finish. My phone was on during the initial running of Kies, the phone went into Download(ing... Do not turn off target) mode (Odin)
ODIN MODE
PRODUCT NAME: SPH-L710
CUSTOM BINARY DOWNLOAD: Yes (1 counts)
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
QUALCOMM SECUREBOOT: ENABLE
Warrenty Bit: 0
BOOTLOADER AP SWREV: 1
After sitting for a substantial amount of time Kies states that it needs to do a Emergency Firmware Recovery, I attempt, but isn't able to do so. Assuming it has a problem working with ODIN MODE, I run the alternative method of flashing the Stock ROM to my phone using ODIN 3.07 (in administrative mode/ Windows 8)
I download the ROM: KIES_HOME_L710VPBLJ7_L710SPRBLJ7_329968_REV03_user_low_ship.tar.md5
I follow the guide for putting the ROM into the PDA spot,
when I select the ROM from my folder it shows this:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_L710VPBLJ7_L710SPRBLJ7_329968_REV03_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
I then Start ODIN:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl2.mbn
This is as far as it will go.
I've restarted the system and ran it again just as described.
I've reinstalled Samsung USB Drivers
I've looked for another Stock ROM, but the Sammobile.com/firmware downloads aren't available due to the hosting site.
Please, if anyone has had this problem and has fixed it, or anyone that knows why it is stopping at sbl2.mbn contact me here or at [email protected].
Click to expand...
Click to collapse
I would assume its because you're attempting to downgrade. Try this in Odin instead
http://rwilco12.com/Files/Devices/S...0VPUCMK3_L710SPRCMK3_L710VPUCMK3_HOME.tar.exe

At this point, DO NOT reboot the phone. If you had read the Knox faq, you would know that attempting to flash a < MK3 stock tar will while on the Knox bootloader will immediately brick your phone because the older firmware will not get written. Right now, you need to immediately flash an MK3 full stock tar if you don't want a fancy paperweight.

CNexus said:
At this point, DO NOT reboot the phone. If you had read the Knox faq, you would know that attempting to flash a < MK3 stock tar will while on the Knox bootloader will immediately brick your phone because the older firmware will not get written. Right now, you need to immediately flash an MK3 full stock tar if you don't want a fancy paperweight.
Click to expand...
Click to collapse
The previous gentleman sent me a link to the MK3 update. I tried to run it through ODIN but it just hangs at
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L710VPUCMK3_L710SPRCMK3_L710VPUCMK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl2.mbn

Jessooca said:
Don't use a pit file and don't check repartition.
Use Odin 1.87 it hasn't given me an issue flashing the latest tar file
Sent from my SPH-L710 using xda app-developers app
---------- Post added at 04:51 PM ---------- Previous post was at 04:49 PM ----------
Also use a download manager to download the stock tar, that way you won't have a wonky download which sounds like is your case possibly
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
What would you recommend as a download manager? If you don't mind me asking.
After running the tar I got from a previous post, a MK3 tar, it gives me:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L710VPUCMK3_L710SPRCMK3_L710VPUCMK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl2.mbn
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This time passing sbl2.mbn.....but shouldn't it also load sbl1.mbn and sbl3.mbn....i've seen it listed in so many other posts.

Thank you for the tar file. I'm also curious on the the topic...are there more than one Odin? I have Odin3, (some sites refer to it as Odin3, ODIN, or just Odin) versions 1.87 (the one you told me to try), 3.07, and 3.09. I wasn't under the impression that certain versions of Odin worked better for some than others. Do they? And, is Odin and Odin3 different? I appreciate your help on this subject.

Uninstalled the USB drivers then reinstalled them with SGS3 tool kit, swapped to original cable from Samsung galaxy s4,, as well as USB port... It has a status bar on Odin first time .... Hold tight.

IT PASSED!
To be clear for people that have this same problem in the future...
Uninstall Kies, if you have it
Run a registry cleaner, I used CCleaner
Install Samsung Galaxy USB Drivers through SGS3 Toolkit
Use Odin 1.87 in Admin
Use MK3 tar in PDA section, leave auto reboot and reset time
Use original or I'm assuming Samsung USB cable
If one port doesnt work, try another USB port
Thank you everyone for your input and help, folks like you make this site worth using. :good:

Still having the same problem!!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L710VPUCMK3_L710SPRCMK3_L710VPUCMK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl2.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl3.mbn
<ID:0/005> aboot.mbn
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Did you follow the instructions two posts before yours?
Sent from my Sprint Samsung Galaxy SIII with M.O.A.R. v9.0, dkp kernel dated 3/20/2014 and TWRP v2.7.0.0.

FUNNY!!!!
someone tell me im using the wrong Soft because my phone is "BLUE"...??? i so i tried this one
L710VPUDND8_L710SPRDND8_SPR.zip
and it works...:laugh::laugh::laugh::laugh::laugh:

[Q] Stuck in Bootloop and ODIN isn't working

I'm on 4.4.4 AOKP and I accidentally formatted something in recovery and got stuck in bootloop. Downloaded stock TW for S3 but everytime ODIN keeps giving me an error.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747UCDLK3_I747ATTDLK3_I747UCDLK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Also, can't seem to be able to get CWM or TWRP back on but I can get the stock recovery. Tried Kies but that didn't work. Been looking for stuff for a couple hours and can't seem to find an answer. Any help is appreciated, thanks.

I'm in a similar situation but in my case I have cwm but can't switch recovery or even upgrade it, and flashing roms doesn't stick.
Sent from my SM-N900T using XDA Premium 4 mobile app

TheAccomplisher said:
I'm on 4.4.4 AOKP and I accidentally formatted something in recovery and got stuck in bootloop. Downloaded stock TW for S3 but everytime ODIN keeps giving me an error.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747UCDLK3_I747ATTDLK3_I747UCDLK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Also, can't seem to be able to get CWM or TWRP back on but I can get the stock recovery. Tried Kies but that didn't work. Been looking for stuff for a couple hours and can't seem to find an answer. Any help is appreciated, thanks.
Click to expand...
Click to collapse
Are you able to boot in recovery? (home + vol up + power) - You could just reflash from there.
Do you know what you formatted in recovery?

I can get to recovery and download mode but I'm on stock recovery and can't flash anything. I must have formatted /system or /data

TheAccomplisher said:
I can get to recovery and download mode but I'm on stock recovery and can't flash anything. I must have formatted /system or /data
Click to expand...
Click to collapse
Have you tried flashing a custom recovery through Odin?
Also, if you're on 4.4.4, chances are that your bootloaders are on 4.3+. You'll need the MJB (4.3) or NE4 (4.4.2) stock to flash through Odin.
Downgrading bootloaders will result in a brick, therefore it's a good thing it's not going through!

I flashed TWRP and got a pass but every time I get into recovery mode I just get a black screen.
Where can I get NE4?
Thanks

TheAccomplisher said:
I flashed TWRP and got a pass but every time I get into recovery mode I just get a black screen.
Where can I get NE4?
Thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2789917
If already on the MJB bootloaders/modem: http://forum.xda-developers.com/galaxy-s3-att/general/ucuemjb-to-ucufne4-firmware-update-t2808654

Since I'm on 4.4.4 I already have the MJB right?

TheAccomplisher said:
Since I'm on 4.4.4 I already have the MJB right?
Click to expand...
Click to collapse
I think so but you only can be sure if you updated your bootloaders to 4.3 (or up to the new NE4 4.4.2).

All right thanks I'll have to try it in a couple hours

TheAccomplisher said:
Since I'm on 4.4.4 I already have the MJB right?
Click to expand...
Click to collapse
The error at aboot.mbn tells me you have the 4.3 bootloader on your phone. By trying to flash a stock Samsung ROM in Odin means Odin will try and downgrade the bootloader to an older version which cannot be done once you are on a stock 4.3 bootloader. Don't keep using Odin to flash a stock Samsung ROM as it may brick your phone.

TheAccomplisher said:
I'm on 4.4.4 AOKP and I accidentally formatted something in recovery and got stuck in bootloop. Downloaded stock TW for S3 but everytime ODIN keeps giving me an error.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747UCDLK3_I747ATTDLK3_I747UCDLK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Also, can't seem to be able to get CWM or TWRP back on but I can get the stock recovery. Tried Kies but that didn't work. Been looking for stuff for a couple hours and can't seem to find an answer. Any help is appreciated, thanks.
Click to expand...
Click to collapse
Any update on this?
Sent from my SM-N900T using XDA Premium 4 mobile app

Everything is working perfect now and I'm on 4.4.2

TheAccomplisher said:
Everything is working perfect now and I'm on 4.4.2
Click to expand...
Click to collapse
What did you do to fix your problem?
Sent from my SM-N900T using XDA Premium 4 mobile app

[Q] ODIN fails when flashing stock firmware HELP!

My phone randomly stopped working the other day. When its off, it'll start up on its own (without the power button being touched) but only get past the "samsung" screen a couple times and then shut back off. I tried flashing the stock firmware via odin but it fails every time (I've used versions 1.86, 3.04 and 3.09). As of now, my phone is totally useless. All I can do is put it into download mode. Any ideas?
This is what odin says every time
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747UCALG1_I747ATTALG1_I747UCALG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Phone Screen:
ODIN MODE
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
QUALCOMM SECUREBOOT: ENABLE
Warranty Bit: 0
BOOTLOADER AP SWREV: 3
SW REV CHECK FAIL : Fused 3 > Binary 0

Odon is failing because you are trying to downgrade the firmware. After 4.3 you cannot do this anymore. It looks like you probably updated to 4.4.2 via ota. Correct? If so there is no firmware you can flash as att refuses to release it.
Take your battery out and put it back in. If it tries to turn on by itself your power switch is bad and needs replacing.
Sent from my SAMSUNG-SGH-T999 using Tapatalk

[N5100 Can't flash stock rom via ODIN] HELP!

Hi, i have a GT-N5100 running 4.4.2 Kitkat
My problem is i can't boot to recovery and it says:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again later.
But i can boot in Download Mode.
My phone keeps blinking and it won't charge, so, I've tried to flash the stock rom via ODIN and it says:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N5100XXDNG2_N5100OXEDNG1_N5100XXDNE2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> tz.img
<ID:0/003> boot.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
While flashing the ROM, i saw this code:
Code:
KNOX WARRANTY VOID 0
RP SWREV A1
And I've tried several times, but it always FAILS!
I've tried to go to Recovery mode through Kies,
>Firmware Upgrade and Initialisation >Type the Model Name: and it did not detect the Phone.
Hoping that someone can help me with this. Thanks guys!

rongregoryred said:
Hi, i have a GT-N5100 running 4.4.2 Kitkat
My problem is i can't boot to recovery and it says:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again later.
But i can boot in Download Mode.
My phone keeps blinking and it won't charge, so, I've tried to flash the stock rom via ODIN and it says:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N5100XXDNG2_N5100OXEDNG1_N5100XXDNE2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> tz.img
<ID:0/003> boot.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
While flashing the ROM, i saw this code:
Code:
KNOX WARRANTY VOID 0
RP SWREV A1
And I've tried several times, but it always FAILS!
I've tried to go to Recovery mode through Kies,
>Firmware Upgrade and Initialisation >Type the Model Name: and it did not detect the Phone.
Hoping that someone can help me with this. Thanks guys!
Click to expand...
Click to collapse
Use Odin v3.07 and flash in PDA mode. Also, make sure you have the right tar file for your Note and turn Kies off so it doesn't interfere with Odin.

CCallahan said:
Use Odin v3.07 and flash in PDA mode. Also, make sure you have the right tar file for your Note and turn Kies off so it doesn't interfere with Odin.
Click to expand...
Click to collapse
Thanks! I will try that! :good:
Edit: Fail. Did'nt work also. Hmm. I will try kies again.

rongregoryred said:
Thanks! I will try that! :good:
Edit: Fail. Did'nt work also. Hmm. I will try kies again.
Click to expand...
Click to collapse
If you are sure you have the correct file for your device and are using Odin correctly, might try using Heimdall to flash instead of Odin: http://glassechidna.com.au/heimdall/

I had a similar problem with my note 8.0. I can't remember exactly what I did but I managed to get it to reboot. It'll reboot to download but after it booted into download mode my Odin was able to find it.
---------- Post added at 09:19 PM ---------- Previous post was at 09:03 PM ----------
I think maybe holding down the power button should reboot it.

CCallahan said:
If you are sure you have the correct file for your device and are using Odin correctly, might try using Heimdall to flash instead of Odin: http://glassechidna.com.au/heimdall/
Click to expand...
Click to collapse
Tried heimdall, but no work. I think it's because of Knox. It won't flash Stock rom through Odin or heimdall.
BTW, i flashed a recovery through Odin and it works. Now im running a Custom Rom. Thanks for the help guys!

I'm currently in the same situation
What recovery did you flash?
I odin 4.4.4 poland.. it failed, it says Firmware upgrade encountered an issue. Please select recovery mode in Kies
I can't go to recovery, I tried to odin recovery but no luck
and in odin mode it says Secure Download : enabled
EDIT: I use philz_touch_6.48.4-n5100.tar.md5.. and it works