Related
Hi guys,
Since I'm newly registered I'm not allowed to write in the development forums so I'll post it here instead.
I've downloaded the B125 rom and I'm hosting a mirror if you are interested as the mirrors in the development thread was fairly slow.
NOTE: The site uses a self-signed certificate, so you may get a warning in your browser. Thats normal, I just can't affort a paid certificate myself.
h t t p s : / / files.idontgetlaid.com/data/public/67f7fa.php
The password is: ascendp6
The md5sum should be: a1147710ed758fe2eb1fadb760e2c56e
Just tell me if there are any problems.
Cheers
father_grissom said:
Hi guys,
Since I'm newly registered I'm not allowed to write in the development forums so I'll post it here instead.
I've downloaded the B125 rom and I'm hosting a mirror if you are interested as the mirrors in the development thread was fairly slow.
h t t p s : / / files.idontgetlaid.com/data/public/67f7fa.php
The password is: ascendp6
The md5sum should be: a1147710ed758fe2eb1fadb760e2c56e
Just tell me if there are any problems.
Cheers
Click to expand...
Click to collapse
maybe is just me.. but i got this error.... can`t go on download link
The site's security certificate is not trusted!
You attempted to reach files.idontgetlaid.com, but the server presented a certificate issued by an entity that is not trusted by your computer's operating system. This may mean that the server has generated its own security credentials, which Chrome cannot rely on for identity information, or an attacker may be trying to intercept your communications.
haydeezz said:
maybe is just me.. but i got this error.... can`t go on download link
The site's security certificate is not trusted!
You attempted to reach files.idontgetlaid.com, but the server presented a certificate issued by an entity that is not trusted by your computer's operating system. This may mean that the server has generated its own security credentials, which Chrome cannot rely on for identity information, or an attacker may be trying to intercept your communications.
Click to expand...
Click to collapse
Yeah it's a selfsigned certificate as it's my own server. But you should be able to just continue anyway, right? In chrome you usually get two option where one of them is to accept the self-signed certificate? The reason is that I only use https but I can't affort a paid certificate.
Here is another direct link http://dl.huaweinews.com/index.php?dir=Roms/Ascend-P6/&file=B125.zip
Ruchira88 said:
Here is another direct link http://dl.huaweinews.com/index.php?dir=Roms/Ascend-P6/&file=B125.zip
Click to expand...
Click to collapse
This PHP Script has an Anti-Leech feature turned on.
Make sure you are accessing this file directly from http://dl.huaweinews.com/index.php?dir=Roms/Ascend-P6/
http://dl.huaweinews.com/Roms/Ascend-P6/B125.zip
Ruchira88 said:
http://dl.huaweinews.com/Roms/Ascend-P6/B125.zip
Click to expand...
Click to collapse
That's 1GB. Is that ROM that big? I know a ROM is between 400 and 500 MB, not 1GB.
And if it's OK , do you have some detailed instructions on how to install?
HUAWEIAscendP6 said:
That's 1GB. Is that ROM that big? I know a ROM is between 400 and 500 MB, not 1GB.
And if it's OK , do you have some detailed instructions on how to install?
Click to expand...
Click to collapse
Its normal. Instructions are on the site huaweinews.com.
HUAWEIAscendP6 said:
That's 1GB. Is that ROM that big? I know a ROM is between 400 and 500 MB, not 1GB.
And if it's OK , do you have some detailed instructions on how to install?
Click to expand...
Click to collapse
1GB that is normal for Huawei stock firmware. Instruction for the installation is in the archive. There has a doc file with detailed instruction.
Thank's. I hope it can be installed over stock firmware BlueAndroid V02
HUAWEIAscendP6 said:
That's 1GB. Is that ROM that big? I know a ROM is between 400 and 500 MB, not 1GB.
And if it's OK , do you have some detailed instructions on how to install?
Click to expand...
Click to collapse
http://huaweinews.com/2013/12/ascend-p6-b125-firmware/
Ruchira88 said:
http://huaweinews.com/2013/12/ascend-p6-b125-firmware/
Click to expand...
Click to collapse
Thanks. I already have
Firmware version – B125 (International)
Android version – 4.2.2
Emotion UI version – 1.6
Kernel version -*3.0.8.795
HUAWEIAscendP6
This thread is intended on collect the information about Android 8 (Oreo) over the Android units that features:
PX5 Platform Core Board
MTCD/MTCE MCU Type
The information below is a copy of the same thread for Android 6 by @aarick
Post 2: Firmware
Post 3: Tips, Tricks and Fixes - Rooting instruction here
Post 4: Bugs/Issues
Post 5: Useful apps
Post 6: Useful links
For those not familiar with the PX5 Head unit, the specs are below:
OS: Android 8.0 Oreo
CPU: Rockchip PX5 A53 Octa-Core
RAM: 2GB or 4GB DDR3
ROM: 32GB
Audio output: 4*45W
Features:
Built-in Radio Tuner (RDS Enabled) (18 FM and 12 AM stations Preset)
Built-in USB & SD Slot
Region Free DVD Player
Screen Mirroring
Steering wheel controls (SWC) and Canbus interface
Optional compatible accessories:
DAB+ USB Tuner
TPMS
4G/3G Dongle
OBD02 Module
Camera
DVR
External Mic
The head unit comprises of two parts:
a MicroController Unit(MCU) board, which controls physical buttons and A/V inputs/outputs to/from the headunit. This board interacts with Android OS.
ANDROID part. The main Operating System.
Both MCU and Android ROM interact together to achieve the functionality of the head unit.
MCU
MCU type discussed here is MTCD or MTCE (if your unit has not MTCD/MTCE type MCU this thread is not for your unit)
MTCE is a software upgrade for MTCD, so they are identical in terms of hardware
Manufacturers.
The Manufacturer is identified by the XXX when consulting the MCU information under "device information" [MTCE_XXX_Version]. Take into accout that you should always refer the MANUFACTURER name (not the seller) on the forums for help/assistance. Giving the name for the Seller does not give any information but confusion.
e.g: MTCD_HA_1.93_1 (MTCD Unit with MCU for HotAudio under 1.93_1 version)
e.g: MTCE_GS_2.75 (MTCE Unit with MCU for GESHI manufacturer under 2.75 version)
Known manufacturers for MTCD/E PX5 are:
______________ _____________
GS = GE_SHI (ShenZhen GESHI Electronics And Technology CO.,LTD. Brands: KA JUN DA. Website: http://www.szgeshi.com )
KD = KU_DUO (Shenzhen Kuduo Electronic Technology Co. Ltd.)
HA = (Guangzhou Huge Circle Electronic Technology Co., Ltd. Brands: HOTAUDIO/DASAITA. webSite: http://www.hot-audio.com)
JY = JIE_YOU (Shenzhen Jieyou Electronic. Brands: JIE YOU J)
LM = LEI_MA (Lei Electronics Inc)
MX = MAI_XIN (Shenzhen Mai Xin Da Technology Co. Ltd)
ZH = ZHI_HANG (Guangzhou Zhihang Electronics Technology CO., LTD. Brands: WINCA/ROADNAV/STQ) http://www.roadnav.com.cn)
HZC = HANG_ZHI_CHEN (Same as ZH??)
HXD = HE_XIN_DA
KGL = KAI_GE_LE (Shenzhen Kaigele Electronics Co., Ltd Brands: HUIFEI. Website: http://www.kaigele.com/enus/)
KLD = KE_LAI_DE
KSP = KA_SI_PU (Kasi Pu Technology Co., Ltd. Shenzhen)
XRC = XIN_RUI_CHANG (Xinrui Electronic Technology Co. Ltd)
HLA = (Shenzhen Hualingan Electronic Co. Ltd. Brands:HUALINGAN. Website: http://www.dvdplayer.com.cn/)
(this list will be updated according to users report new manufacturers)
Some information I found on the CPU:
Rockchip PX5 Press Release
Firmware Post
MCU Upgrades Repository:
https://forum.xda-developers.com/showpost.php?p=72622240&postcount=2
ANDROID 8 (Oreo) stock Update List:
All the stock and custom PX5 MTCD/MTCE firmwares are valid for all PX5 MTCD/E units independently of manufacturer/seller/amount of RAM/amount of ROM
December 19th 2017. Source Dasaita. Thanks @hotaudio --> https://www.sendspace.com/pro/dl/kc1azp
January 8th 2018. Source HCT. Thanks @hotaudio --> https://www.sendspace.com/pro/dl/empate
January 18th 2018. Source GS. Thanks @kumarai --> https://yadi.sk/d/umCvHqCDzHccr/RockChip PX5 Android 8.0/GS
February 28th 2018. Source HCT. --> https://yadi.sk/d/umCvHqCDzHccr/RockChip PX5 Android 8.0/HCT
March 5th 2018. Source Dasaita. Thanks @hotaudio --> https://www.sendspace.com/pro/dl/v7cuby
March 13th 2018. Source Xtrons (GS). Thanks @catelusii --> https://1drv.ms/u/s!AjrY0uqbW_kBhCr0zB8pj-rIig_U
April 13th 2018. Source Dasaita (HA). Thanks @hotaudio https://www.sendspace.com/pro/dl/7smety
May 16th 2018. Source Dasaita (HA). Thanks @hotaudio
https://www.sendspace.com/pro/dl/q9mr31
June 11th 2018. Source Dasaita (HA). Thanks @hotaudio
https://www.sendspace.com/pro/dl/np2t2w
June 27th 2018. Source HCT. Thanks @fastebp
https://www.sendspace.com/pro/dl/nkez0x
July 5th 2018. Source Dasaita (HA). Thanks @hotaudio
https://www.sendspace.com/pro/dl/2l056f
July 17th 2018. Source Dasaita (HA). Thanks @hotaudio
https://www.sendspace.com/pro/lo8ztf
ANDROID 6.0 -> ANDROID 8 UPGRADE WARNING
Due to change in partition system and upgrade in recovery system, update can't be performed using the OTA Android 8 files over Android 6.0 as usual method (direct or Recovery) as it will result in an error (or could get a bricked device...)
The only available methods are:
1) Upgrade by using SDCARD slot:
Thanks to @marchnz for the Oreo ROM Dumping, to @kumarai for the recovery change procedure, to @SkyBeam2048 for the compiled solutions for Upgrading/Downgrading (and the comprehensive instructions)
The following Procedure can be used :
https://forum.xda-developers.com/showthread.php?t=3736950
Note1. Your unit MUST have a SDCARD slot with direct access to recovery (Not all SDCARD slots on all units can - some sdcard slots have been reported to be another usb port extension [USB3] and they will not work for upgrading)
Note2. USB port is not able to upgrade the recovery as required.
Click to expand...
Click to collapse
2) Upgrade by extracting the SOM and connecting a homemade OTG USB cable:
Instructions for making the OTG cable:
https://forum.xda-developers.com/an...px3-5-headunit-mod-recover-flash-som-t3766892
For upgrading via OTG cable it is recommended to use Rockchip Tools for the Android 6 to 8 upgrade from a PC (to put the unit into "loader Mode" and then flash the supplied firmware)
Custom Oreo Firmwares:
@Malaysk has been released a prerooted Android 8 image with several improvements and modifications:
https://forum.xda-developers.com/an...-malaysk-roms-px5-2-4-gb-8-0-android-t3762724
Tips, Tricks and Fixes
Root for stock ROMs.
[*] Method 1: SDCard & Flashing Update File
Android 8 ROM Root requires to boot.img to be modified and loaded during the Flasing process. @kumarai has been released a first Oreo Root files based on GS ROM from January.
This information is extracted from:
https://forum.xda-developers.com/showpost.php?p=75741195&postcount=519
ROOT rights for Oreo based on GS firmware from 20180118
Receiving the root only through the loading card. The load map contains a modified recovery, and the update.zip update is modified by the boot.
Download archive
Yandex - https://yadi.sk/d/pFSNkK4_3SwNx5
Google - https://drive.google.com/file/d/1xpz...GmaEPfsjd/view
The archive contains the following folders:
Androud-8-sdupdateROOT
CreateCD
SD Formatter
UpdateZIP-patch-root
- In the CreateCD folder, create a bootable card using SD_Firmware_Tool (the program is configured, no checkboxes are set)
- Image to create a map from the folder Androud-8-sdupdateROOT
- After creating the boot card, delete sdupdate.img from the card
- Copy from the UpdateZIP-patch-root folder to the root of the card's SD update.zip
We insert the card into the recorder, reboot, install the update from the SD Card
Remove the card and reboot the radio.
Map formatted with the program from the folder SD Formatter
The root system / app script writes to MagiskManager-v5.6.1.apk
Click to expand...
Click to collapse
[*] Method 2: Injecting supersu via ADB
Originally Posted by Copycat228
Hello!
Use the following instruction to receive permanent root on Android 8 using adb without flashing device:
On Head Unit, install terminal emulator on device and run two following commands and reboot device. This will open ADB witj root permissions on the port 5555
Code:
setprop persist.adb.tcp.port 5555
setprop sys.rkadb.root 1
On your PC, download latest "SuperSu" zip archive from official site, extract su binary from arm64 directory inside the archive
On your PC, create new file called "rooting.rc" with following content:
Code:
service rooting /system/bin/su --daemon
class main
priority 10
user root
oneshot
seclabel u:object_r:system_file:s0
From your PC run:
Code:
# adb connect "device_ip"
# adb root
# adb connect "device_ip"
# adb remount
# adb shell setenforce 0
# adb push su /system/xbin/su
# adb push su /system/bin/su
# adb shell chmod 06755 /system/bin/su
# adb shell chmod 06755 /system/xbin/su
# adb shell /system/bin/su --install
# adb shell /system/bin/su --daemon&
# adb push rooting.rc /system/etc/init/rooting.rc
On Head Unit, install SuperSu from PlayMarket and ask "NO" when application ask to update the module
Click to expand...
Click to collapse
Reboot and enjoy!
https://youtu.be/4v9s89fYIZ4
Bugs/Issues
Q&A
1. I have a MTCD RK3188 unit. Can I use the firmware updates here published?
No. All the stuff here published is for RK3368 (PX5) MTCD/E units. Only the MCU files could be used for your unit (if it is really a MTCD/E)
2. How do I know if my unit is a MTCD/E?
Go to Settings> Device Information and check the MCU version. it MUST be:
MTCD_XXXXX_yyyyy.
MTCE_XXXXX_yyyyy.
Where XXXXX is the acronym for the manufacturer and yyyy is the version for the MCU file
3. I cant find MTCDs MCU updates, but MTCE. Can I update a MTCE over a MTCD?
HCT developers, starting from MCU version 2.65, has been renamed the MCTD as MTCE. It is reported to be a major software update and it is fully compatible with MTCD MCU. Therefore, you can upgrade to MTCE from MTCD safely.
4. My MCU is XXX and i can't find new updates from manufacturer for a long time. Can I update from other Brand MCU?
Not all the MTCD MCUs are the same, but quite similar between them. There is a thread that is collecting all the MCU cross compatibility based on user experiences.
https://forum.xda-developers.com/an.../mtcd-verified-cross-compatible-mcus-t3624724
5. How Do I enter into recovery menu?
Depending on the HeadUnit, the entering into recovery process could vary.
Reset Button Procedure (You need a needle to access that button inside the Reset hole)
Applicable to:
[*] HeadUnits with no physical buttons on Headunit (just capacitive buttons) [Brands: Dasaita]
1. Press Reset and hold until button light blinks (15-20secs)
2. Release Reset and press again. Hold it until you see the Marshmallow logo
3. Release Reset and wait for the Recovery menu to appear
[*] Power Button Procedure [Brands: Dasaita]
Applicable to:
[*] HeadUnits with physical power button on Headunit [Brands: Dasaita]
[*]When none of the above procedures worked:
1. Disconnected all power from the unit... ACC & BAT disconnected
2. Prepared 12V power supply with on negative and two positive connectors
3. Connected negative to GND & one positive to BAT
4. Connected USB keyboard
5. Press right ALT (ALT GR on some keyboards) and PrintScreen
6. Connected the other positive lead to ACC (unit does not work if both BAT and ACC are not connected)
6a. Start pressing repeatedly on E (not holding E pressed, but press...release... press... release..... rapidly)
7. The boot logo shows (MarshMallow...etc) and after a few seconds the unit reboots itself
8. Release right CTRL & PrintScreen and continue to repeatedly press on E.
9. The Recovery shows on screen.
6. I have a complete Bricked Unit with a continuous loop. What can I do?
First of all, you have to try to reload the firmware into the unit. As you are not loaded into Android system, you must reload the firmware by using the recovery menu. To enter into recovery menu read the FAQ#5.
Most of the times, reloading the Android firmware solve the issue. Try with different firmwares if you can't succeed at first time. When, even having tried to update your firmware from recovery, but it did not succeed, you probably have corrupted your NAND. In that case a more complex solution is available (desoldering/soldering is required) to come the unit back to life. Thanks @marchnz for the detailed description on the following thread:
https://forum.xda-developers.com/an...tions-development/px5-stuck-bootloop-t3635412
7. My HeaadUnit never shuts off and, even several days, after switching engine on the Headunit starts in a few secons....Can I kill my car battery?
These units are designed to enter into deep sleep state detecting ACC off, in order to avoid each time you connect the car, you had to wait a full cold boot (20secs) and they just wake up in 2seconds. During This sleep state, the Headunit consumes a small current (just 100-150mA). Such current can't drain your battery.
Some manufacturers (like Dasaita (HA)) have implemented a menu in which, apart of Auto-Sleep you select at which time you want to HeadUnit shuts off completely, useful for long car unused periods.
8. My apps are killed during Sleep and they don't start again after waking up
These HeadUnits kills background processes (except specific ones) during deep sleep state (see Q&A#6). The killing process is managed by MTCManager.apk file. A developer (@graser) has been released a tool that is based on adding apps/services to a whitelist to pevent the unit killed them during sleep. You need root & Xposed Framework. Currently only working on Android 6. wait for a Android 8 upgrade
9.How can I root my unit?
PX5 devices under MM can be rooted easily by means of using kingoroot app (not kingroot), but Android 8 is more complicated (see Post#2)
10.My Bluetooth is not Working. What can I do?
Some specific implementations for MD725 bluetooth device are lack of necessary Blueooth SDK file into Android image. Currently no solution has been found apart from waiting HCT (software developers) to release an Android 8 upgrade with the required SDK included.
Useful apps
Tool Unpack Repack system.new.dat system.img For Windows v3
Current Oreo update file is based on a "update.zip" file (not classic .img file). When decompressing a file system.new.dat contains all the system information and apks. This tool can unpack and repack these kind of files:
https://forum.xda-developers.com/an...tool-tool-unpack-repack-dat-img-v2-0-t3284806
Useful links
Reserved
---------------
Interesting... Hoping for someone to release an upgrade method....
emre33 said:
ANDROID 6.0 -> ANDROID 8 UPGRADE WARNING
Bootable SDCard to GPS slot??? boot.img, uboot.img
Click to expand...
Click to collapse
What's that mean then?
Sent from my [device_name] using XDA-Developers Legacy app
Reverse camera interrupts head unit sound, is this a software limitation or hardware?
Reverse volume in settings
Sent from my [device_name] using XDA-Developers Legacy app
Hi,what is rar password?
jtheg said:
Reverse volume in settings
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
Will take a look tonight. Thanks
zeyret said:
Hi,what is rar password?
Click to expand...
Click to collapse
No password
Hi,
I have GS px5 HU how can I install it? Please help Thanks!
kispako89 said:
Hi,
I have GS px5 HU how can I install it? Please help Thanks!
Click to expand...
Click to collapse
YES!
Why don't we all jump in and ask that question without reading at least the first page
Hi, just bought my unit recently. Was very happy with the RK3188 version, just a little slow. This one is much faster, only the display is a big disappointment in my eyes. The colores are not really rich in contrast. Grey font on white background is not really readable. Is this the same issue for you too?
dboff said:
Hi, just bought my unit recently. Was very happy with the RK3188 version, just a little slow. This one is much faster, only the display is a big disappointment in my eyes. The colores are not really rich in contrast. Grey font on white background is not really readable. Is this the same issue for you too?
Click to expand...
Click to collapse
I don't know which specific model you have, but I have experienced some of the same. Grey on white is hard to see. I think it helps to view the screen from a more direct angle. I am also experimenting with a sun blocker for when the sunlight angle is very shallow. I may possibly try substituting a 10" screen from a 4gb Marshmallow model. And finally I've ordered a model with a 9" display which is not for my car but I believe it will fit, to see if the screen is any better. I think the 10" Intel Joyings had the best screen, incident light reflects off the pixels instead of the faceplate. Having said all that, the Oreo model I have seems useable, although I haven't taken it on what I would call a road trip yet.
As I still have not opened my Unit, looks like OTG USB is possible only on board modify at least according to https://forum.xda-developers.com/showpost.php?p=73057218&postcount=3 and based on provided schematics in https://forum.xda-developers.com/an...id-head-units-general/mtcd-schematic-t3637816 wonder if there is a way to simplify the process.
I'll have my new GS 8.0 PX5 4.0GB ram unit next week, I'll do a small comparison between my current GS 6.0 PX5 2.0GB unit.
Cheers
Mat
This thread is intended on collect the information about Android 9 (Pie) over the Android units that features:
PX5 Platform Core Board
MTCD/MTCE MCU Type
The information below is a copy of the same thread for Android 6 by @aarick and my own thread for Android 8
Post 2: Firmware
Post 3: Tips, Tricks and Fixes - Rooting instruction here
Post 4: Bugs/Issues
Post 5: Useful apps
Post 6: Useful links
For those not familiar with the PX5 Head unit, the specs are below:
OS: Android 8.0 Oreo
CPU: Rockchip PX5 A53 Octa-Core
RAM: 2GB or 4GB DDR3
ROM: 32GB
Audio output: 4*45W
Features:
Built-in Radio Tuner (RDS Enabled) (18 FM and 12 AM stations Preset)
Built-in USB & SD Slot
Region Free DVD Player
Screen Mirroring
Steering wheel controls (SWC) and Canbus interface
Optional compatible accessories:
DAB+ USB Tuner
TPMS
4G/3G Dongle
OBD2 Module
Camera
DVR
External Mic
The head unit comprises of two parts:
a MicroController Unit(MCU) board, which controls physical buttons and A/V inputs/outputs to/from the headunit. This board interacts with Android OS.
ANDROID part. The main Operating System.
Both MCU and Android ROM interact together to achieve the functionality of the head unit.
MCU
MCU type discussed here is MTCD or MTCE (if your unit has not MTCD/MTCE type MCU this thread is not for your unit)
MTCE is a software upgrade for MTCD, so they are identical in terms of hardware
Manufacturers.
The Manufacturer is identified by the XXX when consulting the MCU information under "device information" [MTCE_XXX_Version]. Take into accout that you should always refer the MANUFACTURER name (not the seller) on the forums for help/assistance. Giving the name for the Seller does not give any information but confusion.
e.g: MTCD_HA_1.93_1 (MTCD Unit with MCU for HotAudio under 1.93_1 version)
e.g: MTCE_GS_2.75 (MTCE Unit with MCU for GESHI manufacturer under 2.75 version)
Known manufacturers for MTCD/E PX5 are:
______________ _____________
GS = GE_SHI (ShenZhen GESHI Electronics And Technology CO.,LTD. Brands: KA JUN DA. Website: http://www.szgeshi.com )
KD = KU_DUO (Shenzhen Kuduo Electronic Technology Co. Ltd.)
HA = (Guangzhou Huge Circle Electronic Technology Co., Ltd. Brands: HOTAUDIO/DASAITA. webSite: http://www.hot-audio.com)
JY = JIE_YOU (Shenzhen Jieyou Electronic. Brands: JIE YOU J)
LM = LEI_MA (Lei Electronics Inc)
MX = MAI_XIN (Shenzhen Mai Xin Da Technology Co. Ltd)
ZH = ZHI_HANG (Guangzhou Zhihang Electronics Technology CO., LTD. Brands: WINCA/ROADNAV/STQ) http://www.roadnav.com.cn)
HZC = HANG_ZHI_CHEN (Same as ZH??)
HXD = HE_XIN_DA
KGL = KAI_GE_LE (Shenzhen Kaigele Electronics Co., Ltd Brands: HUIFEI. Website: http://www.kaigele.com/enus/)
KLD = KE_LAI_DE
KSP = KA_SI_PU (Kasi Pu Technology Co., Ltd. Shenzhen)
XRC = XIN_RUI_CHANG (Xinrui Electronic Technology Co. Ltd)
HLA = (Shenzhen Hualingan Electronic Co. Ltd. Brands:HUALINGAN. Website: http://www.dvdplayer.com.cn/)
(this list will be updated according to users report new manufacturers)
Some information I found on the CPU:
Rockchip PX5 Press Release
Firmware
Current PX5 Android 9 firmware development:
Stock
Date: March 22th 2019. Source: HCT. New UI --> https://yadi.sk/d/umCvHqCDzHccr/RockChip PX5 Android 9
Date: April 15th 2019. Source: Dasaita. Classic Blue UI from Dasaita --> https://www.sendspace.com/pro/dl/so9wg2
Date: May 3th 2019. Source: Unknown. --> https://yadi.sk/d/tyLXd4E-xXeylQ
Date: May 5th 2019. Source: MX. --> https://yadi.sk/d/DyLTKQsIQOx7Vg
Date: May 21th 2019. Source: Dasaita. --> https://www.sendspace.com/pro/dl/uv1jkf
Date: May 28th 2019. Source: Dasaita. --> https://www.sendspace.com/pro/dl/tso1eg
Date: May 31th 2019. Source: Dasaita. --> https://www.sendspace.com/pro/dl/yzg5we
Date: Jun 12th 2019. Source: MX. --> https://yadi.sk/d/nsQpvo_4yLv5BA
Date: Jul 31th 2019. Source: Dasaita. -->
https://www.sendspace.com/pro/dl/xj0pve
Date: Aug 13th 2019. Source: MX. -->
https://dosya.co/dpm1tyyojqxu/HCT4_PX5_9.0_Ota(20190813).7z.html
Custom
No custom firmwares have been released yet
Installation:
When upgrading from already Android 9:
Just copy the update.zip extracted from the downloaded OTA firmware downloaded into a root folder of a USB storage.
Upgrade system from Recovery or just update for the specific menu in settings
When upgrading from Android 6 or Android 8 (instructions taken from Hal9K thread)
a) If you have a sdcard slot:
Download Hal9k_Mod_3.x_upgrade_to_Android_9.0.rar
Uncompress it on PC
insert a recently FAT32 formatted micro SDcard into PC (by means of USB adaptor) --> It is recommended 8Gb or lower capacity for this purpose (max working 16Gb)
execute the SD_Firmware_Tool.exe file
Select the Drive which the sdcard is detected by your PC as target
Check that only the option "Update Firmware" is marked
on Firmware select the provided file: bootcard.img on Parent folder
Press "Create"
Wait for the bootable SDcard is created
Go to the Sdcard and replace the file sdupdate.img with the one provided on Parent Folder
in the HeadUnit:
insert micro sdcard on the slot marked as GPS/sdcard
reboot Unit -> Settings > Factory Settings: Password--> hctreboot
the recovery will be automatically upgraded and loaded into display
Use the USB with the upate.zip file in root folder and plug into the USB port
select on recovery: Upgrade system > From USB storage
The Android 9 image will be loaded into the headunit.
You can follow this video as well : https://www.youtube.com/watch?reload=9&v=EhEdeD5RICk
b) if you dont have a sdcard slot or previous metod does not work for you as your sdcard slot is just an USB extension
b1) By means of ModInstaller apk made by Hal9k
This is the easiest way for those who don't have sdcard slot.
Instructions here --> http://hal9k.ru/?page_id=207
b2) By means of OTG Cable
This procedure requires some kind of soldering knowledge and Android knowledge.
You must need a OTG USB cable (build your own) as per the following post:
https://forum.xda-developers.com/an...px3-5-headunit-mod-recover-flash-som-t3766892
Download Hal9k_Mod_3.x_upgrade_to_Android_9.0.rar and look for sdupdate.img file
Download BatchTool_1.7 or AndroidTool 2.39 from this post and download Drivers from this URL
Install the corresponding Drivers (select x86 or x64 depedning on your Windows version)
Open your Headunit and extract the PX5 SOM from the Motherboard
Connect the OTG USB cable into the PX5 SOM as per the previous thread and to the PC
Execute BatchTool.exe or AndroidTool.exe. In AndroidTool go to the Firmware Updte tab
The app will inform you that a USB is detected .
Load the sdupdate.img file on Firmware (FW) option
Press Upgrade button
When Upgraded...plug again the SOM into the Headunit...
Start unit and ente into recovery...you will find a 9.x.x recovery version
Proceed with the system upgrade as previous section from a USB storage
Note: if the app does not detect any device, check the drivers are installed
If the device is detected as mass storage, press oer the switch button to change the mode to a loader (the mode for the device to receive a flash file)
Reserved
Issues and Bugs
features:
Split screen --> Only on MX ROM
Issues found:
The clock is not updated when waking up from sleep --> Corrected from May updates
Not compatible Apps
Car Launcher Pro --> When trying to add a shortcut of an app, the list of selectable apps is blank
Useful Apps
Useful Apps for PX5 Android 9
MTCDialer 1.2.3 --> New Version for this app supporting for Android 9. Thanks @f1x & @scorillo_ro
https://github.com/scorillo/MtcDialer/releases/download/1.2.3/com.f1x.mtcdialer-1.2.3.apk
This app allows to Use Google Voice Assistant to Dial to your Contacts stored in your HeadUnit
To make a call just say a name of the contact stored in your PhoneBook, e.g. "Mom" or "Britney Spears" (if you have one ) or say some digits, e.g. "One One One Seven Six Five Four Two Zero"
No Internet Connection is required.
Reserved (6)
Great, but you should maybe change “ the information about Android 8 (Pie) over the Android units that features” to Android 9 (Pie)!
Done...the risk of the copy/paste
Enviado desde mi SM-G950F mediante Tapatalk
Hi everyone
I also switched to Android 9,
problems: clock not running from autosleep and missing TTS voice, I installed google speech synthesizer but it doesn't feel good.
does anyone have solutions?
Hi,
This update work for PX5 - MTCE_HXD?
Does it add the "Split Screen" feature that is missing from my head Unit?
Can someone tell me how to add this feature?
I have Android 9 but my builder has not enabled this option.
Thanks for your answer....
zimass said:
Hi,
This update work for PX5 - MTCE_HXD?
Does it add the "Split Screen" feature that is missing from my head Unit?
Can someone tell me how to add this feature?
I have Android 9 but my builder has not enabled this option.
Thanks for your answer....
Click to expand...
Click to collapse
sure you can as you have a MTCE unit
I have not tried the split screen, but i will
ikerg said:
sure you can as you have a MTCE unit
I have not tried the split screen, but i will
Click to expand...
Click to collapse
ok thank you, so I'll wait before updating.
I contacted the manufacturer who tells me that Android 9 does not support Spilt Screen on this head unit.
It's curious because Android 8 integrates this feature well
So I've the Android 9 May update on my Dasaita HU. It's really stable and the clock shows the correct time now. The only thing missing is the split screen but i guess it's s well known and discussed issue.
My question now is, I've seen a few videos and pics of Android 9 with white and dark interface (depending on the time of day), i can't see any setting in Dasaita PX5 HU to get this. Is there any compatable Android 9 Rom i can download to get this UI?
Sent from my SM-N950F using Tapatalk
That's possible to downgrade an PX5 MTCD Android 9 to Android 8 with Split screen option ?
naira1 said:
So I've the Android 9 May update on my Dasaita HU. It's really stable and the clock shows the correct time now. The only thing missing is the split screen but i guess it's s well known and discussed issue.
My question now is, I've seen a few videos and pics of Android 9 with white and dark interface (depending on the time of day), i can't see any setting in Dasaita PX5 HU to get this. Is there any compatable Android 9 Rom i can download to get this UI?
Sent from my SM-N950F using Tapatalk
Click to expand...
Click to collapse
That rom was the first one distributed by hct (I think) which published the own hal9k.
The rest of roms are based on different manufacturers. I dont know if the mx version is similar to the hct one or we need wait for new release of that specific version.
EDIT:
According to this video, the Last MX version has the ui you want and split is working as well
https://youtu.be/iht_nFyXo1I
Download it from second post
Remember that any rom for mtcd unit px5 is compatible to your unit...not only dasaita ones
Enviado desde mi SM-G950F mediante Tapatalk
zimass said:
That's possible to downgrade an PX5 MTCD Android 9 to Android 8 with Split screen option ?
Click to expand...
Click to collapse
It is possible
Enviado desde mi SM-G950F mediante Tapatalk
sorry but I'm a newbie with this type of update.
My head unit doesn't have SD card support.
But I have 2 USB ports.
When I put the update file at the root of the USB key the specific menu does not start the update.
How to update from the Recovery mode?
ps : the MX update link is broken ... Someone would know where to find the file?
---------- Post added at 05:04 PM ---------- Previous post was at 04:20 PM ----------
ikerg said:
It is possible
Enviado desde mi SM-G950F mediante Tapatalk
Click to expand...
Click to collapse
How to do ?
zimass said:
sorry but I'm a newbie with this type of update.
My head unit doesn't have SD card support.
But I have 2 USB ports.
When I put the update file at the root of the USB key the specific menu does not start the update.
How to update from the Recovery mode?
ps : the MX update link is broken ... Someone would know where to find the file?
---------- Post added at 05:04 PM ---------- Previous post was at 04:20 PM ----------
How to do ?
Click to expand...
Click to collapse
Read the post #2: SDCARD or OTG Cable that you must make by your own.
ikerg said:
Read the post #2: SDCARD or OTG Cable that you must make by your own.
Click to expand...
Click to collapse
By recovery mode
Update by USB it's not possible?
MX-link is broken. I would appreciate if you could create a new link.
Thanks
Only for
BQ Aquaris X2 (zangya)
BQ Aquaris X2 PRO (zangyapro)
Vsmart Active 1 (PQ6001 - rebranded X2 PRO)
Hello,
Since BQ shut down the JSON request service in October 2020, there have been no valid free alternatives in order to recover bricked devices with locked bootloader... and there certainly won't be any more from BQ (the bankruptcy procedure of Mundo Reader S.L. - BQ started in Spain at the beginning of February).
For this reason I've released a special emergency package + related instructions, that I have put together and tested over the past few weeks.
You may find everything in :
Web mirror on Yandex
or
Drivers/Tools + Firmware Repository on Telegram
Spoiler: Screenshots
Stage A - Emergency Package QFIL Flash
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
. .
Stage A - Emergency Package - First Boot
..
Stage B - IMEI / Baseband NVRAM checks & fix
...
The unbrick process requires:
1 compulsory stage ( A = Unbrick Flash )
1 additional stage ( B = IMEI / baseband fix ), which is only required if there are IMEI and/or SIM issues after the unbrick
Note: Please keep in mind that this is NOT a trivial 5 minute process. Anyone who owns a bricked X2 / X2 PRO device must read / follow the instructions carefully and spend around 1-2 hours to fully recover his device.
---------------------
Side Note : Such Emergency Package and related A-B instructions have been assembled & tested to use them ONLY with BQ Aquaris X2 - BQ Aquaris X2 PRO - Vsmart Active 1, that were running vendor-official firmware builds or conventional-unofficial releases (LineageOS, Ubports, etc.).
It is NOT technically compatible with the same HW models, that have been tampered instead to use a so-called "secure" firmware... = if this is your situation, please read the spoiler.
Spoiler: Side Note
Side Note : There are mainly non-technical reasons why, even after Europol dismantled Encrochat network on June 2020, no users with such tampered devices are finding any helpful wipe/flash-instructions in the public domain.
Indeed, the advices for the second/new owners of such (no longer working) devices haven't changed at all.
According to their specific scenarios/behaviours, it's up to them to choose from the following available options :
Try to return the device to the seller & get the money back
.
Contact the Police and provide the device & any information about the seller
.
Disassemble the device & resell the parts (all except the motherboard) as second-hand spare parts
.
Replace the motherboard with a (new or used) compatible one
wow thanks to you and the people that work on that guide !
is it suppose to work on old encrochat phone? cause i get this error with every firehose file.
Hello @randomrepairtech
randomrepairtech said:
wow thanks to you and the people that work on that guide !
Click to expand...
Click to collapse
You're welcome .
randomrepairtech said:
is it suppose to work on old encrochat phone? cause i get this error with every firehose file.
Click to expand...
Click to collapse
Such Emergency Package and related A-B instructions have been assembled & tested to use them ONLY with BQ Aquaris X2 - BQ Aquaris X2 PRO - Vsmart Active 1, that were running vendor-official firmware builds or conventional-unofficial releases (LineageOS, Ubports, etc.) = NOT technically compatible with the same HW models, that have been tampered instead to run such "secure" firmware.
Spoiler: Side Note
Side Note : keep in mind that there are mainly non-technical reasons why, even now - more than 8 months after the dismantling of the network, no users with such tampered devices are finding any helpful wipe/flash-instructions in the public domain.
Indeed, the advices for the second/new owners of such devices (no longer working) haven't changed at all.
According to their specific scenarios/behaviours, it's up to them to choose from the following available options :
Try to return the device to the seller & get the money back
.
Contact the Police and provide the device & any information about the seller
.
Disassemble the device & resell the parts (all except the motherboard) as second-hand spare parts
.
Replace the motherboard with a (new or used) compatible one
Hello, I really need your help, I think I just bought one of those phones with encrochat, but I would like to be sure, could you tell me if there is any way to know if it is one of those infected phones? first of all, Thanks
Sorry if you don't understand me, but I don't speak English, what you're reading is translated
RawMain said:
Hello @randomrepairtech
You're welcome .
Such Emergency Package and related A-B instructions have been assembled & tested to use them ONLY with BQ Aquaris X2 - BQ Aquaris X2 PRO - Vsmart Active 1, that were running vendor-official firmware builds or conventional-unofficial releases (LineageOS, Ubports, etc.) = NOT technically compatible with the same HW models, that have been tampered instead to run such "secure" firmware.
Spoiler: Side Note
Side Note : keep in mind that there are mainly non-technical reasons why, even now - more than 8 months after the dismantling of the network, no users with such tampered devices are finding any helpful wipe/flash-instructions in the public domain.
Indeed, the advices for the second/new owners of such devices (no longer working) haven't changed at all.
According to their specific scenarios/behaviours, it's up to them to choose from the following available options :
Try to return the device to the seller & get the money back
.
Contact the Police and provide the device & any information about the seller
.
Disassemble the device & resell the parts (all except the motherboard) as second-hand spare parts
.
Replace the motherboard with a (new or used) compatible one
Click to expand...
Click to collapse
Hello, I really need your help, I think I just bought one of those phones with encrochat, but I would like to be sure, could you tell me if there is any way to know if it is one of those infected phones? first of all, Thanks
Sorry if you don't understand me, but I don't speak English, what you're reading is translated
RawMain said:
Only for
BQ Aquaris X2 (zangya)
BQ Aquaris X2 PRO (zangyapro)
Hello,
Since BQ shut down the JSON request service in October 2020, there have been no valid free alternatives in order to recover bricked devices with locked bootloader... and there certainly won't be any more from BQ (the bankruptcy procedure of Mundo Reader S.L. - BQ started in Spain at the beginning of February).
For this reason I've released a special emergency package + related instructions, that I have put together and tested over the past few weeks.
You may find everything in :
Web mirror on Yandex
or
Drivers/Tools + Firmware Repository on Telegram
Spoiler: Screenshots
Stage A - Emergency Package QFIL Flash
View attachment 5232541 . View attachment 5232543 . View attachment 5232547
Stage A - Emergency Package - First Boot
View attachment 5232549.View attachment 5232551.View attachment 5232553
Stage B - IMEI / Baseband NVRAM checks & fix
View attachment 5232555.View attachment 5232557.View attachment 5232559.View attachment 5232561
The unbrick process requires:
1 compulsory stage ( A = Unbrick Flash )
1 additional stage ( B = IMEI / baseband fix ), which is only required if there are IMEI and/or SIM issues after the unbrick
Note: Please keep in mind that this is NOT a trivial 5 minute process. Anyone who owns a bricked X2 / X2 PRO device must read / follow the instructions carefully and spend around 1-2 hours to fully recover his device.
---------
Click to expand...
Click to collapse
Hello, I really need your help, I think I just bought one of those phones with encrochat, but I would like to be sure, could you tell me if there is any way to know if it is one of those infected phones? first of all, Thanks
Sorry if you don't understand me, but I don't speak English, what you're reading is translated
Thanks, good job.
I have a BQ Aquaris X5 Plus (gohan) in the same situation, bricked and locked bootloader.
I have stock ROM (2.7.0_20181002-1711-gohan-user-684-Fastboot-FW.zip) and BQ Firmware Flash Tool 5.0, but I don't have the JSON file to unlock it.
Qualcomm HS-USB QDLoader 9008 port is present, I could follow the instructions in this post, I can get most of the content of "EMERGENCY_PACKAGE" from the stock ROM, I only need the files for QFIL (firehose, RawProgram and Patch). I have searched long without result.
I would appreciate help.
Hello
xap3 said:
Thanks, good job.
Click to expand...
Click to collapse
You're welcome.
xap3 said:
I have a BQ Aquaris X5 Plus (gohan) in the same situation, bricked and locked bootloader.
[...]
Qualcomm HS-USB QDLoader 9008 port is present, I could follow the instructions in this post, I can get most of the content of "EMERGENCY_PACKAGE" from the stock ROM, I only need the files for QFIL (firehose, RawProgram and Patch). I have searched long without result.
Click to expand...
Click to collapse
The partitions you find inside the BQ fastboot firmware packages aren't enough to make full emergency/rescue packages. Several reserved partitions are missing indeed.
You can try to make a partial QFIL/EDL package... but keep in mind that such partial packages can't solve in most cases of BQ bricked devices with locked bootloader.
So, as for any BQ device with Qualcomm SOC, if you need/want to make a full QFIL/EDL package for Aquaris X5 Plus (gohan), you'll need anyway another working X5 Plus, in order to extract :
A full EDL dump of EMMC storage partitions, that will allow you to get those missing reserved partitions too
.
A QCN backup, that can be edited & used to restore/fix baseband + IMEIs of your KO device
Programmer & patch / rawprogram files for X5 Plus aren't so hard to find. Through a Google search - such as for instance this one - you can easily find the related references on Spanish and German forums.
Side note: this thread is only for messages / information exchange about the emergency package for BQ Aquaris X2 - X2 PRO & Vsmart Active 1 too (since such phone is just a rebranded X2 PRO without NFC hardware).
For any further & specific discussion/message about X5 Plus, you'd better post a new thread.
RawMain said:
The partitions you find inside the BQ fastboot firmware packages aren't enough to make full emergency/rescue packages. Several reserved partitions are missing indeed.
...
Click to expand...
Click to collapse
Thanks for your answer. I have a lot to learn ...
RawMain said:
Side note: this thread is only for messages / information exchange about the emergency package for BQ Aquaris X2 - X2 PRO & Vsmart Active 1 too (since such phone is just a rebranded X2 PRO without NFC hardware).
For any further & specific discussion/message about X5 Plus, you'd better post a new thread.
Click to expand...
Click to collapse
Sorry for using this thread to request help from another model.
Sincerely, thank you very much.
RawMain said:
Only for
BQ Aquaris X2 (zangya)
BQ Aquaris X2 PRO (zangyapro)
Vsmart Active 1 (PQ6001 - rebranded X2 PRO)
Hello,
Since BQ shut down the JSON request service in October 2020, there have been no valid free alternatives in order to recover bricked devices with locked bootloader... and there certainly won't be any more from BQ (the bankruptcy procedure of Mundo Reader S.L. - BQ started in Spain at the beginning of February).
For this reason I've released a special emergency package + related instructions, that I have put together and tested over the past few weeks.
You may find everything in :
Web mirror on Yandex
or
Drivers/Tools + Firmware Repository on Telegram
Spoiler: Screenshots
Stage A - Emergency Package QFIL Flash
View attachment 5232541 . View attachment 5232543 . View attachment 5232547
Stage A - Emergency Package - First Boot
View attachment 5232549.View attachment 5232551.View attachment 5232553
Stage B - IMEI / Baseband NVRAM checks & fix
View attachment 5232555.View attachment 5232557.View attachment 5232559.View attachment 5232561
The unbrick process requires:
1 compulsory stage ( A = Unbrick Flash )
1 additional stage ( B = IMEI / baseband fix ), which is only required if there are IMEI and/or SIM issues after the unbrick
Note: Please keep in mind that this is NOT a trivial 5 minute process. Anyone who owns a bricked X2 / X2 PRO device must read / follow the instructions carefully and spend around 1-2 hours to fully recover his device.
---------
Click to expand...
Click to collapse
Hi, i have the Aquaris X2 but i think it is in a worse state than just bricked. The phone looks like this and can take pictures and check the time. Unrecognizable by the pc and QFIL, unable to install drivers, unable to do anything. This are all the apps the phone has. Wonder if it is even possible to fix it.
Bushi1312 said:
Hi, i have the Aquaris X2 but i think it is in a worse state than just bricked. The phone looks like this and can take pictures and check the time. Unrecognizable by the pc and QFIL, unable to install drivers, unable to do anything. This are all the apps the phone has. Wonder if it is even possible to fix it.View attachment 5405939
Click to expand...
Click to collapse
Had you success recovered your phone? I have an Aquaris X2 with the totally same problem.
Tried @RawMain 's solution but failed during load partition process. I knew it's because I have no correct programmer file, but don't know how to solve it.
RawMain said:
Only for
BQ Aquaris X2 (zangya)
BQ Aquaris X2 PRO (zangyapro)
Vsmart Active 1 (PQ6001 - rebranded X2 PRO)
Hello,
Since BQ shut down the JSON request service in October 2020, there have been no valid free alternatives in order to recover bricked devices with locked bootloader... and there certainly won't be any more from BQ (the bankruptcy procedure of Mundo Reader S.L. - BQ started in Spain at the beginning of February).
For this reason I've released a special emergency package + related instructions, that I have put together and tested over the past few weeks.
You may find everything in :
Web mirror on Yandex
or
Drivers/Tools + Firmware Repository on Telegram
Spoiler: Screenshots
Stage A - Emergency Package QFIL Flash
View attachment 5232541 . View attachment 5232543 . View attachment 5232547
Stage A - Emergency Package - First Boot
View attachment 5232549.View attachment 5232551.View attachment 5232553
Stage B - IMEI / Baseband NVRAM checks & fix
View attachment 5232555.View attachment 5232557.View attachment 5232559.View attachment 5232561
The unbrick process requires:
1 compulsory stage ( A = Unbrick Flash )
1 additional stage ( B = IMEI / baseband fix ), which is only required if there are IMEI and/or SIM issues after the unbrick
Note: Please keep in mind that this is NOT a trivial 5 minute process. Anyone who owns a bricked X2 / X2 PRO device must read / follow the instructions carefully and spend around 1-2 hours to fully recover his device.
---------
Click to expand...
Click to collapse
Many thanks for your efforts, it's really clear and detail to do the job.
But... I can't unbrick my X2 cause loading partition error. One friend posted his problem as this in another thread (about load partition error,). Though you provided 4 programmer files, where could I download more to try? Or if we can full re-write all firmwares in this phone? Such as remove all partitions and re-build/re-write them?
(I had join the TG group and not found more information...)
Bushi1312 said:
Hi, i have the Aquaris X2 but i think it is in a worse state than just bricked. The phone looks like this and can take pictures and check the time. Unrecognizable by the pc and QFIL, unable to install drivers, unable to do anything. This are all the apps the phone has. Wonder if it is even possible to fix it.
Click to expand...
Click to collapse
Pokers Lin said:
Many thanks for your efforts, it's really clear and detail to do the job.
But... I can't unbrick my X2 cause loading partition error. One friend posted his problem as this in another thread (about load partition error,). Though you provided 4 programmer files, where could I download more to try? Or if we can full re-write all firmwares in this phone? Such as remove all partitions and re-build/re-write them?
(I had join the TG group and not found more information...)
Click to expand...
Click to collapse
Hello @Bushi1312 & @Pokers Lin
The situation of both your tampered devices is just the same as in post 3 of this thread = read the side note and related spoiler.
I have now included such note in the opening post too.
RawMain said:
Hello @Bushi1312 & @Pokers Lin
The situation of both your tampered devices is just the same as in post 3 of this thread = read the side note and related spoiler.
I have now included such note in the opening post too.
Click to expand...
Click to collapse
Thanks for your answer... so, you mean that my X2 had been installed as a "secured firmware" (named "encrochat"?) ? It's a bad news for me. Anyway, thank you very much, at least I can know why it's so hard to be fix now.
RawMain said:
Hello @Bushi1312 & @Pokers Lin
The situation of both your tampered devices is just the same as in post 3 of this thread = read the side note and related spoiler.
I have now included such note in the opening post too.
Click to expand...
Click to collapse
So basically it is impossible to fix it, right?
Bushi1312 said:
So basically it is impossible to fix it, right?
Click to expand...
Click to collapse
to fix what ?
do install the emergency firmware and unlock the firmware with ''fastboot flashing unlock''
then re install your genuine firmware with the emergency mode.
as simple as that
hello to everyone , i am in encrochat case , and i need a encrochat that was used from may 2020 .
i will buy , please can anyone help me ?
i need to prove that have a malware .
thanks in advance .
I have a BQ X2 with private mode could this solution work on it ?
Hlo guys I don't know were it will work or not but here is the file for your Chinese tablet firmware zh960_mb_v4.1_20180508
Brand : Random (Any device with zh960_mb_v4.1_xxxxxx)
Model : same as brand
Chipset : mt6582
Android version :4.4.2
Here is the link to download : https://firmware.gem-flash.com/index.php?a=downloads&b=folder&id=51836
Note : Only sign uped members can download wana download sign up fast one member can download file in 24hrs.
Comment below who got the firmware working !!!
Main : https://drive.google.com/u/0/uc?id=1RKT06Q4hvluQETq1gLgSj7pPqEaCegev&export=download/
Hilal GR BRO said:
Hlo guys I don't know were it will work or not but here is the file for your Chinese tablet firmware zh960_mb_v4.1_20180508
Brand : Random (Any device with zh960_mb_v4.1_xxxxxx)
Model : same as brand
Chipset : mt6582
Android version :4.4.2
Here is the link to download : https://firmware.gem-flash.com/index.php?a=downloads&b=folder&id=51836
Note : Only sign uped members can download wana download sign up fast one member can download file in 24hrs.
Comment below who got the firmware working !!!
Main : https://drive.google.com/u/0/uc?id=1RKT06Q4hvluQETq1gLgSj7pPqEaCegev&export=download/
Click to expand...
Click to collapse
Hi, thanks for link... I just did it and Flashed finish well
But, my tabs become Blank screen..... ( only blur lines) can't see clearly
What's should I do next?
Please help....
Thanks anyway
Jowarnerrin said:
Hi, thanks for link... I just did it and Flashed finish well
But, my tabs become Blank screen..... ( only blur lines) can't see clearly
What's should I do next?
Please help....
Thanks anyway
Click to expand...
Click to collapse
Did you try two links