I found this QUICK SETTINGS MOD, It original is for Samsung Galaxy Nexus. but it said will work for any De-Odexed AOSP Android 4.3 .
http://forum.xda-developers.com/showthread.php?p=34290751#post34290751
Is it working in our Moto G?
yuanw said:
I found this QUICK SETTINGS MOD, It original is for Samsung Galaxy Nexus. but it said will work for any De-Odexed AOSP Android 4.3 .
Is it working in our Moto G?
Click to expand...
Click to collapse
Haven´t tried but it says " De-Odexed AOSP " stock rom is ODEXED so i´m guessing it won´t work, why don´t you try this > Gravity Box works fine here take a look
Thank you. That's what I want.
I can confirm that this doesnt work. I tried flashing it and pushing to system with no joy.
mangusmeister said:
I can confirm that this doesnt work. I tried flashing it and pushing to system with no joy.
Click to expand...
Click to collapse
You have to install Xposed Framework first. Then enable the module in 'Xposed Installer' and reboot.
Actually i dont think its an xposed module. cant see where it says that in the original thread?
Enlighten me? lol
Sorry, you are right. I mistook ferreinf's post about Gravity Box with the OP.
No worries mate, happy flashing.
mangusmeister said:
I can confirm that this doesnt work. I tried flashing it and pushing to system with no joy.
Click to expand...
Click to collapse
Thank you for your answer.
Just use Gravity Box
Related
Since there are many people asking for this mod which is available on CM9/10, I was searching a bit and finally got it working. It works on any ICS/JB rom but I havent tried on GB. Thanks to rovo89 and stole38. Make sure you are following all steps correctly because if not, your phone will be stuck in a bootloop. OK, here we go ! :fingers-crossed:
Requirements:
1) Root
2) init.d Support
3) Brain
Installation:
1. Download this APK file and install it on your phone (Xposed Installer) HERE
2. Download this second app and install it on your phone (Xposed Tweakbox) HERE
3. Open the Xposed Installer and press Install/Update. Wait.
4. After installing the framework, press Soft Reboot. The phone will reboot and might boot longer than usual, dont panic
5. After the phone has rebooted, open the Xposed Installer again and go to the Modules tab.
6. Check Xposed Tweakbox. And exit the Xposed Installer.
7. Open the Xposed Tweakbox app and choose Miscellaneous from the menu.
8. Check Skip tracks with volume keys
9. Exit the application and reboot the phone
10. Enjoy !
NOTE: It works only when the screen is off (locked).
Awesome, just what I was looking for
Any bugs?
Sent from my LT26i using xda premium
Nice!
I can confirm that it works on stock .55 :good:
The tweakbox app says it can also enable the cool CRT screen off animation but i havent been able to get it to work, it says 'you need a special version of libsurfaceflinger.so to use these effects'
Any ideas where i xcan get the 'special' version of libsurface flinger.so??
Thanks for any help
Yes,.i will upload soon
Sent from my Xperia Power
DavidMKD said:
Yes,.i will upload soon
Sent from my Xperia Power
Click to expand...
Click to collapse
Works perfect. Thanks. Waiting for the old Tv effect
Sent from my LT26i using Tapatalk
The libsurface flinger.so file (library) is not compatible with out NXT devices causing them to restart and enter bootloop once replaced in system/lib (library). It can be only done in CM9/10. Will try to port it these days, but i dont promise anything.
Works in XTXperience 9!! Thanks bro!! :good:
DavidMKD said:
The libsurface flinger.so file (library) is not compatible with out NXT devices causing them to restart and enter bootloop once replaced in system/lib (library). It can be only done in CM9/10. Will try to port it these days, but i dont promise anything.
Click to expand...
Click to collapse
Gutted, good luck with porting it :fingers-crossed:
Can I uninstall this two apk's after applying mod and it will be still working?
michalmx0 said:
Can I uninstall this two apk's after applying mod and it will be still working?
Click to expand...
Click to collapse
Well havent tried that but I think you can since its framework editing. Not sure
Works perfect in KA21, but I have a question, how we can include this mod in a rom? Thanks
charlymaster said:
Works perfect in KA21, but I have a question, how we can include this mod in a rom? Thanks
Click to expand...
Click to collapse
Yes
DavidMKD said:
Yes
Click to expand...
Click to collapse
You did not understand me, I asked "if you know how?"
Thanks!
This only changes the framework-res?
sorry for my bad english D:
Thank's it work
If You uninstall only installer this still work,if You uninstall tweakbox this dosn't work
charlymaster said:
You did not understand me, I asked "if you know how?"
Click to expand...
Click to collapse
As long as android.policy.jar stays the same
It's Work !! :good::good:
Awesome!!
CRT are worked in KA24
Skip track too
Wake up on unplug too
Very great!!!
Here it is what you all been waiting for. Drum roll.........
Split View
Ported from the LG G-Flex by me.
Disable any Xposed module before flashing. Flash in recovery and reboot. I have allowed all apps in Split View , though some may not work properly if at all.
To initiate Split View, hold back button for about a second. The rest is self explanatory.
Download the latest G2 Xposed beta that works with Split View. Thanks to BlackDino
https://drive.google.com/#folders/0B1DkkdNkAnSIODlteFFKTEtBZm8
Then go into help, click "SplitView mod is not working", enable it, set your longpress to launch SplitView.
BUGS:
You may find that posting pics or uploading through Tapatalk , Hangouts will be broken.( You can post to Hangouts by selecting image using a file manager)
Opening Tapatalk notification will cause a FC
To fix the posting of pic or to just turn off Split View use a file explorer and delete this line or change it from true to false "ro.lge.capp_splitwindow=true" and reboot.
Uninstalling apps that can be used in Split View may cause a FC of Split View Services
For now to deal with this FC you must hold your power button until your phone reboots.
CONFIRMED WORKING
D800
D802
VS980
LS980
D805
D801V11B Videotron
D803
DOWNLOADS
Split View Installer
Split View Remover
3rd party navigation bar support (Provided BY BlackDino) Simply point to this app
SplitViewLauncher.apk
Developers feel free to use this in your roms. Just give proper credit for what you are using.
Have fun and enjoy
Good Job Sir.. I really wished I had this phone..
I did it right, missed the permissions!!!!!!! Urgh..
Jishnu Sur™ said:
Good Job Sir.. I really wished I had this phone..
I did it right, missed the permissions!!!!!!! Urgh..
Click to expand...
Click to collapse
Thank you sir.
Great! Downloading now to test.
---------- Post added at 11:10 PM ---------- Previous post was at 11:09 PM ----------
With all new mods we need a dev to make a good working ROM in ourVerizon section
LG D802 Stock odex - boot loop (
Is it really only 499kb?
Sent from my LG-D802 using xda app-developers app
Borisov said:
LG D802 Stock odex - boot loop (
Click to expand...
Click to collapse
Huh. Did you recover yet?
Damn, bootloop on stock D802 odexed.
@bigfau
Can you explain how activate splitview, please? You don't have ported also Lgsystemui.apk so I (but also other users) can't understand how activate it. Thanks for reply and also for your zip. I've all your file my in my version i don't know how activate without lgsystemui.apk. On international ver. Lgsystemui.apk from G flex work without FC on deodex rom
acer73 said:
@bigfau
Can you explain how activate splitview, please? You don't have ported also Lgsystemui.apk so I (but also other users) can't understand how activate it. Thanks for reply
Click to expand...
Click to collapse
As it states in the OP, you hold the back button.
bigfau said:
Huh. Did you recover yet?
Click to expand...
Click to collapse
I restored from backup
Tryed wipe cache after flashing mod - bootloop again
I am stuck in boot loop as well. Verizon stock. How do I revert it other than restore from backup? Thanks.
Borisov said:
I restored from backup
Tryed wipe cache after flashing mod - bootloop again
Click to expand...
Click to collapse
Did you have Xposed installed and was it active before flashing ?
I'm trying to find a common link.
dhuangxda said:
I am stuck in boot loop as well. Verizon stock. How do I revert it other than restore from backup? Thanks.
Click to expand...
Click to collapse
Lol, restore from backup or flash rom again.
bigfau said:
Did you have Xposed installed and was it active before flashing ?
I'm trying to find a common link.
Click to expand...
Click to collapse
I have it
bigfau said:
As it states in the OP, you hold the back button.
Click to expand...
Click to collapse
Thanks mate I can confirm you that on rayglobe deodex work good. On odex ver bootloop but I'm searching why...
acer73 said:
Thanks mate I can confirm you that on rayglobe deodex work good. On odex ver bootloop but I'm searching why...
Click to expand...
Click to collapse
Thank you. I pulled the links because I didn't want people the keep posting the same issue.
bigfau said:
Did you have Xposed installed and was it active before flashing ?
I'm trying to find a common link.
Click to expand...
Click to collapse
Disabled Xposed before flashing - bootloop again
Borisov said:
Disabled Xposed before flashing - bootloop again
Click to expand...
Click to collapse
Thank you Borisov. The hunt continues
I wonder why you are taking so much trouble sir? The deodexed apps work just fine on odexed ROMs as well..
Hi all , we all know that xposed module can bring to our stock rom some option that we can found at the officiel release .
I m a noob in developement , so can some one told me , why we can not make a module who can activate the aircommande option in the stock rom for our lovely n7100 ! its all about software here !
no one can explain why its not possible ?
because the function is embedded inside multiple apps and multiple dll which is not in the stock files at all. xposed module can exploit something that was hidden... but it cannot add something that wasn't there...
AbOoM said:
Hi all , we all know that xposed module can bring to our stock rom some option that we can found at the officiel release .
I m a noob in developement , so can some one told me , why we can not make a module who can activate the aircommande option in the stock rom for our lovely n7100 ! its all about software here !
Click to expand...
Click to collapse
Bacause the Air Command feature is not like something that you can flick on/off just via a Xposed module.It requires lots of work to get it to work.
edan1979 said:
because the function is embedded inside multiple apps and multiple dll which is not in the stock files at all. xposed module can exploit something that was hidden... but it cannot add something that wasn't there...
Click to expand...
Click to collapse
Thank you for the answer , i understand now !
so i think that there are no way to add this option in the stock rom ?
AbOoM said:
Thank you for the answer , i understand now !
so i think that there are no way to add this option in the stock rom ?
Click to expand...
Click to collapse
Not if Sammy decides to add them in.
Hi All
Today i want to share you all a simple modding file to disable annoyed Mobile Data Notification. Flash in recovery
Test on my Z5D, MM 6.0.1 rooted, deodexed.
devilmaycry2020 said:
Hi All
Today i want to share you all a simple modding file to disable annoyed Mobile Data Notification. Flash in recovery
Test on my Z5D, rooted, deodexed.
Click to expand...
Click to collapse
It would be nice if you could disable the Sync pop-up message as well when you turn it OFF/ON from the Notification.
Work for z1?
Glex01 said:
Work for z1?
Click to expand...
Click to collapse
I don't know, just try it and see. Backup before flash file.
I use an xposed module called xphoneplus to disable it. I'm using other xposed modules any way.
venomxob said:
I use an xposed module called xphoneplus to disable it. I'm using other xposed modules any way.
Click to expand...
Click to collapse
You are welcome.
venomxob said:
I use an xposed module called xphoneplus to disable it. I'm using other xposed modules any way.
Click to expand...
Click to collapse
Which module disables this plz ? Does it work in 6.0.1 ?
GryTEcHoG said:
Which module disables this plz ? Does it work in 6.0.1 ?
Click to expand...
Click to collapse
Xphone plus disables it. It works on 6.0.1. I'm currently using it on stock .575
Work on my M2 2303 5.1.1 nice.
Works on MM beta .238 Z3C (manual install)
devilmaycry2020 said:
Hi All
Today i want to share you all a simple modding file to disable annoyed Mobile Data Notification. Flash in recovery
Test on my Z5D, MM 6.0.1 rooted, deodexed.
Click to expand...
Click to collapse
Works fine by manual install.
Flashing zip did not work.
Thanks!
@devilmaycry2020,want to ask,if want remove it permanently,which apk should be edited sir?
Mirza_H said:
@devilmaycry2020,want to ask,if want remove it permanently,which apk should be edited sir?
Click to expand...
Click to collapse
It's permanent already mate. It's a easy method. If you don't want to use this method you can edit file TeleService.apk. I've tried to edit TeleService.apk before but it's seem have problem with sim card. It didn't recognize carriers network.
I use module in Xposed
DTN Disabler
https://goo.gl/tgT65g
devilmaycry2020 said:
It's permanent already mate. It's a easy method. If you don't want to use this method you can edit file TeleService.apk. I've tried to edit TeleService.apk before but it's seem have problem with sim card. It didn't recognize carriers network.
Click to expand...
Click to collapse
thanks, I just want to try it without using this overlay, but I've tried to use this overlay and it works well .
another xposed module to look into would be notify clean, works for all android notifications.
working on m4 aqua (e2306) 6.0.1
the zip is installing the overlay in /system/oem/overlay
that folder is not used in many roms, the real one is /system/vendor/overlay
that's why is not working in some models
thanks for sharing!!
sergioslk said:
working on m4 aqua (e2306) 6.0.1
the zip is installing the overlay in /system/oem/overlay
that folder is not used in many roms, the real one is /system/vendor/overlay
that's why is not working in some models
thanks for sharing!!
Click to expand...
Click to collapse
Thanks for the info. Just update the right file.
Thank you @devilmaycry2020 .. now it works on my Xperia Z2...
I just put this mod in with my Zip Mod Installer but since it works without having to install one of my bases I thought I would put it out here. This mod doesn't affect the navbar like my first one (where it turned black also) so you don't have to remove it if you don't want to. Flash in TWRP. A Magisk version is available also but it too must be installed via TWRP. STOCK ONLY
Regular uploaded 2-9-19
https://www.androidfilehost.com/?fid=1395089523397888331
Regular edge sense compatible (don't flash edge sense module, just install the app)
https://www.androidfilehost.com/?fid=1395089523397888333
Magisk uploaded 2-9-19
https://www.androidfilehost.com/?fid=1395089523397888329
Magisk edge sense compatible (don't flash edge sense module, just install the app)
https://www.androidfilehost.com/?fid=1395089523397888327
Tulsadiver said:
I just put this mod in with my Zip Mod Installer but since it works without having to install one of my bases I thought I would put it out here. This mod doesn't affect the navbar like my first one (where it turned black also) so you don't have to remove it if you don't want to. Flash in TWRP. A Magisk version is available also but it too must be installed via TWRP.
Regular uploaded 1-17-19
https://www.androidfilehost.com/?fid=11410963190603903070
Magisk uploaded 1-17-19
https://www.androidfilehost.com/?fid=11410963190603903075
Click to expand...
Click to collapse
Thanks for mod. Somehow the magisk version doesn't do anything on my device... It's activated in magisk but status bar stays as it was before.
Donric13 said:
Thanks for mod. Somehow the magisk version doesn't do anything on my device... It's activated in magisk but status bar stays as it was before.
Click to expand...
Click to collapse
Do you have edge sense installed?
Tulsadiver said:
Do you have edge sense installed?
Click to expand...
Click to collapse
Yes. Aha this seems the problem i think..... Any solution?
Donric13 said:
Yes. Aha this seems the problem i think..... Any solution?
Click to expand...
Click to collapse
I'll make an edge sense version when I get to work.
Donric13 said:
Yes. Aha this seems the problem i think..... Any solution?
Click to expand...
Click to collapse
Did you try edge sense after you installed my mod and uninstalled active edge module? I didn't think he did any smali editing so it should work with just using his app.
Tulsadiver said:
Did you try edge sense after you installed my mod and uninstalled active edge module? I didn't think he did any smali editing so it should work with just using his app.
Click to expand...
Click to collapse
Edgesense is still working after installation of your mod. Both modules are active in magisk. I'll try disabeling his mod and report.
No success. Disabeling his mod and edge sense app isn't working. But also your mod isn't working. Deinstalled edge sense mod (deleted modul in magisk) and reinstalled your mod. Didn't work. Here some screenshots
Donric13 said:
No success. Disabeling his mod and edge sense app isn't working. But also your mod isn't working. Deinstalled edge sense mod (deleted modul in magisk) and reinstalled your mod. Didn't work. Here some screenshots
Click to expand...
Click to collapse
You might have other modules interfering. Looks like you have quite a few.
Tulsadiver said:
You might have other modules interfering. Looks like you have quite a few.
Click to expand...
Click to collapse
Hmm... Deactivated all other modules than yours. Still no success. Maybe something still remains somewhere... Anyway thanks for your good work for all those devices. Gonna try again after a clean flash (propably next security patch....).
Donric13 said:
Hmm... Deactivated all other modules than yours. Still no success. Maybe something still remains somewhere... Anyway thanks for your good work for all those devices. Gonna try again after a clean flash (propably next security patch....).
Click to expand...
Click to collapse
Here is how you should do it after I upload a edge sense version.
Flash flash-all.bat after taking out the -w so data won't wipe.
Reboot
Boot back into bootloader
fastboot boot TWRP.img
Flash TWRP.zip
Flash Magisk uninstaller
Flash kernel if you like
Flash magiskv18
Reboot verify root
Boot into TWRP
Flash my regular edge sense mod, not Magisk version
Reboot
Proceed to install all of your modules minus edge sense module
Done
Okay. Let's flash... Gonna start already with flashing factory image to be prepared. Thanks.
Donric13 said:
Okay. Let's flash... Gonna start already with flashing factory image to be prepared. Thanks.
Click to expand...
Click to collapse
I just uploaded what should be edge sense compatible mods.
Tulsadiver said:
I just uploaded what should be edge sense compatible mods.
Click to expand...
Click to collapse
:good: working perfect. Just installed the non magisk module and now it works as intended (black status bar and edge sense) ! Big thanks. Now gonna install other modules (exept edge sense).
Tulsadiver said:
I just uploaded what should be edge sense compatible mods.
Click to expand...
Click to collapse
Hello,
thanks for making this. i tried installing for magisk and its not working for me (stock/rooted 3XL). no edge sense apps/magisk modules installed. I'm willing to try the non-magisk version, but i don't see anything in the OP about how to remove this if i don't like it.
Also, does this enable two rows of notifications like in your screenshot? Thanks!
hochoch said:
Hello,
thanks for making this. i tried installing for magisk and its not working for me (stock/rooted 3XL). no edge sense apps/magisk modules installed. I'm willing to try the non-magisk version, but i don't see anything in the OP about how to remove this if i don't like it.
Also, does this enable two rows of notifications like in your screenshot? Thanks!
Click to expand...
Click to collapse
I can give you a restore to flash. The two rows of statusbar are available in my other thread (ADB and Zip installer). If you haven't installed any modules then the regular one would be the right one.
Works great with Round Screen app from the Play Store. It's the only rounded corner overlay app I've tried that doesn't have a persistent notification. @Tulsadiver any plans on making native round corners in the mod?
widezu69 said:
Works great with Round Screen app from the Play Store. It's the only rounded corner overlay app I've tried that doesn't have a persistent notification. @Tulsadiver any plans on making native round corners in the mod?
Click to expand...
Click to collapse
It is native as is. I didn't make the screen square. All I did was change the status bar black. I've tried a few things to try and get it rounded but so far it hasn't worked.
Anybody tried this mod on february security update? I'm on holiday and cant update to february build before saturday...
Edit: seems SystemUI.apk has no changes in february update. So i think the mod will work with no issues.
SystemUI changed. So flashing this mod on february update leads to bootloop... But is no problem because now this mod seems to be integrated in flashable zips in Tulsadiver's main thread. There all is updated to february patch. So no need to update this mod.