Related
Hi,
is there any way to change brightness to lower level? My previous phone, Xperia Mini, could decrease brightness to absolute black (I didn't need it, but still...). But my Xperia M is still pretty shining in dark even in the lowest level. It burns my eyes. All I could find were some stupid filters. Is there any better solution (root or not, I don't care).
Thanks.
dave_lister said:
Hi,
is there any way to change brightness to lower level? My previous phone, Xperia Mini, could decrease brightness to absolute black (I didn't need it, but still...). But my Xperia M is still pretty shining in dark even in the lowest level. It burns my eyes. All I could find were some stupid filters. Is there any better solution (root or not, I don't care).
Thanks.
Click to expand...
Click to collapse
Click
Gravitybox has some brightness abilities to reassign lux-brightness pairs. Don't know if it can go under normal brightness though...
FindYanot: That's exactly what I don't want. I want something on HW level (lower led (or what they use) intensity), not just transparent black layer.
KoenGo: Do you think, it can work? I don't have root yet (I want do it, if I find solution), so I can't try.
Nobody faced this problem? Everyone is happy with light intensity?
Yes it's too much but if you lower that level screen will probably start flickering which is much more annoying than just too bright screen. This is common, hw related issue that can be found on other devices with low quality lcd.
I'm trying but it's kinda hard to tell if there's any difference since you have to reboot after applying new minimum. I would say there isn't much difference. I'll retry in the dark some time.
Doesn't crash or flicker or anything though, so that's the good news
Personally, I would not root just for this and just use the filters. What is your problem with them? That it uses more battery than a hardware method would, or just that it's impractical? In the second case, lux might be worth looking into. I've never tried it myself since it isn't free, I just use the filter u hate
Tried it in the dark and I believe there is a difference, although very small (barely noticeable) and imho definitely not worth rooting and installing framework.
OK. That's bad, but thanks for your time
Well I rooted my phone and I tried gravitybox and I don't think there is a difference. But still thanks.
My setup now is that I can (de)activate the filter app by swiping over the navigationbar. It's still a filter so it doesn't prolong battery life or anything, but it is a convenient way to enable or disable it.
If you would ever come across something better, please let us know
dave_lister said:
is there any way to change brightness to lower level?
Click to expand...
Click to collapse
Yes, but you need root.
Execute in Terminal or run attached file as script via Root Explorer / GScript:
Code:
#!/system/bin/sh
su
echo 5 > /sys/class/leds/wled/brightness
Minimal stock value 27, we change it to 5 or any other you want.
Maximum value: 255
Bug: backlight will be flickering.
Thank you. It really works! (I rewrite it manually without any script or terminal)
Just one thing. The brightness file is used for current state and when I change intensity in options (or select auto), it's rewritten. So, is there any way to change minimum level permanently (minimum on bar or 0 lux = 5 or something instead of stock 27)? Or is it possible to make some shortcut to rewrite the file with one click? Or use some tasker for it?
But it doesn't matter much. Even this way, without any shortcuts, is awesome. I'll test it in night, but even now (during a day), I can see a difference.
dave_lister said:
So, is there any way to change minimum level permanently
Click to expand...
Click to collapse
Yes, but only by editing file in kernel, it requires recompiling.
Then pulled slider to the left will set really minimal value.
Here commit from ElixER kernel for 4.1.2, originally this trick comes from there.
dave_lister said:
Or is it possible to make some shortcut to rewrite the file with one click? Or use some tasker for it?
Click to expand...
Click to collapse
Yes, GScript app, as far I know can create shortcuts.
Or in Tasker create task with only one action "Run shell" (tick Root) and then create shortcut in launcher.
iks8 said:
screen will probably start flickering which is much more annoying than just too bright screen. This is common, hw related issue that can be found on other devices with low quality lcd.
Click to expand...
Click to collapse
Always was interesting what exactly causing this flickering at hardware side. Led's controller?
Please can you provide any information and example devices with same issue?
Bonoboo said:
Always was interesting what exactly causing this flickering at hardware side. Led's controller?
Please can you provide any information and example devices with same issue?
Click to expand...
Click to collapse
For example galaxy tab 2 (I have one), on the lowest brightnes level it flicker a lot (especially annoying when it's displays white surface), my sister's asus memo pad 7 hd has this issue too but less noticible. Yes, it's somehow related to device's power managment, in galaxy tab 2 forum people saies that it's flicers more when wifi signal is low so as I understand: low signal -> device need more power for wifi -> device gives less power for leds -> screen is more flickering but I could be wrong since I'm almost total electroinc noob I will test that later
p.s.
This issue is really common, even s4 has this problem according to this https://www.youtube.com/watch?v=5yZaQRr76f8 So Sony has done good move with setting so high the lowest brightnes level (at least this hides unusable levels). Really my eyes hurt when I'm using my gtab2 at night although xperia does the same thing but in different way xD
Tested your method and at least in my device, the LED flickering was barely noticeable and only appeared when I set very low values (like 1). Setting as 3 and onwards gives zero flickering here (or I'm just blind, not noticing it)...
You're right. Values about 3, 4, 5 are quite ok.
I made the GSscript shortcut and I¨m finally happy.
I think the flickering is caused by pwr regulation with low frequency. But I'm not electrician either.
If any of you clever developers / tinkerers know of a 'lite' app to use to fix the non working ambient display issues I.E. pick up to wake doesnt work, a recommendation would be soooo welcome. I looked at apps like gravity etc in the play store, but they are a. rather large and b. the permissions they require are a bit suspect. Thanks in advance
Did not know something was wrong.
So I pick it up it does not wake up, I think is a good thing. When I pick it up and I want a display, I press something and have no problem with that.
This maybe one reason the Pixel XL has an excellent battery life.
At the suggestion of another user here, I installed https://play.google.com/store/apps/details?id=com.tomer.alwayson
It's reminiscent of Samsung's version but has a lot more customisability. There's also an option to turn of the display completely when the proximity sensor is activated. All of the permissions make perfect sense fit the features you select and it doesn't cause a terrible battery hit.
raynan said:
At the suggestion of another user here, I installed https://play.google.com/store/apps/details?id=com.tomer.alwayson
It's reminiscent of Samsung's version but has a lot more customisability. There's also an option to turn of the display completely when the proximity sensor is activated. All of the permissions make perfect sense fit the features you select and it doesn't cause a terrible battery hit.
Click to expand...
Click to collapse
Cool app, appears to hit battery fairly hard in my test.
bmtbandit said:
Cool app, appears to hit battery fairly hard in my test.
Click to expand...
Click to collapse
That's why I said it wasn't terrible... Lol. It's definitely not great on your battery, but I can still make it through a day with quite heavy usage.
Ambient display is only meant to flash notifications on the screen in black and white for a short period then turn off. As far as I know, the pick up and bump to wake is an OEM added feature that Motorola, Samsung, and likely others added, but it isn't in stock Android.
Sent from my Pixel XL
imnuts said:
Ambient display is only meant to flash notifications on the screen in black and white for a short period then turn off. As far as I know, the pick up and bump to wake is an OEM added feature that Motorola, Samsung, and likely others added, but it isn't in stock Android.
Sent from my Pixel XL
Click to expand...
Click to collapse
On the Pixel XL it flashes only once which i find to be a disappointment. Also on the Nexus 6 , 6P and 5X the notification/time flashed once upon picking up or moving the phone a bit. This is not enabled on the Pixel models for some reason.
AstroDigital said:
Did not know something was wrong.
So I pick it up it does not wake up, I think is a good thing. When I pick it up and I want a display, I press something and have no problem with that.
This maybe one reason the Pixel XL has an excellent battery life.
Click to expand...
Click to collapse
I'm the same way.
But obviously the OP feels different so why bother to post.
This feature does not even work for me at all (but I am able to get the light to pulse). After talking to pixel support for about 30 minutes they did confirm that Ambient display has an engineering problem they are currently working on.
kmdavisjr said:
This feature does not even work for me at all (but I am able to get the light to pulse). After talking to pixel support for about 30 minutes they did confirm that Ambient display has an engineering problem they are currently working on.
Click to expand...
Click to collapse
Damn !! I was going nuts trying to figure out why this phone was not acting like my Nexus 6. lol I loved the Moto display then had to end up liking the Nexus 6 version afterwards. Then this Pixel XL only flashing the notice once then never again was aggravating. and of course no good app on the play store to emulate this function with 7.1 lol
well I hope this engineering problem can be fixed with software. :silly:
I've created an app that wakes ambient display when you take the phone out of your pocket or if you have the phone face down and turn it over. The app is in addition to Google's ambient display and does not change your lock screen in anyway.
I added a few other paid features for pulsing at an interval, wave to unlock, and battery percentage display on the ambient display.
I would love to have a few beta testers for the extra features, as it's a work in progress. Message me if you'd like a free code to redeem for the paid features.
Check it out: https://play.google.com/store/apps/details?id=com.compass.ambiturner
any way to edit what's on the ambient display?
would love to get a battery% on there.
Agreed. That would be nice.
Sent from my Pixel 2 XL using XDA Labs
I don't understand why Google doesn't put battery percent on the screen I would also like to be able to adjust the size
Have there been any updates on this subject now that we have the working root and TRWP?
Really love to have options to change clock colors and display battery percentage.
mngdew said:
Have there been any updates on this subject now that we have the working root and TRWP?
Really love to have options to change clock colors and display battery percentage.
Click to expand...
Click to collapse
Nope, not yet...
I want to know why the font changes. Sometimes its tall & skinny other times, short & fat.
winstonbyrd said:
I want to know why the font changes. Sometimes its tall & skinny other times, short & fat.
Click to expand...
Click to collapse
In order to prevent burn-in.
mngdew said:
In order to prevent burn-in.
Click to expand...
Click to collapse
Isn't that (also?) why it moves around?
It would be nice if Google could do something simple like say, have an automatic off setting so it's not wasting power during the night.
Must Samsung lead the way with everything Google does? Seriously?
TokyoGuy said:
It would be nice if Google could do something simple like say, have an automatic off setting so it's not wasting power during the night.
Must Samsung lead the way with everything Google does? Seriously?
Click to expand...
Click to collapse
So you'd like to see ambient display start but only run for a set amount of time? I know I've seen it get really dim, dimmer than when it starts
winstonbyrd said:
So you'd like to see ambient display start but only run for a set amount of time? I know I've seen it get really dim, dimmer than when it starts
Click to expand...
Click to collapse
Yes. It's something Samsung has had for ages now. I mean Google took the time to create a scheduled system for blue light reduction, yet couldn't bother to do the same with Ambient Display. It's either on 24-7 or off.
The best solution I've found is to put a piece of paper or such over the top sensor at night so the phone will think the device is in a pocket and turn off the screen.
TokyoGuy said:
paper or such over the top sensor
Click to expand...
Click to collapse
The best ideas are the easiest sometimes. I stay away from Samsung. I can't stand trying to figure out where they put stuff at. Why change menu structure even. I've tried several times because of the awesome hardware but never make it past about 2 months.
byproxy said:
any way to edit what's on the ambient display?
would love to get a battery% on there.
Click to expand...
Click to collapse
Want Ambient Display to show battery level? Star this issue and let Google know (but don't comment)
http://www.androidpolice.com/2017/1...how-battery-level-star-issue-let-google-know/
If you comment you *will* get spammed by Google notifications, just Star, do NOT comment. (don't ask how I know )
Google Issue Tracker
https://issuetracker.google.com/issues/62319884
Pkt_Lnt said:
Want Ambient Display to show battery level? Star this issue and let Google know (but don't comment)
http://www.androidpolice.com/2017/1...how-battery-level-star-issue-let-google-know/
If you comment you *will* get spammed by Google notifications, just Star, do NOT comment. (don't ask how I know )
Google Issue Tracker
https://issuetracker.google.com/issues/62319884
Click to expand...
Click to collapse
Cheers for the tip! :good::good: We've done my part now let's wait
I just got my pixel 2 XL and can't believe google has not enabled this already, it's a very basic item and a must have for many.
Pretty pathetic, hopefully once roms start dropping this will fix many shortcomings on the device.
As mentioned in an different thread, using Accubattery will display the battery level on the AOD. In my brief testing, Google reported the app as not consuming any measurable amount of power overnight, so no appreciable battery draw. Also, there is a root app from an XDA RC that displays the music you are currently playing/streaming on to the AOD. This is different from the existing "now playing" feature already built in, and at the end of the article HERE it says that almost any "text" can be displayed on the AOD. It's not the built in Google controls for the AOD we are expecting, but there is hope for customization for those with root, and in the coming ROMs.
Well, got this notice, just don't know what "Changed" (shrug)
https://issuetracker.google.com/issues/62319884
Changed
_______________________________
Reference Info: 62319884 [Feature request] Show battery level on active/ambient display
component: Android Public Tracker > Android Developer Preview
status: Assigned
reporter: [email protected]
assignee: [email protected]
cc: [email protected], [email protected]
type: Feature Request P4 S4
blocked by: 62436205
hotlist: Dev-Preview-O, Platform
Generated by Google IssueTracker notification system
You're receiving this email because you are subscribed to updates on Google IssueTracker issue 62319884 where you have the role: starred.
Click to expand...
Click to collapse
Pkt_Lnt said:
Well, got this notice, just don't know what "Changed" (shrug)
Click to expand...
Click to collapse
It just means there was another comment left. You will be spammed eternally! :silly:
v12xke said:
As mentioned in an different thread, using Accubattery will display the battery level on the AOD. In my brief testing, Google reported the app as not consuming any measurable amount of power overnight, so no appreciable battery draw. Also, there is a root app from an XDA RC that displays the music you are currently playing/streaming on to the AOD. This is different from the existing "now playing" feature already built in, and at the end of the article HERE it says that almost any "text" can be displayed on the AOD. It's not the built in Google controls for the AOD we are expecting, but there is hope for customization for those with root, and in the coming ROMs.
Click to expand...
Click to collapse
After I read your post I downloaded accubattery and it works quite well. Thanks for the heads up
I hope they enable the ability to keep the icon on the lockscreen while removing it from the notification panel.. that would be perfect.
sent from my Pixel 2 XL or Note FE
I just change my phone from my old one (Xperia C3 Dual) to A2 lite, and the first thing I noticed is that every time I scroll, it fell slower/less responsive; It's like you are scrolling something heavier (that what I fell?). My old phone is really laggy, running android 5.1, but still give me the better feeling when scrolling through setting, fb, web,... Is this how most xiaomi phone is like, or is there something with my unit?
I don't think there's something wrong with your unit. I have the same problem too, especially when typing something (for example in WhatsApp)... If anybody knows a fix, please post it.
After some research, there seem to be a same problem on the mi A1.
(add reddit dot com here)r/Xiaomi/comments/756lh5/facing_motion_blur_issue_on_my_new_mi_a1_texts/
HoangP05 said:
After some research, there seem to be a same problem on the mi A1.
(add reddit dot com here)r/Xiaomi/comments/756lh5/facing_motion_blur_issue_on_my_new_mi_a1_texts/
Click to expand...
Click to collapse
It sends to this topic here in XDA.
It says that it's a screen problem. You could check the LCD model installed in your device entering the test menu *#*#6484#*#* and doing the first test on the list "Version information". Then you could report it here, so we can check if the problem is related to some brand of screens or not.
For my device, that doesn't seem to suffer this problem at the moment, the screen (and other related hardware) is:
Code:
Board ID:
PCBA_V2_GLOBAL
LCD:
oncell,vendor:bird,IC:lol898
TP:
[Vendor]Biel(TP) + EBBG(LCD), [TP-IC]GT917D, [FW]Ver501c,[CFG]Ver0x53
TP surface color:
0x32 Black
BubuXP said:
It sends to this topic here in XDA.
It says that it's a screen problem. You could check the LCD model installed in your device entering the test menu *#*#6484#*#* and doing the first test on the list "Version information". Then you could report it here, so we can check if the problem is related to some brand of screens or not.
For my device, that doesn't seem to suffer this problem at the moment, the screen (and other related hardware) is:
Code:
Board ID:
PCBA_V2_GLOBAL
LCD:
oncell,vendor:bird,IC:lol898
TP:
[Vendor]Biel(TP) + EBBG(LCD), [TP-IC]GT917D, [FW]Ver501c,[CFG]Ver0x53
TP surface color:
0x32 Black
Click to expand...
Click to collapse
Have same LCD as you and do not feel there is a problem with the Input latency. But to be honest sometimes the sensor does not register some touch events. It is really occasionally, for example after unlock the phone with the fingerprint and try to swipe right in the launcher, sometimes I need to touch two times, could be probably the unlock animation still does not finish (but I see the launcher).
Sometimes while typing if I do not press exactly in the center of the letter it does not register my touch input.
Could be probably that I had a Huawei y9 2018 with 18:9 (instead of 19:9) and bigger camera and I used to that and needs more time for the a2 lite.
niko_3100 said:
Have same LCD as you and do not feel there is a problem with the Input latency. But to be honest sometimes the sensor does not register some touch events. It is really occasionally, for example after unlock the phone with the fingerprint and try to swipe right in the launcher, sometimes I need to touch two times, could be probably the unlock animation still does not finish (but I see the launcher).
Sometimes while typing if I do not press exactly in the center of the letter it does not register my touch input.
Could be probably that I had a Huawei y9 2018 with 18:9 (instead of 19:9) and bigger camera and I used to that and needs more time for the a2 lite.
Click to expand...
Click to collapse
No, it's not only you. I have your same problem with the touchscreen, but not always, sometimes it works fine.
BubuXP said:
No, it's not only you. I have your same problem with the touchscreen, but not always, sometimes it works fine.
Click to expand...
Click to collapse
Could be a software issue? I mean not the latency but the not recording touches occasionally.
niko_3100 said:
Could be a software issue? I mean not the latency but the not recording touches occasionally.
Click to expand...
Click to collapse
Yes, I think so, because of it not happening always, and because doing the touchscreen test (from the test menu I posted before) it looks fine.
same problem here i also had this issue on on older redmi note which was fixed by flashing with different firmware.
I can't replicate any of these problems. Maybe I got lucky with the touchscreen model? My version information is the same though..
Happens to me also on home screen with a heavy lwp and typing on messenger. Maybe a cpu or gpu issue? Can't handle the load?
BubuXP said:
It sends to this topic here in XDA.
It says that it's a screen problem. You could check the LCD model installed in your device entering the test menu *#*#6484#*#* and doing the first test on the list "Version information". Then you could report it here, so we can check if the problem is related to some brand of screens or not.
For my device, that doesn't seem to suffer this problem at the moment, the screen (and other related hardware) is:
Code:
Board ID:
PCBA_V2_GLOBAL
LCD:
oncell,vendor:bird,IC:lol898
TP:
[Vendor]Biel(TP) + EBBG(LCD), [TP-IC]GT917D, [FW]Ver501c,[CFG]Ver0x53
TP surface color:
0x32 Black
Click to expand...
Click to collapse
Yay that's the LCD i have
That sounds like a complete dealbreaker...
I was just going to buy the phone tomorrow
I had a similar problem when I had Xposed installed, removed it and now the phone is working great. So if you have Xposed,this is probably your problem.
Can you guys shed some more light on the issue? I am interested how many of you are encountering it and to what level.
No issues here. The phone is smooth, and I neither have Xposed nor Magisk installed.
I have the same problem
Help
i did this , open developer option then tick force gpu rendering and set animation scale to 0.5
it helps to get rid off laggy
anyone using crossbreeder lite (magisk module) on a2lite?
Me too with Mi 6x,
having high latency input and got keyboard typing errors, latency is prominent when scrolling smth even in settings scrolling. I hav compared with redmi note 5 side by side and note 5 did really fast touch TBH...
may b it got fixed by getting miui + touchpanel firmware updates Zzz
This is the Global version that just came out a couple of days ago. Some minor annoyances that was hoping to get some help on:
1. There seems to be no way to display the battery percentage.
Does anyone know of a system app that I need to disable to get this to work? None of the solutions online work with the Red Magic 5G overlay with Android 10, and I don't want to install a third party widget to get this done.
2. As far as I know, I can't customize the lock screen outside of a wallpaper.
Just shows a general date and time but I would like to put widgets or additional information if possible. If anyone has any insight let me know.
I know the phone just came out, but these two issues are EXTREMELY annoying. I honestly might have to flash this when a method becomes available because I'm definitely not liking the lack of customization Nubia has put on with their Android 10 overlay.
May i ask of yours is passing safety net?
1. There seems to be no way to display the battery percentage.
Click to expand...
Click to collapse
Someone on youtube mentioned he reached out to nubia at that is getting fixed with the next update.
2. As far as I know, I can't customize the lock screen outside of a wallpaper.
Click to expand...
Click to collapse
I'm experiencing the same. Just sad about the cool live wallpapers. But you can still select a lockscreen from galery.
May i ask of yours is passing safety net?
Click to expand...
Click to collapse
my RM5G is passing SafetyNet Test
markymark52 said:
This is the Global version that just came out a couple of days ago. Some minor annoyances that was hoping to get some help on:
1. There seems to be no way to display the battery percentage.
Does anyone know of a system app that I need to disable to get this to work? None of the solutions online work with the Red Magic 5G overlay with Android 10, and I don't want to install a third party widget to get this done.
2. As far as I know, I can't customize the lock screen outside of a wallpaper.
Just shows a general date and time but I would like to put widgets or additional information if possible. If anyone has any insight let me know.
I know the phone just came out, but these two issues are EXTREMELY annoying. I honestly might have to flash this when a method becomes available because I'm definitely not liking the lack of customization Nubia has put on with their Android 10 overlay.
Click to expand...
Click to collapse
Regarding #1, you are screwed. I've seen this mentioned a few times on different YouTube reviews. Regarding #2, you are correct. But even more surprising and ridiculous is #3, which I'll add here. It appears Nubia is forcing you to use the stock launcher! Yes, that's right, it's currently IMPOSSIBLE to use ANY launcher other than the one that comes out of the box. Nubia has said that this is INTENTIONAL! CRAZY!
I have battery percentage on mine.
Settings > power management > electricity percentage.
There is no settings > power management
Yeah same don't have those options.
Also can't figure out how to access APN settings
I've read that the only way to see % battery is to activate AOD, and the % will be displayed.
Best regards.
You have the latest firmware. My god the launcher is so buggy and bad. They really should let you use whichever launcher you want. Also no setting to change screen dpi or size and it doesn't even have the android 10 notifications. You can't expand or delete or reply from notification drawer. This is really really poor
What versions does everyone have.
I am NX659J_ENCommon_V4.05
Pulse version of phone.
I have no power management options.
I can reply in line to notification in the notification tray.
How is your Wifi speed? I have tried mine on 2Ghz and 5Ghz and I only get about 30MB down, whereas my Honor View 20 gets 100MB.
Launcher is fine once you have it all setup, but kept saying shortcut already exists. If you rebooted you see they are there.
Now I have it all as want it, thats not really an issue now, but not a great setup experience.
RussST24 said:
What versions does everyone have.
I am NX659J_ENCommon_V4.05
Pulse version of phone.
I have no power management options.
I can reply in line to notification in the notification tray.
How is your Wifi speed? I have tried mine on 2Ghz and 5Ghz and I only get about 30MB down, whereas my Honor View 20 gets 100MB.
Launcher is fine once you have it all setup, but kept saying shortcut already exists. If you rebooted you see they are there.
Now I have it all as want it, thats not really an issue now, but not a great setup experience.
Click to expand...
Click to collapse
4.05? I'm on 3.08
joemossjr said:
4.05? I'm on 3.08
Click to expand...
Click to collapse
Hmm that's interesting.
Here is my screenshot.
UK delivery yesterday.
Was up to date when I got it.
Sent from my NX659J using Tapatalk
That's so weird no updates available for mine also
Battery Meter Overlay was the only app that I found to be able to show the battery % (choose the "Overlap the Statusbar" option). You have to buy the paid version if you want to hide it in full screen mode. It is not perfect, but it is better than nothing. You can choose from different kind of themes and change the colours, scale and position so it is pretty customizable
I already new about Nubia blocking the use of custom launchers (saw a review where it was mentioned) before buying the phone and wrote them about it and asked them to revert this bad decision (and I also told them to fix the missing battery %). I hope you all write them about it as well, so they know that they have to fix these issues. And if they don't allow the use of custom launchers they have to give us a better stock launcher with much better customizability.
Do different models have different firmware?
Have they ever pushed an update in previous versions?
Anyone getting poor WiFi speeds?
Mine is just about 30mb down on 5ghz WiFi when my other phone pushes 100mb.
Tried 2ghz even worse.
Thanks
Sent from my NX659J using Tapatalk
RussST24 said:
Anyone getting poor WiFi speeds?
Mine is just about 30mb down on 5ghz WiFi when my other phone pushes 100mb.
Tried 2ghz even worse.
Thanks
Click to expand...
Click to collapse
My wifi has been pretty good.
Hi, anyone have any idea when will the global rom be released? Waiting to flash on my CN set..
Just noticed. All incoming calls are showing as "unknown" doesn't even show the caller number.
On O2 in the UK.
Anyone seeing this?
Thanks
Russ
Sent from my NX659J using Tapatalk