Develop Bugs

Well my two dollar car charger came today

As stated in the title. Here are some pics
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I'd bet the Captivate will only see it as USB port and never draw more than 500mA from it. You can check which mode your phone is charging in the settings.

foxbat121 said:
I'd bet the Captivate will only see it as USB port and never draw more than 500mA from it. You can check which mode your phone is charging in the settings.
Click to expand...
Click to collapse
Care to elaborate on where to find it as I dont see it.

rahlquist said:
Care to elaborate on where to find it as I dont see it.
Click to expand...
Click to collapse
Settings->About Phone->Battery status (first one on the list... when plugged in to the AC adapter that came with the phone it will say Charing (AC) under it)

I got a $3 AC car charger ("For blackberry" but thy're both just microusb) off dealextreme. The connector is a little tight but it works great and charges fast

I've found that my Zune HD FM Transmitter charges well too. Has a USB port on it. Not a cheap alternative, but it's multi-functional and it works. Think the Captivate recognizes anything to charge as long as it gives power...

I'm sure it will charge, but at only 500mA, will be pretty slow (especially if you're using while charging).

I use an old crackberry charger (has usb port on it). 500mA output. Charges phone fine. Just not as fast as the samsung 700ma charger.
Sent from my SAMSUNG-SGH-I897 using XDA App

I wonder if the iPhone charger would work for it? Anyone tried one?

smeltn said:
I wonder if the iPhone charger would work for it? Anyone tried one?
Click to expand...
Click to collapse
I haven't tried the car charger, but the AC outlet->USB works great

I purchased the $1.16 car charger from Monoprice.com, and it works great. Unfortunately, board rules don't allow me to post a link. Just search for "car charger" on Monoprice, and it's the first one that comes up. Or, search for the product ID: 3523.
The only problem is that, while the label lists a maximum output of 1A, the Captivate only draws 500 mA from it (USB mode), as is the case with the other chargers listed in this thread. I have not found the lower charging current to be a problem.
For $1.16... It's a steal.
I also purchased two micro USB cables from the same site, the ones with ferrites, but I had to mod the plastic heads with a Dremel to get them to fit the angled port opening. They fit and work perfectly now, though.

Even with the stock 700ma wall charger, it takes almost 4 hours to completely charge the battery. A 500ma charger (most iPhone ones and generic USB ones) will take even longer. This of course assumes you're not using the phone for anything. If you're using the phone for navigation, for example, your 500ma charger will not have enough juice for the phone and the battery level will continue to drop. So, it is important to have the car charger that can supply more than 500ma to the phone.
Currently, I know the Zune HD premium car charger can be recognizd as AC charger and seems supply more than 700ma of juice. And I read some Moto mini-USB car charger (no USB port on the charger) can be used as rapid charger as well.
I've tried two different cheap USB port car charger, one labeled 2.1a and the other is 700ma. Both are designed for iPhone/iPod and hence can only be recognized as USB charger.
If anyone found any small USB port car charger that can be recognized by the phone as AC charger, please post here.

I've heard good things about the Scosche Revive charger. I saw it in a car charger thread on the Android Forums. A guy bought it for his Evo and said it charged nicely with everything running (GPS, 4G, Navigation, et cetera). Here's a link to his post reviewing it. There's also the Revive II which has a 2.1A port and a 1A port.

Sleeping Giant said:
I've heard good things about the Scosche Revive charger. I saw it in a car charger thread on the Android Forums. A guy bought it for his Evo and said it charged nicely with everything running (GPS, 4G, Navigation, et cetera). Here's a link to his post reviewing it. There's also the Revive II which has a 2.1A port and a 1A port.
Click to expand...
Click to collapse
Thanks for the link. The big question is: Can Captivate regconize it as rapid charger instead of USB? Just because it works with Evo (HTC phone) doesn't mean it will work the same for Captivate. And I suspect the Revive II won't work well for Captivate at all because it is designed for iPhone/iPad.

foxbat121 said:
Thanks for the link. The big question is: Can Captivate regconize it as rapid charger instead of USB? Just because it works with Evo (HTC phone) doesn't mean it will work the same for Captivate. And I suspect the Revive II won't work well for Captivate at all because it is designed for iPhone/iPad.
Click to expand...
Click to collapse
I can't say how it'll work with the Captivate, but they were having the same problem with their phones (700mA chargers only outputting 500mA). So, I'd have to say there is a good chance it would work. I'd test it out myself, but I really don't need a car charger. My work commute is 10 minutes round trip, school is 20 minutes.

Anyone come across a good combination charger/mp3 adapter?
Oh and this got good reviews on Amazon: (eeeek can't post links yet)
amazon.com/gp/product/B002VZSQ08/ref=oss_product

USB car charger from Walmart

Can the GT 10.1 plug into any USB car charger?
I was looking at this from Walmart's website
If so, it'll be a lot cheaper than the car charger Samsung is selling
http://www.walmart.com/ip/Scosche-Dual-USB-Car-Charger/5691047
Sent from my GT-P7510 using Tapatalk

I've noticed that plugging into various USB wall chargers won't work. The only one that will work is the one that came with the tab. I am pretty sure this is because the Samsung one is a 2amp charger and all of my others are less than 1amp, 850mah specifically. If you can find a 2amp car charger then it should work fine. Otherwise, the charging indicator will show that it's connected to a charger but will have a red x on in it meaning that it's not charging or can't charge. I suppose anything too low can't charge the battery fast enough to make up for the battery drain

i bought a $10 2 port charger from amazon for the ipad/galaxy tab 7". it works fine for both tablets and the gt10.1.

madsquabbles said:
i bought a $10 2 port charger from amazon for the ipad/galaxy tab 7". it works fine for both tablets and the gt10.1.
Click to expand...
Click to collapse
Do you have the link?

Make sure it has a 5v 2a output.
Sent from my GT-P7510 using XDA Premium App

X10D3 said:
Make sure it has a 5v 2a output.
Sent from my GT-P7510 using XDA Premium App
Click to expand...
Click to collapse
Ok. Thanks.
Sent from my GT-P7510 using Tapatalk

oh......i see.
X10D3 said:
Make sure it has a 5v 2a output.
Sent from my GT-P7510 using XDA Premium App
Click to expand...
Click to collapse
Sent from my SHW-M110S using XDA App

I bought this one from deal extreme. Its less than $3.95 with free shipping. Comes with 2 usb ports. I have been charging my iPad and Dell Streak tablet without any problem. Yes it does charge 2 devices at same time. Its also small, doesn't get hot, doesn't make any noise and looks good. Highly recommended.
http://goo.gl/u00Gz

media_11 said:
I bought this one from deal extreme. Its less than $3.95 with free shipping. Comes with 2 usb ports. I have been charging my iPad and Dell Streak tablet without any problem. Yes it does charge 2 devices at same time. Its also small, doesn't get hot, doesn't make any noise and looks good. Highly recommended.
http://goo.gl/u00Gz
Click to expand...
Click to collapse
I will definitely look into that particular model.
Sent from my GT-P7510 using Tapatalk

figurine said:
I've noticed that plugging into various USB wall chargers won't work. The only one that will work is the one that came with the tab. I am pretty sure this is because the Samsung one is a 2amp charger and all of my others are less than 1amp, 850mah specifically. If you can find a 2amp car charger then it should work fine. Otherwise, the charging indicator will show that it's connected to a charger but will have a red x on in it meaning that it's not charging or can't charge. I suppose anything too low can't charge the battery fast enough to make up for the battery drain
Click to expand...
Click to collapse
it's. still charging. you can get a trickle charge even from standard USB. s3ms that this is one of the only tegra2 tablets that can.
I heard that the trnaformer can but mine doesn't. it should work if I had USB.3.0.

madsquabbles said:
it's. still charging. you can get a trickle charge even from standard USB. s3ms that this is one of the only tegra2 tablets that can.
I heard that the trnaformer can but mine doesn't. it should work if I had USB.3.0.
Click to expand...
Click to collapse
So if l'm using it to watch videos and music while on wifi, do you think that it'll maintain its charge while trickle charging?

I bought a couple of these adapters;
http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=330565218553&ssPageName=ADME:X:RTQ:AU:1123
Now I can charge my Galaxy Tab 10.1v off ANY USB port - very very handy. Works just very well from a PC USB port too.

figurine said:
So if l'm using it to watch videos and music while on wifi, do you think that it'll maintain its charge while trickle charging?
Click to expand...
Click to collapse
i don't think the amount coming in will equal the amount discharged. depends on the brightness of the screen and how much cpu you're using. mine was charging veeeerrry slowly while reading the steps to root and the screen on, other than that it was idle and still slowly charged.

media_11 said:
I bought this one from deal extreme. Its less than $3.95 with free shipping. Comes with 2 usb ports. I have been charging my iPad and Dell Streak tablet without any problem. Yes it does charge 2 devices at same time. Its also small, doesn't get hot, doesn't make any noise and looks good. Highly recommended.
http://goo.gl/u00Gz
Click to expand...
Click to collapse
I also bought this. Arrived in 3 weeks from China, but free shipping, or $0.01.
They seem very good. There is some hard to read text (even in English) on the plastic part that tells you the top port is for iPad (2.1A) and the bottom is for others (1A). I've put a photo below of the guts. Seems it's definitely more than just some cheap resistors and a fuse.
I tried it in my vehicle and you still get the red X with a OEM cable with the device powered on, but NOT if you use an adapter plug found on eBay.
Do yourself a favor and order 3-4 of each. =)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

figurine said:
I've noticed that plugging into various USB wall chargers won't work. The only one that will work is the one that came with the tab. I am pretty sure this is because the Samsung one is a 2amp charger and all of my others are less than 1amp, 850mah specifically. If you can find a 2amp car charger then it should work fine. Otherwise, the charging indicator will show that it's connected to a charger but will have a red x on in it meaning that it's not charging or can't charge. I suppose anything too low can't charge the battery fast enough to make up for the battery drain
Click to expand...
Click to collapse
Nope - you need a 2A charger, but any old 2A charger won't do. Most are designed for the iPad, which uses resistive voltage dividers in the charger to signal the presence of a dumb charger. Specifically the iPad looks for 2.0 volts on one of the data pins and 2.8 on the other.
The Tab expects D+ and D- to be shorted together and somewhere around 1.2-1.24 volts.
It IS possible to make iPad chargers (confirmed on Scosche reVIVE II) work as follows:
Bridge D+ and D- with a solder blob.
Remove the resistor that was the upper part of the 2.8v voltage divider (i.e. between the data pin and +5v).
At this point the charger should output around 1.2 volts on D+ and D-.

this is the best way to get you phone charged fast

i recently discovered that many different chargers charge at different speed not correlating to their labeled amperage,
i build a testing rig that contains a resistor at 0.1A and measured its voltage in order to give me an accurate result of the current of each setup.
i believe this will help you all buy the right charger
this is a picture of my testing rig:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i tested an S2 and an S3,
i used:
original note charger (and its cable)
original S3 charger (fixed cable)
cheap htc charger off eBay
and a combo charger designed to charge a phone and a battery at the same this.
here are the results:

thanks
cool info!

thanx for this info!!!
never thought, the cable could make any difference!
I recently realized. that an org. sam charger from amazon doesn´t power my phone up properly..... the charging process takes from 20% to 100% nearly 10 hours....
the chrager looks original but the cable doesn´t..... so i will give it a try with on org. cable

What do the values on the right of the chart represent? The charge rate of the charger?
------------------------------------
If it was easy you'd of hired the guy at Home Depot to to it.

Siyah Kernel
:good: When u r on Siyah Kernel u can reduce the changing time; it is a great and easy way too.....

gilbequick said:
What do the values on the right of the chart represent? The charge rate of the charger?
------------------------------------
If it was easy you'd of hired the guy at Home Depot to to it.
Click to expand...
Click to collapse
the values on the right are current(I) measured at miliamps (mA)
bapsack said:
thanx for this info!!!
never thought, the cable could make any difference!
I recently realized. that an org. sam charger from amazon doesn´t power my phone up properly..... the charging process takes from 20% to 100% nearly 10 hours....
the chrager looks original but the cable doesn´t..... so i will give it a try with on org. cable
Click to expand...
Click to collapse
the original charger does not have a removable cable!
its a fixed cable
Addymore said:
:good: When u r on Siyah Kernel u can reduce the changing time; it is a great and easy way too.....
Click to expand...
Click to collapse
this was done on a stock rom (4.1.2)

the original charge comes with a removable cable.
Sent from my GT-I9300 using xda app-developers app

mputtr said:
the original charge comes with a removable cable.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
x2, my original charger for my S3 had a removable micro-usb cable.
It charges from ~20% to 100% in about 2hrs

mputtr said:
the original charge comes with a removable cable.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
+1
Sent from my GT-I9300 using xda premium

well i can only speak for my german s3....
and this had a removable cable!
on my old i9000 it s fixed!
cheers

Whoa !
Great info mate - i like such stuff more than Roms and kernel

Very cool!!!

maybe its a regional thing,
i can see that usually the original S3 does have a removable cable

The USB spec states 500ma is the max you can push over the USB interface (I think USB 3 is higher though). Most electronics will tend to honor this 500ma limit. I'm not sure if it's just common practice or an actual standard, but shorting the 2 data pins together ignifies that you are connected to an AC charger that can supply a higher amperage. By default our phones & the original SGS phones will charge at 500ma max. However if you plug in a charger with the 2 data pins shorted (our OEM chargers are like this), or short them together yourself along with a capable charger, your phone will charge at 700 or 750ma (forget which offhand).
Some more info about hacking the charger config & dock mode stuff at http://forum.xda-developers.com/showthread.php?p=28342378.
Sent from my Transformer using Tapatalk 2

resistor value
Do you mean a resistor with 0.1ohms not 0.1A? What resistance did you use for this setup? Very interesting and helpful information! Although, I'm very curious why a different cable would give you different power numbers. Does the charger measure resistance on the cable and then lower the maximum charge current as a result? I can't really see any other way the charger could tell which cable you are using unless the charger adds some capacitance between wires or some other discrete component.

I use the charger supplied with the Amazon Kindle Fire. That charger charges my phone really fast. I think a little faster than the stock Samsung one

Very cool. Anyway you could get your hands on an Nexus charger?

Wouldnt it be better to slow charge it like a car battery? If you trickle charge a car the battery lasts way longer than on a high amp charge. This seems to work on my extended battery I ditched the 1amp for a 700MAh and charge lasted 4 days with almost 7 hours screen time
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

yup. a slower charge is better for your battery than a fast charge. (based on what i've been reading on with battery tech)

mputtr said:
yup. a slower charge is better for your battery than a fast charge. (based on what i've been reading on with battery tech)
Click to expand...
Click to collapse
thats what ive always been told. also heard the battery life span decreases with fast charges.

Car Charger

Hi guys, anyone could recommend a good car charger for this HTC One. I am running an app called Autoguard which records my trip. I manually activate car mode and this app but I realised my current car charger is not able to charge the phone quick enough despite a 2A rating with BT and this app running. It drains about 10% on a half hour journey! I have also did a little mod on my USB cable to short pin 2 & 3 but don't seems to work. I also read about charging modes (AC or USB) which the latter charged slowing whereas AC gives the full charging potential. I confirmed my current charger charged in USB mode. Any thoughts?

Seems like nobody has this problem!

I personally use the Motorola Rapid rate charger from Amazon.com
http://www.amazon.com/gp/aw/d/B000S5Q9CA/ref=mp_s_a_1?qid=1367933488&sr=8-2&pi=SL75
It works for me and does a great job.. I've had it for quite some time. My Galaxy Nexus on Verizon while using LTE was using more output than input while I was charging with a no name charger before so I decided to give this a shot and it worked. It charged and the percentage went up instead of trickling slowly with the no name charger..
I used it now with my H1 and it charges pretty quickly
Sent personally from the HTC one & only

Thanks HYE_Tech, this is useful information!

I just use a two port 2.1 volt dual usb charger and just plug a regular micro usb cable there
Sent from my HTC One using Tapatalk 2

I find the HTC branded car charger works well
http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=246652&phone=246667
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my HTC One using xda app-developers app

But what would make the difference between charging the One ore not while navigating?
I have a mini charger with an output of 1A, but still the phone in draining while navigating. Could this be the same issue as with the Galaxy S2, that it depends on the usb pin layout whether the phone charges with 500mA or 1A? And if so, isn't there a usb cable which already has the correct pin layout to charge to phone with 1A?

Bart1981 said:
But what would make the difference between charging the One ore not while navigating?
I have a mini charger with an output of 1A, but still the phone in draining while navigating. Could this be the same issue as with the Galaxy S2, that it depends on the usb pin layout whether the phone charges with 500mA or 1A? And if so, isn't there a usb cable which already has the correct pin layout to charge to phone with 1A?
Click to expand...
Click to collapse
The One doesn't seem to change charging rates based on the USB pin layout-- I have several chargers and cables with shorted data cables and none of them seem to charge the device at higher than 500ma. It's definitely the phone itself that's not drawing more. I think that, either via software or hardware, the phone is checking the wattage available and if it is below 5Vdc/2A, it only draws 500ma. I just ordered a DC adapter that claims to be rated at 5Vdc/2A, and it should be delivered tomorrow.

Well in my car the charger is a 2.1A charger so that should not be the problem.
Not shure what the voltage output is.
I shortened the middle pins, but indeed, without succes.
Where did you order your charger? Can you let me know if it's working? If the phone sees it as a AC charger?
edit:
I have this one: http://www.bol.com/nl/p/hama-ipad-p...8284/?Referrer=ADVNLBES0020159005000010898284 (sorry it's in dutch). So it should be a 5V charger but still no effect...

Bart1981 said:
Well in my car the charger is a 2.1A charger so that should not be the problem.
Not shure what the voltage output is.
I shortened the middle pins, but indeed, without succes.
Where did you order your charger? Can you let me know if it's working? If the phone sees it as a AC charger?
edit:
I have this one: http://www.bol.com/nl/p/hama-ipad-p...8284/?Referrer=ADVNLBES0020159005000010898284 (sorry it's in dutch). So it should be a 5V charger but still no effect...
Click to expand...
Click to collapse
This is the one I ordered:
Kinivo CX420 Two Port USB Car charger - for all smartphones and tablets (4.2 Amp / 20W)
http://www.amazon.com/dp/B009TBF7IG/ref=cm_sw_r_an_am_ap_am_us?ie=UTF8
If this one doesn't work, I'm just going to permanently mount a 150W inverter and start using AC adapters. All of the 2.1a adapters show as charging via AC, but it still tops out at 500ma.
edit: i've been posting all over these forums with the same stuff... here's a link to whatever thread I just responded to with the most current information: http://forum.xda-developers.com/showpost.php?p=41797839&postcount=6

I doubt if that will work. The output of the AC charger is only 1A and 5V, so there is something else why the phone thinks it's on an AC or USB charger. Still haven't found out what though
I just took apart an AC charger, and guess what, the two middle pins are shortened:
So what else tells the phone it's on an AC charger or USB charger???

Bart1981 said:
I doubt if that will work. The output of the AC charger is only 1A and 5V, so there is something else why the phone thinks it's on an AC or USB charger. Still haven't found out what though
I just took apart an AC charger, and guess what, the two middle pins are shortened:
So what else tells the phone it's on an AC charger or USB charger???
Click to expand...
Click to collapse
I really think it's just down to output wattage, and nothing more. I have plenty of chargers with the middle pins shorted, and even though the phone says it's charging on AC, it only draws 500ma. That charger I linked my last post has been actually charging my phone while it's in use, pretty nearly 100% of the time. It does dip from time to time, but I've noticed that the AC adapter does too.

Sorry to bring back an old thread, but I've seen some conflicting posts. Should I be getting a 2a car charger? I'm not sure what my current one is rated at as I haven't checked, but today in car mode and with bluetooth connected it was draining instead of charging and I'd like to fix that. I need a 2 usb port charger and I know most of those are not actually 2a per port, any suggestions? Is 2a what I need?
Thanks,
Tim

Unless you're using custom kernels, I believe the htc one is limited to 1a charging
Sent from my HTCONE using Tapatalk 4 Beta

HYE_TECH said:
I personally use the Motorola Rapid rate charger from Amazon.com
http://www.amazon.com/gp/aw/d/B000S5Q9CA/ref=mp_s_a_1?qid=1367933488&sr=8-2&pi=SL75
It works for me and does a great job.. I've had it for quite some time. My Galaxy Nexus on Verizon while using LTE was using more output than input while I was charging with a no name charger before so I decided to give this a shot and it worked. It charged and the percentage went up instead of trickling slowly with the no name charger..
I used it now with my H1 and it charges pretty quickly
Sent personally from the HTC one & only
Click to expand...
Click to collapse
I've used this exact same charger for some time now w/o issue on several phone types. I bought it based off it's many positive reviews and it has lived up to it's reputation.

I got my HTC One car kit,by HTC,its just perfect ,its made just like htc one- awesome build quality .Brings on car mode automatically just by sliding in the One.:good:

Dual 2.1A (4.2A total) Wall Charger (US)?

Does anyone know of a good dual 2.1A (4.2A) wall charger? I've found reviews for car charger but I want one for the wall to charge both my Nexus 5 and my Nexus 7 FHD when I travel. Thanks!

bleuiko said:
Does anyone know of a good dual 2.1A (4.2A) wall charger? I've found reviews for car charger but I want one for the wall to charge both my Nexus 5 and my Nexus 7 FHD when I travel. Thanks!
Click to expand...
Click to collapse
This is the one I bought a few months ago, no problems ... yet

This is the one that I have been using for over a year around the world (I travel frequently for work), and have never had an issue.
Can actually support 4 simultaneous devices, and I've tested it at one point with a Galaxy S4, iPhone 5, Galaxy Note 10.1, and iPad all plugged in at once and charged all of them at the same time.
It's got dedicated ports for a ipad, samsung tablet (presumably a little more juice on these two ports), and two "universal" ports that work for most phones (I current use it with my Galaxy Tab2 and Nexus 5) so you should have no issues with both Nexuses.
Also, the size isn't too bad at all, so very portable. The only complaint -- if you can call it that -- is that the blue led is super bright. Nothing that can't be fixed with a piece of black electrical tape
http://www.amazon.com/Premium-Charg...id=1391552707&sr=8-1&keywords=bolse+quad+port

3rdstring said:
This is the one I bought a few months ago, no problems ... yet
Click to expand...
Click to collapse
pinoymutt said:
This is the one that I have been using for over a year around the world (I travel frequently for work), and have never had an issue.
Can actually support 4 simultaneous devices, and I've tested it at one point with a Galaxy S4, iPhone 5, Galaxy Note 10.1, and iPad all plugged in at once and charged all of them at the same time.
It's got dedicated ports for a ipad, samsung tablet (presumably a little more juice on these two ports), and two "universal" ports that work for most phones (I current use it with my Galaxy Tab2 and Nexus 5) so you should have no issues with both Nexuses.
Also, the size isn't too bad at all, so very portable. The only complaint -- if you can call it that -- is that the blue led is super bright. Nothing that can't be fixed with a piece of black electrical tape
http://www.amazon.com/Premium-Charg...id=1391552707&sr=8-1&keywords=bolse+quad+port
Click to expand...
Click to collapse
Thanks for the suggestions!

I tried charging my N5 with my LG G Pad charger and the phone got really warm. Is this OK? That was at 1.7A...

I got the Limefuel dual port 4.8A/24W dual port charger and it's hooked up to two Qi chargers to charge 2 Nexus 5's and I can say these Qi chargers have never charged this quickly before. One Qi charger is the 3-coil type (which is already awesome) and even charging while using the phone it charges mad fast.
I also got the Anker 5-port 8A/40W charger which I am still testing.
Sent from my Nexus 5 using Tapatalk

kwurky said:
I got the Limefuel dual port 4.8A/24W dual port charger and it's hooked up to two Qi chargers to charge 2 Nexus 5's and I can say these Qi chargers have never charged this quickly before. One Qi charger is the 3-coil type (which is already awesome) and even charging while using the phone it charges mad fast.
I also got the Anker 5-port 8A/40W charger which I am still testing.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
This the one? http://www.amazon.com/Wall-Charger-Limefuel-L48WC-Blackberry/dp/B00FW1GE9S

bleuiko said:
This the one? http://www.amazon.com/Wall-Charger-Limefuel-L48WC-Blackberry/dp/B00FW1GE9S
Click to expand...
Click to collapse
I second that recommendation. I have 2 Limefuel L48WC chargers. Both ports output full amperage to my Nexus family of devices. The flip prongs help with travel. As with many chargers, it has a light, but could easily be muted by a strip of tape.
Sent from my Nexus 5 using Tapatalk

I bought this one from a local store for $12 + tax, works great. The only thing it doesn't charge are some of the newer BB's but it has no problem with charging an ipad, n7, and n4 at the same time
http://www.amazon.com/Antec-Quad-Ch...keywords=antec+quad+port+usb+charging+station

bleuiko said:
This the one? http://www.amazon.com/Wall-Charger-Limefuel-L48WC-Blackberry/dp/B00FW1GE9S
Click to expand...
Click to collapse
Yes that's the one
Sent from my Nexus 5 using Tapatalk

I got this one a couple of months ago:
http://www.amazon.com/gp/product/B00ATZJ5YS/ref=oh_details_o02_s00_i00?ie=UTF8&psc=1
Sure it's a little bulky, but it'll also give space for regular plugs, charges my and my wife's phones quickly, no problems.

If anyones looking for a nice-looking "short" dual 2.1A usb car charger, this one is really nice.
http://www.amazon.com/Scosche-USBC2...391805856&sr=1-9&keywords=4.2+amp+usb+charger
It's expensive on Amazon, so just ebay "SCOSCHE BLACK USB Car Charger" and you can find it for $10. works great.

Bolse® 4.2Amp 20W High Output Turbo Charge Dual USB Port Wall Charger
Similar to the LimeFuel charger mentioned in other posts, I got this one. Works well.
And YES it does work for Androids -- read the user reviews.
Bolse® 4.2Amp 20W High Output Turbo Charge Dual USB Port Wall Charger
http://www.amazon.com/gp/product/B00DRLA5OU/ref=oh_details_o08_s00_i00?ie=UTF8&psc=1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Specifications:
Input Voltage: 10-24V DC
USB Output 1: 5V, 2.1A(Max)
USB Output 2: 5V, 2.1A(Max)
Total Output: 5V, 4.2A (Max)

I got this bad boy for 20 bucks..
http://www.amazon.com/Family-Sized-...UTF8&qid=1392042488&sr=1-1&keywords=anker+25w