Develop Bugs

CM10.1 Stable Is Out

Has anyone tried it. What's it like?

coltonbauman said:
Has anyone tried it. What's it like?
Click to expand...
Click to collapse
I'm on it, no problems at all. I use Uber Kernel w/ it too.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

U know Tha main question that's going to be asked does Google hang outs work
sent from my carbonized GSII

Haven't touched CM10.1 nightly ROMs for a while. But the LED Notification stopped working, stayed on an older version of CM10.1 nightly.
Gonna try that when I get home. Also PA made it to this device. Also the Jedi mind trick Roms. So many options. Wow head's spinning.
Leaning towards CM10.1 though.

No signal, can't play video
I was using CM10.0. Updated CM10.1 with corresponding gapp.
-Can't register on cellular network anymore. Can't set AWS frequency in the factory testing mode.
-All of my Video apps start legging, play videos for a little while and quit after about a minute, say video format not supported. Even though the video is mp4 format and it was playing it before quitting.
How should fix it? Flash kernel? Which kernel should I use?

zhchaoxing said:
I was using CM10.0. Updated CM10.1 with corresponding gapp.
-Can't register on cellular network anymore. Can't set AWS frequency in the factory testing mode.
-All of my Video apps start legging, play videos for a little while and quit after about a minute, say video format not supported. Even though the video is mp4 format and it was playing it before quitting.
How should fix it? Flash kernel? Which kernel should I use?
Click to expand...
Click to collapse
Uber :thumbup::beer:
sent from my carbonized GSII

Had some problem with radio but I just had to update to the latest version and everything else looks fine

I tried to resist flashing this ROM but had to give in to temptation. Said to myself no more flashing when I got into boot issues with JMTJB6. Odin flashed stock and left it unrooted! Was happy...but then temptation. Happy I did it, rock solid, butter smooth, doesn't seem to have any lag.

vmartinez39 said:
Haven't touched CM10.1 nightly ROMs for a while. But the LED Notification stopped working, stayed on an older version of CM10.1 nightly.
Gonna try that when I get home. Also PA made it to this device. Also the Jedi mind trick Roms. So many options. Wow head's spinning.
Leaning towards CM10.1 though.
Click to expand...
Click to collapse
Works for me. Use Uber Kernel too.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

hatememarkz said:
U know Tha main question that's going to be asked does Google hang outs work
sent from my carbonized GSII
Click to expand...
Click to collapse
Works!
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

nivekx9 said:
Works for me. Use Uber Kernel too.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Thanks that did the trick. I was going mad at why the LED notifications stopped working.
Also still on the non-touch recovery, 5.0.26 the one that needs the Darkmod scripts to wipe cache and do full installs.
Also had to turn sensor on/off before it actually worked. Read that from another post from someone that helped me.
Thanks again dude.

vmartinez39 said:
Thanks that did the trick. I was going mad at why the LED notifications stopped working.
Also still on the non-touch recovery, 5.0.26 the one that needs the Darkmod scripts to wipe cache and do full installs.
Also had to turn sensor on/off before it actually worked. Read that from another post from someone that helped me.
Thanks again dude.
Click to expand...
Click to collapse
Sure, no problem , and consider upgrading to 6.x.x recoveries, no scripts needed!

nivekx9 said:
Works!
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
My contact still cannot hear me. Any fix for this... Skype not an option as my family doesn't use it.
Sent from my ASUS Transformer Pad TF300T using Tapatalk 4 Beta

cstrips said:
I tried to resist flashing this ROM but had to give in to temptation. Said to myself no more flashing when I got into boot issues with JMTJB6. Odin flashed stock and left it unrooted! Was happy...but then temptation. Happy I did it, rock solid, butter smooth, doesn't seem to have any lag.
Click to expand...
Click to collapse
I just had two random reboots, it might be related to bluetooth.
Scenario 1: Answered a phone call via steering wheel controls in the car. Phone reboots
Scenario 2: While connected left the car car. Phone reboots.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

Flash video was not smooth for me. Even with latest Adobe update. But no MHL to TV support was the deal killer. Other than that it was fine.

rudytheinvisible said:
Flash video was not smooth for me. Even with latest Adobe update. But no MHL to TV support was the deal killer. Other than that it was fine.
Click to expand...
Click to collapse
sorry man.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

cstrips said:
I just had two random reboots, it might be related to bluetooth.
Scenario 1: Answered a phone call via steering wheel controls in the car. Phone reboots
Scenario 2: While connected left the car car. Phone reboots.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Are you using a custom kernel? And did you wait the 10 minutes after the flash?
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

No custom kernel. Flashed it days ago...reboot occurred today...Yes I did wait the 10 minutes after initial flash.
Is this a known problem? Would a custom kernel like uber kernel be more stable? I really like this ROM so far as is.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

cstrips said:
No custom kernel. Flashed it days ago...reboot occurred today...Yes I did wait the 10 minutes after initial flash.
Is this a known problem? Would a custom kernel like uber kernel be more stable? I really like this ROM so far as is.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
I'm using Uber and I haven't had a RR yet.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

CM10.2 Nightlies Discussion

In the heritage of CyanogenMod discussion threads, here is a new one for the release of the 10.2 nightlies. Nightlies started on 8/26/13 (my b-day thanks aremcee). 10.2 will bring you up to Android 4.3 Jellybean.
If you are on 10 or 10.1, go to Settings > About phone > CyanogenMod updates, and change your update type to Nightly. Download, install, enjoy.
If you use Google Apps you must flash newer gapps. After CM update download the latest gapps here: http://goo.im/gapps. Currently the 10.2/4.3 package is 20130813. Reboot into recovery and flash the gapps zip.
Not on CyanogenMod? I recommend wiping everything and installing:
Download CM: http://get.cm/?device=p930
Download Google Apps: http://goo.im/gapps
Change Log: http://10.2.cmxlog.com/?device=p930

I updated to 10.2 yesterday. Seems to be really smooth and generous on the battery. Obviously this is not a formal test. I'm not on WIND kernel anymore so I don't think my idle battery use is nearly as good. I hope he releases a 10.2 version soon.

Those of you having issues with no mobile signal from 8/27 on flash the baseband/firmware from here:
http://forum.xda-developers.com/showthread.php?t=1842763
That will fix it.
Sent from my LG-P930 using xda app-developers app

trying 8/30 nightly apn's are working. Looks pretty good so far, will have to leave it on the phone for a day and see how things progress.

Is there a way to partially flash Gapps or is best to put them all on regardless of whether I use them?

Just flashed this . only thing is I notice while opening an app or going from an app to home screen . I get lg logo appear then disappear . and in about phone last box lisnux I think it was I kept tapping it and my phone froze lol. Other than that I love it can't wait for wind kernel
Sent from my LG-P930 using xda app-developers app

ShadowOf said:
Is there a way to partially flash Gapps or is best to put them all on regardless of whether I use them?
Click to expand...
Click to collapse
You can open the zip with 7zip and remove the applications you don't want, then flash gapps zip.

nizmoboy98 said:
Just flashed this . only thing is I notice while opening an app or going from an app to home screen . I get lg logo appear then disappear
Click to expand...
Click to collapse
I've noticed the same thing.

Can anyone verify that their GPS is working properly?

Have a question can u send videos in mms
Sent from my LG-P930 using xda premium

I used GPS yesterday for work . used for about 2hrs no problems
Sent from my LG-P930 using xda app-developers app

Namuna said:
Can anyone verify that their GPS is working properly?
Click to expand...
Click to collapse
I am having horrible issues with Google maps and cm10.2. After install and I run for the first time every thing works (as long as I am on WiFi). As soon as I go to run it the second time and go to navigation I have the following issues:
1. The recent location, home & work, & history/starred cards will flash for a second then disappear.
2. When I have the above state it takes 5 - 10 min to achieve GPS lock, then I loose it about every 5 min.
3. The green ribbon at the top no longer has the street name, just an arrow and the number of mile on the left and the letter mi on the right. Correct orientation should have the arrow, miles & mi on the left with the current road on the right, and then when you approach the turn the banner should get larger with the street larger in the middle of the banner.
4. If I uninstall and reinstall, I can get it to work the first time and as soon as I exit and go back into the app its back to being messed up again. Clearing data, cache & rebooting have no impact.
Can this be repeated by anyone else?
I do not have this issue with stock, cm10.x, miui, or any other ROM I have tried except cm10.2 4.3.
Sent from my LG-P930 using xda app-developers app

Post deleted.

Namuna said:
Can anyone verify that their GPS is working properly?
Click to expand...
Click to collapse
I used Zombies, Run! this morning. Seemed to work fine.

Found battery life was horrible for the 8.30 flash, phone never went into deep sleep. However just flashed the 9.1 and phone did go into deep sleep now.
Nz

Heh, too bad I wasn't around to make one this time.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

rani9990 said:
Heh, too bad I wasn't around to make one this time.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
Good seeing you again.
Any try Google maps yet? I am trying to see if my problem is repeatable.
Sent from my LG-P930 using xda app-developers app

I tried nightly 9.01 but had some random freezes resulting in battery pull. I'm on 9.02 hopefully this one is better
Sent from my LG-P930 using xda app-developers app

Hi all... I am hoping that some help/advice can be given. My issue is that barcode scanner apps, barcode scanner and barcode scanner + both cause the ui to become unresponsive. Phone calls cannot be answered though ringing can be heard etc and phone has to be rebooted. Has anyone experienced the same?
Sent from my LG-P930 using Tapatalk 4

After a day of using 10.2 latest nightly a lot of freezes and screen unresponsive. And I have ballistic HD case which is a ***** to take off every time I need to battery pull . going back to rock stable ICS ROM till they iron out the bugs
Sent from my LG-P930 using xda app-developers app

[Request] CM 10.1 Bluetooth Fix

What's up everyone.. just wondering has anyone came up with a fix for Bluetooth for CM10.1? Becuz ive been running CM10.1 for a while n I got mine running beautifully n I'm waiting for CM 10.2 to get more stable before flashing so for now I wld like to have my Bluetooth working.. If anyone has a fix please if u can share the fix that'll be great.. Thanks..
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

Gen00 said:
What's up everyone.. just wondering has anyone came up with a fix for Bluetooth for CM10.1? Becuz ive been running CM10.1 for a while n I got mine running beautifully n I'm waiting for CM 10.2 to get more stable before flashing so for now I wld like to have my Bluetooth working.. If anyone has a fix please if u can share the fix that'll be great.. Thanks..
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
I am on board. EVERY rom I try I have issues with the BT. I've gone back a little ways. Am going to try a CM 4.1.2. With the stock rom it works like a charm.

Exidouce said:
I am on board. EVERY rom I try I have issues with the BT. I've gone back a little ways. Am going to try a CM 4.1.2. With the stock rom it works like a charm.
Click to expand...
Click to collapse
I saw a Bluetooth fix in a Hercules CM 10.1 but I don't think it works..
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

I found this the other day.. Has anyone tried this? Dont wanna flash if it dont work..
http://forum.xda-developers.com/showthread.php?t=2174100
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

Just went back to cm 10.0 and it's all working. Something in the newer versions that aren't "meant" for our phone is breaking BT.
Edit: CM 10.0 works better meaning I can actually turn it on but need to restart once turned off to turn it back on. It's hit or miss.
Edit2: Tried the "fix" on 10.1.2 (4.2.2) stable and it did not work.

Same Issue
The only rom Ive had good luck with was the 4.1 Carbon. And as stated it was a hit and miss deal, restarts were iffy. However I've had no luck with the "fix" on 10.1 stable either

Strmtrpr said:
The only rom Ive had good luck with was the 4.1 Carbon. And as stated it was a hit and miss deal, restarts were iffy. However I've had no luck with the "fix" on 10.1 stable either
Click to expand...
Click to collapse
The ONLY roms I've used with everything working inc BT were the 4.1.2 NON CM based touchwiz roms. Jedi and infamous as an example. THey have their other minor issues but the basics work.

What is the Bluetooth problem? I'm very curious. I did have an issue with Bluetooth on CM 10.1.2. The problem was that if I was in my car and I had Bluetooth enabled if I forgot to turn of the Bluetooth on the phone before shutting of my car, I couldn't re-enable it without rebooting the phone. Is that the problem you are referring to?
If so, I solved it on my phone. Under the Bluetooth settings I simply set it to be visible only to paired devices and set the Visibility Timeout to Never time out.
Hope this helps.

What happens to me is that I'll use BT n everything is good then it just stops working.. It pretty much turns off by its self and when I try to turn it back on it does nothing i turn it on then turns right off.. Need to reboot for it to work again.. I just wish there was a fix for this..
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

Have you tried what I've done to see if it works for you? I haven't had any problems since doing this.
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app

waresoft said:
Have you tried what I've done to see if it works for you? I haven't had any problems since doing this.
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I'm going to test tmrw to see how it goes..
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

Grow some courage and get 4.3 hellybean have had no issues with Bluetooth love it :thumbup:
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

Matrixk101 said:
Grow some courage and get 4.3 hellybean have had no issues with Bluetooth love it :thumbup:
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
I'm waiting a little to try 4.3 anything until there is an official stable release. How is battery life on 4.3 Hellybean? I get about 16 hours a day on my CM 10.1.2 before I turn it off and charge it overnight. When I turn it off I have about 30% battery left. Is 4.3 Hellybean that good?

I decided to take a chance. I'm installing 4.3 Hellybean as I type this. I hope it is as good as CM 10.1.2 (yes I know it is cm based).
---------- Post added at 08:44 AM ---------- Previous post was at 08:20 AM ----------
Restored my backup. Back on CM 10.1.2.

waresoft said:
Have you tried what I've done to see if it works for you? I haven't had any problems since doing this.
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I tried it today n Bluetooth didn't stick trying it that way..
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

waresoft said:
I decided to take a chance. I'm installing 4.3 Hellybean as I type this. I hope it is as good as CM 10.1.2 (yes I know it is cm based).
---------- Post added at 08:44 AM ---------- Previous post was at 08:20 AM ----------
Restored my backup. Back on CM 10.1.2.
Click to expand...
Click to collapse
Not as good as u wld thought huh..
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

I'm guessing this will never be fixed.. I guess I'll wait for 4.3 to be more stable so I can get Bluetooth working again..
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

I don't get u people i use Bluetooth ever day headset the car has Bluetooth even my truck no issues install the right recovery and then clean wipe 4.3 hellybean format SD card also take a few pic reinstall all old stuff ur good to go 4.3 i think is way fast!!! Love it!!!
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

I didn't have Bluetooth issues with HellyBean . I had random screen flickers. Clunky animations, etc. Not stable enough yet for me. Gen00 I'm sorry to hear the workaround that worked for me didn't work for you. I've tested just about every ROM for our device. The best for me are Stock, JMT 6, or CM 10.1.2. I am using CM as I like it best. I do want to upgrade to CM 10.2 when there is an official stable release.
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app

waresoft said:
I didn't have Bluetooth issues with HellyBean . I had random screen flickers. Clunky animations, etc. Not stable enough yet for me. Gen00 I'm sorry to hear the workaround that worked for me didn't work for you. I've tested just about every ROM for our device. The best for me are Stock, JMT 6, or CM 10.1.2. I am using CM as I like it best. I do want to upgrade to CM 10.2 when there is an official stable release.
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Its cool I tested out CM10.2 yesterday n Bluetooth was working for me on there but it didn't feel as smooth.. Had a couple reboots freezes so I restored CM10.1.. I'll just deal with it til it goes more stable.. It just sucks that The CM team left this untouched n made something stable without fixing something so important to a lot of users..
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

Annoying audio issues with 4.3 ROMs

The problem I'm having with every 4.3 ROM I've tried is that when I switch back to sound from vibrate, my notification sounds, ringtones, and alarms don't work. Only thing that fixes it is a reboot, but after toggling from sound to vibrate, then back to sound, it starts again. Any help? Thoughts? Ideas?
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app

90+ views, and judging by the huge number of responses, I'm going to guess I'm the ONLY one with this issue on 4.3 ROMs. Really?
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app

mbrian27 said:
90+ views, and judging by the huge number of responses, I'm going to guess I'm the ONLY one with this issue on 4.3 ROMs. Really?
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hasn't happened to me on any 4.3 ROM that I've flashed...

mbrian27 said:
The problem I'm having with every 4.3 ROM I've tried is that when I switch back to sound from vibrate, my notification sounds, ringtones, and alarms don't work. Only thing that fixes it is a reboot, but after toggling from sound to vibrate, then back to sound, it starts again. Any help? Thoughts? Ideas?
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I'm having this issue on my GF's GS3, not sure what to do about it either. She was on 10.1 and all was fine, wnt to the latest nightlies last weekend and been having this issue ever since. grr

chillware said:
I'm having this issue on my GF's GS3, not sure what to do about it either. She was on 10.1 and all was fine, wnt to the latest nightlies last weekend and been having this issue ever since. grr
Click to expand...
Click to collapse
If you dirty flashed CM 10.2 on top of CM 10.1. that could be what's causing the errors. It's alway recommended to clean flash whenever there's a .1 Android update.

drx895 said:
If you dirty flashed CM 10.2 on top of CM 10.1. that could be what's causing the errors. It's alway recommended to clean flash whenever there's a .1 Android update.
Click to expand...
Click to collapse
One of the first things I did when I started noticing problems was reflashed, so that wouldn't be the issue.. I have V4A installed, and thought maybe it was causing problems so I didn't install it when I reflashed, but that didn't help either. I'm puzzled.
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app

drx895 said:
If you dirty flashed CM 10.2 on top of CM 10.1. that could be what's causing the errors. It's alway recommended to clean flash whenever there's a .1 Android update.
Click to expand...
Click to collapse
Was clean, even tried it a second time with another full clean wipe.

mbrian27 said:
One of the first things I did when I started noticing problems was reflashed, so that wouldn't be the issue.. I have V4A installed, and thought maybe it was causing problems so I didn't install it when I reflashed, but that didn't help either. I'm puzzled.
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
chillware said:
Was clean, even tried it a second time with another full clean wipe.
Click to expand...
Click to collapse
Hmm, then I'm clueless. Has anyone tried re-flashing stock through Odin?

Did that about a week ago, or else I would try
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app

Working mk4 mms and wallet fix

What we have hear is a working mms fix for people that are running note 3 features on an mk4 rom and the stock mms stopped working I also have made a wallet fix both can be flashed in cwm and twrp flash away and report results with what rom thankyou
http://www.androidfilehost.com/?a=show&w=files&flid=10560
I did not make the Mms fix just made it a zip for people so it is not too complicated ianmb had the idea for the mms fix
The google wallet fix is mine from much trial and error
Sent from my SPH-L900 using Tapatalk 2

Witch file is just for the mms fix or do I have to download and flash both of them
Sent from my SPH-L900 using xda app-developers app

htchd2king said:
Witch file is just for the mms fix or do I have to download and flash both of them
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
Click on the link and it will take you to the download page for both separate downloads. You will see the descriptions of each being self explanatory. MMS works perfect. I flashed via TWRP and all was good afterwards.

Thank you half sleep so just read the first part of each file and didn't realize the name was different after the first part.
Sent from my SPH-L900 using xda app-developers app

No worries.

Hi, I flashed, was able to send pictures, but I'm not receiving any..Am I needing to change anything else? Running Synergy Rom Thanks!
Sent from my SPH-L900 using xda app-developers app

bbwarmth said:
Hi, I flashed, was able to send pictures, but I'm not receiving any..Am I needing to change anything else? Running Synergy Rom Thanks!
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
I'm running it on synergy as well maybe try a fresh download and flash again let me know
Sent from my SPH-L900 using Tapatalk 2

What does the wallet fix do? I can't set up tap and pay but I think it's because the secure element is bricked due to me not disabling wallet before flashing a new ROM. Does this patch fix that?
Sent from my SPH-L900 using Tapatalk

SublimeJJ99 said:
What does the wallet fix do? I can't set up tap and pay but I think it's because the secure element is bricked due to me not disabling wallet before flashing a new ROM. Does this patch fix that?
Sent from my SPH-L900 using Tapatalk
Click to expand...
Click to collapse
It fixes a problem with nfc when you get tap and pay setup failed it can't fix a fried nfc but it won't hurt to try
Sent from my SPH-L900 using Tapatalk 2

evo bryan said:
It fixes a problem with nfc when you get tap and pay setup failed it can't fix a fried nfc but it won't hurt to try
Sent from my SPH-L900 using Tapatalk 2
Click to expand...
Click to collapse
Sounds good. I'll do a Nandroid and then flash this to see if it works. Thanks!
Sent from my SPH-L900 using Tapatalk

Just flashed it and tap and pay is now set up. Thanks for this!
Sent from my SPH-L900 using Tapatalk

SublimeJJ99 said:
Just flashed it and tap and pay is now set up. Thanks for this!
Sent from my SPH-L900 using Tapatalk
Click to expand...
Click to collapse
Ya most of the new mk4 roms have messed up nfc and you get the tap and pay setup error thought I had killed my nfc as well went back to mc2 and my nfc worked so with some playing around I got it to work
Sent from my SPH-L900 using Tapatalk 2

Any Devs supporting this?
I tried the Wallet fix. After reboot, tap and pay sets up, but my NFC services STOP on boot up. If I try to restart the service, it stops moments after. Have to do a restore on the rom. NFC works fine before applying this "FIX". Please advise.

jindelic said:
I tried the Wallet fix. After reboot, tap and pay sets up, but my NFC services STOP on boot up. If I try to restart the service, it stops moments after. Have to do a restore on the rom. NFC works fine before applying this "FIX". Please advise.
Click to expand...
Click to collapse
What rom I'm on Synergy without a problem so far
Sent from my SPH-L900 using Tapatalk 2

I am on the 4.3 smooth note2/3 rom. Latest version.
Sent from my SPH-L900 using XDA Premium 4 mobile app

Ok now this is strange. Followed directions and after reboot nfc services crash. When it restarts and I tap phone to phone it instantly crashes after it vibrates. But even though the nfc services crash, wallet does setup.
So went to the store to get some smokes and I used tap and pay to try to pay, knowing that the services would crash, but what happens is the payment goes through and services didn't crash. I get home and try phone to phone again. And services crash again. Any ideas?
Sent from my SPH-L900 using XDA Premium 4 mobile app

This thread still supported ?
Sent from my SPH-L900 using XDA Premium 4 mobile app

jindelic said:
Ok now this is strange. Followed directions and after reboot nfc services crash. When it restarts and I tap phone to phone it instantly crashes after it vibrates. But even though the nfc services crash, wallet does setup.
So went to the store to get some smokes and I used tap and pay to try to pay, knowing that the services would crash, but what happens is the payment goes through and services didn't crash. I get home and try phone to phone again. And services crash again. Any ideas?
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I'm back let me try some combinations and see what I can get wish someone could figure out why mk4 has this problem I'm kinda thinking it has something to do with removing Knox
Sent from my SPH-L900 using Tapatalk 2

Will the wallet fix work for 4.4 based CM roms?
Sent from my SPH-L900 using Tapatalk

Subiegsr said:
Will the wallet fix work for 4.4 based CM roms?
Sent from my SPH-L900 using Tapatalk
Click to expand...
Click to collapse
Never tried it and I really don't think it us a good idea to try might really Bork things up
Sent from my SPH-L900 using Tapatalk 2