[Q] Help switching from SuperSU to Superuser, please!!! - T-Mobile Samsung Galaxy S 4

Hello,
So, I have the T-Mobile S4, obviously, and I updated to 4.3 using Kies. Well, long story short, after the updated I couldn't use WiFi at all. I ended up using Odin and putting the stock firmware back on, and that fixed everything.
Now, I rooted it using this thread http://forum.xda-developers.com/showthread.php?t=1980683 but, the SuperSU root isn't letting me use OBackup, now. Before, when I had Superuser, it let me use it just fine.
Is there any way to switch from SuperSU to Superuser? I've been reading a few threads but they are all for 4.2.2 and I'm not sure if it'll work on 4.3. I read on one of the threads to use "CWM recovery" and use Odin and that would work, but again, that's 4.2.2.
Any ideas would be great.

Have you tried downloading it from the playstore?
Sent from my SGH-M919 using XDA Premium 4 mobile app

re: root issue
PwnYourFace said:
Hello,
So, I have the T-Mobile S4, obviously, and I updated to 4.3 using Kies. Well, long story short, after the updated I couldn't use WiFi at all. I ended up using Odin and putting the stock firmware back on, and that fixed everything.
Now, I rooted it using this thread http://forum.xda-developers.com/showthread.php?t=1980683 but, the SuperSU root isn't letting me use OBackup, now. Before, when I had Superuser, it let me use it just fine.
Is there any way to switch from SuperSU to Superuser? I've been reading a few threads but they are all for 4.2.2 and I'm not sure if it'll work on 4.3. I read on one of the threads to use "CWM recovery" and use Odin and that would work, but again, that's 4.2.2.
Any ideas would be great.
Click to expand...
Click to collapse
The easiest way to solve the problem is to re-odin flash stock 4.2.2 firmware.
After that download CF-AUTOROOT and odin flash it.
After that you will be fully rooted and all apps which require root will work again.
Here is the direct download link for cf-autoroot: http://download.chainfire.eu/328/CF...jfltetmo-jfltetmo-sghm919.zip?retrieve_file=1
p.s. you might need to re-flash cwm or twrp custom recovery.
Good luck!

Android_Monsters said:
Have you tried downloading it from the playstore?
Sent from my SGH-M919 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yeah; I tried downloading it from the playstore, but all it tells me once I open it is that the it is oudated and needs to update. I hit "Update" and then it crashes the app, and restarts the phone into recovery mode with no prompts except "reboot phone".
And the thing is I do NOT want to go back to 4.2.2. I want to find a way back to Superuser instead of SuperSU.

Misterjunky said:
The easiest way to solve the problem is to re-odin flash stock 4.2.2 firmware.
After that download CF-AUTOROOT and odin flash it.
After that you will be fully rooted and all apps which require root will work again.
Here is the direct download link for cf-autoroot
p.s. you might need to re-flash cwm or twrp custom recovery.
Good luck!
Click to expand...
Click to collapse
The thing is I don't want to go back to 4.2.2. I like 4.3, I just need Superuser instead of SuperSU.
Sent from my SGH-M919 using xda app-developers app

Related

[Q] SPH-L900 update, already rooted?

Hi, So about 5 days ago I rooted my Sprint Samsung Galaxy Note II using the video Max Lee made from galaxynote2root(dot)com, and about 36 hours later I get a notification for an OTA update. I kept off updating because I didn't really know what to do. I'm really new to this and there's still a lot I have to learn. Anyway, I ran the update and it restarted my phone and went to the TWRP screen. I restarted the system and it stopped notifying me about the update. And I checked and it says that my system is up to date. And I also checked to see if I still have root with a root checker app I downloaded, and it said I still had root also. So, was the app wrong and I don't have root anymore? And after I updated should I have restored the backup I made when I originally rooted? Also, thanks for any help, I've looked around and couldn't find anyone else with this question.
Your phone automatically downloaded the update and was waiting to be powercycled to install. However it failed to install because it requires stock recovery to install and you dont have it. So your phone boots back up and all is good with no changess.
Sent from my SPH-L900 using xda app-developers app
Reply
xKrisx said:
Your phone automatically downloaded the update and was waiting to be powercycled to install. However it failed to install because it requires stock recovery to install and you dont have it. So your phone boots back up and all is good with no changess.
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
So my phone is not updated, but what if I want to update in the future? I just download and run stock recovery?
same issue
Sandelorian said:
So my phone is not updated, but what if I want to update in the future? I just download and run stock recovery?
Click to expand...
Click to collapse
I also have the same issues. I did a back up of my original roms and re installed using twrp . I down load the new update and when its going to restart it goes into to twrp menu. From there i am stuck on what to do.
It failed because you're not on stock recovery. If flashing the stock ota, you need stock recovery.
If you have twrp recovery, read and review this thread:
http://forum.xda-developers.com/showthread.php?t=2148604
thunderwagn said:
It failed because you're not on stock recovery. If flashing the stock ota, you need stock recovery.
If you have twrp recovery, read and review this thread:
http://forum.xda-developers.com/showthread.php?t=2148604
Click to expand...
Click to collapse
Before I rooted my note I made a back up using twrp. Is that not a stock recovery file ?.
Yes and no. That's basically just a backup of the stock rom that's only flashable via twrp since that is the recovery used to create the nand. So yes it is a recovery but only flashable thru twrp.
Sent from my SPH-L900 using xda app-developers app
thunderwagn said:
Yes and no. That's basically just a backup of the stock rom that's only flashable via twrp since that is the recovery used to create the nand. So yes it is a recovery but only flashable thru twrp.
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
Ok well I did recovered using twrp and it installed and took me back that state before the root. I was thinking that took me back to original state and then update . I did download the update but as it was restarting the twrp home sceen would pop up and not update. So now I have no root or new update. Its funny it was easier to root then to unroot.
The link I posted above would have allowed you to flash new firmware and ma7 through twrp. No unroot reroot required. ..
And like stated, you can't update the stock ota update without stock recovery.
Sent from my SPH-L900 using xda app-developers app
Confused about all the links!
thunderwagn said:
The link I posted above would have allowed you to flash new firmware and ma7 through twrp. No unroot reroot required. ..
And like stated, you can't update the stock ota update without stock recovery.
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
There are 6 links on that thread, one for odex and deodex (which I have no idea what it does), and then the 2 links for ma7 one all in one, and one just regular. And then there are another set of 2 links for the kernals, one regular and one modified. I guess what I'm asking is, how do I install these and which ones should I install? I have no idea what any of them do anyway.
How
how do we go about it and what files exactly do we need? why is everyone so vague?
thunderwagn said:
The link I posted above would have allowed you to flash new firmware and ma7 through twrp. No unroot reroot required. ..
And like stated, you can't update the stock ota update without stock recovery.
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
Links go to mystical places with instructions and posts and helpful comments and answers. All you have to do is click and read and absorb the knowledge.
thunderwagn said:
The link I posted above would have allowed you to flash new firmware and ma7 through twrp. No unroot reroot required. ..
And like stated, you can't update the stock ota update without stock recovery.
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
I have flashed over 30 SPH-L900 (Note 2) fron Sprint to Boost.
I do everything on CDMA (paid version) 3.9.
Since the L.900VPAMAZ update I can no longer change the esn to Boost because the 16 digit CDMA passcode is no longer the default passcode for the Note 2. The old pascode: 01F2030F5F678FF9 still works for the Galaxy S2 and S3 but is no longer recognized on CDMA Workshop or QXDM.
If anyone knows the new passcode please let me know.
If I find it I will post it so that noone else has this problem.
Thanks!

Update without OTA and Kies

Been searching and I can't figure this out.
I have a rooted S3 and I can't get 4.1.2 OTA.
I also have no access to a PC I can install Kies on.
What is another solution to getting the update on a rooted S3?
Do you have a custom recovery installed? If so, you can just flash a debloated stock 4.1.2 ROM from the development section.
Sent from my SGH-T999 using XDA Premium 4 mobile app
joshka89 said:
Been searching and I can't figure this out.
I have a rooted S3 and I can't get 4.1.2 OTA.
I also have no access to a PC I can install Kies on.
What is another solution to getting the update on a rooted S3?
Click to expand...
Click to collapse
Root66. It's in the android dev section.
Aerowinder said:
Root66. It's in the android dev section.
Click to expand...
Click to collapse
Yeah I have CWM recovery.
This shouldn't mess with settings right? the reason I haven't messed with ROMs on this one is because it's all set up like I like it.
EDIT: NV can't flash with Odin. I have a Chromebook. I need a zip to send over Kies air and flash through CWM
joshka89 said:
Yeah I have CWM recovery.
This shouldn't mess with settings right? the reason I haven't messed with ROMs on this one is because it's all set up like I like it.
Click to expand...
Click to collapse
I never recommend dirty flashing (flashing one ROM over another, especially when updating to a newer version of android) it eventually just leads to problems and you'll have to start over again sooner or later.
If you do it the right way, you will have to re-setup the ROM again, pictures, music and files like that will be fine but you'll lose all of your settings.
If you do decide to flash ROMs, before you do, search how to backup your imei, you'll be glad you did if you ever lose it.
Sent from my SGH-T999 using XDA Premium 4 mobile app
It's stock rooted is all, don't want to delete everything just for 4.1.2.
I'll keep searching but it would be easiest to find the update zip file, especially since I won't have access to Odin or anything else to back stuff up and flash in an efficient way
EDIT:
Would sending this zip to the sdcard and apply update through CWM work?
http://honai-android.blogspot.com/2013/05/how-to-update-galaxy-s3-t-mobile-sgh.html
joshka89 said:
It's stock rooted is all, don't want to delete everything just for 4.1.2.
I'll keep searching but it would be easiest to find the update zip file, especially since I won't have access to Odin or anything else to back stuff up and flash in an efficient way
EDIT:
Would sending this zip to the sdcard and apply update through CWM work?
http://honai-android.blogspot.com/2013/05/how-to-update-galaxy-s3-t-mobile-sgh.html
Click to expand...
Click to collapse
That's the firmware for Odin it looks like. If you want you can just download the OTA from my firmware thread. Flash in CWM and it should work and allow you to preserve root. Probably the easiest way to get what you want. If you can use Odin from another computer, root66 is definitely preferred, but there's more than one way to do it.
I agree about the dirty flashing, for the most part. Since you are simply updating the stock firmware, you should be fine. Clean is better of course, but it's up to you. Without starting clean.you do run the risk of having issues down the road, and then you wouldn't even know why.
If you decide to try the OTA, please take a few min to read what I've got there.
Sent from my SCH-I535 using Tapatalk 4

Regain root from mobile

In an attempt to unroot and return to stock for 4.4 OTA I flashed stock firmware and unrooted my device in the process, so far so good.
I reboot my phone after to initiate the OTA but of course I can't download the OTA because my device status is still custom and without root I can't triangle away or do anything.
I'm still trying to figure out how to get root back onto my phone from my phone since I don't have access to a computer where I'm at. I'm basically just screwed and also stuck on MDL baseband with a MK2 build running 4.3 stock so I'm getting no downloads at all. XDA the app itself too 10min to download
Any insight would be greatly appreciated...I knew I should have just waited until I I had access to a pc but I jumped the gun of course. I've been looking around a lot and the only methods of rooting I've found require or use a pc.
Sent from my SGH-M919 using xda app-developers app
JORDVN said:
In an attempt to unroot and return to stock for 4.4 OTA I flashed stock firmware and unrooted my device in the process, so far so good.
I reboot my phone after to initiate the OTA but of course I can't download the OTA because my device status is still custom and without root I can't triangle away or do anything.
I'm still trying to figure out how to get root back onto my phone from my phone since I don't have access to a computer where I'm at. I'm basically just screwed and also stuck on MDL baseband with a MK2 build running 4.3 stock so I'm getting no downloads at all. XDA the app itself too 10min to download
Any insight would be greatly appreciated...I knew I should have just waited until I I had access to a pc but I jumped the gun of course. I've been looking around a lot and the only methods of rooting I've found require or use a pc.
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
A stock firmware package makes the phone all stock. MDL baseband on an MK2 build means you didn't flash a stock firmware. Which 'stock' firmware did you flash?
As to root, did this 'stock' firmware also flash recovery? if it didn't you can download the recovery flashable supersu zip from chainfire's website into the phone and do it that way. Otherwise, I don't think there is a way to get root access from the OS itself, unless you find an exploit that grants su access so you can make system writable and push supersu.
qxps said:
A stock firmware package makes the phone all stock. MDL baseband on an MK2 build means you didn't flash a stock firmware. Which 'stock' firmware did you flash?
As to root, did this 'stock' firmware also flash recovery? if it didn't you can download the recovery flashable supersu zip from chainfire's website into the phone and do it that way. Otherwise, I don't think there is a way to get root access from the OS itself, unless you find an exploit that grants su access so you can make system writable and push supersu.
Click to expand...
Click to collapse
I'm can't remember where I got this firmware from but, it was from a thread within the general section which stated it was stock so I'm just unsure on that part. I will try to root using your information given. This did return to stock recovery as well but when I try to flash anything through it I get a signature verification failure. I've never had this happen where baseband and build didn't match after returning to a stock firmware. My guess is that I just used something I shouldn't have. Thanks for the help.
Sent from my SGH-M919 using xda app-developers app
After downloading the supersu and attempting to flash it through stock recovery, I'm still getting signature verification failure then the device reboots.
Sent from my SGH-M919 using xda app-developers app
JORDVN said:
After downloading the supersu and attempting to flash it through stock recovery, I'm still getting signature verification failure then the device reboots.
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
Unfortunately, rooting or installing custom recovery needs to be done through a computer. As of this moment, there are no root exploits that can be done via the phone itself. I'm sorry.
JORDVN said:
After downloading the supersu and attempting to flash it through stock recovery, I'm still getting signature verification failure then the device reboots.
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
That's because you need a custom recovery, it's why I asked whether the firmware you flashed replaced recovery or not.
As vigz said, you need a computer to at least flash cf root with odin.
qxps said:
That's because you need a custom recovery, it's why I asked whether the firmware you flashed replaced recovery or not.
As vigz said, you need a computer to at least flash cf root with odin.
Click to expand...
Click to collapse
Okay I've pretty much come to that conclusion after continuously searching with no solid method. I'll just have to deal with the baseband problem for now until I get back home. Wifi toggle doesn't work at all either. Is that a baseband problem, correct?
Sent from my SGH-M919 using xda app-developers app
Vigz said:
Unfortunately, rooting or installing custom recovery needs to be done through a computer. As of this moment, there are no root exploits that can be done via the phone itself. I'm sorry.
Click to expand...
Click to collapse
Thanks for the insight, I'll have to make due with what I have for now
Sent from my SGH-M919 using xda app-developers app

[Q] Root for Boost gs3 with version NDC?

I really can't find anything on a root method for a Boost S3 on 4.4. There's a lot of talk about ND8, but I'm running L710VPUCNDC. I'm wondering if the method can be swapped between the two or not. Any help or a point in the right direction would be much appreciated. Thank you.
dezined said:
I really can't find anything on a root method for a Boost S3 on 4.4. There's a lot of talk about ND8, but I'm running L710VPUCNDC. I'm wondering if the method can be swapped between the two or not. Any help or a point in the right direction would be much appreciated. Thank you.
Click to expand...
Click to collapse
If you are on 4.4.2 then the first place you should go is HERE. Then check out THIS thread. Also I believe that the thread HERE still works to root 4.4.2 . As always be sure to read everything carefully before doing anything.
prboy1969 said:
If you are on 4.4.2 then the first place you should go is HERE. Then check out THIS thread. Also I believe that the thread HERE still works to root 4.4.2 . As always be sure to read everything carefully before doing anything.
Click to expand...
Click to collapse
Well put together my friend, but it's much much easier than that last post.
1. Flash Philz through Odin
2. Reboot to recovery, click Philz settings
3. Check the reroot option
4. Click yes to apply
5. Reboot, install SuperSU from play store
6. Open SuperSU, disable Knox
7. Profit
Sent from my SM-G900P using XDA Free mobile app
jdsingle76 said:
Well put together my friend, but it's much much easier than that last post.
1. Flash Philz through Odin
2. Reboot to recovery, click Philz settings
3. Check the reroot option
4. Click yes to apply
5. Reboot, install SuperSU from play store
6. Open SuperSU, disable Knox
7. Profit
Sent from my SM-G900P using XDA Free mobile app
Click to expand...
Click to collapse
:good::good::good:
True enough .
Ok, easy enough, however when I boot back into the OS and install SuperSU, as soon as I launch it, it informs me the binary isn't installed, that it can't install it, and then closes SuperSU. Did I use the wrong Philz? I used philz_touch_6.00.8-d2spr.tar.md5 in Odin 3.04.
dezined said:
Ok, easy enough, however when I boot back into the OS and install SuperSU, as soon as I launch it, it informs me the binary isn't installed, that it can't install it, and then closes SuperSU. Did I use the wrong Philz? I used philz_touch_6.00.8-d2spr.tar.md5 in Odin 3.04.
Click to expand...
Click to collapse
Use the latest philz, he's on like version 6.41 or something like that by now
Sent from my SM-G900P using XDA Free mobile app
dezined said:
Ok, easy enough, however when I boot back into the OS and install SuperSU, as soon as I launch it, it informs me the binary isn't installed, that it can't install it, and then closes SuperSU. Did I use the wrong Philz? I used philz_touch_6.00.8-d2spr.tar.md5 in Odin 3.04.
Click to expand...
Click to collapse
Did you ever get this root to work with a newer copy of Philz?
dezined said:
Ok, easy enough, however when I boot back into the OS and install SuperSU, as soon as I launch it, it informs me the binary isn't installed, that it can't install it, and then closes SuperSU. Did I use the wrong Philz? I used philz_touch_6.00.8-d2spr.tar.md5 in Odin 3.04.
Click to expand...
Click to collapse
Were you able to get your S3 rooted with a newer version of Philz?
Hey guys.
I just rooted it with TowelRoot V3 - L710VPUCNDC. No issues what so ever.

How to root Note running 4.4.2

So I haven't been on xda for a while. I've rooted my note a good 12x. I got a replacement and decided to keep it stock as long as possible. Now my phone just pisses me off with touchwiz. I wanna flash a twrp or cwm so i can flash cm11 and so on. I know Samsung just puahed this new update out so idk if anyone has rooted it yet. Does any one know how to root and instal cwm on 4.4.2? Really want to flash a rom. Thank you very much for time and feedback
Sent from my SAMSUNG-SGH-I317 using XDA Free mobile app
Jonahng1994 said:
So I haven't been on xda for a while. I've rooted my note a good 12x. I got a replacement and decided to keep it stock as long as possible. Now my phone just pisses me off with touchwiz. I wanna flash a twrp or cwm so i can flash cm11 and so on. I know Samsung just puahed this new update out so idk if anyone has rooted it yet. Does any one know how to root and instal cwm on 4.4.2? Really want to flash a rom. Thank you very much for time and feedback
Sent from my SAMSUNG-SGH-I317 using XDA Free mobile app
Click to expand...
Click to collapse
I used cf auto root heres the link
http://forum.xda-developers.com/showthread.php?t=1980644
Can you please confirm that cf worked on 4.4.2? Their site only shows compatibility up to 4.3. I've been searching everywhere, but found no confirmed reports of cf or anything else working on 4.4.2. I want to root my i317 while retaining the stock rom so that I can enable tethering.
Sent from my SAMSUNG-SGH-I317 using XDA Free mobile app
MikeKidder said:
Can you please confirm that cf worked on 4.4.2? Their site only shows compatibility up to 4.3. I've been searching everywhere, but found no confirmed reports of cf or anything else working on 4.4.2. I want to root my i317 while retaining the stock rom so that I can enable tethering.
Sent from my SAMSUNG-SGH-I317 using XDA Free mobile app
Click to expand...
Click to collapse
Ive used it myself it works just fine
CF method worked on my i317 with Stock 4.4.2. I seen that the compatibility was up to 4.3 but I tried it anyways.
Sent from my SAMSUNG-SGH-I317 using Tapatalk
What recovery are you using, and how did you install it, TWRP bricked mine.
C auto root is flashed with odin in download mode. While rooting, it installs a custom recovery.
maybe it's kitkat, but it didn't install one for me. When I went into recovery, it was the normal factory recovery, which allowed nothing. I tried with Rom Manager, but nothing.
CF worked
I had to manually install the latest Supersu apk then update the binaries to get it working afterword, but I'm finally rooted
Now to get tether working
Sent from my SAMSUNG-SGH-I317 using XDA Free mobile app
did you get a recovery to work, and if you did, how!
jappel2 said:
did you get a recovery to work, and if you did, how!
Click to expand...
Click to collapse
Download a recovery like philz and flash it in odin while the phone is in download mode
Let me ask you this:
1. root with odin.
2. install CWM with odin?
3. Not I have 4.4.2 stock rom with root.
4. Can I install a custom rom with 4.4.2. stock rom still on the phone?
jappel2 said:
Let me ask you this:
4. Can I install a custom rom with 4.4.2. stock rom still on the phone?
Click to expand...
Click to collapse
Yes, if 1 - 3 is accomplished, you are ready for experiments in custom roms. You use the recovery to flash.
But make sure you have the latest recovery, and that you check the rom instructions a few times before you do anything.
Ok....cwm from Rom manager, or twrp through odin? I don't mean to break chops, I've rooted a captivate and played with it for a year, when my wtty was over with this phone, I rooted it, and had JediX 19 on it. I went back to stock, and then 4.4.2 When samsung stock 4.4.2 was installed, for some reason, it keeps bricking on me.
Ok, I rooted, and installed twrp from odin,.... passed. When I go into recovery, it's not there.
Ok. Hopefully someone has an answer. I rooted with CF auto root, Odin....fine. Installed CWM, fine. Downloaded SuperSU.....unfortunately superuser stopped working everytime I press on it. I cannot uninstall it, because it DOES NOT show up in application manager. I installed root checker, and says phone is not rooted. I can get into clockwork MOD, but no zip files show up. Can I use Odin to re flash CF auto root?, or just quit, I would hate to brick this again.
Sounds like Knox is blocking you. After rooting, install the latest Supersu apk (2.02) and install manually. Then when you open it, it should ask to update binaries. Let it, then it should ask about dialing Knox. Click yes. Viola, you're fully rooted. After the above is done, you can play with ROMs n such.
Up till that point, there is no need to flash anything, as auto root is designed to do the work for you from a pure stock rom.
Sent from my SAMSUNG-SGH-I317 using XDA Free mobile app
MikeKidder said:
Sounds like Knox is blocking you. After rooting, install the latest Supersu apk (2.02) and install manually. Then when you open it, it should ask to update binaries. Let it, then it should ask about dialing Knox. Click yes. Viola, you're fully rooted. After the above is done, you can play with ROMs n such.
Up till that point, there is no need to flash anything, as auto root is designed to do the work for you from a pure stock rom.
Sent from my SAMSUNG-SGH-I317 using XDA Free mobile app
Click to expand...
Click to collapse
Thank you sir! I went into ES file explorer, and manually installed SuperSU. Although it never asked about dialing KNOX. I installed Root Checker, and it says I'm rooted. Appreciate yours and everyone else's help. Have a great day.

Categories

Resources