Please, anyone, I can't seem to find a mirror of a working Odin package anywhere out there in the ether. It doesn't matter what firmware revision it is so long as it is a full package that can restore and repartition. I will also provide a mirror to the file when I receive it.
Thanks,
~Terror_1
Terror_1 said:
Please, anyone, I can't seem to find a mirror of a working Odin package anywhere out there in the ether. It doesn't matter what firmware revision it is so long as it is a full package that can restore and repartition. I will also provide a mirror to the file when I receive it.
Thanks,
~Terror_1
Click to expand...
Click to collapse
You want the over come package.
https://drive.google.com/folderview?id=0B1vgV8Tn0LSHejA4bU5WRktMeTQ&usp=sharing
I've shared it. But unsure if it's for the sch-i8000, i have the p1000 GSM version. You may want to look at the documentation for the overcome wipe (it's very popular to get your tab back to stock or for flashing new roms or unbricking soft bricks) to see if ti's compatible. There is a PDF somewhere in the xda forums here for tab that recreates the instruction for Overcome.
EDIT:
http://forum.xda-developers.com/showthread.php?t=1881981
There someone has recreated. And looks like GSM only, so I think you're out of luck there.
So I did a quick search of sch-i800, and bam:
http://forum.xda-developers.com/showthread.php?t=1275031
Looks like some stock stuff for that is listed there.
Thanks dardack for the try but I don't think that any GSM or Sprint files are going to work properly.
Last night I started working through a stack of HDD's and think I found what I need. I am planning on testing today and if it works I will post a mirror.
Problem with all of this is that the Verizon tablets, I don't think, where very popular, and since 2-3 years have passed since release it's almost impossible to find working links anymore.
Terror_1 said:
Thanks dardack for the try but I don't think that any GSM or Sprint files are going to work properly.
Last night I started working through a stack of HDD's and think I found what I need. I am planning on testing today and if it works I will post a mirror.
Problem with all of this is that the Verizon tablets, I don't think, where very popular, and since 2-3 years have passed since release it's almost impossible to find working links anymore.
Click to expand...
Click to collapse
VinnyOfLegend managed to post up to Mega what he is using.
https://mega.co.nz/#!0h1EXDpY!Cpc_ugHvoUjpEyJWlQ4ChiLMUjtBzLam2eIX28ph3hw
I've also created a mirror which can be found here
http://files.thelegendarykraken.com/Android/Galaxy Tab 7" Verizon P1C/
Related
I was having problems configuring a new T-mobile MDA III with blackberry. I contacted T-Mobile who directed me to install the latest rom image (MDA3_TMUK_v106160_SHIP0307.exe). After installing this, blackberry is working fine with our BES server, but I don't have any camera software on the device.
I do not know if the software was there before the rom flash, I did not look.
It does have a camera, but no way to use it. I have spoken to T-mobile again but I have not received a response, I thought I would try here to see if anyone here has any ideas. Is there a cab available that I could use to install the missing software? I have performed a hard reset but still no joy.
T.I.A
Wiggy
T-Moble (germany that is) at one time shipped two versions of the update software for there devices, one with camera one with out.
Back in the old days a xda patch came out to update a SX66 no camera rom 1.31 with a camera, You can find this on wiki, also you can try the cab for the WM5 rom (cameraFix) that might work. These you need to play with.
Best option is to get a rom from TMO that supports the camera
Cheers MDAIIIUser,
I downloaded Camera2K5_v1.rar from wiki, (ftp://xda:[email protected]/BlueAngel/BA_WM5/Patches/Camera2K5_v1.rar) and this seems to work a treat.
T-mobile are still looking to the problem. They may yet send me a new Rom image with the software included.
Thanks again.
Wiggy
I've just posted about this problem :shock:
Good to know there are others out there with similar experiences!
I'm going to give that link a try and see where I get.
wiggy9906 said:
Cheers MDAIIIUser,
I downloaded Camera2K5_v1.rar from wiki, (ftp://xda:[email protected]/BlueAngel/BA_WM5/Patches/Camera2K5_v1.rar) and this seems to work a treat.
T-mobile are still looking to the problem. They may yet send me a new Rom image with the software included.
Thanks again.
Wiggy
Click to expand...
Click to collapse
..I've downloaded this, but how do I install it on the MDAIII?
please forgive my ignorance!
If you extract the RAR file and you end up with a cab file then copy it to your device and tap on it in file manager.
I have know idea what is in the rar file.
Busy day today
Anyways, I decided to discontinue 25005 since it had a graphical bug, which after spending several hours looking for answers, I couldn't fix...
So, here is the newest build (yes, even newer than 25005)
Build log is pretty much the same as 25005 but with a few exceptions
*Increased pagepool size to 18 MB!
*New Build 25005 (no clue about which COM branch it belongs to, so please don't ask )
*Added Bing
*MSN Widgets are Back
*Removed Opera since there is a newer version out there (with Flash support!). I haven't gotten the cab, so I will let you all install it and let me know
*Internet Sharing Added
*FaceBook Mobile is Back!
*Added QuickGPS (for faster lockons... or so I hear)
*Dialer Lag is gone!!!
*The only extra that I don't like (and I did not put in) was haptic feedback when touching the start menu. If anyone knows how to get rid of this... please.
Click to expand...
Click to collapse
Removed
*Showcase
*Mega dialer (simply left stock). Probably will try to use the GSM dialer from NFS's thread.
*Added Arcsoft MMS to UC Folder
*Added Netfront Concept 4 (latest one) to UC (replace with your choice of browser if you like something else). I find Opera very hard to use without an accelerometer and a scroll wheel, so I decided not to cook it in.
*Updated GoogleMaps to the latest publicly available
*I added a pretty cool looking theme for 6.5 but it was the cause for my funny looking icons and scrollbars, so use at your own risk.
Without Further ado, here is the LINK
[highlight]Installation Notes:[/highlight]
[highlight]Your device must be unlocked for this to work. If you don't know how to unlock it, there is a link on my signature with a guide on how to do this. Also, this is only for the HTC Vogue - which is a CDMA device (no SIM card). It will NOT work for any device that doesn't fall under this. Not sure if you have a Vogue? Go to the WIKI and find out. I am not responsible for damage to your device (not that anything should happen, but legal disclaimers are meant for the "what ifs" )[/highlight]
Drop the XDA_UC folder located in the rar file onto the root of your SD card. Flash and soft reset. The UC process will start upon second boot. You can add/remove any cabs that you want to (or not want) so that the system will install them automatically.
[highlight]CDMA Weather Fix:[/highlight]
Select the weather in your city in the Manila tab prior to installing this fix. Once it is selected, install and soft reset.
LINK to Weather Fix
[highlight]Have a different Carrier than MetroPCS?[/highlight]
Go here (thanks codf4ther!)
Please enjoy and if you like it and feel like buying me coffee... I will gladly accept it
ScreenShots
I know how some of you are picky about this, so here you go...
Bugs
I am happy to say that none so far
Addons, Fixes, and Miscellaneous...
Provisioning CABS Thread (thanks to codybear!!) - Use the cabs located in here only if you are on a carrier other than MetroPCS.
http://forum.xda-developers.com/showpost.php?p=3680840&postcount=3
Egz - glad to see you have a new one out! I'm downloading right now and will flash sometime tomorrow. By the way, in post #2 the screenshots didn't show up, just thought I would let you know. I'll let you know how the new ROM is working once I get it flashed.
Irishpride said:
Egz - glad to see you have a new one out! I'm downloading right now and will flash sometime tomorrow. By the way, in post #2 the screenshots didn't show up, just thought I would let you know. I'll let you know how the new ROM is working once I get it flashed.
Click to expand...
Click to collapse
hehe, I am aware of the screenshots. I was trying to get My Mobiler to see my device, but it just refused to connect. I will try to get something like CapSure or some other tool and get the screenshots directly from my device...
Will this work for Verizon?
Heresfitz said:
Will this work for Verizon?
Click to expand...
Click to collapse
It should as long as you install the Verizon provisioning cab over top NFSFan's roms are built for Bell by default but they run fine on other carriers. I'm not sure if there is something special about MetroPCS that would cause issues but I think you should be fine.
codf4ther said:
It should as long as you install the Verizon provisioning cab over top NFSFan's roms are built for Bell by default but they run fine on other carriers. I'm not sure if there is something special about MetroPCS that would cause issues but I think you should be fine.
Click to expand...
Click to collapse
Right on the money. I will put a link to Codybear's post, which has most of the carrier specific cabs. Thanks for the reminder, cod!
egzthunder1 said:
Right on the money. I will put a link to Codybear's post, which has most of the carrier specific cabs. Thanks for the reminder, cod!
Click to expand...
Click to collapse
Which instructions do you follow for Verizon? The ones he has listed or the ones he links to in NFSFan's ROM post?
scotttr said:
Which instructions do you follow for Verizon? The ones he has listed or the ones he links to in NFSFan's ROM post?
Click to expand...
Click to collapse
The instructions for Verizon that cody gave seem pretty much on the money from what I have read. Try that and if it doesn't work, let me know and I'll get you something else . BTW, the MMS composer in the UC folder is preset for VZW, you may not need to do anything...
The new rom is great, but aggggg the vibration! I did a google to find a registry key to turn it down (not off) and came up dry. Otherwise solid work so far!!! Thanks.!
gjbnh said:
The new rom is great, but aggggg the vibration! I did a google to find a registry key to turn it down (not off) and came up dry. Otherwise solid work so far!!! Thanks.!
Click to expand...
Click to collapse
what vibration??
If you got my 25005, there is a fix for it (you have to edit the registry in a couple of places), which I posted on that thread (it is related to Showcase and it was driving me nuts too ). My advise would be to go with 28230. It seems a bit more stable...
Ouch my bad
Sorry, but I've flash my phone at least 5 times this week, and incorrectly identified the current rom. I need to flash to this one. My Bad
gjbnh said:
Sorry, but I've flash my phone at least 5 times this week, and incorrectly identified the current rom. I need to flash to this one. My Bad
Click to expand...
Click to collapse
That happens
Let me know how you like the rom... and report if there are any bugs.
Your wish is my command (Offer void is most countries, Tuesdays, and full moons)
gjbnh said:
Your wish is my command (Offer void is most countries, Tuesdays, and full moons)
Click to expand...
Click to collapse
Well, it is Friday, in Miami with no moon at all
I've got it up and running this afternoon. Here's s couple of thoughts & questions:
#1) I couldn't get your included ROMUpdateUtility.exe to run on Vista. I just dropped the nbh file in a folder from another rom and it flashed fine. I may have had a corrupted download, but it all extracted fine.
#2) CM Internet Sharing and ICS Control, are these useful on a phone without wifi? I'm curious to know how they can be used.
#3) I'm an EzInput bigot. I still think you should add it
#4) You have a lot of config utils included. Not sure how easy it is to do when cooking, but you might want to throw those in the Tools folder in the start menu. I doubt 90% of users would touch those.
Good job, thanks for cooking these for us.
Is anyone else having marketplace problems in this build? Seems to be slower when running, and I've had several "server" errors..
gjbnh said:
Is anyone else having marketplace problems in this build? Seems to be slower when running, and I've had several "server" errors..
Click to expand...
Click to collapse
I am getting intermittent networking issues on Bell for the last 24hrs. I was blaming it on the ISP...maybe its a problem with 28230
I have been thinking of a side project i can start and since i recently acquired a wave and have a SGS myself it seems like a fun project. I found out that it has a hummingbird processor and may not be much difference from a Galaxy S in terms for hardware. Right now I'm just collecting as much information as i can about the device and what similarities the Wave has to a Samsung Galaxy S i9000.
So throw me what you got, its not an easy task and will need help, i have started another thread to see if i can get some Devs interested in this project and are willing to help in the android section
The idea is to port the Galaxy S i9000 firmware to the Wave that way you still have the samsung feel and since its made for the hummingbird processor. We will first need to see if we can get access to hardware and use that to inject code etc. This is in the research stage as of now.
THIS IS JUST A START AND MAY DIE BEFORE IT EVEN BEGINS. SO DON'T COMPLAIN WHY IT WAS STOPPED. I AM DOING THIS ONLY TO SEE IF I CAN DO IT AND NOTHING MORE.
If only i know C++ language, ican help you but i don't know. I'll follow and wait your results.
Keep going my friend. If you success (i hope) i will pay you to get the firmware!
thanx for starting this. i have visited forums where people are trying to port android on wave. And there biggest problem is bootloader. they cant dissemble it, just want to provide you this info. i will provide more info as soon as i get on any forums. This is the only way i can help, as i am only a application developer.
adfree is working on bootloader. Please, contact him.
@ jebise101
But you read this first?
http://forum.xda-developers.com/showthread.php?t=899535
I9000 stuff is available... but remember Baseband is Infineon... not Qualcomm...
Aplication Processor is identical...
Maybe more luck with Galaxy K M130K Firmware:
http://forum.xda-developers.com/showpost.php?p=12083886&postcount=7
But I can't find Firmware for M130K
Go find Firmware from M130K with BootFiles.
it says original firmware for M130K but not sure
pspmaster. tistory. com/48
looks like it is the firmware you wanted adfree
here is the link righ here easier http://pspmaster.tistory.com/48
use google chrome with this page as it is in korean
Well, if you google M130K-KIES, you can get the firmware via 4share, but the file it got was without the boot.bin :-(. But I'm not sure about the firmware from pspmaster.
whats with this project ?
http://www.androidport.net/
pawlakpl this site androidport.net never end this project becouse no money.
Here is an app someone created i will try it when i get home to see if if i can get it to download the Korean SGS firmware (use to use it all the time back when i had the O2, if anyohne wants to give it a shot feel free
http://www.modaco.com/content/i8000...41/samsung-mobile-firmware-queries-downloads/
cinimini said:
pawlakpl this site androidport.net never end this project becouse no money.
Click to expand...
Click to collapse
But XDA can end a project ?
I've downloaded M130K-HOME-REV04-EA29.tar
Thanx to hsingh56 and mylove90.
As I've searched several hours via Google with no success...
Now I have also Bootloader files from M130K... but looks totally different as I thought...
Anyway... I9000 and M130K have similar folders/files...
factoryfs.rfs.img
Rename into *.img like above. And extract with WinImage for instance...
Then use open eyes.
1.
Few Images are QMG... for PowerOFF QMG Animation...
2.
*.so files
3.
lib\hw
...s5pc110.so
But anyway. As long NOBODY try with JTAG (RIFF BOX) + Wave S8500 + knowledge different combinations. If Boot area is secured?
We will NEVER see Android on Wave...
Best Regards
So the wuestion is....
Whos have JTAG+S8500+Knowledge+Free time to help the bootloader creation?
Yes,boot and sbl is secured(e-fused)
cinimini said:
pawlakpl this site androidport.net never end this project becouse no money.
Click to expand...
Click to collapse
Euhmm. If you guys actually READ The site it shows we are working. Only we PROBALY need IDA. But we're in touch with Dopi from IDA. if things work out we will have the bootloader disassembled within 2 weeks and we can start testing the modified FW from the Galaxy S
ShadowAS1 said:
Euhmm. If you guys actually READ The site it shows we are working. Only we PROBALY need IDA. But we're in touch with Dopi from IDA. if things work out we will have the bootloader disassembled within 2 weeks and we can start testing the modified FW from the Galaxy S
Click to expand...
Click to collapse
Great news! Keep up the good work.
ShadowAS1 said:
Euhmm. If you guys actually READ The site it shows we are working. Only we PROBALY need IDA. But we're in touch with Dopi from IDA. if things work out we will have the bootloader disassembled within 2 weeks and we can start testing the modified FW from the Galaxy S
Click to expand...
Click to collapse
Please, STOP. I won't comment on that nonsense. Let me just say good riddance to you and come back with the results. We already had enough talking and it's time for you to show whether you can distinguish ARMv4, ARMv7, decrypted, encrypted executables and any basics of code signing.
great initiative...keep it up the work and never give up...
Friends, I have a Irulu AL101 SuperPAD Tablet (I assume it's a generic chinese knock off), and I'm looking for a copy of the firmware, or something compatable that I can have as a backup before I start trying ROM's on it.
It's rooted.
Attached is a screenshot of the system information so you can see the build number and such.
Any information would be helpful!
Thanks in advance!
How did you root you tab?
This PSA was sent Flow style from my Note 2 N-7100
it came out of the box with root access. where did you find roms and how do you flash them?
Compatibility packs for
bbradf44 said:
it came out of the box with root access. where did you find roms and how do you flash them?
Click to expand...
Click to collapse
I'm working on this issue as well.
I am looking for the compatibility pack for my device which is an Irulu AN101 and so far I am just working my way through this ROM thread right here to find the exact one. I don't know what is compatible as of yet so I am doing the hard research on this.
http://forum.xda-developers.com/showthread.php?t=1821398
Hopefully this link helps you. Let me know what you find if your still working this issue.
Link to Irulu.net for my device AN101 is here:
http://irulu.net/tablet-pc-accessory/tablet-pc/64123.html
Also found a link to your device AL101 on their site as well:
http://www.irulu.net/tablet-pc-accessory/tablet-pc/64126.html
Yours looks like it has a different processor than mine so I am assuming we need different compatibility packs.
The only thing I am missing is the compatibility pack for assurance that I don't brick my device. I have been following the device here (so far) on this great youtube video which may be applicable to your sitch as well. hopefully it helps.
http://youtu.be/ETFthBydHU0
Good luck as well.
Want to restore back to original rom, and have spent a good hour hunting, only to end up at either samobile who want to charge e15, or some other shady sites where y ou have to pay for access...
Is this just the way things are?
Anyone able to share this rom?
At https://www.sammobile.com/firmwares/galaxy-tab-pro/SM-T520/ I do not see anything telling me to pay.
If you actually select a rom, you see this below the file...
This archived firmware is only available for premium users.
Please click here to become premium.
Click to expand...
Click to collapse
Which sort of contradicts the info on the previous page:
Here you find all the latest firmwares for the GALAXY Tab PRO SM-T520, if you want to flash your device with the newest Samsung software. Before downloading, make sure your device has the exact model code SM-T520. You can download the most recent GALAXY Tab PRO firmwares for free, or check out our cheap but fast download options.
Click to expand...
Click to collapse
I know the firmware is old, but its still the latest!
Did you log in. I registered long time ago at sammobile to be able to download. That worked for about 8 years without paying anything, but downloadspeed is anoying low.
Ok, I just logged in and saw , you have to pay. Free firmware downloads for members are only for recent firmware. Cause we're far from recent, we have to pay for the archive files. F...k you Samsung.
As I said in another thread some years ago, this tablet was my last Samsung device I bought, due to their superior support.
Here's a link for the German (DBT) and the Dutch (PHN) stock firmware. I think the dutch one was newer, although there's probably not much of a difference.
https://drive.google.com/open?id=14Ryo43jjI2gcVGDINUJxV4GfMl3lDwDL
Here is a link to the US version:
https://drive.google.com/open?id=0B5076OsZGx-_MFh5QTRlQWpHems