Hi,
Just installed the stable CM 10.2 today, and I still cannot switch on bluetooth. When I select "ON" it stays grey for a while and then switches back to "OFF"
I am using a baseband of 5.1201.167.31, are other people having this problem?, is there a better radio version to use that will solve this problem?
Previously I have been using nightly 10.2 3/11/2013 version which worked perfectly
Thanks
try the rc release. Works fine for me
Sent from my Xperia Z Ultra using Tapatalk 2
SÜPERUSER said:
try the rc release. Works fine for me
Sent from my Xperia Z Ultra using Tapatalk 2
Click to expand...
Click to collapse
RC1, and all nightlies since 3rd November 2013 have had the same problem for me
I can confirm BT bug here in stable
duffieldcastle said:
RC1, and all nightlies since 3rd November 2013 have had the same problem for me
Click to expand...
Click to collapse
hmm works fine for me with the RC1
I've only had this bug so far when I was not running the stock CM kernel.
I am currently using the repacked xm kernel which gives me better battery life due to the cpu freq not getting stuck and bluetooth isn't working. It was working before, though.
Bluetooth is working fine here. CM 10.2.0 stable. Stock cm kernel.
Sent from my EndeavorU using XDA Premium 4 mobile app
athulele said:
Bluetooth is working fine here. CM 10.2.0 stable. Stock cm kernel.
Sent from my EndeavorU using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hi, assuming it is the kernel, I suppose that I just fastboot flash the boot.img contained in the CM10.2 download?
If that is the case then I am already using Stock CM10.2 Kernel
Thanks for the help
duffieldcastle said:
Hi, assuming it is the kernel, I suppose that I just fastboot flash the boot.img contained in the CM10.2 download?
If that is the case then I am already using Stock CM10.2 Kernel
Thanks for the help
Click to expand...
Click to collapse
Maybe fastboot erase cache will help...
Or
Maybe try a clean flash again? Including a /system wipe...
Sent from my EndeavorU using XDA Premium 4 mobile app
athulele said:
Maybe fastboot erase cache will help...
Or
Maybe try a clean flash again? Including a /system wipe...
Sent from my EndeavorU using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hi, I've upgraded to Hboot 1.72, full system wipe, and reinstalled CM10.2, and now it all works great
Thanks for the help:good:
Related
fix miui v4 video problems
here are ics kernels included in viper rom (chinese ota kernel) and tazz's rom (leak kernel) to be used in other sense ics roms.
I actually made these to work with miui v4 as those have garbled video.
Any other rom which needs kernel updated can use this without any problems.
All credits should go to nitsuj17, tazzpirate and microdroid. All I did was extract kernel and hardware drivers from their roms and make a kernel update pakage.
flashing these kernels will fix garbled video problem in miui. both f these have working wifi and data. tested. these will not wipe data but make a backup just in case.
there's no point of flashing these kernels for a viper user. but tazz user may flash viper kernel to fix occasional wifi drop issue
flash only one.!! either tazz's one or viper one
thanks. :good: :laugh:
new version added. people having problems can try flashing that
Any one still having problems with these kernels just flash this boot.img from 4ext recovery after flashing the kernel zip fie.
http://d-h.st/Yvd - boot.img
http://d-h.st/b0A - new repacked viper kernel
fen0m said:
What I had to do to get this to work:
Boot the newest miui 12 21 I think
Open 4ext recovery CONTROL app
Select flash boot image.
Flash the new viper kernel in op
Camera looks great and hd recording is good.
Video playback is working well
Hope this helps someone
Sent from my supercharged viper miui
Click to expand...
Click to collapse
feel free to hit thanks button if i helped.
Is it need to flash both files???wish to use with kamals miui..
Sent from my Incredible 2 using xda app-developers app
rijujeevan said:
Is it need to flash both files???wish to use with kamals miui..
Sent from my Incredible 2 using xda app-developers app
Click to expand...
Click to collapse
of course not just flash either viper or tazz one.
I recommend to use viper.
*Macrodroid
Thank you for your contribution!
TA4S
I'm familiar with Viper's kernel since I've used viper rom but how does it differ from the one Tazz used? Is it just the Viper one having the wifi fix or is there more? Better yet is there even a reason to use Tazz's over Viper's?
I flashed the viper kernel over Miui and it gets stuck at the white HTC screen. Anyone else?
Sent from my Nexus 7 using xda app-developers app
Me to. I'm using the miui version right before the newest one tho
Using 1130 build
Sent from my pac
fen0m said:
Me to. I'm using the miui version right before the newest one tho
Using 1130 build
Sent from my pac
Click to expand...
Click to collapse
Me to, but only because I couldn't get the newest one to boot.
Sent from my ADR6350 using xda app-developers app
thenaut said:
I flashed the viper kernel over Miui and it gets stuck at the white HTC screen. Anyone else?
Click to expand...
Click to collapse
In what build???
I'm using it in 2.21.21 without any issues.
But I couldn't check it on cdma though!!
Im on gsm. But that shouldn't matter anyway.
Sent from my HTC Incredible 2 using xda app-developers app
thenaut said:
Me to, but only because I couldn't get the newest one to boot.
Click to expand...
Click to collapse
Newer one added in miui op download it and flash viper kernel
Sent from my HTC Incredible 2 using xda app-developers app
blaqbird said:
I'm familiar with Viper's kernel since I've used viper rom but how does it differ from the one Tazz used? Is it just the Viper one having the wifi fix or is there more? Better yet is there even a reason to use Tazz's over Viper's?
Click to expand...
Click to collapse
I think only viper kernel has fixed WiFi drop issue. Tazz kernel hasn't fixed it. And tazz kernel has some graphic driver issues so some items doesn't render properly in some games.
Sent from my HTC Incredible 2 using xda app-developers app
Here's a screen shot of my miui 2.12.21 running viper kernel.
Sent from my HTC Incredible 2 using xda app-developers app
casseer15 said:
Here's a screen shot of my miui 2.12.21 running viper kernel.
Sent from my HTC Incredible 2 using xda app-developers app
Click to expand...
Click to collapse
updated****!!!!
please try and provide feedback
What I had to do to get this to work:
Boot the newest miui 12 21 I think
Open 4ext recovery CONTROL app
Select flash boot image.
Flash the new viper kernel in op
Camera looks great and hd recording is good.
Video playback is working well
Hope this helps someone
Sent from my supercharged viper miui
fen0m said:
What I had to do to get this to work:
Boot the newest miui 12 21 I think
Open 4ext recovery CONTROL app
Select flash boot image.
Flash the new viper kernel in op
Camera looks great and hd recording is good.
Video playback is working well
Hope this helps someone
Sent from my supercharged viper miui
Click to expand...
Click to collapse
Thanx.
I'll add this to op
Sent from my HTC Incredible 2 using xda app-developers app
Happy new Year Everyone
casseer15 said:
fix miui v4 video problems
here are ics kernels included in viper rom (chinese ota kernel) and tazz's rom (leak kernel) to be used in other sense ics roms.
I actually made these to work with miui v4 as those have garbled video.
Any other rom which needs kernel updated can use this without any problems.
All credits should go to nitsuj17, tazzpirate and microdroid. All I did was extract kernel and hardware drivers from their roms and make a kernel update pakage.
flashing these kernels will fix garbled video problem in miui. both f these have working wifi and data. tested. these will not wipe data but make a backup just in case.
there's no point of flashing these kernels for a viper user. but tazz user may flash viper kernel to fix occasional wifi drop issue
flash only one.!! either tazz's one or viper one
thanks. :good: :laugh:
new version added. people having problems can try flashing that
Any one still having problems with these kernels just flash this boot.img from 4ext recovery after flashing the kernel zip fie.
http://d-h.st/Yvd - boot.img
http://d-h.st/b0A - new repacked viper kernel
feel free to hit thanks button if i helped.
Click to expand...
Click to collapse
Had someone been tried any of these kernel on ArcticICSed for the HTC Droid Incredible 2 ROM, Please let me know!!
thanks! :fingers-crossed:
I tried viper kernel on tazz rom and it worked. So I think these kernels will work on any Rom as long as its a vivow, sense based ics rom.
Sent from my HTC Incredible 2 using xda app-developers app
casseer15 said:
I tried viper kernel on tazz rom and it worked. So I think these kernels will work on any Rom as long as its a vivow, sense based ics rom.
Sent from my HTC Incredible 2 using xda app-developers app
Click to expand...
Click to collapse
Using this on MIUI, good work. Now all I need is to stop the radio from disconnecting for a few seconds when WIFI connects and I will be 100% content, until I get the itch to flash again, that is. Thanks again
Sent from my HTC Incredible 2 using xda app-developers app
thenaut said:
Using this on MIUI, good work. Now all I need is to stop the radio from disconnecting for a few seconds when WIFI connects and I will be 100% content, until I get the itch to flash again, that is. Thanks again
Sent from my HTC Incredible 2 using xda app-developers app
Click to expand...
Click to collapse
you're welcome. glad i could help.
:good:
Just updated to jelly bean 4.1.1, sense+ stock.
I tried to flash cm10 nightly but it wont flash. Get stuck at quielty brillant
Any ideas?
Sent from my HTC One X using xda premium
Did u flash the boot.img b4 flashing the rom...!?? just flash boot.img and the problem would be solved
You need a special boot.img for newer hboots, search in the official thread.
And also note that gps won't work.
kskendsup said:
Did u flash the boot.img b4 flashing the rom...!?? just flash boot.img and the problem would be solved
Click to expand...
Click to collapse
Yea I did flash the boot.img for that rom
Sent from my HTC One X using xda premium
MeLViN-oNe said:
You need a special boot.img for newer hboots, search in the official thread.
And also note that gps won't work.
Click to expand...
Click to collapse
Ok thanks, ill have a look around for this special boot.img
Sent from my HTC One X using xda premium
ok, i've been trying to find the right boot.img but i can't. Can someone pleeease link me? thanks.
Link
TToivanen said:
Link
Click to expand...
Click to collapse
Thanks! Do i need to repack that with the stock cm10 boot.img?
Sent from my HTC One X using xda premium
If you want latest kernel changes, you should repack. However, some people have reported having problems booting with repacked boot img.
Try with repacked boot.img first and if you can't boot flash the modded boot as it is.
so I ended up just using the modded boot.mg as I didn't have time to repack and alas it wouldn't boot. So ill try repacking and see how that goes. Got to get back to cyanogen as the jb camera takes really crap indoor photos. Like they are extremely blurry.
TToivanen said:
If you want latest kernel changes, you should repack. However, some people have reported having problems booting with repacked boot img.
Try with repacked boot.img first and if you can't boot flash the modded boot as it is.
Click to expand...
Click to collapse
I tried both options and still can't get the nightly cm10 on my hox
Sent from my HTC One X using xda premium
TToivanen said:
Link
Click to expand...
Click to collapse
works GPS with this kernel.......cm10+hboot 1.36?
danielalonso said:
works GPS with this kernel.......cm10+hboot 1.36?
Click to expand...
Click to collapse
No. Try Trip's CM10.1 or Icecoldjelly 4.2.1, they have GPS working on high hboots.
TToivanen said:
No. Try Trip's CM10.1 or Icecoldjelly 4.2.1, they have GPS working on high hboots.
Click to expand...
Click to collapse
thanks
danielalonso said:
thanks
Click to expand...
Click to collapse
Did you get any to work?
Sent from my HTC One X using xda premium
Please I've been searching and searching and trying kernels but nothing I do can get cm10 to work....
Could someone pleas give me a details repsonse on how to get the cm10 nightlies to work on hboot 1.36.0000???
Sent from my HTC One X using xda premium
If you want it to work with gps, forget it. There's no way.
Without gps, flash the boot from post 9308 at cm10 thread.
If you can't boot, you're doing something wrong.
Sent from my HTC One X using xda app-developers app
Thanks TToivanen
Don't give a sh*t about gps as mine has been broken for ages. And I have no idea why either... Even before the 1.xx.xxxx version was updated. Actually I think my gps only worked for like 1 - 2 months of having the phone. I'll try that boot.img thanks mate.
TToivanen said:
If you want it to work with gps, forget it. There's no way.
Without gps, flash the boot from post 9308 at cm10 thread.
If you can't boot, you're doing something wrong.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Finally have cm10 running again. Thank you !!
Sent from my HTC One X using xda premium
You're welcome!
CASE CLOSED
Sent from my One X
I updated my HTC One V to an Unoffical version of CM10 ( Cyanogenmod ). An Official version isn't available yet. I had to:
Unlock the bootloader
Install twrp recovery
Root the phone
Boot into recovery and make a backup then wipe the phone.
Install cm10.zip
My first attempt failed because I didn;t realise you had to flash a custom kernel that supports CM10.I flahed the latest HELLBOY kernel:
boot-HELLBOY-CM10-201302142348.img
Success. I then installed the Google Jelly Bean apps & it was all good.
I've since realised thee is a later version ( 10.1 ) for my phone:
cm-10.1-20130217-UNOFFICIAL-primou.zip
Definately right for may phone as the CM10 that works was also for primou.
Now I boot into recovery & wipe the phone as before
Then install cm-10.1-20130217-UNOFFICIAL-primou.zip
Reboot phone
"HTC it's brilliant" splash screen appears and then nothing. With the working CM10 I get a Cyanogenmod boot animation.
I've restored the phone back to the working CM10 so not bricked.
Can anyone tell me where I'm going wrong ? I looked for a later HELLBOY kernel that supports 10.1 but couldn't find one.
Any rom based on Android 4.2.1 for primo u is not at all stable at this time.... Infact, it doesn't even boot.... So, stick with 4.1 for now...
rohov said:
Any rom based on Android 4.2.2 for primo u is not at all stable at this time....
Click to expand...
Click to collapse
FTFY
Sent from my One V
This Rom does boot. You can either try Maxwen's 4.2 kernel or you can extract boot from the zip. But primou version does not have gsm components working so you can't receive our make calls.
Sent from my One V using xda app-developers app
收件人: cm10.1 boot problem
Where did you download cm - 10.1-20130217 - UNOFFICIAL - primou.zip?could you tell me?
Sent from my HTC T320e using xda premium
Ruling said:
Where did you download cm - 10.1-20130217 - UNOFFICIAL - primou.zip?could you tell me?
Sent from my HTC T320e using xda premium
Click to expand...
Click to collapse
its available via goo manager....dont try it....doesnt even boot
收件人: cm10.1 boot problem
thanks. maybe you can try pac's boot.img
Sent from my HTC T320e using xda premium
Ruling said:
thanks. maybe you can try pac's boot.img
Sent from my HTC T320e using xda premium
Click to expand...
Click to collapse
No kernel is working at dis time... Dats y no rom is booting....
rohov said:
No kernel is working at dis time... Dats y no rom is booting....
Click to expand...
Click to collapse
CM 10.1 does boot with Max's 4.2 kernel. Though as I said, it does not have GSM components active. Still everything else works.
收件人: cm10.1 boot problem
Abhishek.chaurasia said:
CM 10.1 does boot with Max's 4.2 kernel. Though as I said, it does not have GSM components active. Still everything else works.
Click to expand...
Click to collapse
yesterday i booted.use hellboy 20130215
cm10
Sent from my HTC T320e using xda premium
Just wanted to kno.... The dev of cm10.1 is fixing it...??? And why he didnt posted it on xda and only on goomanager....????
rohov said:
Just wanted to kno.... The dev of cm10.1 is fixing it...??? And why he didnt posted it on xda and only on goomanager....????
Click to expand...
Click to collapse
the rom is not booting so no need to post it on the foums
Sabbit said:
the rom is not booting so no need to post it on the foums
Click to expand...
Click to collapse
Someone here said it is booting, just data isn't enabling... I doubt that though
Sent from my One V
Sabbit said:
the rom is not booting so no need to post it on the foums
Click to expand...
Click to collapse
But people said its booting..... Just gsm components are not there....also, codefireX, pacman ar also not booting....but they are here....
CM 10.1
rohov said:
But people said its booting..... Just gsm components are not there....also, codefireX, pacman ar also not booting....but they are here....
Click to expand...
Click to collapse
It's for Rukin to answer . Here's a screenshot.
Abhishek.chaurasia said:
It's for Rukin to answer . Here's a screenshot.
Click to expand...
Click to collapse
Even i have flashed it.. was booting fine with Max's kernel. But there was no network.
This ROM was not even out for using. Lloir did not even mentioned it was ready to use, it just exists in goo.im
Latest working is CM10 10/1/13
i m using this awesome kernel(turbo kernel v3.1 jb)
but as i come through.
there is a little bug. i mean no disgrace to the developer,
but i might want to add.
the microphone didnot work well. (wechat & talking tomcat cannot detect surrounding sound)
some earphone cannot be detect.
cannot video call(tango and skype).
other are perfect.=)
i just want to know it if this kernel bug or i do it wrong in flashing or set thing up?
The same thing happens sometimes with lupus kernel and I need to restart the phone. Not sure if it kernel, rom or hardware problem :/
iFlasher said:
The same thing happens sometimes with lupus kernel and I need to restart the phone. Not sure if it kernel, rom or hardware problem :/
Click to expand...
Click to collapse
it is JB kernel bug.
i am back to ICS. everything still perfect.
blackbox92 said:
it is JB kernel bug.
i am back to ICS. everything still perfect.
Click to expand...
Click to collapse
Hi sir i am noob. i am xperia play r800i what kernel and rom are you using?
Please give me some advise and thank you for immediate response.
chrisean26 said:
Hi sir i am noob. i am xperia play r800i what kernel and rom are you using?
Please give me some advise and thank you for immediate response.
Click to expand...
Click to collapse
i m using doomlord kenerl+ics express rom ics.run great.
if u using JB, it eyecandy but got a lot bug.
blackbox92 said:
i m using doomlord kenerl+ics express rom ics.run great.
if u using JB, it eyecandy but got a lot bug.
Click to expand...
Click to collapse
That's a ROM bug then. Go with SlimJB, been using it for months and its perfect.
Sent from my unlocked R800x using XDA Premium
DubleJayJ said:
That's a ROM bug then. Go with SlimJB, been using it for months and its perfect.
Sent from my unlocked R800x using XDA Premium
Click to expand...
Click to collapse
I running slimbean on 2nd slot, still the bug persist,
Can u make video call with slimbean? And play talking tom cat well?
Sent from my R800i using xda app-developers app
blackbox92 said:
I running slimbean on 2nd slot, still the bug persist,
Can u make video call with slimbean? And play talking tom cat well?
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
Might be the fact it's on your second slot. I don't have those issues, so it could be that.
Well, I've actually had a video conversation on Skype on PAC Rom + turbo kernel 3.1 without any issue. Rom is in internal memory(1st slot).
I don't know about other issues mentioned as I'm only using microphone for Skype (rarely) and obviously I'm using it in-call
Sent from my R800i using xda premium
Ok, but it seem I could not find the answer why I got this problem, mine was pacman rom 1st slot, and slim bean 2nd slot, kernel turbo kernel v3.1 zeus.
Sent from my R800i using xda app-developers app
blackbox92 said:
Ok, but it seem I could not find the answer why I got this problem, mine was pacman rom 1st slot, and slim bean 2nd slot, kernel turbo kernel v3.1 zeus.
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
its definitely not a Turbo Kernel BUg.. cuz am using it v3.1 on AOKP JB 4.1.2
and trust me.. its the BeST JB ROM .. the most stable we gonna have...
Read my Post here.. d one with screenshots.
http://forum.xda-developers.com/showthread.php?t=1852529&page=48
saqibkhan said:
its definitely not a Turbo Kernel BUg.. cuz am using it v3.1 on AOKP JB 4.1.2
and trust me.. its the BeST JB ROM .. the most stable we gonna have...
Read my Post here.. d one with screenshots.
http://forum.xda-developers.com/showthread.php?t=1852529&page=48
Click to expand...
Click to collapse
can u try webcam with phone using this kernel?
also try webcam with ur front camera, i m using tango and skype.
Can anyone know a solution pls.
I am unable to multiboot two or more then two roms on this kernel,
no matter which Rom GB or ICS or Jb it doesn't work. It's a kernel issue or something else.
I am using multiboot aware roms only.
Thanks
Sent from my R800i using xda premium
ehmafia said:
Can anyone know a solution pls.
I am unable to multiboot two or more then two roms on this kernel,
no matter which Rom GB or ICS or Jb it doesn't work. It's a kernel issue or something else.
I am using multiboot aware roms only.
Thanks
Sent from my R800i using xda premium
Click to expand...
Click to collapse
download a new one of the rom(make sure it multiboot aware). and make sure the size of the zip is correct (something u will get a corrupt zip).
u should make a clean install,flash back phoenix vendor ftf. boot up. flash turbo v3.1 kernel back .wipe data,cache, system. and flash the rom again.
because there is no non such issue.
blackbox92 said:
download a new one of the rom(make sure it multiboot aware). and make sure the size of the zip is correct (something u will get a corrupt zip).
u should make a clean install,flash back phoenix vendor ftf. boot up. flash turbo v3.1 kernel back .wipe data,cache, system. and flash the rom again.
because there is no non such issue.
Click to expand...
Click to collapse
ehmafia said:
Can anyone know a solution pls.
I am unable to multiboot two or more then two roms on this kernel,
no matter which Rom GB or ICS or Jb it doesn't work. It's a kernel issue or something else.
I am using multiboot aware roms only.
Thanks
Sent from my R800i using xda premium
Click to expand...
Click to collapse
For every boot slot.. u need to set manually to GB ICS OR JB.. are you doing that ??
Yeah, I have done that (downloading new roms and the kernel again) and now the Rom (gb or ics any) in the first slot is working. But in the 2nd slot none of the roms worked. I read the multiboot kernel guide also.
Any idea for working rom in the 2nd slot.
Thanks
Sent from my R800i using xda premium
What is 1st slot rom and 2nd slot rom? And tell me how did u install 2nd rom? What kernel u using(version) ? Did u flash the Phoenix vendor ftf?
Sent from my R800i using xda app-developers app
First of all I flashed the phoenix vendor ftf file then booted my phone and after successfully booting it to stock gb I shut it off.
Then I have flashed the turbo kernel v3.1 and then went to recovery and wiped data, cache, dalvik cache and flashed the ics Rom (zip already present in sd card) in slot 1. Then rebooted and successfully booted to ics.
Then I again rebooted to recovery and created slot 2 for gb rom with more system & user data space. And wiped data, cache & dalvik cache. And flashed auroraplay rom and restarted BUT ON RESTARTING THE PHONE FREEZES at the boot. I have also waited about 15mins but no luck.
Details -
Recovery - turbo kernel v3.1
Slot 1 - ICS Rom
Slot 2 - GB Rom
SD Card - Class 4
Has anybody else got a problem like this.
BTW thanks again everyone for the help.
Sent from my R800i using xda premium
ehmafia said:
First of all I flashed the phoenix vendor ftf file then booted my phone and after successfully booting it to stock gb I shut it off.
Then I have flashed the turbo kernel v3.1 and then went to recovery and wiped data, cache, dalvik cache and flashed the ics Rom (zip already present in sd card) in slot 1. Then rebooted and successfully booted to ics.
Then I again rebooted to recovery and created slot 2 for gb rom with more system & user data space. And wiped data, cache & dalvik cache. And flashed auroraplay rom and restarted BUT ON RESTARTING THE PHONE FREEZES at the boot. I have also waited about 15mins but no luck.
Details -
Recovery - turbo kernel v3.1
Slot 1 - ICS Rom
Slot 2 - GB Rom
SD Card - Class 4
Has anybody else got a problem like this.
BTW thanks again everyone for the help.
Sent from my R800i using xda premium
Click to expand...
Click to collapse
Other than aurora gb rom. Did u try flash others rom?
Sent from my R800i using xda app-developers app
Guys I'm using the latest build of omnirom 4.4.1 the 26.12 build and I was just wondering is there a somewhat stable enough kernel that is compatible with it yet?
Sent from my SGH-I317 using xda app-developers app
Give this one a try,
http://forum.xda-developers.com/showthread.php?t=2239453
I haven't flashed it, but I will do it later today.
aradhaya10 said:
Guys I'm using the latest build of omnirom 4.4.1 the 26.12 build and I was just wondering is there a somewhat stable enough kernel that is compatible with it yet?
Sent from my SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
The cm 11 kernels should work fine. Pretty much any aosp kernel based on 4.4 will work.
Sent from my phone
Thanks I will give devil kernel a try.
Sent from my SGH-I317 using xda app-developers app
210euser said:
The cm 11 kernels should work fine. Pretty much any aosp kernel based on 4.4 will work.
Sent from my phone
Click to expand...
Click to collapse
Actually they have been some issues with some of the AOSP roms. example I tried to flash Devil on SlimKat a week back and it got stuck on a boot loop. As per the kernel dev it was due to each rom using different initramfs.
http://forum.xda-developers.com/showpost.php?p=47826836&postcount=178
jibust said:
Actually they have been some issues with some of the AOSP roms. example I tried to flash Devil on SlimKat a week back and it got stuck on a boot loop. As per the kernel dev it was due to each rom using different initramfs.
http://forum.xda-developers.com/showpost.php?p=47826836&postcount=178
Click to expand...
Click to collapse
This ^^^^..
The devs are working the kernels pretty hard right now...and I'm sure that devil kernel will be 4.4 capable before long...
We are just well ahead of the curve on 4.4...and devs need time to catch up on all of the extra mods....g
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
jibust said:
Actually they have been some issues with some of the AOSP roms. example I tried to flash Devil on SlimKat a week back and it got stuck on a boot loop. As per the kernel dev it was due to each rom using different initramfs.
http://forum.xda-developers.com/showpost.php?p=47826836&postcount=178
Click to expand...
Click to collapse
This is true. Hopefully most aosp rom should be built to boot the same.
Sent from my phone
Alright so might as well wait for the appropriate launch of a compatible kernel, thanks a lot guys
Sent from my SGH-I317 using xda app-developers app