Related
Hello all, I was wondering if anyone can point me in the right direction. I have a acer iconia a100 rooted and currently running the carbon rom (4.2.2) and twrp recovery (2.6.3.0). I would like to go back to stock rom (ICS). I have not changed any kernals or anything like that. Can I just restore my nandroid backup of my stock rom or is there something specific I have to do? Also, I just looked and I dont have a stock backup with twrp, only with cwm. When I unlocked bootloader, I installed cwm, then must have done a backup of stock rom, then flashed carbon rom, then switched to twrp and made another backup so I would have to go back to cwm to restore nandroid. How do I go back to cwm from twrp?? Thanks for the feedback.
I looked in my internal storage and it looks like I have 2 zips, fastbootrecovery.zip and xsposeddisabler-cwm.zip, do I flash one of these?? and if I do, can I do it with es explorer?? Thanks
jreink01 said:
Hello all, I was wondering if anyone can point me in the right direction. I have a acer iconia a100 rooted and currently running the carbon rom (4.2.2) and twrp recovery (2.6.3.0). I would like to go back to stock rom (ICS). I have not changed any kernals or anything like that. Can I just restore my nandroid backup of my stock rom or is there something specific I have to do? Also, I just looked and I dont have a stock backup with twrp, only with cwm. When I unlocked bootloader, I installed cwm, then must have done a backup of stock rom, then flashed carbon rom, then switched to twrp and made another backup so I would have to go back to cwm to restore nandroid. How do I go back to cwm from twrp?? Thanks for the feedback.
I looked in my internal storage and it looks like I have 2 zips, fastbootrecovery.zip and xsposeddisabler-cwm.zip, do I flash one of these?? and if I do, can I do it with es explorer?? Thanks
Click to expand...
Click to collapse
Just the stock ROM or completely back to stock, 100%?
If you don't know what those zips are, or how to use them, then don't use them, period.
To get back cwm you can use fastboot to flash it back on or use one of the cwm installers in development, if any are still there, if you want to do it with fastboot you'll need some stuff to get ready, most of it should be there from when you rooted the first time, then a couple lines in a command prompt and you'll have it back. There's also stock rooted ICS ROMs available, so depending on what you want we can go from there.
Tapatalked from my HTC DNA - Akakaze
pio_masaki said:
Just the stock ROM or completely back to stock, 100%?
If you don't know what those zips are, or how to use them, then don't use them, period.
To get back cwm you can use fastboot to flash it back on or use one of the cwm installers in development, if any are still there, if you want to do it with fastboot you'll need some stuff to get ready, most of it should be there from when you rooted the first time, then a couple lines in a command prompt and you'll have it back. There's also stock rooted ICS ROMs available, so depending on what you want we can go from
I am going to sell my tablet so I would like to go to my backup of my stock rom. When I restore my stock backup, I can just do a full wipe, that will get me back to the starting point of just the basic rom, right?? That will wipe all my data from the backup rom, or will a full wipe erase the rom too?? I want to get back to the basic rom (just like if I install a new rom) have to set up accounts, wifi, etc).
Also, is there a tutorial or a step by step guide to reinstall cwm back on my tablet, since my stock rom was backed up with cwm? And where do I have the files to reflash cwm. Thanks for your assistance in helping me return my tablet to the state I want.
Click to expand...
Click to collapse
I found a site that has it step by step, installing cwm. Here it is.
Here it is guys, Stock CWM Recovery for the ACER A100.
Before anything make sure you have the latest ICS leak C/O Vache, Root, and Unlocked Bootloader.
Official ICS Leak c/o Vache:
http://forum.xda-developers.com/show....php?t=1510706
Root Instructions here:
http://forum.xda-developers.com/show....php?t=1531646
Unlock your bootloader for fastboot, follow here:
http://forum.xda-developers.com/show....php?t=1557445
once you have done all of the above, you should be ready to flash this recovery. Make sure you have ADB up and working properly. And place the recovery.img in your working folder (see below)
1- Open a command prompt in your working folder (usually in your platform tools, mine is C:\android-sdk-windows\platform-tools) make sure you are administrator.
2- Connect Tablet to pc and get excited.
3- Type: adb devices (verify your Tab is connected and listed)
4- Type: adb reboot bootloader
5- Once bootloader is in fastboot type: fastboot flash recovery recovery.img
You will see writing recovery, flashing recovery, etc.
6- Once flashed Type: fastboot reboot
7- Profit
But it says make sure you have the latest ics leak?? Are they refferring to the rom?? If so, I currently have carbon rom istalled which is jellybean. This will not work then?? I am a little confused and any feedback would be greatly appreciated.
jreink01 said:
I found a site that has it step by step, installing cwm. Here it is.
Here it is guys, Stock CWM Recovery for the ACER A100.
Before anything make sure you have the latest ICS leak C/O Vache, Root, and Unlocked Bootloader.
Official ICS Leak c/o Vache:
http://forum.xda-developers.com/show....php?t=1510706
Root Instructions here:
http://forum.xda-developers.com/show....php?t=1531646
Unlock your bootloader for fastboot, follow here:
http://forum.xda-developers.com/show....php?t=1557445
once you have done all of the above, you should be ready to flash this recovery. Make sure you have ADB up and working properly. And place the recovery.img in your working folder (see below)
1- Open a command prompt in your working folder (usually in your platform tools, mine is C:\android-sdk-windows\platform-tools) make sure you are administrator.
2- Connect Tablet to pc and get excited.
3- Type: adb devices (verify your Tab is connected and listed)
4- Type: adb reboot bootloader
5- Once bootloader is in fastboot type: fastboot flash recovery recovery.img
You will see writing recovery, flashing recovery, etc.
6- Once flashed Type: fastboot reboot
7- Profit
But it says make sure you have the latest ics leak?? Are they refferring to the rom?? If so, I currently have carbon rom istalled which is jellybean. This will not work then?? I am a little confused and any feedback would be greatly appreciated.
Click to expand...
Click to collapse
Does anyone have any suggestions?? Thanks
Well, before the tab got official ICS, we had a leak. If you had read down the topics some you would've found it. You do not want cwm, you want twrp.
Sent from my SPH-L710 using xda app-developers app
das_webos_transformer said:
Well, before the tab got official ICS, we had a leak. If you had read down the topics some you would've found it. You do not want cwm, you want twrp.
Does anyone have any suggestions on whether it is ok to do this? Thanks
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
I need cwm to restore my stock rom. If I use the steps quoted below to reinstall cwm, will I run into any problems since I'm coing from carbon rom (jellybean) to stock rom which is (ICS)?
jreink01 said:
I need cwm to restore my stock rom. If I use the steps quoted below to reinstall cwm, will I run into any problems since I'm coing from carbon rom (jellybean) to stock rom which is (ICS)?
Click to expand...
Click to collapse
Does anyone know if this how to guide is good to use when coming from carbon rom (jellybean) to stock rom (ics))? Thanks
jreink01 said:
Does anyone know if this how to guide is good to use when coming from carbon rom (jellybean) to stock rom (ics))? Thanks
Click to expand...
Click to collapse
To just go back to stock to sell it you'll run into a couple issues coming from 4.2+, namely the storage path changes, you'll retain the /0 folders, however many were made. Otherwise following the guide that roman made will work to go back to 100% stock, I'll see if I can get a link, I'm in a waiting room with crappy data lol
Edit:
That guide will work for installing cwm, basically get your cwm image then get fastboot going, fastboot flash recovery cwmimageyougot.IMG
http://forum.xda-developers.com/showthread.php?p=33574648
Best way to return to 100% stock. No need to fuss with recoveries just install what he says then the ROM does the rest. While in twrp remember to go delete /0 directories or they'll remain there forever. Or until its deleted at a later date, but if you have stuff in there you should do it prior to going fully stock again.
Tapatalked from my HTC DNA - Akakaze
pio_masaki said:
To just go back to stock to sell it you'll run into a couple issues coming from 4.2+, namely the storage path changes, you'll retain the /0 folders, however many were made. Otherwise following the guide that roman made will work to go back to 100% stock, I'll see if I can get a link, I'm in a waiting room with crappy data lol
Edit:
That guide will work for installing cwm, basically get your cwm image then get fastboot going, fastboot flash recovery cwmimageyougot.IMG
http://forum.xda-developers.com/showthread.php?p=33574648
Best way to return to 100% stock. No need to fuss with recoveries just install what he says then the ROM does the rest. While in twrp remember to go delete /0 directories or they'll remain there forever. Or until its deleted at a later date, but if you have stuff in there you should do it prior to going fully stock again.
Tapatalked from my HTC DNA - Akakaze
Click to expand...
Click to collapse
Thanks for the response, youve fully confused me with the /0 folders?? What exactly is that?? When I go to es file explorer, I see sdcard0 (which looks like the internal storage) and sd01 which looks like my ext sd card. Is it one of those your are talking about??
Also, you said something about go delete in twrp, I went into twrp and did not find anything with that name?? am I deleteing something in twrp. Could you spell it out for me since I am a noob when it comes to reverting a device to stock. Thanks for taking the time to explain this.
jreink01 said:
Thanks for the response, youve fully confused me with the /0 folders?? What exactly is that?? When I go to es file explorer, I see sdcard0 (which looks like the internal storage) and sd01 which looks like my ext sd card. Is it one of those your are talking about??
Also, you said something about go delete in twrp, I went into twrp and did not find anything with that name?? am I deleteing something in twrp. Could you spell it out for me since I am a noob when it comes to reverting a device to stock. Thanks for taking the time to explain this.
Click to expand...
Click to collapse
that is something happening with cwm. i had this problem. it keeps creating a folder names 0 and keep moving old files into that whenever you install a new rom.
Hello guys. I need your feedback. I have a A100 that is rooted and is currently running carbon rom 4.2. I am going to be selling this in the next couple weeks because I just don't use it anymore now that I have a second pc.Do you think it would be more advantagious to sell this just the way it is (rooted and custom rom) or should I take it back to completely stock? Or if it is more advantagious to sell it with a custom rom, which rom would you guys suggest?? Thanks again for any and all suggestions.
Please Help!! I was trying to go to stock ics and these are the steps I used.The simple method to revert back to stock ICS from a custom ROM on an A100.
+++Locked bootloader, no custom recovery, no root. Full stock .014 rom. It will recieve OTA updates to latest Acer version.+++
Get Ready
1) Download this flashable Stock recovery zip, and place in your normal flashing location, - Thx 4 help pio
http://db.tt/VLmnMCzq
Also uploaded below
2) Download the Official .014 Stock ICS rom
The stock ICS zip from zeronull. http://forum.xda-developers.com/show....php?t=1611696
Here is a second link to it. http://ubuntuone.com/7DZtbNqZzOk7qsaQxNk99a - thx zleto
3) Rename the Stock ICS rom to "update.zip", no quotes (make sure you have "hide known file extensions" UNCHECKED, in the folder options). And place it on the root of your microSD card. This will allow you to see the file extension to verify that it is named properly.
Get it Done
1) Flash the Stock recovery zip with your custom recovery. Then wipe cache, davlik cache, and wipe data/factory reset.
2) Reboot to system.
3) Allow it to sit for 5 minutes or so.
4) Then Power off.
5) Update from the microSD card by holding down the power and volume rocker closest to the corner at the same time, until you see "erasing cache .".. ect, ect. The stock rom install should start by itself, dont touch anything, wait for it to reboot.
****** If it won't boot do a factory reset (with the hardware buttons, see below) and/or try to reflash the ics rom one more time. ******
Quote:
To perform a Factory Data Reset use the following steps:
1.Place the rotation lock switch in the up position (tablet held in portrait). Or to the left if held in landscape.
2.Press and hold the Volume down button, which is located farthest from the corner (it is volume up, if held in landscape).
3.With the Volume down button held, press and hold the Power button for 3 seconds then release it. Continue holding the Volume down button.
4.Once the tablet vibrates, switch the rotation lock on and off repeatedly while still holding the Volume down button.
5.Release the Volume down button and stop switching the rotation lock once the "Erasing Userdata..." message appears in the upper left corner of the screen
Now I get the android symbol with the red triangle, that stays for about a minute, then it reboots and stays on thye acer screen. When I did the steps and was going to reboot, I received a waring while in recovery sayiny that I dont have a op installed. I did it anyway, as posted and now I'm stuck, can anyone PLEASE help me.I tried doing a reset with steps 2 though 4 but while pressing the vol up and letting go of the power button, it does not vibrate.
I try to boot into recovery with vol up + power, it boots than says erasing cache, then booting into recovery, the the android synbol comes up with the red triangle.
I can't even get into recovery. It says bootloader (unlock mode) when I pwer it on. If I press power + vol up, it says erasing cache, then booting into recovery kernal, then the android symbol comes up with the red triangle.Thanks for responding and since this is the wrong thread, can we discuss this in the other thread?? While I was typing this, the android symbol with the triangle was on the screen for about 2 minutes, then it just rebooted and now its saying acer acer acer acer acer on the bottom of the screen.
Can anyone help me out with this please?
I'm a newbie and I am in trouble. I have a rooted Nexus 7 2013 and I have a TWRP Nandroid backup which I had copied to my WIndows PC.
Now my Nexus 7 crashed and won't go beyond the X on bootup. The Nandroid and Titanium backups are on my windows PC.
How do I restore the Nexus 7 to working status by restoring from the Nandroid backup and data I have copied to the PC?
Please help. Thanks.
Guys, someone please help.
I don't know how to get out of this mess. I'm still stuck on X.
I can power off the Nexus 7 and power to the recovery screen where I find Teamwin's menu.
I restored (several times) the nandroid backups I found on this menu (they were all done after the last reset) but rebooting then just gets me back to the X screen and no further.
I have a good nandroid backup on my PC but no way to get it into the tablet so TWRP can restore from it. Is there a way to transfer a file to or from the tablet when it will not boot completely?
The advanced screen of the Teamwin recovery menu lets me access a file manager. Is there any way I can use it to move files on or off the tablet to "anything" else?
The last time the boot froze on the X screen, I was able to go to the recovery screen with the android on his back and an X and from there to a reset. But this time I cannot get there and the recovery screen gets me to the Teamwin recovery menu. This has a wipe option. Will this reset the Nexus if selected. Will it remove root? I don't want to go through rooting it all over again.
Essentially I just want to do 2 things:
a) extract data from the stuck Nexus 7
b) reset and restore the nandroid backup I have on my pc.
Please help.......
Bill235 said:
Guys, someone please help.
I don't know how to get out of this mess. I'm still stuck on X.
I can power off the Nexus 7 and power to the recovery screen where I find Teamwin's menu.
I restored (several times) the nandroid backups I found on this menu (they were all done after the last reset) but rebooting then just gets me back to the X screen and no further.
I have a good nandroid backup on my PC but no way to get it into the tablet so TWRP can restore from it. Is there a way to transfer a file to or from the tablet when it will not boot completely?
The advanced screen of the Teamwin recovery menu lets me access a file manager. Is there any way I can use it to move files on or off the tablet to "anything" else?
The last time the boot froze on the X screen, I was able to go to the recovery screen with the android on his back and an X and from there to a reset. But this time I cannot get there and the recovery screen gets me to the Teamwin recovery menu. This has a wipe option. Will this reset the Nexus if selected. Will it remove root? I don't want to go through rooting it all over again.
Essentially I just want to do 2 things:
a) extract data from the stuck Nexus 7
b) reset and restore the nandroid backup I have on my pc.
Please help.......
Click to expand...
Click to collapse
Just choose the wipe option in twrp.
That should allow you to start android.
Then copy your backup from PC to virtual sdcard, reboot to twrp, and restore.
You can copy files while in recovery but it is more involved so I would try this first.
sfhub said:
Just choose the wipe option in twrp.
That should allow you to start android.
Then copy your backup from PC to virtual sdcard, reboot to twrp, and restore.
You can copy files while in recovery but it is more involved so I would try this first.
Click to expand...
Click to collapse
But will it remove the root I worked so hard to get?
If you worked hard to get root on a Nexus device you did something wrong. It should be as simple as unlocking the bootloader (already done), flashing a custom recovery (already done), and flashing the SuperSU ZIP file (this is the only step you'd need to repeat).
That said, doing a factory reset should not remove root. Even if it does, it would be restored when you restored your rooted Nandroid.
raptir said:
If you worked hard to get root on a Nexus device you did something wrong. It should be as simple as unlocking the bootloader (already done), flashing a custom recovery (already done), and flashing the SuperSU ZIP file (this is the only step you'd need to repeat).
That said, doing a factory reset should not remove root. Even if it does, it would be restored when you restored your rooted Nandroid.
Click to expand...
Click to collapse
Easy for an expert. I'm a newbie. I used the WUGfresh toolkit and it took multiple frustratng attempts and forever for it to finally download the correct adb drivers that would recognize the Nexus 7. Then all went smoothly.
But back to the present. I'm all fine now (till the next time the Nexus 7 crashes on me). For other newbies like me who run into this problem and need simple instructions here is what I did.
The first time this crash with the boot stuck on the X screen happened, going to the recovery screen (Power button + Volume up simultaneously) showed me the android on his back with a red triangle. Pressing power button and briefly volume up gave me the option to reset the tablet without removing root. Because I was traveling and did not have my TWRP backups with me (they were on my laptop 1,000 miles away) this removed all my data and I had to re-install all my apps and everything again.
The second time this happened, the recovery screen took me to the TWRP recovery screen. TWRP recovery had apparently survived the crash. I needed to save my data before reseting the tablet again. By trial and error I discovered that the TWRP menu has under the Advanced Tab a file manager. also discovered that if you connect a flash device to the tablet's usb port the TWRP file manager could read and write to it (!!!) in a folder called usb-otg (but not to my windows laptop). I copied what I wanted to save to the flash drive. Then I used the "wipe" tool to return the tablet to android.
I installed a free app, Recovery Manager, to reinstall TWRP recovery. Copied my previous TWRP nandroid backup to the tablet and restored everything as it was.
Easy as pie if you know how. I hope this helps some other befuddled user.
sfhub and raptir: Do you know what can be done to prevent this from happening again? Could Google Play being conected to in Europe after it was used to being to conected to in the US cause the problem? Both times the crashes happened shortly after I used the tablet in Europe and the the second time after I used it for the first time in the US.
Bill235 said:
sfhub and raptir: Do you know what can be done to prevent this from happening again? Could Google Play being conected to in Europe after it was used to being to conected to in the US cause the problem? Both times the crashes happened shortly after I used the tablet in Europe and the the second time after I used it for the first time in the US.
Click to expand...
Click to collapse
I can't say for sure what is happening in your case, but in my experience getting stuck on X means your user data got corrupted. The cases I've seen fall into 2 categories:
1) faulty EMMC flash memory. Sometimes if you wipe a couple of times the bad blocks get locked out and you don't see the problem anymore. Other times, they keep coming back. In the latter case, return/exchange/rma the unit
2) android crashes (random reboot) and unfinished writes are not completed corrupting the user data. They put in code in the latest ROM to mitigate this so if you think you are suffering from this type of corruption, install the latest ROM if you haven't done so already.
Thank you for the excellent and clear reply. I'll hope the 2 wipes I did may have gotten rid of my bad blocks.
I'll update to the latest stock rom too.
Thank you.
Bill235 said:
Thank you for the excellent and clear reply. I'll hope the 2 wipes I did may have gotten rid of my bad blocks.
I'll update to the latest stock rom too.
Thank you.
Click to expand...
Click to collapse
The updating part got me in trouble.......
I accepted the system update and am now running android 4.3 but lost root.
So I went back to the WUGfresh Nexus Root kit. Updated everything, am now on version 1.7.3 of the toolkit, followed all the instructions (uninstalled and re-installed driveers) and got stuck on the same problem I had the first time I tried rooting: the adb : step3 of the full driver test. adb device not found .
I did reboot twice, am using the oem asus cable, etc. What a pain!!
Unfortunately I am dependant on the toolkit because I do not know enough to root manually.
Suggestions? Thanks.
Bill235 said:
The updating part got me in trouble.......
I accepted the system update and am now running android 4.3 but lost root.
So I went back to the WUGfresh Nexus Root kit. Updated everything, am now on version 1.7.3 of the toolkit, followed all the instructions (uninstalled and re-installed driveers) and got stuck on the same problem I had the first time I tried rooting: the adb : step3 of the full driver test. adb device not found .
I did reboot twice, am using the oem asus cable, etc. What a pain!!
Unfortunately I am dependant on the toolkit because I do not know enough to root manually.
Suggestions? Thanks.
Click to expand...
Click to collapse
So you're stock 4.3 now? Rooting manually isn't hard bud, setting up the toolkit is harder IMO.
You just need to download and install the Android SDK. Then download a custom recovery .img file, and a SuperSU flashable zip. Put the SuperSu flashable zip on your /sdcard. You'll then boot into the bootloader, open a command prompt and change directories to your Android SDK (Ex. mine is at C:\sdk\platform-tools) and run the command: fastboot flash <name of recovery file>.img
Then reboot into recovery, flash the SuperSU zip, reboot, done. You're rooted. There are plenty of How To's stickied in the General Forums for the N7 here.
RMarkwald said:
So you're stock 4.3 now? Rooting manually isn't hard bud, setting up the toolkit is harder IMO.
You just need to download and install the Android SDK. Then download a custom recovery .img file, and a SuperSU flashable zip. Put the SuperSu flashable zip on your /sdcard. You'll then boot into the bootloader, open a command prompt and change directories to your Android SDK (Ex. mine is at C:\sdk\platform-tools) and run the command: fastboot flash <name of recovery file>.img
Then reboot into recovery, flash the SuperSU zip, reboot, done. You're rooted. There are plenty of How To's stickied in the General Forums for the N7 here.
Click to expand...
Click to collapse
Will look into your suggestions later because I am rooted again. It was the adb drivers again. The universal ones just would not work for me. The Samsung signed drivers on the other hand worked smoothly and then the toolkit ran smoothly and I am rooted. But it wiped out my TWRP recovery so I will re-install that next.
Thanks for the help.
About your advice, than you. But as a newbie I need clearer instructions. "download and install the Android SDK". Where? to the pc or the tablet? etc.
I need to learn more so I don't keep getting into these ridiculous binds!
Bill235 said:
Will look into your suggestions later because I am rooted again. It was the adb drivers again. The universal ones just would not work for me. The Samsung signed drivers on the other hand worked smoothly and then the toolkit ran smoothly and I am rooted. But it wiped out my TWRP recovery so I will re-install that next.
Thanks for the help.
About your advice, than you. But as a newbie I need clearer instructions. "download and install the Android SDK". Where? to the pc or the tablet? etc.
I need to learn more so I don't keep getting into these ridiculous binds!
Click to expand...
Click to collapse
Review the General forum for the N7 2013 here, as there are threads stickied to the top of that forum which has write-ups and video how to's that'll explain it all. I suggest to review those FIRST before you try doing things just so you can get a picture of what's going on. It may seem like a lot, but once you do it, it really is not.
The Android SDK is installed on your computer.
guys,my galaxy nexus suddenly stuck at google logo and when i try to flash custom rom always aborted probably CWM not the latest one
and then i flash factory image from fastboot, the process was success but when reboot again,,it's not going back to stock and still stuck at google logo...then i boot to recovery it is still have CWM and my /sdcard data still there..
so basically my phone like having a deep freeze, everytime i push files or flash anything then reboot the file is gone,,like nothing happened and back to the state before flash or push files
any idea how to solve this?
sorry for my bad english
jamehop said:
guys,my galaxy nexus suddenly stuck at google logo and when i try to flash custom rom always aborted probably CWM not the latest one
and then i flash factory image from fastboot, the process was success but when reboot again,,it's not going back to stock and still stuck at google logo...then i boot to recovery it is still have CWM and my /sdcard data still there..
so basically my phone like having a deep freeze, everytime i push files or flash anything then reboot the file is gone,,like nothing happened and back to the state before flash or push files
any idea how to solve this?
sorry for my bad english
Click to expand...
Click to collapse
bad emmc, need to be replaced... nothing will stick
well, you could try to download from here a stock version for your nexus: https://developers.google.com/android/nexus/images?
then you should flash TWRP (the latest): http://techerrata.com/browse/twrp2/maguro ---> I used both recoveries and I find this one better for wiping everything (this is the maguro/GSM version, if you are verizon or sprint google TWRP verizon/sprint galaxy nexus and download the respective version for your phone).
I believe you know how to do the basic things, if you aren't so sure about the adb commands and processes, you can find all you need here: http://forum.xda-developers.com/showthread.php?t=1529058
Now that you have TWRP on your nexus, do the following:
1- reboot in recovery mode (vol up (or down, i click both) + power, then chose with the vol+/- the recovery option and click power)
2- go to "Wipe" option ---> advanced wipe ---> select everything but USB OTG ---> wipe
3- adb push the .tgz file with the right commands, or use this program: http://forum.xda-developers.com/showthread.php?t=1599332
4- go to intall, select the file and flash it
5- click on reboot and reboot the phone normally
well, I am not really sure if this will work out, but you can at least try and see, if you have sprint/verizon galaxy nexus, make sure you can flash the android stock roms like this, I have GSM and it works with my phone and similars but im not sure for the others.
Hi guys I am trying to get my phone in some sort of working order. I have CWM Recovery 6.0.5.1 for some reason no matter what I do to change the recovery it stays the same. I've tried installing lower CWM and also tried installing TWRP which again it says it was installed but when i go to recovery it still shows the CWM recovery. I installed CM11 and it worked fine, when I installed gapps is when the problems started. I've tried install multiple roms now, and it just doesn't want to take anything
thetinyjesus said:
Hi guys I am trying to get my phone in some sort of working order. I have CWM Recovery 6.0.5.1 for some reason no matter what I do to change the recovery it stays the same. I've tried installing lower CWM and also tried installing TWRP which again it says it was installed but when i go to recovery it still shows the CWM recovery. I installed CM11 and it worked fine, when I installed gapps is when the problems started. I've tried install multiple roms now, and it just doesn't want to take anything
Click to expand...
Click to collapse
try restoring a stock nandroid backup. if you dont have one then download one from general thread. and also make a nandroid backup of your current rom. not so sure what your problem is but maybe returning to pure stock will help.
I am trying to load the nandroid but I cannot get this recovery to work right. I've tried installing openrecovery-twrp to install the nandroid but i cant get the CWM to remove. I really dont mind what bootloader is on there but anything just to install any rom
thetinyjesus said:
I am trying to load the nandroid but I cannot get this recovery to work right. I've tried installing openrecovery-twrp to install the nandroid but i cant get the CWM to remove. I really dont mind what bootloader is on there but anything just to install any rom
Click to expand...
Click to collapse
Install/flash via fastboot the official cwm 6.0.51 that you had. then try again. if your lucky then it might work.
thetinyjesus said:
I am trying to load the nandroid but I cannot get this recovery to work right. I've tried installing openrecovery-twrp to install the nandroid but i cant get the CWM to remove. I really dont mind what bootloader is on there but anything just to install any rom
Click to expand...
Click to collapse
Get TWRP Manager from the play store. Hit the three line menu thingy on the top left of the app, and pick install TWRP. Super easy.
Ok guys ive tried reinstalling the same CWM version and reinstalling CM11 with no luck. I cannot change the bootloader to TWRP because it appears to be stuck on the CWM. The problem started for me when I installed the gapps through CWM, as soon as I did that when the phone went to boot it now says please enter the password for android, then says it was the right password but data is corrupt and cant use phone.
Is there a way to attempt to just format the entire phone including partition size and start from scratch again?
thetinyjesus said:
Ok guys ive tried reinstalling the same CWM version and reinstalling CM11 with no luck. I cannot change the bootloader to TWRP because it appears to be stuck on the CWM. The problem started for me when I installed the gapps through CWM, as soon as I did that when the phone went to boot it now says please enter the password for android, then says it was the right password but data is corrupt and cant use phone.
Is there a way to attempt to just format the entire phone including partition size and start from scratch again?
Click to expand...
Click to collapse
How are you trying to flash these recoveries (they're not called bootloaders, that is something totally separate)?
Have you tried using TWRP Manager as I suggested earlier, or are you using ADB? And If you are using ADB and trying to flash it that way, what fastboot commands are you giving?
There is no way that your should be "stuck" with CWM.
Okay what i have to do is fastboot its the only thing i can get to work. Not at my computer but yeah i fastboot the recovery img via cmd in windows. Fastboot flash recovey i use ane it successfully does. Doesnt matter what img or recovery i use when i boot into recovery it still uses cwm. Also only way i can put a rom on is adb sideload but now thats even failing with status 7 error
Also when i try the command fastboot oemRUU or whatever the command is it reboots the phone shows CM logo and boots till asking for android pw
thetinyjesus said:
Okay what i have to do is fastboot its the only thing i can get to work. Not at my computer but yeah i fastboot the recovery img via cmd in windows. Fastboot flash recovey i use ane it successfully does. Doesnt matter what img or recovery i use when i boot into recovery it still uses cwm. Also only way i can put a rom on is adb sideload but now thats even failing with status 7 error
Click to expand...
Click to collapse
The status 7 error is because of an outdated recovery. Not much help, I know.
It's strange that the TWRP Manager doesn't work. I've helped others with problems flashing recovery, and it has worked for them.
You could also try ROM Toolbox to update your CWM, or ROM Manager, but ROM Toolbox is better/more complete. It has everything ROM Manager has plus some.
The other option that you may not want to take is to do a COMPLETE wipe of your phone. That always sucks.
Going to try those programs. Thank you btw and how do i perform the full wipe i was about to throw the phone out lol.
@thetinyjesus You could also try this app. No PC necessary.
Thanks but cannot use the app i cannot get the phone to boot. Do you have directions for a full wipe
thetinyjesus said:
Going to try those programs. Thank you btw and how do i perform the full wipe i was about to throw the phone out lol.
Click to expand...
Click to collapse
Actually, you full wipe in recovery. lol
If you haven't tried TWRP Manager yet, that would be my first choice.
Damn that didnt work than i tried all those format options in the bunked recovery with no luck it sucks
If you're using the command prompt to flash the recovery, provide a screenshot of your desktop so that we can see what you're doing and what "it's" doing.
Starting to think that it's more of an "operator" fault and not anything to do with the device that doesn't want to play along.
Okay once im back home ill show the output
Here is the output from flashing the recovery. Once again when I went to recovery it loaded with CWM.
Also here is the output from sideloading the cm file again (same error no matter what rom I try)
Windows CMD: C:\Users\Jimmy\Desktop\platform-tool>adb sideload cm.zip
sending: 'cm.zip' 100%
Phone: Installing update...
set_perm_recursive: "/system" not a valid uid
E: Error in /tmp/update.zip
(Status 7)
Installation aborted
Anyone?
So I attempted to root my HTC Desire 816 dual sim. I managed to get it to work following instructions I found from this site. I then went on to try and install Cyanongenmod onto my device, I can't remember where the site was that I was following but I had to, within CMW recovery, wipe data/factory reset, wipe dalvik cashe, format system and format partition.
I did all this then tried to flash this ROM but it said it was the wrong ROM for my device and it said my device was htc_a5dug. which I've had no luck finding anywhere.
Now the phone will only boot into CMW recovery, I can install superSU but any other ROMs I've tried it has aborted automatically, if i restart the system from CMW, it comes up saying there is no root access, root missing /system/xbin/su ( see one of the attached pictures)
I've managed to get it restarted to the bootloader page twice (happens randomly when I select restart to bootloader from CMW) (pictures of bootloader in attatchments showing no OS)
I have a feeling I've totally stuffed my phone when i formatted the system and partition
If anyone has any idea how I can get this fixed I would be so greatful.
PS I'm feeling quite noobish right now
Download cwm backup for your device and restore it in cwm if you don't have your own backup
drummer1839 said:
Download cwm backup for your device and restore it in cwm if you don't have your own backup
Click to expand...
Click to collapse
where do I get a cwm backup from?
[edit] OK I flashed a recovery stock.img file, then I got a red triangle, the phone rebooted and now its stuck on the htc android startup screen and I can't turn the phone off. so Ill have to wait till the battery runs flat.
In the mean time more suggestions and guidance would be super.
drummer1839 said:
Download cwm backup for your device and restore it in cwm if you don't have your own backup
Click to expand...
Click to collapse
Found a backup and my phone is now working again, Thank you very much for helping.
Remember there is a golden rule always make a backup when you want to flash something new