[Q] Stuck with Knox bootloader - GT-N7105 - Galaxy Note II Q&A, Help & Troubleshooting

I did a stupied thing to update firmware to 4.3 when i didn´t check before what it can give for problem. I have TLA and changed to NEE because it is a firmware that will work in my country. I made my cellphone to rooted after update and it work. But, CSC is unknown so i can not use KIES or OTA. I tried use differently methods as csc change and csc checker, but it will not work.
I have got information about Knox-bootloader will be enable so i can not downgrade back to TLA-firmware (4.1.2). I have checked my bootloader and it is "Knox Warranty Void: 1". It is not some about 0x0 or 0x1 and what it is..
Little facts about firmware:
Product Code: NEE
PDA: N7105XXUEMK5
CSC: N7105NEEEMK1
I had before:
Product Code: TLA
PDA: N7105XXDMC3
CSC: N7105TLADMC1
I can understand to i can not downgrade now, but how i will fix CSC, that is unknown and will confirm that is a NEE instead for TLA so it will work example with KIES and OTA.
I need get some advice from you in this forum so i can find a way and solve that.

jedins said:
I did a stupied thing to update firmware to 4.3 when i didn´t check before what it can give for problem. I have TLA and changed to NEE because it is a firmware that will work in my country. I made my cellphone to rooted after update and it work. But, CSC is unknown so i can not use KIES or OTA. I tried use differently methods as csc change and csc checker, but it will not work.
I have got information about Knox-bootloader will be enable so i can not downgrade back to TLA-firmware (4.1.2). I have checked my bootloader and it is "Knox Warranty Void: 1". It is not some about 0x0 or 0x1 and what it is..
Little facts about firmware:
Product Code: NEE
PDA: N7105XXUEMK5
CSC: N7105NEEEMK1
I had before:
Product Code: TLA
PDA: N7105XXDMC3
CSC: N7105TLADMC1
I can understand to i can not downgrade now, but how i will fix CSC, that is unknown and will confirm that is a NEE instead for TLA so it will work example with KIES and OTA.
I need get some advice from you in this forum so i can find a way and solve that.
Click to expand...
Click to collapse
158 people have read this thread and NO comment!!! - I don´t know it will solve if i can get TLA-firmware in 4.3 with knox-bootloader that will solve my problem with CSC i flash with TLA-firmware? I tried all way to fix NEE-firmware but it help nothing...

U can just try to find csc for ur region and flash it on ur phone. I believe u have cwm on ur phone now, rite?
Sent from the corner of this rounded earth (N7105 v4.3, powered by LionROM)
---------- Post added at 08:52 AM ---------- Previous post was at 08:47 AM ----------
Btw, u can find from this thread :
http://forum.xda-developers.com/showthread.php?t=2031575
If u can't find, u can try to ask the OP to help u create urs, perhaps he could help u to make a zip flashable csc.
Sent from the corner of this rounded earth (N7105 v4.3, powered by LionROM)

Related

[Q] unrooting . not sure what rom to use :/

so a friend of mine asked if i could UN-root his note-ii
ive managed to find this site :
sampro (dot) pl/tag/n7100dxdlk5/
but i cant tell which firmware i should use,
i haven't done unrooting before (though ive rooted quite a few phones and tablets now) so this is new to meand i dont want to screw his phone up . lol
ive narrowed it down to these four :
PDA: Modem: CSC: Data: CSC: Country: Android: Changelist:
N7100XXDMB2 N7100DXDLK5 N7100OLBDMA4 02.2013 XTC Philippines 4.1.2 679347
N7100XXDMB2 N7100DXDLK5 N7100OLBDMA4 02.2013 XTE Philippines 4.1.2 679347
N7100XXDMB2 N7100DXDLK5 N7100OLBDMA4 02.2013 SMA Philippines 4.1.2 679347
N7100XXDMB2 N7100DXDLK5 N7100OLBDMA4 02.2013 GLB Philippines 4.1.2 679347
heres some info about his phone :
i.imgur (dot) com/2mm5vGn.jpg
*** using this guide i found: theunlockr (dot) com/2013/04/06/how-to-unroot-the-samsung-galaxy-note-2-gt-n7100/
EDIT: sorry for the lame first post -_-;
i think i got it
he got his phone from globe telecoms so i downloaded this:
GT-N7100_GLB_N7100XXDMB2_N7100OLBDMA4_N7100DXDLK5.zip
:fingers-crossed:
If you want to unroot just go to SuperUser's settings and disable root.
Memphis_ said:
If you want to unroot just go to SuperUser's settings and disable root.
Click to expand...
Click to collapse
the "temp unroot" option?
nah. i think hes goin to have it checked and he wants it unrooted . warranty stuff.. (?)
Options are different for each rom but in Dr. Ketan's guide (for prerooted rom):
open SuperSu from application drawer - setting - unroot
Click to expand...
Click to collapse
If you want to unroot for warranty you have to check your flash counter (must be zero): http://forum.xda-developers.com/showpost.php?p=31801078&postcount=3
Then just flash an official firmware. You can use sammobile to sort by country.

[Q] n7100 N7100XXUEMK9 no IMEI odin FAIL KNOX activated

Hi everyone,
I am tried to recuperate a Samsung note 2 GT-N7100 without efs backup and baseband, imei and network lost. KNOX is activated.
Following to "Originally Posted by dr.ketan View Post N7100XXUEMJ5 How to Root + Remove New Bootloader + KNOX Free" from "dr.ketan" I really hope that I can do it. But in the first steep I´m blocked, because when I try to flash "PDA: N7100XXUEMJ5" in the first second appears "FAIL" and the phone said "that is not compatible with this version".
To download the original rom from sammovile like dr-ketan said linking to "http://forum.xda-developers.com/showthread.php?t=2499794" of "Faryaab" and I cant find:
Model: GT-N7100
Country: Open Europe
Version: Android 4.3
Changelist: 2138564
Build date: Wed, 20 Nov 2013 19:16:05 +0000
Product Code: OXX
PDA: N7100XXUEMK9
CSC: N7100OXXEMK4
MODEM: N7100XXUEMJ9
Download: Mod Edit on links.
or
Model: GT-N7100
Country: Open Asia
Version: Android 4.3
Changelist: 1903221
Build date: Wed, 16 Oct 2013 23:49:26 +0000
Product Code: OLB
PDA: N7100XXUEMJ5
CSC: N7100OLBEMJ4
MODEM: N7100XXUEMJ5
Download:Mod Edit on links.
So I download from external webs but am not sure if it doesn’t work or is my phone´s problem.
I explain exactly all my probes that i did before this post, an actually I am really feel that I´m loose this battle, so please if anybody has an idea it´ll be great!
I beging with no IMEI, so the phone can´t take network to use it. Always that become dead the only way to recuperate it is flash via odin:
Model: GT-N7100
Model name: Galaxy Note II
Country: Spain
Version: Android 4.3
Changelist: 2138564
Build date: Wed, 20 Nov 2013 10:22:31 +0000
Product Code: PHE
PDA: N7100XXUEMK9
After that I can swicth on, but steel without IMEI and network; and of course KNOX activated.
Ok, let´s go to explain what I did before in case this can give aut some information:
1.- To recuperate the IMEI with ARIZA-Path
http://forum.xda-developers.com/galaxy-s3/help/solved-siii-network-problem-update-sn-t1918601
I obtain root access to install busy-box and ariza-patch with KNOX activated. The patch was apply correctly, but it wasn’t recuperate the IMEI
2.- To recuperate the modem or base band using different files
Here I used many post from XDA testing different modems, patch and baseband according of my PDA file in every moment. But still no work, sometimes become in CWM mode "signature fail", other via odin "PASS"; but the conclusion in every case is the same, "phone unknown, no baseband, no IMEI..."
Here I have other question, when u flash the modem, for example "XXDME4 / DXDMF1 / DDMG1" do you have to put only the correct one (DXDMF1 in my case) or all of it. I did both, just to try.
http://forum.xda-developers.com/showthread.php?t=1584250 to read and http://forum.xda-developers.com/showthread.php?t=2044937 to download modems
http://forum.xda-developers.com/showthread.php?t=2468119
3.- To recuperate the IMEI via flash Philz after that in CWM using this post http://forum.xda-developers.com/showthread.php?t=2536418
The same situation
4.- To complete flash and recovery with http://forum.xda-developers.com/showthread.php?t=2154890
I did the same operation in other S-4 and works, but here my problem is:
- The complete pack of 5 files to flash it via odin, I only found for android 4.1.2
- If I try to downgrade with KNOX active, become "FAIL"
- If I try to flash a version of android 4.3 without KNOX, appears one more time the same "FAIL"
Posible solution for that ¿¡?
- Find out a complete flash files for android 4.3 (PDA, MODEM or baseband, BOOTLOADER, CSS and in case Pit file)
- Downgrade to 4.1.2 and install OXA pack that I have it
- Restore it for SAT http://forum.xda-developers.com/showthread.php?t=2618261 with flash counter in 0
- Use KIES to restore it (I hate this possible solution) external link obviously in http://www.droidviews.com/firmware-upgrade-encountered-an-issue-solution/
Hopefully u posts it in correct place and someone can help me.
Regards to moderates people and every person who post looking for helps to others.
To Downgrade you N7100 and remove KNOX you need
1. OLD JTAG microSD card
2. Open the phone
3. Short Resistor
4. Power up the phone
5. Wait for success message
6. Assembly back
7. Flash to ANY old SW and Knox will not showed in Download Mode
Many phones checked like that

[Q] Install 4.4.2 from Sammobile manually

Hi All,
Got a small question about upgrading my S4Mini (GT-I9195 LTE) from 4.2.2 to 4.4.2.
At the moment my phone is on stock-rom which is 4.2.2 , when i check for 'updates' it says, 'latest updates already installed'.
Also when connecting to 'Kies' , the program says latest firmware already installed..
However when i check the Sammobile website for the GT-I9195 Model there are newer firmware's showing up , Android 4.4.2, but it depends on the country if the firmware is already at 4.4.2.
For the Netherlands, where i'm from, this one is available :
Model: GT-I9195
Model name: GALAXY S4 mini LTE
Country: Netherlands (Vodafone)
Version: Android 4.4.2
Changelist: 1646188
Build date: Tue, 27 May 2014 08:17:05 +0000
Product Code: VDF
PDA: I9195XXUCNEA
CSC: I9195VFGCNE4
MODEM: I9195XXUCNEA
However, i'm not with Vodafone as a provider, would that be a problem ?
When i check my phone specs, this is what i get:
AP: I9195XXUBNB3
CP: I9195XXUBNB3
CSC: I9195PHNBND1
Can i just install android 4.4.2 from Sammobile without any problem ?
Thanks in advance.
Mascarponi said:
Hi All,
Got a small question about upgrading my S4Mini (GT-I9195 LTE) from 4.2.2 to 4.4.2.
At the moment my phone is on stock-rom which is 4.2.2 , when i check for 'updates' it says, 'latest updates already installed'.
Also when connecting to 'Kies' , the program says latest firmware already installed..
However when i check the Sammobile website for the GT-I9195 Model there are newer firmware's showing up , Android 4.4.2, but it depends on the country if the firmware is already at 4.4.2.
For the Netherlands, where i'm from, this one is available :
Model: GT-I9195
Model name: GALAXY S4 mini LTE
Country: Netherlands (Vodafone)
Version: Android 4.4.2
Changelist: 1646188
Build date: Tue, 27 May 2014 08:17:05 +0000
Product Code: VDF
PDA: I9195XXUCNEA
CSC: I9195VFGCNE4
MODEM: I9195XXUCNEA
However, i'm not with Vodafone as a provider, would that be a problem ?
When i check my phone specs, this is what i get:
AP: I9195XXUBNB3
CP: I9195XXUBNB3
CSC: I9195PHNBND1
Can i just install android 4.4.2 from Sammobile without any problem ?
Thanks in advance.
Click to expand...
Click to collapse
Network/carrier specific firmware may have custom software or setting for the ROM, it better to find some other model that are as close to your phone's spec as possible to avoid any potential problem.
As if your phone has Know, it would trigger Know if you don't update via the official way.
TNCS said:
Network/carrier specific firmware may have custom software or setting for the ROM, it better to find some other model that are as close to your phone's spec as possible to avoid any potential problem.
As if your phone has Know, it would trigger Know if you don't update via the official way.
Click to expand...
Click to collapse
Hi, thanks for your answer.
Knox-flag is already triggered on my phone, but because i had to sent it back to shop for maintenance they reset it back to factory settings (android 4.2.2.)
However, i don't get it the way Samsung is updating the phone's. It's said that 4.4.2 is out for S4Mini , however when i'm searching for my device on Sammobile (I9195XXUBNB3), it still says 4.2.2.
Should I wait with updating, or what else ?
Mascarponi said:
Hi, thanks for your answer.
Knox-flag is already triggered on my phone, but because i had to sent it back to shop for maintenance they reset it back to factory settings (android 4.2.2.)
However, i don't get it the way Samsung is updating the phone's. It's said that 4.4.2 is out for S4Mini , however when i'm searching for my device on Sammobile (I9195XXUBNB3), it still says 4.2.2.
Should I wait with updating, or what else ?
Click to expand...
Click to collapse
That depends entirely on you... If you wish to preserve the warranty and keep the KNOX, than don't. If you can't wait and don't get bother by KNOX or warranty than go for it.
LOL, too tired, I just realize I keep typing KNOX as 'know'...
TNCS said:
That depends entirely on you... If you wish to preserve the warranty and keep the KNOX, than don't. If you can't wait and don't get bother by KNOX or warranty than go for it.
LOL, too tired, I just realize I keep typing KNOX as 'know'...
Click to expand...
Click to collapse
I just typed that my KNOX warranty is already void, it's triggerd 0x1.
I'm now just wondering what the best way is for me to update to stock 4.4.2...i'm confused with al the stock-roms that have 4.4.2 for S4Mini on Sammobile.
Mascarponi said:
I just typed that my KNOX warranty is already void, it's triggerd 0x1.
I'm now just wondering what the best way is for me to update to stock 4.4.2...i'm confused with al the stock-roms that have 4.4.2 for S4Mini on Sammobile.
Click to expand...
Click to collapse
All the ROM listed on Smmmobile is for different region. And I would also expect there won't be a 4.4.2 for your specific phone since you've check via Kies. So you need to find a phone from another region that are same spec as yours - band, function, etc and prefer not a carrier/network model.
Alternatively you can go for the custom KK ROM here.
TNCS said:
All the ROM listed on Smmmobile is for different region. And I would also expect there won't be a 4.4.2 for your specific phone since you've check via Kies. So you need to find a phone from another region that are same spec as yours - band, function, etc and prefer not a carrier/network model.
Alternatively you can go for the custom KK ROM here.
Click to expand...
Click to collapse
O.k..that is right

[Q] safe root for BML4 (CSC XEO) needed! up-/downgrade possible?

Hello,
I've already tried the search and google but I'm still not sure.
I've been wondering for a while why I did not receive any firmware update for my GT-I9195 and finally figured out, that I've been sold a Polish version of the phone (XEO). According to sammobile, there have been very few updates for this version.
*#1234# is showing:
AP: I9195XXUBML4
CP: I9195XXUBML4
CSC: I9195XEOBNA1
I don't want to trigger Knox, because I already had a warranty case...
Is it possible to upgrade it to 4.4.2 with a different CSC and use towelroot?
Is it possible to downgrade to BMK3 (or BMJ7) and use saferoot or Kingo?
Thanks in advance!

Warranty Void

Hey,
I have samsung galaxy A5 A520F/DS UAE version.I have attached its original Firmware details.In order to use jio voice of over lte i have updated INU Indian firmware.Now my device
Droped and receiver is not working.I want to claim warranty.In samsung info now my firmware details show multi csc and my baseband chaged.
My Question is
1.Will i get warrenty if i just download and flash XSG uae firmware through Odin ?
2.Will it change my base band to original version ?
3.I Don't know wheather its UAE XSG OR LYS.is there any way to know this from screenshots attached ?
Sorry unable to add attachments it fails please reply with provided information.i can't share even image link because am new user.
And how do i attach screenshot
Please reply
1- there is no picture attached .
2- flashing official firmware does not void the warranty as it does not trigger knox switch.
3- Better use the modem attached with the firmware as they are optimized to work together and avoid triggering knox while flashing only one component of the firmware.
4- You can find weather it is XSG or LYS only in recovery and not in software information.
shafez said:
1- there is no picture attached .
2- flashing official firmware does not void the warranty as it does not trigger knox switch.
3- Better use the modem attached with the firmware as they are optimized to work together and avoid triggering knox while flashing only one component of the firmware.
4- You can find weather it is XSG or LYS only in recovery and not in software information.
Click to expand...
Click to collapse
When i attach a screenshot it says bad request.I have attached screenshots links.
What you mean by one component?.please be specific.my current csc is ins.
https://ibb.co/kCv3X6
https://ibb.co/ghPGKm
https://ibb.co/jTB2s6
These are my screenshots before i did flash ins firmware using odin which is downloaded from sammobile .
I want warranty for changing my receiver. So do i need to go back to original Firmware for getting warranty.my device is still official in downloading mode.
And i don't know which is my original Firmware xsg/lys
In downloading mode after flashing its says successfully applied multi csc and its inu

Categories

Resources