Develop Bugs

[CWM][Root]SuperSU 1.25

I didn't see this posted so I thought I would upload it for those that like to root the old fashioned way
First off thanks to Chainfire for this great app.
SuperSU is quickly becoming the root option of choice. I have been using it for a few weeks and haven't had any problems with it plus I enjoy the extra features and neat interface.
This zip will remove SuperUser and install SuperSU. Of course if you are already rooted you can just download it from the market. This is to be used if you are in the situation where you need to root from recovery.
If you have SuperUser installed on the data partition you will want to remove it from the application menu. For some reason when I had it delete from data it would leave a phantom icon even after clearing cache and dalvik. Not sure why but it is best to just uninstall it.
If you have SuperUser in system/app but it isn't named Superuser.apk, SuperUser.apk or com.noshufou.android.su-1.apk you will want to manually remove it.
For more information on SuperSU visit https://play.google.com/store/apps/details?id=eu.chainfire.supersu&hl=en
Download: http://www.androidfilehost.com/?fid=22900092470034675
MD5: 93c93f2b58e60e09108dc7867c14e5c0
Download: http://tinyw.in/dZD3
MD5: 93c93f2b58e60e09108dc7867c14e5c0

Thanks
Sent from my SPH-D710 using Tapatalk 2

thank you. I just flashed.

Will this work on a stock ff18 trying to flash through stock recovery?
Sent from my Nexus 7 using xda premium

spongaweb said:
Will this work on a stock ff18 trying to flash through stock recovery?
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
I don't beleive so. Because you need to install zip from sd card option. Stock recovery only has install update.zip

g_ding84 said:
I don't beleive so. Because you need to install zip from sd card option. Stock recovery only has install update.zip
Click to expand...
Click to collapse
Correct. You need custom recovery to install this or any unofficial zips.

spongaweb said:
Will this work on a stock ff18 trying to flash through stock recovery?
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
You can always flash agat's kernel recovery via odin or mobile odin. then you'll have custom recovery to flash zips.

Updated to 0.95.
What's in this version:
- Fixed action bar icon sizes
- Fixed a few JellyBean-related issues
- Added automatic binary updated during boot if needed and possible
- New logo/icons
- Updated languages

Mine just up dated. I like the new icon.
Sent from my SPH-D710 using XDA

g_ding84 said:
Mine just up dated. I like the new icon.
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
I like the new icon as well.

crawrj said:
I like the new icon as well.
Click to expand...
Click to collapse
I have done some reading and it seems that people are having problems with regular super user. As I did before I flashed this. Do you know if devs are putting this into their ROMs? I know I flash it after I flash any ROM.
Sent from my SPH-D710 using XDA

g_ding84 said:
I have done some reading and it seems that people are having problems with regular super user. As I did before I flashed this. Do you know if devs are putting this into their ROMs? I know I flash it after I flash any ROM.
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
Superuser has a long history so I think most people include it out of habit or are just reluctant to use something new. I think that more people will start including it. All of my current stock rooted Roms have it and will have it going forward.

Crawrj can u update the link or someone else post one? The link in op is down.
Sent from my SPH-D710 using xda premium

musclehead84 said:
Crawrj can u update the link or someone else post one? The link in op is down.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Dev host was down for a few hours tonight. Its back up now. Thanks for posting this crawj. Very helpful.

Updated to 0.96

I'm on sprint E4GT CM10a5.2 lean install, then this kick a** gApps dark themes. Instead all the options. Then I installed chainfire superSU.zip .96
I changed the CPU to smarta**.
Freaking love this phone again.
Sent from my SPH-D710 using XDA Premium HD app

crawrj said:
This is to be used if you are in the situation where you need to root from recovery.
Click to expand...
Click to collapse
Just to clarify, this app will not root your device from recovery if unrooted, correct? I think you meant that you can use this zip if you need to flash superSU from recovery, correct?
sj
Sent from my E4GT on CM10 9/7 nightly using [email protected] Pro 2.2.8

sjsharksfan420 said:
Just to clarify, this app will not root your device from recovery if unrooted, correct? I think you meant that you can use this zip if you need to flash superSU from recovery, correct?
sj
Sent from my E4GT on CM10 9/7 nightly using [email protected] Pro 2.2.8
Click to expand...
Click to collapse
No this will root your phone if you flash from recovery. If you have regular superuser this will replace it.
Sent from my SPH-D710 using XDA

Just upgraded from ff18 to fh13, wifi tether app was not remembered by superuser, every time I turned it on or off I would have to manually approve it. Switched to the new SuperSU and problem fixed! Also like the new icon...
Those who would trade Liberty for Security, will end up with neither.

Updated to 0.97.
What's in this version:
- Fixed issue with modified AOSP su binary
- Fixed wrong translation crashing app on toast
- Fixed possible exploit (preventive)
- Modified system and shell user - no longer granted root by default
- Added "ADB shell" display
- Added warning to selecting full content logging
- Added method for apps to disable (by default only) full content logging if known to be problematic
- Updated languages

(Guide) Knox files to delete and locations

I extracted the update zip posted and just extracted it and searched for knox and came up with 10 files associated to knox. Use some root explorer then....
In system/app you need to pwn....
(1&2) KNOXAgent.apk & KNOXAgent.odex
(3&4) KnoxAttestationAgent.apk & KnoxAttestation.odex
(5&6) KNOXStore.apk&KNOXStore.odex
Found in System/framework
(7) KNOXModeSwitcher.apk
(8) sec_container_1.zzzKnoxLauncher.apk
Found in System/etc
(9) com.sec.knox.store
Found in system/lib
(10) libknoxdrawglfunction.so
Edit* lorjay589 has posted two sets of updates both are KNOX-FREE. One rooted one stock....they both use the MC2 bootloader opposed to the MK4 bootloader. Go here http://forum.xda-developers.com/showthread.php?t=2541395 and be sure to hit the thanks button for his work.
We now have a full flashable 4.3 rom odex thaks to lorjay589, with deodex cooking in kitchen now (same thread above)...stay tuned

Will it install OK with the missing files?
Sent from my SPH-L900 using Tapatalk

stinger4321 said:
Will it install OK with the missing files?
Sent from my SPH-L900 using Tapatalk
Click to expand...
Click to collapse
I haven't tried yet...I believe you'd have to also edit the install script
Edit....btw in dev section lorjay has posted the update minus all the knox....it breaks wifi but he is looking into a fix from the international thread

louforgiveno said:
I haven't tried yet...I believe you'd have to also edit the install script
Edit....btw in dev section lorjay has posted the update minus all the knox....it breaks wifi but he is looking into a fix from the international thread
Click to expand...
Click to collapse
Thanks

lorjay589 said:
Thanks
Click to expand...
Click to collapse
Thank you for jumping in both feet and getting some stuff done for us !

The s3 did the same. Cnexus used an at&t kernel and it fixed wifi. Worked on my wifes s3
Sent from my SPH-L900 using Tapatalk

lol hey buddy no slacking you need to make sure you keep this updated lol, im gonna link it to my thread for people who already went to the mk4 update from the knox update

lorjay589 said:
lol hey buddy no slacking you need to make sure you keep this updated lol, im gonna link it to my thread for people who already went to the mk4 update from the knox update
Click to expand...
Click to collapse
Haha lol....kk....got any goodies for us today?
Edit....just saw your post in the dev thread. ...root keeps breaking huh? That's with the mc2 bootloader?

louforgiveno said:
Haha lol....kk....got any goodies for us today?
Click to expand...
Click to collapse
still working on that rooted version. gotta get that up and running, then once done im gotta start testing all the note 3 features

lorjay589 said:
still working on that rooted version. gotta get that up and running, then once done im gotta start testing all the note 3 features
Click to expand...
Click to collapse
Nice...that's what's up ! Get crackin player !

My Appreciation
Big ups to louforgiveno, billard412, lorjay589, & dr.ketan - if it wasn't for you guys my phone would be stuck on the knox bootloader & even worse, still bricked! Now I'm knox free with MC2 bootloader, rooted on MK4, & rockin AOSP. Without you this would not be possible. I want to thank all of your efforts.

On my Note II the
(7) KNOXModeSwitcher.apk
(8) sec_container_1.zzzKnoxLauncher.apk
wouldn't show up using the search feature in the System/framework folder. I ended up finding them by doing an overall search in the System folder.
The full location is /system/containers/framework/... Using Root Explorer.
Just thought I'd point this out. Thanks for all the work you and lorjay89 have done with this dreaded Knox deal

Looking for some help
I am currently running Sprint's OTA 4.3 (MK4) on my Note 2. I have rooted using Odin 3.07 and CF-Auto-Root-t0ltespr-t0ltespr-sphl900.
After every reboot SuperSU is stopped (I assume by knox) until I reinstall it. Then SuperSU works (or at least pretends to).
My WIFI Trev-E Mod starts with errors, so I was looking to flash to LorJay's ROM. Which brings me to deleting/disabling the KNOX off of my phone.
I have root directory access, but when I delete the files you specify, they do not disappear, even though the explorer states they have been deleted and then only the files /system/apps location show at all. The rest aren't there.
I tried rebooting and KNOX is still there and I have to reinstall SuperSU again.
I have also rooted using Android Root in which it says root is successful as well. But with the same results.
Any help would be greatly appreciated.

Kodakmak said:
I am currently running Sprint's OTA 4.3 (MK4) on my Note 2. I have rooted using Odin 3.07 and CF-Auto-Root-t0ltespr-t0ltespr-sphl900.
After every reboot SuperSU is stopped (I assume by knox) until I reinstall it. Then SuperSU works (or at least pretends to).
My WIFI Trev-E Mod starts with errors, so I was looking to flash to LorJay's ROM. Which brings me to deleting/disabling the KNOX off of my phone.
I have root directory access, but when I delete the files you specify, they do not disappear, even though the explorer states they have been deleted and then only the files /system/apps location show at all. The rest aren't there.
I tried rebooting and KNOX is still there and I have to reinstall SuperSU again.
I have also rooted using Android Root in which it says root is successful as well. But with the same results.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
If you are going to install anther rom dont worry about knox. Put phone in download mode and use odin to flash recovery (I suggest philz 6.07.9) but uncheck the reboot option. Once it flashes everything disconnect from pc pull battery. Now the tricky part. Hold down volume up key, menu key, and power key. Now reinsert battery at same time. Ii find it easiest to turn phone upside down to perform this task. Once it boots into recovery just flash your desired rom.
Sent from my SPH-L900 using XDA Premium 4 mobile app

jlmancuso said:
If you are going to install anther rom dont worry about knox. Put phone in download mode and use odin to flash recovery (I suggest philz 6.07.9) but uncheck the reboot option. Once it flashes everything disconnect from pc pull battery. Now the tricky part. Hold down volume up key, menu key, and power key. Now reinsert battery at same time. Ii find it easiest to turn phone upside down to perform this task. Once it boots into recovery just flash your desired rom.
Click to expand...
Click to collapse
Awesome! I will try it now! Thank you!

So the button combo isn't working. Does that mean the flash didn't work?

I think jlmancuso meant to tell you HOME key, not MENU.
Sent from my SPH-L900 using XDA Premium 4 mobile app
---------- Post added at 11:51 AM ---------- Previous post was at 11:45 AM ----------
And from stock MK4 the easiest method to root and such for me is just use Google Kingo Root App on PC to root. It will restart phone and then you can install from the market GooManager if you want TWRP (touch) recovery, or RomManager for CWM. I installed all recoveries successfully (haven't tried any philz yet) and can flash whatever rom from there. Less battery pulling and no ODIN necessary.
Then usually I install Titanium Backup and remove Knox and freeze or remove other bloat. Leaves me an almost clean stock experience.
Just in case anyone needs an alternate method.
Sent from my SPH-L900 using XDA Premium 4 mobile app

ArchangelRenzoku said:
I think jlmancuso meant to tell you HOME key, not MENU.
Sent from my SPH-L900 using XDA Premium 4 mobile app
---------- Post added at 11:51 AM ---------- Previous post was at 11:45 AM ----------
And from stock MK4 the easiest method to root and such for me is just use Google Kingo Root App on PC to root. It will restart phone and then you can install from the market GooManager if you want TWRP (touch) recovery, or RomManager for CWM. I installed all recoveries successfully (haven't tried any philz yet) and can flash whatever rom from there. Less battery pulling and no ODIN necessary.
Then usually I install Titanium Backup and remove Knox and freeze or remove other bloat. Leaves me an almost clean stock experience.
Just in case anyone needs an alternate method.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
+1 on that ,
no Odin for me.
stock 4.3 ota rooted via kingo
de bloated and
de knoxed.
Sent from my SPH-L900 using JellyBombed Tapatalk 2

ArchangelRenzoku said:
I think jlmancuso meant to tell you HOME key, not MENU.
Sent from my SPH-L900 using XDA Premium 4 mobile app
---------- Post added at 11:51 AM ---------- Previous post was at 11:45 AM ----------
And from stock MK4 the easiest method to root and such for me is just use Google Kingo Root App on PC to root. It will restart phone and then you can install from the market GooManager if you want TWRP (touch) recovery, or RomManager for CWM. I installed all recoveries successfully (haven't tried any philz yet) and can flash whatever rom from there. Less battery pulling and no ODIN necessary.
Then usually I install Titanium Backup and remove Knox and freeze or remove other bloat. Leaves me an almost clean stock experience.
Just in case anyone needs an alternate method.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
YES!!! This totally worked! Finally free of the Knox downer! Thank you very much for posting!

Can I find step by step instructions?
Sent from my SPH-L900 using XDA Premium 4 mobile app

Anyone flash TWRP and a ROM after OTA

I did a search and couldn't find an answer. I got the OTA (Thanks to my wife, while I still sleeping) I did get it rooted and knox disabled. Don't care about the knox flag because my warranty is already gone. So now my question is do any of the 4.3-4.4 ROMS work (Skynote, Ditto etc)? Can I flash TWRP with goo manager?
Thanks in advance!
Geeve

geeve420 said:
I did a search and couldn't find an answer. I got the OTA (Thanks to my wife, while I still sleeping) I did get it rooted and knox disabled. Don't care about the knox flag because my warranty is already gone. So now my question is do any of the 4.3-4.4 ROMS work (Skynote, Ditto etc)? Can I flash TWRP with goo manager?
Thanks in advance!
Geeve
Click to expand...
Click to collapse
I haven't flashed TWRP thru goo manager but I have thru ODIN. You can get it from here.
http://goo.im/devs/OpenRecovery/t0lteatt
I just got done flashing SKY NOTE 4.3 Edition MJ4-4.3 (AT&T Leak).

I can confirm twrp installs from goomanager as thats how I installed it and successfully flashed an aroma addon (just a mod NOT a rom) with no issues
Did you thank your Developer today?

Thanks to both of you! Getting goo now. Not sure if I am brave enough to flash a ROM yet though till i can see what others have done.
Geeve
Sent from my SAMSUNG-SGH-I317 using xda app-developers app

geeve420 said:
Thanks to both of you! Getting goo now. Not sure if I am brave enough to flash a ROM yet though till i can see what others have done.
Geeve
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
I'm not brave enough yet to rom either but I can confirm Xposed installs perfectly and gearbox works just enough that pie controls work.
If you do that don't turn ANYTHING else in gearbox on. Use Wanam to mod out with as its built for the note 2.
Did you thank your Developer today?

Thanks Jspex! Looking into them now
Sent from my SAMSUNG-SGH-I317 using xda app-developers app

4.3 OTA to custom ROM
geeve420 said:
I did a search and couldn't find an answer. I got the OTA (Thanks to my wife, while I still sleeping) I did get it rooted and knox disabled. Don't care about the knox flag because my warranty is already gone. So now my question is do any of the 4.3-4.4 ROMS work (Skynote, Ditto etc)? Can I flash TWRP with goo manager?
Thanks in advance!
Geeve
Click to expand...
Click to collapse
I decided to be the sacrificial lamb and I can confirm that yes definitively you can go from stock 4.3 OTA to a custom 4.3 ROM. I updated to 4.3 OTA (dumb) and just now successfully flashed Ditto 3.1.1.
1. Root 4.3 OTA
2. Flash TWRP
3. Flash custom rom.
4. Run SuperSU
Some additional notes:
Did a dirty flash the first go around. The device didn't boot. Used the pull battery method to get into recovery (probably not necessary but oh well). Reflashed the rom this time using full wipe in AROMA (not in TWRP) and the device booted like a charm (even got an OTA Ditto 3.2 update bonus!).
Additionally AROMA didn't delete my data so I got to keep all my data from 4.3 OTA.
Last note my baseband is still MK6. I guess that's good because Ditto is still on MK5.

Lots of people have done this. What's so scary?
Sent from my GT-N7105 using XDA Premium 4 mobile app

JediMasterX V2 runs great on 4.3 bootloader. If you took the OTA to get to 4.3 then you are ready to go with JediMasterX just download the zip and follow the instructions in the OP.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app

4.3 OTA to custom ROM
joe3681 said:
Lots of people have done this. What's so scary?
Sent from my GT-N7105 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
If you knew this information already, it would have been helpful of you to share this information with the group instead of chiming in after the fact.

Just read this but a quick read anywhere around here would've been an answer
Sent from my GT-N7105 using XDA Premium 4 mobile app

Thanks everyone!!
Why it was scary is when I posted there was a lot going on. I hadn't seen where someone had taken the update, then flashed a ROM. I had seen a lot about the leak but not MK6. There were quite a few folks having trouble restoring backups, soft bricking etc. and it was due to the locked down boot loader being hostile to changes. I just didn't want a soft brick and have to use my Infuse till I could get it back up.
As far as what I have read so far, no one has been able to get back to MK6 after downgrading or roming and the backups of the stock MK6 aren't working. The reason I asked is because not much was being said about how ROMs were acting with the locked bootloader. No one was talking about steps to take if you have the MK6 update to ROM.
I have since flashed and I am running Sky Note Air Vaniila now and all is well. Just wanted to see what troubles if any others were having to help keep ducks in a row That way when folks want to ROM they know which ones work with the new Bootloader.
Geeve

[Q] aroma kills my wifi

I'm haveing a weird problem I'm on stock deodexed mk4 rom and I did the wifi patch fix wifi works but if I flash any theme or anything that uses aroma istaller it kills my wifi redoing wifi patch does nothing to get wifi back I have to reflash the rom. Any one know what's wrong

oakieville said:
I'm haveing a weird problem I'm on stock deodexed mk4 rom and I did the wifi patch fix wifi works but if I flash any theme or anything that uses aroma istaller it kills my wifi redoing wifi patch does nothing to get wifi back I have to reflash the rom. Any one know what's wrong
Click to expand...
Click to collapse
Which themes are you using? Which recovery are you using as well? Never heard of that with Aroma, although most roms I have used were none Aroma based..

doubledragon5 said:
Which themes are you using? Which recovery are you using as well? Never heard of that with Aroma, although most roms I have used were none Aroma based..
Click to expand...
Click to collapse
I have tried with twrp and phils touch and any theme or anything with aroma it doesnt have too be a theme i even put together a blank aroma zip it doesnt flash anything and it still kills wifi i had my friend test out an aroma installer on her note2 same prob

oakieville said:
I have tried with twrp and phils touch and any theme or anything with aroma it doesnt have too be a theme i even put together a blank aroma zip it doesnt flash anything and it still kills wifi i had my friend test out an aroma installer on her note2 same prob
Click to expand...
Click to collapse
Weird, try a none aroma based rom, and see what happens.. Also what rom are you using.. I know you said stock deodexd, but from whom.

doubledragon5 said:
Weird, try a none aroma based rom, and see what happens.. Also what rom are you using.. I know you said stock deodexd, but from whom.
Click to expand...
Click to collapse
I can flash anything that doesnt use aroma with no problems I can take any of zips that use aroma and kill my wifi rebuild them without aroma and flash them with no problem
I make flashable zips to fix mms on phones flashed to metropcs im trying to use aroma installer to make a zip for multiple devices. I have it running pretty smooth on note 2 cm 11and s4 4.4 so far but cant figure out note 2 4.3

oakieville said:
I can flash anything that doesnt use aroma with no problems I can take any of zips that use aroma and kill my wifi rebuild them without aroma and flash them with no problem
I make flashable zips to fix mms on phones flashed to metropcs im trying to use aroma installer to make a zip for multiple devices. I have it running pretty smooth on note 2 cm 11and s4 4.4 so far but cant figure out note 2 4.3
Click to expand...
Click to collapse
Not sure what the problem might be. I would simply find a rom you like minus aroma and use it instead... Or you can flash back to 100% stock and try it again..

doubledragon5 said:
Not sure what the problem might be. I would simply find a rom you like minus aroma and use it instead... Or you can flash back to 100% stock And try it again..
Click to expand...
Click to collapse
Not sure ur understanding my problem finding a rom is not going to help my issue i like the rom I'm on just fine nor is going back to 100% stock going to help i tried that also the problem happens when I'm on stock mk4 i have had 2 other people thqt i new had note 2 try aroma also same results for them

oakieville said:
Not sure ur understanding my problem finding a rom is not going to help my issue i like the rom I'm on just fine nor is going back to 100% stock going to help i tried that also the problem happens when I'm on stock mk4 i have had 2 other people thqt i new had note 2 try aroma also same results for them
Click to expand...
Click to collapse
Sorry I could not help.. One question, your MK4 does that include the bootloader? I know the rom I have tried, left out the bootloader and left in the MC2 bootloader..

doubledragon5 said:
Sorry I could not help.. One question, your MK4 does that include the bootloader? I know the rom I have tried, left out the bootloader and left in the MC2 bootloader..
Click to expand...
Click to collapse
At first no rom only but after finding this issue I odin mk4 tar I beleave included bootloader my bootloader now says knox warranty 0x01 or watever now it did say anything about knox before the tar. Thank u for ur help either way

oakieville said:
At first no rom only but after finding this issue I odin mk4 tar I beleave included bootloader my bootloader now says knox warranty 0x01 or watever now it did say anything about knox before the tar. Thank u for ur help either way
Click to expand...
Click to collapse
The mk4 does contain the knox bootloader so the only known way to go back to mc2 is by using billards back to stock mc2 with counter reset.
Now about the possible aroma issue. I have used a few aroma scripts and even did my own custom aroma for a rom and while they had issues none did what you are talking about. The issues i have experienced were lockups when switching from aroma menu to installer and back to aroma menu. I have found one version that gave me 0 issues. If you will try this out http://forum.xda-developers.com/showthread.php?p=47719471. Download version 4 (4.2 contains some stock mc2 rom making it large!!!) and do something simple like changing your recovery. See if this script causes the same issues as your other ones. Hopefully not and you will now have an aroma version you can build off.
Sent from my SPH-L900 using XDA Premium 4 mobile app

jlmancuso said:
The mk4 does contain the knox bootloader so the only known way to go back to mc2 is by using billards back to stock mc2 with counter reset.
Now about the possible aroma issue. I have used a few aroma scripts and even did my own custom aroma for a rom and while they had issues none did what you are talking about. The issues i have experienced were lockups when switching from aroma menu to installer and back to aroma menu. I have found one version that gave me 0 issues. If you will try this out http://forum.xda-developers.com/showthread.php?p=47719471. Download version 4 (4.2 contains some stock mc2 rom making it large!!!) and do something simple like changing your recovery. See if this script causes the same issues as your other ones. Hopefully not and you will now have an aroma version you can build off.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thank u I will try it I have tried many dif aroma zips but I will try this also I have desire to go back to mc2 as I stated I trying to work this for a mms fix for other people and can't expect people to down just to fix mms if it where for personal only this wouldn't be a prob I have no trouble fixing my own mms thanks again
Sent from my SPH-L900 using XDA Premium 4 mobile app

jlmancuso said:
The mk4 does contain the knox bootloader so the only known way to go back to mc2 is by using billards back to stock mc2 with counter reset.
Now about the possible aroma issue. I have used a few aroma scripts and even did my own custom aroma for a rom and while they had issues none did what you are talking about. The issues i have experienced were lockups when switching from aroma menu to installer and back to aroma menu. I have found one version that gave me 0 issues. If you will try this out http://forum.xda-developers.com/showthread.php?p=47719471. Download version 4 (4.2 contains some stock mc2 rom making it large!!!) and do something simple like changing your recovery. See if this script causes the same issues as your other ones. Hopefully not and you will now have an aroma version you can build off.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
The link for 4 is dead
Sent from my SPH-L900 using XDA Premium 4 mobile app

oakieville said:
The link for 4 is dead
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ok here is my dropbox link
https://www.dropbox.com/s/v14gdyqce8y25vb/SMRF vCyanamide.zip
Sent from my SPH-L900 using XDA Premium 4 mobile app

jlmancuso said:
Ok here is my dropbox link
https://www.dropbox.com/s/v14gdyqce8y25vb/SMRF vCyanamide.zip
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
OK I downloaded 4.2 already thanks to it help I have figured out that I'm am completely wrong its not aroma doing It apparently everytheme I tried contained an sh file also my zip contains an sh file based off one from a theme something in the sh file is doing it the sh file copies secmms.apk to sdcard patches it zipalign it and puts it back in /system/app then sets permissions to 0644 and replaces apns-conf.xml

oakieville said:
OK I downloaded 4.2 already thanks to it help I have figured out that I'm am completely wrong its not aroma doing It apparently everytheme I tried contained an sh file also my zip contains an sh file based off one from a theme something in the sh file is doing it the sh file copies secmms.apk to sdcard patches it zipalign it and puts it back in /system/app then sets permissions to 0644 and replaces apns-conf.xml
Click to expand...
Click to collapse
Well glad you got it on track now.
Sent from my SPH-L900 using XDA Premium 4 mobile app

jlmancuso said:
Well glad you got it on track now.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It is some causeing some permission issues I almost got it now ur awesome man thanks

oakieville said:
It is some causeing some permission issues I almost got it now ur awesome man thanks
Click to expand...
Click to collapse
No problem. I worked with aroma here on the note 2 and my old evo 3d. If you ever need any help feel free to hit me up.
Sent from my SPH-L900 using XDA Premium 4 mobile app

jlmancuso said:
No problem. I worked with aroma here on the note 2 and my old evo 3d. If you ever need any help feel free to hit me up.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
They need to call you the trouble solving dev.
Sent from my SPH-L900 using Tapatalk

jlmancuso said:
Well glad you got it on track now.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It turns out I can't chmod wildcard in recovery in .sh the command that killed my WiFi turned out to be "chmod 644 /system/app/*"
Sent from my SPH-L900 using XDA Premium 4 mobile app

[ROM][STOCK][PORT][*ODIN*] Stock rooted TW 4.4.2 (ported from sprint SGS3)

This, for the most part, is not my work. What this is is @DocHoliday77 's port of the sprint SGS3 4.4.2 ROM, which I have repackaged into an Odin .tar.md5; the point being for those who would rather flash this via ODIN instead of twrp/cwm.
You can thank DocHoliday77 for his hard work here, all I did was edit the build.prop and repackage with multiboot. Download link below.
Included in this .tar.md5:
-System image, with build.prop edited to accurately reflect our device.
-multiboot 2.12 recovery image (for those who don't know, it's TWRP 2.7 with the added ability to boot other ROMs in a sandbox)
-KT747 boot image, which is included with the original port flashable zip.
YOU MUST HAVE AN OFFICIAL 4.3 BOOTLOADER / MODEM INSTALLED. THERE IS NO WAY TO CIRCUMVENT THIS.
Download: Stock rooted 4.4.2 TW

Nice
First too. Didn't even realize
Sent from my SGH-I317 using Tapatalk

Thanks:laugh:

Not going to need this but great work man!

Choice for a flash able zip?
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app

Duffman14 said:
Choice for a flash able zip?
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
There already is one here
http://forum.xda-developers.com/showthread.php?t=2749495

talkingmonkeys said:
There already is one here
http://forum.xda-developers.com/showthread.php?t=2749495
Click to expand...
Click to collapse
Ty sir
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app

You're all quite welcome. I may reupload sometime soon with boot loader / modem included to make it easier for people. (There would be two different versions, one with the at&t modem and one with the bell/telus/rogers one)

Can anyone confirm whether or not this is a daily driver?

n_alvarez2007 said:
Can anyone confirm whether or not this is a daily driver?
Click to expand...
Click to collapse
Aside from not being able to send MMS with WiFi on (SMS works fine) this should be fully capable of being a DD.

Use Handcent messaging app, set it as default and mms while Wi-Fi is active will work

Restl3ss said:
This, for the most part, is not my work. What this is is @DocHoliday77 's port of the sprint SGS3 4.4.2 ROM, which I have repackaged into an Odin .tar.md5; the point being for those who would rather flash this via ODIN instead of twrp/cwm.
You can thank DocHoliday77 for his hard work here, all I did was edit the build.prop and repackage with multiboot. Download link below.
Included in this .tar.md5:
-System image, with build.prop edited to accurately reflect our device.
-multiboot 2.12 recovery image (for those who don't know, it's TWRP 2.7 with the added ability to boot other ROMs in a sandbox)
-KT747 boot image, which is included with the original port flashable zip.
YOU MUST HAVE AN OFFICIAL 4.3 BOOTLOADER / MODEM INSTALLED. THERE IS NO WAY TO CIRCUMVENT THIS.
Download: Stock rooted 4.4.2 TW
Click to expand...
Click to collapse
I cant seem to get this to flash with odin..... STOCK_ROOTED_4.4.2_TW_I747.tar.md5 is invalid

Can I install on i747m like this?
Sent from my SGH-I747M using XDA Premium 4 mobile app

Confirmed, this is not working at the moment. The system image is broken and I'm not sure why, bear with me

chivas1311 said:
Can I install on i747m like this?
Sent from my SGH-I747M using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Not sure as I cant read your language, sorry. But one part says its LI1 and another says ND3. First, the bootloader/firmware version MUST be a 4.3 build.
Second, what is the ND3? Is that some sort of test build? Or did I miss something somewhere?
Restl3ss said:
Confirmed, this is not working at the moment. The system image is broken and I'm not sure why, bear with me
Click to expand...
Click to collapse
Does it fail at the md5 check?
Sent from my SGH-T999 using Tapatalk

DocHoliday77 said:
Not sure as I cant read your language, sorry. But one part says its LI1 and another says ND3. First, the bootloader/firmware version MUST be a 4.3 build.
Second, what is the ND3? Is that some sort of test build? Or did I miss something somewhere?
Does it fail at the md5 check?
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
It does yeah, but I tried it without the md5sum and it failed as well, just after nand write start. On the download here the md5 check fails because the binary is supposedly invalid.
The system image was made by running mkfs-yaffs2-x86 on the system folder from the original port zip, running unyaffs does unpack it, but something is definitely not right with this image, I tried using unpack-ext4 on windows which usually works on odin system images but it didn't on this one.

Making an odin flashable isnt a straight forward process for the S3 it seems. MrRobinson is the only one I know of off hand that has an effective process to do so. He only gives clues to his process in his op. Ive done one a long time ago, but I think what I had to do was take tar the system.img dumped directly from the device using the dd command.
If I remember right, it had to be done immediately after flashing, been too long though so I cant remember for certain.
So if I am recalling it correctly, flash the rom, factory reset, then while still in recovery, using either adb or the built in terminal emulator, use dd to dump the image to your sd card.
Sent from my SGH-T999 using Tapatalk

DocHoliday77 said:
Not sure as I cant read your language, sorry. But one part says its LI1 and another says ND3. First, the bootloader/firmware version MUST be a 4.3 build.
Second, what is the ND3? Is that some sort of test build? Or did I miss something somewhere?
Does it fail at the md5 check?
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
It's a Stock 4.3 bulid from Telcel, Mexico, in SamMobile says this:
In english:

Ok, thanks for the clarification on that. Once its confirmed working, you should be able to flash it just fine. If that baseband is not 4.3 though, you will likely have to update it as well.
For now though, you can always just flash the rom this was built from. Should get you exactly the same thing, only the method is different.
Sent from my SGH-T999 using Tapatalk