Develop Bugs

[Q] Can't access sprint services after rooting and installing rom please help

I installed VIPERrom trinity 2.0 (no blame on them great rom I'm sure this is my doing) but now I can't access sprint services I.e. I. Can't make phone calls send texts or access internet unless via wifi...if anyone would have any possible fixes or suggestions I would greatly appreciate it. Thank you very much.

cnigro21 said:
I installed VIPERrom trinity 2.0 (no blame on them great rom I'm sure this is my doing) but now I can't access sprint services I.e. I. Can't make phone calls send texts or access internet unless via wifi...if anyone would have any possible fixes or suggestions I would greatly appreciate it. Thank you very much.
Click to expand...
Click to collapse
You can either try to reflash the ROM, try a factory/data reset, or Odin back to EB13 prerooted with CWM3 and flash the ROM. Sounds like Odin is the best bet. For Odin instructions follow this:
http://forum.xda-developers.com/showthread.php?t=773032
For EB13 prerooted go here:
http://forum.xda-developers.com/showthread.php?t=853209
Hope this helps.

I greatly appreciate the info but unfortunately neitherof those links helped, most likely my inability to follow the instruction, but when I would download the prerooted eb13 file it did not have any of the files mentioned in the directions...oh well get up early and try again. Thanks again for the help.

cnigro21 said:
I greatly appreciate the info but unfortunately neitherof those links helped, most likely my inability to follow the instruction, but when I would download the prerooted eb13 file it did not have any of the files mentioned in the directions...oh well get up early and try again. Thanks again for the help.
Click to expand...
Click to collapse
To use the EB13 file you need Odin which was in the first set of directions. Here is Odin in case the download link is broken.
This will wipe your phone and restore it to a factory condition but already rooted so on your computer unzip Odin into a directory (I called it Odin) then unzip the EB13 file and put the .tar and .pit files in the Odin directory. Open Odin. Uncheck the F.Reset box. Click PIT and put the EB13-EXT4.PIT in that box. Click PDA and put the EB13 tar file in there. Now power down your phone and Turn it back on holding the 1 key on the keyboard and then hitting the power button. A yellow triangle stating download mode will appear on the phone. Now connect your USB cable to the phone and computer. In a box on the Odin screen a COM number will pop up. Hit start, let it do its thing. If it passes it will reboot. If it gets stuck, pull the battery and try again, try other USB ports or a different cable if it gets stuck a few times. Check your service. If OK then continue to flash ROM.
Now with your ROM already on your sd card, shut down your phone and 3 finger (camera button, volume down, power all at once) into Clockwork Mod Recovery and let it do the EXT4 conversion...do not reboot. After that is done pick Install zip file from sd card, choose zip file, pick your ROM file and hit camera button. It will now flash your ROM.
All this is assuming you still want a custom ROM. If not I will point you to the stock unrooted files.

Thank you so much for the help, once i figured out i needed to download 7zip in order to release the file types it worked flawlessly and took only minutes so again thank you so much...yet after all that the problem was that sprint activated one of our very old phones sitting in a drawer at our house and removed my epic from service haha, so a long, unecessary road but glad to know the process works seamlessly thank you very much.

cnigro21 said:
Thank you so much for the help, once i figured out i needed to download 7zip in order to release the file types it worked flawlessly and took only minutes so again thank you so much...yet after all that the problem was that sprint activated one of our very old phones sitting in a drawer at our house and removed my epic from service haha, so a long, unecessary road but glad to know the process works seamlessly thank you very much.
Click to expand...
Click to collapse
HAHA, that is great. Well now you are much more experienced in restoring your phone in case you get into trouble.

Please Help me With my NOTE 2 ROOT ISSUES

I rooted my note 2 this saturday however as I did so it messed up my phone.
I created a topic here. http://forum.xda-developers.com/showthread.php?p=41721811#post41721811
I received replies however it wasn't help that I could use for someone with my rooting capablities.
The original problem
http://forum.xda-developers.com/newr...e=1&p=32466314
I followed the directions outlined in the topic I linked to above to root my Samsung Galaxy Note 2.
However once the rooting process was done my phone came back on and it was completely unable to read the sim card.
Not only that it wouldn't stay on. After 5 minutes the screen would go black however the power would still be on as I can see my led light flashing that I'm receiving messages and alerts.
To hopefully fix this I went ahead and unrooted my phone using the same application in the topic linked to above and the results are that it still won't read my sim and it the power issue is the same.
Can someone please help me out with this and provide the instructions I need to return my phone back to what it once was.
Then can someone also provide a reliable way of rooting the Samsung Galaxy Note 2 that won't cause my phone to become unresponsive.
Thanks
Click to expand...
Click to collapse
Whats happening now
I am not very advanced at all when it comes to flashing and rooting.
It's hard for me to just go and flash my phone that's why I had used that simple program that I linked to in the OP.
I just looked in the settings on my phone it it says
Mobile Network Type = Unknown
Service State = Out of service
My phone number = Unknown
IMEI = Unknown
IMEISV = Unknown
Device Status = Modified
I could really use some exact instructions on what stock rom for the note 2 is best and step by step instructions on how I flash it on.
I could also use some help with finding step by step instructions on how to root my note 2 successfully without running into this problem again.
Thanks
Click to expand...
Click to collapse
and my last post in my previous topic
So I followed the instructions http://forum.xda-developers.com/show....php?t=2052779 there to try and un-root my phone however I am still with the same results.
The phone reads my IMEI number as unknown and it still cannot read my sim card at all. My power comes on but once it goes inactive it stays off and to turn it back on I have to take the battery out, replace it, then power back on only for it to do the same thing and the process to be repeated once more.
I could really use some step by step instructions say for instance is there another way I can go about restoring stock ware on the phone. If so where are the links to the programs I need to download and what is the sequence I use those programs exactly to restore my phone back to stock. What commands and instructions need to be done within those programs.
I would like to root my phone once it's been returned back to a working functioning status as I cannot make calls or anything right now. I was looking at putting Cyaneogen Mod on it however if there is a better software I would appreciate if you could point it out. What programs do I use and how do I use those programs exactly so that I don't end up with the same result that I have right now where I
m unable to do anything with my phone.
I really hope someone helps me at the level I'm asking. I know it's a lot but I will be really grateful for the assistance.
Click to expand...
Click to collapse
I can really use some step by step instructions on what to do including links to whatever programs I need to use as well as how I use those programs exactly. Please please please someone help me as I can't afford to buy a new phone right now.

Bump.
Please don't forget about me. I really need help here.

Ok rooting is so stupid simple that id never even thought about using one of those root toolbox things. First you get the root file on your pc. I believe this is specific for your carrier and exact model of your phone. You can find this file on in the specific forum for model and carrier on this very site. Then you get odin also on your pc, also found on this site. Then follow 2-3 very simple instructions on how to flash it using odin. The exact instructions escape me since ive only done once or twice because I have never needed to go back to stock. The instructions will be found wherever odin and the root file are. Once everything listed is on your pc, from start of root process to finished is maybe 30seconds max.
Ive seen ALOT of issues where someone has screwed the pooch with those toolboxes.
You may have flashed the wrong root which has in turn wiped your carrier settings. If you can atleast turn your phone on and get to your app drawer then go into superuser or supersu app whichever app was installed and try removing root.
As far as all those settings are concerned there maybe a way to re inpit the necessary info. Like I said before, find the note specific to your carrier forum here and do a bit of reading. Thats how I stumble upon everything I know about my phone.
Another thing you could try is if your phone is still in usable state as far aswifi is concerned you could download goomanager (recovery installalation and rom tool) use that to install a new recovery, first thing id try from is a factory reset which can be done in recovery. Choose that option and reboot and see of your setting are good. If not then flash all new stock rom. With a new recovery you can flash an all stock plus rooted properly version of 4.1.2. The stock version is around 850megs so best to do that fron the pc as well. Once the download is done you can transfer that to the goomanager folder on internal memory load the app and choose the option flash roms, then check the box for the stock rom and click option order and flash on bottom and phone should reboot to recovery. Once in recovery there options for factory reset, wipe cache, wipe dalvik cache and then flash roms. Choose to factory reset again then wipe the caches then choose flash option till it where the rom is and click done it will do the rest.
Hope this gives you what you need. If there is something ive left out please someone else chime in here.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2

Dont know if this will help but
http://forum.xda-developers.com/showthread.php?t=2255943
sent from my T.A.R.T.I.S
(Time And Relative Tarts In Space)

Maybe try and flash back to factory image first. You can use Odin for clean factory image. You will lose all your personal files but at this point I would start from a fresh new flash.
Sent from my HTC One X using xda premium

[Q] Failed Sprint Note 2 Root Stuck in Loop, Dev not answering

I attempted a root on Samsung Note 2 Sprint version (in white). Followed all steps, however phone got stuck in a reboot loop right after I put the option 2 (root only) Odin step in. Sprint ver LPH889 (I believe that is what Odin is calling it, option 72). Toolkit used was ADB 4.1.0.
Original symptoms were that the Android updater was looping trying to load everything; being new I made it worse and tried recoveries and reloads which also failed. Now it boots, goes to splash, circling blue oval image and...it stays there.
Good news: I have access to download mode and recovery reset mode (including sideloading).
Bad news: every thread I've followed has given me an issue.
I have recovery access but I need some idea of where to go from here and searches have shown near but not exact symptoms. I have unplugged it from the pc, removed the battery, done a factory reset, attempted to reflash via Odin (root) attempted to reflash stock via Odin and so far I am still stuck in a reboot loop. Windows detects the phone but shows a problem in device manager because possibly it won't stop rebooting. Any help you can provide is appreciated and if at all possible I need to recover some form of working phone here, and soon. My girl needs it for work and Sprint's network in my area barely works from day to day (which they admit but don't credit my account for). This phone has problems sending/receiving calls, they claim it's fine, and I was forced to try a root to get some form of working device. That failed too.
I'm a newb at this...it's been years since I flashed a phone (Razor v3), so...any help would be appreciated, otherwise I have to crawl to sprint/samsung and get it replaced, which I don't want to do. Thanks.

doesitwork? said:
I attempted a root on Samsung Note 2 Sprint version (in white). Followed all steps, however phone got stuck in a reboot loop right after I put the option 2 (root only) Odin step in. Sprint ver LPH889 (I believe that is what Odin is calling it, option 72). Toolkit used was ADB 4.1.0.
Original symptoms were that the Android updater was looping trying to load everything; being new I made it worse and tried recoveries and reloads which also failed. Now it boots, goes to splash, circling blue oval image and...it stays there.
Good news: I have access to download mode and recovery reset mode (including sideloading).
Bad news: every thread I've followed has given me an issue.
I have recovery access but I need some idea of where to go from here and searches have shown near but not exact symptoms. I have unplugged it from the pc, removed the battery, done a factory reset, attempted to reflash via Odin (root) attempted to reflash stock via Odin and so far I am still stuck in a reboot loop. Windows detects the phone but shows a problem in device manager because possibly it won't stop rebooting. Any help you can provide is appreciated and if at all possible I need to recover some form of working phone here, and soon. My girl needs it for work and Sprint's network in my area barely works from day to day (which they admit but don't credit my account for). This phone has problems sending/receiving calls, they claim it's fine, and I was forced to try a root to get some form of working device. That failed too.
I'm a newb at this...it's been years since I flashed a phone (Razor v3), so...any help would be appreciated, otherwise I have to crawl to sprint/samsung and get it replaced, which I don't want to do. Thanks.
Click to expand...
Click to collapse
What method are you using to root.....I used the "toolkit" and had no problems at all.
http://forum.xda-developers.com/showthread.php?t=1957155....try this if you haven't already

vel7wil said:
What method are you using to root.....I used the "toolkit" and had no problems at all.
http://forum.xda-developers.com/showthread.php?t=1957155....try this if you haven't already
Click to expand...
Click to collapse
I thought it would to but I did not want to dig through 70+ pages of the thread when searching failed...unless I really needed to. Most of it is old and doesn't apply.
I was directed by the referenced Youtube vid. I used the options referenced for the phone in this thread with that toolkit. I backed up existing files (not as one unit, but internal files and I think OS), went for the option 2, followed the instructions and things went great through odin...until android went to update and started looping with the 'updating files' percentages. At that point I tried to restore to basic and started clearing caches and such and that is how I got to where I am.
When that failed I started looking at the leaked stock flash and that failed on shoot.ini which that guy never addressed because he thought his international version was all versions (that's why I choose 'doesitwork?' as screen name ). So i'm down to sideloading or something. I really need guidance, and I emailed the toolkit author but I'm still waiting on a reply.
Any thoughts?

doesitwork? said:
I thought it would to but I did not want to dig through 70+ pages of the thread when searching failed...unless I really needed to. Most of it is old and doesn't apply.
I was directed by the referenced Youtube vid. I used the options referenced for the phone in this thread with that toolkit. I backed up existing files (not as one unit, but internal files and I think OS), went for the option 2, followed the instructions and things went great through odin...until android went to update and started looping with the 'updating files' percentages. At that point I tried to restore to basic and started clearing caches and such and that is how I got to where I am.
When that failed I started looking at the leaked stock flash and that failed on shoot.ini which that guy never addressed because he thought his international version was all versions (that's why I choose 'doesitwork?' as screen name ). So i'm down to sideloading or something. I really need guidance, and I emailed the toolkit author but I'm still waiting on a reply.
Any thoughts?
Click to expand...
Click to collapse
When used the toolkit a year ago, I found that I had to turned off all firewalls and antivirus apps for it to work properly. Once I did that it worked fine....give it a shot...can't hurt......might even be able to repair what you've done so far.....Good Luck!!!

I'll give this my best shot...download a rooted rom from the development section and place it on your SD card.
Download toolkit from here (I take no credit for this) http://d-h.st/iu0
Put phone in download mode.
Open ODIN and uncheck "auto reboot". Then click "PDA" and add the .tar file (recovery).
Plug phone into PC (make sure to have samsung drivers installed).
Once ODIN sees the phone you can click "start".
When the recovery flash is complete, pull your battery to ensure power down.
Boot into recovery : volume up, home, power all at the same time.
Flash rooted rom.

Toolkit is an extra and unnecessary step.
http://rwilco12.com/downloads.php?d...ung Galaxy Note II (SPH-L900)/Stock ROMs/MC2/
Grab the one click flavor of choice. Use the one with 1090526 in the name as that's the full version.
Open in windows, put phone in download mode and flash. Easy Peasy.
Let me know if you have any issues with this.

Sorry for the late reply, I had some issues with the "catchpa".
The one click fix worked like a charm, thank you! I will soon be making a contrib to the site. It's a shame I couldn't root as easily :laugh: .
I know the level of work that goes into this stuff and the desire to keep on top of new gear while maintaining support for the old and I appreciate the community coming to my aid, so again, thank you!

---------- Post added at 08:14 AM ---------- Previous post was at 07:36 AM ----------
[/COLOR]
doesitwork? said:
Sorry for the late reply, I had some issues with the "catchpa".
The one click fix worked like a charm, thank you! I will soon be making a contrib to the site. It's a shame I couldn't root as easily :laugh: .
I know the level of work that goes into this stuff and the desire to keep on top of new gear while maintaining support for the old and I appreciate the community coming to my aid, so again, thank you!
Click to expand...
Click to collapse
It is usually a pretty common courtesy to hit the "thanks button" when someone helps you out.
I am not at all trying to be mean, just letting you know.

garwynn said:
Toolkit is an extra and unnecessary step.
http://rwilco12.com/downloads.php?d...ung Galaxy Note II (SPH-L900)/Stock ROMs/MC2/
Grab the one click flavor of choice. Use the one with 1090526 in the name as that's the full version.
Open in windows, put phone in download mode and flash. Easy Peasy.
Let me know if you have any issues with this.
Click to expand...
Click to collapse
hello @garwynn im trying to do this same thing.. its been so long since ive odin'd, how would i put TWRP on this now after these steps? i tried goomanager and that didnt work. (couldnt find recovery) and i tried flashing in stock recovery and got a fail . im kind of lost right now and am wondering if there is another way or do i have to do the toolkit? thanks
edit: for some reason, the tool kit links have been pulled by a mod. ..but this video helped me get twrp back. phew. zedomax to the rescue.. http://www.youtube.com/watch?v=7leb9OznhqY

Failed root attempt left tablet at the Samsung screen

I have been searching the forum and google and have been unable to reach a solution yet.
I am not a noob, but i am not an expert either so use small words ha.
I have a Samsung Galaxy Tab 3 10.1 5210 with the most recent OTA update.
Last night I attempted to root my device using this:
androidxda (DOT) com/root-samsung-galaxy-tab-3-10-1-gt-p5210
It claimed successful and my device started to reboot and hung up at the Samsung GALAXY TAB 3 screen. I am unable to get to recovery mode on the device. Only able to go to download mode. I have tried several options but have been unable to find a way to flash it successfully. The flashes i have tried downloading were all in .zip and that obviously isn't able to be used in Odin. I have researched how to convert the files into a .tar but I don't have linux. Can someone please help me because I need my tablet. I know it can be saved but I can't seem to locate the answers. I am also getting concerned that it is unable to charge the battery being in the condition it is in now so I am trying to conserve the battery on the tablet until it is absolutely needed. Thanks.

cameron72 said:
I have been searching the forum and google and have been unable to reach a solution yet.
I am not a noob, but i am not an expert either so use small words ha.
I have a Samsung Galaxy Tab 3 10.1 5210 with the most recent OTA update.
Last night I attempted to root my device using this:
androidxda (DOT) com/root-samsung-galaxy-tab-3-10-1-gt-p5210
It claimed successful and my device started to reboot and hung up at the Samsung GALAXY TAB 3 screen. I am unable to get to recovery mode on the device. Only able to go to download mode. I have tried several options but have been unable to find a way to flash it successfully. The flashes i have tried downloading were all in .zip and that obviously isn't able to be used in Odin. I have researched how to convert the files into a .tar but I don't have linux. Can someone please help me because I need my tablet. I know it can be saved but I can't seem to locate the answers. I am also getting concerned that it is unable to charge the battery being in the condition it is in now so I am trying to conserve the battery on the tablet until it is absolutely needed. Thanks.
Click to expand...
Click to collapse
First of all - Welcome to xda
Your tab is soft bricked, something has gone wrong with your system files... Honestly it seems like you know enough to get it done, but are struggling a bit with the file formats. You are correct in saying that Odin won't use zip files, but you shouldn't have to convert anything to tar or download linux! If you extract the zip files, you should find a .tar or .tar.md5 file (inside the zip file) that Odin can use, put it in the PDA mode box, etc etc... If your downloads don't have the correct files inside them, try THIS thread.
Let me know if you get it sorted :good:

bob23bk said:
First of all - Welcome to xda
Your tab is soft bricked, something has gone wrong with your system files... Honestly it seems like you know enough to get it done, but are struggling a bit with the file formats. You are correct in saying that Odin won't use zip files, but you shouldn't have to convert anything to tar or download linux! If you extract the zip files, you should find a .tar or .tar.md5 file (inside the zip file) that Odin can use, put it in the PDA mode box, etc etc... If your downloads don't have the correct files inside them, try THIS thread.
Let me know if you get it sorted :good:
Click to expand...
Click to collapse
I had already tried the method and file in the forum you linked me to. It failed almost instantly. That's when I turned everything off and tossed it all to the back seat of my work truck before it got thrown at the windshield. I keep seeing people saying they have trwp or whatever. I don't even know what that is haven't researched that. Is it something i need as well?
I've never successfully rooted a Samsung device. I used to do this stuff a lot back with the droid x with Linux and everything was pretty simple. Does Samsung change their bootloader with each update like Motorola did then? I was wondering that when trying to install a firmware of a previous version that maybe that was the problem.
All I wanted root for was to just tweak some things and be happy. It has turned into a nightmare.

C,
hi,
the consistent/common thread of this problem is/seems to be taking the ota and trying unverified/gimmicky
root methods.
there are recoveries for the gt-p52xx in the tab 10.1 forum
the majority of samsung devices root as follows;
if a custom recovery exist, flash it.
then download recent or latest version of chainfire's supersu update zip, reboot to recovery
backup your rom first, then flash supersu, if everything goes well, once you have set up your stock rom with root in place
make a new backup.
samsung ota's are death incarnate, reject them.
goto the tab 10 forum and get busy ! you said it yourself, you're not a noob, you know the drill. :good:
m

moonbutt74 said:
C,
hi,
the consistent/common thread of this problem is/seems to be taking the ota and trying unverified/gimmicky
root methods.
there are recoveries for the gt-p52xx in the tab 10.1 forum
the majority of samsung devices root as follows;
if a custom recovery exist, flash it.
then download recent or latest version of chainfire's supersu update zip, reboot to recovery
backup your rom first, then flash supersu, if everything goes well, once you have set up your stock rom with root in place
make a new backup.
samsung ota's are death incarnate, reject them.
goto the tab 10 forum and get busy ! you said it yourself, you're not a noob, you know the drill. :good:
m
Click to expand...
Click to collapse
I have tried the recoveries in the forum and it failed seconds after starting.
I don't do this stuff regularly as I don't hardly have the time. I haven't done anything of this nature in years so I'm well out of the loop on things..

cameron72 said:
I have tried the recoveries in the forum and it failed seconds after starting.
I don't do this stuff regularly as I don't hardly have the time. I haven't done anything of this nature in years so I'm well out of the loop on things..
Click to expand...
Click to collapse
okay, hmm, when you say it fails, do you mean odin fails to flash and if so what is the reason/ouput ?
or do you mean that you are now in a recovery bootloop ?
note- though i go the full route of packing recovery.img's for odin flashing, the md5 checksum always seems to
come up as invalid, the working "remedy" is to remove the .md5 extension from the "odin-flashable-recovery".tar.md5 file
by renaming the file to "odin-flashable-recovery".tar
odin will no longer attempt the checksum verification but the recovery file will flash.
make sure you have samsung-usb-drivers for windows installed. on the main page of my devhost archive [link is in my signature]
you will find the tools you need. the possible problem is that the ota you installed may have overwritten your bootloader, for that i don't
have a reliable fix, so if anything make sure you also have the stock recovery ready to go as well as supersu update zip
already downloaded onto your device for rooting.
after you flash the custom recovery [with auto-restart in odin disabled] run the flash and wait for the res-ok message, give it another second or two then disconnect the tab and force reboot to recovery, home,vol-up and power, once in recovery make a full backup, then flash supersu zip and reboot, if you do go into recovery loop, force reboot to odin mode, home,vol-down and power, follow the on screen instruction, now reconnect your tab to pc and use odin to flash back stock recovery.
m

Okay guys I appreciate the help. I finally got it. I tried the method on Zachisimo's post on unbricking and finally got it installed.
After it installed, it left me with a bootloop and I was actually able to go into recovery mode this time and do a factory data reset and wipe cache then everything went well. I am a happy dude now.
Going to attempt rooting it again and does anyone have any suggestions on what ROM to install? I have never used any custom ROM's before so that is a new area for me. Feeling more confident knowing how to save it from the dead. :good::good::good:

cameron72 said:
Okay guys I appreciate the help. I finally got it. I tried the method on Zachisimo's post on unbricking and finally got it installed.
After it installed, it left me with a bootloop and I was actually able to go into recovery mode this time and do a factory data reset and wipe cache then everything went well. I am a happy dude now.
Going to attempt rooting it again and does anyone have any suggestions on what ROM to install? I have never used any custom ROM's before so that is a new area for me. Feeling more confident knowing how to save it from the dead. :good::good::good:
Click to expand...
Click to collapse
Hi,
Alright !'m glad you got it working, as to roms , all available roms currently are stock modifications , I use cag-rom, there's also pimp-droid
both kitkat.
m

moonbutt74 said:
Hi,
Alright !'m glad you got it working, as to roms , all available roms currently are stock modifications , I use cag-rom, there's also pimp-droid
both kitkat.
m
Click to expand...
Click to collapse
If you use it then thats what i shall try. First i gotta find a root, then I have seen many people recommend philz recovery, and then the rom?
question why does Restl3ss say wait 10minutes after installing a rom before doing anything?

cameron72 said:
If you use it then thats what i shall try. First i gotta find a root, then I have seen many people recommend philz recovery, and then the rom?
question why does Restl3ss say wait 10minutes after installing a rom before doing anything?
Click to expand...
Click to collapse
for root look up supersu update zip
ask Restl3ss :silly:
m

cameron72 said:
Okay guys I appreciate the help. I finally got it. I tried the method on Zachisimo's post on unbricking and finally got it installed.
After it installed, it left me with a bootloop and I was actually able to go into recovery mode this time and do a factory data reset and wipe cache then everything went well. I am a happy dude now.
Going to attempt rooting it again and does anyone have any suggestions on what ROM to install? I have never used any custom ROM's before so that is a new area for me. Feeling more confident knowing how to save it from the dead. :good::good::good:
Click to expand...
Click to collapse
Glad it worked out, recovering from brick does set you free from the stress induced by the disclaimers imo :silly:

SPH-L520 NJ1 update question

I have obtained a Sprint s4 mini. From what I can find, the current kernel is SE secure enforcing.
The exact build number is KOT49H.L520_4.4.2_0016
Build date is Oct 7 2014
I am not new here, I know that all known root methods are now bust. What other options are there?
Searching seems to be pretty difficult for this device. All searches for bootloader and recovery come up for the i9190 / i9195
If I use Kies or Odin to flash a previous recovery image, will that brick the device? Also in the settings, it says Secure Boot Status - Type: Samsung
Guess that is referring to the Knox enforcing
The particular image I had in mind to flash with Odin is SPR-L520VPUAMK2-20131115204826
Will it work? Or am I screwed?

Well no one was able to answer my question, so I had to figure it out on my own. Hopefully the following information will be of help to someone else without spending 36+ hours digging through the internet for answers.
You CAN fix your phone it you are on the NJ1 kernel. This is NOT a guide to fixing a bricked phone, although it may fix that too.
If you are on the NJ1 kernel, there are no root methods currently available. You MUST be on NE3 or lower. I also attempted to flash the custom recovery through Odin, but after a reboot it was as if I did nothing. No Knox flag, no warranty trip, no custom recovery.
Here is what I did to get custom recovery and root:
READ THIS BEFORE ATTEMPTING STEP 1.
This is only for the Sprint variant of the S4 Mini. Model number SPH-L520
Your Warranty could be voided. Proceed if you like. (More info on steps 5 and 6)
I had a horrible time getting the downloads from Sammobile. You WILL have to create an account and login to download files. I could not find any working links for the firmware below except for this site. Register a user name and password, DO NOT UNCHECK THE BOX that says receive emails from Sammobile OR YOU WILL NOT GET YOUR REGISTRATION EMAIL. On the Register page it is at the bottom. After you register, check your email and click on the link to complete the registration.
Close all your windows that are open to sammobile.
You are going to want to download Internet Download Manager in order to download files from Sammobile. After many many attempts to download the firmware from Sammobile, all tries failed. YOU ARE GOING TO NEED IDM to get a reliable download.
Download IDM ---> https://www.internetdownloadmanager.com/download.html
Install it and follow these directions to enable resume downloads in IDM ---> http://forum.xda-developers.com/showthread.php?t=2765456
If you do not do the steps above, you most likely will have failed download after failed download.
Even after setting this up, the firmware download failed on me twice. I deleted it from the download list in IDM and started it again.
IDM integrates well with Internet Explorer. Kinda buggy with Chrome. I would suggest using IE for the rest of this Tutorial.
Ok, now that you have that squared away, move on to step 1
_________________________________________________________________________________________________________________________
1) Flash your phone back to NE3. You can get that here ---> http://www.sammobile.com/firmwares/download/31482/L520VPUBNE3_L520SPTBNE3_SPR/ (click Regular Download, then on new page right-click Confirm Download and click SAVE AS. After that the IDM window should pop up. Just Start Download)
Also go ahead and download download the NJ1 in case things get rough. List of all firmwares here ---> http://www.sammobile.com/firmwares/database/SPH-L520/
2) Download and install the Samsung drivers ---> http://www.mediafire.com/download/a4hd8y0c1iakysk/Samsung-Usb-Driver-v1.5.49.0.exe
Download Odin 3.09 ---> http://androidhost.org/PVAIv
Unzip Odin to a folder or desktop. Do not run it from in the zip folder.
3) Run Odin 3.09.
Reboot your S4 Mini SPH-L520 into download mode. Turn phone off > Hold Volume Down, Home Button, and Power Button all at the same time. Wait for the phone to buzz and the pop up on the screen. Release the buttons and press Volume Up to confirm.
Now plug in your phone to your computer. It might take a few seconds for the drivers to install. Wait until Odin shows blue color in the first bar on the left side. Should say 0:[COM3] (the COM number will be different depending on your computer and the USB port you plugged it into)
VERY VERY IMPORTANT! Make sure that the AUTO-REBOOT and F. RESET TIME boxes ARE checked. Make sure that the RE-PARTITION box is NOT checked.
4) Unzip the NE3 download from earlier. Click on the AP button in Odin and navigate to where you unzipped NE3. It should be a .MD5 type of file
Give Odin a few mins to check the file. It may appear that Odin has hung up, just be patient.
After Odin has run the check, it should say ok in the little window on the bottom left. Now click START and wait.
DO NOT bump the phone, the laptop, the usb cord, and MAKE SURE THE BATTERY DOES NOT FALL OUT!!!
After Odin is done flashing, it will reboot the phone. After the initial reboot, the phone will reboot itself once more. Be patient
Now wait for the phone to completely boot up.
5) After you have got back to ME3, you can follow this guide to root it ---> http://androidxda.com/root-samsung-galaxy-s4-mini-sprint-sph-l520
You already have most of the files you need. Just follow the instructions and download what you do not have already.
By the way, in Odin the AP button and the PDA button are the same
(This method should not trip the Knox counter, but I am unsure. Mine was already tripped before all of this)
OPTIONAL (this will trip the Knox counter and lose warranty status)
6) Now you can use this guide to install the custom recovery ---> http://techbeasts.com/2014/05/04/in...-root-sprint-samsung-galaxy-s4-mini-sph-l520/
Again, you already have most of the files you need. DL what you don't have.
_________________________________________________________________________________________________________________________
I am planning on instaling CM11 ---> http://forum.xda-developers.com/showthread.php?t=2669991
This ROM apparently needs a specific recovery in order to work properly. I installed that one instead.
MAKE A BACKUP IN THE RECOVERY OF THE STOCK ROM BEFORE FLASHING ANY CUSTOM ROMS, or else be sorry later.
This is about as simplified as I could get it. Hope this helps out those of you that were as confused as I was.
I will not be providing support. Simply do not have the time. There is more than enough info here to help you figure out what to do.

fire3element said:
I have obtained a Sprint s4 mini. From what I can find, the current kernel is SE secure enforcing.
The exact build number is KOT49H.L520_4.4.2_0016
Build date is Oct 7 2014
I am not new here, I know that all known root methods are now bust. What other options are there?
Searching seems to be pretty difficult for this device. All searches for bootloader and recovery come up for the i9190 / i9195
If I use Kies or Odin to flash a previous recovery image, will that brick the device? Also in the settings, it says Secure Boot Status - Type: Samsung
Guess that is referring to the Knox enforcing
The particular image I had in mind to flash with Odin is SPR-L520VPUAMK2-20131115204826
Will it work? Or am I screwed?
Click to expand...
Click to collapse
Can you help me to backup your first partition on your phone and send to me. You can use EFS Professional on xda.

Hmm....I installed the NJ1 update through Odin. And then flashed the CF auto root (or maybe it was the recovery.tar) with no issues. I did this when NJ1 was first released.

NCTP2 said:
Hmm....I installed the NJ1 update through Odin. And then flashed the CF auto root (or maybe it was the recovery.tar) with no issues. I did this when NJ1 was first released.
Click to expand...
Click to collapse
Can you backup your phone by EFS Pro and send to me. Thanks.

NCTP2 said:
Hmm....I installed the NJ1 update through Odin. And then flashed the CF auto root (or maybe it was the recovery.tar) with no issues. I did this when NJ1 was first released.
Click to expand...
Click to collapse
I was unsure about it considering all the changes with SE Secure and Knox. Always pays to be safer than sorry. I could not find any reports of this anywhere after hours of reading and searching. Thanks for confirming though. :good:
quanqw said:
Can you backup your phone by EFS Pro and send to me. Thanks.
Click to expand...
Click to collapse
I am sorry, I have been really busy. What exactly are you trying to do? Asking someone to backup sensitive data from their phone and share it to a stranger can be alarming.
At least tell us what is going on or why you need the backup.

worked
fire3element said:
I was unsure about it considering all the changes with SE Secure and Knox. Always pays to be safer than sorry. I could not find any reports of this anywhere after hours of reading and searching. Thanks for confirming though. :good:
I am sorry, I have been really busy. What exactly are you trying to do? Asking someone to backup sensitive data from their phone and share it to a stranger can be alarming.
At least tell us what is going on or why you need the backup.
Click to expand...
Click to collapse
thanks alot
the baseband nearly killed me but i thanked my God for you. it worked for me
my question is, is there any way to get it work for domestic sim outside USA?