Hi
How to install Stock Android on Huawei Ascend P6 ?
Thnx
Wrong section dude.
B2T atm no Stock Android (AOSP) is out yet. That guy who planed a cyogen for P6 just closed the thread and leaved
I believe system/apps folder and framework and certain other folders can be replaced with the AOSP ones in the rom, and this should not require a new kernel or anything.
edit: eg. using the EMUI 4.2.2 B122 as base in this guide http://forum.xda-developers.com/showthread.php?t=1908008
Would it work?
tauio111 said:
I believe system/apps folder and framework and certain other folders can be replaced with the AOSP ones, and this should not require a new kernel or anything.
Click to expand...
Click to collapse
all i hope .
Sent from my HUAWEI P6-U06 using Tapatalk
tauio111 said:
I believe system/apps folder and framework and certain other folders can be replaced with the AOSP ones in the rom, and this should not require a new kernel or anything.
edit: eg. using the EMUI 4.2.2 B122 as base in this guide http://forum.xda-developers.com/showthread.php?t=1908008
Would it work?
Click to expand...
Click to collapse
I would try today if i've time. Or has somebody already started?
I don't really belive that this could work, but if anyone would like to test, I can upload a rom which is "ported" like this
tauio1117 said:
edit: eg. using the EMUI 4.2.2 B122 as base in this guide http://forum.xda-developers.com/show....php?t=1908008
Would it work?
Click to expand...
Click to collapse
No.
Take any clean CM9, AOSP, CM7, CM10 ROM which is running on your device as Base ROM.
Click to expand...
Click to collapse
Is Huawei's ROM CM / AOSP ?
NO
By the Way its more difficult to Patch Goldfish Android compare to normal "ports"
PulseDroid said:
No.
Is Huawei's ROM CM / AOSP ?
NO
Click to expand...
Click to collapse
Why does it need CM/AOSP as base? MIUI seems to be completely fine on emui base, if a little laggy
If you want to try a build, ported with the tutorial,
try this :
https://www.dropbox.com/s/oqnj80wmgmesxeq/P6-Baido-based-CM-4.2.2-Kitkat-look-pre-pre-alpha.zip
... I dont belive that it will boot, I didn't tryed .. and ... if your phone breaks, if've warned you
I used Baidu: http://forum.xda-developers.com/showthread.php?t=2511276 as base and "ported" with this rom : http://forum.xda-developers.com/showthread.php?t=2173159
.. tell me if it does anything ^^
raolleel said:
If you want to try a build, ported with the tutorial,
try this :
https://www.dropbox.com/s/oqnj80wmgmesxeq/P6-Baido-based-CM-4.2.2-Kitkat-look-pre-pre-alpha.zip
... I dont belive that it will boot, I didn't tryed .. and ... if your phone breaks, if've warned you
I used Baidu: http://forum.xda-developers.com/showthread.php?t=2511276 as base and "ported" with this rom : http://forum.xda-developers.com/showthread.php?t=2173159
.. tell me if it does anything ^^
Click to expand...
Click to collapse
U8800 is not xhdpi, it may bug out or not work at all. Using the Nexus 4 aokp/aosp rom for porting files would have been a better choice.
edit: the zip file should not have a folder inside of it, the meta-inf and system folder should be in the root of the zip
Actually interesting for development, Cyanogenmod does not require a custom kernel!!
Proof: http://www.eternityproject.eu/topic/1107358-eternityprojects-cyanogenmod-101-for-huawei-honor-2/
I've already spoken to XDA member kholk in regards to this, if you analyze his ROM he does not include a kernel. Their using the method that we use due to the same limitations, as you can see the thread directs users to flash Huawei's 4.2.1 base ROM.
So it's completely feasible the P6 can obtain a stock like CM rom. I'm going to get in touch with Kholk regarding this once more.
Stickman89 said:
Actually interesting for development, Cyanogenmod does not require a custom kernel!!
Proof: http://www.eternityproject.eu/topic/1107358-eternityprojects-cyanogenmod-101-for-huawei-honor-2/
I've already spoken to XDA member kholk in regards to this, if you analyze his ROM he does not include a kernel. Their using the method that we use due to the same limitations, as you can see the thread directs users to flash Huawei's 4.2.1 base ROM.
So it's completely feasible the P6 can obtain a stock like CM rom. I'm going to get in touch with Kholk regarding this once more.
Click to expand...
Click to collapse
Honor 2 has the same chipset as P6 does. If he got it working on it, then theres no possible reason why we should be able to port this to B122
tauio111 said:
Honor 2 has the same chipset as P6 does. If he got it working on it, then theres no possible reason why we should not on the P6.
Click to expand...
Click to collapse
Ahhh this is what I've been trying to tell everybody for ages ahaha :<> Their obviously running an entirely different base (4.1.2) which as you know we do not have, so porting isn't as straight forward as you'd of liked.
Stickman89 said:
Ahhh this is what I've been trying to tell everybody for ages ahaha :<> Their obviously running an entirely different base (4.1.2) which as you know we do not have, so porting isn't as straight forward as you'd of liked.
Click to expand...
Click to collapse
Since were running 4.2.2, we should take the files from CM10.1 4.2.2. We could also check out the zip file of that rom to see which files he has modified/left/copied etc by sorting them by Date Modified.
edit: did some research on modification date and found out that this wont help us at all.
Code:
Modified files:
---system\usr---------
\srec\config\en.us\dictionary\cmu6plus.ok.zip 5.10.2013 16:39
\share\zoneinfo\zoneinfo.version 5.10.2013 16:39
---system\media------
\bootanimation.zip 5.10.2013 16:39
---system\lib----------
\egl\egl.cfg 5.10.2013 16:39
---system\etc--------
\.has_su_daemon 5.10.2013 16:39
\security\otacerts.zip 5.10.2013 16:39
\bash\bash_logout 5.10.2013 16:39
Everything other being modified on 29.02.2008 3:33
??
tauio111 said:
Why does it need CM/AOSP as base? MIUI seems to be completely fine on emui base, if a little laggy
Click to expand...
Click to collapse
It uses MIUI Patch ROM Project.
Think of it this way: Huawei's stock is basically based on AOSP. - Basing AOSP on it isn't really possible is it? You could strip down your ROM and port a few apps / libs. But stuff like settings.apk will be difficult.
---------- Post added at 05:37 PM ---------- Previous post was at 05:35 PM ----------
Stickman89 said:
Actually interesting for development, Cyanogenmod does not require a custom kernel!!
Proof: http://www.eternityproject.eu/topic/1107358-eternityprojects-cyanogenmod-101-for-huawei-honor-2/
I've already spoken to XDA member kholk in regards to this, if you analyze his ROM he does not include a kernel. Their using the method that we use due to the same limitations, as you can see the thread directs users to flash Huawei's 4.2.1 base ROM.
So it's completely feasible the P6 can obtain a stock like CM rom. I'm going to get in touch with Kholk regarding this once more.
Click to expand...
Click to collapse
Yep, making a generic build and using pre-built kernel should work ( with lots of bugs of course ). - I got it to the bootanimation, trying to get it to boot.
Last time I compiled was CM7 My internet is so slow!
PulseDroid said:
It uses MIUI Patch ROM Project.
Think of it this way: Huawei's stock is basically based on AOSP. - Basing AOSP on it isn't really possible is it? You could strip down your ROM and port a few apps / libs. But stuff like settings.apk will be difficult.
---------- Post added at 05:37 PM ---------- Previous post was at 05:35 PM ----------
Yep, making a generic build and using pre-built kernel should work ( with lots of bugs of course ). - I got it to the bootanimation, trying to get it to boot.
Last time I compiled was CM7 My internet is so slow!
Click to expand...
Click to collapse
Can you produce a logcat? I'll give you a help in hand.
Stickman89 said:
Can you produce a logcat? I'll give you a help in hand.
Click to expand...
Click to collapse
Got G+ / FB ?
wish you guys all the best :good::good:
I'm try to boot in Eternity CM, too.
But no luck for me either..
Related
I spent the entire day yesterday trying to make Android Revolution HD work on my I317. At the end of the day, success ! and here is how:
Please do not experiment with this stuff if you're not familiar with partitions and the way things work. You do run the risk of bricking your device permanently if you don't know what you're doing. I'll write this so that developers can start porting their ROMs to the LTE variants.
The two devices are identical except for the modem (and rild files) and the GPS initialization at bootup.
1. You'll need to rewrite the updater-script in most CWM flashable ROMs to make sure.. again, MAKE SURE that you do not flash anything else except /system /data and the boot partition. Overwriting your modem partition with a modem from the N7100 phone or the bootloader partitions will blow up your phone. You've been warned ! The partition labels and numbers are identical so you won't have to change that.
2. Make sure you bundle a kernel (boot.img) from one of I317/N7105 (depending on which device you own). Obviously we're talking about TW kernels here so for example stock JB kernels or Perseus will do just fine. Do not flash boot.img kernels from the N7100 section.
3. You'll need to add and remove a bunch of userland library files from your device. I won't attach these files here but you can grab them from any I317/N7105 ROM:
Files to ADD/REPLACE (Yes, every single one counts as they're dynamically linked). The stuff in /system/bin are started by the initramfs in the kernel so add them all in as well:
Code:
./system
./system/bin
./system/bin/qcks
./system/bin/sec-ril
./system/bin/qmuxd
./system/bin/efsks
./system/bin/diag_uart_log
./system/bin/netmgrd
./system/bin/gsiff_daemon
./system/bin/ks
./system/bin/rild
./system/bin/qmiproxy
./system/bin/secstarter
./system/etc
./system/etc/gps.conf
./system/lib
./system/lib/hw
./system/lib/hw/audio.primary.smdk4x12.so
./system/lib/hw/gps.default.so
./system/lib/hw/audio_policy.smdk4x12.so
./system/lib/libril-qc-qmi-1.so
./system/lib/libnetmgr.so
./system/lib/libaudio-ril.so
./system/lib/libloc_api_v02.so
./system/lib/libril-qcril-hook-oem.so
./system/lib/libqdp.so
./system/lib/libdsutils.so
./system/lib/libqmiservices.so
./system/lib/libqmi_client_qmux.so
./system/lib/libloc_adapter.so
./system/lib/libqmi_common_so.so
./system/lib/libqdi.so
./system/lib/libqmi.so
./system/lib/libcsd-client.so
./system/lib/libloc_eng.so
./system/lib/libqmi_encdec.so
./system/lib/libqcci_legacy.so
./system/lib/libqmi_cci.so
./system/lib/libssaudio-client.so
./system/lib/libidl.so
./system/lib/libril.so
./system/lib/libqmi_csi.so
./system/lib/libdiag.so
./system/lib/libdsi_netctrl.so
./system/lib/libgps.utils.so
./system/lib/libgps.so
To remove !!! Moi importante !
Code:
./system/lib/hw/gps.exynos4.so
If you don't remove that GPS exynos4 file, HAL will load it and never the gps.default.so file so your gps won't work. Took me three friggin hours to figure out.
4. Lastly, you'll need to change build.prop so that it loads our RILD files instead of the N7100's:
Code:
replace
rild.libpath=/system/lib/libsec-ril.so
with
rild.libpath=/system/lib/libril-qc-qmi-1.so
5. ???
6. Profit.
When I get sometime, I'll try to port CM10 from the N7100 tree. Done.
im going to try this I hope it works thanks
drakeymcmb said:
im going to try this I hope it works thanks
Click to expand...
Click to collapse
well, attached is what I'm seeing on my phone now
does signal and lte work ?
---------- Post added at 03:49 PM ---------- Previous post was at 03:46 PM ----------
can u please upload the ported android revolution thanks
this is good news to alot of 7105 users
thank u. from the bottom of my heart heh!
drakeymcmb said:
does signal and lte work ?
---------- Post added at 03:49 PM ---------- Previous post was at 03:46 PM ----------
can u please upload the ported android revolution thanks
Click to expand...
Click to collapse
LTE works. Si senior. Shows as proper "4G" on top.
I'm not going to upload it because I'm too lazy to ask for his permission. silly i know
il ask for u and then u can upload it but does calling work like can u call your voicemail ? and thanks so much me gusta lol
Thanks for this...are you looking at porting over imilka's CM10 build?
my day just got better
dammit.. phone call goes through but I can't hear anything!!
Lemme see if I can fix that.
madmack said:
dammit.. phone call goes through but I can't hear anything!!
Lemme see if I can fix that.
Click to expand...
Click to collapse
This is truly a breakthrough if you can get everything to work!!! Am really excited.
MonsterBandit said:
Thanks for this...are you looking at porting over imilka's CM10 build?
my day just got better
Click to expand...
Click to collapse
I don't think that will be possible until we have an cm10 kernel built for our device first, can't switch in a TW kernel for their cm10 kernel without possibly bricking our phones
And to the OP of this thread:
Great work man, I know they were having a little trouble getting the roms to port on our IRC channel, hopefully this opens the flood gates for more rom possibilities :good:
MonsterBandit said:
Thanks for this...are you looking at porting over imilka's CM10 build?
my day just got better
Click to expand...
Click to collapse
mjwhirly said:
I don't think that will be possible until we have an cm10 kernel built for our device first, can't switch in a TW kernel for their cm10 kernel without possibly bricking our phones
And to the OP of this thread:
Great work man, I know they were having a little trouble getting the roms to port on our IRC channel, hopefully this opens the flood gates for more rom possibilities :good:
Click to expand...
Click to collapse
I'm going to port the standard CM10 that is available at github.com/cyanogenmod Once this is completed, then we can incorporate that to all AOSP based roms.
The kernels are actually pretty close to each other. (have a look at the defconf for details). What's different is the initramfs and the userland binaries/libraries. I'll have a look at it but I need to get this audio going on TW roms first.
mjwhirly said:
I don't think that will be possible until we have an cm10 kernel built for our device first, can't switch in a TW kernel for their cm10 kernel without possibly bricking our phones
And to the OP of this thread:
Great work man, I know they were having a little trouble getting the roms to port on our IRC channel, hopefully this opens the flood gates for more rom possibilities :good:
Click to expand...
Click to collapse
Thats, what I thought, but he said he was gunna try CM10...I've been trying to learn more about Kernels all morning, and I understand we have a Qualcomm modem, but idk what would be needed to build a kernel for say CM...any thoughts?
Sorry for the OT OP.
---------- Post added at 10:30 AM ---------- Previous post was at 10:29 AM ----------
madmack said:
I'm going to port the standard CM10 that is available at github.com/cyanogenmod Once this is completed, then we can incorporate that to all AOSP based roms.
The kernels are actually pretty close to each others. (have a look at the defconf for details). What's different is the initramfs and the userland binaries/libraries. I'll have a look at it but I need to get this audio going on TW roms first.
Click to expand...
Click to collapse
awesome...I'm very new to the development world, and I'm learning as much as I can to be able to help and maybe dev my own stuff
Audio phone calls work
PHONE CALLS..
FIXED
HOW U LIKE DEM APPLES amigos
lemme update the OP.
edit: done. OP's list of files to add/replace is updated to reflect this change. basically a bunch of libaudio* files and their dependencies.
madmack said:
PHONE CALLS..
FIXED
HOW U LIKE DEM APPLES amigos
lemme update the OP.
edit: done. OP's list of files to add/replace is updated to reflect this change. basically a bunch of libaudio* files and their dependencies.
Click to expand...
Click to collapse
Damn man you work too quickly, at this rate we should have CM10 in like 2 hours
mjwhirly said:
Damn man you work too quickly, at this rate we should have CM10 in like 2 hours
Click to expand...
Click to collapse
lol. it'll be a while til we get CM10 running. I've just quickly looked at the differences and have an idea where to go from here but that's about it.
It all depends on how much free time I get here at work.
Madmack, you sir are a freaking genius. Now I'm glad I didn't get the international version cause I have lte in my area. Can't wait for more ported roms and aosp goodness. Thank you sir!
Sent from my SAMSUNG-SGH-I317 using xda premium
./system/bin/secstarter
I can't find it in N7105 LJ4 Rom
deadman12 said:
./system/bin/secstarter
I can't find it in N7105 LJ4 Rom
Click to expand...
Click to collapse
I actually pulled it from a N7105 LJ4 Rom. Download the stock LJ4 ROM, it should include it. If not, well, then don't add it and see what happens.
madmack said:
lol. it'll be a while til we get CM10 running. I've just quickly looked at the differences and have an idea where to go from here but that's about it.
It all depends on how much free time I get here at work.
Click to expand...
Click to collapse
I'll gladly set up a Google Code Page for you...I'll do the same thing I did for randomblame and his original Jellytime Project...link to that project page is in my sig.
I found a nice ROM (v4.1.2) on my local forum and I would like to share it.
ROM(without kernel)
recommended kernel
The ROM is based on this one
Unlocked bootloader required for the ROM.
This rom is something, along with the recommended kernel... I'm impressed!!!
Though there some settings/languages I don't understand, the rom as a whole is awesome and smooth...
The devs should come here at XDA...
I'm glad I tried this rom...
Thanks for this mate!
teddy0209 said:
This rom is something, along with the recommended kernel... I'm impressed!!!
Though there some settings/languages I don't understand, the rom as a whole is awesome and smooth...
The devs should come here at XDA...
I'm glad I tried this rom...
Thanks for this mate!
Click to expand...
Click to collapse
is this rom have english or arabic language ?? any bugs other ??
can we use this kernel with stock rom ?
teddy0209 said:
This rom is something, along with the recommended kernel... I'm impressed!!!
Though there some settings/languages I don't understand, the rom as a whole is awesome and smooth...
The devs should come here at XDA...
I'm glad I tried this rom...
Thanks for this mate!
Click to expand...
Click to collapse
Mahmoud Halem said:
is this rom have english or arabic language ?? any bugs other ??
can we use this kernel with stock rom ?
Click to expand...
Click to collapse
AFAIK it is originally a Chinese ROM which was somehow adapted for our device by one Russian guy. His nickname is
eclip). So I guess a part of settings/languages you don't understand simply might be in Russian or Chinese language.
I dont know about whether the kernel is compatible with the stock rom or not but it definitely has cwm recovery.
So you can always flash another kernel from recovery mode (press vol+ after reboot) if something goes wrong with it.
There is a new version of the ROM and I am waiting for permission from the author to share a link here.
Mahmoud Halem said:
is this rom have english or arabic language ?? any bugs other ??
can we use this kernel with stock rom ?
Click to expand...
Click to collapse
It should be compatible...
Haven't found any bugs, this is just my second day running it...
---------- Post added at 01:48 AM ---------- Previous post was at 01:37 AM ----------
dkd said:
AFAIK it is originally a Chinese ROM which was somehow adapted for our device by one Russian guy. His nickname is
eclip). So I guess a part of settings/languages you don't understand simply might be in Russian or Chinese language.
I dont know about whether the kernel is compatible with the stock rom or not but it definitely has cwm recovery.
So you can always flash another kernel from recovery mode (press vol+ after reboot) if something goes wrong with it.
There is a new version of the ROM and I am waiting for permission from the author to share a link here.
Click to expand...
Click to collapse
Kernel also has miui recovery, don't know what it's based...
The Chinese site/forum has lots of roms for our Acro S, they're more active...
(Rom is fully functional, I could care less about the characters I don't understand. Gonna stay with it for awhile...
Edit:
Waiting for the new rom's link =)
Edit2:
Turns out the kernel has twrp too, using camera key for access...
Found the russian forum =)
Hello everyone, i'm eclip from 4pda (can't create my own name couse it's already in use by some one,had to use my old. here is the fix for of settings.apk that convert chineese sybmols into normal english. download
By the way dkd i'm not from russia, i'm from ukraine
radiocity966 said:
Hello everyone, i'm eclip from 4pda (can't create my own name couse it's already in use by some one,had to use my old. here is the fix for of settings.apk that convert chineese sybmols into normal english. download
By the way dkd i'm not from russia, i'm from ukraine
Click to expand...
Click to collapse
So is there an updated version of the rom like dkd said?
Or the changes are just on the settings.apk?
teddy0209 said:
So is there an updated version of the rom like dkd said?
Or the changes are just on the settings.apk?
Click to expand...
Click to collapse
in the link i post there is only a changes in settings.apk you need to put it into system/app with rwrr . There is no update of this rom in our forum, only new adapted rom from chineese devs.
radiocity966 said:
in the link i post there is only a changes in settings.apk you need to put it into system/app with rwrr . There is no update of this rom in our forum, only new adapted rom from chineese devs.
Click to expand...
Click to collapse
Okay.. Thanks for the reply!!! =)
Edit:
Is this rom EXR_ZT_LT26iv4_port.zip for Acro S also?
and this EXR_ZT_FOR LT26W_v4?
Sorry for asking a lot!! =)
radiocity966 said:
by the way dkd i'm not from russia, i'm from ukraine
Click to expand...
Click to collapse
Sorry mate. Its hard to distinguish when we speak the same language. I thought a "EXR.Wisteria" was an update.
EXR_ZT_FOR LT26W_v4 = EXR.Wisteria(translated from chineese) but it is not an update for EXR.Cheney
radiocity966 said:
EXR_ZT_FOR LT26W_v4 = EXR.Wisteria(translated from chineese) but it is not an update for EXR.Cheney
Click to expand...
Click to collapse
Who tells the difference in these Chinese stuffs?:cyclops: So let guys choose which one is better! With your kind permission
EXR.Wisteria.Eclip_mod
anyway after installing wisteria rom need to download settings.apk from previous page and move it to system/app with rwrr rights
dkd said:
Who tells the difference in these Chinese stuffs?:cyclops: So let guys choose which one is better! With your kind permission
EXR.Wisteria.Eclip_mod
Click to expand...
Click to collapse
Is this rom for Acro S?
I downloaded it from 4pda but i was confused by the file name so haven't tried to install it yet...
teddy0209 said:
Is this rom for Acro S?
I downloaded it from 4pda but i was confused by the file name so haven't tried to install it yet...
Click to expand...
Click to collapse
I presume definitely yes though I haven't tried it personally. If it had been wrong someone would have already reported about that on 4pda.ru
teddy0209 said:
Is this rom for Acro S?
I downloaded it from 4pda but i was confused by the file name so haven't tried to install it yet...
Click to expand...
Click to collapse
Yes this ROM was adapted for Acro S all works fine you can easily flash it wia cwm on your AS device )
Has anyone tried the EXR.Fx5280 for Acro S? I've seen it on a chinese site but unable to try it.
radiocity966 said:
Yes this ROM was adapted for Acro S all works fine you can easily flash it wia cwm on your AS device )
Click to expand...
Click to collapse
Is the HDMI working on this rom?
m0nm0npalam0n said:
Is the HDMI working on this rom?
Click to expand...
Click to collapse
I don't use HDMI, but I presume it would work 'cause this is stock based.
@radiocity966 & @dkd On this other forum they have much more Stuff than XDA(sometimes)... you can localize the roms and kernels and talk with dev's to post here too or if you can repost here with they credits... because on this forum i found lot more tutorials than here to dev. but all stay in Chinese =X and i don't know if the china gov. allow the chineses have acess to xda forum...
on Russia/Ukraine/Turkish/Polish forums have a lot more info too...a while ago i dev scripts to Sony Ericsson C905 and others SE phones (maybe i have a user on 4pda.ru but i don't remenber) and I'm a Brazilian and almost i know i learn on russia forums(translating to english)..
these Chineses/Russians Rom's/Kernels have a lot more Custom Drivers Working on kernel... and it's Awesome sometimes
:fingers-crossed:
Guys, Using http://www.freetranslation.com/en/ page per page you can translate the chineses post's ;D
DvDwx. said:
@radiocity966 & @dkd On this other forum they have much more Stuff than XDA(sometimes)... you can localize the roms and kernels and talk with dev's to post here too or if you can repost here with they credits... because on this forum i found lot more tutorials than here to dev. but all stay in Chinese =X and i don't know if the china gov. allow the chineses have acess to xda forum...
on Russia/Ukraine/Turkish/Polish forums have a lot more info too...a while ago i dev scripts to Sony Ericsson C905 and others SE phones (maybe i have a user on 4pda.ru but i don't remenber) and I'm a Brazilian and almost i know i learn on russia forums(translating to english)..
these Chineses/Russians Rom's/Kernels have a lot more Custom Drivers Working on kernel... and it's Awesome sometimes
Click to expand...
Click to collapse
Agreed, they're more active in developing for Sony Legacy devices, i browse there sometimes, though it's a little bit hard 'cause translations are not perfect... And I couldn't ask a question or even join their forum since I can't write using their native language... It would e good to have them here... =)
Have long since emerged android 4.4.2 and no release for the Galaxy staff there Fame .. Help please! Some light on how to install an kitkat in Mobile?
Enviado de meu GT-S6810B usando Tapatalk
Laelson said:
Have long since emerged android 4.4.2 and no release for the Galaxy staff there Fame .. Help please! Some light on how to install an kitkat in Mobile?
Enviado de meu GT-S6810B usando Tapatalk
Click to expand...
Click to collapse
all of patch is going to samsung,another way is make a custom rom like @wulsic doing
about news Kitkat for another Samsung device is stuck on S3 (i think),cause the lastest news i read is ,new touchwhiz launcher cannot run correctly on S3 with 1 gb of ram,and we should patient cause when S3 is not have Kitkat ,and we too not have way ,cause we have 512 mb of ram
Note:
you can check the lastest firmware for fame on www.sammobile.com,and go to tab firmware
When kitkat was released there were leaks that showed that Fame might get the update because it was supposed to support mid/low -end devices, but as we can see there are no updates.. i'll never get another samsung phone again, it's just my second and it's the last.
davexd97 said:
When kitkat was released there were leaks that showed that Fame might get the update because it was supposed to support mid/low -end devices, but as we can see there are no updates.. i'll never get another samsung phone again, it's just my second and it's the last.
Click to expand...
Click to collapse
A guy there in forum CyanogenMod is working on CM10 and 11 "I am waiting for results. Believe we will soon have android 4.4.2 for kitkat Fame patience .. boy![emoji6]
Laelson said:
A guy there in forum CyanogenMod is working on CM10 and 11 "I am waiting for results. Believe we will soon have android 4.4.2 for kitkat Fame patience .. boy![emoji6]
Click to expand...
Click to collapse
Well that guy is me lol but uhh Laelson we have some progress. The Recovery is now 6.0.4.9 and it now has support to flash kitkat based roms.
https://drive.google.com/file/d/0B1u3mnq0nstfZnVSTDZpR0JKV2M/edit?usp=sharing
It still doesnt boot but its a kernel problem i believe that we need to fix it will take some time but yh so is life:angel:
wulsic said:
Well that guy is me lol but uhh Laelson we have some progress. The Recovery is now 6.0.4.9 and it now has support to flash kitkat based roms.
https://drive.google.com/file/d/0B1u3mnq0nstfZnVSTDZpR0JKV2M/edit?usp=sharing
It still doesnt boot but its a kernel problem i believe that we need to fix it will take some time but yh so is life:angel:
Click to expand...
Click to collapse
I will apply the new recovery, and as the kernel? can not use another model? or must be the fame, only modified?
Laelson said:
I will apply the new recovery, and as the kernel? can not use another model? or must be the fame, only modified?
Click to expand...
Click to collapse
Well i still need to make a good working kernel for the kitkat cm11 rom just be patient :angel: i also contacted somebody else who is working on almost the same thing as me but he is further so i asked for advice with the kernel since the source is also 4.1.2 or he also knows a bit wether which patches need to be applied cause it will be faster then that i need to find everything myself since i am not a real kernel dev xd.
But yeah you can try to flash it but yeah... Rom doesnt boot yet but i think before the summervacation it might boot, or yeah my summer vacation is started next week i thought or the week after idk
Here...
Laelson said:
Have long since emerged android 4.4.2 and no release for the Galaxy staff there Fame .. Help please! Some light on how to install an kitkat in Mobile?
Enviado de meu GT-S6810B usando Tapatalk
Click to expand...
Click to collapse
Use this url, is in Spanish but, easy to understand (video inside). Any trouble, i'll glad to help. Hope this helps.
galaxyfame.jimdo.com/rom-kitkat-pro-by-c-s/
Regards.
Farashto said:
Use this url, is in Spanish but, easy to understand (video inside). Any trouble, i'll glad to help. Hope this helps.
galaxyfame.jimdo.com/rom-kitkat-pro-by-c-s/
Regards.
Click to expand...
Click to collapse
that's a custom rom from stock ?????
Dunno
faizauthar12 said:
that's a custom rom from stock ?????
Click to expand...
Click to collapse
Really, i don't know. I'm new in all this and learning every day.
Farashto said:
Really, i don't know. I'm new in all this and learning every day.
Click to expand...
Click to collapse
Im not sure but i thought the guy in the video with that rom was using cwm 6.0.4.6 so... i thought that that version wasnt able to flash kitkat roms so yh.... I want to be 100% sure so im downloading itnow since guys with bad internet connection need to download hours to get the rom and i only around 3 minutes.
EDIT: Like i thought just 4.1.2 stock rom with kitkat theme a bit and edited settings to have more features and android version was 4.4.2 it said but in the fingerprint(Also for playstore neccesary) was 4.1.2)
The guy who made the rom has based it on the Latin stock rom 4.1.2(http://terafile.co/3395503ca6cc)
Farashto said:
Use this url, is in Spanish but, easy to understand (video inside). Any trouble, i'll glad to help. Hope this helps.
galaxyfame.jimdo.com/rom-kitkat-pro-by-c-s/
Regards.
Click to expand...
Click to collapse
I had installed the Deluxe C & S.. had a few mistakes but with GAPPS, could not be updated because they were modified .. then several applications not working (google+, hangouts, among others.) that these problems still there?
Kernel for cm11 ??
andris 934 said:
Kernel for cm11 ??
Click to expand...
Click to collapse
Im still busy with the kernel to make it good working to boot to cm11
And Kitkat is supposed to support low/mid - end devices? Probably Touchwiz but that explains how Google is able to release new versions of android and make them available as updates almost immediately on nexus devices. Im making a google kitkat experience rom but since no kitkat available for our device I have to use jelly bean as base. (Techno rom) Too complete it all I need is to change status bar and boot animation. And UI if possible because I'm new to making roms and this is my first. Any help is appreciated. :laugh:
please help me...
faizauthar12 said:
that's a custom rom from stock ?????
Click to expand...
Click to collapse
can i use s6810 rom in s6812 if not how can i use s6810 rom in s6812....
ayushchauhan said:
can i use s6810 rom in s6812 if not how can i use s6810 rom in s6812....
Click to expand...
Click to collapse
i think ,in this forum,you can find custom rom for S6812
/// WHAT IS RASTAPOP
the way @rascarlo want Android
/// WHAT IS VANILLA
pure aosp built from source
RASTAPOP System Details:
Android 5.1.0_r1 LMY47D
build with kevin's kernel.
bugs:
keyboard light not working;
when open flashlight in notification bar SystemUI crashed.
Find one? Let me know.
rom:
google drive
Root:
Supersu
Google Apps:
PA
MOD:
turn on the keyboard light:
Capacitive Buttons
Sources:
rom:https://github.com/rascarlo?tab=repositories
device:device_lge_geehrc
kernel:kernel_msm
Credits:
google for the sources
kevin for new device tree
rascarlo for the great rom
welcome back bro ....
thx for rom ....
how is batery life in rom ?
Anyone want to test a pure aosp 5.1.0 ROM ?
lollipop (15-03-15):
add rastapop 5.1 build.
add vanilla 5.1.0 build.
Any changelog, any bugs? I believe if you update the OP accordingly, more people will install the ROMs.
How difficult would porting this to the e970 be?
Would I be able to use it by just flashing a geeb kernel?
First if you want something you should ask nicely or do it yourself.
This is international thread.
And for your second question I believe so because the only things you guys stay without are camera and SD card an that is kernel related.
Just do a backup first and then try it out with a geeb kernel.
And is because of that kind of people I stopped posting my projects in the community.
crime_of_heart said:
Any changelog, any bugs? I believe if you update the OP accordingly, more people will install the ROMs.
Click to expand...
Click to collapse
guidoido004 said:
And is because of that kind of people I stopped posting my projects in the community.
Click to expand...
Click to collapse
Just share my project with the one like it. That's all I want to do. ☺
guidoido004 said:
And is because of that kind of people I stopped posting my projects in the community.
Click to expand...
Click to collapse
I am developing kernels as well, just check my ops. I always update changelogs etc. It was a friendly suggestion/advice as I wanted to know at least if everything was working or tested. I don"t force anyone...
You should be a bit careful with your words before categorizing people as "this kind of people"
Not nice, especially on XDA.
crime_of_heart said:
I am developing kernels as well, just check my ops. I always update changelogs etc. It was a friendly suggestion/advice as I wanted to know at least if everything was working or tested. I don"t force anyone...
You should be a bit careful with your words before categorizing people as "this kind of people"
Not nice, especially on XDA.
Click to expand...
Click to collapse
XDA isn't what it used to be. There's so much people lazy to test and learn on they own, that I barely answer to anything nowadays.
Tho, if you're developing, and want to know, I bet the dev of this thread has a github, which you can check. As a dev, understand it is a must.
---------- Post added at 03:28 AM ---------- Previous post was at 03:28 AM ----------
JustinXu said:
Just share my project with the one like it. That's all I want to do. ☺
Click to expand...
Click to collapse
Sorry, wasn't to you. Dx
guidoido004 said:
XDA isn't what it used to be. There's so much people lazy to test and learn on they own, that I barely answer to anything nowadays.
Tho, if you're developing, and want to know, I bet the dev of this thread has a github, which you can check. As a dev, understand it is a must.
---------- Post added at 03:28 AM ---------- Previous post was at 03:28 AM ----------
Sorry, wasn't to you. Dx
Click to expand...
Click to collapse
I know, bro. ?
i cant install it it says this is e 975 model abort installation... i cant find latest twrp for my model i have 2.6.3 maybe thats the reason i have Lg G E975 european model 13mp and 32gb unlocked with freegee mako unlock, any solution?
soniccm said:
i cant install it it says this is e 975 model abort installation... i cant find latest twrp for my model i have 2.6.3 maybe thats the reason i have Lg G E975 european model 13mp and 32gb unlocked with freegee mako unlock, any solution?
Click to expand...
Click to collapse
use philz touch recovery or delete first line in updater-script in rom .zip
Is the bug still there?
dadi11 said:
use philz touch recovery or delete first line in updater-script in rom .zip
Click to expand...
Click to collapse
Either with philz touch recovery same error i dont now how to delete this first lines and i dont now where to find that script...lol
is anybody still developing this project ? has anybody successfully install it? it works ? any bugs?
soniccm said:
is anybody still developing this project ? has anybody successfully install it? it works ? any bugs?
Click to expand...
Click to collapse
Yeah, i think its dead. The last update was 9 days ago LOL.
Except for Bluetooth bug (which plagues all roms that use kevs sources) it will run close to perfect.
As with all roms you are curious to try, do a nandroid backup, test rom and if you dont like restore backup..... And read atleast the last 5+ pages thread before asking such questions.
thanx the developer about his time and for sharing his project
Huawei has finally uploaded the opens source code for all of our devices (the 3 hardware versions).
I have reuploaded it to Google Drive for easier download.
Grab them here : https://goo.gl/DiAj78
Wooooowwww, if that's the sources all is getting great now. Xelfmade, make or phone great again ?
So anybody have the original download link?
Great news! I Assume custom roms etc will become available now once people have built them?
You can get the original downlaods from here : http://consumer.huawei.com/en/opens...Type=openSourceSoftware&pageSize=10&curPage=1
Just search Nova. The download speed was a tad slow.
Huh, i was asking them several times over the past days about the sources. Pleasent coincidence.
Thanks for posting this. Let the fun part begin
Grarak said:
Thanks for posting this. Let the fun part begin
Click to expand...
Click to collapse
Can you PM me? I would like to work with you..
I would like to help, too!
Someone already working on changing of original rom? I'm thinking about trying to modify it for myself.
merlin21 said:
Someone already working on changing of original rom? I'm thinking about trying to modify it for myself.
Click to expand...
Click to collapse
Look this by @Grarak
https://twitter.com/Grarak/status/828231440441700354
pasmadferit said:
Look this by @Grarak
https://twitter.com/Grarak/status/828231440441700354
Click to expand...
Click to collapse
Oh wow Nice! My variant is the CAN-L01 one.
Probably it will work for any variant, even chinese ones.
But my problem is not the rom itself, is the kernel. I'm wanting to learn to mod and compile kernel just for this, as Nova kernel is awful to tweak.
Vinnom said:
Probably it will work for any variant, even chinese ones.
But my problem is not the rom itself, is the kernel. I'm wanting to learn to mod and compile kernel just for this, as Nova kernel is awful to tweak.
Click to expand...
Click to collapse
I know that it will probably work for all variants it's just cool to see my one used as a base for a custom rom.
Do you guys have any guides how to apply these stock roms to unrooted phone? i want to get rid of the carrier crap that's why thinking to apply the stock rom. Thanks.