Develop Bugs

G pro F240L stuck in Bootloop

Hi everyone!
I am starting this new thread with the hope that someone here will help me get back my Lg G Pro back. I have a korean variant of LG G Pro (F240L). I rooted it and then unlocked the bootloader with Feegee. After that i installed a couple of ROMs and all were well. then I tried this one ( LG_GPro_FinalZ_Lite_III_Mod_By_RadeonMaya ). When i rebooted after a successful update from sd card my mobile stuck in bootloop with the 4 colour dots logo turning in-out.
I tried to get back in to the recovery via key combo (Vol dwn + Home + Power) but the phone will just restart. also did a hard reset but nothing seems to work. Then i went for a KDZ flash but the problem is the "B2CappSetup.exe" wont download the mobile support tool.
Now I am stuck with a dead phone for the past 3 days. Any help will be highly appreciated.

zetrixNoob said:
Hi everyone!
I am starting this new thread with the hope that someone here will help me get back my Lg G Pro back. I have a korean variant of LG G Pro (F240L). I rooted it and then unlocked the bootloader with Feegee. After that i installed a couple of ROMs and all were well. then I tried this one ( LG_GPro_FinalZ_Lite_III_Mod_By_RadeonMaya ). When i rebooted after a successful update from sd card my mobile stuck in bootloop with the 4 colour dots logo turning in-out.
I tried to get back in to the recovery via key combo (Vol dwn + Home + Power) but the phone will just restart. also did a hard reset but nothing seems to work. Then i went for a KDZ flash but the problem is the "B2CappSetup.exe" wont download the mobile support tool.
Now I am stuck with a dead phone for the past 3 days. Any help will be highly appreciated.
Click to expand...
Click to collapse
Which version of Windows are you using? try using Win8 32bit, and follow the procedure in below link. Freegee cant be trusted, i did a factory reset on stck rom and after reboot i only saw CWM page on F240L, then i followed this link and revive my phone. And currently using LG gpro Final Z rom by Radeonmaya.
http://forum.xda-developers.com/showthread.php?t=2420219

Bangash737 said:
Which version of Windows are you using? try using Win8 32bit, and follow the procedure in below link. Freegee cant be trusted, i did a factory reset on stck rom and after reboot i only saw CWM page on F240L, then i followed this link and revive my phone. And currently using LG gpro Final Z rom by Radeonmaya.
http://forum.xda-developers.com/showthread.php?t=2420219
Click to expand...
Click to collapse
I am using W8 32bit. I followed the same tutorial and installed the Radeonmaya Rom and thats where i bricked my phone. If i could just get the B2Cappsteup working i think i can fix my phone. Anyway thanks for replying dude.

B2Capp will not work on proxies. Try using it on clean network.
Sent from LG G Pro F240L

Bangash737 said:
B2Capp will not work on proxies. Try using it on clean network.
Sent from LG G Pro F240L
Click to expand...
Click to collapse
I think that might be the problem as i am my university network which is proxy based. Will try on a clean network as suggested and post the update tomorrow. Thanks for a clue to work on though

Bricked after FreeGee

I successfully rooted my Rogers e971, and upon doing so installed the FreeGee app. I hit back up EFS then hit CWM and chose Mako root method. I then tried to reboot the phone and even though it makes the LG sound, and the screen comes on, the LG logo does not appear. The phone apears to be bricked at a backlit black screeen. Can anyone please help me? I am also unable to locate my Rogers stock KDZ. Thanks

butthurtlocker said:
I successfully rooted my Rogers e971, and upon doing so installed the FreeGee app. I hit back up EFS then hit CWM and chose Mako root method. I then tried to reboot the phone and even though it makes the LG sound, and the screen comes on, the LG logo does not appear. The phone apears to be bricked at a backlit black screeen. Can anyone please help me? I am also unable to locate my Rogers stock KDZ. Thanks
Click to expand...
Click to collapse
Sorry, don't have an answer to the first part, but for the original KDZ, look HERE - it's listed under "Rogers" (yeah, I know the country is actually called Canada, not Rogers, but hey, at least the file is there... ). Good luck!

[LG Gpad 8.3 v500] bootloop after installed a custom rom

hello,
my lg gpad 8.3 v500 stucked in a bootloop after i tried to install a custom rom.
I can't enter cwm recovery(or idk how), but the normal one with factory reset and download mode.
It only turns off at 0% battery and only then i can connect my chargecable and charge.
Iam sorry for my bad english and hope someone can help me.
Greetings Pyle
EDIT: Fixed it. Used LG Flashtool and flashed the default Firmware in the download mode and it worked for me.

FYI if/when you have a custom recovery installed, you get to it from the stock recovery and choosing "Factory Reset".
Glad you got it fixed.

Oneplus 3T Touch screen not working - please help

Hi, I was fixing my Oneplus 3t because my girlfriend installed an official update that appeared on the phone and once that was done it didnt boot anymore. When I entered Twrp the touchscreen didnt work anymore. I cant get it to work. I tryed the unbrick method. That way I was able to install android again but touch screen still doesn't work. Any idea?

Eternam said:
Hi, I was fixing my Oneplus 3t because my girlfriend installed an official update that appeared on the phone and once that was done it didnt boot anymore. When I entered Twrp the touchscreen didnt work anymore. I cant get it to work. I tryed the unbrick method. That way I was able to install android again but touch screen still doesn't work. Any idea?
Click to expand...
Click to collapse
Did you change the screen or the digitizer in the past? Or drop the phone?

LG G Pad 8.3 Keeps booting into TWRP

Hello everyone,
My brother gave me his soft bricked G Pad 8.3 and so I thought giving it a chance by flashing LineageOS (lineage-14.1-20181111-nightly-v500).
Btw I am super thankful that there are still updates released here, which I absolutely did not expect. So hundred thumb-ups here
So far I tried:
Flashing newest TWRP (3.5), wipe everything (Dalvik, Cache, System, Data), then flashing Lineage. The pad still kept booting into TWRP. As I read that sometimes an "Error 7" occured with some TWRP versions here and here in the forum, I tried with an "older" version of TWRP (3.3.1 currently) altough I didnt get error 7 but just to be sure.
So after flashing TWRP 3.3.1 again wiped everything, copied the ROM-zip to the pad, flashed the LineageOS and rebooted, but still the pad booted into TWRP instead of the OS.
So I guess I somehow have to overwrite the bootloader right? So ok I installed the Kitkat bootloader (from here). Then rebooted again, installed LineageOS again, but still. The pad boots into TWRP. Would be happy for any hints on how to fix this
Ah yeah and I tried this also already, but as the LG software seems outdated and does not support the pad it did not work.
Btw. ADB commands worked, the pad is recognised by a windows computer so that I can copy files to it, and download mode also worked.
Kind regards,
Dom

No hint? Any advice would be appreciated
Dom

Help would still be appreciated

Domi471 said:
Help would still be appreciated
Click to expand...
Click to collapse
Sorry for late reply:
1. Maybe you are trying to flash ARM64 instead of ARM gapps (LG G Pad 8.3 is a 32-bit device)
2. Or you have a G Pad Google Play Edition (code name V510) or Verizon LTE model (VK810), so lineage-14.1-20181111-nightly-v500 won't work because it is for regular model (V500)
3. I'm out of ideas...