Develop Bugs

help¡¡¡¡¡¡ speaker always on in calls

hboot -6.01.1002, recovery : clockworld 5.02
Tengo problemas al instalar cualquier rom con base cyanogen (incluso las estables de ese sitio) se instalan bien (incluso si llamo o me llaman, cuando aun no reinicio todo funciona bien), pero si reinicio o se reinicia el telefono ,cuando llamo o me llaman el altavoz me aparece activo y debo desactivarlo en cada llamada, ya intente reinstalar varias veces haciendo todos los wipes, borre particiones en la sd y la cree nuevamente, intente hacer downgrade del hboot y todo el proceso finaliza correctamente pero no cambia la version del hboot solo borra el recovery y lo volvi a instalar, he quitado bateria con el telefono encendido y vuelto a colocar y nada. repito solo sucede con las cyanogen, si instalo la rom de fabrica o otra con sense todo funciona correctamente.
translate: by google:
hboot -6.01.1002, recovery: 5.2 clockworld
I have problems installing any rom based Cyanogen (including stable on that site) are installed well (even if I call or call me, when not even restart, everything works fine), but if I restart or reboot the phone itself, when I call or I called the speaker is active and i hace disable it on each call, and try reinstalling several times to make every wipe, delete partitions on the sD and create again, try to downgrade hboot and the whole process is completed but does not change the version hboot the only erases the recovery and I returned to install, I removed the phone battery and put back on and nothing. I repeat only happens with Cyanogen, if I install the factory rom or another sense everything is working .
i need help thanks

[Q] HTC one VX sim not working

I have a HTC ONE VX unlocked factory, I've changed the rom but now does not recognize the sim, sometimes gets the operator and sometimes not, I'm sure it is a software problem because with the previous rom did not pass it, the problem is that I lost the previous rom which was the factory.
Anyone have any idea?
Thank you.
______________________________________________________________________________________________________________________
Tengo un HTC ONE VX desbloqueado de fabrica, le he cambiado la rom pero ahora no reconoce la sim, aveces obtiene el operador y aveces no, estoy seguro es un problema de software ya que con la rom anterior no pasaba eso, el problema es que hé perdido la rom anterior que era la de fabrica.
Alguien tiene alguna idea?
Gracias.

Follow this instruction: Return back to full stock S-ON.
If you are s-on and you haven't changed the CID, lock bootloader with: "fastboot oem lock", and flash RRU.

My Xperia is returned totally crazy, the camera does not work if not plugged in

Good morning people, hope the Esten going better than me, the day before yesterday install could unlock the bootloader and install Pacrom , the day yesterday stay with PureHalo , now seeking applications for camera in google Play, while testing one my phone was shut down abruptly.
When I turn back to (now plugged in ) , I get to try a little more, now it gets all weird .
When I unplug , turn off, WTF. Then I leave it charging for a while and seems to turn on , but when the ends start animcacion off. I connect it to the charger and Buala works , disconnect it , it stops working ( the battery also seems to work, tell me how much power you have , it is downloaded , it is loaded ) .
After trying several times more I realized that every time took less off , so I decided to reinstall Purehalo , I wipe data , cache , dalvik and install exactly the same problem. Flashie the boot again, and still the same problem .
What I noticed is that the problem is with the camera , is something like this:
Camara + plugged : Everything works , but it has to be encrufrado .
If I unplug the camera while this is all going to hell, goes out.
If you try to switch unplugged , sometimes on and sometimes not, but if you turn and entered the chamber , all the crap .
It is a hardware problem ? seems too bizarre to be a hardware problem , there may be some file or software that resists wipe data , wipe cache , wipe dalvik , flash boot and reinstall another room ? and what else you have to put up to get that problem?
I'm really worried right now the phone is very useless, and I do not like to lose my ZL
Bad English, Traductor de google
---------------------------
Spanish copy:
Buenos dias gente, espero que la esten pasando mejor que yo, el dia de antes de ayer instale pude desbloquear el Bootloader e instale Pacrom, el dia de ayer me quede con PureHalo, hoy buscando aplicaciones para camara en google Play, mientras probaba una, mi telefono se apago de golpe.
Cuando lo vuelvo a encender (ahora conectado a la corriente), me pongo a probarlo un poco mas, ahora se pone todo raro.
Cuando lo desconecto, se apaga, WTF. Entonces lo dejo cargando un rato y parece encender, pero cuando termina la animcacion de inicio se apaga. Lo conecto al cargador y buala, funciona, lo desconecto, deja de funcionar (la bateria tambien parece funcionar, me dice cuanta carga tiene, se descarga, se carga).
Despues probando varias veces mas me di cuenta de que cada vez tardaba menos en apagarse, asi que decidi volver a instalar Purehalo, hice wipe data, cache, dalvik e instale, exactamente el mismo problema. Flashie el boot de nuevo, y sigue con el mismo problema.
Lo que note es que el problema esta con la camara, es algo asi:
Camara + enchufado: Funciona todo, pero tiene que estar encrufrado.
Si lo desenchufo mientras esta la camara, se va todo a la mierda, se apaga.
Si lo trato de encender desenchufado, aveces enciende y aveces no, pero si enciende y entro a la camara, todo a la mierda.
Es un problema de Hardware? me parece demasiado bizarro para que sea un problema de hardware, puede existir algun archivo o software que resista wipe data, wipe cache, wipe dalvik, flasheo de boot y reinstalar otra room? y que mas le tengo que poner encima para sacar ese problema?
Estoy realmente preocupado, el telefono ahora mismo es MUY inutil, y no me gustaria perder mi ZL

Best solution for you is to revert to stock firmware
Flash stock ftf by flashtool and reinstall pacrom but dont do your camera thing
Sent from my C6502 using XDA Premium 4 mobile app

alkesh95 said:
Best solution for you is to revert to stock firmware
Flash stock ftf by flashtool and reinstall pacrom but dont do your camera thing
Sent from my C6502 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Sorry, I'm a bit new, try to flash this file Xperia ZL-C6502 India_1270 7911_R2C_10.4.1.B.0.101.ftf, but my kernel is to PacRom, so would not start (was in an infinite loop), so I returned PureHalo to put, you know Kernel (boot.img) you could use to return to stock firmware?
------------
Perdon, soy un poco nuevo, intente flashear este archivo Xperia ZL C6502 India_1270-7911_R2C_10.4.1.B.0.101.ftf, pero mi kernel es el de PacRom, asi que no encendia, (quedaba en un bucle infinito), asi que volvi a poner la PureHalo, sabes que Kernel (boot.img) podria usar para volver al firmware stock?

Agusx1211 said:
Sorry, I'm a bit new, try to flash this file Xperia ZL-C6502 India_1270 7911_R2C_10.4.1.B.0.101.ftf, but my kernel is to PacRom, so would not start (was in an infinite loop), so I returned PureHalo to put, you know Kernel (boot.img) you could use to return to stock firmware?
------------
Perdon, soy un poco nuevo, intente flashear este archivo Xperia ZL C6502 India_1270-7911_R2C_10.4.1.B.0.101.ftf, pero mi kernel es el de PacRom, asi que no encendia, (quedaba en un bucle infinito), asi que volvi a poner la PureHalo, sabes que Kernel (boot.img) podria usar para volver al firmware stock?
Click to expand...
Click to collapse
How are you flashing this file? ---> Xperia ZL C6502 India_1270-7911_R2C_10.4.1.B.0.101.ftf
With flashtool, or through recovery??
When you flash a .ftf through flashtool it replaces your boot.img with the one thats in the . ftf file.

ATRIXXIRTA said:
How are you flashing this file? ---> Xperia ZL C6502 India_1270-7911_R2C_10.4.1.B.0.101.ftf
With flashtool, or through recovery??
When you flash a .ftf through flashtool it replaces your boot.img with the one thats in the . ftf file.
Click to expand...
Click to collapse
Yes, flashing with Flashtool, but the file dont replace the Kernel (the kernel is the file boot.img?), i know that because keeps the "boot image" of PacRom, not Sony logo, when i flash the boot.img of another rom (PureHalo rom), return the sony logo. (but dont open the stock rom).
---------------
Si, flasheo con Flashtool, pero el archivo no remplaza al Kernel (el kernel es el archivo boot.img?), yo se esto porque la imagen que parece al encender el telefono es de "PacRom", no el logo de sony. Pero si cargo manualmente el boot.img de PureHalo, vuelve el logo de sony. (pero no entra a la stock rom).

Download only kernel from one of nuts thread and flash it
Sent from my C6502 using XDA Premium 4 mobile app

When flashing any rom, prove a lot, the phone is in a loop of renicio only starts and runs with PureHalo, or any rom installed from the Recovery.
Cuando flasheo con cualquier rom, prove un monton, el telefono queda en un bucle de renicio, solo enciende y funciona con PureHalo, o cualquier rom instalada desde el Recovery.

Sadly they're all the sympthoms of the battery defect issue;
Let me tell you I've tried everything and soft is not the problem; it'll just frustrate you. You should claim warranty if it's on time or else buy a new battery and change it, here's my thread:
http://forum.xda-developers.com/showthread.php?t=2660706
Still working at it's best :good:
PD: Defect battery is on a broken screen zl, the phone turns off on sony logo unless connected; on stand by, it can turn off randomly; if I push the camera button is a sure thing to happen.

Thank you very much for the help, unfortunately I can never figure out what has happened because my xperia zl was stolen! LOL a stone, stole a shame, thank you very much for the help.
Muchas gracias por la ayuda, lamentablemente nunca voy a poder averiguar que paso porque mi xperia zl fue robado! LOL se robaron una piedra, una lastima, muchas gracias por la ayuda.

The same problem
Agusx1211 said:
Good morning people, hope the Esten going better than me, the day before yesterday install could unlock the bootloader and install Pacrom , the day yesterday stay with PureHalo , now seeking applications for camera in google Play, while testing one my phone was shut down abruptly.
When I turn back to (now plugged in ) , I get to try a little more, now it gets all weird .
When I unplug , turn off, WTF. Then I leave it charging for a while and seems to turn on , but when the ends start animcacion off. I connect it to the charger and Buala works , disconnect it , it stops working ( the battery also seems to work, tell me how much power you have , it is downloaded , it is loaded ) .
After trying several times more I realized that every time took less off , so I decided to reinstall Purehalo , I wipe data , cache , dalvik and install exactly the same problem. Flashie the boot again, and still the same problem .
What I noticed is that the problem is with the camera , is something like this:
Camara + plugged : Everything works , but it has to be encrufrado .
If I unplug the camera while this is all going to hell, goes out.
If you try to switch unplugged , sometimes on and sometimes not, but if you turn and entered the chamber , all the crap .
It is a hardware problem ? seems too bizarre to be a hardware problem , there may be some file or software that resists wipe data , wipe cache , wipe dalvik , flash boot and reinstall another room ? and what else you have to put up to get that problem?
I'm really worried right now the phone is very useless, and I do not like to lose my ZL
Bad English, Traductor de google
---------------------------
Spanish copy:
Buenos dias gente, espero que la esten pasando mejor que yo, el dia de antes de ayer instale pude desbloquear el Bootloader e instale Pacrom, el dia de ayer me quede con PureHalo, hoy buscando aplicaciones para camara en google Play, mientras probaba una, mi telefono se apago de golpe.
Cuando lo vuelvo a encender (ahora conectado a la corriente), me pongo a probarlo un poco mas, ahora se pone todo raro.
Cuando lo desconecto, se apaga, WTF. Entonces lo dejo cargando un rato y parece encender, pero cuando termina la animcacion de inicio se apaga. Lo conecto al cargador y buala, funciona, lo desconecto, deja de funcionar (la bateria tambien parece funcionar, me dice cuanta carga tiene, se descarga, se carga).
Despues probando varias veces mas me di cuenta de que cada vez tardaba menos en apagarse, asi que decidi volver a instalar Purehalo, hice wipe data, cache, dalvik e instale, exactamente el mismo problema. Flashie el boot de nuevo, y sigue con el mismo problema.
Lo que note es que el problema esta con la camara, es algo asi:
Camara + enchufado: Funciona todo, pero tiene que estar encrufrado.
Si lo desenchufo mientras esta la camara, se va todo a la mierda, se apaga.
Si lo trato de encender desenchufado, aveces enciende y aveces no, pero si enciende y entro a la camara, todo a la mierda.
Es un problema de Hardware? me parece demasiado bizarro para que sea un problema de hardware, puede existir algun archivo o software que resista wipe data, wipe cache, wipe dalvik, flasheo de boot y reinstalar otra room? y que mas le tengo que poner encima para sacar ese problema?
Estoy realmente preocupado, el telefono ahora mismo es MUY inutil, y no me gustaria perder mi ZL
Click to expand...
Click to collapse
Hi, I have the same problem, the phone just starts via charger, once charger is unplugged, the phone switches off if an application is running
I have to buy a new battery, surely it take to get to Colombia approximately in 20 days
I will change the battery because I bought my phone (C6506) in Canadá, Look in youtube: Disassembly xperia zl
it's easy

HOX+ Bricked

Hi.
I need help my HOX+ is bricked. It keeps in the bootloader screen is relocked. I can't do anything because if I try to unlock the bootloader or install the stock rom it says that the baterry is low. I don't know why the battery keeps low if I have the usb cable in the phone all the day (I try in the pc and in the AC port) . When the phone is connected it turn off alone. I need help :crying:
Sorry for my bad english.
In spanish:
Hola
Necesito ayuda, mi HOX+ esta brickeado. Se queda en la pantalla del bootloader, esta relocked. No puedo hacer nada, porque si intento desbloquear el bootloader o instalar la stock rom me dices que la batería esta baja. No se porque la batería sigues baja si mantengo el teléfono todo el día conectado al cable usb (Lo pobre en la pc y en el toma corriente). Cuando el teléfono esta conectado se apaga solo. Necesito ayuda :crying:

Check this thread: http://forum.xda-developers.com/showthread.php?t=1658084
You will find a script to charge your phone from fastboot.

Thanks. I will try it.

Help I can not install roms or re-stock in my htc

recien compre un htc m9 y desboque bootloader y lo hice root, instale TWRP recovery y instale lineage 15 para probar
despues trate de instalar lineagen 14 y nada y probe con otras y todas me da error 7, ya probe TWRP diferentes verciones y nada
incluso he tratado de instalar la stock y no me deja hacer nada la RUU no inicia bien en windows(tengo windows 10) solo carga y llega a la parte de las politicas y ya
la unica que me funciono fue la lineagen 15 pero no sirve ni el audio ni la camara (asi lo tengo funcionando por ahora) tengo bootloader desbloqueado, TWRP 3.0.0.0, S-ON y algo raro en modo dawnload sale como esa vercion himaulatt
ya no se que hacer, solo quiero una rom que funcione estable o regresar a stock, ayuda por favor
English translation:
just bought an m9 htc and bootloader and I did it root, install TWRP recovery and install lineage 15 to test
then try to install lineagen 14 and nothing and try with others and all I get error 7, and probe TWRP different views and nothing
I have even tried to install the stock and it does not let me do anything the UUU does not start well in windows (I have windows 10) only loads and arrives at the part of the policies and already
the only one that worked was the line 15 but it does not work either the audio or the camera (so I have it running for now) I have bootloader unlocked, TWRP 3.0.0.0, S-ON and something weird in dawnload mode comes out as that himaulatt
I do not know what to do, I just want a rom that works stable or return to stock, help please

sethyael said:
just bought an m9 htc and bootloader and I did it root, install TWRP recovery and install lineage 15 to test
then try to install lineagen 14 and nothing and try with others and all I get error 7, and probe TWRP different views and nothing
I have even tried to install the stock and it does not let me do anything the UUU does not start well in windows (I have windows 10) only loads and arrives at the part of the policies and already
the only one that worked was the line 15 but it does not work either the audio or the camera (so I have it running for now) I have bootloader unlocked, TWRP 3.0.0.0, S-ON and something weird in dawnload mode comes out as that himaulatt
I do not know what to do, I just want a rom that works stable or return to stock, help please
Click to expand...
Click to collapse
In download mode find the main os version and take note of the file name it is asking for at the bottom of the screen. Make a note for later.
Google for and download the corresponding firmware ruu in zip format and DOUBLE CHECK THE MD5 MATCHES THE ORIGINAL WHERE YOU GOT IT FROM!!.
Rename the zip to what it was asking for at the bottom of the screen in download mode and copy it to a micro sd card. MAKE SURE YOY DOUBLE CHECK THE MD5 ON THE SD CARD TOO.
Put the micro sd card in the phone, connect a working charger and boot to download mode, it should prompt you to press vol+ to flash the stock firmware.
Wait a short while until the phone reboots completely.
If you have any errors and you're absolutely sure you have the correct ruu then your phone may have a fault.
Translated by Google
En el modo de descarga, encuentre la versión del sistema operativo principal y tome nota del nombre de archivo que está solicitando en la parte inferior de la pantalla. Haga una nota para más tarde.
Busque y descargue la ruu de firmware correspondiente en formato zip y DOBLE CHEQUEE EL MD5 COINCIDE CON EL ORIGINAL DE DONDE LO OBTENIÓ !!.
Cambie el nombre del archivo zip a lo que estaba pidiendo en la parte inferior de la pantalla en modo de descarga y cópielo en una tarjeta micro sd. ASEGÚRESE DE QUE DOBLE REVISE EL MD5 EN LA TARJETA SD TAMBIÉN.
Coloque la tarjeta micro sd en el teléfono, conecte un cargador que funcione e inicie para descargar, le pedirá que presione vol + para actualizar el firmware.
Espere un momento hasta que el teléfono se reinicie por completo.
Si tiene algún error y está absolutamente seguro de que tiene la ruu correcta, entonces su teléfono puede tener un error.
Traducido por Google

gracias me funciono prefecto, enserio salvaste mi htc :good: you are the best

sethyael said:
recien compre un htc m9 y desboque bootloader y lo hice root, instale TWRP recovery y instale lineage 15 para probar
despues trate de instalar lineagen 14 y nada y probe con otras y todas me da error 7, ya probe TWRP diferentes verciones y nada
incluso he tratado de instalar la stock y no me deja hacer nada la RUU no inicia bien en windows(tengo windows 10) solo carga y llega a la parte de las politicas y ya
la unica que me funciono fue la lineagen 15 pero no sirve ni el audio ni la camara (asi lo tengo funcionando por ahora) tengo bootloader desbloqueado, TWRP 3.0.0.0, S-ON y algo raro en modo dawnload sale como esa vercion himaulatt
ya no se que hacer, solo quiero una rom que funcione estable o regresar a stock, ayuda por favor
English translation:
just bought an m9 htc and bootloader and I did it root, install TWRP recovery and install lineage 15 to test
then try to install lineagen 14 and nothing and try with others and all I get error 7, and probe TWRP different views and nothing
I have even tried to install the stock and it does not let me do anything the UUU does not start well in windows (I have windows 10) only loads and arrives at the part of the policies and already
the only one that worked was the line 15 but it does not work either the audio or the camera (so I have it running for now) I have bootloader unlocked, TWRP 3.0.0.0, S-ON and something weird in dawnload mode comes out as that himaulatt
I do not know what to do, I just want a rom that works stable or return to stock, help please
Click to expand...
Click to collapse
Per the forum rules:
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature).
Por las reglas del foro:
4. Usa el idioma inglés.
Entendemos que con todas las diferentes nacionalidades, no todos hablan inglés bien, pero intenten. Si realmente no puede publicar en inglés, use un traductor en línea. Puede incluir su mensaje original en su propio idioma, debajo de la traducción al inglés. (Esta regla cubre sus publicaciones, entradas de perfil y firma).
Cheers,
Magnum_Enforcer
FSM