DO NOT BOTHER FLASHING. THERE WAS SOME CROSS CONTAMINATION WITH THIS BUILD AND CM FOR THE NOTE 10.1. PLEASE WAIT UNTIL V2 OF THIS ROM IS UPLOADED TO FLASH. MORE DETAILS TO COME.
THIS IS UNDER HEAVY DEVELOPMENT. DON'T THINK THIS IS EVEN CLOSE TO DAILY DRIVER. THIS ROM WILL EAT YOUR KITTEN AND SET YOUR HOUSE ON FIRE. BE WARNED. YOU SHOULD REALLY ONLY FLASH THIS IF YOU UNDERSTAND THE RISKS AND KNOW WHAT YOUR DOING. I LITERALLY CANNOT STRESS THAT ENOUGH.
HLTETMO Device Tree Now Available HERE.
UNOFFICIAL CM 10.2 FOR THE T-MOBILE GALAXY NOTE 3 (HLTETMO)
INSTRUCTIONS FOR .ZIP FLASH!
ALWAYS FULL WIPE!
1. Download ROM From Google Drive.
2. Backup your apps with preferred method (have not succesfully restored any app backups.)
3. Reboot Into Recovery. Factory Reset, Clear Data, Cache, System, Everything!
4. Flash ROM
5. Flash CM 10.2 GAPPS
6. Reboot and let phone sit for a few minutes before going through the initial setup.
DOWNLOAD V2 SOON
DOWNLOAD CM GAPPS HERE
I CAN NOT GUARANTEE THAT ANYTHING AT ALL WORKS. I CANT EVEN GUARANTEE THAT IT WILL FLASH CORRECTLY. THIS IS ALL DONE AT YOUR OWN RISK! I BUILT IT BUT HAVEN'T HAD TIME TO FLASH IT OR TEST IT. FLASH AT YOUR OWN RISK. YOUR PHONE COULD TURN INTO AN iPHONE AFTER FLASHING SO FLASH AT OWN RISK!!!!!!!!
WILL UPDATE WITH CHANGE LOG INFORMATION, SCREENSHOTS, AND OTHER ASSORTED "EXPECTED" THINGS.
Reserved #1
Reserved #2
YES Thanks, something is something :laugh::laugh::good:
AOSP is everything, im so sick of TW already!
Cool can you do 4.4 KitKat?
Sent from my SM-N900T using XDA Premium 4 mobile app
Best of luck on this project! If you can get it to the point to being a daily driver I will take the step to void my warranty and sadly turning my knox to 0x1 =(
tsunami2312 said:
YES Thanks, something is something :laugh::laugh::good:
AOSP is everything, im so sick of TW already!
Click to expand...
Click to collapse
jpeps said:
Cool can you do 4.4 KitKat?
Sent from my SM-N900T using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Something is better than nothing. As for 4.4 KitKat, I cant even think about that until this is a little more polished.
If you do flash this please give me as much feedback as possible.
Remember you flash at your own risk!
Amazing. Will try soon eneough
Sent from my SM-N900T
Will this work with the international sm-9005 version?
Sent from my SM-N9005 using XDA Premium 4 mobile app
As serious as this is, your warnings are hilarious!!
AWESOME!
Can you provide a basic what works and what doesn't list? I'm up for bugs, but if big things like radio and wifi don't work, Internet doesn't connect, and it can't read your internal sdcard then there's no point in testing it yet. I could live without the camera and bluetooth to test CM (I'd just carry my Note 1 around for those things) but it still should be usable as a phone.
TheGrandFinale2001 said:
As serious as this is, your warnings are hilarious!!
Click to expand...
Click to collapse
The warning are meant to be pretty serious as this is an unstable build of CM for the T-Mobile Note 3, but c'mon, whats work without a little humor and play
CalcProgrammer1 said:
AWESOME!
Can you provide a basic what works and what doesn't list? I'm up for bugs, but if big things like radio and wifi don't work, Internet doesn't connect, and it can't read your internal sdcard then there's no point in testing it yet. I could live without the camera and bluetooth to test CM (I'd just carry my Note 1 around for those things) but it still should be usable as a phone.
Click to expand...
Click to collapse
From OP:
I BUILT IT BUT HAVEN'T HAD TIME TO FLASH IT OR TEST IT.
Any one flash yet??
Sent from my SM-N900T
CalcProgrammer1 said:
AWESOME!
Can you provide a basic what works and what doesn't list? I'm up for bugs, but if big things like radio and wifi don't work, Internet doesn't connect, and it can't read your internal sdcard then there's no point in testing it yet. I could live without the camera and bluetooth to test CM (I'd just carry my Note 1 around for those things) but it still should be usable as a phone.
Click to expand...
Click to collapse
I will be flashing this when I get home (which will be around 11:30pm EST) as I am currently working. I posted the build right before I left for work.
I may be able to sneak a flash in around 8PM EST on my break.
I have a little Meenova Micro SD Card Reader (which utilizes the USB OTG functionality.) that I have the ROM .zip file on.
CrashTestDroid said:
From OP:
I BUILT IT BUT HAVEN'T HAD TIME TO FLASH IT OR TEST IT.
Click to expand...
Click to collapse
I will be providing more information by the end of the night on working and non-working features. I will be flashing this in just a few hours. I mainly put it up in case anyone needs the files for MODS or anything else at the current point. NOT A DAILY DRIVER. More of a WIP!
Sounds good, I'm backing up my TW ROM now, think I'll take the guinea pig plunge if all looks good. I have my Note 1 in working order if need be. I'm a bit concerned why it's 2.3GB though, most CM ROMs I've used on my Note 1 are around 200MB.
transferring to my phone and flashing now. once i get it booted, i'll post!!!
Fails to flash right away, using TWRP 2.6.3.8. I'll try again with v2 when you get it uploaded.
Hi,
This rom is compatible SM-N9005 ?
Thanks
Related
Please give thanks to madmack!!
I did nothing to help with this, just bringing it to the people of this forums that want it.
It has working A2DP by pulling some stuff from the 12-26-12 build and implementing them into 1-15-13 and might have some broken features. If anyone finds any broken features then let me know and I'll ad them to this post.
VoIP calling is borked (video chats)
Call Echo is possible to return
His post with the download link, give him a thanks
http://forum.xda-developers.com/showpost.php?p=36804356&postcount=10721
Here are some posts confirming
http://forum.xda-developers.com/showpost.php?p=36842057&postcount=10754
http://forum.xda-developers.com/showpost.php?p=36831201&postcount=10740
(Joe Dirt Voice) DAAANNGG I thought you people would love this haha. Oh well.
mt3g said:
(Joe Dirt Voice) DAAANNGG I thought you people would love this haha. Oh well.
Click to expand...
Click to collapse
Holy crap this is heroic. I'll bet people haven't really noticed... I know I don't look at the general section terribly often but glad I did today. Downloading now. A thousand thanks to you.
No worries. I know people want it cause I posted that I had the old build of 10.1 with working BT and my PM box got flooded with hits.
Report back for folks.
Sent from my SGH-T999 using xda premium
Hey thanks I was wondering when this would show up thanks downloading now
bad ass Baked sg3
mt3g said:
No worries. I know people want it cause I posted that I had the old build of 10.1 with working BT and my PM box got flooded with hits.
Report back for folks.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
A2DP definitely works as expected. Audio is busted in g+ hangouts (think this got fixed in the caf audio stuff that happened in later nightlies). But that's a decent tradeoff. Haven't seen any other issues other than the ones everyone knows about from the regular nightlies- occasional flicker, lag after some games, etc.
How do you install this? Since its ATT, I get an error with CWM6 on my TMO S3.
Is there a version out there for the SGH-T999 (d2tmo)? I'm guessing since this is the d2att version it won't work on the SGH-T999, right? Thanks for fixing this issue.
I've flashed about 7 different att ROMs on my phone without editing anything before flashing. They work fine after unless trying to use something T-Mobile specific, like T-Mobile voicemail. I didn't fix it just brought to t999s attention.
Sent from my SGH-T999 using xda premium
mt3g said:
I've flashed about 7 different att ROMs on my phone without editing anything before flashing. They work fine after unless trying to use something T-Mobile specific, like T-Mobile voicemail. I didn't fix it just brought to t999s attention.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Thank you, this helps. I have the latest experimental build of 10.1, do you know if I will have to wipe my phone or can I just flash it over the existing 10.1 build? Thank you
I would try flashing like this.
Boot into recovery
wipe system
flash A2DP working Cm-10.1 rom
Flash gapps
reboot and test, if it doesn't work then wipe.
mt3g said:
I would try flashing like this.
Boot into recovery
wipe system
flash A2DP working Cm-10.1 rom
Flash gapps
reboot and test, if it doesn't work then wipe.
Click to expand...
Click to collapse
I've installed dozens of roms over the last few years, including some AT&T ones, but this one specifically gives me an error when installing the rom. I always wipe everything when going to a new rom. I even downloaded it a 2nd time incase the first one was corrupted or something.
This isn't too important to me anymore, cause I found a 4.1.2 rom I like, that has BT and Hotspot with encryption working, which neither seem to work with any 4.2 roms. But I am curious why it wasn't working.
so madmack's patch has made it into the latest nightly correct? no need for the rom he posted, just use the latest cm10.1 nightly?
dodgefan67 said:
so madmack's patch has made it into the latest nightly correct? no need for the rom he posted, just use the latest cm10.1 nightly?
Click to expand...
Click to collapse
I looked at things merged and an a2dp commit was but seen that more then a few times added with nothing changed so I'm going with a no on that one dude.
T-Mobile SGS III
which GAPPs to use with this 10.1 fix
thanks for the link to a bluetooth solution. Which GAPPs do I use for this ROM? I am new to rooting.
I loaded a later version dated april 11 - 2013 but bluetooth and voice search is not working. Any pointers would be appreciated.
Running on Skyrocket.
very much appreciated
--------------
mt3g said:
Please give thanks to madmack!!
I did nothing to help with this, just bringing it to the people of this forums that want it.
It has working A2DP by pulling some stuff from the 12-26-12 build and implementing them into 1-15-13 and might have some broken features. If anyone finds any broken features then let me know and I'll ad them to this post.
VoIP calling is borked (video chats)
Call Echo is possible to return
His post with the download link, give him a thanks
http://forum.xda-developers.com/showpost.php?p=36804356&postcount=10721
Here are some posts confirming
http://forum.xda-developers.com/showpost.php?p=36842057&postcount=10754
http://forum.xda-developers.com/showpost.php?p=36831201&postcount=10740
Click to expand...
Click to collapse
1dufflebag said:
thanks for the link to a bluetooth solution. Which GAPPs do I use for this ROM? I am new to rooting.
I loaded a later version dated april 11 - 2013 but bluetooth and voice search is not working. Any pointers would be appreciated.
Running on Skyrocket.
very much appreciated
--------------
Click to expand...
Click to collapse
ahhh nothing says XDA like a thread being raised from the dead
ok, first off, this is for the S3, not the S2 Skyrocket as your sig says you are using
second, go to the CM download page for your device (http://get.cm/?device=skyrocket) and grab the most recent nightly or get the stable version of 10.1 for it here (http://get.cm/?device=skyrocket&type=stable) dated June 24th. those should work fine
third, go to http://goo.im/gapps and grab the first file there, dated 20130301 for 4.2.2
make sure your recovery is updated (CWM or TWRP) then flash CM first, then gapps
then go here (http://forum.xda-developers.com/forumdisplay.php?f=1399) for the AT&T Skyrocket forums
good luck!
Midnight_Rider said:
ahhh nothing says XDA like a thread being raised from the dead
ok, first off, this is for the S3, not the S2 Skyrocket as your sig says you are using
second, go to the CM download page for your device (http://get.cm/?device=skyrocket) and grab the most recent nightly or get the stable version of 10.1 for it here (http://get.cm/?device=skyrocket&type=stable) dated June 24th. those should work fine
third, go to http://goo.im/gapps and grab the first file there, dated 20130301 for 4.2.2
make sure your recovery is updated (CWM or TWRP) then flash CM first, then gapps
then go here (http://forum.xda-developers.com/forumdisplay.php?f=1399) for the AT&T Skyrocket forums
good luck!
Click to expand...
Click to collapse
---------
Thanks for the information and redirection
@Chromium I flashed the release 5. And i made how you say:
-flash the room
-boot
-flash gapp
-boot
After that Sistem wizard is stop working. What can i do please help @Chromium
Are you sure? I tested a few times and it worked fine. If you do a full wipe, flash the rom and boot it up is everything ok? (no gapps yet)
Chromium said:
Are you sure? I tested a few times and it worked fine. If you do a full wipe, flash the rom and boot it up is everything ok? (no gapps yet)
Click to expand...
Click to collapse
I tried again, same thing.
First 2 times i was flashing the rom without, boot and aftre that to flash the gapp.
After that i saw that you sad to flash,boot,flash gapp, boot. Same result.
Anyone have the same problem?
TheValnar said:
I tried again, same thing.
First 2 times i was flashing the rom without, boot and aftre that to flash the gapp.
After that i saw that you sad to flash,boot,flash gapp, boot. Same result.
Anyone have the same problem?
Click to expand...
Click to collapse
Try again:
- Full wipe
- Flash rom
- Reboot <-- Let it settle down a bit
- Go back into recovery and flash gapps
- Reboot
If its still not working, get me a logcat
Chromium said:
Try again:
- Full wipe
- Flash rom
- Reboot <-- Let it settle down a bit
- Go back into recovery and flash
- Reboot
If its still not working, get me a logcat
Click to expand...
Click to collapse
I'll try again. Sorry to bother you, but i need to see this realese improvements. VPN fix:silly:
This time i'll let it settle dow a little about 30-60 seconds.
And i'll give you the answer
No luck :|
I'd give you the logcat, but i don't know how
And this is how i won't see the new realese
TheValnar said:
No luck :|
I'd give you the logcat, but i don't know how
And this is how i won't see the new realese
Click to expand...
Click to collapse
Ok, i was just talking to someone that was having the exact same problem as you and it turned out that he wasnt properly doing a full wipe.
You need to format everything other than the sd. In 4ext the option for this is in wipe > format all partitions (except sdcard)
Make sure you do this.
Chromium said:
Ok, i was just talking to someone that was having the exact same problem as you and it turned out that he wasnt properly doing a full wipe.
You need to format everything other than the sd. In 4ext the option for this is in wipe > format all partitions (except sdcard)
Make sure you do this.
Click to expand...
Click to collapse
OK. I'll try this method too
And why don't you fix this, for the users to not go trough so much trouble ?
TheValnar said:
And why don't you fix this, for the users to not go trough so much trouble ?
Click to expand...
Click to collapse
1. Users arent really having to go through much trouble. The only difference now is that you need to reboot in between flashing the rom and gapps.
2. By slightly breaking the setup wizard, I seem to have been able to fix the WiFi bug where it would get stuck turning on. I would rather have better working WiFi that I constantly use, than a perfectly working setup wizard which I only use once. Im sure the majority of other users feel the same.
you're right. I just said. Don't be mad on me :|
And finally it started . Hell yeah :highfive:
Thx for the somthest,fastest,stable 4.4 rom :>
hell yeah.
TheValnar said:
you're right. I just said. Don't be mad on me :|
And finally it started . Hell yeah :highfive:
Thx for the somthest,fastest,stable 4.4 rom :>
hell yeah.
Click to expand...
Click to collapse
Haha, not mad, just explaining. Have fun
VPN Issues
Greetings, I have installed Beanstalk 4.4.2 on my 4 years old Desire just few days ago. So far so good, it is great, fast, it really revived my smartphone. But ...
What is the reason no form of VPN works on it? I have some prepaid solution and its app doesn't work. OpenVPN doesn't. PP2P/L2TP solutions don't work. Is it system bug which needs fix or am I doing anything wrong?
Thanks for answer.
Skottz said:
Greetings, I have installed Beanstalk 4.4.2 on my 4 years old Desire just few days ago. So far so good, it is great, fast, it really revived my smartphone. But ...
What is the reason no form of VPN works on it? I have some prepaid solution and its app doesn't work. OpenVPN doesn't. PP2P/L2TP solutions don't work. Is it system bug which needs fix or am I doing anything wrong?
Thanks for answer.
Click to expand...
Click to collapse
It needs kernel 3 which fixes that and camera and otherstuff but that's still in development.
Sent from my HTC Desire HD A9191 using XDA Free mobile app
lilsafbig said:
It needs kernel 3 which fixes that and camera and otherstuff but that's still in development.
Sent from my HTC Desire HD A9191 using XDA Free mobile app
Click to expand...
Click to collapse
Sorry to ruin it for you but camera will not be fixed with K3 release, if it will be released anytime which I highly doubt anymore. It is a matter of unreleased sources and libs by HTC, so the best we will get is what we already have, camera-wise. So long story short, if you want fully functional camera and video recording, GB is the only way or that chinese ICS released sometime ago.
Tapatalked
So if I want fully functional and fast HTC Desire I should go for Mild Wild or pure CM? What is the difference between cm based and redux based MW? Thanks.
Odoslané z TF300T pomocou Tapatalku
I would recommend Mildwild MW rom based on redux2.
Skottz said:
What is the difference between cm based and redux based MW?
Click to expand...
Click to collapse
They're just slightly different ROM bases. Install both, see which one you prefer
It's the best way to find out, unlike recommendations without justifications as above..
Remember you can maximise space much better with either of those ROMs as they into smaller hboots
CM version will fit into cm7r2, redux should fit into oxygenR2, check the threads.
kostelo said:
Sorry to ruin it for you but camera will not be fixed with K3 release, if it will be released anytime which I highly doubt anymore. It is a matter of unreleased sources and libs by HTC, so the best we will get is what we already have, camera-wise. So long story short, if you want fully functional camera and video recording, GB is the only way or that chinese ICS released sometime ago.
Tapatalked
Click to expand...
Click to collapse
Yh but didn't Qualcomm release adreno 200 drivers? I'm sure they did.
Sent from my HTC Desire HD A9191 using XDA Free mobile app
Qualcomm has nothing to do with camera, unfortunately.
Hey People,
Looking for advise on a Rom for the Note II - I am a new Note II owner,
I have SLIMFAST 4.4 v-4 on it now...
I have not looked around enough to know what ROM is the most complete - I want KitKat.. but I want most complete..
I really would like to put one rom on, and not touch for the next long while if possible.
Suggestions? I want USABLE 1st .. not cutting edge.
James
Biker1bob said:
Hey People,
Looking for advise on a Rom for the Note II - I am a new Note II owner,
I have SLIMFAST 4.4 v-4 on it now...
I have not looked around enough to know what ROM is the most complete - I want KitKat.. but I want most complete..
I really would like to put one rom on, and not touch for the next long while if possible.
Suggestions? I want USABLE 1st .. not cutting edge.
James
Click to expand...
Click to collapse
Try this one out Ive been running this ever since it came out im on the buttnaked version and its almost like being on cm with how fast it is
http://forum.xda-developers.com/showthread.php?t=2803363
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
OK, couple of things
1. I see so much talk about the bootloader for this phone.. is there an FAQ or can someone help me know what bootloader I have? what I want? and what my dangers are??
2. I need a phone I can listen to text msgs from people through bluetooth and then send a text using bluetooth voice .. So I need a rom and I think s-talk? to do this??
3. Is there an IRC channel for XDA? or somewhere I can chat with people about this realtime??
Thanks
James
Biker1bob said:
Hey People,
Looking for advise on a Rom for the Note II - I am a new Note II owner,
I have SLIMFAST 4.4 v-4 on it now...
I have not looked around enough to know what ROM is the most complete - I want KitKat.. but I want most complete..
I really would like to put one rom on, and not touch for the next long while if possible.
Suggestions? I want USABLE 1st .. not cutting edge.
James
Click to expand...
Click to collapse
Keep what u have.
Sent from my SGH-I317 using XDA Free mobile app
Slimfast seems ok, development seems to have stopped.
what about the rom based on the N7100 official?
James
Biker1bob said:
OK, couple of things
1. I see so much talk about the bootloader for this phone.. is there an FAQ or can someone help me know what bootloader I have? what I want? and what my dangers are??
2. I need a phone I can listen to text msgs from people through bluetooth and then send a text using bluetooth voice .. So I need a rom and I think s-talk? to do this??
3. Is there an IRC channel for XDA? or somewhere I can chat with people about this realtime??
Thanks
James
Click to expand...
Click to collapse
Well if you looking for something with svoice you would wanna do a touchwiz rom
OK, I am looking at a few different roms.
I see there was an offical a few weeks ago and that they one has been ported to the i317m - which one is that?
I also see lots of talk about bootloaders.. I see 4.2 4.3 etc.. my bootloader is i317mvlucmk5... I see nothing about 4.2 or 4.3?? what do I have??
Thanks
James
terpin32 said:
Well if you looking for something with svoice you would wanna do a touchwiz rom
Click to expand...
Click to collapse
The one I have 4.4 slimfast is a tw rom correct?
I messed it up some.. I think I will reflash.. but there is so much talk about bootloaders and deoxed, etc.etc.. this much more complicated than my old LG and Cyanogen.
James
Biker1bob said:
The one I have 4.4 slimfast is a tw rom correct?
I messed it up some.. I think I will reflash.. but there is so much talk about bootloaders and deoxed, etc.etc.. this much more complicated than my old LG and Cyanogen.
James
Click to expand...
Click to collapse
It's not any more complicated. Don't worry about odex and stuff. Just stay in the development threads here and flash what you like. Not trying to be mean here but these types of threads are not necessary. Just make a nandroid and flash away and see what best fits your needs. Each rom is subject to opinion. I use slimfast and have had no issues with it.
Sent from my SGH-I317 using XDA Free mobile app
Eternalty said:
It's not any more complicated. Don't worry about odex and stuff. Just stay in the development threads here and flash what you like. Not trying to be mean here but these types of threads are not necessary. Just make a nandroid and flash away and see what best fits your needs. Each rom is subject to opinion. I use slimfast and have had no issues with it.
Sent from my SGH-I317 using XDA Free mobile app
Click to expand...
Click to collapse
I keep asking questions, and you give me other replies rather than answers... If might be straightforward and easy for you. and maybe screwing around with a $350 phone is no issue for you.. but me.. not so much.
"In theory you should be fine if you do dirty flash from another 4.3 rom such as DN3 v1.0 or SN10
We recommend TWRP 2.6.3.1 to flash this rom.
You need 4.3 boot loader.
Have both TWRP and latest CWM on your external SD Card along with Ditto Note 3.1.1
Flash TWRP 2.6.3.1, go into Wipe and slide to do the Factory Reset."
This is not straight forward to me.. since I have no idea if I have a 4.3 bootloader - says I HAVE TO HAVE ONE.
TWRP is at 2.7 now .. is there a reason he says to use 2.6.3.1??? on a rom that was updated 3 days ago??
These are the things that bother me.. I am not interested in bricking my phone.
If you dont want to help.. fine, But explanations for the terms used above are not coming up in searches, unless I want to read a ton of threads.. so I thought someone might answer for me.
James
Biker1bob said:
I keep asking questions, and you give me other replies rather than answers... If might be straightforward and easy for you. and maybe screwing around with a $350 phone is no issue for you.. but me.. not so much.
"In theory you should be fine if you do dirty flash from another 4.3 rom such as DN3 v1.0 or SN10
We recommend TWRP 2.6.3.1 to flash this rom.
You need 4.3 boot loader.
Have both TWRP and latest CWM on your external SD Card along with Ditto Note 3.1.1
Flash TWRP 2.6.3.1, go into Wipe and slide to do the Factory Reset."
This is not straight forward to me.. since I have no idea if I have a 4.3 bootloader - says I HAVE TO HAVE ONE.
TWRP is at 2.7 now .. is there a reason he says to use 2.6.3.1??? on a rom that was updated 3 days ago??
These are the things that bother me.. I am not interested in bricking my phone.
If you dont want to help.. fine, But explanations for the terms used above are not coming up in searches, unless I want to read a ton of threads.. so I thought someone might answer for me.
James
Click to expand...
Click to collapse
If that's what the developer says to use then use it. I would say he knows why to use 2.6.3.1 but that's not really important. Samsung phones are very hard to brick if you follow the directions. I'm no expert dude, all I do is follow the directions in the OP. If you do that you will be fine. What were you running prior to slim fast? If you're not sure you have the bootloader you can just flash it again.
Sent from my SGH-I317 using XDA Free mobile app
The best thing to do at XDA is read and learn. Reading the forums is the best way to find what you are seeking. Closed.
Good evening everyone. I recently got this phone from the Black Friday deal at Best Buy for 80$ and rooted and did all of that without much problem. I installed the Wicked ROM without any issues, and tested it out but I prefer AOSP. But when I flash Cyanogen or Bliss, I lose all of the mobile data , the baseband, here I include a screenshot. I have flashed a stock ROM once again, activated it again without any problem, but when I try to flash an AOSP ROM again I lose everything. Is there anything I can do about that? I have searched the forums and Google and found no solutions. Any help would be greatly appreciated.
Did you check to make sure that the md5 matched? Anytime I've had that happen either the md5 didn't match, or I needed to use a different kernel. My Goto kernel for AOSP ROMs has been BMS.
mattzeller said:
Did you check to make sure that the md5 matched? Anytime I've had that happen either the md5 didn't match, or I needed to use a different kernel. My Goto kernel for AOSP ROMs has been BMS.
Click to expand...
Click to collapse
Thanks for the tip, tried flashing Cyanogenmod with that kernel and the same thing happens, I lose all of the settings related to the Baseband, Modem and IMEI. I checked the md5 and it matches completely. I have no idea what is happening. For now I settled into the Conquest Singulalirty ROM which provides an ASJOP look but on offical firmware. But still I would like to know how to solve this problem so if anyone has any tips that would be greatly appreciated.
Is your phone the L710T model by any chance? I had the same problem with every rom I tried EXCEPT for Gummy 3.0. For some reason Gummy 3.0 recognizes my baseband/modem but if I try Gummy 4.0 or any other AOSP rom, no baseband.
Flash universal fix
luisro said:
Good evening everyone. I recently got this phone from the Black Friday deal at Best Buy for 80$ and rooted and did all of that without much problem. I installed the Wicked ROM without any issues, and tested it out but I prefer AOSP. But when I flash Cyanogen or Bliss, I lose all of the mobile data , the baseband, here I include a screenshot. I have flashed a stock ROM once again, activated it again without any problem, but when I try to flash an AOSP ROM again I lose everything. Is there anything I can do about that? I have searched the forums and Google and found no solutions. Any help would be greatly appreciated.
Click to expand...
Click to collapse
Flash the file here: http://androidforums.com/threads/mo...apn-fix-wip-cm-aosp-4-4-x.840298/#post6516416
It will modify necessary files in the system to allow you to connect. Also, dial ##72786# to reactivate after flashing. That all worked for me on my Virgin S3 running Carbon. Good luck!
The SPH-L710T is what was on sale at BestBuy for $80 (as I found out after running into a similar problem), and it's a pain in the ass. It seems that TW ROMs are the only ones that don't break the radio... and the M10 snapshot of CM11 apparently (except rotation is backwards). I'm looking for a fix as well.
It seems that all of this can be fixed by a custom kernel, but there's no AOSP/CM kernel (that I know of) that fixes both.
I wish I knew something about kernel development...
kdude63 said:
The SPH-L710T is what was on sale at BestBuy for $80 (as I found out after running into a similar problem), and it's a pain in the ass. It seems that TW ROMs are the only ones that don't break the radio... and the M10 snapshot of CM11 apparently (except rotation is backwards). I'm looking for a fix as well.
It seems that all of this can be fixed by a custom kernel, but there's no AOSP/CM kernel (that I know of) that fixes both.
I wish I knew something about kernel development...
Click to expand...
Click to collapse
That is exactly the one that I have, the 80$ Best Buy from Black Friday. Yeah, I tried what metalhead131 said and it did not work. Hmmm, M10 snapshot worked for you? I will try it out them to see how it goes. In what way did it break the rotation? It does not rotate or is it inaccurate? It is a pain in the ass that we have so many ROMS available but we can't use them. I have been using the Conquest Singularity by Moon Knight. The one that is here in XDA is kinda of outdated but if you Google it you will find his blog with the latest update. He created an AOSP looking ROM but it is TW underneath. That combined with Gravity Box has satisfied me for now, but I hate no being able to flash AOSP ROMS. I know nothing about kernel development, but if someone wants to help with this I can provide anything they need in order to fix this problem with this T version of the phone.
I will try to take the kernel of the M10 and flash it with another ROM to see if the rotation works. I will update as soon as I do that.
luisro said:
That is exactly the one that I have, the 80$ Best Buy from Black Friday. Yeah, I tried what metalhead131 said and it did not work. Hmmm, M10 snapshot worked for you? I will try it out them to see how it goes. In what way did it break the rotation? It does not rotate or is it inaccurate? It is a pain in the ass that we have so many ROMS available but we can't use them. I have been using the Conquest Singularity by Moon Knight. The one that is here in XDA is kinda of outdated but if you Google it you will find his blog with the latest update. He created an AOSP looking ROM but it is TW underneath. That combined with Gravity Box has satisfied me for now, but I hate no being able to flash AOSP ROMS. I know nothing about kernel development, but if someone wants to help with this I can provide anything they need in order to fix this problem with this T version of the phone.
I will try to take the kernel of the M10 and flash it with another ROM to see if the rotation works. I will update as soon as I do that.
Click to expand...
Click to collapse
Yeah, the radio worked with the M10 snapshot. I was able to get the latest version of ParanoidAndroid to work with the M10 snapshot kernel as well.
When I say rotation is broken I mean when you hold it sideways, it rotates the wrong way, so it's upside down.
kdude63 said:
Yeah, the radio worked with the M10 snapshot. I was able to get the latest version of ParanoidAndroid to work with the M10 snapshot kernel as well.
When I say rotation is broken I mean when you hold it sideways, it rotates the wrong way, so it's upside down.
Click to expand...
Click to collapse
Excellent. Thanks for the good news! That doesn't bother me that much, so I will do that with the Bliss ROM that I wanted to install. I will keep investigating and trying things to see if we can fix the rotation issue. I will keep the thread updated.
Semi-Fix for the rotation issue on the M10 kernel.
After checking some apps out, I found one that worked well for the rotation problem using AOSP ROMS on the troublesome SPH-L710T. The app is called Adaptive Rotation Lock and is available for free on the Play Store. What it does is that a little button pops up everytime you rotate your phone, and if you don't click that button the screen will not rotate. So once you put your phone horizontallly, click on the button that pops up to allow the phone to rotate upside-down, then rotate the phone so it is not upside-down anymore, but do not click the button, so it stays in the correct rotation. It is a little cumbersome, but it beats always being upside down while using the phone horizontally! I think this is a good option while we find out how to fix this issue in the kernel.
kdude63 said:
Yeah, the radio worked with the M10 snapshot. I was able to get the latest version of ParanoidAndroid to work with the M10 snapshot kernel as well.
When I say rotation is broken I mean when you hold it sideways, it rotates the wrong way, so it's upside down.
Click to expand...
Click to collapse
Greeting kdude63. Thanks to your tips I was able to test many roms and as you settled on Paranoid Android. The only problem I have right now is that intermittently point I lose cell coverage for like 2 minutes, but then I get it back. Does that happen on your phone?
I have also tried many kernels to see if I find another one that works but no go. I am still using the M10 boot.img. Have you found another one that works?
And thanks for helping out with the ODIN tar for this phone! It makes me feel a lot more safe when I am experimenting.
Sent from my SPH-L710 using XDA Free mobile app
luisro said:
Greeting kdude63. Thanks to your tips I was able to test many roms and as you settled on Paranoid Android. The only problem I have right now is that intermittently point I lose cell coverage for like 2 minutes, but then I get it back. Does that happen on your phone?
I have also tried many kernels to see if I find another one that works but no go. I am still using the M10 boot.img. Have you found another one that works?
And thanks for helping out with the ODIN tar for this phone! It makes me feel a lot more safe when I am experimenting.
Sent from my SPH-L710 using XDA Free mobile app
Click to expand...
Click to collapse
I don't currently use PA or CM as my daily driver, so I don't know. (I don't like dealing with the rotation issues)
I was testing some other kernels earlier, none of them worked before I got careless and accidentally flashed an i9300 kernel, so I can't use my phone for the time being.
Cnexus and several others have posted debrick images and stock ROMS for various versions of the s3. Good luck debricking
Sent from my CarbonROM 4.4.4 SPH-L710
luisro said:
Good evening everyone. I recently got this phone from the Black Friday deal at Best Buy for 80$ and rooted and did all of that without much problem. I installed the Wicked ROM without any issues, and tested it out but I prefer AOSP. But when I flash Cyanogen or Bliss, I lose all of the mobile data , the baseband, here I include a screenshot. I have flashed a stock ROM once again, activated it again without any problem, but when I try to flash an AOSP ROM again I lose everything. Is there anything I can do about that? I have searched the forums and Google and found no solutions. Any help would be greatly appreciated.
Click to expand...
Click to collapse
wait you had success flashing wicked????? which one????? that's my favorite rom I'm running Conquest at the moment tried to flash Wicked X bare-bones on the new T model but it didn't work sadly :'(
---------- Post added at 03:06 PM ---------- Previous post was at 02:54 PM ----------
metalhead131 said:
Cnexus and several others have posted debrick images and stock ROMS for various versions of the s3. Good luck debricking
Sent from my CarbonROM 4.4.4 SPH-L710
Click to expand...
Click to collapse
The debrick image for the T model was just barely posted last week in Android Forms....and there is a thread in the questions section here on XDA that has it linked
6th_Hokage said:
wait you had success flashing wicked????? which one????? that's my favorite rom I'm running Conquest at the moment tried to flash Wicked X bare-bones on the new T model but it didn't work sadly :'(
---------- Post added at 03:06 PM ---------- Previous post was at 02:54 PM ----------
The debrick image for the T model was just barely posted last week in Android Forms....and there is a thread in the questions section here on XDA that has it linked
Click to expand...
Click to collapse
Yep, I flashed it normally. Using Philz I got the Wicked 8 zip file and a couple of the addons that are available without any problems but since I don't like the Touchwiz UI too much I am currently running Conquest. Maybe try the full Wicked 8 zip? I did not try the barebones, but I can confirm that Wicked 8 works on the T model. It has the rotation issue but a couple of post ago I described how to get around that. Let me know if it works!
Sent from my SPH-L710 using XDA Free mobile app
luisro said:
Yep, I flashed it normally. Using Philz I got the Wicked 8 zip file and a couple of the addons that are available without any problems but since I don't like the Touchwiz UI too much I am currently running Conquest. Maybe try the full Wicked 8 zip? I did not try the barebones, but I can confirm that Wicked 8 works on the T model. It has the rotation issue but a couple of post ago I described how to get around that. Let me know if it works!
Sent from my SPH-L710 using XDA Free mobile app
Click to expand...
Click to collapse
i was finally able to flash bare-bones i had to flash the updated kernel i used for Conquest beta 10
I'm glad! At least we can use Touchwiz based ROMs while we can find a way to create a kernel that is completely compatible with the T model. Is your rotation working correctly?
Sent from my SPH-L710 using XDA Free mobile app
luisro said:
I'm glad! At least we can use Touchwiz based ROMs while we can find a way to create a kernel that is completely compatible with the T model. Is your rotation working correctly?
Sent from my SPH-L710 using XDA Free mobile app
Click to expand...
Click to collapse
Yes rotation is working and with the next few updates on CM side they will be fully working on the T model cause CM already updated a fix for the T model
I got spooked when the baseband disappeared and rotation was not working. Went back to stock. Of course you also seem to need the special 2.7 twrp in order to mount system. But the price was right.
Sent from my SPH-L710T using XDA Free mobile app
So i am coming to hate this phone's lack of mods and roms
are any of the international roms compatible with this device that anyone has found?
I'm finding out that u can flash the edge roms with the standard s6 kernels
Sent from my SM-G920P using XDA Free mobile app
What ROM you on right now? I would love to try out SACs Sprint S6 Edge ROM, but I'm scared to bc of not having a recovery and being able to do a nandroid haha.
We just need to wait it out. No other choice ?
JoeFCaputo113 said:
What ROM you on right now? I would love to try out SACs Sprint S6 Edge ROM, but I'm scared to bc of not having a recovery and being able to do a nandroid haha.
Click to expand...
Click to collapse
Just do a full backup on flashfire should be fine
Sent from my SM-G920P using Tapatalk
Just got my S6 from Sprint today I take it it is still in new development phases for ROMS??? Sorry I have been out of touch and on that I word crap for the last year........
I am running Sacs with the ktoonz kernel. No issues as of yet. Native hotspot...knox removed....good stuff...
Did you trip knox flashing the rom or kernel ?
beef356 said:
Did you trip knox flashing the rom or kernel ?
Click to expand...
Click to collapse
Mine did, but that was my choice. Used TWRP and just flashed the "old school" way. But have seen reports of people flashing this ROM with flashfire with no Knox trip
Rocklee99 said:
I'm finding out that u can flash the edge roms with the standard s6 kernels
Sent from my SM-G920P using XDA Free mobile app
Click to expand...
Click to collapse
Good to know. I hadn't gotten in this forum until today. I decided to purchase the S6 because I could get it at a steal, and now is a great time to sell my S5, but I was having buyers remorse because of the lack of development.
I can't complain because I'm lazy and don't want to learn to do it myself.
adamdelozier said:
I am running Sacs with the ktoonz kernel. No issues as of yet. Native hotspot...knox removed....good stuff...
Click to expand...
Click to collapse
Fingerprint scanner working?
JoeFCaputo113 said:
Fingerprint scanner working?
Click to expand...
Click to collapse
I haven't flashed this as yet, but reading the forum the issue appears for have been fixed with an updated kernel included in the current version.
You can fix fingerprint scanner and private mode in sac23s rom with XtreStoLites Aroma addon pack
can anyone point me in the right way for sacs rom ?
fog918 said:
can anyone point me in the right way for sacs rom ?
Click to expand...
Click to collapse
I believe that it is here under Edge: http://forum.xda-developers.com/spr...ment/sac23ram9200srintdeoxedmoddedv1-t3107342
wow! I may have to try this, I was a huge fan of Sac's work when I had my S4, he's a great developer!!!!!
scott_0 said:
wow! I may have to try this, I was a huge fan of Sac's work when I had my S4, he's a great developer!!!!!
Click to expand...
Click to collapse
Same!!
Took The Plunge
Installed Sac's ROM through Flashfire and found myself wondering why I waited. Got everything set up as I wanted without any problems. Do remember to flash the Ktoonsez kernel after the ROM.
I don't care about Samsung Pay and I doubt that I ever will, so I installed TWRP right after. This felt so good, I see other ROMs in my future especially since sac23 says an update is coming soon. I feel like it is my phone again.
I also may try out this ROM: http://forum.xda-developers.com/spr...ebloated-rom-samsuing-galaxy-s6-edge-t3126661
@JoeFCaputo113 you really should think about doing this.
Cheers.
koop1955 said:
Installed Sac's ROM through Flashfire and found myself wondering why I waited. Got everything set up as I wanted without any problems. Do remember to flash the Ktoonsez kernel after the ROM.
I don't care about Samsung Pay and I doubt that I ever will, so I installed TWRP right after. This felt so good, I see other ROMs in my future especially since sac23 says an update is coming soon. I feel like it is my phone again.
I also may try out this ROM: http://forum.xda-developers.com/spr...ebloated-rom-samsuing-galaxy-s6-edge-t3126661
@JoeFCaputo113 you really should think about doing this.
Cheers.
Click to expand...
Click to collapse
@scott_0 did the same thing and all is running well for him too! What steps did you take exactly? Thanks for sharing buddy!
I should add this to my Rooting/Mods thread!
JoeFCaputo113 said:
@scott_0 did the same thing and all is running well for him too! What steps did you take exactly? Thanks for sharing buddy!
I should add this to my Rooting/Mods thread!
Click to expand...
Click to collapse
Using FlashFire (which I know that you have!):
Step 1: Choose Backup if you want. Then let that do its thing.
Step 2: After back, choose Wipe and accept defaults.
Step 3: Select the two zips, ROM and Kernel.
Step 4: Let her rip!
Different ROM, but this video helped me: https://www.youtube.com/watch?v=SJSP8XsET8o
IF YOU INSTALL TWRP:
For anyone that does (and I did) there is a fix for the deep sleep issue posted here: http://forum.xda-developers.com/showpost.php?p=60383471&postcount=49