Related
SHG-T989 on TMO. I was running CM 9.0 but wanted to update to 9.1. NOW I CANT DO ANYTHING!!! Here is what I did:
1. Downloaded the CM9.1. 2. did a backup through CWM. 3. wiped data through CWM, "wipe data/factory reset. 4. wiped cache partition through CWM. 5. did a Darkside Super Wipe through "install zip from internal sd card" (last time installing CM9 i got stuck in the boot screen and had to go back using Darkside Super Wipe, reinstall CM9 and it worked fine). 6. Reboot to recovery. 7. installed CM9.1 through "install zip from sdcard". 8. installed gapps through "install zip from sdcard". 9. Reboot.
It came up and was stuck in the CM9 boot screen. So I went back in through CWM and tried to "wipe data/factory reset" and it wont work! Tried to go back to stock through Odin and it wont work! When i try to wipe data, the process starts and completes the "formatting /data, then gets stuck at formatting /cache. Does the same thing if I try to wipe the cache.
Im completely stuck and have no phone.
Which recovery version are you using? It might a corrupted recovery.
Try this recovery TWRP is cwm flashable:
SGH-T989_TWRP_v2.2.2.0.zip - 6.72 MB
Then TDJs super wipe and then install the stock ROM or any other ROM.
http://forum.xda-developers.com/showthread.php?t=1858435
Sent from my SGH-T989 w/AOKP JB Sept-12-12 using XDA app.
any updates to this? i'm having basically the exact same problem, formatting cache or anything to do with that partition freezes up on me.
using cwm 5.0.2.7 did a darkside super wipe, flashed on a JB rom (P.A.Cman), flashed gapps (20121011), wiped cache, wiped dalvik cache, rebooted then got stuck on boot animation. rebooted back into cwm to try and wipe again and reinstall, no luck got stuck on formatting cache.
loaded up my nandroid which went fine, ended up installing twrp instead to see if that would help, rebooted into recovery and was stuck on the "teamwin" blue screen and wouldn't go further multiple times. so, put cwm back on (6.0.1.5) to see if the updated version would work. nope, same thing- can't do anything with the cache partition.
any ideas??
luckily my phone still works fine with the backup i made. running aokp ics build 40, streamline #27 kernel, uvle1 radio. been running that setup since july with no real problems, just wanted to try out JB finally and seems now i can't
any help is appreciated! thanks!
edit: will try the above post^ later tonight, just thought i'd see if i could get some more options to try out. thanks.
wwwwd83 said:
SHG-T989 on TMO. I was running CM 9.0 but wanted to update to 9.1. NOW I CANT DO ANYTHING!!! Here is what I did:
1. Downloaded the CM9.1. 2. did a backup through CWM. 3. wiped data through CWM, "wipe data/factory reset. 4. wiped cache partition through CWM. 5. did a Darkside Super Wipe through "install zip from internal sd card" (last time installing CM9 i got stuck in the boot screen and had to go back using Darkside Super Wipe, reinstall CM9 and it worked fine). 6. Reboot to recovery. 7. installed CM9.1 through "install zip from sdcard". 8. installed gapps through "install zip from sdcard". 9. Reboot.
It came up and was stuck in the CM9 boot screen. So I went back in through CWM and tried to "wipe data/factory reset" and it wont work! Tried to go back to stock through Odin and it wont work! When i try to wipe data, the process starts and completes the "formatting /data, then gets stuck at formatting /cache. Does the same thing if I try to wipe the cache.
Im completely stuck and have no phone.
Click to expand...
Click to collapse
Ok, the wipe scripts in CWM recovery v5 are broken! Got experience there because I got stuck on the PACman ROM boot animation.
So, for factory reset, use Darkside Super Wipe. Install zip from sdcard and choose the wipe. From there, install rom, then gapps, and then use the Darkside Cache Wipe. After that reboot and it should work (hopefully)
However the most important thing is that the wipes don't work in CWM recovery v6! It will do bad things!
So yeah, use super wipe to factory reset. Use cache wipe for cache. But follow the instructions to install the ROM.
Sent from my SAMSUNG-SGH-T989 using xda premium
m tr4nch said:
any updates to this? i'm having basically the exact same problem, formatting cache or anything to do with that partition freezes up on me.
using cwm 5.0.2.7 did a darkside super wipe, flashed on a JB rom (P.A.Cman), flashed gapps (20121011), wiped cache, wiped dalvik cache, rebooted then got stuck on boot animation. rebooted back into cwm to try and wipe again and reinstall, no luck got stuck on formatting cache.
loaded up my nandroid which went fine, ended up installing twrp instead to see if that would help, rebooted into recovery and was stuck on the "teamwin" blue screen and wouldn't go further multiple times. so, put cwm back on (6.0.1.5) to see if the updated version would work. nope, same thing- can't do anything with the cache partition.
any ideas??
luckily my phone still works fine with the backup i made. running aokp ics build 40, streamline #27 kernel, uvle1 radio. been running that setup since july with no real problems, just wanted to try out JB finally and seems now i can't
any help is appreciated! thanks!
edit: will try the above post^ later tonight, just thought i'd see if i could get some more options to try out. thanks.
Click to expand...
Click to collapse
got it all working again.. ended up odin flashing twrp 2.2 and i was able to boot into it, wipe everything, and install the new rom stuff.
Similar problem, but cannot make zips to work - HELP NEEDED
HI,
I hope you guys can help me. My T989 got stucked in the splash screen when I tried to update to a nightly CM10 ROM. I entered into Recovery MOde (ClockworkMod 6.0.2.7), then tried to use Darkside Super Wipe... but apparently the phone cannot open zip files. When I hit install zip from sdcard and then select one of the zips (I have tried different ones) it says "---Installing: /sdcard/sgh-t989_darkside.supe.wipe.zip"... but it does not move from there. After 3-4 minutes it reboots by itself and gets back to the splash animation, but never goes beyond that point.
I tried to sideload using ADB, but the phone is not recognized by my PC.
As you said, I think that the recovery mode is corrupted... but I cannot install a new version using a zip
Is there another way to reinstall a version of CWM that allows me to install zips so that I can follow the process you suggested (super wipe + installing ROMS)?
Help will be very much appreciated
Thanks for your time,
Enrique
thatdude02 said:
Ok, the wipe scripts in CWM recovery v5 are broken! Got experience there because I got stuck on the PACman ROM boot animation.
So, for factory reset, use Darkside Super Wipe. Install zip from sdcard and choose the wipe. From there, install rom, then gapps, and then use the Darkside Cache Wipe. After that reboot and it should work (hopefully)
However the most important thing is that the wipes don't work in CWM recovery v6! It will do bad things!
So yeah, use super wipe to factory reset. Use cache wipe for cache. But follow the instructions to install the ROM.
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
kikorras said:
HI,
I hope you guys can help me. My T989 got stucked in the splash screen when I tried to update to a nightly CM10 ROM. I entered into Recovery MOde (ClockworkMod 6.0.2.7), then tried to use Darkside Super Wipe... but apparently the phone cannot open zip files. When I hit install zip from sdcard and then select one of the zips (I have tried different ones) it says "---Installing: /sdcard/sgh-t989_darkside.supe.wipe.zip"... but it does not move from there. After 3-4 minutes it reboots by itself and gets back to the splash animation, but never goes beyond that point.
I tried to sideload using ADB, but the phone is not recognized by my PC.
As you said, I think that the recovery mode is corrupted... but I cannot install a new version using a zip
Is there another way to reinstall a version of CWM that allows me to install zips so that I can follow the process you suggested (super wipe + installing ROMS)?
Help will be very much appreciated
Thanks for your time,
Enrique
Click to expand...
Click to collapse
Do NOT use that darkside superwipes with CWM recovery v6.X.X.X. Does bad things.
Use the scripts only for CWM v5.X.X.X.
Anyway, the damage is done and bad things have happened... So maybe check here
http://forum.xda-developers.com/showthread.php?t=1513359
Either that or you can search the forum and Google around and see what you can find. I am in by no means an expert, but depending if you can access the recovery mode or not might be the key here.
I wish you luck, and hope that you don't have a very expensive brick.
Sent from my SAMSUNG-SGH-T989 using xda premium
Use Odin. There is a tutorial on how to revert to stock GB (might be ICS) in the T989 development forum. It should be a sticky in that forum.
Ditto issues.. Thank good for search function. Read.. Read.. Read..
Sent from my SGH-T989 using xda app-developers app
Tried your suggestion, but Odin won't recognize my phone
Hi there,
Thank you very much for the answer. I actually spent hours trying to find something before I posted my question. Even before posting I found and tried the method using Odin... but my phone is not recognized by Odin. I followed the instructions but on step 4 I actually do not get any "warning" screen... and then the phone is not recognized.
In the meantime, I can get into recovery, but I cannot install any zips. I have tried to complete a factory reset, but the process gets stuck at "Formating /cache..." and then reboots. When I try to install a zip (any zip, the radio, a new ROM, gapps,... any zip really) it gets stuck too.
Any other ideas? I really appreciate your help.
thatdude02 said:
Do NOT use that darkside superwipes with CWM recovery v6.X.X.X. Does bad things.
Use the scripts only for CWM v5.X.X.X.
Anyway, the damage is done and bad things have happened... So maybe check here
http://forum.xda-developers.com/showthread.php?t=1513359
Either that or you can search the forum and Google around and see what you can find. I am in by no means an expert, but depending if you can access the recovery mode or not might be the key here.
I wish you luck, and hope that you don't have a very expensive brick.
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
kikorras said:
Hi there,
Thank you very much for the answer. I actually spent hours trying to find something before I posted my question. Even before posting I found and tried the method using Odin... but my phone is not recognized by Odin. I followed the instructions but on step 4 I actually do not get any "warning" screen... and then the phone is not recognized.
In the meantime, I can get into recovery, but I cannot install any zips. I have tried to complete a factory reset, but the process gets stuck at "Formating /cache..." and then reboots. When I try to install a zip (any zip, the radio, a new ROM, gapps,... any zip really) it gets stuck too.
Any other ideas? I really appreciate your help.
Click to expand...
Click to collapse
The only other possible option I can think is to try and install another recovery....
However!
I have no clue how to do it, and in the end you might just end up making the issue worse.... Like hard brick it.
I might think of something later, but I don't know what else I can do for you. I will search around, but no promises...
Best of luck to you
--edit--
Ok try here possibly
http://forum.xda-developers.com/showthread.php?t=1777970
I have seen a few posts saying that they just install this recovery and then restore a backup.
Ok to be honest, try restoring a backup first and see if anything happens there, and then try this thread.
However like before, this may make the problem worse! Proceed with caution and read and understand everything before attempting.
Hope you can get your phone back to functional!
Sent from my SAMSUNG-SGH-T989 using xda premium
samsung jig
Thanks again for the answer. A couple of days ago I tried to install a functional backup that I had from CWM... but it does not work It runs for a long while, then reboots... but it still freezes on the splash screen (my theory is that the backup is not recovered, as I know for sure that the ROM I backed up did work fine)... I think that CWM is corrupted and not working properly.
Then I tried the solution from the thread you mentioned... but adb cannot find the phone when it is connected
I found somewhere that I can use a samsung jig (microUSB with a resistance) to make the phone enter into download mode, then reinstall CWM using ODIN and then try flashing a stable ROM... What do you guys think?
thatdude02 said:
The only other possible option I can think is to try and install another recovery....
However!
I have no clue how to do it, and in the end you might just end up making the issue worse.... Like hard brick it.
I might think of something later, but I don't know what else I can do for you. I will search around, but no promises...
Best of luck to you
--edit--
Ok try here possibly
http://forum.xda-developers.com/showthread.php?t=1777970
I have seen a few posts saying that they just install this recovery and then restore a backup.
Ok to be honest, try restoring a backup first and see if anything happens there, and then try this thread.
However like before, this may make the problem worse! Proceed with caution and read and understand everything before attempting.
Hope you can get your phone back to functional!
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
kikorras said:
Thanks again for the answer. A couple of days ago I tried to install a functional backup that I had from CWM... but it does not work It runs for a long while, then reboots... but it still freezes on the splash screen (my theory is that the backup is not recovered, as I know for sure that the ROM I backed up did work fine)... I think that CWM is corrupted and not working properly.
Then I tried the solution from the thread you mentioned... but adb cannot find the phone when it is connected
I found somewhere that I can use a samsung jig (microUSB with a resistance) to make the phone enter into download mode, then reinstall CWM using ODIN and then try flashing a stable ROM... What do you guys think?
Click to expand...
Click to collapse
I've heard about the jig method as well, but have no idea on how to go about doing it. Might be worth a shot. I don't think the jig costs that much anyway. I will see if I can find anything later.
Sent from my SAMSUNG-SGH-T989 using xda premium
Okay, I searched before posting. Here is my steps.
I was on SKYNOTE 8.2 and wanted to go back to stock and see what At&t's update was about.
Once back to stock, I rooted my phone and have been on this setup for about 2 weeks.
I was in the original thread and saw the new 4.2.2 Collective AoCP / CM10.1 ROM.
I wanted to try it out.
Using TWRP's latest, followed all instructions and when rebooting it still has stock root ROM.
What am I doing wrong?
I thought it was TWRP so I went to an earlier ver, still no change.
I've tried 4 times now to flash this 4.2.2 Rom and nothing.
Factory Reset
Wiped Dalvik
Install Zip
Install gapps
It says to wipe cache and data again
then boot up
It boots up alright, right into my old phone.
Any input I can get is appreciated guys !!!! Thanks.
Copy the ROM to your device (some storage folder)
Boot directly to TWRP
Manually install the ROM and the appropriate GAPPS
(watch the script window and see what it says.. look for errors)
Clear caches and dalvik
reboot
LuckyColdJohnson said:
Okay, I searched before posting. Here is my steps.
I was on SKYNOTE 8.2 and wanted to go back to stock and see what At&t's update was about.
Once back to stock, I rooted my phone and have been on this setup for about 2 weeks.
I was in the original thread and saw the new 4.2.2 Collective AoCP / CM10.1 ROM.
I wanted to try it out.
Using TWRP's latest, followed all instructions and when rebooting it still has stock root ROM.
What am I doing wrong?
I thought it was TWRP so I went to an earlier ver, still no change.
I've tried 4 times now to flash this 4.2.2 Rom and nothing.
Factory Reset
Wiped Dalvik
Install Zip
Install gapps
It says to wipe cache and data again
then boot up
It boots up alright, right into my old phone.
Any input I can get is appreciated guys !!!! Thanks.
Click to expand...
Click to collapse
Try wiping cache/delvik cache, then factory reset twice, then system wipe twice, Install .zip, Install GApps, then wipe cache/delvik again(don't wipe data after .zip is installed. That's how I always do it and it works great.
I think its my recovery Twrp. I changed something.
adam_wingert said:
Try wiping cache/delvik cache, then factory reset twice, then system wipe twice, Install .zip, Install GApps, then wipe cache/delvik again(don't wipe data after .zip is installed. That's how I always do it and it works great.
Click to expand...
Click to collapse
I have tried everything. Its got to be the recovery. No matter what I do in twrp, nothing changes. It says updating partitions and stimulating actions
. It also says successful. After updating to the newest twrp it started this. I changed something. ##[email protected] went into settings and reset....nothing. What if I flashed CWM and then went back to TWRP.
LuckyColdJohnson said:
I have tried everything. Its got to be the recovery. No matter what I do in twrp, nothing changes. It says updating partitions and stimulating actions
. It also says successful. After updating to the newest twrp it started this. I changed something. ##[email protected] went into settings and reset....nothing. What if I flashed CWM and then went back to TWRP.
Click to expand...
Click to collapse
Try cf auto root to reinstall stock then reinstall twrp through odin
Sent from my GT-N7105 using xda premium
What have I done ?
Android The Greek said:
Try cf auto root to reinstall stock then reinstall twrp through odin
Sent from my GT-N7105 using xda premium
Click to expand...
Click to collapse
Okay guys....This has made me sick to my stomach.....I have tried all the different methods. I even soft bricked my phone today using CWM.
Kies wouldnt even fix my phone.
I had to download stock firmware and flash via Odin to get back.
Installed TWRP
Rooted
Went into recovery and wiped everything again
Installed the custom ROM
Rebooted
TWRP didnt do anything even though it says it did.
My phone boots up like normal with Att logo and works but no Custom Rom and no wipes.
What is this? Im going to try other things but wow, this is crazy.
On my SD card I have alot of stuff. I also have a folder named TWRP, it has a back up in there. I wonder if I should remove that?
IDK,,,,,Stuck with Stock root for now. Help If you can. Never had this issue before. What a day
LuckyColdJohnson said:
Okay guys....This has made me sick to my stomach.....I have tried all the different methods. I even soft bricked my phone today using CWM.
Kies wouldnt even fix my phone.
I had to download stock firmware and flash via Odin to get back.
Installed TWRP
Rooted
Went into recovery and wiped everything again
Installed the custom ROM
Rebooted
TWRP didnt do anything even though it says it did.
My phone boots up like normal with Att logo and works but no Custom Rom and no wipes.
What is this? Im going to try other things but wow, this is crazy.
On my SD card I have alot of stuff. I also have a folder named TWRP, it has a back up in there. I wonder if I should remove that?
IDK,,,,,Stuck with Stock root for now. Help If you can. Never had this issue before. What a day
Click to expand...
Click to collapse
Might as well try everything. wipe your sd card in twrp,if that doesn't work reformat through android when booted. Then copy the custom rom over and try again. Only other thing I can think to try is to check that all partitions that are needed are mounted, or try CWM instead.
Also, how did you install TWRP? Through the app? that is the best way to do it, I have had problems flashing twrp through CWM or through the computer. If you aren't already, use goomanager to install it. TWRP has instructions on their website
I figured it out!!!!!!!
Doggydude said:
Might as well try everything. wipe your sd card in twrp,if that doesn't work reformat through android when booted. Then copy the custom rom over and try again. Only other thing I can think to try is to check that all partitions that are needed are mounted, or try CWM instead.
Also, how did you install TWRP? Through the app? that is the best way to do it, I have had problems flashing twrp through CWM or through the computer. If you aren't already, use goomanager to install it. TWRP has instructions on their website
Click to expand...
Click to collapse
It was the settings in TWRP. One of the boxes was checked. Sim actions for theming. I unchecked that and was on my way. Rocking The Collective AoCP now !!!!! Yes.....Thanks to all of you for your input. I'm going back to each and will hit thanks right now! Thanks again XDA members.
Lucky
I'm glad things worked out... isn't it amazing how attached we get to our toys
Sent from my GT-N7105 using Tapatalk 2
Hey guys,
I was installing the synergy rom r484 onto my galaxy s3 att variant and in the aroma installer it says that my device is d2spr but my device is actually d2att and I think that is why when I install the synergy rom it doesn't let me use my data and 4g. Can anyone help with this?
update your recovery with a d2att one. are you cwm or twrp?
I'm using cwm. Can you please guide me how to update the recovery to the d2att one? haha sorry I'm kind of a noob
let's see if this gets you straightened out. flash this in recovery, go to advanced and select reboot recovery. once back in, give synergy a shot again. do you know what version you're on now and where you got your current cwm from? just curious
xBeerdroiDx said:
let's see if this gets you straightened out. flash this in recovery, go to advanced and select reboot recovery. once back in, give synergy a shot again. do you know what version you're on now and where you got your current cwm from? just curious
Click to expand...
Click to collapse
When I tried to flash that file it started and then said "Installation aborted"
I've attached a picture
Oh and I'm not sure what version I'm running
can you boot into your device? if so, use Rom Manager to update your recovery.
if not, here is the previous version of CWM if you want to see if this takes care of you.
also, twrp is recommended for aroma installers. i'll attach a recovery flashable twrp zip. let me know if either flashes. if not, you may have to restore a backup (if you cant boot in now) and update your recovery that way.
xBeerdroiDx said:
can you boot into your device? if so, use Rom Manager to update your recovery.
if not, here is the previous version of CWM if you want to see if this takes care of you.
also, twrp is recommended for aroma installers. i'll attach a recovery flashable twrp zip. let me know if either flashes. if not, you may have to restore a backup (if you cant boot in now) and update your recovery that way.
Click to expand...
Click to collapse
I flashed the twrp.zip and then I tried installing synergy again and it finished and started rebooting and now it's in a continuous loop of rebooting
get it fixed?
if not, wipe cache and dalvik in recovery and reboot. if you're still looping, boot into recovery and wipe data/factory reset and reboot. report back, buddy
xBeerdroiDx said:
get it fixed?
if not, wipe cache and dalvik in recovery and reboot. if you're still looping, boot into recovery and wipe data/factory reset and reboot. report back, buddy
Click to expand...
Click to collapse
I've tried rebooting into recovery multiple times but it goes to the Team Win recovery screen and then goes back into the boot loop :crying:
odin back to stock, buddy. thats what i would do.
here's a link to the stock firmware with root already injected: http://forum.xda-developers.com/show....php?t=1739426
flash the tar in odin. make sure the auto reboot box is unticked. if you get a PASS after flashing, unplug the device, pull the battery, replace it and press the recovery button combo. once in recovery, wipe data and wipe cache. reboot.
you will be on rooted stock. you can install cwm or twrp from rom manager or goo manager from there.
otherwise, your other option is to flash recovery from odin via this link: http://forum.xda-developers.com/showthread.php?t=2042775
download the root kit and flash the recovery.tar from odin. boot into recovery and flash that cwm 6.0.3.1 update i linked you to earlier. reboot recovery (under advanced) and proceed with flashing synergy or flash this recovery-flashable stock rom to get you started. you can decide where you want to go from there.
xBeerdroiDx said:
odin back to stock, buddy. thats what i would do.
here's a link to the stock firmware with root already injected: http://forum.xda-developers.com/show....php?t=1739426
flash the tar in odin. make sure the auto reboot box is unticked. if you get a PASS after flashing, unplug the device, pull the battery, replace it and press the recovery button combo. once in recovery, wipe data and wipe cache. reboot.
you will be on rooted stock. you can install cwm or twrp from rom manager or goo manager from there.
otherwise, your other option is to flash recovery from odin via this link: http://forum.xda-developers.com/showthread.php?t=2042775
download the root kit and flash the recovery.tar from odin. boot into recovery and flash that cwm 6.0.3.1 update i linked you to earlier. reboot recovery (under advanced) and proceed with flashing synergy or flash this recovery-flashable stock rom to get you started. you can decide where you want to go from there.
Click to expand...
Click to collapse
If I odin back to stock will it delete all my music and pictures and etc.?
Okay I'll try the second thing and I'll report back in a bit. Thank you so much for taking the time to help me.
Okay so I got that recovery that you gave me earlier installed (the cwm 6.0.1.3) after using odin and the att gs3 root and then flashing after that. Then when I went back into recovery and tried to install the synergy rom it started and then the aroma installer froze and my phone went back into the loop. I can get into recovery now though but I don't know how I should install synergy
Honestly? This is a picky rom. I would abandon it for a more stable install and operational rom, whether that be a touchwiz base or aosp. It doesn't seem to be working with you at all.
Okay I installed the cyanogen mod stable build and now I'm just waiting for it to finish booting up. Thank you so much for all your help!!!
That's what we're all here for. Lemme know if that did/didn't boot up for ya :good:
Okay it's still at the same booting screen where it says CyanogenMod and the blue circle is spinning around it.
Wipe data/factory reset, wipe cache and dalvik. Reflash rom and gapps. Wipe data and cache again. Reboot and give it a few minutes.
That's my suggestion.
Routed by Galaxy S3
xBeerdroiDx said:
Wipe data/factory reset, wipe cache and dalvik. Reflash rom and gapps. Wipe data and cache again. Reboot and give it a few minutes.
That's my suggestion.
Click to expand...
Click to collapse
My Galaxy at&t phone had the same problem after flashing with Synergy (my first flash on my new Galaxy S3 phone). It lost its identity and though it was a Sprint phone. Next I tried installing a different custom ROM, but I couldn't install CM10.1 (and still can't now) because it thinks it was not a d2att.
There were only two ROMs I was able to do installed since then. They were the Serenity 1.2 and its predecessor. I had to restored phone back to stock, root, and flash ROM. For a while, it was pretty grim as my phone had gotten very unresponsive and lethargic with all the fixes I tried during the time my phone thought it was a d2sp (no data).
After going back to stock using Odin, the phone finally could accessed the data network again and showing SGH-I747 instead of the Sprint version. I tried flashing CM10.1, but it still didn't think it is a d2att since it aborted when it did the check for d2att.
Nest, I flashed the DrewGaren's JellyBean747 version 1. Then I flashed DrewGaren's Serenity 1.2. Both were mostly working OK, but there are still some bugs.
Unfortunately, the DrewGaren's series seem to be dead projects since he didn't seem to be doing anymore improvement since Jan 2013.
Samsung S3 had me routed. My previous phone was HTC Inspired, and I rooted it instead of it routing me
Hi
I was flashing back to Stock from task650 to fix my gps. Well something blew up and when the phone reboots the screen goes black but I hear the AT&T start-up tune. Essentially I can't get to enable USB debugging to reflash. I can get to download or recovery, but there are no files to recover<?> and busybox never got installed.
What do I do now?
Do you have the stock recovery now? If so, try going in there and resetting to defaults. That helps sometimes.
Otherwise, you may need to Odin back to stock if you still want to go stock.
CZ Eddie said:
Do you have the stock recovery now? If so, try going in there and resetting to defaults. That helps sometimes.
Otherwise, you may need to Odin back to stock if you still want to go stock.
Click to expand...
Click to collapse
Yes I have stock recovery. Odin is of no use because it hangs waiting for the USB debug to respond. And i can't turn it on because the screen is black and I can't navigate
Do you have a micro sd card? If so, throw a rom on there. If you want to go back to stock, there' a flashable stock zip at the bottom of post #2 in the link in my signature. Under the emergency toolkit section. Flash that, turn on use debugging, do your gps fix and continue on with the task release
xBeerdroiDx said:
Do you have a micro sd card? If so, throw a rom on there. If you want to go back to stock, there' a flashable stock zip at the bottom of post #2 in the link in my signature. Under the emergency toolkit section. Flash that, turn on use debugging, do your gps fix and continue on with the task release
Click to expand...
Click to collapse
Thanks. I created an emergency tool kit on an SD, I wiped data, wiped cache and Davlik and formated system. Flashed the stock rom. When I rebooted it now hung at the Samsung Galaxy S III screen.
How do I get out of this mess?
Try wiping data and cache again in recovery
xBeerdroiDx said:
Try wiping data and cache again in recovery
Click to expand...
Click to collapse
I've wiped data and cache several times, and format/system. I've even tried to flash CWM 6.0.3.1 and I get a status 7 error. Nothing is taking.I get signature failures.
I re downloaded all the files figuring they were corrupted. Nothing doing. I need some real help, because this is beyond my abilities to figure out.,
Now I've got a red triangle showing up in recovery.
BertMor said:
I've wiped data and cache several times, and format/system. I've even tried to flash CWM 6.0.3.1 and I get a status 7 error. Nothing is taking.I get signature failures.
I re downloaded all the files figuring they were corrupted. Nothing doing. I need some real help, because this is beyond my abilities to figure out.,
Now I've got a red triangle showing up in recovery.
Click to expand...
Click to collapse
i dont know why some of these things are not working correctly for you. you're seeing the red triangle because you have stock recovery now from the stock firmware zip. you cannot flash anything in stock recovery nor can you format /system. what happens when you boot up after a factory reset and cache wipe?
a couple of your options include either using odin to flash the stock firmware back onto your device or to use odin to flash a custom recovery back and make a move from there.
xBeerdroiDx said:
i dont know why some of these things are not working correctly for you. you're seeing the red triangle because you have stock recovery now from the stock firmware zip. you cannot flash anything in stock recovery nor can you format /system. what happens when you boot up after a factory reset and cache wipe?
a couple of your options include either using odin to flash the stock firmware back onto your device or to use odin to flash a custom recovery back and make a move from there.
Click to expand...
Click to collapse
When it rains it pours. Now I can't get into recovery. I get the empty battery graphic cycling on and off, and its very warm to the touch. I think the battery is not charging.
I tried using Odin and flashed a stock rom but I kept getting verification errors and status 7 errors. Things just are not taking. I fear I've got a hard brick and I don't know what to do to fix it.
I appreciate your help
aaaaand let the questions roll:
you got verification errors in odin? and after flashing the firmware, i'm assuming you then flashed cwm and that's where you were getting the status 7 errors?
at what point did it all go off? i need to know what order you did all of these things.
can you still get into download mode?
xBeerdroiDx said:
aaaaand let the questions roll:
you got verification errors in odin? and after flashing the firmware, i'm assuming you then flashed cwm and that's where you were getting the status 7 errors?
at what point did it all go off? i need to know what order you did all of these things.
can you still get into download mode?
Click to expand...
Click to collapse
No, it won't go into download. I initially flashed stock rom, but I don't think I wiped anything. That was probably the big mistake. I used something called Samsung S3 QCom tool kit to do an initial flash. It never failed me before. And I also flashed a CWM.
I followed your advice and made a emergency SD kit and flashed from there. I did a clean flash several times. Things just never worked and I kept getting those error messages. Then it just got more difficult to get into download. Now it just flashes a drained battery
it might indeed be drained. leave it plugged in for a while and report back.
you were getting the error/status 7 messages after you flashed cwm back on it likely because the cwm wasnt up-to-date.
what was the last thing you tried before it stopped working altogether?
It gets really hot if I leave it plugged in. But it seems like I can get into recovery again. The last thing I flashed was CMW 6.0.3.1. But what is on it now is CMW 5.5.0.4
actually, what you're saying is the last thing you flashed was cwm 5.5.0.4, just via odin not cwm.
if the phone was in my hands, i would:
flash the cwm 6.0.3.1 zip, select advanced and reboot recovery. now you will be in the updated cwm recovery.
perform a full wipe: wipe data, cache, dalvik, format /system, format /data
flash rom and gapps. if you're going to stick with tasks, use the 4/23 release. i'm on that with no feature or stability issues.
wipe data, wipe cache, reboot.
give it a few minutes to boot up.
BertMor said:
No, it won't go into download. I initially flashed stock rom, but I don't think I wiped anything. That was probably the big mistake. I used something called Samsung S3 QCom tool kit to do an initial flash. It never failed me before. And I also flashed a CWM.
I followed your advice and made a emergency SD kit and flashed from there. I did a clean flash several times. Things just never worked and I kept getting those error messages. Then it just got more difficult to get into download. Now it just flashes a drained battery
Click to expand...
Click to collapse
xBeerdroiDx said:
actually, what you're saying is the last thing you flashed was cwm 5.5.0.4, just via odin not cwm.
if the phone was in my hands, i would:
flash the cwm 6.0.3.1 zip, select advanced and reboot recovery. now you will be in the updated cwm recovery.
perform a full wipe: wipe data, cache, dalvik, format /system, format /data
flash rom and gapps. if you're going to stick with tasks, use the 4/23 release. i'm on that with no feature or stability issues.
wipe data, wipe cache, reboot.
give it a few minutes to boot up.
Click to expand...
Click to collapse
Nope. When I try to flash CWM 6.0.3.1 I get an assert failed error. I came across this fix, I wonder if it is safe to try http://mobotechie.com/tips-tricks/how-to-fix-android-custom-rom-status-7-installation-abort-assert-failed-error-in-recovery-easily-ultimate-guide
BertMor said:
Nope. When I try to flash CWM 6.0.3.1 I get an assert failed error. I came across this fix, I wonder if it is safe to try http://mobotechie.com/tips-tricks/how-to-fix-android-custom-rom-status-7-installation-abort-assert-failed-error-in-recovery-easily-ultimate-guide
Click to expand...
Click to collapse
Well I think I managed it!. First I tried to install an update d/l'ed from Dropbox and that did nothing. Then I flashed an old .tar that was a rooted stock and it rebooted!
I tried editing the updater-script but I couldn't getit to save the changes properly.
Well I will now re flash the RM and CWM and hope for the best
Thanks for all your help, greatly appreciated
Hi guys,
I have a Samsung Galaxy S3 I747m, running Cyanogen Mod and as of right now, it will not turn on. It will begin the boot animation and the freeze once it reaches the end. I cannot access Recovery Mode but I can access Download Mode. This all began when my version of gapps started glitching, or at least Google play Store. I downloaded a new gapps and tried to install it without wiping out the dalvik cache or uninstalling the old gapps. Yes I am a noob at this and an idiot.
Please guys if anyone of you has the patience to tell me what I need to do to get my phone operational again. please do so. My family is not doing well financially right now and can't afford another phone. Please give me some hope. Please.
Well.....I'm not expert but I can tell you its not hard bricked. So you're safe for now. I suggest checking out how to flash another OS using download mode. I believe it involves using your sd card as a "bootable media". (Like, usb stick for windows 7)
Do some research about that. And I think it should work.
Try this!
ABCordova said:
Hi guys,
I have a Samsung Galaxy S3 I747m, running Cyanogen Mod and as of right now, it will not turn on. It will begin the boot animation and the freeze once it reaches the end. I cannot access Recovery Mode but I can access Download Mode. This all began when my version of gapps started glitching, or at least Google play Store. I downloaded a new gapps and tried to install it without wiping out the dalvik cache or uninstalling the old gapps. Yes I am a noob at this and an idiot.
Please guys if anyone of you has the patience to tell me what I need to do to get my phone operational again. please do so. My family is not doing well financially right now and can't afford another phone. Please give me some hope. Please.
Click to expand...
Click to collapse
I would try and flash a new recovery image either twrp or cwm through download mode using Odin and try getting back into recovery and clean flash cyanogenmod and gapps all over again. Basically start from scratch and see if it fixes the problem, if you can get in to recovery mode after flashing a new image you may only need to wipe cache/dalvik to fix it but I'd start with trying your best to get a recovery image reflashed and the ability to get into recovery mode. You can find the images for recovery at the official sites either twrp or clockwork recovery and the instructions on how to flash them anywhere by searching through Google! Hope this helps you
From download mode you can flash a stock firmware with Odin unless you have installed the stock 4.3 update. This will wipe your phone but you will have it booting and recovery back.
NightyNineNights said:
I would try and flash a new recovery image either twrp or cwm through download mode using Odin and try getting back into recovery and clean flash cyanogenmod and gapps all over again. Basically start from scratch and see if it fixes the problem, if you can get in to recovery mode after flashing a new image you may only need to wipe cache/dalvik to fix it but I'd start with trying your best to get a recovery image reflashed and the ability to get into recovery mode. You can find the images for recovery at the official sites either twrp or clockwork recovery and the instructions on how to flash them anywhere by searching through Google! Hope this helps you
Click to expand...
Click to collapse
Thank you so much! However, in the Clockwork Mod website, it does not say anything about downloading Clockwork Recovery. What should I do from this point? Also, some people suggest installing an entirely new OS. Would this be a better or worse solution compared to flashing Clockwork Mod Recovery?
Thank you once again!
BCSC said:
From download mode you can flash a stock firmware with Odin unless you have installed the stock 4.3 update. This will wipe your phone but you will have it booting and recovery back.
Click to expand...
Click to collapse
Another user here suggested flashing Clockwork Recovery. Which one one in your opinion is the best option and what are the disadvantages/advantages of both?
ABCordova said:
Another user here suggested flashing Clockwork Recovery. Which one one in your opinion is the best option and what are the disadvantages/advantages of both?
Click to expand...
Click to collapse
As for your previous post, the Clockwork downloads are under the 'Rom Manager' tab here: http://www.clockworkmod.com/.
Twrp recovery here: http://teamw.in/project/twrp2 (Hit 'Get TWRP for your device' then this link at bottom of page 'Download - Odin Flashable Tar:').
Which you chose depends on which you had before the issue and whether you want to restore a previous backup once recovery is restored. If you are not going to be restoring a back up, I'd recommend the TWRP file as it can be flashed with Odin.
Your other option is to Flash a stock firmware from Odin and start from scratch. This can be the more labor intensive way because you then need to setup the phone again and get it back to how you like it. The benefit of this method is that it wipes absolutely everything, including whatever problem had you screwed in the first place. Because I tinker with my phone a lot, I always have everything important stored on an external SD. Pictures, Titanium Backup, Nandroid, etc. If you have backups of everything you need off the phone, I'd recommend that you Odin it. If you do not have things backed up try installing recovery first and getting the phone to boot. In the end if you do chose this method you should still wipe as there was obviously something that really buggered your phone and a wipe will be the best way to fix that so it doesn't recur. That's my opinion anyway.
Update!
Apparently I can access Recovery Mode now!! However, it still does not boot up. I backed up all my filed to my external 8GB SD card, and then wiped the dalvik Cache. Nothing. I did a full Factory reset and still nothing. AM I missing a step? Is there a step I should take before or after clicking full wipe? The phone boots all the way to cyanogen mod logo, where an arrow spins around it. However, that's all it does.
Any ideas?
ABCordova said:
Apparently I can access Recovery Mode now!! However, it still does not boot up. I backed up all my filed to my external 8GB SD card, and then wiped the dalvik Cache. Nothing. I did a full Factory reset and still nothing. AM I missing a step? Is there a step I should take before or after clicking full wipe? The phone boots all the way to cyanogen mod logo, where an arrow spins around it. However, that's all it does.
Any ideas?
Click to expand...
Click to collapse
So you can access recovery mode?
*Before you follow the next steps, understand everything will be deleted from your PHONE, NOT sdcard.*
You have to wipe everything clean. That means(in recovery mode):
Wipe Data/factory reset
Wipe cache partition
Wipe dalvik cache
Then you would install your rom. From there everything should work. Also, are you installing CM10.2? 10.1? 11? (I personally suggest 10.2.)