Hi, i have just got a new xda orbit and noticed that when the backlight goes off after a set period (30 secs), it seems to be still lit but only very slighty, so at night you still see the today screen etc. But if i press the power button then the display goes off. Is this correct ?
The reason im asking as i have been using an xda mini s for over a year and when the backlight times out the display is not visible at all in the dark. You have to press the power button to see the screen again.
Hope this makes sense
Yes, that is fine. The dim backlight will go out in time too.
MaskedMarauder is 100% right. It will go out eventually.
Ok thanks guys for the quick reply, just obsevered it last night and noticed it was different.
Thanks again...
I've tried posting about this before, but it never gets answered - i've got a mda III, and that dims to brightness 1 (from within the registry), but will never go out - regardless of what rom i've tried.
I've also noticed that i can force set it to 0 in the registry, but thats the overall screen brightness. None of the other reg keys (putting bkl1:, etc in the various power keys) seem to work.
Any one got any ideas or utils to sort this? I'd try to code this as there are some code samples which allow you to force this, but i've not got VS
Like you i've tried all the registry edits i can think off to no avail. I too have a wizard and find this irritating - plus backllight stays on when media player on etc.. No difference with wm6 so i guess it maybe a hardware issue. I use a small app to turn off display when apps are running and i want the display off.
I use backlight time of 30 secs and power of 1 minute - so overall similar to my wizards backlight time of 1 minute.
why not..
why not just pres the I/O button on the side to turn off the backlight when u don't want it on? obviosuly a bit of a hassle, but if u get into the habit of doing it, no problems
Because that puts the device into standby and turns everything else off too (except the phone etc.) So if your listening to music your plunged into silence.
I had an XDA2i (Alpine) previous to my Orbit and I actually prefer the dimmed screen.
A brief press on the 1/0 power button WILL make the device go into standby.... BUT...
press and HOLD the power button for LONGER than 2-3 seconds and it toggles the backlight on and off, whilst STILL keeping the device on!
hope this helps
Joe
Everytime I boot my phone up, it works fine up until when the screen goes into sleep mode. Once it goes into sleep mode I cannot turn the screen back on, it stays black. The keyboard, end and answer key lights show up when I press the power button but the screen just stays black no matter what button I press.
I end up having to either take the battery out or using the stick to press the reset button on the side in order to get the phone to where I can see the screen again. I have adjusted the settings to where the screen doesnt go into sleep mode and the screen just stays on but that drains my battery. I want to be able to have my screen go off so I can save power but if it goes off it wont come on again until I reboot.
I have done a hard reset. This problem started happening to me when I started using the Energy Rom but I've even flashed different Roms and the problem still exist.
Somebody please tell me what's wrong! I need help! This is a big annoying problem to have. Thanks.
is this problem occurring when you slide the keyboard out?
i had the t-mobile touch pro2 with this problem.
the screen would die when the keyboard was out and not come back.
if this is the case, what i did was...
well. obviously not open the keyboard fully.
but if i accidentally had.
instead of pulling out the battery, i waited...
till the screen 'naturally' went to sleep.
than i would pull out the stylus or press power button
and the screen would come on.
sh4d0w86.
sh4d0w86 said:
is this problem occurring when you slide the keyboard out?
i had the t-mobile touch pro2 with this problem.
the screen would die when the keyboard was out and not come back.
if this is the case, what i did was...
well. obviously not open the keyboard fully.
but if i accidentally had.
instead of pulling out the battery, i waited...
till the screen 'naturally' went to sleep.
than i would pull out the stylus or press power button
and the screen would come on.
sh4d0w86.
Click to expand...
Click to collapse
Yes the problem still exist even when I slide the keyboard out. Once the screen goes off, that's it....pressing the power button to get it out of sleep mode, sliding the keyboard, I press all buttons and nothing works. The only thing that "works" to get the screen back on is removing the battery or using the stylus to press the reset button.
When sliding the keyboard out the keys light up but the screen doesn't come on, also pressing the power button lights up the end and answer keys without the screen coming on.
themasterhook2000 said:
Yes the problem still exist even when I slide the keyboard out. Once the screen goes off, that's it....pressing the power button to get it out of sleep mode, sliding the keyboard, I press all buttons and nothing works. The only thing that "works" to get the screen back on is removing the battery or using the stylus to press the reset button.
When sliding the keyboard out the keys light up but the screen doesn't come on, also pressing the power button lights up the end and answer keys without the screen coming on.
Click to expand...
Click to collapse
so. whenever the screen goes out, period, you cant get it back?
or the screen goes out and cant get it back once you slide the keyboard out?
if it is only when sliding out the keyboard...
try not opening the keyboard fully on the right side.
on my rhodium, after that point, the screen goes out.
sh4d0w86.
sh4d0w86 said:
so. whenever the screen goes out, period, you cant get it back?
or the screen goes out and cant get it back once you slide the keyboard out?
if it is only when sliding out the keyboard...
try not opening the keyboard fully on the right side.
on my rhodium, after that point, the screen goes out.
sh4d0w86.
Click to expand...
Click to collapse
Yes, period. Also, you know when you put your face to the phone during a call and the screen goes off so your face wont press anything on the screen? It doesn't come back on from that either once I end the phone call, it just stays black. I'm assuming you don't have any other suggestions. This Sucks
themasterhook2000 said:
Yes, period. Also, you know when you put your face to the phone during a call and the screen goes off so your face wont press anything on the screen? It doesn't come back on from that either once I end the phone call, it just stays black. I'm assuming you don't have any other suggestions. This Sucks
Click to expand...
Click to collapse
: / sorry. i am unsure.
maybe you have a lose connection?
sh4d0w86.
This has to be a software issue but I don't know where to start. I'm surprised nobody else has encountered this problem. I've grown frustrated of this issue because I don't understand why it's doing this. I have had the phone for almost 6 months only dropping it once 4 months ago and it wasn't a strong damaging drop that would affect anything inside. I guess I'll just have to go last resort and call warranty to swap the phone out. Thanks for the help.
Same problem
themasterhook2000 said:
This has to be a software issue but I don't know where to start. I'm surprised nobody else has encountered this problem. I've grown frustrated of this issue because I don't understand why it's doing this. I have had the phone for almost 6 months only dropping it once 4 months ago and it wasn't a strong damaging drop that would affect anything inside. I guess I'll just have to go last resort and call warranty to swap the phone out. Thanks for the help.
Click to expand...
Click to collapse
My phone also dos not come back on, when I put it in out the sreen with the power button on top, or when the phone goes to sleep. Nothing can put it back on(opening te keyboard, pulling out the stylis, presing the answer-, windows-, back- and end button). I and up using a music players too keep the phone busy what's makes it operational. Cant really remember when this started happening exactly. My phone is at the moment loaded with a standard ROM. I used too have a custom ROM.
My TP2 does this too, although I only encounter the problem sometimes when someone calls. I answer and put the phone next to my ear, the screen goes black as it should and the phone just dies. I can't hear what the other person is saying and the screen wont turn on anymore. I have to take out the battery to reboot.
set light sensor to manual in settings. You have some bad or fragmented code causing the problem. Pretty common actually, many different reasons, but usually either a bad light or proximity sensor or software issue. Setting the sensor to manual should do it, if not, hard reset and allow the phone to fully set up before touching it, to allow full customization process to complete. Search my posts on SOD (sleep of death) for more information.
Funny this was brought up. Now im worried I just dropped 250.00 and have a new one coming.
Mine started with the ear piece quit working. couldnt hear anything except on speaker.
Anyway I started having the screen issue over a month ago, only way to get it back was soft reset with the stylus. Also when the screen was lit, I couldn't hit the power button to turn the screen off. At times the screen would be on 24/7 and I just dealt with it. The times when it decieded to go to sleep was when I needed the soft reset. Well long story short I forgot my charger one day at work and the battery died. after pressing the power button for hours with no response, moving the screen in all diffrent directions as I pressed the button.It came on once after hrs of messing with it. Well today it died again and I am fed up with it so out came the tools. Once I opened it up I noticed the ribbon that feeds the screen from the mother board was worn and torn. the ribbon slides everytime the keyboard is slid out and it rubs on both sides of the phone. I thought maybe mine was just a fluke and was installed wrong considering the phone being 10 months old but now I read this and see maybe its a common problem. The cheapest I could find the Ribbon was 56.00 so I didnt want to chance it not being the issue.
Hi Folks
I got a samsung s4 mini and set the screen time out of 15 seconds but when it dims out it comes back on again, the same happens when I press the power button on the side. I have have turned the smart stay button off and motion sensor button but still no joy, it is really annoying can anyone help.
Cheers
My son's tab 3 screen will not awake and has to be reset to come back on. The screen comes back on fine when reset but if it left for a while it wont awake and I can hear the water sound the tab makes when trying to open the screen but it does not come on, has anyone any idea what could be the problem.
I have that occasionally too. What works for me is, press the power button after you hear the water sparkle sound, then press the home button again, and you should see the screen come back to life. Sometimes it takes two or three tries. HTH.
Hi folks!
I've got a very weird issue with my P-600!
Yesterday, I noticed a dark area in the left corner on the bottom of the screen.
At first, I thought a LED line was dead on the backlight panel. No surprises, it's a 10 years old device...
To confirm that, I rebooted the device expecting to get the same issue (dark corner anyway, anytime) but it became even more "bizarre": after getting into system again, the dark spot was gone but the device was unable to revive the screen after going into sleep mode.
No matter if the screen was put into sleep by inactivity time-out or by pressing the power button, when the screen became black, it stayed black.
But with apps still running in background: for exemple Spotify was still playing music.
The only way to get the screen on back again, was to force a reboot by keeping the power button pressed down.
After reading many posts here and on other sites, I found some talking about the "Android Black Screen Of Death" and some tutorials on how to fix it on Samsung devices. So I opened my Tab, unlocked all flat cables, waited 10 minutes or so and then reconnected everything.
Well, it did it but only partially: now I'm a in quite "mixed" and unexplainable situation.
The screen works again, I can put my Tab to sleep and get it on again just pushing the power buton.
BUT...
The dark area in the left corner comes back again, only after sleep mode!
If I reboot the device, the screen is perfectly enlighted in all its surface, but it will get again that dark spot in the corner after screen sleep. What the heck... ?
So it's not clear for me how to definitely fix it.
Should I replace the entire screen? The flat cables? The battery?
Any help to understand what's going on will be greatly appreciated!