Related
First a little background. I am not new to the android world whatsoever. I don't post much but have been lurking for years. I had a Verizon GS3 and just recently switched to T-Mobile a few days ago and obviously bought a T-Mobile GS3. My vzw phone had no problems. But for some reason my T-Mobile phone will not boot any kernel I try to flash. Roms flash fine but when I flash a kernel everything goes fine in recovery but my phone won't boot past the splash and I end up having to restore a backup. I know I'm flashing the right kernels. I am on touchwiz based ROMs and haven't tried any aosp Rom because for the first time ever I actually prefer an OEM skin to aosp. So basically am I missing something obvious. Anyone else having thus problem. On Verizon I had to root and unlock the bootlosder. From what I understand tmobiles bootliader was not locked down and all I had to do was root. Like I said. I've tried every touch wiz Rom and every touch wiz kernel with each Rom and none will boot past the splash screen. I always wipe dalvik and cache but even tried wiping data every time too and keep getting the same result. Any input would be appreciated. . Thanks in advance.
Sent from my SGH-T999 using xda premium
Shouldn't need to do any wiping of any kind. I only use AOSP/AOKP, though. May I ask why you even bother with custom kernels? They honestly seem like a waste of time to me.
Im just flash happy. Like to try them out. I've been on Verizon for many Years and am used to the developers over there. I'm still getting used to the devs over here. Don't know any of there work. I'm sure its all good though. Been using imoseyons lean kernel since the thunderbolt back in the day and have stuck with them. Just my personal preference. I'd like to try some of tmobolrs kernel devs work but like I said I can't get a single one to boot.
Sent from my SGH-T999 using xda premium
What kernels have you tried to flash? There are a couple that have ICS builds. Also, what version of CWM are you using?
I've tried all the tw kernels. Every single one with 2 different ICS tw ROMs. I'm not using the leaked jb tw. I'm stickung with the more stable ICS ROMs for now. I just don't understand. I've tried every one. I've been flashing a long time and don't get it. Im kinda new to Samsung though. First Samsung was the galaxy nexus. Didn't ever use Odin with it. Does anyone flash kernels with Odin. Maybe I should try that. And to answer your question I've tried twrp and the latest version of cwm from rom manager. And of course I'm using the ICS TW version of the kernels im trying.
Sent from my SGH-T999 using xda premium
It could just be your phone doesn't like them. There is another guy on CM10 and AOKP that can't get custom kernels to boot either.
Sent from my Nexus 7 using Tapatalk 2
The kernel source code was never released for any build from UVALH2 and beyond. So most of our kernels will only work with UVALEM and UVALG1 builds.
We got kind of lucky I think and ktoonsez att kernel was brought over and works. I think there's one or two others that work now too.
As far as described here go I think we've got some of the best! For an outstanding rom you should try FreeGS3. It works with most of the kernels and is an awesome stable rom. If you want a later build try wildcards XquiziT v70 based on UVALH2. Use ktoonsez kernel with it.
And just to note, the stock kernel is surprisingly good. So give it a fair shot as well. Though I can definitely see some potential advantages of custom ones as well.
Sent from my SGH-T999 using xda app-developers app
Thanks for all the info. But now I can't even get any other ROMs to boot. I don't get it. I keep having to restore my Xquizit v20 back up. Its driving me nuts
Sent from my SGH-T999 using xda premium
jasonpantuliano said:
Thanks for all the info. But now I can't even get any other ROMs to boot. I don't get it. I keep having to restore my Xquizit v20 back up. Its driving me nuts
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Have you done full Wiping?
Wipe Data/Factory Settings
Wipe cache and dalvik
Flash Rom
Fix Permission
Reboot and don't touch it for 10 minutes
Reboot.
Wipe cache and dalvik
Flash Kernel (Must be compatible with ROM)
Fix Permission
Reboot and don't touch it for 10 minutes
Reboot.
See if this will work. Sometimes you have to let it breathe so it can adjust itself.
Have you tried uding odin to flash MrRobinsons root66 UVALH2? This will take you to fresh full stock plus root. Then try roms again.
Sent from my SGH-T999 using xda app-developers app
Whatever you do................
Be sure to double check before you flash that kernel. Had my first SGS3 for 12 days before hard brick set in. Terrible disease it is.......! I had to adopt a replacement shortly after to cope with the pain of the loss. Back on my feet again now though and soarin' higher than giraffe vagina on the things I learned in my days off for mourning. I can tell ya I've personally flashed the lean kernel and kt-747 with no issues. My problems were with siya mainly.
Guys, I have a serious problem.
It's similar to the one of the thread-opener.
The diference is that I cant get ANY ROM to boot, WITH the stock kernel.
And i do like the guide says: wipe/factory reset, wipe chache, wipe dalvik cache and then flash the ROM.
Everything works fine til the ROM finished flasing and runs a reboot.
My S3 shuts down screen, then turns screen on with the "Samsung Galaxy SIII-GT-I9300" and then thats it!
All i can do is to go in download mode or recovery mode. I can also flash CWM and so on, but after flashing ROMs it won't boot!
Is it possible that i broke the device by formating internal sd-card with the stock recovery tool?
Did it, after I tried to install Wickedv6 ROM and after both times when it rebooted it just reinstalled stock ROM. So i thought, ok delete the internal sd-card, so no stock ROM on it any more.
Also tried this ROM: http://forum.xda-developers.com/showthread.php?t=1875923
Same problem.
Also tried to fix the problem by rooting and then flashing ROM. No help.
Please help guys!
Best regards
ke-ironman said:
Guys, I have a serious problem.
It's similar to the one of the thread-opener.
The diference is that I cant get ANY ROM to boot, WITH the stock kernel.
And i do like the guide says: wipe/factory reset, wipe chache, wipe dalvik cache and then flash the ROM.
Everything works fine til the ROM finished flasing and runs a reboot.
My S3 shuts down screen, then turns screen on with the "Samsung Galaxy SIII-GT-I9300" and then thats it!
All i can do is to go in download mode or recovery mode. I can also flash CWM and so on, but after flashing ROMs it won't boot!
Is it possible that i broke the device by formating internal sd-card with the stock recovery tool?
Did it, after I tried to install Wickedv6 ROM and after both times when it rebooted it just reinstalled stock ROM. So i thought, ok delete the internal sd-card, so no stock ROM on it any more.
Also tried this ROM: http://forum.xda-developers.com/showthread.php?t=1875923
Same problem.
Also tried to fix the problem by rooting and then flashing ROM. No help.
Please help guys!
Best regards
Click to expand...
Click to collapse
This isn't the I9300 forum, but if you flashed a T999 rom, you bricked your phone.
Aerowinder said:
This isn't the I9300 forum, but if you flashed a T999 rom, you bricked your phone.
Click to expand...
Click to collapse
Wow, you scared the **** out of me
But i just tried to flash stock ROM: http://forum.xda-developers.com/showthread.php?t=1646610
It worked out!
What is the right forum for my GT-I9300 to post then?
And why isn't any other ROM working?
The forum you got that stock rom from is the international one. This is the US Tmobile T999 forum. The two phones are NOT compatible.
Only flash, well...anything, from that forum. Our roms will brick yours and vice versa.
Sent from my SGH-T999 using xda app-developers app
Hi there!
I have had an s3 for a few days now and love it!.
Any TW rom and my camera works just fantastic.
Any cm10/aokp/miui/etc rom and I just cant use the camera no matter what app I use to try it, whether it be the built in app or camera360/etc.
Driving me nuts and would love someone to help me. Anyway research I have done hasnt told me what I'm doing wrong.
I wipe cache/dalvik/factory reset/system before each rom. I have tried different kernels but nothing has helped.
Any gurus out there have any ideas on what I can do to fix this?
Your install process would be and please link the files you are flashing... I'll try and help you. I've seen a few people mention this the past couple days.
The most recent I tried to flash was Illusion v1.1.18 - (d2tmo, d2att & d2vzw) - 1|18|13 from this thread:
http://forum.xda-developers.com/showthread.php?t=2037028
I downloaded Illusion-v1.1.18-d2tmo.zip and gapps-jb-20121212-signed.zip.
I went into recovery which is twrp and the most recent version. I installed it with the goo.im app.
When in recovery I did:
1) Factory Wipe
2) Wipe Cache
3) Wipe Dalvik
4) Wipe System
I would then click Install and select the rom file, and after it succesfully flashed I would then flash the gapps file. All were successful.
I would then reboot and the rom would boot up fine. I setup my google account and all that then for the heck of it I would reboot.
I then would try the camera app and it would complain that it couldnt connect to the camera basically. I went into the play store and tried a free version of camera 360, puddle camera, etc and all would not work.
I went back into recovery, wiped cache and dalvik again, hopped on one foot, faced east, and clicked my heels together. Upon reboot the camera does not work.
I have wiped all that and tried to install [Kernel][JB] Leankernel: Minimalistic Kernel for D2TMO/D2ATT (AOSP) v2.3 [1/17/13] which flashed fine. Upon reboot I could change voltages to undervolt, mess with governors but cameras still do not work.
I have a backup of two TW roms (one stock) and both of the those roms work beautifully with whatever camera I try, including the built in/stock camera.
I hoped I didn't leave out something. If there is something I missed than I'm an idiot because it seems like I am really missing something.
Thanks for your help.
I don't see any reason your steps lead to that, the exact steps I take every time to flash. I'm researching but in the mean time, go to app manager and wipe cache and data from gallery... Are you using the same Gapps over and over on each try? Might wanna try a different set.
mt3g said:
I don't see any reason your steps lead to that, the exact steps I take every time to flash. I'm researching but in the mean time, go to app manager and wipe cache and data from gallery.
Click to expand...
Click to collapse
I did that earlier with no luck.
I just force stopped on gallery, wiped cache/data, rebooted, and I tried the camera only to get the same message.
Thank you for that tip but I will continue my research also.
Just because I looked at about phone.
Model of phone is SGH-T999 (just in case someone thinks I'm in the wrong forum"
Baseband version is T999UVDLJA
Kernel is of course 3.0.59-leanKernel
AOKP Version is Illusion v1.1.18 d2tmo
Build number is aokp-d2tmo-userdebug 4.2.1 (I truncated the rest)
mt3g said:
Are you using the same Gapps over and over on each try? Might wanna try a different set.
Click to expand...
Click to collapse
I have downloaded this gapps twice for the last rom http://goo.im/devs/itsmikeramsay/gapps-jb-20121212-signed.zip.
For the miui rom there was a gapps that was specific to miui and had miui in the name. The miui rom's camera didnt work.
I'll look for a different gapps if that might be the problem but since I have tried a couple roms and a few different gapps I feel that might not be the issue.
I still will give it another try though. Just have to find another gapps to try.
try these just in case they're corrupted. http://d-h.st/dtk these are the ones I use
mt3g said:
try these just in case they're corrupted. http://d-h.st/dtk these are the ones I use
Click to expand...
Click to collapse
I redid the entire install process from scratch using that gapps and the camera is still not working.
Ugh. Thanks for the link.
WIll keep trying :/
run a log cat and post it. Other then that maybe bad firmware...
did you update your phone to stock JellyBean via Over the Air or Odin? it updates the partitions which could be the issue, mmayyybbeee???!?!? Shots in the dark right now, just trying to help as I've never seen this issue before solved.
mt3g said:
run a log cat and post it. Other then that maybe bad firmware...
did you update your phone to stock JellyBean via Over the Air or Odin? it updates the partitions which could be the issue, mmayyybbeee???!?!?
Click to expand...
Click to collapse
It had JB on it when I got it almost 2 days ago. I tried to do an OTA when I got it but it said I was up to date.
Let me do a restore to stock and see what version it is.
Edit: Restored stock. Says android version 4.1.1, Kernel 3.0.31-370274se.infra, Build number JR003L.T999UVDLJA
Was it already rooted?
Sent from my SGH-T999 using xda premium
mt3g said:
Was it already rooted?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
It was new, out of the box. I watched the guy unrap it. It is one of the newer grey metal color looking ones. It was not rooted. I did that. Should I do an Odin to bring the device back to complete stock and start from scratch?
Will take a while since I have no idea where to start with all that
Thats the best suggestion I have. Maybe someone else will step in with an idea.
Sent from my SGH-T999 using xda premium
mt3g said:
Thats the best suggestion I have. Maybe someone else will step in with an idea.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
You have been helpful. In a bit ill reflash a cm/aokp rom and logcat it.
This is happening a couple of threads above you haha http://forum.xda-developers.com/showthread.php?p=36899130
Sent from my SGH-T999 using xda premium
mt3g said:
This is happening a couple of threads above you haha http://forum.xda-developers.com/showthread.php?p=36899130
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Hey thanks again for your help. I ended up falling asleep but installed Wicked V6 (tw based rom) and liking it enough that I will wait on a aokp/cm10.x rom until I get up the motivation to try again.
I'm sure I'll get an itch for a different rom in about a week though
dccoh said:
Hey thanks again for your help. I ended up falling asleep but installed Wicked V6 (tw based rom) and liking it enough that I will wait on a aokp/cm10.x rom until I get up the motivation to try again.
I'm sure I'll get an itch for a different rom in about a week though
Click to expand...
Click to collapse
All good, just hope the thread I pointed to will work out once you do want to give it another go.
Sent from my SGH-T999 using xda premium
mt3g said:
All good, just hope the thread I pointed to will work out once you do want to give it another go.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I backed up Wicked and loaded up my original rom that I wanted to try.
The fix in the said thread fixed me right up, camera works fine.
All this trouble because of one 350ish kb file
Thanks for checking on my issue.
dccoh said:
I backed up Wicked and loaded up my original rom that I wanted to try.
The fix in the said thread fixed me right up, camera works fine.
All this trouble because of one 350ish kb file
Thanks for checking on my issue.
Click to expand...
Click to collapse
Most definitely sir. I don't understand why that file was getting screwed over. Glad it all got worked out for you.
Sent from my SGH-T999 using xda premium
I was wondering how in the hell do i get updated to all the new updates and such.
Currently i'm rooted with Twrp 2.3.1.0, i used the toolkit back some time ago and game me the option to basically install custom roms and such but never did anything except for a kernel.
So my question is Im still on LJC, 4.1.1, and i'm sick of the pop ups for the install update, and i know its going to fail so i'd figure can i just install a custom rom and it will take care of all that crap like for instance just go ahead and start fresh and install CyanogenMod?
XxLostSoulxX said:
I was wondering how in the hell do i get updated to all the new updates and such.
Currently i'm rooted with Twrp 2.3.1.0, i used the toolkit back some time ago and game me the option to basically install custom roms and such but never did anything except for a kernel.
So my question is Im still on LJC, 4.1.1, and i'm sick of the pop ups for the install update, and i know its going to fail so i'd figure can i just install a custom rom and it will take care of all that crap like for instance just go ahead and start fresh and install CyanogenMod?
Click to expand...
Click to collapse
That could be an option if you're looking to move over to AOSP but if you wanted to stick with TW you could always just flash a ROM based off stock 4.1.2, MA7 or MC2.
Sent from my Nexus 4 using xda premium
LuigiBull23 said:
That could be an option if you're looking to move over to AOSP but if you wanted to stick with TW you could always just flash a ROM based off stock 4.1.2, MA7 or MC2.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Well i tried to install CM 10 getting stuck at bootani its seriously pissing me off. i wiped everything and followed directions and nothing is working
XxLostSoulxX said:
Well i tried to install CM 10 getting stuck at bootani its seriously pissing me off. i wiped everything and followed directions and nothing is working
Click to expand...
Click to collapse
Will need more info, like your exact installation process to help you any further.
Sent from my SGH-T999 using xda premium
LuigiBull23 said:
Will need more info, like your exact installation process to help you any further.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Okay Well i wiped(factory reset under TWRP 2.5) then did advanced wipe and chose system option; then wiped. Then i had flashed CM10 then after flashed GApps, rebooted and bam into bootloop, and as i typing this i 'm doing the avatar rom and same thing bootloop. also i should mention it skips the md5 check and says there is no md5 file.
Just tried rootbox same thing gets as far as the boot ani then bam sits there
XxLostSoulxX said:
Okay Well i wiped(factory reset under TWRP 2.5) then did advanced wipe and chose system option; then wiped. Then i had flashed CM10 then after flashed GApps, rebooted and bam into bootloop, and as i typing this i 'm doing the avatar rom and same thing bootloop. also i should mention it skips the md5 check and says there is no md5 file.
Click to expand...
Click to collapse
When you say CM 10 I'm assuming you're referring to CM 10.1? If so make sure your using the correct gapps and if you still face issues I suggest redownloading the ROM and gapps through Goomanager, make sure the MD5 match up, and then fully wipe and flash again. Keep me updated.
Sent from my Nexus 4 using xda premium
LuigiBull23 said:
When you say CM 10 I'm assuming you're referring to CM 10.1? If so make sure your using the correct gapps and if you still face issues I suggest redownloading the ROM and gapps through Goomanager, make sure the MD5 match up, and then fully wipe and flash again. Keep me updated.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Yess 10.1, and yes i did exactly as it says im uploading a youtube video for you to watch so you can see what im doing exactly.
Just followed Rootbox instructions as i just literally tried that rom out, and same results. i cant match the md5 as it skips it during install process as it says there is no md5 file
XxLostSoulxX said:
Click to expand...
Click to collapse
Thanks. I'll watch it and get back to you asap.
Sent from my Nexus 4 using xda premium
---------- Post added at 02:36 AM ---------- Previous post was at 02:06 AM ----------
XxLostSoulxX said:
Yess 10.1, and yes i did exactly as it says im uploading a youtube video for you to watch so you can see what im doing exactly.
Just followed Rootbox instructions as i just literally tried that rom out, and same results. i cant match the md5 as it skips it during install process as it says there is no md5 file
Click to expand...
Click to collapse
Ok I see what you're doing. My brother had a similar problem and there seems to be something wrong with the kernel script not running through properly and to fix this you will need to perform a factory reset as the OP instructs BUT I would try it twice. Once before the flash and another after the flash. Try it and if that doesn't work try the same steps with a 3rd party kernel. Flashing a kernel after the ROM is not recommended but if it helps to boot up the phone then you'll know it was the stock kernel. Let me know
Sent from my Nexus 4 using xda premium
LuigiBull23 said:
Thanks. I'll watch it and get back to you asap.
Sent from my Nexus 4 using xda premium
---------- Post added at 02:36 AM ---------- Previous post was at 02:06 AM ----------
Ok I see what you're doing. My brother had a similar problem and there seems to be something wrong with the kernel script not running through properly and to fix this you will need to perform a factory reset as the OP instructs BUT I would try it twice. Once before the flash and another after the flash. Try it and if that doesn't work try the same steps with a 3rd party kernel. Flashing a kernel after the ROM is not recommended but if it helps to boot up the phone then you'll know it was the stock kernel. Let me know
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
tried with 3rd party kernel i.e matrix kernel and nope still not working WTF.
XxLostSoulxX said:
tried with 3rd party kernel i.e matrix kernel and nope still not working WTF.
Click to expand...
Click to collapse
No AOSP ROMs at all? I would go back to complete stock, update to MA7 or MC2 then reroot and try flashing again.
Sent from my Nexus 4 using xda premium
XxLostSoulxX said:
Okay Well i wiped(factory reset under TWRP 2.5) then did advanced wipe and chose system option; then wiped. Then i had flashed CM10 then after flashed GApps, rebooted and bam into bootloop, and as i typing this i 'm doing the avatar rom and same thing bootloop. also i should mention it skips the md5 check and says there is no md5 file.
Just tried rootbox same thing gets as far as the boot ani then bam sits there
Click to expand...
Click to collapse
Wipe 3X. Data, System, cache, Dalvik.
Anything less and you're bound to get problems.
Skripka said:
Wipe 3X. Data, System, cache, Dalvik.
Anything less and you're bound to get problems.
Click to expand...
Click to collapse
i did; wiped data 3x, system 3x, cach and dalvik 3x, installed cm 10.1 then right after Gapps but again says skip md5 check there is no md5 file and bootloops on CM 10 boot animation
XxLostSoulxX said:
i did; wiped data 3x, system 3x, cach and dalvik 3x, installed cm 10.1 then right after Gapps but again says skip md5 check there is no md5 file and bootloops on CM 10 boot animation
Click to expand...
Click to collapse
Does it bootloop...or have you just been impatient? 1st boots of a new ROM can take a while.
Presuming it is stuck at boot splash...either an unstable build, or a corrupt download are possible. Verify the MD5 of your downloads.
Skripka said:
Does it bootloop...or have you just been impatient? 1st boots of a new ROM can take a while.
Presuming it is stuck at boot splash...either an unstable build, or a corrupt download are possible. Verify the MD5 of your downloads.
Click to expand...
Click to collapse
did you watch my video? it was sitting for 5 minutes,on the cyanogenmod boot animation.
i just restored and back on ljc perfectly fine. but i guess my phone does not like flashing as i said and in the video it hangs and skips the md5 check
okay i used Toolkit 4.1.0 and chose to flash to stock and it didnt work because i still have root and still on ljc, and same setup as before, i cant update to ma7, however i chose to install stock recovery, but i know if i do update it will fail.
EDIT: **** it wont even reboot to install the update. says rebooting now and nothing. F THIS PHONE.
I CANT EVEN UNROOT
XxLostSoulxX said:
did you watch my video? it was sitting for 5 minutes,on the cyanogenmod boot animation.
i just restored and back on ljc perfectly fine. but i guess my phone does not like flashing as i said and in the video it hangs and skips the md5 check
Click to expand...
Click to collapse
Every device handles things differently, including first boot up times. It can take anywhere from 5-10min. So don't worry about how short Josh's boot up time was in his video. I highly suggest you:
1) Wipe system, data, cache/dalvik 3x
2) flash ROM and Gapps
3) Go back and perform a "factory reset" 3x
4) Reboot
5) Let phone sit at most 15min.
Just do this one final time exactly as instructed and assuming you've tried earlier nighties, if it doesn't boot up by 15 min then you'll know it's the phone and NOT you.
Sent from my Nexus 4 using xda premium
LuigiBull23 said:
Every device handles things differently, including first boot up times. It can take anywhere from 5-10min. So don't worry about how short Josh's boot up time was in his video. I highly suggest you:
1) Wipe system, data, cache/dalvik 3x
2) flash ROM and Gapps
3) Go back and perform a "factory reset" 3x
4) Reboot
5) Let phone sit at most 15min.
Just do this one final time exactly as instructed and assuming you've tried earlier nighties, if it doesn't boot up by 15 min then you'll know it's the phone and NOT you.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
what do i do if its the phone? i cant even unroot, i cant even flash to stock WTF! tried using toolkit but nothing. only thing i accomplished was being able to install stock recovery, and went back into android and chose to reboot to install update from OTA wont even reboot when it says rebooting now.
XxLostSoulxX said:
what do i do if its the phone? i cant even unroot, i cant even flash to stock WTF! tried using toolkit but nothing. only thing i accomplished was being able to install stock recovery, and went back into android and chose to reboot to install update from OTA wont even reboot when it says rebooting now.
Click to expand...
Click to collapse
Ok... Do you still have that LJC nandroid backup?
Sent from my Nexus 4 using xda premium
LuigiBull23 said:
Ok... Do you still have that LJC nandroid backup?
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
correct yeah because i restored so i can atleast use my phone to try to fix it using toolkit
EDIT: Hooray i finally got it that did the trick this time. however basband is still LJC but is 4.2.2 because i went through setup this time and was able to boot up
I finally decided to root and install a custom rom today
I have Samsung Galaxy Note 2, SGH-i317M
The root went fine, but when I flashed in Carbon, it wouldn't let me look at any of the apps and just said "Unfortunately, launcher has stopped."
I waited a bit but this didn't go away. So I decided to reboot and see if it would fix it. It didn't and the next time something else stopped working and I couldn't get back to the homescreen, and the home button did not work. I tried going into recovery and using my backup, but it said there were no files found, I think they got deleted when I wiped the cache by mistake instead of the davlik cache
So now I wanna go back to stock. Right now i'm downloading the stock firmware, should I just use ODIN with this and it'll fix it? Do I need to do anything different in ODIN or is it the same as when I was rooting it?
Which recovery are you using? Did you factory reset, wipe partition cache and wipe dalvik cache?
Sent from my SGH-I317 using xda app-developers app
hey dont get discourage
orzdesu said:
I finally decided to root and install a custom rom today
I have Samsung Galaxy Note 2, SGH-i317M
The root went fine, but when I flashed in Carbon, it wouldn't let me look at any of the apps and just said "Unfortunately, launcher has stopped."
I waited a bit but this didn't go away. So I decided to reboot and see if it would fix it. It didn't and the next time something else stopped working and I couldn't get back to the homescreen, and the home button did not work. I tried going into recovery and using my backup, but it said there were no files found, I think they got deleted when I wiped the cache by mistake instead of the davlik cache
So now I wanna go back to stock. Right now i'm downloading the stock firmware, should I just use ODIN with this and it'll fix it? Do I need to do anything different in ODIN or is it the same as when I was rooting it?
Click to expand...
Click to collapse
really should read before posting because a lot of people had the same problems. but dont be discourage because as long as you can get twrp then you are good to go. trust me i am not a developer just a flashahaulic once you get to using custom roms you will understand how great it really is.
alot of times the first time you flash little things might hiccup you panic or reset to soon just turn your phone off then press the volume up, home button and the power hold till the recovery comes up then. now if your did a back up before you started then you can just restore and it will fix the problem. now if you didnt do that trust me i have done it plenty of times before till i relised how important it was to do. just go and down load another rom ( like jedi x} real stable. wipe every thing twice and wipe rom. install new rom and wait it might take a while but wait then you should be good
Thank you everyone, I managed to get my stock back and i'll try to flash a different ROM this time. The issue with Carbon is that I needed GAPPS or some random thing, it didn't even say on the front thread and they don't even have a guide, so it's super newbie unfriendly. I should have realized that before I did anything.
Good deal in most cases if not all you'll need gapps when flashing any cyanogenmod based ROM. Good luck my friend!
Sent from my SGH-I317 using xda app-developers app
Okay, now I got GAPPS and flashed in Beanstalk rom.
This time, the Android Keyboard (AOSP) is constantly crashing every 5 seconds. I can't even get into Google Play to download another keyboard. What is wrong here? I searched all over and no one else is having this problem.
Which version of gapps do you have? Be sure you've downloaded version 20130301.
Sent from my SGH-I317 using xda app-developers app
sounds like you need to do ALOT more reading, and ALOT less flashing, until you know what you are doing..
Alright, im not completely new to rooting but I have encountered a new problem.
I rooted my phone through odin (galaxy s3 T999), had some hiccups with that so I ended up downloading the stock rom tar and reflashed using that, problem solved good to go still rooted. awesome.
So, I attempted to flash the cyanogen rom using clockwork mod. it wouldn't come past the load screen, went into clockwork mod to recover my backup but for some reason it wouldn't let me access the SD card to get it. next thought was to go back to odin and flash the same file I used previously to get back to where I was, for some reason this is not working, I can get to download, use odin to flash it, says success and all that, then upoon rebooting it stays at the Samsung loading screen.
So from there I went and downloaded the GS3 toolkit and tried all of their recovery files, all having the same issue. about 18 flashes later I tried reformatting from the phone itself, same issue with the samsung logo being stuck. And now, I am currently baffled, anyone wanna help me out? I have a feeling it has something to do with the .pit option on odin, but I am not that advanced and its just a hunch. so...thanks in advance guys!
So I understand not to touch pit, roger, reading other posts makes that clear, but still cant find a fix, the top right of my download says
ODIN MODE
Product Name SGH-T999
Custom Binary yes: 19 counts
Current Binary Samsung Offical
System Status Custom
Qualcomm secureboot Enable
Okay, what is the current state of the device?
Whst do you see when you boot into recovery ( take battery out of phone the put it back in and do the following: hold volume up, home button and power button, let go of all buttons when you feel the phone vibrate and blue text flashes in the upper left corner of the screen)?
Sent from my SGH-T999 using XDA Premium 4 mobile app
I just tried to send a rom over that had CWM 6.0.2.3 and it installed that, but still stuck on logo. going into recovery I am in CWM 6.0.2.3
have the standard options wipe/factory, install from zip etc.
You flashed a rom that had cwm 6.0.2.3 or did you flash a rom while on 6.0.2.3?
Sent from my SGH-T999 using XDA Premium 4 mobile app
I'd say about 98% of the time, when it hangs like that you just need to factory reset.
Sent from my SGH-T999L using XDA Premium 4 mobile app
Flashed a rom that had 6.0.2.3. I do not have any roms on my ZIP, been doing everything through ODIN. Very confused as to why it suddenly stopped working.
DocHoliday77 said:
I'd say about 98% of the time, when it hangs like that you just need to factory reset.
Sent from my SGH-T999L using XDA Premium 4 mobile app
Click to expand...
Click to collapse
tried to factory reset and it does the same logo stuck business. That was the last thing i tried after attempting to back up and reflash numerous times. tried flashing again recently, it will install CWM if it is attached to the rom but still gets stuck on the logo. tried re installing odin as well, it is working as usual, starts, restarts the phone, sits awhile, success. then i restart the phone and never get past logo.
I would do what Doc said.
If it still doesnt work, download a rom of your choice (in the t-999 section) and do a full wipe before flashing the rom you picked.
Sent from my SGH-T999 using XDA Premium 4 mobile app
Da Kine said:
I would do what Doc said.
If it still doesnt work, download a rom of your choice (in the t-999 section) and do a full wipe before flashing the rom you picked.
Sent from my SGH-T999 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
what do you mean by full wipe, factory reset? or something else?
connorjiy said:
what do you mean by full wipe, factory reset? or something else?
Click to expand...
Click to collapse
When flashing a new rom, you have to do a full wipe or youll run into problems like you are currently having.
If you dont know what a full wipe is, then stop what you are doing and put your phone down. Just about every rom thread here on xda explains what a full wipe is, it will be in the first post of the thread.
Like I said, find a rom you like in the t-999 section and flash it after doing a full wipe.
Sent from my SGH-T999 using XDA Premium 4 mobile app
Da Kine said:
When flashing a new rom, you have to do a full wipe or youll run into problems like you are currently having.
If you dont know what a full wipe is, then stop what you are doing and put your phone down. Just about every rom thread here on xda explains what a full wipe is, it will be in the first post of the thread.
Like I said, find a rom you like in the t-999 section and flash it after doing a full wipe.
Sent from my SGH-T999 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Looked it up, that is what I do by default, didn't know thats what was considered a full wipe, just tried it with similar results, didn't know about the dalvik cache though. im on a work computer so I cannot currently DL a new rom from the site, I hope thats what the issue is, but I still cannot see why my other ones would suddenly not work.
connorjiy said:
tried to factory reset and it does the same logo stuck business. That was the last thing i tried after attempting to back up and reflash numerous times. tried flashing again recently, it will install CWM if it is attached to the rom but still gets stuck on the logo. tried re installing odin as well, it is working as usual, starts, restarts the phone, sits awhile, success. then i restart the phone and never get past logo.
Click to expand...
Click to collapse
I'm just not sure what you mean by it installing CWM attached to a Rom? Recoveries shouldn't be included with a Rom.
Odin flash the root66 firmware, then reboot to STOCK recovery and factory reset. This will wipe all user data, including your internal sd card. Then try rebooting again.
Sent from my SGH-T999L using XDA Premium 4 mobile app