Develop Bugs

Case-mate tough case, not out yet?

On their eu site it shows the case and I like what I see. Looked around and it appears that its coming soon. I was wondering if anyone knew about availability? I have an inquiry in and will report back if it hasn't already been dug up and reported here.
edit... I should have put a link here, my bad. Here is a link to the goods. ---> http://www.case-mate.eu.com/samsung-galaxy-s-2-tough-case-black.html

I don't have any news but thanks for sharing that link. I've been looking to see if Case-Mate was preparing any cases yet for the SG2.

Have you had one previously? I'm running a siedio case right now that I really like. It is a hard rubbery feeling outside that gives some grip but it doesn't collect lint or get stuck in pockets. This is what I'm looking for.

barely there case is out..2 sellers on ebay.uk and amazon uk too..
but i can not find the other hard case

krabman said:
Have you had one previously? I'm running a siedio case right now that I really like. It is a hard rubbery feeling outside that gives some grip but it doesn't collect lint or get stuck in pockets. This is what I'm looking for.
Click to expand...
Click to collapse
Yes I did. I liked it, nice looking, not too thick and had a nice solid feel to it when you grasped the phone. It slide in and out pretty easily and didn't pick up stuff from my pockets.

Thanks
10char

krabman said:
Thanks
10char
Click to expand...
Click to collapse
NP
I'm going to try out the Barely There case for now... I've had those before too. Not nearly as protective but I'd rather try one of these out than some of the odd stuff we are seeing so far.

I ordered some gel cases from Deal Extreme that still haven't shown up yet - a little worried using my SGS II without a case (it's a bit slippery). I like the look of the Case-Mate barely there or Safe Skin - will pick one up in London week after next (I'm sure CPWH will have them...)

Case-mate has responded to my email this morning. They expect to have them available to the public in two weeks.

Hi,
I always use the case-mate tough case on a of my phones, andhave one on pre order from mobile den, cpwh will bedding then for around £25 and the barely there will be much cheaper but to me does not provide grip or good protection.
A5ian300zx
Sent from my iPhone using Tapatalk

I purchased this http://www.case-mate.eu.com/samsung-galaxy-s-2-gelli-case-clear.html and the screen protector that shipped with it is totally the wrong size and has no hole for the home button. it is too short and too narrow almost a galaxy s screen protector with no hole for the home button. I checked 3 different carphone warehouse and they are all the same. I emailed case mate and was told they knew the screen protector didn't fit but just use it anyway.
Really disappointed in the company. No reason at all this should be sold like this. The case is very nice however but at £13 its not cheap if you have no screen protector
Dont know if this will be the same just to let you know

I dont use screen protectors, hate em. Nevertheless I don't like the sound of an outfit shipping a piece that to my mind would be useless and not what was represented. What is your feelings on the fit of the case itself in regards to the cut outs and so on? Overall quality? Value?

This is now available on amazon uk, I have one on the way so I will post up with my impressions after I have it in hand.

Case-mate now available on Clove's website.
Sent from my GT-I9100 using XDA App

mickliq said:
Case-mate now available on Clove's website.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
No its not, they say awaiting first stock...

I have tracking on the amazon stock so at least when I ordered they had some laying about.

Barely there showed in stock
Sent from my GT-I9100 using XDA App

Hi,
carphone warehouse have them in stock - I got mine coming tomorrow or tuesday.
a5ian300zx

a5ian300zx said:
Hi,
carphone warehouse have them in stock - I got mine coming tomorrow or tuesday.
a5ian300zx
Click to expand...
Click to collapse
Do you have a link?

robot1000 said:
Do you have a link?
Click to expand...
Click to collapse
hi,
my Nephew works in carphone warehouse in Birmingham (UK) and has got it for me and posted to me.
a5ian300zx

[REVIEW] Ballistic SG Case (UPDATE)

UPDATE:
I have seen a lot of questions about people seeing this case with out the lip portion which is on the top right of the screen. I just found this case on ebay which is half the price and does not have the lip.
http://www.ebay.com/itm/Black-Xshie...648123?pt=PDA_Accessories&hash=item2a176d08fb
Here is a White version I also found which looks nice.
http://www.ebay.com/itm/Samsung-Gal...707913?pt=PDA_Accessories&hash=item3a6e3eba89
Ballistic SG Case for T-Mobile
I just saw it on eBay and it looks like a great case for protection.
Here is the company's site with the standard S2. They haven't added our phones yet to their site.
http://www.goballisticcase.com/products/samsung-galaxy-s2-ballistic-shell-gel-sg-series-case
Just recieved it today. I like the way it looks but it has a couple of drawbacks.
Pros:
1) Pushing the volume or power button is the best I have seen yet for the T-Mobile GS2 cases. Very fluid just like there isnt a case and the buttons make the natural noise that they make just like not using a case.
2) Seems to be the best protection I have seen for the GS2. I think it will handle a drop very easily.
3) I dont have a screen protector but the way this is designed I dont see how this case would cause any issues like the D30 cases do due to a tight fit. Its somewhat loose and should not cause the corners of a screen protector to lift up.
4) Has a great feel to it and adds some weight to the phone.
5) Protects the back camera perfectly.
6) It does add some thickness to the phone but this is because the phone is extra protected. I would say it is about 1.5x to 1.75x as thick as the phone without a case on it.
Cons:
1) The first layer is rubber and due to this fact it has a few issues.
2) Collects lint easily from your pocket.
3) Can be difficult at times to put in and out of your pocket due to the rubber.
By far though this is the best case I have had for a phone. I own a couple of TPU cases for the T-Mobile GS2 and a D30. It makes the D30 look like junk even though the D30 is a great basic case.It has some drawbacks but the pros outweigh the cons. I definitively recommend this case to anyone that wants the ultimate protection for their phone and doesnt mind cleaning the lint off everyonce in a while. If you like my review please give me a thanks.

just saw one too. didnt kno that they started to make them yet. their a little bulky for my line of work. and since im a student im not really in the situations where is need THAT Much protection....but do a review if you get one.

I ordered one. As soon as it comes in I will post pics.
Sent from my SGH-T989 using xda premium

Monk4Life said:
I ordered one. As soon as it comes in I will post pics.
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Thanks bro

Monk4Life said:
Has anyone bought one of these?
http://www.ebay.com/itm/T-Mobile-Sa...ccessories&hash=item415ec6bf76#ht_2846wt_1396
I just saw it on eBay and it looks like a great case for protection but the price seems a little high.
Here is the company's site with the standard S2. They haven't added our phones yet to their site.
http://www.goballisticcase.com/products/samsung-galaxy-s2-ballistic-shell-gel-sg-series-case
Click to expand...
Click to collapse
Have you received it yet? I like the look of this case & have been checking this thread for a review....

rpolito73 said:
Have you received it yet? I like the look of this case & have been checking this thread for a review....
Click to expand...
Click to collapse
No. I received a message stating that it will ship tomorrow. I guess it wasn't even available until the 4th.
Sent from my SGH-T989 using xda premium

Monk4Life said:
No. I received a message stating that it will ship tomorrow. I guess it wasn't even available until the 4th.
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
I ordered one last night. The guy accepted my offer of $25.00 w free shipping. Should be here Monday....

rpolito73 said:
I ordered one last night. The guy accepted my offer of $25.00 w free shipping. Should be here Monday....
Click to expand...
Click to collapse
Let me know when you receive shipping confirmation. Still waiting on mine.
Sent from my SGH-T989 using xda premium

He just messaged me that he sending it now priority mail.
Here is the link
http://www.ebay.com/itm/160675376613?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
It lists for $27.99 w free shipping but you can also make offer. He accepted my $25...

Sent from my SGH-T989 using xda premium

Ok my tracking info shows it will be here monday. I will post pics and a review on my thread once I get it.

Got mine. I love it! It does add xtra bulk. Forgot cam at office. Will post pics tomorrow.
Highly recommended. Fits perfect. Buttons easy to push. 2 pieces, inside rubber and outside hard plastic. Hasn't bubbled up my zagg yet. All holes line up as they should. Looks super cool. A++++++. Can't beat it for $25 including shipping. http://www.ebay.com/itm/160675376613?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

rpolito73 said:
Got mine. I love it! It does add xtra bulk. Forgot cam at office. Will post pics tomorrow.
Highly recommended. Fits perfect. Buttons easy to push. 2 pieces, inside rubber and outside hard plastic. Hasn't bubbled up my zagg yet. All holes line up as they should. Looks super cool. A++++++. Can't beat it for $25 including shipping. http://www.ebay.com/itm/160675376613?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Click to expand...
Click to collapse
Does it add alot of thickness to it
Sent from my SGH-T989 using xda premium

mikeb85 said:
Does it add alot of thickness to it
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
I have to say yes... I'll take measurement tmrw but the corners are thicker than all of it. Its still not bad. Fits in my pocket n like how it feels in my hand ... I like the texture of back compared to the d3o.
To be fair, the rubber corners will pick up lint just like vibrant otter box. This thing is maximum protection...
Sent from my SGH-T989 using xda premium

mikeb85 said:
Does it add alot of thickness to it
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
i agree, i like the idea of the full protection but this case makes to phone wayyy to bulky, i feel like im carrying around one of those old ass phones that looked like bricks. haha

hmata01 said:
i agree, i like the idea of the full protection but this case makes to phone wayyy to bulky, i feel like im carrying around one of those all ass phone that locked like bricks. haha
Click to expand...
Click to collapse
Case looks pretty bad ass but I think it would be too big and like u said more like a brick thanks for the review op. Appreciate itit
Sent from my SGH-T989 using xda premium

Thanks, got one on order. This will be my 4th and hopefully final case for this phone, I am a fan of otterbox so I think I will like it. I started with the black bodyglove from tmobile, not a bad case but a pain in the ass to take of so I got one of the clear TPU cases from ebay and its a great case. And then the D30 came out so I exchanged the bodyglove for it, had to take it back because it fit like crap, the next one fit 95% better but is still uneven around the edges and for a $25.00 piece of rubber it should be perfect like the $7.00 one from ebay.

The first D30 that I got was from T-Mobile. That one fit perfectly, just didn't like the way how the button press felt. So then I also got a TPU case from eBay. Next thing T-Mobile gave out the cases so I picked it up, returned the original one I bought at T-Mobile store, but then the one I got from T-Mobile online, it fit 95% and was bubbling up my Realook. I was hoping for a Seidio case to come first but since I've heard good things about Ballistic case, I gave it a shot. Waiting for it to come in the mail now.

Kid Poker said:
The first D30 that I got was from T-Mobile. That one fit perfectly, just didn't like the way how the button press felt. So then I also got a TPU case from eBay. Next thing T-Mobile gave out the cases so I picked it up, returned the original one I bought at T-Mobile store, but then the one I got from T-Mobile online, it fit 95% and was bubbling up my Realook. I was hoping for a Seidio case to come first but since I've heard good things about Ballistic case, I gave it a shot. Waiting for it to come in the mail now.
Click to expand...
Click to collapse
Oh yeah, that was the other thing, the buttons. Volume not too bad, power button was a PITA on the D30.

Got the case today and its awesome.

TPU Cases

I have a light blue S line tpu from china and 3 androidified cruzerlites

fatboypup said:
I have a light blue S line tpu from china and 3 androidified cruzerlites
Click to expand...
Click to collapse
I picked up a clear S-Line case myself.

I ordered the assembling andy TPU case.

Sent from my SPH-D710 using XDA

is there anyone else that makes the androidified cases other then cruzerlite
Sent from my SPH-L710 using XDA

i just saw in another thread some guys tpu didnt fit right that the cut outs didnt line up :silly: sure hope I didnt waste 30 bucks on tpus that wont work :crying:

i got a cheap one from amazon (http://www.amazon.com/Cimo-S-Line-Flexible-Samsung-Galaxy/dp/B0087GANO2/) that the holes line up right, but there is this annoying bump on the side and it doesn't fit snug because of it... probably just a ****ed up one i got...
just ordered another one from cruzerlite (http://www.amazon.com/Clear-Androidified-CruzerLite-TPU-Case/dp/B0085U7P2I) should get it today... hopefully it works out better
---------- Post added at 11:24 AM ---------- Previous post was at 10:57 AM ----------
just got the cruzerlite case and it fits much more snug... bottom mic hole doesnt line up right, but people on the other line aren't saying its tough to hear me...
edit: i had to take off and re put on a few times to get the mic holes to line up right, its tight so once on you cant really adjust... also they have the holes cut out for the power and volume buttons unlike the Cimo one that had the covers to those buttons which made hitting the power button a pain in the ass...
this cruzerlite is the way to go...

Diztronic now available on Amazon and I just ordered one. There is none better IMHO and I've had them on every phone I have had (since android anyway)

jfenton57 said:
Diztronic now available on Amazon and I just ordered one. There is none better IMHO and I've had them on every phone I have had (since android anyway)
Click to expand...
Click to collapse
Here's the link to them, in case someone wanted to check em out: http://www.amazon.com/s/ref=nb_sb_noss?url=me=A2HOCXU5SC35JO&field-keywords=galaxy+"s+iii"

mang0 said:
Here's the link to them, in case someone wanted to check em out:
Click to expand...
Click to collapse
Ordered!! Now I just need something to put it on

jfenton57 said:
Diztronic now available on Amazon and I just ordered one. There is none better IMHO and I've had them on every phone I have had (since android anyway)
Click to expand...
Click to collapse
Nevermind..

Dang. That was fast! Diztronic case ordered Saturday morning and delivered today. Now...where's that siii?

Kevhed said:
Dang. That was fast! Diztronic case ordered Saturday morning and delivered today. Now...where's that siii?
Click to expand...
Click to collapse
Got mine today as well, fits nicely and looks good. I kind of expected it would happen since it did on my Evo 3D as well, but it picks at the corners of my screen protector. Yes, it does come with one, but I prefer the feel of the one I have on there.

The Diztronic TPU case now available

Finally. An amazing TPU case without the cheesy back design.
http://tpu-cases.com/index.php?main_page=index&cPath=42_68
Amazon link

Lol whats so amazing about them
Sent from my MB860 using XDA

The Galaxy Nexus Diztronic case is highly praised on Amazon and Reddit.
I figure the S3 case will be too.

LLStarks said:
The Galaxy Nexus Diztronic case is highly praised on Amazon and Reddit.
I figure the S3 case will be too.
Click to expand...
Click to collapse
Yes, its just a very solid tpu case.
Sent from my SAMSUNG-SGH-I717 using xda premium

Wond3r said:
Lol whats so amazing about them
Sent from my MB860 using XDA
Click to expand...
Click to collapse
The quality of the plastic is superior. Once I bought one for my Galaxy Nexus I've got one for every phone since then. They are the best TPU brand for phones.
You won't regret it. It's cheap too!

My SII Skyrocket Diztronic case ended up being my favorite of the various cases I tried.
Not at all flashy. Nothing special about it.
It just "works" properly. And doesn't get beat up like cheaper cases do.
And I like that they are finally doing cutouts for BOTH the volume & power unlike on my last case.
I hate anything covering the power or volume buttons. Though some folks do like that.

I've used these cases for 2 years on Captivate, Infuse, Galaxy Nexus and Note. They're grippy, durable and fit perfectly. I just ordered one for my S3. Thanks for the heads-up.

I already have Rock Case, 4 Cruzerlite TPU cases... and a Leather pouch... Do I need/want one more....?

I have a Cruzelite...definitely sub par to the Diztronic cases I've had in the past and I'm sure it will be the same with the new one I have on the way.

jfenton57 said:
I have a Cruzelite...definitely sub par to the Diztronic cases I've had in the past and I'm sure it will be the same with the new one I have on the way.
Click to expand...
Click to collapse
Damn you. I bought a Diztronic Matte Black.

komugi said:
Damn you. I bought a Diztronic Matte Black.
Click to expand...
Click to collapse
Matte Black is a the best color imho
Sent from my SAMSUNG-SGH-I717 using xda premium

komugi said:
I already have Rock Case, 4 Cruzerlite TPU cases... and a Leather pouch... Do I need/want one more....?
Click to expand...
Click to collapse
cruzerlite is garbage. i sent it in for a refund. the cut outs dont even line up with the ports correctly lol

Sorry for the delay in getting our S III cases up guys, I was out of town and had an employee put them up. Unfortunately she accidentally set the start selling date as July 6th so the pages never went live. I said didn't you realize we weren't getting any orders?! We sent inventory to Amazon on Friday so Prime shipping options should be available either Tuesday or Wednesday.
We did include a screen protector with this release made of Japanese film. When we first started including screen protectors we were using a Korean film, which is slightly better than Chinese but still had some rainbowing and purpling. These Japanese based ones are great, very good clarity. Even though including them almost doubles our costs we've kept our prices the same for the time being. Thanks everyone for your continued support!
Sent from my SPH-D710 using xda premium

Just got the matte-clear case! Looking forward to getting it in the mail

OneStepAhead, does the screen protector cover the entire front and have cut-outs?

Wond3r said:
Lol whats so amazing about them
Click to expand...
Click to collapse
The company resides and manufactures in America (Madison, WI, near me!!). The customer service is absolutely OUTSTANDING. You basically end up talking to a real person who is dead set on making sure you're satisfied.
And TPU, in general, is perfect for me. Thin, adds a little grip but doesn't stick in pockets.

vince1234 said:
cruzerlite is garbage. i sent it in for a refund. the cut outs dont even line up with the ports correctly lol
Click to expand...
Click to collapse
cldn't agree more, they are indeed bad. Just ordered Diztronic for my S III . Loved it on my Nexus , was waiting for a week for it to be available in the meanwhile i thought i would try cruzerlite . Apart from the fit, i dint like the looks of it too, esp that i wanted something with a plain back matte finish . Diztronic was the perfect fit . Love it Love it!!!

Actually they are in Madison, but my EVO 4G LTE Diz TPU's specifically stated Manufactured in China.
I put them in a bowl of water and they don't sink so I'd guess they aren't full of lead.
The water did turn green and looked like antifreeze though (just kidding!)

jfenton57 said:
Actually they are in Madison, but my EVO 4G LTE Diz TPU's specifically stated Manufactured in China.
I put them in a bowl of water and they don't sink so I'd guess they aren't full of lead.
The water did turn green and looked like antifreeze though (just kidding!)
Click to expand...
Click to collapse
We are in Madison, WI but unfortunately we have our cases made in China for the time being. I'm looking at potentially having them made in Akron, OH but it's not set in stone at this point. If anyone has any contacts with US based factories that can manufacturer TPU cases feel free to contact me. For now we are using the same lingo everyone else uses, "Designed in ___ Manufactured in China". Our screen protectors however are manufactured in Japan. Some of you should be receiving your GS III cases today, I know at least one XDA member received theirs on Saturday as they were in Wisconsin. I'm looking forward to seeing some feedback as my GS III from Sprint hasn't arrived yet!
---------- Post added at 12:52 PM ---------- Previous post was at 12:44 PM ----------
LLStarks said:
OneStepAhead, does the screen protector cover the entire front and have cut-outs?
Click to expand...
Click to collapse
It doesn't have a cutout for the camera, as in my opinion I'd rather have it covered so it's protected. If someone can show me an example of diminished picture quality because of it I may be swayed to make a cutout for it in the future. As far as going all the way to the edge of the glass, from what I understand it's not possible to do so on the GS III because of the way the glass tapers on the edges, so we made the screen protector in the same way as our One X screen protector. It essentially covers the flat part of the glass. You could probably go all the way to the edge with a wet adhesive based screen protector, but with a static type screen protector they would just peel up.

OneStepAhead said:
We are in Madison, WI but unfortunately we have our cases made in China for the time being. I'm looking at potentially having them made in Akron, OH but it's not set in stone at this point. If anyone has any contacts with US based factories that can manufacturer TPU cases feel free to contact me. For now we are using the same lingo everyone else uses, "Designed in ___ Manufactured in China". Our screen protectors however are manufactured in Japan. Some of you should be receiving your GS III cases today, I know at least one XDA member received theirs on Saturday as they were in Wisconsin. I'm looking forward to seeing some feedback as my GS III from Sprint hasn't arrived yet!
---------- Post added at 12:52 PM ---------- Previous post was at 12:44 PM ----------
It doesn't have a cutout for the camera, as in my opinion I'd rather have it covered so it's protected. If someone can show me an example of diminished picture quality because of it I may be swayed to make a cutout for it in the future. As far as going all the way to the edge of the glass, from what I understand it's not possible to do so on the GS III because of the way the glass tapers on the edges, so we made the screen protector in the same way as our One X screen protector. It essentially covers the flat part of the glass. You could probably go all the way to the edge with a wet adhesive based screen protector, but with a static type screen protector they would just peel up.
Click to expand...
Click to collapse
Great response. Its great to have good interraction with the manufacture and the end user. That makes for the best experience in both parties. Thank you.

The generic 99c/99p/€0.99 eBay case thread - discussion and reviews

So I'm based in the UK so I'll be posting stuff more from the UK side of things but will try to update this first post as much as possible and try and help owners all over the world if people contribute. Try and make this as awesome as the Nexus 5 thread!
UK - Last updated 28/July/14
Black Silicone Gel Rubber Thin Back Soft Cover Case Skin For OnePlus One A0001 - 99p
Fashion Silicone Gel Rubber Thin Back Soft Cover Case Skin For OnePlus One A0001 - Black/Blue/Pink/White 99p
**Cheapest UK based seller** GEL CASE SKIN TPU COVER FOR NEW ONEPLUS ONE SMARTPHONE - Black/Blue/Pink/White £2.95
US
Please help!
Will review this once I get my hands on it

I have it. Nothing much to review really, it's just your usual generic TPU case.
If you insist on one, a redditor posted this Orzly TPU case review (which I'm almost sure is the same one really, just with a higher price tag):
On a personal note - I quite like it. Fits the device well with ports for everything. Pressing the volume/power button can be a tad harder, but nothing major really. Is quite "grippy"/rough on the back. I also have a tempered glass screen protector (by Orzly) and it seems to cover that up too with almost no buffer left (with less of a "bump"', obviously, between the screen and the top of the case).
In any case, you really can't go wrong with a dollar. You'll surely find something better down the line in a month or so (see the Diztonic case that's coming), but this is good, even if you'll only use it until a better one comes out.

benthe said:
I have it. Nothing much to review really, it's just your usual generic TPU case.
If you insist on one, a redditor posted this Orzly TPU case review (which I'm almost sure is the same one really, just with a higher price tag):
On a personal note - I quite like it. Fits the device well with ports for everything. Pressing the volume/power button can be a tad harder, but nothing major really. Is quite "grippy"/rough on the back. I also have a tempered glass screen protector (by Orzly) and it seems to cover that up too with almost no buffer left (with less of a "bump"', obviously, between the screen and the top of the case).
In any case, you really can't go wrong with a dollar. You'll surely find something better down the line in a month or so (see the Diztonic case that's coming), but this is good, even if you'll only use it until a better one comes out.
Click to expand...
Click to collapse
where are you located... I just got my phone and trying to pick up something as quickly as possible....How long did it take to get to you
thx

playya said:
where are you located... I just got my phone and trying to pick up something as quickly as possible....How long did it take to get to you
thx
Click to expand...
Click to collapse
Save your money and get a diztronic case, it'll be out by the end of the week.
Looks very good too. http://forum.xda-developers.com/showpost.php?p=53906557&postcount=2

zephiK said:
Save your money and get a diztronic case, it'll be out by the end of the week.
Looks very good too. http://forum.xda-developers.com/showpost.php?p=53906557&postcount=2
Click to expand...
Click to collapse
When ordering my device from AliExpress I ordered the TPU case bundled with it, for exactly the reason I mentioned previously - so I have something up until a better case comes along.
I ordered it to the UK, but I'm sure that if you have Amazon or eBay locally you can find a seller that can ship that to quite fast.
---------- Post added at 09:53 AM ---------- Previous post was at 09:52 AM ----------
zephiK said:
Save your money and get a diztronic case, it'll be out by the end of the week.
Looks very good too. http://forum.xda-developers.com/showpost.php?p=53906557&postcount=2
Click to expand...
Click to collapse
I'm planning on getting the Diztronic case as well, don't get it me wrong - it does look great. But again, you can't go wrong with a dollar, I mean, you probably paid more to get to work today than on this case, so even if you served you protection for a couple of hours it's still worth it, time/money-wise.

Thanks for sharing
Sent from my One using XDA Free mobile app

I wish I could find just one of these that would get to the US in less than a week, everything is from China or UK.
Anyone find any TPU that ships from the US?

orangekid said:
I wish I could find just one of these that would get to the US in less than a week, everything is from China or UK.
Anyone find any TPU that ships from the US?
Click to expand...
Click to collapse
Wait for the diztronic case it'll be ready by the end of the week is the estimated date. Keep a eye out on the diztronic thread. It'll cost $10 but is of high quality.
Sent from my One using Tapatalk

zephiK said:
Wait for the diztronic case it'll be ready by the end of the week is the estimated date. Keep a eye out on the diztronic thread. It'll cost $10 but is of high quality.
Sent from my One using Tapatalk
Click to expand...
Click to collapse
I guess I'll have to. I hate letting my phone go naked for even 2 hours, I may just keep it in the box until I get my hands on the diztronic.
$10 isn't that much considering I spend almost that much on a Chipotle burrito for lunch...

orangekid said:
I guess I'll have to. I hate letting my phone go naked for even 2 hours, I may just keep it in the box until I get my hands on the diztronic.
$10 isn't that much considering I spend almost that much on a Chipotle burrito for lunch...
Click to expand...
Click to collapse
Hehe I'm a very careful person, been using it for over a week and am pretty careful but for sure.. wouldn't want something bad happening
Pictures of the case: http://forum.xda-developers.com/showpost.php?p=53906557&postcount=2

zephiK said:
Hehe I'm a very careful person, been using it for over a week and am pretty careful but for sure.. wouldn't want something bad happening
Pictures of the case: http://forum.xda-developers.com/showpost.php?p=53906557&postcount=2
Click to expand...
Click to collapse
yeah I saw that, looks really nice.
I ordered the $1 TPU just in case too, never hurts to have too many.
Won't get here for 3 weeks, but it's just a dollar...
I saw these tempered glass screenies I think I'll get too (just use some $1 ones till these come in)
http://www.amazon.com/Ebestsale-Pro...8&sr=8-27&keywords=tempered+glass+oneplus+one
3 of them for only $13 shipped is pretty amazing. I wonder if they are any different in quality than the $20 ones, I mean tempered glass is tempered glass, right?

orangekid said:
yeah I saw that, looks really nice.
I ordered the $1 TPU just in case too, never hurts to have too many.
Won't get here for 3 weeks, but it's just a dollar...
I saw these tempered glass screenies I think I'll get too (just use some $1 ones till these come in)
http://www.amazon.com/Ebestsale-Pro...8&sr=8-27&keywords=tempered+glass+oneplus+one
3 of them for only $13 shipped is pretty amazing. I wonder if they are any different in quality than the $20 ones, I mean tempered glass is tempered glass, right?
Click to expand...
Click to collapse
Some are thinner, some have curved sides, and some have better oleophobic coatings.

Kawaisa said:
Some are thinner, some have curved sides, and some have better oleophobic coatings.
Click to expand...
Click to collapse
Does that really matter in everyday usage?
Sent from my Nexus 5 using XDA Premium 4 mobile app

updated 1st post

orangekid said:
Does that really matter in everyday usage?
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
thinness? not really, curved edges? yes, they feel better and are less likely to chip

Is there a Diztronic supplier in the UK?
Gonna get this in the meantime I think http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=360965245307 - not 99p but cheap enough until I find something better

Salty Wagyu said:
Is there a Diztronic supplier in the UK?
Gonna get this in the meantime I think http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=360965245307 - not 99p but cheap enough until I find something better
Click to expand...
Click to collapse
Thanks for the heads up on this, been looking for a UK supplier to get a cheap case quickly whilst I wait for my pelosi case to be shipped from China.
Sent from my Nexus 5 using Tapatalk

Salty Wagyu said:
Is there a Diztronic supplier in the UK?
Gonna get this in the meantime I think http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=360965245307 - not 99p but cheap enough until I find something better
Click to expand...
Click to collapse
adding this to the list, thanks

I got my cheap TPU case today, it feels good, fits well, cut outs fine. very good for the price, no complaints!

toge64 said:
I got my cheap TPU case today, it feels good, fits well, cut outs fine. very good for the price, no complaints!
Click to expand...
Click to collapse
link?