Develop Bugs

[JB 4.2][KERNEL][CWM&TWRP]Mackay kernel 0.399Final (14-Aug-2013)

Just like for CM9&CM10, I started making a CM10.1 kernels. The philosophy is the same: stock plus a few extras
This kernel is based on my CM10 Mackay kernel.
If you like a CM10.1-based ROM with the Mackay kernel included, there is also Mackay ROM:
http://forum.xda-developers.com/showthread.php?t=2024269
Thanks to all SGS-CM-kernel developers (pawitp, stratosk, DerTeufel, Glitch, mialwe, krarvind) , I learned a lot from all of you!
Changelog 0.399 compared to previous release (0.341)
-Final build for JB4.2
-linux v3.0.90
On 2.7.0+ Mackay ROMs, BLN/recovery/navbar can be activated in Mackay settings*
On other roms, install the kernel, reboot, open /data/local/mackay/bln/recovery/navbar and change the 0 for 1. Then reboot:
bln (set to 1) BLN will be activated
recovery (set to 1) CWM will be activated
navbar (set to 1) navbar will be activated
As an alternative, Bejda developed a script for Mackay settings:
http://forum.xda-developers.com/showpost.php?p=41729828&postcount=953
All features compared to stock kernel:
Features:
-Build using the Cortax-A8 optimized Linaro 4.7.4 toolchain of Christopher83: http://forum.xda-developers.com/showthread.php?t=2098133
-Christopher86's cortex-A8 optimized Linaro toolchain (June version)
-O3 optimization
-updated to linux kernel version 3.0.90
-SLQB memory allocator (default, should be slightly faster)
-XZ compression of kernel & initramfs
-395MB RAM
-SIO scheduler
-Added Lagfree governor
-ROW scheduler (tweaked, default scheduler)
-FIOPS scheduler (tweaked)
-XZ compression of kernel & initramfs
-395MB RAM
-many improvements to IO schedulers in general
-Deadline tuning (thanks to DerTeufel)
-Ondemand tuned (default governor)
-SmartassV2 governor
-Interactive governor (updated to android 3.4 code + fixes)
-Wheatley & Lulzactive governors
-Conservative tuned
-Call volume hack (use “Settings>Mackay Settings”* to set volumes)
-Reduced battery polling interval
-Fast charge (activate through “Settings>Advanced Settings”* or the QuickCharge toggle in MackayROM)
-WiFi PM_FAST mode selection (activate using “Settings>Mackay Settings”*)
-Battery life extender (set through “Settings>Mackay Settings”*)
-CustomVoltage (set using NSTools)
-BLN (can be enabled through “Settings>Mackay Settings”*)
-USB OTG support (needs external power supply)
-1100-1400MHz OC steps
-Custom kernel splash (Thanks to Malcho)
-Updated charging logo to match open charger
-Disabled swap & zram
-Improve memcopy/memmove
-Improve the performance of memcpy and memmove
-Kill task closest in size to memory needed to free
-LOAD_FREQ (4*HZ+61) avoids loadavg Moire
-Entropy tweaks: http://lwn.net/Articles/489734/
-backport CPUIDLE from 3.5
-arm/crypto: Add optimized AES and SHA1 routines
-Unaligned CPU access
-Updates to binder
-Improvements to RWSEM code
-Improvements to binder code
-Improvements to tmpfs
-Added frandom (much faster random number generator)
-Updated to lowmemorykiller with PID whitelist (thanks to stratosk)
-Updated wifi driver to 5.90.195.114
-Updated GPU driver to DDK [email protected]
*“Settings>Mackay Settings” only available with Mackay ROM 2.7.0+
*also available through the Galaxy S & Mackay app in the launcher
bootable/recovery:
-Mackay recovery (based on CWM 6.0.3.5 & TWRP 2.6-beta)
CWM:
-Clear NSTools settings
-Clear init.d settings
-Show battery status in recovery
-Aroma FileManager
-Include using soft keys to navigate the menu (thanks fishears for the idea)
-Enable holding keys for repeated presses
-Themed orange
TWRP:
-Themed orange
-Run recovery-apps (zip files should be present in /system/mackay, launch them through advanced->run app)
-Build in a script to reboot from twrp to cwm*
*To use this feature from TWRP, tap advanced>run app>rebootcwm.zip. Then from the homescreen choose: reboot>recovery
Downloadable with CMC & voodoo colour:
https://s.basketbuild.com/devs/kasperhettinga/sgs/kernel/pre-KK/
Source code: https://github.com/kasperhettinga/samsung-kernel-aries/commits/mackay-cm101
This is a freshly started project. Ideas for improvements/additions are welcome but:
1. I try to stay close to stock
2. The time I spend on features depends on how much I like them myself
Credits:
-teamhacksung/pawitp for making CyanogenMod work on our ancient phone
-stratosk/DerTeufel/Mialwe for the inspiration I got from their kernels
-rootax for providing a high-speed server for high quality downloads
Download (TWO flavours can be download: CMC=CM stock colour or VC=Voodoo Colour ):
http://rootaxbox.no-ip.org/kasper_h/kernels/JB42/
For those who want to theme it even further, Bejda made a Mackay splash screen!
http://forum.xda-developers.com/showthread.php?t=2214468
For those who want to theme TWRP (or simply get rid of the orange ), erpurohit made a TWRP theme:
http://forum.xda-developers.com/showthread.php?t=2262937
This version can only be used on JB4.2-based ROMs
FAQ
Q. I can't change governor in NStools (or any similar app)
A. Go to recovery, mount data & datadata partition, then fix permission. You can also install the fix permissions app to this for you: http://bit.ly/YxPgLD
Q. Process x (e.g. mediaserver/phone) is eating 50+% of my battery, what should I do?
A. Go to settings>apps>all and find the app which is causing the battery drain. Then delete app data and reboot phone. If it does not help, you can combine this step with clearing dalvik cache.

Thanks!

I have WiFi problems on CM10.1 with your kernel! For me only latest patch from pawitp solve the problems with wifi.
Sent from my GT-I9000 using xda premium

Which ROM exactly. I'll post a test version with a possible fix soon

The latest build 1202,some more your kernel is WiFi tethering broken...

kfheaven said:
The latest build 1202,some more your kernel is WiFi tethering broken...
Click to expand...
Click to collapse
Can you post a link to the thread were the ROM is from? Because there are no official 10.1 builds...
sent from my galaxy tab using XDA Premium HD

kasper_h said:
Can you post a link to the thread were the ROM is from? Because there are no official 10.1 builds...
sent from my galaxy tab using XDA Premium HD
Click to expand...
Click to collapse
Is pawitp latest build...

OK, that is AOSP, not CM10.1. It seems there is a problem then with his AOSP with my kernel?! I'll try to make a fix anyway

SORRY, uploaded a kernel without a wifi-fix telling everyone it had the wifi-fix. New version coming soon!

The "real" wifi-fix kernel:
http://rootaxbox.no-ip.org/kasper_h/kernels/JB42/Mackay_kernel_0.201wifitest-update-signed.zip

Small update to 0.202
-merged wifi patches & wififix of pawitp.
Download:
http://rootaxbox.no-ip.org/kasper_h/kernels/JB42/

Downloading and, tonight, installing!
Thanks!

//deleted//
Posted in wrong thread haha. Oops!

Does this kernel support the battery charging limit, as explained here:
http://forum.xda-developers.com/showthread.php?p=34998863
Sent from my GT-I9000 using xda app-developers app

Will try and report on my experience with this kernel
To install do I just install like any other kernel or do I need any libs, etc.
Sent from my GT-I9000 using xda app-developers app

Really like the overclock options of 1200/1400, but wifi doesnt work in this kernel.
I saw that pawitp added another tweak to enable wifi at https://github.com/pawitp/android_k...mmit/c3af7954523610e9df0abff656fe93095361d2dc
Has this patch been included in the kernel ?
EDIT:
This is the workaround i currently use for enabling WIFI:
1. Turn off phone.
2. Take out SD card.
3. Turn on phone and let it start up properly.
4. Insert SD card.
5. Enable SD card in settings.

jask489 said:
Does this kernel support the battery charging limit, as explained here:
http://forum.xda-developers.com/showthread.php?p=34998863
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Yes, use NSTools to set the charging limit
alb3rtt said:
Will try and report on my experience with this kernel
To install do I just install like any other kernel or do I need any libs, etc.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
All necessary files are included, so just flash and be happy
No need to wipe anything (like cache or anything). Clean and simple
Sharken said:
Really like the overclock options of 1200/1400, but wifi doesnt work in this kernel.
I saw that pawitp added another tweak to enable wifi at https://github.com/pawitp/android_k...mmit/c3af7954523610e9df0abff656fe93095361d2dc
Has this patch been included in the kernel ?
EDIT:
This is the workaround i currently use for enabling WIFI:
1. Turn off phone.
2. Take out SD card.
3. Turn on phone and let it start up properly.
4. Insert SD card.
5. Enable SD card in settings.
Click to expand...
Click to collapse
I will build a new kernel version based on the latest wifi-fixes of pawitp later today.

New build in OP: 0.204. Contains all upstream changes pawitp made to fix wifi & updated linux version to 3.0.54.

Kernel build 0.204: Wifi now works flawlessly, great!
Sent from my GT-I9000 using xda app-developers app

First impression. Great speed, love the boot splash screen and great battery. Will test more later but loving this kernel so far. Great work dude
Sent from my GT-I9000 using xda app-developers app

[JB 4.3][KERNEL][CWM/TWRP/SwitchSD]Mackay kernel 0.599Final (7-Dec-2013

Just like for CM9&CM10&CM10.1, I started making a CM10.2/JB4.3 kernel. The philosophy is the same: stock plus a few extras
This kernel is based on my CM10.1 Mackay kernel, updated using upstream patches from CM10.2
Thanks to all SGS-CM-kernel developers (pawitp, stratosk, DerTeufel, Glitch, mialwe, krarvind), I learned a lot from all of you!
Separate bigmem libs for other kernels:
http://forum.xda-developers.com/showpost.php?p=44495730&postcount=16
Changelog 0.599
-Final release for JB4.3
-Identical in code to KK version of kernel
-4 version:
-CWM & TWRP
-Swapped SD (CWM & TWRP) -> I have no external SD, so I didn't test this one!
All features compared to stock kernel:
Features:
-Build using the Cortax-A8 optimized Linaro 4.7.4 toolchain of Christopher83: http://forum.xda-developers.com/showthread.php?t=2098133
-Christopher86's cortex-A8 optimized Linaro toolchain (September version)
-O3 optimization
-updated to linux kernel version 3.0.101
-SLQB memory allocator (default, should be slightly faster)
-XZ compression of kernel & initramfs
-395MB RAM
-SIO scheduler
-Added Lagfree governor
-ROW scheduler (tweaked, default scheduler)
-FIOPS scheduler (tweaked)
-XZ compression of kernel & initramfs
-395MB RAM
-many improvements to IO schedulers in general
-Deadline tuning (thanks to DerTeufel)
-Ondemand tuned (default governor)
-SmartassV2 governor
-Interactive governor (updated to android 3.4 code + fixes)
-Wheatley & Lulzactive governors
-Conservative tuned
-Call volume hack (use “Settings>Mackay Settings”* to set volumes)
-Reduced battery polling interval
-Fast charge (activate through “Settings>Advanced Settings”* or the QuickCharge toggle in MackayROM)
-WiFi PM_FAST mode selection (activate using “Settings>Mackay Settings”*)
-Battery life extender (set through “Settings>Mackay Settings”*)
-CustomVoltage (set using NSTools)
-BLN (can be enabled through “Settings>Mackay Settings”*)
-USB OTG support (needs external power supply)
-1100-1400MHz OC steps
-Custom kernel splash (Thanks to Malcho)
-Updated charging logo to match open charger
-Disabled swap & zram
-Improve memcopy/memmove
-Improve the performance of memcpy and memmove
-Kill task closest in size to memory needed to free
-LOAD_FREQ (4*HZ+61) avoids loadavg Moire
-Entropy tweaks: http://lwn.net/Articles/489734/
-backport CPUIDLE from 3.5
-arm/crypto: Add optimized AES and SHA1 routines
-Unaligned CPU access
-Updates to binder
-Improvements to RWSEM code
-Improvements to binder code
-Improvements to tmpfs
-Added frandom (much faster random number generator)
-Updated to lowmemorykiller with PID whitelist (thanks to stratosk)
-Updated wifi driver to 5.90.195.114
-Updated GPU driver to DDK [email protected]
-Proportional Rate Reduction for TCP
-Introduce timer slack controller
*“Settings>Mackay Settings” only available with Mackay ROM 3.x.x (to be released soon)
*also available through the Galaxy S & Mackay app in the launcher
On other roms, install the kernel, reboot, open /data/local/mackay/bln/recovery/navbar and change the 0 for 1. Then reboot:
bln (set to 1) BLN will be activated
navbar (set to 1) navbar will be activated
As an alternative, Bejda developed a script for Mackay settings:
http://forum.xda-developers.com/showpost.php?p=41729828&postcount=953
bootable/recovery:
-Mackay recovery (based on TWRP 2.6.3.0)
TWRP:
-Themed orange
-Run recovery-apps (zip files should be present in /system/mackay, launch them through advanced->run app)
Source code: https://github.com/kasperhettinga/samsung-kernel-aries/commits/mackay-cm102
This is a freshly started project. Ideas for improvements/additions are welcome but:
1. I try to stay close to stock
2. The time I spend on features depends on how much I like them myself
Credits:
-teamhacksung/pawitp for making CyanogenMod work on our ancient phone
-stratosk/DerTeufel/Mialwe for the inspiration I got from their kernels
-rootax for providing a high-speed server for high quality downloads
Downloadable with CMC & voodoo colour:
https://s.basketbuild.com/devs/kasperhettinga/sgs/kernel/pre-KK/
For those who want to theme it even further, Bejda made a Mackay splash screen!
http://forum.xda-developers.com/showthread.php?t=2214468
This version can only be used on JB4.3-based ROMs
Kernel for switching internal & external SD
Because vold.fstab is no longer used and has been integrated in fstab.aries (which can only be changed before compiling the kernel, as it ends up in the ramdisk), I made a special kernel version with switched SD cards:
http://rootaxbox.no-ip.org/kasper_h/kernels/JB43/switchSD/

kasper_h said:
-ALPHA build, unknown stability
Click to expand...
Click to collapse
Using it since Yesterday evening - all good so far. Thanks.

I9000B
Hi kasper_h,
Just to confirm, no support to I9000B, right?
any plans to support it?:fingers-crossed:

@kasper_h will you add sioplus in your kernel ?
Sent from my GT-I9000 using xda app-developers app

fmc000 said:
Using it since Yesterday evening - all good so far. Thanks.
Click to expand...
Click to collapse
This one has improved bigmem libs compared to the test version I send you yesterday.
Celso Marques said:
Hi kasper_h,
Just to confirm, no support to I9000B, right?
any plans to support it?:fingers-crossed:
Click to expand...
Click to collapse
No, I only support devices I own/have direct access to.
Others can easily take my code from github and compile for other devices.
DerRomtester said:
@kasper_h will you add sioplus in your kernel ?
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
No plans yet, maybe once everything works as it should and I have some time for things like that.
Verstuurd van mijn GT-I9000

My boot time seems a bit long with mackay kernel.

DerRomtester said:
My boot time seems a bit long with mackay kernel.
Click to expand...
Click to collapse
always been like that (don't know why, though).

fmc000 said:
always been like that (don't know why, though).
Click to expand...
Click to collapse
The cause of the slow boot is the complicated ramdisk with two recoveries that need to be extracted at every boot.
Verstuurd van mijn GT-I9000

kasper_h said:
The cause of the slow boot is the complicated ramdisk with two recoveries that need to be extracted at every boot.
Verstuurd van mijn GT-I9000
Click to expand...
Click to collapse
Got it, thanks.
Sent from my SGS using Tapatalk.

Great great the best kernel for i9000 come on android 4.3
I will test in the next days
Love your job kasper_h
Thanks

Pretty good so far, nothing more, nothing less that 4.2 version.
Sent from my GT-I9000 using xda premium

I tried to install,Mackay kernel 0.403 in C: ROM 4.3 and it gives me error.

mamoto66 said:
I tried to install,Mackay kernel 0.403 in C: ROM 4.3 and it gives me error.
Click to expand...
Click to collapse
It would be helpful if you tell a but more than that...What error. When. Etc.

kasper_h said:
It would be helpful if you tell a but more than that...What error. When. Etc.
Click to expand...
Click to collapse
Sorry, the problem is that in C-ROM,Screen stays Mackay logo and does not start.I tested with Devil kernel and it works.Thanks.
Does the same problem in 4.3 Slim Rom.

Just a report, that bigmem libs extracted from the zip works great
thanks kasper_h

didhiy said:
Just a report, that bigmem libs extracted from the zip works great
thanks kasper_h
Click to expand...
Click to collapse
Attached to this post a flashable version of the bigmem libs.

mamoto66 said:
Sorry, the problem is that in C-ROM,Screen stays Mackay logo and does not start.I tested with Devil kernel and it works.Thanks.
Does the same problem in 4.3 Slim Rom.
Click to expand...
Click to collapse
i can confirm this, tested and phone stays at kernel logo kasper_h.

aways said:
i can confirm this, tested and phone stays at kernel logo kasper_h.
Click to expand...
Click to collapse
Me too.
Sent from my GT-I9000 using Tapatalk 2

mamoto66 said:
Sorry, the problem is that in C-ROM,Screen stays Mackay logo and does not start.I tested with Devil kernel and it works.Thanks.
Does the same problem in 4.3 Slim Rom.
Click to expand...
Click to collapse
Just tried , same thing happens on CyanAOSP 4.3 too. Devil and CM kernel works fine.

That is really odd, because it does work fine on both my own ROM and CM10.2 :S
I also tried building my own Carbon ROM, and also there it did boot fine.
But I will take a look whether I can find something...

[JB 4.3][ROM]Infamous AOKP 1.1

[JB 4.3][ROM]Infamous AOKP 1.1
As many users requested an update of Infamous AOKP for JB4.3, I decided to give it a try!
I have been sharing my CM7/CM9/CM10/CM10.1 builds for some time in several thread, which culminated in the MackayROM & Infamous AOKP. I continue now with JB4.3 from where I was for JB4.2. Infamous AOKP is based on AOKP sources, with several performance enhancements.
About AOKP: AOKP is a free, community built, aftermarket firmware distribution of Android 4.3 (JellyBean), which is designed to increase performance and reliability over stock Android for your device.
Disclaimer: I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
If you run into errors, I may not be able to solve it!
If you know a solution to a problem, either upload it yourself to Gerrit Code Review or contact me through pm.
The ROM is based on AOKP sources with the following changes:
-Mackay Kernel:
-Set of cherries picked from gerrit (differing by the day)
-Some additional patches I did myself to the source code
Feature request are OK, but remember:
1. I try to stay close to stock
2. I will not include additional apps, unless they can be build from source
3. The time I spend on features depends on how much I like them myself
Changelog of 1.1 - 09-Oct-2013
-Source updated to 9-Oct
-Newest kernel (with zram) & updated device tree
Changelog of 1.0 - 25-Sep-2013
-First ALPHA build
-I booted it to be sure it works, but it has not been extensively tested
Full changelog of 1.0 compared to stock AOKP:
AOKP sources of 25-Sep-2013
All features compared to stock kernel:
-Mackay kernel 0.415: http://forum.xda-developers.com/showthread.php?t=2397502
-Christopher86's cortex-A8 optimized Linaro toolchain (September version)
-O3 optimization
-updated to linux kernel version 3.0.96
-SLQB memory allocator (default, should be slightly faster)
-XZ compression of kernel & initramfs
-395MB RAM
-SIO scheduler
-Added Lagfree governor
-ROW scheduler (tweaked, default scheduler)
-FIOPS scheduler (tweaked)
-XZ compression of kernel & initramfs
-395MB RAM
-many improvements to IO schedulers in general
-Deadline tuning (thanks to DerTeufel)
-Ondemand tuned (updated based on code of stratosk)
-SmartassV2 governor
-Interactive governor (updated to android 3.4 code + fixes)
-Wheatley & Lulzactive governors
-Conservative tuned
-Call volume hack (use “Settings>Mackay Settings”* to set volumes)
-Reduced battery polling interval
-Fast charge (activate through “Settings>Advanced Settings”* or the QuickCharge toggle in MackayROM)
-WiFi PM_FAST mode selection (activate using “Settings>Mackay Settings”*)
-Battery life extender (set through “Settings>Mackay Settings”*)
-CustomVoltage (set using NSTools)
-USB OTG support (needs external power supply)
-1100-1400MHz OC steps
-Custom kernel splash (Thanks to Malcho)
-Updated charging logo to match open charger
-Disabled swap & zram
-Improve memcopy/memmove
-Improve the performance of memcpy and memmove
-Kill task closest in size to memory needed to free
-LOAD_FREQ (4*HZ+61) avoids loadavg Moire
-Entropy tweaks: http://lwn.net/Articles/489734/
-backport CPUIDLE from 3.5
-arm/crypto: Add optimized AES and SHA1 routines
-Unaligned CPU access
-Improvements to RWSEM code
-Improvements to binder code
-Improvements to tmpfs
-Added frandom (much faster random number generator)
-Updated to lowmemorykiller with PID whitelist (thanks to stratosk)
-Many parts of the code build as module to reduce effective kernel size
-Updated wifi driver to 5.90.195.114
-Updated GPU driver to DDK [email protected]
-Proportional Rate Reduction for TCP
-Introduce timer slack controller
ROM comes with stock colour. Version with voodoo colour can be downloaded from:
http://rootaxbox.no-ip.org/kasper_h/kernels/JB43/
Kernel for switching internal & external SD
Because vold.fstab is no longer used and has been integrated in fstab.aries (which can only be changed before compiling the kernel, as it ends up in the ramdisk), I made a special kernel version with switched SD cards:
http://rootaxbox.no-ip.org/kasper_h/kernels/JB43/switchSD/
*Available through Settings>Mackay Settings
CWM:
-Clear NSTools settings
-Clear init.d settings
-Show battery status in recovery
-Aroma FileManager
-Include using soft keys to navigate the menu (thanks fishears for the idea)
-Enable holding keys for repeated presses
-Themed orange
TWRP:
-Themed orange
-Run recovery-apps (zip files should be present in /system/mackay, launch them through advanced->run app)
-Build in a script to reboot from twrp to cwm*
*To use this feature from TWRP, tap advanced>run app>rebootcwm.zip. Then from the homescreen choose: reboot>recovery
Added apps:
-AngryGPS
vendor/aokp:
-Adapt for custom Infamous building (bootanimation, ROM&file name)
-Custom bootanimation (Thanks to Infamous team)
device/samsung/aries-common:
-Sets app-close to 1000 ms
hardware/samsung:
-F4k 720p patch for bigmem kernels
AriesParts (“Mackay Settings” in Settings menu):
Add mackay kernel settings options:
>Recovery selection
>WiFi PM mode selection
>BLX settings
>BLN activation
Coming from stock Samsung ROM/CM7:
-The safest way is to flash CM9 first and then flash Mackay ROM. Going directly from Samsung ROM/CM7 to Mackay ROM may lead to loosing IMEI.
Fresh install:
Can be flashed on top of any CyanogenMod build:
-Do a factory reset
-Flash ROM
-Flash a gapps packages of choice
-Reboot your phone
Update:
-Flash ROM
-Reboot your phone
(no wipes or other things needed, just flash & reboot
-Custom kernels can be used only if specific for JB4.3
Credits:
-teamhacksung/pawitp for making CyanogenMod work on our ancient phone
-AOKP for the basecode used
-stratosk/DerTeufel/Mialwe for the inspiration I got from their kernels
-rootax & xdafileserver for providing a high-speed server for high quality downloads
-Malcho for his kernel splash & bootanimation
Downloads:
XDAfileserver
Rootaxbox (still uploading, please use XDAfileserver)
Google Apps
http://goo.im/gapps
For those who want to theme it even further, Bejda made a Mackay splash screen!
http://forum.xda-developers.com/showthread.php?t=2214468
To download the same kernel, but then with voodoo colour:
http://rootaxbox.no-ip.org/kasper_h/kernels/JB43/
XDA:DevDB Information
Infamous AOKP, a ROM for the Samsung Galaxy S I9000
Contributors
kasper_h
ROM OS Version: 4.3.x Jellybean
ROM Kernel: Linux 3.0.x
Based On: AOKP
Version Information
Status: Beta
Created 2013-09-25
Last Updated 2013-10-09

Reserved

Thank

Thank

bootanimation very cool, the touch buttons does not seem to go very well and when you enter settings take small screenshots
EDIT:
solved installing gapps. sorry for the negative post

awesomee! a new AOKP for our i9000!! hoppefully certainly be improved and very stable, you're a fantastic developer

Very good rom.I like the settings(ribbons...)Congratulations.

Rom is very good working without problem, only thing i miss is the settings for kernel (cpu,governor,scheduler etc) in mackay settings there is not option, neither in system. Is something i forget to do?or it is not implemented?
Also i cannot find the quick settings and the most settings for status bar toggles(custom toggles) are grey,not selectable but this is not problem rather a report(used to it from mackay 4.3 cm). And a question,is there a way to have dsp manager without a notification in status bar?
Thank you for bringing aokp 4.3 to our sgs, also, boot animation is nice
Sent from my GT-I9000 using xda app-developers app

I had problems with apn, to apply and remove WiFi connection disappears even taking 3g apn

slipknot31 said:
I had problems with apn, to apply and remove WiFi connection disappears even taking 3g apn
Click to expand...
Click to collapse
Copy /system/etc/apns-conf.xml from the latest nightly and paste to /etc. (You'll replace that old one with it). Set permission to 777 and reboot. After rebooting open APN settings and: menu, reset to default! It worked me.

saszseb said:
Copy /system/etc/apns-conf.xml from the latest nightly and paste to /etc. (You'll replace that old one with it). Set permission to 777 and reboot. After rebooting open APN settings and: menu, reset to default! It worked me.
Click to expand...
Click to collapse
Hello I changed the file APNs but nothing has changed. Where to change the set permission 777?
tanks

Giandi said:
Hello I changed the file APNs but nothing has changed. Where to change the set permission 777?
tanks
Click to expand...
Click to collapse
By 777 he means to change the permissions of the file to rw-r-r as the other files (use root explorer and long press the file to find permissions).

tsatomas said:
By 777 he means to change the permissions of the file to rw-r-r as the other files (use root explorer and long press the file to find permissions).
Click to expand...
Click to collapse
read: 4
write: 2
execute: 1
(Maybe 644 is enough.)
Sent from my GT-I9000 using Tapatalk 4

Well, i am not good in counting perm,i change it as the original or as the other files are!
Sent from my GT-I9000 using xda app-developers app

Hey kasper_h,
is this relevant? http://www.androidpolice.com/2013/0...o-find-5-android-4-3-nightlies-available-now/
and does it help in any way for this Rom's development?

Ramsey said:
Hey kasper_h,
is this relevant? http://www.androidpolice.com/2013/0...o-find-5-android-4-3-nightlies-available-now/
and does it help in any way for this Rom's development?
Click to expand...
Click to collapse
I think they made a break without compiling nightlys, but now they compile then again, its only relevant when you own N7-2 or Oppo 5.
Gesendet von meinem GT-I9000 mit Tapatalk 4

really waitin for this,thus downloadin now :beer:
Sent from my GT-I9000 using xda premium

supergeorg said:
I think they made a break without compiling nightlys, but now they compile then again, its only relevant when you own N7-2 or Oppo 5.
Gesendet von meinem GT-I9000 mit Tapatalk 4
Click to expand...
Click to collapse
In the comments section, one of the persons of AOKP says that it's not only for those devices but for many others.

compacity said:
really waitin for this,thus downloadin now :beer:
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Hey compacity, how is AOKP running? and did you try the Mackay ROM before this? if yes, which one is more stable and faster?

@Ramsey
If you like my opinion mackay cm is more stable plus cheries and interface and fast than infamous. I just reverted to mackay from aokp
Sent from my GT-I9000 using xda app-developers app

[Kernel][CM 11][ION+PMEM] KhaN Kernel 3.4.87 ( 16.04.2014 )

A kernel for CyanogenMod 11.0 ION/PMEM
FEATURES
*Kernel 3.4.87
*Build with Linaro GCC 4.7.4 2014.01 toolchain by Christopher83
*O3 Optimization
*Overclock up to 1.8 GHz
*CPU voltage control VDD sys interface
*Lowered display panel voltage
*Lowered wifi voltage
*Lowered vibetonz voltage
*Fixed 100% battery notification after charger unplug
*Fast Charge support
*Battery Life eXtender support
*Increase audio loudness
*Increased cpu freq.on boot
*Con Kolivas' CK3 Tweaks
*Fast Random generator (frandom) support
*Dynamic management of dirty page writebacks
*Dynamic management of the minimal slack
*Dynamic file sync
*Dynamic read-ahead
*LowMemoryKiller management of not killable processes
*Lowered swappines
*Stock Ram/362Mb Ram
*Governers : adaptive, conservative, lulzactive, interactive, interactiveX, ondemand, ondemandX, powersave, smartassV2, lionheart, performance
*I/O schedulers : noop, vr, sio, row, cfq, bfq, fiops
INSTALLATION GUIDE
Reboot To Recovery Mode
Flash the kernel
Wipe Cache & Dalvik Cache
Reboot System
CREDITS
arco68
Christopher83
educk
madridii
arsradu
sir mordred
and all github users for their commits
<< DOWNLOAD 362MB RAM >> Compatible with latest CyanogenMod 11.0 (20140413-UNOFFICIAL)
<< DOWNLOAD STOCK RAM >> Compatible with latest CyanogenMod 11.0 (20140413-UNOFFICIAL)
Old Versions :
<< DOWNLOAD >>
Code:
You can use [URL="http://forum.xda-developers.com/showthread.php?t=2401988"][COLOR="DeepSkyBlue"][U]Performance Control[/U][/COLOR][/URL] to edit all features.
CHANGELOG:
v1.1
-Sync with arco's latest changes (Adjust memory allocations again )
v1.2
-Sync with arco's latest changes
-removed 61 Mhz and 518 Mhz
-fixed sound lag in lulzactive
v1.3
-Sync with arco's latest changes
-Build with Linaro GCC 4.8.3 2013.12 toolchain by Christopher83
v1.4
-Sync with arco's latest changes
-USB OTG and zRAM fixes (credits Christopher83)
-Revised memory allocations.Stock ram and 361Mb of ram.
v1.5
-Kernel 3.4.82
-see my github
v1.6
-Sync with arco's latest changes
v1.7
-Kernel 3.4.83
v1.8
-Kernel 3.4.84
v1.9
-Kernel 3.4.85
-Fixed backlight not turning off when charging phone closed
-Enabled memutils '' gives better performance '' ( Thanks to sir mordred )
v2.0
-Sync with arco's latest changes
-Kernel 3.4.87
Click to expand...
Click to collapse
XDA:DevDB Information
[Kernel][CM 11][ION+PMEM] KhaN Kernel 3.4.87 ( 16.04.2014 ), a Kernel for the Samsung Galaxy W I8150
Contributors
lafactorial
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: v2.0
Beta Release Date: 2014-04-16
Created 2014-01-01
Last Updated 2014-04-16

Cool, another CM11 kernel!
Sent from my GT-I8150 using XDA Premium 4 mobile app

wow new kernel :good:
great job bro
----

Good Job Buddy......
Sent from my GT-I8150 using XDA Premium 4 mobile app

Thanks, now we have more RAM on 4.4.2.. :thumb:
Sent from my GT-I8150 using Tapatalk 2

i flash the swapped version. but it's not swapped at all.

4.4.2 Kernel
My brother lafactorial
Great work.
Success and ease.Continuous steps forward.
Very thanks

ghost141 said:
i flash the swapped version. but it's not swapped at all.
Click to expand...
Click to collapse
Sorry my mistake.Tested and uploaded again.

flash the swapped version, and yeah! calender keep crashing -_-''

ghost141 said:
flash the swapped version, and yeah! calender keep crashing -_-''
Click to expand...
Click to collapse
I have no problem at all. Try to clear cache of the app.

swapped storage perfectly
Rom Kk Bean Kat v.4
Dalvic runtime
thanks :good:

I realized one thing when I swapped memory. When I transfering some apps to sd card, it transfered to external SD instead (the 1.70gb one), not to the swapped one (my 32gb). Not like on the jellybean. How to do this?
- XDA ROCKS -

@lafactorial
Thank you dude,
I have just flashed your kernel, I have to test it for a meaningful time to realize its performance, and will give feedbacks here... )
Sent from my GT-I8150 using XDA Premium 4 mobile app

Can we flash swapped version of this on lastest arco's CM11 release?(1/1/2014)

xlollomanx said:
Can we flash swapped version of this on lastest arco's CM11 release?(1/1/2014)
Click to expand...
Click to collapse
You will have camera problems if you flash.
Sent from my GT-I8150 using XDA Premium 4 mobile app

lafactorial said:
You will have camera problems if you flash.
Sent from my GT-I8150 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ok thanks, I' ll wait for an update

In a short time, the great work.
More and more forward.
Thanks my brother.

ali7557 said:
In a short time, the great work.
More and more forward.
Thanks my brother.
Click to expand...
Click to collapse
You are welcome. I am trying to learn.

I download, and I use it. and working perfect, no problem so far. thaaaaaaaaaaaaanks

Update
Updated to new version for CyanogenMod 11.0 (20140101).

[KERNEL] Wind Kernel - r2 [4.4.128][UV][UC]

Hi everyone, I would like to share my personal u11+ kernel here. I am an amateur and love to cook kernel (previously >LG Nitro HD Wind kernel) for my own daily device.
OFC, Performance, Battery life and Stability aimed.
Hopefully you enjoy!
Changelog
r2
undervolted & lower freq step [email protected],[email protected] (credit: freak07)
add kcal supported
add wq_power_efficient toggle & on by default (credit: matthewdalex)
add fsync toggle & off by default (credit: franciscofranco)
updated cfq i/o scheduler & set it to default
linux v4.4.128
removed some unused drivers in defconfig
misc patches added & reverted some patches/tweaks in r1
r1
base: u11+ tw 1.05.709.12
merged: u11 tw 2.42.709.1_R2
upstream: Linux v4.4.78 -> v4.4.126
lowmemorykiller commits for managing free ram properly
i/o scheduler: maple
tcp: westwood
power-efficient workqueues
boeffla's generic wakelock blocker
misc patches/hacks for responsiveness and battery, view commits for detail
>download here<
Installation
save in external sd
flash via TWRP
optional: backup boot partition
>source<
Credit
nathanchance - linux upstream conflict fixes
tbalden - verity patch
boeffla - generic wakelock blocker
osm0sis - anykernel2
and developers sharing their source
XDA:DevDB Information
Wind Kernel, Kernel for the HTC U11+
Contributors
lyfkevin
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: r2
Beta Release Date: 2018-04-06
Created 2018-04-06
Last Updated 2018-04-06

Which security update is this on?

bosmon said:
Which security update is this on?
Click to expand...
Click to collapse
Stock one. I didnt touch it yet.
I hope doing these progressively. I found difficult to debug if adding massive features or patches at once.

This is stable .
Thank you.

newyesor said:
This is stable .
Thank you.
Click to expand...
Click to collapse
Glad to hear. Feedback are welcome.

r2 is released!
undervolted & lower freq step [email protected],[email protected] (credit: freak07)
add kcal supported
add wq_power_efficient toggle & on by default (credit: matthewdalex)
add fsync toggle & off by default (credit: franciscofranco)
updated cfq i/o scheduler & set it to default
linux v4.4.128
removed some unused drivers in defconfig
misc patches added & reverted some patches/tweaks in r1

lyfkevin said:
r2 is released!
undervolted & lower freq step [email protected],[email protected] (credit: freak07)
add kcal supported
add wq_power_efficient toggle & on by default (credit: matthewdalex)
add fsync toggle & off by default (credit: franciscofranco)
updated cfq i/o scheduler & set it to default
linux v4.4.128
removed some unused drivers in defconfig
misc patches added & reverted some patches/tweaks in r1
Click to expand...
Click to collapse
HI mate, thank's for you work...please would tell me how make it work kcal ?....everytime i tried open the app just close. Thnak's

neofrost37 said:
HI mate, thank's for you work...please would tell me how make it work kcal ?....everytime i tried open the app just close. Thnak's
Click to expand...
Click to collapse
Which app are u using?
You may use Kernel Adiutor, EX Kernel Manager
Personally I am using Ex Kernel Manager.

@lyfkevin
This kernel camera can't be opened. Did you find this a problem?

poppy22 said:
@lyfkevin
This kernel camera can't be opened. Did you find this a problem?
Click to expand...
Click to collapse
Camera should work fine in my released version.
You compiled from my github?
They are buggy in CAF-merged branches.
The stock rom is not fully capable with updated CAF patches.

lyfkevin said:
Camera should work fine in my released version.
You compiled from my github?
They are buggy in CAF-merged branches.
The stock rom is not fully capable with updated CAF patches.
Click to expand...
Click to collapse
Yes, I am the CAF version compiled from your GITHUB, but I can't work with your compiled brush into my mobile phone camera.

poppy22 said:
Yes, I am the CAF version compiled from your GITHUB, but I can't work with your compiled brush into my mobile phone camera.
Click to expand...
Click to collapse
You mean version r2? Any logcat.
Because camera works for me in either r1 and r2.
If you mean caf-branches in github, it's normal because they are still under testing.

lyfkevin said:
Which app are u using?
You may use Kernel Adiutor, EX Kernel Manager
Personally I am using Ex Kernel Manager.
Click to expand...
Click to collapse
Thank's for answer !!, i'm using kernel adiutor and let me play with some parameters of the screen, but i'm looking for more bright, so is possible to "overwrite" the settings to let the brightness go higher?