Develop Bugs

[Review] Seidio Innocase for Vibrant

So the first thing I noticed was that this is not a slider, but a front-and-back snap case. The product description says "Unique snap together design and opening slot makes putting on and removing your case easy" but for some reason thought it was a slider like the Surface II for the Captivate. So, it's not their fault I misunderstood.
Since the front bezel cover is so thin, my initial impression is that it seems a little flimsy. The back cover is also quite thin and has no lining like other Seidio cases. I think this was a conscious decision in order to keep the case as slim as possible. The fit is quite precise, so I don't think the lining would really make much difference as there is no movement within the case.
Although the front bezel piece seems flimsy at first, it feels quite sturdy once you snap it to the back cover. I do have some concerns the clips that snap together will wear down over time if you remove the cover frequently. Only time will tell on that point.
It has Seidio's "signature soft touch finish" which is like a somewhat rubberized matte texture. It's quite nice, but attracts prints if you have oily fingers.
Overall, the fit is pretty much perfect and the cutouts are precise. It's very thin and has a nice texture. Of the six cases I have, it's certainly the nicest. It does, however, cost about as much as the other five cases combined - $29.95.
At $19.95, I'd probably recommend it in a second. At $30 I have some reservations, namely the long term durability of the clasps that keep the two pieces together.

Vibrant case wont work

should be gettin mine tomorrow....
i think they have 6 month warranty which actually does work. thats another big plus with this company.

kolyan said:
i think they have 6 month warranty with actually does work.
Click to expand...
Click to collapse
Good to know. Hopefully won't have to use it.

Thanks for the review.
I'm still sticking to my white mesh case. I like really light and almost-not-there type of cases.

Thanks for the review, mine should be here within a day or so.
I ordered using the coupon code XMAS15 that was posted here. Not certain it's still valid though as the poster said it may expire on the 19th.
To the OP, how does the phone feel in your hands compared to what you had previously?
Also, did your volume buttons ever rattle? This is my only hesitation as the silicone case from t-mobile prevents the rattles I have from the volume rocker (which is loose).

s15274n said:
Thanks for the review, mine should be here within a day or so.
I ordered using the coupon code XMAS15 that was posted here. Not certain it's still valid though as the poster said it may expire on the 19th.
To the OP, how does the phone feel in your hands compared to what you had previously?
Also, did your volume buttons ever rattle? This is my only hesitation as the silicone case from t-mobile prevents the rattles I have from the volume rocker (which is loose).
Click to expand...
Click to collapse
For reference, I've had TPU's, hybrid TPU/Plastic (the one with hard clear back), a generic version of the Barely-There, and a flexible plastic perforated case (XMatrix Cover from DayDeal).
The added size and weight is similar to the XMatrix perforated case. It's not as slim as the Barely-There style cases, but I think it's definitely lower profile than TPU or silicone.
The finish is nearly the same as the Barely-There knock off I have, but seems a little more durable (the coating on the old case started to come off within days). It's smooth, almost suede-like, but has a bit of tack when held in the hand. When put on a smooth surface, like a desk or on wood trim in a car, it does not stick at all. This is a bit of a negative for me. One thing I like about TPU cases is that they kind of stick when you lay them on a smoother surface (I usually put my phone on the wood trim next to the gear shift in my car) but are not tacky otherwise.
As for the volume buttons, mine are not loose so I can't really comment on that issue.
One other thing I've noticed in the last few days of using the case, is that bezel cover is attached to the bottom part in only a few spots so there is some give in the areas that aren't clipped together. I think they should have added a couple more contact points on each side. It's not terrible, but I'm a bit OCD so it probably bothers me more than it would most other people.

I'll report back, should be here anytime now.. thanks man.

Case is good, very slim and feels good in hand, not perfect like other Seidio products. Like the review states, the case is NOT slide-on which sucks. I dont know why they used clip-on design, with slide-on case could have been even slimmer and more durable. Fit is also nice, but also not perfect, phone is just a little loose in case, not noticeable right away until you play with it.

kolyan said:
Case is good, very slim and feels good in hand, not perfect like other Seidio products. Like the review states, the case is NOT slide-on which sucks. I dont know why they used clip-on design, with slide-on case could have been even slimmer and more durable. Fit is also nice, but also not perfect, phone is just a little loose in case, not noticeable right away until you play with it.
Click to expand...
Click to collapse
After waiting around for the SGP Slider, I was also hoping this would be a sliding case.
I did get to hold a Captivate with the Innocase II, which is a slider, and the fit was pretty awful. It moves around a ton compared to this front-back type. I guess I'll take this style and more precise fit over slider with a bad fit.

Is it the bump on the Vibrant that is the main issue with a slider?
I was a bit let down to find this was a snap on the front/back design.

new coupon good through Sunday: MIX15
buy 2 products and get 15% off, free shipping for 2010

ordered one today from ebay for 18 and free shipping. thanks for the review and pics. Your pics make it look like it has a nice clean design in front.

djjeesh said:
ordered one today from ebay for 18 and free shipping. thanks for the review and pics. Your pics make it look like it has a nice clean design in front.
Click to expand...
Click to collapse
it is nice and clean. my nexus one case fits better, but they probably had to make it clip-on design i guess for Vibrant bump

Nice review! I can't help but feel like Seidio threw this product together in a hurry, after they realized there are people with Vibrants. It just looks cheap compare to their other offerings.

Just got it. initial impressions:
1 feels great in the hand. Looks good too.
2 I absolutely hate how easy it un-snaps.
3 I want to know their return policy till they have a legit case like the ones I am accustomed too from seidio.
4 it's much more difficult to press power now.
EDIT: okay, found out how to do the return, just waiting to hear back from them.

DIABLO Tough Rugged Dual Layer Protection Case Cover with Build in Stand for*

Finally a case with a kickstand.
http://pages.ebay.com/link/?nav=item.view&id=261651683480&alt=web

*Finally, a rugged case.

PowerLemons said:
*Finally, a rugged case.
Click to expand...
Click to collapse
Amen! Mine should arrive next week!

That is one ugly case and does not look comfortable to hold at all.

I had one for the note 3. It really wasn't that bad.

Crisisx1 said:
That is one ugly case and does not look comfortable to hold at all.
Click to expand...
Click to collapse
PowerLemons said:
*Finally, a rugged case.
Click to expand...
Click to collapse
If only they didn't have a stand, I would totally get it. I want a fully rugged case that doesn't feel tacky and about to fall apart like the TUDIA Dual.

Fugly case, it's a shame spigen refused to step up and produce a case.

disk0360 said:
Fugly case, it's a shame spigen refused to step up and produce a case.
Click to expand...
Click to collapse
Seriously.. I'm mad at them.
Or their ultra crystal screen protector. I love those.
Sent from my Nexus 4 using XDA Free mobile app

Ugly or not I'm looking for more protection and I have one of these on the way. I'll take some good pics for you guys when it comes. I got the red version.
Update: case came this morning. It's not as ugly as I thought, but it is a tad thick where the kickstand is. Good protection.. Better than my Ringke fusion and Tudia. I'm at work right now but will get some pics taken and posted later.

I agree. Who cares what it looks like: function > form. Let me know how it works out I may purchase one also.
Thanks

Ok here's the pics. I'm not happy with them but hopefully they will be good enough for you guys. I took them at work in a real hurry before my boss could appear and say "wtf are you doing?"
A few quick notes about the case:
-Good protection, higher edges around screen than my other cases.
-Power button feels pretty good but volume buttons are stiff and a bit mushy.
-Holes for the phone ports are of ample size.
-Case feels ok in my pocket but the thickness of the kickstand area IS noticeable even though I always have the screen side against my thigh.
-The kickstand is actually my first on any phone or tablet. It "locks" in the closed position with a snap. When trying to pull it out, it feels like it will break before it "snaps free" and folds out. Maybe it will, maybe it wont... I didn't buy the case for the kickstand anyway so I'm not worried about it.
Here's the pics.

Azlum said:
Ok here's the pics. I'm not happy with them but hopefully they will be good enough for you guys. I took them at work in a real hurry before my boss could appear and say "wtf are you doing?"
A few quick notes about the case:
-Good protection, higher edges around screen than my other cases.
-Power button feels pretty good but volume buttons are stiff and a bit mushy.
-Holes for the phone ports are of ample size.
-Case feels ok in my pocket but the thickness of the kickstand area IS noticeable even though I always have the screen side against my thigh.
-The kickstand is actually my first on any phone or tablet. It "locks" in the closed position with a snap. When trying to pull it out, it feels like it will break before it "snaps free" and folds out. Maybe it will, maybe it wont... I didn't buy the case for the kickstand anyway so I'm not worried about it.
Here's the pics.
Click to expand...
Click to collapse
Can you take a pic of the phone out of the case next to the case from the side, id like to see how thick it is compared to the phone.

Just ordered the white version, will come on standard shipping for around 7 days, no biggie while I wait for my TUDIA to arrive.
http://www.amazon.ca/JKase-DIABLO-R...&qid=1416026291&sr=8-4&keywords=jkase+oneplus

I had one of these on the RAZR i.
Not bad cases, can pop the rubber bit off and use just the hard shell.

Best hard cover Frosted Matte
Sended from china, 4 weeks wait, but very very good material !!
http://www.ebay.com/itm/Afan-Froste...t=US_Cell_Phone_PDA_Cases&hash=item27e8211eec

What are the differences between this two cases?
www.amazon.co.uk/gp/aw/d/B00P6TT6FK/ref=mp_s_a_1_1?qid=1416596545&sr=8-1&pi=AC_SY200_QL40
www.amazon.co.uk/gp/aw/d/B00P1T3HOQ/ref=mp_s_a_1_3?qid=1416596471&sr=8-3&pi=AC_SY200_QL40

akiscoolio said:
What are the differences between this two cases?
www.amazon.co.uk/gp/aw/d/B00P6TT6FK/ref=mp_s_a_1_1?qid=1416596545&sr=8-1&pi=AC_SY200_QL40
www.amazon.co.uk/gp/aw/d/B00P1T3HOQ/ref=mp_s_a_1_3?qid=1416596471&sr=8-3&pi=AC_SY200_QL40
Click to expand...
Click to collapse
Don't think cruzerlite has this case... Check their site.
Sent from my OnePlus One using Tapatalk VIP

i really hope other manufactures like spigen *cough* *Cough* support the opo, ive been using the nillkin snap one case and my opo fell from me a couple times and my bezel has taken the abuse : /

Threeoaks said:
i really hope other manufactures like spigen *cough* *Cough* support the opo, ive been using the nillkin snap one case and my opo fell from me a couple times and my bezel has taken the abuse : /
Click to expand...
Click to collapse
I don‘t think that manufacturers like spigen or otterbox will ever make cases for the opo they support devices that have more buyers like samsung or apple, anyway the most protective cases for opo are jkase diablo,diztronic ultra and tudia slimfit which do you prefer?

Awesome review.
tdamocles said:
I had one for the note 3. It really wasn't that bad.
Click to expand...
Click to collapse
that has got to be the best backhanded compliment i have ever heard. "wasn't that bad" I mean that is awesome. It's like saying, "well, the amputation went pretty well. He won't miss the limb at all."
I say this NOT sarcastically at all. I almost spit out what I was drinking because I was laughing so hard when I read this.

Poetic Affinity Case Review

Got my Poetic Affinity Case in today and figured I'd write a quick review. These poetic cases are very similar to UAG in looks and design but for 1/3 of the price. They are single peice hard poly carbonate and very ridged. Overall a nice design with a clear back to show off the beauty of your aluminum backed phone, offer a nice lip around screen for medium drop protection. My only issue is that the buttons are a little stiff but I suspect they will break in over time. I'm satisfied with my purchase and feel like it was a really good deal at around $10. It plays well with my spigen crystal screen protector and offers a good grip and feel in hand. If you guys have any questions feel free to ask. Sorry for the quality of the pics all I has was an s3 to take them.

how is the grip on it?
I had the Spigen Bumper Premium and it was still too slick for me..
Right now i have this case.. Zizo armor.. Super grippy.. but had to modify the power opening.. plus it squares off the phone and doesn't really show the HTC Beauty..

i got a Poetic Affinity case, it's a PIA to take it off if you want to, after the second time i took it off never put it on again, using Orzly FlexiCase now

codeglitch said:
i got a Poetic Affinity case, it's a PIA to take it off if you want to,
Click to expand...
Click to collapse
so other than it was hard to get off.. did you like the case? grip? feel? look?

Jaws4God said:
so other than it was hard to get off.. did you like the case? grip? feel? look?
Click to expand...
Click to collapse
in all honesty the case looks and feels good, great grip, my 2 issues with it was the taking it off because its harder "plastic", and the other issue was that the case doesn't exactly fit on top of the back of the phone, so it gets a lot of dust under there and you're gonna want to clean it.
If you can manage to take it off better than i could i would recommend the case, makes the phone a lite more bulkier but shouldn't be a problem, it wasn't for me.
I just got the Spigen rugged armor today, it's really great too, using it now!
IMO:
Poetic: good protection and good looks, still showing off your metal
Spigen Armor: good protection and good looks, no metal show off
Orzly crystal: not as good protection (thinner) but still good, and very transparent
Sorry for mentioning other cases on this thread but those are the 3 i got and i can give my opinion on

codeglitch said:
in all honesty the case looks and feels good, great grip, my 2 issues with it was the taking it off because its harder "plastic", and the other issue was that the case doesn't exactly fit on top of the back of the phone, so it gets a lot of dust under there and you're gonna want to clean it.
If you can manage to take it off better than i could i would recommend the case, makes the phone a lite more bulkier but shouldn't be a problem, it wasn't for me.
I just got the Spigen rugged armor today, it's really great too, using it now!
IMO:
Poetic: good protection and good looks, still showing off your metal
Spigen Armor: good protection and good looks, no metal show off [emoji14]
Orzly crystal: not as good protection (thinner) but still good, and very transparent
Sorry for mentioning other cases on this thread but those are the 3 i got and i can give my opinion on
Click to expand...
Click to collapse
no problem. i already ordered the poetic. looks like it should arrive monday.. just hoping its a great case for me.. im very picky lol
Sent from my HTC6545LVW using Tapatalk

well my case came today...
First Impressions:
Good:
1. Case feels premium.
2. Phone has great grip and texture.
3. Cutout for charger seems to be large enough for all my chargers, but will test more later.
4. Clear plastic is thick and doesn't have any tinting.
5. Cutouts for camera and speakers and mics seem perfect.
6. Buttons work great and have grip on them.
Bad:
1. Headphone cutout is small, should work for standard headphone plugs, but for a computer speaker plug in, it will not fit.. i may need to modify.
It will be interesting to see how the case does after a few days of testing... hopefully it will hold up as I really like the style and feel.
Thank you.

Shadows?
Came across this case the other day in my internet travels looking for something similar to my Supcase Unicorn Beetle Hybrid for my M8. The only case SC has for the 10 looks like a gawd damn brick. Ok for some, just not me. So, my question is, can anyone please confirm whether photos taken in this case cause any kind of blur, or shadow, from the cut out. I'm not talking about the known issues with lens flare here too, just to clarify. I've never owned a clear case but have heard of some that do cause a shadow (I am assuming a reflection from flash off the clear cut out).
Cheers.

Sc0ttyP said:
Came across this case the other day in my internet travels looking for something similar to my Supcase Unicorn Beetle Hybrid for my M8. The only case SC has for the 10 looks like a gawd damn brick. Ok for some, just not me. So, my question is, can anyone please confirm whether photos taken in this case cause any kind of blur, or shadow, from the cut out. I'm not talking about the known issues with lens flare here too, just to clarify. I've never owned a clear case but have heard of some that do cause a shadow (I am assuming a reflection from flash off the clear cut out).
Cheers.
Click to expand...
Click to collapse
since they are completely cut out, should not have any interference.
Sent from my HTC6545LVW using Tapatalk

Jaws4God said:
since they are completely cut out, should not have any interference.
Sent from my HTC6545LVW using Tapatalk
Click to expand...
Click to collapse
Ok. So, photos all good then?

Sc0ttyP said:
Ok. So, photos all good then?
Click to expand...
Click to collapse
yep, should be no issues..
see attached picture. cutout is d
clearly around camera, flash and Laser focus..
Sent from my HTC6545LVW using Tapatalk

Rightyo, and still thumbs up on the case?

Sc0ttyP said:
Rightyo, and still thumbs up on the case?
Click to expand...
Click to collapse
only complaint after 1 day use was the headphone plug too small for the larger plugs.. like for computer speakers.. so i used a round file and widened it..
so now its perfect.. great grip. love how it shows off the phone.. slim and shaped like phone.
Sent from my HTC6545LVW using Tapatalk

Jaws4God said:
only complaint after 1 day use was the headphone plug too small for the larger plugs ... slim and shaped like phone.
Click to expand...
Click to collapse
That's exactly what i'm looking for. Thanks for the replies J4G, and the review.

Hey man, I was just about to purchase from Amazon, thought i'd read through some of the reviews and some people are advising where the camera cut out is, the case sits up off the phone a little (i.e. not flush with phone), allowing debris in through the cut out. Looks flush from your last pic. Is this true?? I really don't mean to sound pedantic want to make sure I'm happy with case before I pull the trigger cause there's none to be found in Oz and I don't want to have screw around with returns.

Sc0ttyP said:
Hey man, I was just about to purchase from Amazon, thought i'd read through some of the reviews and some people are advising where the camera cut out is, the case sits up off the phone a little (i.e. not flush with phone), allowing debris in through the cut out. Looks flush from your last pic. Is this true?? I really don't mean to sound pedantic want to make sure I'm happy with case before I pull the trigger cause there's none to be found in Oz and I don't want to have screw around with returns.
Click to expand...
Click to collapse
from what i can see, that does appear true... I haven't seen much dust and debris get in there.. however i have only had it on a few days. :silly:
I will say that a lot of people said they are a pain to get off.. however I can attest that mine is like any other case.. it does hold on well, but just peel back a corner and then work on another corner, it pops right out.. so should be easy to clean..

Leather folio case with flip cover, like on Nexus 6P

I've been very happy with the case on my Nexus 6P (this looks like the one: https://www.ebay.com/i/131886281154?rt=nc&var=431231132500). Now having preordered XL2, I've been searching for similar case, but so far haven't found anything that would be close enough match. I went through the Cover thread, and closest ones were cases like this and this but there appears to be few essential differences:
The plastic bumper around looks a lot thinner on these XL2 cases
XL2 cases all have kickstand, which basically means the backside is not as thick/protective against drops
I don't need any CC slots (although having one isn't a show stopper)
Most of these XL2 cases look cheap at least in pictures
Even tried asking @madebygoogle on Twitter, but they didn't have any info on such cases. I'd happily pay that same (absurd) $50 or so for the case that I paid for this 6P case as it really is a premium case I've enjoyed using. Any tips are highly appreciated!

Try Case-mate
Sent from my Pixel 2 XL using Tapatalk

I'm in exactly the same boat...
Nexus 6p Flip case has been phenomenal and I'd like something similar for the Pixel 2 XL.
I'll try to remember to add to the thread, if I find something.

KL1 said:
I'm in exactly the same boat...
Nexus 6p Flip case has been phenomenal and I'd like something similar for the Pixel 2 XL.
I'll try to remember to add to the thread, if I find something.
Click to expand...
Click to collapse
Ditto. Does anyone know who manufactured the Nexus 6P folio?

From what I've found they were produced by adoptednyc.
They show no new items since iPhone 7.
Facebook is quiet too for them.

SOGA makes a really good flip case out of leather that works great.
Sent from my Pixel 2 XL using Tapatalk

jpalo said:
I've been very happy with the case on my Nexus 6P (this looks like the one: https://www.ebay.com/i/131886281154?rt=nc&var=431231132500). Now having preordered XL2, I've been searching for similar case, but so far haven't found anything that would be close enough match. I went through the Cover thread, and closest ones were cases like this and this but there appears to be few essential differences:
The plastic bumper around looks a lot thinner on these XL2 cases
XL2 cases all have kickstand, which basically means the backside is not as thick/protective against drops
I don't need any CC slots (although having one isn't a show stopper)
Most of these XL2 cases look cheap at least in pictures
Even tried asking @madebygoogle on Twitter, but they didn't have any info on such cases. I'd happily pay that same (absurd) $50 or so for the case that I paid for this 6P case as it really is a premium case I've enjoyed using. Any tips are highly appreciated!
Click to expand...
Click to collapse
Tetded leather cases. Very nice. Bit expensive though.
https://www.tetded.com/home/en/501-pixel-2-xl

stumpy352 said:
Tetded leather cases. Very nice. Bit expensive though.
Click to expand...
Click to collapse
I ordered 2 of these(2XL & 2).
Will report my assessment of them when they arrive.
Will likely take weeks, coming from China.

I prefer a flip case because of the added protection for the screen.
Also when I hold the phone in portrait mode I tend to use the flipped cover a secure holding grip.
The main downside is when taking a picture the cover gets in the way if I'm too hurried to get a picture.
I ordered the natural leather finished flip case without the strap or clasps from Tedded.
Looks to be of nice quality whereas it's real leather and not the plastic leather most cases use.
Where do the plastics cows come from? Do you feed them plastic packing peanuts?

kdkinc said:
I prefer a flip case because of the added protection for the screen.
Also when I hold the phone in portrait mode I tend to use the flipped cover a secure holding grip.
The main downside is when taking a picture the cover gets in the way if I'm too hurried to get a picture.
I ordered the natural leather finished flip case without the strap or clasps from Tedded.
Looks to be of nice quality whereas it's real leather and not the plastic leather most cases use.
Where do the plastics cows come from? Do you feed them plastic packing peanuts?
Click to expand...
Click to collapse
[email protected] peanuts
Sent from my Pixel 2 XL

KL1 said:
I ordered 2 of these(2XL & 2).
Will report my assessment of them when they arrive.
Will likely take weeks, coming from China.
Click to expand...
Click to collapse
So I received the cases today.
If the Nexus 6p official case was a 10, I'd give these Tetded cases an 8 or 8.5.
The hinge part of the flip cover seems a little flimsy, not in quality but in strength.
This causes the cover to wiggle or sit a little crooked at times. It isn't bad but not perfect.
The only other thing I'd change, if I could, would be to add a bevel to the area around the fingerprint sensor. Having a beveled surface makes it seem less deep when it guides your finger to the sensor. The hole on this case is is good, but again, not perfect.
All cutouts are properly placed, so no issues there.
All in all, I'd recommend this case to anyone who liked the official Nexus 6p case.

KL1 said:
So I received the cases today.
If the Nexus 6p official case was a 10, I'd give these Tetded cases an 8 or 8.5.
The hinge part of the flip cover seems a little flimsy, not in quality but in strength.
This causes the cover to wiggle or sit a little crooked at times. It isn't bad but not perfect.
The only other thing I'd change, if I could, would be to add a bevel to the area around the fingerprint sensor. Having a beveled surface makes it seem less deep when it guides your finger to the sensor. The hole on this case is is good, but again, not perfect.
All cutouts are properly placed, so no issues there.
All in all, I'd recommend this case to anyone who liked the official Nexus 6p case.
Click to expand...
Click to collapse
Awesome, thanks for the review! Do you have any photos you can share? Also, where did you order them from? Thanks!

dancole42 said:
Awesome, thanks for the review! Do you have any photos you can share? Also, where did you order them from? Thanks!
Click to expand...
Click to collapse
Ordered straight from tetded.com
The photos on the site are spot on.
I got the case without a strap or clasp.

Case mate has their leather folio case up for sale now.
Had one for my Pixel XL, loved it!
Can't wait to get this one!
Sent from my Pixel 2 XL

TETDED
Just received my flip case from Tetded.
If you desire a case that wasn't made from last months recycled Coke or Pepsi bottle this is the one to purchase.
I bought the flip case without the latch, the classic vintage brown version. It has the feel of fine leather, not something made from camel scrotum. The cover does interact with the screen as it should.
Access to the side buttons is good the fingerprint sensor is recessed a bit but access is also good.
The only downside at the moment is I use a magnetic phone holder in my vehicle that requires a very thin steel plate be applied to the inside of the front cover I usually use a credit card slot of which there are none. Tomorrows project.
the case is pricey but so wasn't the phone now to find a glass screen protector that doesn't have issues.
Don't ask for "pics" friggen Google Tetded.

KL1 said:
So I received the cases today.
If the Nexus 6p official case was a 10, I'd give these Tetded cases an 8 or 8.5.
The hinge part of the flip cover seems a little flimsy, not in quality but in strength.
This causes the cover to wiggle or sit a little crooked at times. It isn't bad but not perfect.
The only other thing I'd change, if I could, would be to add a bevel to the area around the fingerprint sensor. Having a beveled surface makes it seem less deep when it guides your finger to the sensor. The hole on this case is is good, but again, not perfect.
All cutouts are properly placed, so no issues there.
All in all, I'd recommend this case to anyone who liked the official Nexus 6p case.
Click to expand...
Click to collapse
Thanks for pointing out the Tetded cases. I looked and found they are now being sold on Amazon. Mine arrived today. Happy with it.

KL1 said:
So I received the cases today.
If the Nexus 6p official case was a 10, I'd give these Tetded cases an 8 or 8.5.
The hinge part of the flip cover seems a little flimsy, not in quality but in strength.
This causes the cover to wiggle or sit a little crooked at times. It isn't bad but not perfect.
The only other thing I'd change, if I could, would be to add a bevel to the area around the fingerprint sensor. Having a beveled surface makes it seem less deep when it guides your finger to the sensor. The hole on this case is is good, but again, not perfect.
All cutouts are properly placed, so no issues there.
All in all, I'd recommend this case to anyone who liked the official Nexus 6p case.
Click to expand...
Click to collapse
I know this is an old thread, but I'm in the same boat. One question for anyone that has the TetDed folio case. 1) How's it holding up a few months down the road? and 2) does the cover hold shut via magnet? Or is it just floppy? Thanks in advance to anyone still monitoring this.

mardanny said:
I know this is an old thread, but I'm in the same boat. One question for anyone that has the TetDed folio case. 1) How's it holding up a few months down the road? and 2) does the cover hold shut via magnet? Or is it just floppy? Thanks in advance to anyone still monitoring this.
Click to expand...
Click to collapse
Mine is holding up great, but I'm the type that doesn't have the cover open a lot.
My wife's is not holding up as well cause she is constantly on the phone.
The wear & tear that bothers me about hers is that the cover doesn't rest properly when closed now. it wants to sit crooked by default, resulting in me having to adjust it whenever I see it.
Overall, I think they are still a good option for folio covers, just not nearly as perfect as the Nexus 6p cover.

thanks for taking a chance and for reviewing the leather case.
kdkinc said:
now to find a glass screen protector that doesn't have issues.
Click to expand...
Click to collapse
can you recommend one of these? just received my xl2 last week. (i shattered my oneplus3 2 weeks after receiving it, so i'm trying to be proactive

leather case for HTC U11+ anyone?

Can somebody please manufacture a high quality leather case for the HTC U11+ ?
I can't find one online. Does it even exist yet?
Please let me know if you find a good leather case for it.
Thank you.
The case should offer enough protection while at the same time supporting the edge sense feature.

I used the included Clear plastic case, AND then purchased a high quality leather case from Piel Frama which has a pull tab.
The IPhone 7 plus case is a perfect fit for the U11+ with the included clear case.
I don't think that there will be many cases for this device as the U12 is 6 months away.

globalgpj said:
I used the included Clear plastic case, AND then purchased a high quality leather case from Piel Frama which has a pull tab.
The IPhone 7 plus case is a perfect fit for the U11+ with the included clear case.
I don't think that there will be many cases for this device as the U12 is 6 months away.
Click to expand...
Click to collapse
can you show some picture about your leather case?

See attached photos.
Fits like a glove !

globalgpj said:
See attached photos.
Fits like a glove !
Click to expand...
Click to collapse
Great how much does it cost ?
what screen protection do you use (link please)?

See link below.
Hands down, Piel Frama makes the best quality leather cases in the world.
https://www.pielframa.com/en/producto/iphone-7-plus-cases/pull-style
There are a lot of colours and a couple of textures available.
I haven't used screen protectors for years. Not necessary if you use a pouch/case for protection.

globalgpj said:
See link below.
Hands down, Piel Frama makes the best quality leather cases in the world.
https://www.pielframa.com/en/producto/iphone-7-plus-cases/pull-style
There are a lot of colours and a couple of textures available.
I haven't used screen protectors for years. Not necessary if you use a pouch/case for protection.
Click to expand...
Click to collapse
thanks

There are 4 small holes on the bottom right of the pouch. This allows for the speaker notification sounds to come through easily when the phone is in the pouch. Very clever. Perfect for this device.

This is one of the many problems with the leather cases on amazon. The product images are clearly fake.

I found this online,
https://www.casefanatic.com/htc/bus...r-cover-oneplus-5-oneplus-5t-htc-u11-htc-u11/
Have no idea about the quality but it looks good to my eyes :fingers-crossed:
Edit: The exact same case as above is available in aliexpress for half the price.
Edit: I found one more https://www.noreve.com/en/u11/3475-htc-u11-leather-cover.html
The above link is for U11 but they are currently in the process for making it for U11+ as well. Expensive but looks very high quality.

http://bit.ly/2CnzvQe

frevell said:
http://bit.ly/2CnzvQe
Click to expand...
Click to collapse
Looks good but where is that magnetic thing to close the case?
Also how does the phone sit inside the case? I don't see a silicone cover glued inside the leather case...
Please show more pics of it.
Does it provide sufficient protection for the edges of the phone?
Are all buttons easily accessible?

lebigmac said:
Looks good but where is that magnetic thing to close the case?
Also how does the phone sit inside the case? I don't see a silicone cover glued inside the leather case...
Please show more pics of it.
Does it provide sufficient protection for the edges of the phone?
Are all buttons easily accessible?
Click to expand...
Click to collapse
I received it today (1-9) . Cannot find a magnet. So it will not close by itself. Inside there is a glued cover (plastic) Fits, nice. All buttons are accessible and all the microphones are accessible too. Smells like real leather. Nicely wrapped in a box and bubble plastic.

Noreve has 3 models available now for pre-order, I ordered one (back cover only), should get it by the end of the month...

frevell said:
I received it today (1-9) . Cannot find a magnet. So it will not close by itself. Inside there is a glued cover (plastic) Fits, nice. All buttons are accessible and all the microphones are accessible too. Smells like real leather. Nicely wrapped in a box and bubble plastic.
Click to expand...
Click to collapse
I also got the same a few days ago. https://goo.gl/9t2V3u
It is of a very good qualtity and smells like real leather. The top cover attatch to the bottom with a magnet. If it don't you have to bend the top cover to back and front a few times because the new leather is stiff. After that mine attach to the bottom without any problem.
But, the opening to the volume and power -button is too small for me. You need small fingertips or use your nail to reach them. Its also missing an opening for the led at the top so I can't see it when charging or messages has arrived. Also it is very hard to use the fingerprint scanner if you don't have small fingertips. I have inform the seller/company about this and they will probably fix i in the next batch, they say.
As I said the quality is very good, exept what I have mentioned but maybe a bit overdone. With this case the package feels very thick, with the plastic bed for the phone and quite thick leather on top of that again. Solid, looks very exclusive no doubt, but to mutch I think.

fasst said:
I also got the same a few days ago. https://goo.gl/9t2V3u
It is of a very good qualtity and smells like real leather. The top cover attatch to the bottom with a magnet. If it don't you have to bend the top cover to back and front a few times because the new leather is stiff. After that mine attach to the bottom without any problem.
But, the opening to the volume and power -button is too small for me. You need small fingertips or use your nail to reach them. Its also missing an opening for the led at the top so I can't see it when charging or messages has arrived. Also it is very hard to use the fingerprint scanner if you don't have small fingertips. I have inform the seller/company about this and they will probably fix i in the next batch, they say.
As I said the quality is very good, exept what I have mentioned but maybe a bit overdone. With this case the package feels very thick, with the plastic bed for the phone and quite thick leather on top of that again. Solid, looks very exclusive no doubt, but to mutch I think.
Click to expand...
Click to collapse
I got a new leather case today. https://goo.gl/ea8Jr4
It feels lighter and not so compact/heavy as the earlier mentioned case.
But this case as the earlier one is missing a hole/opening for the charger/message-LED. It seems that companies who make this leather cases is missing this. The LED is not visible on the phone until it lights up. On the first case I made a hole for it but on this one, if I make one, it will destroy one of the vertial seam.

fasst said:
I also got the same a few days ago. https://goo.gl/9t2V3u
It is of a very good qualtity and smells like real leather. The top cover attatch to the bottom with a magnet. If it don't you have to bend the top cover to back and front a few times because the new leather is stiff. After that mine attach to the bottom without any problem.
Click to expand...
Click to collapse
You are right. After a few days of use I noticed there is a magnet. Sorry.

Received my noreve case, I got the synthetic leather one, back only ( there was a discount going on at the time, got it for 29€). Took about 20 days for delivery.
First impression is very positive, on first sight feels like really high quality, the synthetic leather seems to be of a high quality kind, fits perfectly... exept two things, one I knew about, the other one, I could live with.
First is the big cut outs for the squeeze feature, they look kinda ugly and we know that this feature works with most cases anyway... Thats why I got the black case to minimize this cutout...but still, not good.
Second thing is that the back mic cutout is not centered, mind you it doesn’t cover the mic, but just barely.
So in its current state, I wouldn’t buy it again, but having started a mail exchange with them, as it is a handmade on order brand, I think I will be able to place a special order without the cutout and with the mic hole centered correctly...
Will let you know how it goes...

Ok so my last update on the noreve case, I decided to return the one I got, didn't look good with the big cutouts for the squeeze feature...
Also they couldn't accomodate my idea for a case without these cutouts, as it would have been too expensive and too difficult for a one off case...
Back to square one, did not find a really nice case yet...

ziplepingouin said:
Ok so my last update on the noreve case, I decided to return the one I got, didn't look good with the big cutouts for the squeeze feature...
Also they couldn't accomodate my idea for a case without these cutouts, as it would have been too expensive and too difficult for a one off case...
Back to square one, did not find a really nice case yet...
Click to expand...
Click to collapse
As I see the issue isn't in the case ...
sent from my translucent black hTc