Having an issue with no sound emitting from any audio output on the phone, but sound will play through Bluetooth-connected device. No sound from front speaker (phone calls, dial pad), no sound from rear speaker (notifications, ringer, alarm, media) and no sound from wired earpiece/headphones. Seems like it's stuck in Bluetooth/headset mode, but turning off Bluetooth doesn't restore sound. Problem is intermittent, haven't determined pattern to the behavior.
Phone was rooted long ago but kept stock ROM. Flashed Paranoid Android 3.99 RC2 about a month ago, and problem seems to have started shortly thereafter, but not sure if related. Haven't tried to reflash.
Any suggestions? Tried searches, but didn't locate this specific issue.
SGH-T999 (US/T-Mobile Galaxy S3)
Is it a T999 or a T959? And flash back to stock.using Odin. If it still is a problem it's likely hardware related.
Sent from my SGH-T999 using Tapatalk
Sorry, phone is T999.....got rid of the T959 long ago, but must have been stuck in my head.
Will reflash this weekend and hope the sound issue is resolved. Thanks.
yardsale said:
Sorry, phone is T999.....got rid of the T959 long ago, but must have been stuck in my head.
Will reflash this weekend and hope the sound issue is resolved. Thanks.
Click to expand...
Click to collapse
Did some more investigating last weekend before flashing ROM (never did the reflash).....seems that often, not always, if I turn off the car ('13 VW) while still connected to phone Bluetooth, the phone's sound quits working (all sound). Rebooting phone and turning off Bluetooth does not restore sound. The only solution I've found is to reconnect to car's Bluetooth, then turn Bluetooth off before shutting down car, and that only works about half the time, but sound is instantly restored. My estimation is that this wouldn't be hardware related, is that a fair assumption?
I also have a Tasker profile set up on phone to disable PIN lock when phone is connected to Bluetooth device (enables Sena Bluetooth headset used with motorcycle helmet to function properly), could that be causing the problem? Anyone else experience this issue?
Please try another Rom. Some of the Custom Roms may not be uptodate with CM Checkins. This issue was reported a bit back. There were CM Code Fixes that may not have been incorporated in that rom.
I am using Slimbean 2.0 (Android 4.3.1) and have seriously tested its bluetooth capabilities.
its also been reported thst msny car manufacturers did not bother to put any time or money into their BT capable systems. they just threw it together so they could add to feature lists.
Lots of peopke have problems with BT in the car, especially on cm roms. but those are notorious for BT issues to begin with.
Sent from my T-Mobile MyTouch 3G Slide(HTC Espresso) using Tapatalk 2
Thanks for the replies. I flashed to Paranoid Android 3.99.1 RC1 but the problem still exists. I never had this issue with any of our vehicles, until switching to PA from stock ROM. If problem becomes unbearable, may go back to stock. Thanks again.
@yardsale
I should have mentioned in the previously. Please read this post of mine. Yes its a different Rom. However, here primarily the issue is that of hardware antenna of the T999 talking to the Car's antenna. Doc is 100 % correct, the manufacturers do use substandard Antenna. On that thread, someone else reported issues with two '13 VW for themselves and their brother's.
Related
I've used many ROMs (Viper, Bonsai, Nebula, currently ACS Syndicate) and I've had this problem on all of them. I've even ODIN'd back to stock before and it still didn't fix my problem.
After disconnecting my Epic from my Jawbone Icon headset, the sound often gets stuck inside the earpiece. Music, movies, games, ringtones will all play from the earpiece instead of the speaker behind the phone.
Is there some software fix to correct this? Can any of the devs point me in the right direction as to how I might troubleshoot this (maybe at the kernel level)?
Thanks in advance!
This doesn't really go in Development, and I suspect it will be moved soon.
I can tell you, though, that I've experienced similar problems, intermittantly, and here's what I've observed.
If I'm listening to music through bluetooth, before I disconnect, I'll stop the music. Then I'll turn the bluetooth device off. Then I'll turn bluetooth off on the phone. If I do it in that order, I don't seem to get the bug.
If you do still get the bug, rebooting fixes it.
Hope that helps!
This is a known issue. It's a bug that has to do with being connected to a device for both media and phone calls. If you use only one or the other it doesn't happen.
Sent from my SPH-D700 using Tapatalk
mattallica76 said:
This is a known issue. It's a bug that has to do with being connected to a device for both media and phone calls. If you use only one or the other it doesn't happen.
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
It's very annoying for me as well.
The other bug that I noticed is after taking a call over BT, when I end the call, the earpiece on the phone starts randomly popping. rebooting fixes it but it still really irks me.
I think the OP is wondering if there's a way to dig around in the BT stack and fix it ?
daddymikey1975 said:
It's very annoying for me as well.
The other bug that I noticed is after taking a call over BT, when I end the call, the earpiece on the phone starts randomly popping. rebooting fixes it but it still really irks me.
I think the OP is wondering if there's a way to dig around in the BT stack and fix it ?
Click to expand...
Click to collapse
This stuff has been going on since DK28 and before. I believe Rodderick was looking into fixing it from the kernel side, but I'm not sure how much progress has been made. I know it's not as bad as it was on DK28, but still very annoying. It used to happen to me all the time (audio going through earpiece instead of speaker after disconnecting Bluetooth) when I would turn my car off and it would disconnect the Bluetooth to my car stereo. Now that I have the Samsung Car Dock, I just connect Bluetooth for phone only, and use the audio out on the Car Dock for Navigation and Media.
Moved to Q&A.
i am having a simular issue but mine is that when i connect to bluetooth headset i have to have media playing before i get a call or i will not hear the other person in the call.
it seems to me that ANY bluetooth headset with A2DP is doing this and i have tried 3 diffrent headsets. Jabra Stone, Jawbone Icon, and the Blueant T1.
all 3 of these headsets do this. does anyone have any solution yet?
Even if there isn't a fix, I wish there was an app to reset the sound settings post facto. Anyone know of one?
I just want to add my name to the list of those who are affected by this. Glad it's not just me, though. Hopefully it can be debugged easily.
For the record, a Quickboot Hot Reboot (reboot of Android only, not phone) does NOT solve the issue. Only a full reboot works for me. Seems like it may not be a software issue but something hardware-related.
Sent from my SPH-D700 using Tapatalk
Just want to add this happened to me the first time just now. I'm on rooted EC05. I was scared for a bit that the speaker had blown. Then when I discovered it all coming from the earpiece, I remembered this thread. A reboot did make it go away.
I wonder if it has any relation to the issue I see once in a while since the upgrade where my BT devices need re-pairing and ask for a passcode, when they really shouldn't.
I Also Have This Issue
I have had this exact issue since DI18.
After I hang up a Bluetooth call, I have popping sounds coming out of the earpiece. Turning off Bluetooth doesn't fix it. Turning Bluetooth back on after turning off doesn't fix it. In addition, after this happens, all devices sounds (phone ranging, notifications) all come through the earpiece and *not* the main speaker.
I've had all of the stock ROMs up until EC05 loaded on this Epic and have had the same issue throughout. I am now running midNIGHT ROM, which has cured most problems I’ve had with my device, except this issue.
I was just poking around trying to find some sort of tool or the name of the service(s) that I need to restart to fix this issue.
Same issue for me. Quite annoying as I listen to audible over bluetooth quite a bit, and then pretty much know I have to reboot when I turn bluetooth off.
SRF users have reported Bluetooth issues being cleared vs. stock builds. I can't say exactly why, but it does seem to work.
What are SRF users?
Nope...
Syndicate Rom Frozen...
Well, I'm on SRF 1.1.1 and I've got the same incredebly annoying audio issue.
Please, someone, come up with a fix!
Hey everyone. Gotta say, i love this phone its the android device i always wanted. However, im having issues with my car bluetooth which i have not experienced before... namely, that random phonecalls sound completely digitized.
Ive come from an htc desire and htc sensation on the same car without issue and am worried i got a bad BT antenna-or its software...
Anyone out there experiencing the same thing? Any advice (other than buying a new car)?
I am having the same issues on a Verizon Galaxy Nexus V4.02. If I turn bluetooth off mid-call the earpiece sounds fine. The static only happens during voice calls, streaming A2DP sounds fine. There are bluetooth improvements listed in the 4.03 changelog, hopefully this will be resolved.
I had some problems with my BT speaker phone. I turned off the key press sounds and the screen off sounds and that pretty much fixed it.
I have an off topic question for you guys that use bluetooth streaming. Can start the car and press play from the HU to start music? I can with my old D2, but not my TB. I have to actually start the music player on the thunderbolt, then I can control it from my HU. I would like to upgrade, but I don't see a huge advantage in upgrading if I still can't start my music without having to actually take the phone out of my pocket. (Yes, I know it's stupid, but I'm lazy.)
I have this same issue in one of my cars. I ran a number of tests and the issue only occurs on my vehicle when the phone is connected to both for telephony and a2dp music. The static occurs whether or not a2dp is actually being used to stream music or not. This particular vehicle has two separate devices for music and telephony. If I unpair or disconnect the music device, then telephony works without the audio distortion. As soon as I reconnect the music device, the static is re-introduced.
v0yeur said:
Hey everyone. Gotta say, i love this phone its the android device i always wanted. However, im having issues with my car bluetooth which i have not experienced before... namely, that random phonecalls sound completely digitized.
Ive come from an htc desire and htc sensation on the same car without issue and am worried i got a bad BT antenna-or its software...
Anyone out there experiencing the same thing? Any advice (other than buying a new car)?
Click to expand...
Click to collapse
I am experiencing this issue as well and have not been able to resolve it. I've tried disabling the touch sounds, screen off sounds, etc. but to no avail.
It pretty much makes handsfree unusable while driving. What have you guys done in the meantime? Have you been able to resolve the issue yet?
Here's my specific details:
Phone: Verizion LTE Galaxy Nexus v4.02 stock/unrooted
Handsfree Car System (phone audio): Stock 2007 Audi A4
Separate A2DP Module (media audio): Dension Gateway Five connected to factory Stereo
All of my previous phones (Thunderbolt, Droid X, Incredible, OG Droid) have fully supported this setup with no issues whatsoever.
On a sidenote, my A2DP streaming is also unreliable. It first has trouble connecting to the device. If/when it does, audio constantly cuts out when streaming Pandora, Slacker Radio, Google Music... pretty much any streaming over network connection. I have not tried locally stored music yet as I don't have any currently stored on my device. Are you guys experiencing this A2DP issue as well?
I wonder how widespread this is and if it warrants opening an official issue with Google.
I used to have a Blackberry Torch, and I have a Ford Mustang. When I would connect the BT to it, if the Wifi was on, it would "interfere" with the signal. Turning wifi off, fixed the issue. This was a widely known issue with the Torch. Granted that shouldn't have to be a fix, but can any of you verify whether your wifi is on? (regardless of if its connected to anything or not). I'm wondering if the Nexus is using the same BT/WIFI chip that the Torch used.
radi0chik said:
I used to have a Blackberry Torch, and I have a Ford Mustang. When I would connect the BT to it, if the Wifi was on, it would "interfere" with the signal. Turning wifi off, fixed the issue. This was a widely known issue with the Torch. Granted that shouldn't have to be a fix, but can any of you verify whether your wifi is on? (regardless of if its connected to anything or not). I'm wondering if the Nexus is using the same BT/WIFI chip that the Torch used.
Click to expand...
Click to collapse
I appreciate the suggestion but unfortunately, I have the issue even if WiFi is off (I never use WiFi).
I'm going to try and toggle a few of the sound and haptic feedback settings a little more to see if it's pertinent to a certain on/off configuration. It's a shot in the dark but I'll try anything at this point.
ok it was worth a shot. Maybe on a whim turn off 3g/data so basically its airplane mode except BT is on? Just to eliminate any RF interference. Other than that I dont know
Spent quite a bit of time in the car today to try and pinpoint a cause and I have had no luck.
Phone audio will sound great and then all of the sudden turn digitized and distorted for a random period of time, then revert back to sounding great. One thing to note is that the distortion is both ways - the person I'm talking to also hears it when I speak and cannot understand what I'm saying. It's very frustrating not being able to use this feature.
I am on my 2nd replacement phone and ALL of them have had this issue (returned two others to VZW due to this issue and the speaker clicking issue). I am still wondering if it is software/OS releated or if it's due to poor hardware.
Quick Update (kind of):
I messed around with more settings last night. I am happy to report that after I disabled NFC last night, I made several handsfree calls in my car with perfect clarity and no issues. Also, A2DP streaming Pandora worked flawlessly! I was happy that I thought I pinpointed the issue - NFC interference.
BUT this morning, I made a handfree call and it was immediately distorted. Frownie face! A2DP Streaming Pandora still worked great. I am now trying to determine if my success last night was a fluke or if something is different with the phone this morning. The only difference from last night to this morning, that I have been able to identify so far, is I now have the extended battery in the phone. Last night's success had the standard battery. I'll switch them back at lunch and re-test.
Stowegy said:
Quick Update (kind of):
I messed around with more settings last night. I am happy to report that after I disabled NFC last night, I made several handsfree calls in my car with perfect clarity and no issues. Also, A2DP streaming Pandora worked flawlessly! I was happy that I thought I pinpointed the issue - NFC interference.
BUT this morning, I made a handfree call and it was immediately distorted. Frownie face! A2DP Streaming Pandora still worked great. I am now trying to determine if my success last night was a fluke or if something is different with the phone this morning. The only difference from last night to this morning, that I have been able to identify so far, is I now have the extended battery in the phone. Last night's success had the standard battery. I'll switch them back at lunch and re-test.
Click to expand...
Click to collapse
I've got the same issue. Even with NFC disabled. Makes listening to Pandora in the car unbearable. I've gone through the same steps as you, but hasn't exchanged the phone yet. I've had previous Androids and it was a hit/miss with the distortion, but with an iPhone or BB never had this issue. Go figure.
thanks to all the replies, will update to 4.0.3 and try out some more options.
- unplugging my music dongle had no effect on call quality
- NFC on or off had no effect
I also find that the music adapter never auto-connects and needs me to go in to the BT settings page and manually select it.
thanks all.
Hello again. So I have an update that adds to the flakiness ...
Updated to the Bugless Beast ROM and Franco's kernel. My intent was to completely reset the phone and hopefully get a new Bluetooth stack in the process.
Initially everything paired OK, but after a while my audio randomly disconnects after about 20minutes and then reconnects depending on its mood.
My phone connection is more controllable now: if the BT is enabled on my phone when I turn on the car, the sound quality is entirely digitized and unusable. If I turn on the car and THEN enable my phone, the sound quality is flawless every time.
Still not ideal, but manageable. For the music audio part, I lay the blame entirely on the Audi Music Interface BT adapter: the thing is crap and always in pair mode even with the car turned off! The telephone BT in the car head unit has seen several phones pair with it without any issues (I do mobile development so I get to play with many phones) so in that case, I can't blame anything but the Nexus.
I really hope someone at Google or Samsung reads these threads since it would be tough to troubleshoot, but there's no doubt an issue exists with general BT compatibility.
Sent from my Galaxy Nexus using xda premium
Anyone have an update on this issue? Does anyone know of a ROM with a different Bluetooth stack than AOKP? I love everything else about AOKP. I have had the same garbled bluetooth audio from stock - 4.03 with franco and faux kernels with the same result. I had similar problems with Cyanogen 7 ROM I was using on my Incredible the week before I bought the Nexus.
Update - I experimented with a couple of additional devices, and the multiple connections problem with my Nexus is limited to A2DP only devices.
I am now using a Garmin BlueTrip with "phone audio" deselected in bluetooth options. As long as the additional bluetooth device is handsfree profile capable, the A2DP functions perfectly, calls are clear, and the device reconnects after a power cycle consistently. I'm glad this appears to be a software issue and not something we will have to live with for the life of the phone. I'm sure a future update will correct this issue.
I'm also having a problem with Bluetooth calls sounding very digitized and/or choppy. It is bad enough that it can be extremely difficult to make out what the caller is saying. A2DP, on the other hand, has performed pretty flawlessly and the device consistently reconnects each time I get in the car (although it can take up to 30 seconds or so).
I'll have to do a little experimenting with some of the settings mentioned in this thread to see if they have any affect.
On a related note, I feel like sometimes calls made/recieved on the handset can sound digitized as well (although not nearly as bad as over bluetooth). Has anyone else experienced this?
My hardware is:
Verizon GNex (4.0.2)
Parrot MKi9000
There are a number of problems with bluetooth on the Galaxy Nexus. Some may be Galaxy Nexus specific, some may be Ice Cream Sandwich specific, I am not sure... Bluetooth performance has been very inconsistent since the launch of Android. (Well, actually it worked perfect in the early days of the G1, but more recent updates seem to make Bluetooth performance more inconsistent.) I would really like to see Google focus on fixing these Bluetooth issues, and I do not know of any way other than starring these issues on code.google.com to bring this to their attention. I have personally experienced the following issues:
1. Rogue phone call upon bluetooth headset connect. This one is very annoying: sometimes the phone will dial the last-called number when a bluetooth headset is connected. Please star this issue if you'd like it to get fixed: http://code.google.com/p/android/issues/detail?id=26004
2. Galaxy Nexus Bluetooth and BT-button become sometimes unresponsive, BT button blackend out (dark gray), needs restart to fix. If you have ever experienced this, you know what I am talking about: sometimes you have to reboot the phone to get it to connect to a bluetooth headset or car. Please star this issue if you'd like it to get fixed: http://code.google.com/p/android/issues/detail?id=24522
3. Apps other than "Music" not receiving Bluetooth Play/Pause commands after 4.0 update. I think this is the cause of apps such as Pandora not auto-pausing upon bluetooth disconnect. Please star this issue if you'd like it to get fixed: http://code.google.com/p/android/issues/detail?id=23172
These issues have a very low number of stars, and do not have an owner assigned to them yet. Please help improve bluetooth performance by voting for these issues. Thanks!
Strange...I'm on AOKP and I don't see any of these issues...
Are you on 4.0.3?
Number 3 is app specific. Those other apps need updates.
I had an issue similar to number 2 when my Nexus was on stock. On custom ROMS, my bluetooth works fine. Are you still on stock?
Sent from my cm_tenderloin using Tapatalk
bekyndnunwind said:
Strange...I'm on AOKP and I don't see any of these issues...
Are you on 4.0.3?
Click to expand...
Click to collapse
I am on stock 4.0.2 (rooted) on a GSM yakju. I've been waiting for a more feature-complete CM9 before switching ROMS, but if you say AOKP doesn't have these issues then I might just switch to AOKP and try it out in the next day or two!
Updated: Problem persists after installing ROM AOKP M4.
adrynalyne said:
Number 3 is app specific. Those other apps need updates.
Click to expand...
Click to collapse
Ahh - good to know, though it is weird that Pandora v 1.5.12 still auto-pauses on bluetooth disconnect.
Bluetooth
I haven't had any issues with my Jawbone bluetooth. I do noticed that different bluetooths work differently with different phones which a big history and swapping different phones and bluetooth headsets. I would try a different bluetooth.
mralexsays said:
Ahh - good to know, though it is weird that Pandora v 1.5.12 still auto-pauses on bluetooth disconnect.
Click to expand...
Click to collapse
I could be wrong.
mralexsays said:
There are a number of problems with bluetooth on the Galaxy Nexus. Some may be Galaxy Nexus specific, some may be Ice Cream Sandwich specific, I am not sure... Bluetooth performance has been very inconsistent since the launch of Android. (Well, actually it worked perfect in the early days of the G1, but more recent updates seem to make Bluetooth performance more inconsistent.) I would really like to see Google focus on fixing these Bluetooth issues, and I do not know of any way other than starring these issues on code.google.com to bring this to their attention. I have personally experienced the following issues:
2. Galaxy Nexus Bluetooth and BT-button become sometimes unresponsive, BT button blackend out (dark gray), needs restart to fix. If you have ever experienced this, you know what I am talking about: sometimes you have to reboot the phone to get it to connect to a bluetooth headset or car.
Click to expand...
Click to collapse
I get #2. Usually it occurs with turning bluetooth on and off multiple times over a period of days or coming out of Airplane mode. I have got around it by leaving bluetooth on all the time. I found that BT does not actually use a much battery.
bekyndnunwind said:
Strange...I'm on AOKP and I don't see any of these issues...
Are you on 4.0.3?
Click to expand...
Click to collapse
I just flashed AOKP, so I should know within a few days if 4.0.3 really solves these issues for me. Thanks!
mralexsays said:
I just flashed AOKP, so I should know within a few days if 4.0.3 really solves these issues for me. Thanks!
Click to expand...
Click to collapse
Whatever is causing these bluetooth issues for me wasn't solved by switching to the AOKP 4.0.3 ROM. Got in my car this morning and bluetooth would not connect - had to reboot my GN. Upon reboot, bluetooth connected and dialed the most recently dialed number. I can't imagine that an app would be causing this, but I'm going to try stripping down my installed apps to the bare minimum and see if that helps. My car bluetooth is a Motorola T605 that worked flawlessly from the original launch of the G1 up until sometime around the Gingerbread releases started coming out, so I don't think it's an issue with the T605 bluetooth unit. I'll keep this ticket updated as I learn more about the issue.
mralexsays said:
Whatever is causing these bluetooth issues for me wasn't solved by switching to the AOKP 4.0.3 ROM. Got in my car this morning and bluetooth would not connect - had to reboot my GN. Upon reboot, bluetooth connected and dialed the most recently dialed number. I can't imagine that an app would be causing this, but I'm going to try stripping down my installed apps to the bare minimum and see if that helps. My car bluetooth is a Motorola T605 that worked flawlessly from the original launch of the G1 up until sometime around the Gingerbread releases started coming out, so I don't think it's an issue with the T605 bluetooth unit. I'll keep this ticket updated as I learn more about the issue.
Click to expand...
Click to collapse
AOKP M4 + Parrot MKI 9200 2.0.2 working fine here.
Checked for firmware updates to the T605?
Sent from my Galaxy Nexus using Tapatalk
No issues here with stock 4.0.1 yakjuux when pairing with Jawbone ERA bluetooth headset. I've seen other posts about issues with pairing with car software tho
daern said:
AOKP M4 + Parrot MKI 9200 2.0.2 working fine here.
Checked for firmware updates to the T605?
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
I searched, but there is no update for the T605 - I doubt Motorola will ever release one either since the T605 is a very basic bluetooth device - only supports phone and A2DP media - pretty standard.
Would certainly appreciate support for avrcp 1.3/1.4 - my Parrot looks a little sad when doing A2DP as it just displays a little scrolly thing on the display - would be mucho cooler if it displayed track name / artist.
Would be /awesome/ if I could browse the device's media from the Parrot...
One of the apps I uninstalled was the Google "Car Home" app - I suspect that Car Home is what was causing both the "unable to turn on bluetooth" and the "bluetooth dials the most recently dialed number upon connect sometimes" issue. Not 100% sure yet, but seems plausible since Car Home ties in to bluetooth as a system app and I haven't had the issue since uninstalling Car Home. It'll take a few more trouble-free days for me to be sure though... Does anyone who use the Google Car Home app (which must be installed as a system app) NOT have this issue?
It's definitely a hardware or driver problem and does not come from an app. I have this issue since day 1 on my Nexus and I have experienced it on all ROM's I have tried or baked until now. I hope Google or Samsung will do something with our complains.
Planet X said:
It's definitely a hardware or driver problem and does not come from an app. I have this issue since day 1 on my Nexus and I have experienced it on all ROM's I have tried or baked until now. I hope Google or Samsung will do something with our complains.
Click to expand...
Click to collapse
I wonder why some people never see this issue while we do. Is there any other way to draw attention to the bluetooth issues besides starring these defects at code.google.com? Before I made this XDA posts, there were 42 stars for what I consider to be the most important defect (Issue ID 24522 - "Galaxy Nexus Bluetooth and BT-button become somtimes unresponsive, BT button blackend out (dark gray), needs restart to fix"), but as of today, there are still only 49 stars for that issue. That means that only a small fraction of us experience this issue or that not many people care about it.
Although I'm not having any of the problems you describe, I have always found BT on Android to be incredibly unreliable. But then, I have always believed that BT is an absolute joke, the best example of a failed standard in the history of the universe.
The problems I have had consistently with my G1, N1, and now GN:
- Paired headset simply won't connect. Have to reboot to fix. Doesn't happen too often.
- Headset connects, but only media or phone audio, not both. For me this is the most common and happens a LOT. Multiple power cycles on the headset will sometimes fix, but sometimes have to reboot phone.
- Headset connects and will control the phone and music player, but no audio. This happens with some regularity. Have to reboot phone.
Same problems with three brands of headset: Jawbone original, Plantronics Voyager 510, and currently the Moto S305.
I haven't searched the db to see if these bugs are reported. I just quietly despise BT and Google's failure to implement it better.
I don't have these problems with my iPod or iPad, so fully believe it's Google's poor implementation of a poor standard.
More power to you getting the issues addressed, but I think that since BT, which is truly a joke, and yet has been accepted and is widely used by the general public, they are not going to care. Google sets their pain threshold for system failures and bugs fairly high and does not trouble themselves at all with issues that don't rise to that level. For example, here in Puerto Rico where I live, Network Location Services stopped working on TMO a year ago and Google has not fixed it yet despite several solid reports. Until they receive a cacophony, they don't care, and they won't receive a cacophony on something like NLS, because the general public has no clue that it even exists, even though it impacts their daily experience with location aware apps. It's quite frustrating.
GR
GR,
I agree that bluetooth has its share of shortcomings, but basic phone and a2dp audio is something that has been around a long time and really should "just work." I like bluetooth in the fact that I can choose to keep my phone in my pocket and just hop in the car and it's connected for phone and media. A built-in service such as bluetooth should never get stuck in this unusable state that requires a reboot to get it working again. (Especially in the car - that really sucks...) I like the fact that Google is constantly adding new cutting edge features like NFC, but it seems that this comes at the cost of overall stability for some of the basics like bluetooth.
Hi everyone,
The bluetooth on my GSIII has been a complete failure. You can follow the saga here (http://www.benzworld.org/forums/w245-b-class/1662643-2009-w245-samsung-galaxy-s-iii.html), but basically it connects to my car and has no sound with the stock ROM and refuses to connect to the car at all with the AOKP JB build. It suggests an android problem, so I'm wondering if the bluetooth stack can be reloaded to reflashed with something different. If anyone has any ideas, I'm all ears. Thank you!
I have a problem with one of my Bluetooth devices dropping and reconnecting. Not sure why is just one. It works fine on an iPhone. I'm guessing your GS3 isn't the international version?
Sent from my SGH-I747M using xda premium
Nope not international, SGH-I747M from Bell.
I'm trying this. Will report back.
evilmonkey1987 said:
I'm trying this. Will report back.
Click to expand...
Click to collapse
Sweet! please let us know!
I'm having a different issue. it connects and stays connected, plays music but it doesn't list the song/artist info on my eclipse screen but the SG2 will..
Update: no change with the new kernel. The phones pairs but there's no sound, just as was the case before.
evilmonkey1987 said:
Update: no change with the new kernel. The phones pairs but there's no sound, just as was the case before.
Click to expand...
Click to collapse
Try CM9. Bluetooth works much better with it. CM10 should have it fixed as well in a day or two.
Here's a 'six months later' update. My phone went through various android updates and I'm now on Android 4.1.1 (up from 4.0.4). The problem was still not solved, but instead of no audio, I now have one way audio, where people hear me but I don't hear them through bluetooth. I have also gone through a number of custom ROMs and kernels for my phone (including CM9/10 and AOKP) and nothing helped with the issue.
A couple of days ago, my girlfriend's HTC One X (finally!) got its Android update, also from 4.0.4 to 4.1.1. Her phone now works like a charm with the in-car bluetooth.
The solution I ended up with was a car cradle and a couple of NFC tags to control my phone in the car. My NFC tag that's stuck to my car cradle turns off WiFi, starts car mode, starts a car home app and turns my volume to max. All I have to do after that is connect the 3.5mm audio cable and I use my phone in place of the car's infotainment system. That way the phone integrates into the car as well and the only thing I lose are the steering wheel controls (they still work for volume).
My less technologically inclined girlfriend now has everything work auto-magicallly with bluetooth. So I guess all's well that ends well, but to anyone considering a US-spec Galaxy S III, watch out: the bluetooth issue is still not fixed. If bluetooth is critical, consider the HTC One X (but be warned: it has awful battery life!)
I have no issues with stereo Bluetooth and mono Bluetooth. Everything and everyone hears and plays fine. It might be an issue with your headset.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
colbynmeghan said:
I have no issues with stereo Bluetooth and mono Bluetooth. Everything and everyone hears and plays fine. It might be an issue with your headset.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
Colby. What version of android, kernel / rom combo are you using?? There's SOOO many people having problems with JB and bluetooth, regardless of rom or kernel setup.
If you're on stock... just nm then.
luncht1me said:
Colby. What version of android, kernel / rom combo are you using?? There's SOOO many people having problems with JB and bluetooth, regardless of rom or kernel setup.
If you're on stock... just nm then.
Click to expand...
Click to collapse
What's wrong with stock? I have no major issues with streaming BT from my phone to my Mazda 3 head unit, or to my Sony MW600 earphones. Even track titles work (the only thing that doesn't work is time display). In my experience, Bluetooth works best on the stock ROM.
Stock Rogers ROM (DLK4 - JB 4.1.1), rooted
KT747 (1/9/2013) kernel
CWM Recovery 6.0.2.3
PlayerPro Music Player
On my old Xperia X10, I had CM7 and had no end of issues with BT:
- Sometimes it would connect and there would be no sound
- Sometimes it wouldn't connect at all
- Sometimes it would cut out after switching songs
- It would stutter a lot whenever Wi-Fi was enabled (but I think that was a problem with the Xperia).
When I tried CM10.0 on my S3 I had similar connection issues, just not as bad. Also, the volume gain over BT was much lower, so I had to turn the car speakers way up. Stock 4.1.1 doesn't have any of these problems. The only problem I had was the audio switching over to speaker after turning off the car, but I fixed it.
Also, BT is apparently broken in 4.2.1 in general, not just CM10.1. Google confirmed a BT patch that works on the Nexus 7, due for release with 4.2.2: http://www.expertreviews.co.uk/smar...confirms-android-4-2-bluetooth-streaming-flaw
TIP: Don't forget to turn up the volume on your phone. I don't know how many times I accidentally turned down the volume and thought that it wasn't working. Now I have Tasker do it for me whenever I connect. :good:
4.1.2 has Bluetooth working use it everyday. (Stock and ROM.) Can't tell u which combo I use at a time. I flash a different ROM everyday. As 4.2.1bluetooth is broken expect for task's AOKP. He has it workingish.
Now as connecting to a car. Depends on what it connects as. And I've learned going to and from ROMs when u connect a source hit the volume up 9/10 times it works
Sent from my SGH-I747 using Tapatalk 2
Ok so it's been a while I didn't use my phone with a wired headset, but some time ago I would always use it to listen to music on my daily commute. Lately I started using it again. I've always used it with some Soul SL99 for music and calls with no problems.
But since 2 days ago I noticed it stays on headset mode even after disconnecting the headphones. when I make a call the built in mic and speaker don't work and the proximity sensor disabled. I can use it on speaker with no problem, and if I connect the headset people don't here me clearly. I have to restart the phone to exit headset mode on it, but whenever I connect my headphones it'll stay in headset mode no matter what until I restart it again.
Only weird thing I've done is try out different audio mods, like AwesomeBeats, Ac1d audio and Noozxoide. So I can't tell if it's damaged hardware or software. I've tried full wiping my rom, I've tried 3 different Roms including going back to 4.1 and on every single rom it does the same thing.
So basically my question is, could it be software driver related? Or most likely hardware? If software, would there be a fix? And if hardware, what piece would it be, the loud speaker/headphone module, or the headphone flex cable?
Has anyone experienced this before?
I have no experience with it, but maybe this will fixed in the next update to fix Bluetooth streaming.
Can you try cm10 stable or another 4.2 rom and see if that helps
Sent from my Nexus 7 using Tapatalk 2
BrianDigital said:
I have no experience with it, but maybe this will fixed in the next update to fix Bluetooth streaming.
Can you try cm10 stable or another 4.2 rom and see if that helps
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
I did, I tried AOKP latest build, XenonHD, CNA 3.8.0, and some others. Still does the same thing. Hopefully it is software and I won't have to buy replacement parts.
No one can help?
....
Mods can close this thread, obviously there's no support in GN forums whatsoever,
Please read forum rules before posting
Questions go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
Still no one can help?
I've bought a Nexus some days ago and it already came with 4.2.1. I have just added root and CWM.
Yesterday I tried for the first time to connect it to my car's bluetooth handsfree kit. I activated Btooth, but I've not found any way to make the phone visible. Tapping on the phrase "your phone is not visible" did nothing. It was searching for devices but found nothing. Later at home I've found on google forums many people that have problems with bluetooth on 4.2.1. I also found that in some situation it is impossible to turn it off, and it does not work correctly. I have found this advice:
Go in settings - applications. swipe to the right last page "ALL". Search for bluetooth pairing app. Click on it and terminate it. Maybe you have to tap twice. Now your BT is off. Now go in application again (or use your favorite widget, like widgetsoid) and turn BT on again. Now it should work (for some time, only !!) This way I was able to pair Nexus with handsfree and also I've made some calls.
From forums, it seems a software bug. Found in other phones also, not only on Nexus.
Cheers
Sergio