[Q] Bootloader unlocked, s-on, want to get s-off - Verizon HTC One (M7)

Hey all, I got my One the day it came out so I was lucky and was able to unlock the bootloader through htcdev. I haven't wanted to get s-off until now since I was pretty content to have the bootloader unlocked and s-on. I was looking into the rumrunner s-off but I wasn't sure if since I already unlocked the bootloader if I could use that method. Currently I am using CM 10.2.
In fastboot, here is what my phone reads (if that is at all helpful):
*** TAMPERED ***
*** UNLOCKED ***
M7_WLV PVT SHIP S-ON RH
HBOOT-1.54.0000
RADIO-1.12.42.0731
OpenDSP-v31.120.274.0617
OS-1.10.605.8
wMMC-boot 2048MB
Aug 7 2013,16:38:58.0

I know for a fact you would have to go back to stock everything. I would take a look through the original thread I know this has been talked about before in there.
http://forum.xda-developers.com/showthread.php?t=2473644

thanks for the reply. I looked through the thread and couldn't find anyone that was in the same position. Maybe I'm just bad a searching but I did look through the thread already.

Look around page 8/9. From the looks you need to go back to stock with the stock kernel for it to work properly.

Thanks again. I haven't been able to find the stock files anywhere. Any suggestions?

Stock rooted roms: http://forum.xda-developers.com/showthread.php?t=2485319
RUU: http://forum.xda-developers.com/showthread.php?t=2437436

Related

Problem trying to unlock bootloader

My Wildfire S is:
*** LOCKED ***
MARVEL PVT SHIP S-ON RL
HBOOT-1.09.0099
MICROP-0451
RADIO-7.57.39.10M
Feb 8 2012, 18:29:31
I've followed the instructions at http://www.htcdev.com/bootloader/ruu-downloads which, for my network (O2UK), instructs me to "update" my ROM to 2.13.206.1. So I've updated OTA and find I have 2.26.401.3.
The problem is that the RUU from the above website won't recognise this 2.26.401.3 ROM as 2.13.206.1 and insists I "update" to 2.13.206.1 which I do not know how to do.
Is there any other way I can unlock the bootloader? Or can I get the 2.13.206.1 ROM from somewhere else and install that?
Just proceed to step 1..............If your version is higher than specified,you can unlock your phone's bootloader
You cannot install other ROM into your phone without bootloader unlocked.root permissions and CWM recovery.
If i helped you,click the "Thanks" button.Sorry for my English and have a nice night !
P1ngP1ng said:
My Wildfire S is:
*** LOCKED ***
MARVEL PVT SHIP S-ON RL
HBOOT-1.09.0099
MICROP-0451
RADIO-7.57.39.10M
Feb 8 2012, 18:29:31
Click to expand...
Click to collapse
I think you're already have HBOOT unlockable (xxxx99)
Go to steps unlock bootloader without download ruu from htcdev.
Sent from MARVEL
You really don't need to update the boot loader and search for RUU when the HBoot ver is 1.08.xxx or later.
Just go thru this guide, will help you
http://androidforums.com/wildfire-s-all-things-root/480954-guide-how-root-wildfire-s-s-finally.html
Hope this may be useful.
Senthamil said:
You really don't need to update the boot loader and search for RUU when the HBoot ver is 1.08.xxx or later.
Just go thru this guide, will help you
*Androidforums-link*
Hope this may be useful.
Click to expand...
Click to collapse
Hi
I have the exact same Phone values and I got threw the prozess(the one behind the link above) and i got my wfs to ***UNLOCKED*** and i'm able to install new ROM's
buuuuuuuut
every Rom i installed is not capable to make or receive phone calls. Every time i try to do a call, the wfs says:
android.phone.prozess is shutting down
Did i forget anything or did anything wrong?
Got any help?
@clusternate, if your phone is MarvelC (cdma) then you have to flash ROM that suits your model.
Senthamil said:
@clusternate, if your phone is MarvelC (cdma) then you have to flash ROM that suits your model.
Click to expand...
Click to collapse
I've got the europe (germany) version. so i think i need the GSM version.
I'm quiet new to rooting this devices. Are there different versions of every ROM?
I tried about 6-7 ROM's and not one of them worked. (MIUI, CM7, CM9, everyone from the wfs section of this forum)
A co-worker told me something about updating the modem of my wfs.
Is this true and is there a way to do it?
PS. Which ROM should work on my device?
PPS. There is another prozess that is failing.
Prozess.android.acore is also crashing.

[Q] Totally stuck, please help!

Alright, so I've been tinkering around with my AT&T One X for a while but am very new to rooting. I was able to root my phone and install the CM10 rom after getting supercid but I didn't do a nandroid backup. I was also able to s-off my phone by following one of the guides here on the forum as well. What I have been trying to do now is installing a new rom - ARHD. When I try to install this rom through recovery (clockwork mod touch 6.0.x), it hangs at 30% extracting, and boots me back up on recovery.
I also wanted to see if I could bring my phone back to the stock htc rom, but when doing a: fastboot getvar version-main - nothing shows up so I'm not quite sure where to go from there. Is there something I'm missing here?
Here is what my bootloader screen looks like:
*** TAMPERED ***
*** UNLOCKED ***
EVITA PVT SHIP S-OFF RL
CID-11111111
HBOOT-2.14.0000
RADIO-0.24p.32.09.06
OpenDSP-v34.1.0.45.1219
eMMC-boot
Nov 26 2012, 18:37:14:-1
modernmarv3L said:
Alright, so I've been tinkering around with my AT&T One X for a while but am very new to rooting. I was able to root my phone and install the CM10 rom after getting supercid but I didn't do a nandroid backup. I was also able to s-off my phone by following one of the guides here on the forum as well. What I have been trying to do now is installing a new rom - ARHD. When I try to install this rom through recovery (clockwork mod touch 6.0.x), it hangs at 30% extracting, and boots me back up on recovery.
I also wanted to see if I could bring my phone back to the stock htc rom, but when doing a: fastboot getvar version-main - nothing shows up so I'm not quite sure where to go from there. Is there something I'm missing here?
Here is what my bootloader screen looks like:
*** TAMPERED ***
*** UNLOCKED ***
EVITA PVT SHIP S-OFF RL
CID-11111111
HBOOT-2.14.0000
RADIO-0.24p.32.09.06
OpenDSP-v34.1.0.45.1219
eMMC-boot
Nov 26 2012, 18:37:14:-1
Click to expand...
Click to collapse
you should go the the at&t one x forum

tried to use ruu to update, phone stuck in bootloader

So my phone is currently on a custom rom and I was trying to take it back to stock. I downloaded a ruu from htc dev because a bunch of guides I saw pointed me to do that and click a few buttons during the process it said my phone can't be updated and now i am stuck on a screen that looks like the bootloader but says this
***tampered***
***unlocked***
m8_UL PVT SHIP S-ON
HBOOT- 3.18.0.0000
Radio - 1.19.213311491.03g
OPENDSP - V382.2-00542-m8974.0311
OS-
EMMC-Boot 2048MB
Jul 16 @014, 03:33:24.0
SECURITY Fail!
RUU
I cant do anything from this screen. I tried to use another tool to get me into recovery but it says device not found. I also tried going through revovery through the ruu but nothing happens there. What else can i try to save my phone?
jayrocc said:
So my phone is currently on a custom rom and I was trying to take it back to stock. I downloaded a ruu from htc dev because a bunch of guides I saw pointed me to do that and click a few buttons during the process it said my phone can't be updated and now i am stuck on a screen that looks like the bootloader but says this
***tampered***
***unlocked***
m8_UL PVT SHIP S-ON
HBOOT- 3.18.0.0000
Radio - 1.19.213311491.03g
OPENDSP - V382.2-00542-m8974.0311
OS-
EMMC-Boot 2048MB
Jul 16 @014, 03:33:24.0
SECURITY Fail!
RUU
I cant do anything from this screen. I tried to use another tool to get me into recovery but it says device not found. I also tried going through revovery through the ruu but nothing happens there. What else can i try to save my phone?
Click to expand...
Click to collapse
nvm i fixed that problem and now I'm back to square one. maybe someone could point me in the right direction from here.
I'm currently on 4.4.3 kk and am trying to get back to stock from my custom rom. clearly the ruu I used was the incorrect method and the other method I was going to try which involves using hasoon's toolkit appears to not be the answer because when i went to check the cid the version number was not available ( unless im missing something here)
any assistance that someone is willing to offer would be appreciated.
You have to re-lock your bootloader before you run the RUU.
VolcanicSkunk said:
You have to re-lock your bootloader before you run the RUU.
Click to expand...
Click to collapse
thanks, the guide i was looking at failed to mention that.
jayrocc said:
thanks, the guide i was looking at failed to mention that.
Click to expand...
Click to collapse
How did you get back to where you were previously? Did you re-flash your custom ROM?

Need Help! Flash Amnesia!!!

Hi all, I have an att m8 that and am running sinless rom gpe 4.4.4 and wish to get back to a gpe edition rom, with s-off. Aside from unlocking the bootloader and rooting, I'm not sure how I got here, and I deleted my nandroid backup when I came from sense 4.4.2. Total noob status here.
My goals are to get it back to gpe, with s-off so I can sim unlock the phone as well, in case I sell it for use on tmobile. Even getting back to sense, s-off, and sim unlocked would be great. I'm needing to do it fast, as I may need to trade the device to a tmobile user.
When I converted, I believe I skipped the s-off step, and cannot get it to work with firewater. I'm stuck at which step to take next? I've heard that s-off cant be achieved on certain phones with firewater, however I'm wondering if me skipping a step could be the reason, or that its simply my software/phone version. I dont know if I flashed something that achieved s-off without me knowing, or that it's a regional variant, etc etc.
Here are the details:
Tampered
Unlocked
M8_UL_CA PVT SHIP S-ON
HBOOT-3.16.0.0000
RADIO- 1.16.21331931.LA11G
OpenDSP-v38.2.2-00542-m8974.0311
OS-
eMMC-boot 2048MB
4.4.4
Baseband Version
1.16.21331931.LA11G_20.31A.4145.02L
Kernel version
3.4.0-SinlessKernel-v2.5.7+
SinlessROM #27
Build number
SinLessROM GPe v3.6.2
FYI, I'm on a mac, and dont have access to a pc, which I assume most of the all-in-one tools exist.
Any help would be appreciated!! I dont have much to offer, inbox invite anyone? Thanks!
First step, try Firewater for s-off... Likely won't work, so try Sunshine.
Then go from there. ?

How can I update my (ViperOne) Custom Rom (questions about firmware updating)

Hey,
I'm a bit confused on how to update my ViperOneM8 Rom to the newest version.
When I got my One, I rooted it, unlocked the Bootloader via HTCdev and managed to get it to be S-Off.
I installed the ViperOne Rom Version 1.8.0 and since then, I haven't touched it.
Now I'd like to upgrade it to the newest version but I'm kind of confused about having to update my firmware and so on. Before I do something stupid and break my device, I figured it would be better to just ask for advice here
I'm especially unsure about which firmware (if any) I have to flash (considering that the device was bought in Germany and has had a Vodafone branding) and how to do this.
Here is all the information from the Bootloader:
" "*** TAMPERED ***
*** UNLOCKED ***
M8_UL PVT SHIP S-OFF
CID-VODAP102
HBOOT-3.16.0.0000
RADIO-1.16.2133156.UA15G
OpenDSP-v38.2.2-00542-M8974.0311
OS-
eMMC-boot 2048MB
Apr 29 2014,15:37:22.0"
I'd appreciate it if you could help me.
Thank you
stecklars said:
Hey,
I'm a bit confused on how to update my ViperOneM8 Rom to the newest version.
When I got my One, I rooted it, unlocked the Bootloader via HTCdev and managed to get it to be S-Off.
I installed the ViperOne Rom Version 1.8.0 and since then, I haven't touched it.
Now I'd like to upgrade it to the newest version but I'm kind of confused about having to update my firmware and so on. Before I do something stupid and break my device, I figured it would be better to just ask for advice here
I'm especially unsure about which firmware (if any) I have to flash (considering that the device was bought in Germany and has had a Vodafone branding) and how to do this.
Here is all the information from the Bootloader:
" "*** TAMPERED ***
*** UNLOCKED ***
M8_UL PVT SHIP S-OFF
CID-VODAP102
HBOOT-3.16.0.0000
RADIO-1.16.2133156.UA15G
OpenDSP-v38.2.2-00542-M8974.0311
OS-
eMMC-boot 2048MB
Apr 29 2014,15:37:22.0"
I'd appreciate it if you could help me.
Thank you
Click to expand...
Click to collapse
since you are S-OFF then you better update the firmware using NOWIPE zip file, you can get the info from this thread:
http://forum.xda-developers.com/htc-one-m8/development/progress-fuu-m8-t2813792
(make sure you choose the right nowipe zip file)
Then from the bootloader, go to recovery (it's installed by the firmware automatically) and install the Viperone rom 3.10 (make sure you put that zip file in your sd card before you start)
thanks

Categories

Resources