Android 4.3 boot but doesn't reboot - Galaxy Note II Q&A, Help & Troubleshooting

Why after flashing most of 4.3 roms it boot an works perfect until i reboot? It stuck on note 2 logo. factory reset failed. I can only wipe data and reflash rom or restore my 4.1.2 backup.
Sent from my Desire HD using xda app-developers app

Do a clean wipe before flashing. ....always be on latest recovery
Sent from my GT-N7100 using XDA Premium 4 mobile app

Whenever you flash a new rom, don't flash any mods directly. Complete the initial setup, wait for 5 minutes for the rom to settle, then reboot. Later you may flash mods
Sent from my GT-N7100 using XDA Premium 4 mobile app

Kuljeet Singh said:
Do a clean wipe before flashing. ....always be on latest recovery
Sent from my GT-N7100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I Always do a full wipe, factory, system, data, internal storage, cache and dalvic
manan999583 said:
Whenever you flash a new rom, don't flash any mods directly. Complete the initial setup, wait for 5 minutes for the rom to settle, then reboot. Later you may flash mods
Sent from my GT-N7100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Everything like you wrote, after flashing rom always do first boot. After this works great until i reboot phone.
Also do a tutorial by someone, factory reset-flashing rom, wipe cache and dalvic-flashing gapps for 4.3 and wipe cache/dalvic-reboot and also doesnt work.
Sent from my GT-N7100 using xda app-developers app

Uhm, i'm guessing you tried to flash the new 4.3 Leak ROM
Bet you 10$ you didn't flash the new Bootloader before flashing the MJ5 or MI6 ROM?

You lose , i flash mj5 bootloader first
Sent from my GT-N7100 using xda app-developers app

elpabel84 said:
You lose , i flash mj5 bootloader first
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
Good
I don't what else could be the problem. Tried Super Wipe? (Philz recovery ---> Wipe Data/Factory Reset ---> Clean before installing new ROM?)

Related

Phone rebooting n stucks on boot animation on hyperdrive

Sent from my SGH-I747 using xda premium
Tried more then three kernel still having problems with rebooting with new rsl10 plez help me
Sent from my SGH-I747 using xda premium
nepal1 said:
Tried more then three kernel still having problems with rebooting with new rsl10 plez help me
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
Did you try wiping data and cache after flashing?
I did ..whenever it stuck on boot animation I have to pull out battery to go back recovery n wipe cache n fix permission. .to get back
Sent from my SGH-I747 using xda premium
nepal1 said:
I did ..whenever it stuck on boot animation I have to pull out battery to go back recovery n wipe cache n fix permission. .to get back
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
Maybe start over. Wipe data, cache, dalvik, format /system, flash rom. Reboot back into recovery and wipe data & cache again. Reboot
I'm assuming you made a backup before flashing this, in the event you need to restore it if this does not work
Its not working again...think need to go back to 9
Sent from my SGH-I747 using xda premium
Which kernel versions have you tried? Those based on 3.0 or 3.4? I believe he may have changed the base for the ROM in this release. Are you flashing the ROM by itself or are you flashing multiple zips at the same time?
Sent from my SAMSUNG-SGH-I747

[Guide] How to PROPERLY flash a rom

OK guys, lately I've been seeing a little too many people complaining about bootloops and UI crashes, etc when installing/flashing a new rom. This guide includes installing an update of the rom you're currently on that has been re-based as well.
The only reason I'm making this guide is so that users stop filling threads with these issues that are caused by user errors (99% of the time). I haven't bootlooped or had any problems at all when flashing a new rom and I can promise you that I am a huge flashaholic. Here are the steps for a TOUCHWIZ rom:
1. Download rom and calculate md5 checksum (this can be done using ES file explorer from the play store)
2. Reboot into recovery and make a nandroid backup! Can't stress this enough...
3. Do a FULL wipe. This is where I notice the error that most people make. You must do a wipe of data, cache, dalvik cache, preload AND SYSTEM.
- Don't just do a Factory reset, you must manually wipe system as well to prevent any issues. In TWRP this will be under advanced wipe, and in Philz touch recovery this is done by selecting the "Full wipe to install a new rom" option.
4. AFTER wiping all of the above mentioned partitions, then look for the rom in your internal/external SD card and install/flash it.
- if the rom has an aroma installer, sometimes it'll include a full wipe option in there, this doesn't mean that you can skip the full wipe done in step 2 of this guide.
5. Allow the rom to install everything and then choose the reboot option within your chosen recovery.
6. Let the phone reboot, input all of your info in the initial setup and then let the phone sit for a couple minutes. After this I usually reboot the phone again as a habit.
If you follow these steps to the T you shouldn't have any problems. I've yet to bootloop once on this phone with any rom. Now go and flash away!
Other possible issues/fixes:
- if you have a 64gb SD card, your current kernel or the kernel included with the rom you're flashing might not support 64gb SD cards in EXfat format. A fix for this would be to either flash another kernel that has 64gb SD card support or to copy everything from your SD card to a computer, format your EXfat sd card to fat32 format and then retransfer the files back to your sd card.
-some people have reported that moving the zip file from the internal SD to the external SD or vice versa has fixed flashing issues so make sure to try this as well, not sure why this works but it does sometimes.
-if a specific cause can't be diagnosed it's always recommended to restore your phone back to complete stock using Odin to flash stock firmware. Here is a link to the stock firmwares (I take no credit for that thread): http://forum.xda-developers.com/showthread.php?t=2335109
*Will add more info
Just in case.
Sent from my SGH-M919 using XDA Premium 4 mobile app
The twrp has the system wipe option. I don't see that with Cwm, just factory rest/data, and the two caches
Sent from my SGH-M919 using xda app-developers app
shengwang917 said:
The twrp has the system wipe option. I don't see that with Cwm, just factory reset/data, and the two caches
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
-Data wipe/Factory reset. In Philz CWM version when you chose this it stated "Wipe phone for new ROM"
Every recovery as far as I've seen has a system wipe option, just have to look for it. Only mention TWRP because I haven't used the other recoveries in a while.
Sent from my SGH-M919 using XDA Premium 4 mobile app
Question, for restoring nandroid backup : before I first started to flash roms last week. I did the following with Twrp, backup, - wipe data and caches(no system), then I backup again before moving forward with the flash. My question is: can I just restore my second backup with just the system without the data.?
Sent from my SGH-M919 using xda app-developers app
Why do you backup twice? And why would you restore just the system partition? You might as well just reflash the rom so you don't waste space having a system only backup.
Sent from my SGH-M919 using XDA Premium 4 mobile app
shengwang917 said:
Question, for restoring nandroid backup : before I first started to flash roms last week. I did the following with Twrp, backup, - wipe data and caches(no system), then I backup again before moving forward with the flash. My question is: can I just restore my second backup with just the system without the data.?
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
A nandroid will restore your phone exactly how it was when you made the back up.
If I read it correctly, on the 2nd backup, you did a wipe before you did a backup.
So if you restored that 2nd backup, it will have wiped ROM (no data and will need to set up phone again). Hope that make sense.
Yeah that's what I want, I want to go back to that clean clean rom, I don't need my user data
Sent from my SGH-M919 using xda app-developers app
Then don't restore a backup for that. Just reflash the rom.
Sent from my SGH-M919 using XDA Premium 4 mobile app
marcoxx626 said:
Why do you backup twice? And why would you restore just the system partition? You might as well just reflash the rom so you don't waste space having a system only backup.
Sent from my SGH-M919 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Cause I'm OCD when comes to things like this, seriously lol. I move all the backups to the external SD and my computer lol. So not too worried about taking up space. I just want to see if everything is working normally with the clean stock rom. I.e. Able to send MMS. Read and write to ext SD properly.
Sent from my SGH-M919 using xda app-developers app
shengwang917 said:
Cause I'm OCD when comes to things like this, seriously lol. I move all the backups to the external SD and my computer lol. So not too worried about taking up space. I just want to see if everything is working normally with the clean stock rom. I.e. Able to send MMS. Read and write to ext SD properly.
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
Well if you just want to go back to a fresh clean install there's no point in restoring a backup. Just reflash the rom bro. Any kernel changes or system app changes will still be there if you restore a system backup but won't be there if you reflash the rom (after doing full wipe that is).
Sent from my SGH-M919 using XDA Premium 4 mobile app
marcoxx626 said:
Well if you just want to go back to a fresh clean install there's no point in restoring a backup. Just reflash the rom bro. Any kernel changes or system app changes will still be there if you restore a system backup but won't be there if you reflash the rom (after doing full wipe that is).
Sent from my SGH-M919 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
This is it right ? http://forum.xda-developers.com/showthread.php?t=2267895 , I think there is a Odin back to stock thread on here too
Sent from my SGH-M919 using xda app-developers app
shengwang917 said:
This is it right ? http://forum.xda-developers.com/showthread.php?t=2267895 , I think there is a Odin back to stock thread on here too
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
Ok, now you lost me. What is your ultimate goal in this? Back to complete stock like out of the box?
Sent from my SGH-M919 using XDA Premium 4 mobile app
marcoxx626 said:
Ok, now you lost me. What is your ultimate goal in this? Back to complete stock like out of the box?
Sent from my SGH-M919 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Sorry lol, yeah i want to go back to right out of the box stock.
Sent from my SGH-M919 using xda app-developers app
Yeah follow that thread. Please hit thanks if I helped at all.
Sent from my SGH-M919 using XDA Premium 4 mobile app
After I flash unwizzed rom in aroma after it installs everything it says assert failed : package_extract_file("boot.img","/temp/boot.img") ?? It boots the Samsung Galaxy S4 screen then turns off then back on then back into recovery.. been doing this for alot of ROMs i try to flash
shengwang917 said:
The twrp has the system wipe option. I don't see that with Cwm, just factory rest/data, and the two caches
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
For cwm:
Mounts/Storage - Mount/System.
Sent from my SGH-M919 using Tapatalk 4
Robdizz said:
After I flash unwizzed rom in aroma after it installs everything it says assert failed : package_extract_file("boot.img","/temp/boot.img") ?? It boots the Samsung Galaxy S4 screen then turns off then back on then back into recovery.. been doing this for alot of ROMs i try to flash
Click to expand...
Click to collapse
Not sure what that could be. Did you check the md5?
Sent from my SGH-M919 using XDA Premium 4 mobile app
I've been asking everyone it does this on alot of roms i flash the only one that worked was Alpha 5.0 but tried to go to 7.0 and did same thing. How do u check the Md5?

Is this rom compatible?

I found this ROM and it looks nice but it doesn't state wether its for the n7100 or n7105?
http://forum.xda-developers.com/showthread.php?t=1992386&nocache=1
I have an N7100 but I just want to be sure.
And I was wondering is format system on CWM recovery the same as wiping cache and davlik? Im new to all of this
No one? It really can't be difficult to answer...
Sent from my Nexus 7 using xda app-developers app
If you press the download button it takes you to the download page where they are all listed as N7100
Sent from my GT-N7105 using XDA Premium 4 mobile app
Uhmmm nope it cannot run on n7100 .. However there other similar ROMs that do support t0lte a.k.a n7105 .. Like jellybam or carbon and many others..
Sent from my GT-N7100 using Tapatalk
Boymysterio29 said:
And I was wondering is format system on CWM recovery the same as wiping cache and davlik? Im new to all of this
Click to expand...
Click to collapse
No, formatting system will wipe the rom from the device. Cache and dalvik wipe only the "temporary file" partition.
Do not wipe system unless you are getting ready to flash a new rom. Cache may be wiped at any time and will not delete any of your data.
Sent from my SPH-L900 using Tapatalk
OK thanks
Sent from my Nexus 7 using xda app-developers app

[Q] Stuck in recovery Phoenix Rom v16

hello xda, before this, my Samsung N7100 is on Phoenix v15.7 and i decided to update to v16 but then after completing everything to v16, my phone reboots and goes to recovery mode immediately and i can't boot the phone up. please help! thank you
my first time trying, i just updated the thing without wiping the phone and i did a superwipe after that, and still not working.
Reflash the rom with cache and delvik only.
Sent from my GT-N7100 using XDA Premium 4 mobile app
nitol said:
Reflash the rom with cache and delvik only.
Sent from my GT-N7100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
how do i do that?
benkong27 said:
how do i do that?
Click to expand...
Click to collapse
Why not, you are on recovery means your recovery is working. You have the rom on your sdcard right? Wipe cache and dekvik cache first then Just flash the rom again.
Sent from my GT-N7100 using XDA Premium 4 mobile app

Cannot complete reboot after flashing Rom

Good day fine community.
My Galaxy S3 i747M(Rogers) stays stuck @ Galaxy S3 screen after flashing this ROM S3Rx 3.0 TouchWiz 4.3 MJB (1-27-14) Full AROMA.
1. First succesfully flashed 4.3 bootloader and MK5 modem from within a 4.1 ROM
2. Then used TRWP, full wipe, formatted internal sd, flashed ROM and loaded well.
3. Then attempted a Nandroid, which for some reason stayed almost an hour in the "backing up system data", so I cancelled it when the "cannot finish" message appeared.
4. Then rebooted, and now stays stuck in Galaxy S3 screen.
I redid 1, 2 and 4, and still stuck, even if I let the phone rest for more than 10 minutes.
For the life of me, it seems to be a bootloader issue, but I am unsure.
Anyone has any idea what I did wrong?
Thank you.
Try wipe of /system and all other wipes that you can apply. These are under the advanced section of your recovery
This will wipe your whole phone. Then try and reboot
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Reboot into what? Everything's wiped.
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Builtnoob, did that. My sd card was fully wiped, as well as cache and dalvik. Thanks for the input.
Sent from my SGH-I747M using XDA Premium 4 mobile app
Shortydogg, once i flashed and was in the launcher, and alk was working fine, I rebooted in to recovery to do nand. Even if the nand was uncuccessfull, i should still be able to boot into the rom, since it was already running. That is my question: how come it stays stuck at boot. Thx for looking into it.
Sent from my SGH-I747M using XDA Premium 4 mobile app
Usually first boot takes a good half hour at times. Give it some time. However this could be due to a faulty flash. Or some corruption of data. Use twrp to mount your internal memory. Then redownload the ROM and reflash .
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Did you format the internal SD or did you format the system, data, and cache from recovery?
audit13, I formatted everything but my ext sd card. Tonight I will try again, this time with fresh download and wiping cache and dalvik after flashing, before booting, and will report back. Thanks guys.
Sent from my SGH-I747M using XDA Premium 4 mobile app
Me said:
audit13, I formatted everything but my ext sd card. Tonight I will try again, this time with fresh download and wiping cache and dalvik after flashing, before booting, and will report back. Thanks guys.
Sent from my SGH-I747M using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Don't forget the /system wipe as a lot of the stock ROMs do need it
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
buildnoob, 10-4.
Sent from my SGH-I747M using XDA Premium 4 mobile app
An easier fix may be to just flash a pre-rooted 4.3 ROM that is made for the Bell, Telus or Rogers version of your phone. Then, load a custom recovery to flash custom ROMs.
http://forum.xda-developers.com/showthread.php?t=1739426
Buildnoob, thanks for the info. I did fresh install and wiped cache and dalvik after flash and now all is well.
Thanks guys for the help.
DroidArt said:
buildnoob, 10-4.
Sent from my SGH-I747M using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Test reply

Categories

Resources