Hello,
I've read through the Everything thread on Development, as well as searched using the xda search and google site search, but come up with nothing.
The Everything thread mentions that the current version of CWRM won't charge when the phone is off or in recovery, but I can't find anything about which version is the 'latest' (6.0.1.2, 5.0.2.7), nor if this also affects the TWRP recoveries (2.6.3, 2.4.1)? For that matter, I can't find anything that even mentions the charging problems at all aside from the Everything thread!
If there is a charging problem with all of the third party ROMs, is there a method to go back to the stock recovery after flashing in a ROM and backing up /efs/? I'm basically shooting for a fully functional phone and I don't plan on changing ROMs all over the place, just root and ICS.
Help?
Thanks!
TooG435 said:
Hello,
I've read through the Everything thread on Development, as well as searched using the xda search and google site search, but come up with nothing.
The Everything thread mentions that the current version of CWRM won't charge when the phone is off or in recovery, but I can't find anything about which version is the 'latest' (6.0.1.2, 5.0.2.7), nor if this also affects the TWRP recoveries (2.6.3, 2.4.1)? For that matter, I can't find anything that even mentions the charging problems at all aside from the Everything thread!
If there is a charging problem with all of the third party ROMs, is there a method to go back to the stock recovery after flashing in a ROM and backing up /efs/? I'm basically shooting for a fully functional phone and I don't plan on changing ROMs all over the place, just root and ICS.
Help?
Thanks!
Click to expand...
Click to collapse
I think something like 6.0.4 the latest CWMR. ( you can build with http://builder.clockworkmod.com/ , Existing Device option doesnt work)
It charges in latest TWRP, you can see "+" char when on charge next to the battery level.
Stock uses recovery for official upgrade, and factory reset. We have only offline charge issue, but recovery has no effect on it. Offline charger works with a limitation. I wouldnt bother you with the explanation, since you said you would like to use stock ICS.
You can backup efs in rooted rom without recovery. You can always flash recovery with odin phone in download mode.
Thanks.
I guess I had assumed the comment was referring to the builds in the Development forum, not the overall CWMR project! Is there a currently recommended recovery, or is it a toss up to personal preference? I'm not so much tied to ICS as tied to a completely working ROM - especially as I see all the bluetooth and skype issues with the JB ROMs, which (as far as I can tell) are still unresolved / unknown?
TooG435 said:
Thanks.
I guess I had assumed the comment was referring to the builds in the Development forum, not the overall CWMR project! Is there a currently recommended recovery, or is it a toss up to personal preference? I'm not so much tied to ICS as tied to a completely working ROM - especially as I see all the bluetooth and skype issues with the JB ROMs, which (as far as I can tell) are still unresolved / unknown?
Click to expand...
Click to collapse
I make TWRP for i927, we dont have other up to date, but you can build yourself.
Dont you have issue with stock ICS? I made up to date issue list in me CM 10.2, you could decide it suit for you or not, you may know stock limitation already.
I hope voip issue would be resolved soon.
bubor said:
I make TWRP for i927, we dont have other up to date, but you can build yourself.
Dont you have issue with stock ICS? I made up to date issue list in me CM 10.2, you could decide it suit for you or not, you may know stock limitation already.
I hope voip issue would be resolved soon.
Click to expand...
Click to collapse
My only real requirement in a phone is that it be reliable - I don't want to have to pop out batteries or have no audio on calls if I get stranded in the middle of nowhere. At this point, my phone is still in the mail - got a used one from a friend, but it hasn't arrived, so I haven't had much ability to experiment yet.
My Android experience is exclusively with a Transformer TF101, which had 4.0.4 ICS stock and is currently running Katkiss JB 4.2.2_226 (Katkiss 4.3 isn't stable enough for me yet, was getting daily crashes last time I tried). All of the phone components are new to me - and the Glide seems to have a more fragmented recovery scene than the TF101, which is pretty much TWRP or nothin'
Thanks again for your help!
Related
I have noticed a few people complaining of call echo with AOSP ROMs (even with "noise suppression" checked), as well as some stock based ROMs. I was having the same problems. Stock based ROMs were better, but echo was still there. I tried several radios without avail.
What finally worked for me was going back to stock through Kies (keep in mind this will wipe your internal sd as well, so move your backups off your phone). I have since been able to flash PACman ROM without call echo. I have not tried any others but I assume the result would be the same. If someone is willing to test other ROMs/radios and report back that would be great. I just don't have the time.
Also, I did not flash a different radio after going back to stock. I assume it would be okay to do so, but I am not a dev so that is only a guess. What I think going back to stock fixes is some missing/corrupted libraries that are somehow surviving ROM flashes (like in a protected storage or something like that).
Anyway, I hope this helps someone else.
EDIT: This doesn't work all the time, and has only really worked for me once. I have done it twice and it worked great the first time, and not really the second. It's worth a shot, but just keep this in mind.
:::Specifics:::
Essentially all I did was go to the latest stock rom image from T-Mobile. Kies upgraded my phone to UVLI1, which is T-Mobile's latest 4.0.4 stock rom. Kies essentially wiped everything from my phone (except external storage) and imaged it with the latest factory image which includes the latest radio. I have since been able to root, install TWRP and flash an AOSP based rom without degradation in call quality. I did not flash over the radio that was installed by Kies, and I did not wipe android secure in TWRP (don't know if that made a difference).
What you should try if you are having call quality issues:
1. Go back to stock unrooted (use your method of choice, I used Kies but that doesn't work for everyone so try Odin or Heimdall)
2. If you didn't go to the latest stock unrooted image from T-Mobile and Samsung, do that through Kies which should now work for almost everyone (as of Jan. 1, 2013, the latest stock image is UVLI1/TMBLI1)
3. You should now be able to root and flash any rom you like without call quality degradation (if this is not true for you please let me know --- see above for what I did at this point)
I'd be interested in getting some feedback from this. Keep in mind that I am not always available and may only be able to reply once a day or less. Again, this is just what worked for me, it may not work for you. Please give yourself plenty of time when going through this process as Kies is not very fast (at least in my opinion).
UPDATE:
Here is how I got Kies to update my phone while still rooted and even running an AOSP rom. As always, do this at your own risk. I accept no responsibility for broken devices or lost data/pictures/music/etc. However, I have done this twice now, so just read and understand what you're doing and you should be fine.
Keep in mind that this WILL WIPE YOUR INTERNAL STORAGE! You have been warned.
1. Disconnect your phone from your computer
2. Launch Kies and click on Tools>Firmware Upgrade and Installation
3. Input model number (it's case sensitive !?) and hit OK
4. Input serial number (found under battery) and hit OK
5. Hit okay on windows until it starts downloading the latest firmware for your phone
6. After it's finished downloading it will tell you to put your phone in download mode and connect it to your computer. Do it, check "I understand..." and hit OK (I also opted out of the sending of information to Samsung)
7. Wait until it's finished. It will likely launch a window saying it's downloading a file for emergency recovery of your device.
8. When it's (finally) done it will tell you it was successful (hopefully). Your phone will automatically reboot and all will be well with the world and your phone.
Hope this helps.
kies fails recognize my phone. already have the phone drivers installed.
You have an interesting post, but it would be of more use to people if you specified the exact information about what's on your phone. Such as which stock ROM version you were able to flash through Kies and what radio version you are currently using.
There are different stock ROMs and radios on the forums, so it doesn't solve anything if you haven't told us what exactly works with your phone that others should try.
Here is the rub. I haven't been on stock unrooted rom since buying the phone in March. I have bounced around roms and radios quite a bit (probably at least one or two a week on average). My wife has complained of call echo for a long time (multiple roms, multiple radios and AOSP and touchwiz based roms). Touchwiz based roms had better call quality but echo was still present. I decided to Odin back to stock unrooted and see if it was a hardware issue or not. It wasn't a hardware issue because call quality was great. So I rooted the phone, installed the latest TWRP (2.3.3), but wasn't happy with stock rooted so I decided to try an AOSP rom. I wiped only cache, dalvik cache, system and data (not android secure, don't know if that made a difference or not). It works great; i.e. no call quality issues. I did not flash a radio.
So, essentially what I did was:
1. Went back to stock unrooted (Kies put me on latest 4.0.4 from T-Mobile, which flashed a radio, the rom and cleared internal storage)
2. Rooted and installed TWRP
3. Flashed my rom of choice, but not a radio and I didn't wipe android secure (not sure if that matters)
Honestly I don't know what about that process fixed the echo issues, all I know is it did. If you can't go back to stock unrooted through Kies then use Odin. There are great threads giving step by step instructions on how to do that. I just decided using Kies would be easiest for me, and it worked for me.
I hope these are the details you are looking for FineTalent. And thanks.
Excellent lol. If you own the d30 case from tmobile take it off. Worked for me as well.
I do have the d30 case but taking it off didn't seem to make a difference. Besides, the wife didn't like the idea of my phone going commando.
I used odin to go back to stock and the call quality was great. But as soon as i installed an AOSP rom (All Star Rom V6) the echo was back.
I did not know that LI1 was the latest 404 ROM ?
I can only get VLH1 as the latest ROM.
I know there is a LI1 radio available, but have never seen the LI1 rom itself, especially not on SamMobile/Firmware site.
Any links to the "official LI1 ROM"
Thanks
bert269 said:
I can only get VLH1 as the latest ROM.
I know there is a LI1 radio available, but have never seen the LI1 rom itself, especially not on SamMobile/Firmware site.
Any links to the "official LI1 ROM"
Thanks
Click to expand...
Click to collapse
It was simply the latest one Kies found for my phone. I believe it was labeled as UVLI1/TMDLI1, but I suppose I could be mistaken. If you install Kies on your computer (shudder, I know) and plug your phone in it will compare the rom version on your phone to the latest known rom from tmobile/samsung. You will need your phones serial number I believe. At least, it was needed when I "upgraded" anyway.
whytechapel_x said:
I used odin to go back to stock and the call quality was great. But as soon as i installed an AOSP rom (All Star Rom V6) the echo was back.
Click to expand...
Click to collapse
Can you give the following information:
1. Method of obtaining root
2. Custom recovery odined when obtaining root (I assume it's cwm 5.0.2.7)
3. Custom recovery used to flash AOSP rom
4. Steps taken to flash AOSP rom (I don't want this thread to become a "this is how I flash" thread, but I want to know what was different between your experience and mine, so wipe and install steps would be great)
5. Any mods flashed/done before testing call quality (or was it completely clean, i.e. just rom and gapps)
6. Which gapps did you flash (mine was latest for 4.1.2, so gapps released on oct. 11, anything later is for jb 4.2 and not compatible with 4.1.2 according to release notes)
monkeybuttons said:
Can you give the following information:
1. Method of obtaining root
2. Custom recovery odined when obtaining root (I assume it's cwm 5.0.2.7)
3. Custom recovery used to flash AOSP rom
4. Steps taken to flash AOSP rom (I don't want this thread to become a "this is how I flash" thread, but I want to know what was different between your experience and mine, so wipe and install steps would be great)
5. Any mods flashed/done before testing call quality (or was it completely clean, i.e. just rom and gapps)
6. Which gapps did you flash (mine was latest for 4.1.2, so gapps released on oct. 11, anything later is for jb 4.2 and not compatible with 4.1.2 according to release notes)
Click to expand...
Click to collapse
1.Well i didn't root my stock phone. After using odin
2.I used cwm 6.0.1.5
3.Same.
4. Well i followed the steps in the all star thread which is wipe data/factory reset. Then flashing rom and wiping cache and dalvik cache.
5. The all star rom is heavily modded so idk. I tried it with "noise suppression" on and off.
6. All star gapps.
I want to point out that as soon as i flashed jedi knight 6, the call echo was gone but i want to be able to use my AOSP roms without call echo.
Since I'm not a dev I can't really diagnose the problem. I only hoped that what worked for me would work for others as well.
When I went back to stock I rooted, but didn't like stock. TWRP has been my go to recovery for a while now and the options available in PACman rom have me by the heart strings, so those are the first things I tried. I wish I had time to fiddle around with it and truly try to find out why it worked for me but I just don't have that option right now. Sorry I'm not of more help.
Its OK. But can a dev clarify if maybe clockworkmod is what is causing the call echo? Probably not flashing AOSP ROMs right?
whytechapel_x said:
Its OK. But can a dev clarify if maybe clockworkmod is what is causing the call echo? Probably not flashing AOSP ROMs right?
Click to expand...
Click to collapse
CWM is in no way linked to the call echo issue, however, using the latest version will assist in ensuring your ROMs installs properly. Rather than using CWM I recommend flashing ROMs through TWRP 2.3.3.0, it is the most up to date recovery system for our phones at the moment.
FineTalent said:
CWM is in no way linked to the call echo issue, however, using the latest version will assist in ensuring your ROMs installs properly. Rather than using CWM I recommend flashing ROMs through TWRP 2.3.3.0, it is the most up to date recovery system for our phones at the moment.
Click to expand...
Click to collapse
OK. I went on and installed TWRP anyways and flashed tweakwiz and got call echo once more. I am aware that it flashes the blaze radio but still. Does this mean that my phone came out defective? But why is it that i get absolutely no echo on stock ics and luckily, jedi knight 6 neither? When i was using jedi knight 6,i was using the stock radio uvlh1? But if i have this same radio on AOSP roms or in other ones, i still get call cecho.
whytechapel_x said:
OK. I went on and installed TWRP anyways and flashed tweakwiz and got call echo once more. I am aware that it flashes the blaze radio but still. Does this mean that my phone came out defective? But why is it that i get absolutely no echo on stock ics and luckily, jedi knight 6 neither? When i was using jedi knight 6,i was using the stock radio uvlh1? But if i have this same radio on AOSP roms or in other ones, i still get call cecho.
Click to expand...
Click to collapse
I am not able to exactly help you with your issue as I am using a different ROM than you. However, if you have tried different radios and they did not seem to fix the issue, can you possibly try installing a different kernel? Also, check the phone settings and see if there is an option to turn on 'Noise reduction' which has been mentioned on here before, it seemed to have worked for some people.
So i noticed that i get call echo on all jellybean roms no matter if they are touchwiz or not...frustrating
whytechapel_x said:
So i noticed that i get call echo on all jellybean roms no matter if they are touchwiz or not...frustrating
Click to expand...
Click to collapse
Keep in mind the Touchwiz jb roms are actually built off the leak for the Skyrocket. The same thing happened with ICS way back when and call echo was a rampant problem then as well. I don't recall if anyone really solved the problem before official ICS dropped for Hercules, but I know a lot of devs were working on it.
Call echo in stable AOSP based roms shouldn't be happening. That's what we're trying to correct here.
If you have the time (or are willing), go back to stock unrooted (so you get the radio and everything) and try flashing cm10 stable. Then report back and let us know if call echo still exists. I'm not trying to knock All Star roms, I am just trying to get to the root of your problem and that involves avoiding flashing a radio. As far as I can tell, the flashing of the radio is the biggest difference between your experience and mine.
monkeybuttons said:
Keep in mind the Touchwiz jb roms are actually built off the leak for the Skyrocket. The same thing happened with ICS way back when and call echo was a rampant problem then as well. I don't recall if anyone really solved the problem before official ICS dropped for Hercules, but I know a lot of devs were working on it.
Call echo in stable AOSP based roms shouldn't be happening. That's what we're trying to correct here.
If you have the time (or are willing), go back to stock unrooted (so you get the radio and everything) and try flashing cm10 stable. Then report back and let us know if call echo still exists. I'm not trying to knock All Star roms, I am just trying to get to the root of your problem and that involves avoiding flashing a radio. As far as I can tell, the flashing of the radio is the biggest difference between your experience and mine.
Click to expand...
Click to collapse
will do. but if i remember, i would still get call echo on aokp milestone 1
whytechapel_x said:
will do. but if i remember, i would still get call echo on aokp milestone 1
Click to expand...
Click to collapse
Have you tried any ICS based AOSP roms? Like cm9.1 or AOKP (I can upload the file for you if you want; it is no longer on goo.im). I think I kept ICS AOKP the longest of any rom.
I have searched via various keywords for days and have not found an answer to my problem yet. I have only run across one other post (on another forum) that describes exactly my issue and they are asking the exact same question I have with no response.
I am using the AT&T Samsung Galaxy S3. I have downloaded CM 10.0.0 stable d2att on several occasions (different computers even), verified the md5, and installed on my phone. I have used CWM, CWM Touch, and TWRP to install hoping it was an issue there. Regardless of what I have done, I have the same issue addressed below:
I make or receive a phone call. No problems answering a phone call when it comes in. However when I hang up, the screen immediately goes back to sleep (which seems to be normal for the Nexus after researching). However, if I press the power button after the call is ended, the screen does not turn on at all. The hardware buttons (menu and back) do light up however and they remain lit. Regardless of what I do my phone stays stuck in this mode unless I hold the power button for about 10 seconds or so and force it to reboot, at which point it operates normal with no issues until my next phone call.
Has anyone experienced this issue and if so did you find a way to resolve it that does not require rebooting the phone? Right now this is the only thing keeping me from using the ROM as my daily driver.
Imo, AOSP-based ROMs run best when coming from stock. I flash back to touchwiz the before flashing them. Not sure if you've tried this.
Also, I had some small issues with the exact same rom that kept me from making it my daily driver. If you want stability, I can vouch for AOKP 4.1.2. I'm in no hurry for 4.2 with this rom running so well with no bugs or glitches
xBeerdroiDx said:
Imo, AOSP-based ROMs run best when coming from stock. I flash back to touchwiz the before flashing them. Not sure if you've tried this.
Also, I had some small issues with the exact same rom that kept me from making it my daily driver. If you want stability, I can vouch for AOKP 4.1.2. I'm in no hurry for 4.2 with this rom running so well with no bugs or glitches
Click to expand...
Click to collapse
Thanks. Seems that it was destined not to work. Oh well. I was on TW nearly everytime. I will give AOKP a shot. Should like it equally as well because I prefer AOSP roms. I am assuming you restore nandroid stock...or do you odin flash?
aybarrap1 said:
Thanks. Seems that it was destined not to work. Oh well. I was on TW nearly everytime. I will give AOKP a shot. Should like it equally as well because I prefer AOSP roms. I am assuming you restore nandroid stock...or do you odin flash?
Click to expand...
Click to collapse
I don't think it matters but I usually restore my tw/stock nandroid because it's right there and I don't lose root.
When I flashed the rom im currently running, I formatted /system /data and battery. Not sure if you care or need that info, just passing it on as this device has run really well for me on this OS.
I also flashed the Nexus 4 camera/gallery and the TW clock. The aokp camera is lame-o, and controlling the alarms is easier on the TW clock.
If you can't find them on the forum here (where I got them), PM me your email and I will send you the zips if you are interested. I believe I flashed them both in cwm, wiped cache/dalvik and then adjusted permissions in root browser to rw-r-r
AOKP's 4.1.2 jellybean milestone 1 is still on goo.im
xBeerdroiDx said:
I don't think it matters but I usually restore my tw/stock nandroid because it's right there and I don't lose root.
When I flashed the rom im currently running, I formatted /system /data and battery. Not sure if you care or need that info, just passing it on as this device has run really well for me on this OS.
I also flashed the Nexus 4 camera/gallery and the TW clock. The aokp camera is lame-o, and controlling the alarms is easier on the TW clock.
If you can't find them on the forum here (where I got them), PM me your email and I will send you the zips if you are interested. I believe I flashed them both in cwm, wiped cache/dalvik and then adjusted permissions in root browser to rw-r-r
AOKP's 4.1.2 jellybean milestone 1 is still on goo.im
Click to expand...
Click to collapse
I actually downloaded the camera/gallery apk for 4.2 as well as the keyboard. Already installed and running. Prefer both over the 4.1.2 versions installed on AOKP and CM10. Thanks for the info.
Hey all -
I have a T-Mobile Galaxy SIII with TWRP, AOKP JB Milestone 5 and GooManager. I got a pop-up for AOKP JB Milestone 6 this morning, so I downloaded it and added that file, Lean Kernel 2.9 and gapps (latest that could be downloaded) to the flash list. I set my Dalvik cache to clear before flashing anything, then rebooted the phone to flash everything. Immediately after the flash, the phone seemed to reboot, but with a blank screen. After a while, the capacitive buttons on the front started working and when I plugged the phone into my computer the file transfer program popped up.
However ... at no point can I ever get anything to display on the screen. I've tried rebooting into recovery (volume up, home button, power button) and nothing. I don't really care about the data on my phone, I have proper backups of everything. But what I can't seem to do is get it to a point where I can recover it. What are my options here if rebooting into recovery doesn't work?
Thanks!
As an addendum, the phone is clearly booted into the OS. I have a blinking notification LED that indicates a new e-mail, and calls placed to the phone cause it to ring. I just can't see .... anything on it.
I was able to get into TWRP, somehow. I took out my T-Mobile SIM card and had it plugged into USB. I held down the recovery combo and then it booted up into recovery. It also displayed the Galaxy SIII white splash screen for the first time since the bad flash. What the hell.
chuffykow said:
I was able to get into TWRP, somehow. I took out my T-Mobile SIM card and had it plugged into USB. I held down the recovery combo and then it booted up into recovery. It also displayed the Galaxy SIII white splash screen for the first time since the bad flash. What the hell.
Click to expand...
Click to collapse
so was you able to use your phone again i say go back to a nandroid you have or flash a rom that you know works good on your phone without that white screen and trouble shoot from there that it very strange indeed if you get success with the other just try posting in the ROM thread that you flashed you could possibly get more help where it happened :good:
I went back to AOKP Milestone 5 after doing a full wipe. I saw a number of graphics changes in the Milestone 6 code review, so it's possible that had something to do with it. In any case, I'm no longer panicing
Does mr6 use the 3.4 kernel? If yes, then you were using the wrong version of leankernel.
Ya its all kernel related and user error.
Aerowinder said:
Does mr6 use the 3.4 kernel? If yes, then you were using the wrong version of leankernel.
Click to expand...
Click to collapse
mt3g said:
Ya its all kernel related and user error.
Click to expand...
Click to collapse
I assumed it was user error. I just wanted to lay out the steps I took, so I could get some help on a recovery path. I thought that a JB based ROM would work with any kernel that supports JB. Looks like I was wrong.
chuffykow said:
I assumed it was user error. I just wanted to lay out the steps I took, so I could get some help on a recovery path. I thought that a JB based ROM would work with any kernel that supports JB. Looks like I was wrong.
Click to expand...
Click to collapse
Nope, JB can be AOSP, TouchWiz, 4.1, 4.2, 4.2.2, 3.0 kernel, 3.4 kernel. Just need to read and make sure you know what you're doing before just doing it. That's why I frown at people being lazy (not just you) and not reading the forums and such, and just using apps to update and flash.
mt3g said:
Nope, JB can be AOSP, TouchWiz, 4.1, 4.2, 4.2.2, 3.0 kernel, 3.4 kernel. Just need to read and make sure you know what you're doing before just doing it. That's why I frown at people being lazy (not just you) and not reading the forums and such, and just using apps to update and flash.
Click to expand...
Click to collapse
Thank's for the condescension, I appreciate being called lazy. I might not have an encyclopedic knowledge of Everything Android, but between the knowledge I do have and the details I read on the AOKP release page, I saw nothing that indicated I _couldn't_ run LeanKernel, especially when it was only a point release on the same ROM I was previously using.
I had a look at the changelog that's available on their page. It's pretty lame. http://gerrit.sudoservers.com/#/q/status:merged,n,z that one will probably have the kernel info. A good rule of thumb is when you flash a new rom, wait until the kernel is up to date (release date). For instance, don't flash a 3/01 kernel on a 4/24 rom - wait for kernel update.
I don't recommend flashing anything with the 3.4 kernel right now. Even if you manage to pull off stability, it's still laggy and eating about 3x the battery it should. This goes for the custom kernels, too. I'll put up with stability issues, but can't deal with bad battery. Already bad enough as it is. Need my phone during the day and not near a charger.
chuffykow said:
Thank's for the condescension, I appreciate being called lazy. I might not have an encyclopedic knowledge of Everything Android, but between the knowledge I do have and the details I read on the AOKP release page, I saw nothing that indicated I _couldn't_ run LeanKernel, especially when it was only a point release on the same ROM I was previously using.
Click to expand...
Click to collapse
calm down lol, you could have read up any of the kernel threads that there are some compatible issues with kernels and roms right now.
Aerowinder said:
I had a look at the changelog that's available on their page. It's pretty lame. http://gerrit.sudoservers.com/#/q/status:merged,n,z that one will probably have the kernel info. A good rule of thumb is when you flash a new rom, wait until the kernel is up to date (release date). For instance, don't flash a 3/01 kernel on a 4/24 rom - wait for kernel update.
I don't recommend flashing anything with the 3.4 kernel right now. Even if you manage to pull off stability, it's still laggy and eating about 3x the battery it should. This goes for the custom kernels, too. I'll put up with stability issues, but can't deal with bad battery. Already bad enough as it is. Need my phone during the day and not near a charger.
Click to expand...
Click to collapse
Thanks for the tip! I appreciate it.
I tried to post this on cyanogen mods website but I was not allowed to post
I bought a AT&T Galaxy S III for my wife this weekend and ran into several problems installing cyanogenmod 10 on it.
Installing:
First the Heimdall program failed to "initialize interface" and no matter what I tried it failed to connect.
I managed to get it installed by using the ODIN to flash different clockwork mod (but that errored out on the when I went to flash cyanogenmod 10 )
So I used that to root it then installed cyanogenmod via rom manager by having that install the right clockwork mod then cyanogen 10.
It would be nice if they provided a ODIN Image for cyanogenmod
VoiceMail:
voicemail was missing its number after I installed cyanogen mod.
It took me forever to get this correct. Found out that you just forward to your mobile number. In the phone settings. or dial **004*PhoneNumber#
Also Google voice failed to setup correctly as well and had to use the **004 path.
Skype:
downloading via google play kept returning "package file invalid" (I cleared /cache and dalvik cache still failed) I ended up downloading it via the androiddrawer website and it installed (sideload?).
The problem with this is when using the voice or video chat the other side just hears very load static. Found someone claiming these problems came from cyanogenmod 10 not using the correct mics all the time. This is still an issue.
My questions are these issues fixed in the most recent version of Cyanogen the M releases? And if not are they known and someone working on them?
And does anyone have a fix for the static issue in skype?
JonoPorter said:
I tried to post this on cyanogen mods website but I was not allowed to post
I bought a AT&T Galaxy S III for my wife this weekend and ran into several problems installing cyanogenmod 10 on it.
Installing:
First the Heimdall program failed to "initialize interface" and no matter what I tried it failed to connect.
I managed to get it installed by using the ODIN to flash different clockwork mod (but that errored out on the when I went to flash cyanogenmod 10 )
So I used that to root it then installed cyanogenmod via rom manager by having that install the right clockwork mod then cyanogen 10.
It would be nice if they provided a ODIN Image for cyanogenmod
VoiceMail:
voicemail was missing its number after I installed cyanogen mod.
It took me forever to get this correct. Found out that you just forward to your mobile number. In the phone settings. or dial **004*PhoneNumber#
Also Google voice failed to setup correctly as well and had to use the **004 path.
Skype:
downloading via google play kept returning "package file invalid" (I cleared /cache and dalvik cache still failed) I ended up downloading it via the androiddrawer website and it installed (sideload?).
The problem with this is when using the voice or video chat the other side just hears very load static. Found someone claiming these problems came from cyanogenmod 10 not using the correct mics all the time. This is still an issue.
My questions are these issues fixed in the most recent version of Cyanogen the M releases? And if not are they known and someone working on them?
And does anyone have a fix for the static issue in skype?
Click to expand...
Click to collapse
Unless your wife can troubleshoot issues why install a custom ROM on her phone. My wife would kill me since she has no clue but I digress.
Why not flash 10.1 on the phone and download the gapps from the goo.im site and see if hat helps your issues. Maybe you got a bad flash and/or download. For the short amount of time I tried it I didn't have any of these issues you do. Those don't seem to be any bugs in the known bugs beyond maybe the static. Task's AOKP is another one to try if you want a custom stable rom.
Try another ROM or maybe a fairly stock rooted rom and see if that clears up any issues.
Are you using a Mac or a PC ? You mentioned Odin (for windows PC's) and heimdall (for all others). Honestly the best way is to flash a stock rooted ROM from the no tripping flash counter Rooting thread in Development and then flashing CWM in rom manager. Limiting having to flash in odin is the far better option. I've never ha d a bad flash in a custom recovery but everytime I have to use Odin I get extremely nervous.
Read Beerdroid's guide and you can't go wrong
hednik said:
Unless your wife can troubleshoot issues why install a custom ROM on her phone. My wife would kill me since she has no clue but I digress.
Why not flash 10.1 on the phone and download the gapps from the goo.im site and see if hat helps your issues. Maybe you got a bad flash and/or download. For the short amount of time I tried it I didn't have any of these issues you do. Those don't seem to be any bugs in the known bugs beyond maybe the static. Task's AOKP is another one to try if you want a custom stable rom.
Try another ROM or maybe a fairly stock rooted rom and see if that clears up any issues.
Are you using a Mac or a PC ? You mentioned Odin (for windows PC's) and heimdall (for all others). Honestly the best way is to flash a stock rooted ROM from the no tripping flash counter Rooting thread in Development and then flashing CWM in rom manager. Limiting having to flash in odin is the far better option. I've never ha d abad flahs in a custom recovery but everytime I have to use Odin I get extremely nervous.
Click to expand...
Click to collapse
agreed.
there are a couple good and stable stock/touchwiz custom roms as well as AOSP-based roms on this forum. i would steer clear of nightlies and super-custom roms that are always posting new updates. these are less stable imo.
put something on her phone thats solid and be sure to use the proper wiping and flashing procedures when you do so. wiping/flashing correctly makes ALL the difference on the software's performance while it's running on a device
xBeerdroiDx said:
agreed.
there are a couple good and stable stock/touchwiz custom roms as well as AOSP-based roms on this forum. i would steer clear of nightlies and super-custom roms that are always posting new updates. these are less stable imo.
put something on her phone thats solid and be sure to use the proper wiping and flashing procedures when you do so. wiping/flashing correctly makes ALL the difference on the software's performance while it's running on a device
Click to expand...
Click to collapse
Well I went with Cyanogen because I used it on my old droid incredible and its was great. I also want a stock like rom because I personally use a stock Nexus 4 and want my wifes phone to be similar and wanted to remove all the retarded extra apps atnt and samsung threw on.
So no idea if the 10.1 would fix the static issue then?
JonoPorter said:
Well I went with Cyanogen because I used it on my old droid incredible and its was great. I also want a stock like rom because I personally use a stock Nexus 4 and want my wifes phone to be similar and wanted to remove all the retarded extra apps atnt and samsung threw on.
So no idea if the 10.1 would fix the static issue then?
Click to expand...
Click to collapse
I can't say for sure but download and see if it works out of you. Thing with bugs is that they aren't always reproducible. I don;t see your issue as a known bug on 4.2.2. There are a few other ROM like super nexus in the dev section that are a practically stock nexus feel. Why not give that one a try ? Give AOKP a try as well.
Here's super nexus:
http://forum.xda-developers.com/showthread.php?t=2219944
hednik said:
I can't say for sure but download and see if it works out of you. Thing with bugs is that they aren't always reproducible. I don;t see your issue as a known bug on 4.2.2. There are a few other ROM like super nexus in the dev section that are a practically stock nexus feel. Why not give that one a try ? Give AOKP a try as well.
Here's super nexus:
http://forum.xda-developers.com/showthread.php?t=2219944
Click to expand...
Click to collapse
i'm an advocate of AOKP, but thats just my 2 cents. there is a very solid 4.1.2 milestone out and their 4.2.2 milestone will be released very soon.
although faryaab is a great kid and puts some good stuff together, remember that supernexus is a port and you could experience bugs (as i did). again, just my opinion
ok, i just got a captivate glide from my gf, ive been looking into flashing and rooting for about 3 months, but i JUST got an android (ik so behind) but originally i was looking into sidekick 4g for keyboard but this worked too in my eyes and it was free so i figured why not, but either way i wanted to root and flash, but now im at a barricade that im not sure if to continue or not, i rooted using one of the threads directions
this one to be exact
http://forum.xda-developers.com/showthread.php?t=1378082
i ran into a barricade here at first, the initial set up wouldnt run, i fixed that by doing the Vol. Down plus Power recovery mode i think its called, and clearing memory then rebooting and it worked fine, i was rooted and had the super user app as well (some boxes from widgets were invosible like accuweather and the android assistant thing but, thats ok).
ok next step i knew if i was supposed to try to flash a rom i should back up EFS which i did with some difficulty (such as figuring out i needed busybox lol)
ok now my next step was installing ROM manager by clockworkmods
NOW onto the actual part i need help with that i couldnt figure out myself (and excuse me for being newbish here too as i dont know much but im not bad with tech either but i felt i damn near bricked the phone in the process already so i WANT to continue with guidance before i do anything else)
now that im rooted, now that everythings backed up on my computer and ive got rommanager and everything
what now
will i still be rooted once i flash a rom? will i still have busy box, super user, all of that stuff? (as the thread i rooted with clearly said that was flashing a rooted rom)
and theres some other personalization questions i need help with too but thats more towards once ik what direction im going in
and uh.. not sure if it matters but im on metropcs service, so occasionally i get issues if i have to reset the phone at all as i have to change the ANP or ADP cant remember the acronym but ive got to change it from some t-mobile one to the metropcs one, i dont see why that would matter but, its a just in case emasure, also im using the ATT one not rodgers (not even sure what rodgers is tbh)
EDIT: OH one last thing. the rooted rom is gingerbread.. thats my main reason for wanting to change it.. i want kitkat, or would prefer kitkat, but id like some opinions as well on what perhaps the best ROM would be, im not sure between omni-rom and cyanogynmod which are the main ones im looking into, but, again, get more into that later
ok now
now im looking through the Rom info.. and.. im starting to wonder.. is it even worth it?
what sacrifices am i going to be making if i flash a custom? what all can i change without flashing a custom? and can i still get kitkat without screwing up my root (KIES?? or ODIN??) its just the things like this that make me wonder... i want the root, that much i DO know, theres so much i can do with rooting im seeing this and enjoying this, but i just need some type of guidance as to what to do, and if theres a better place for this thread please feel free to move it as i do see that it might be ok to have under general ndroid questions, but, i wasnt all too sure on it as this isthe phone im using so any issues deriving from the phone type might screw someone up
Most of the custom roms are rooted already.
There is only 4.0 official, no kitkat. We dont have odin custom images, nor KIES. You must wipe your data, system, boot parition, install KK means clean phone for you.
I think KK is better then official, but it has some limitation.
bubor said:
Most of the custom roms are rooted already.
There is only 4.0 official, no kitkat. We dont have odin custom images, nor KIES. You must wipe your data, system, boot parition, install KK means clean phone for you.
I think KK is better then official, but it has some limitation.
Click to expand...
Click to collapse
ok.. im confused then, cause i had kitkat on it when i used kies to update firmware, or atleast i thought i did, perhaps because both had 4 and i was sleepy i was confused lol, and sorry but if KK doesnt mean KitKat then what does it mean. and how high will a custom Rom take me in terms of lining up with official, just to ice cream sandwich?. and.. cyanogenmod, ive been tempted to get it but.. im not sure exactly which one to get because when i was on the site i only found captivate in the devices not captivate glide
EDIT: one more thing, as far as wiping the phone clean and starting over, what do i use.
and of course if you say the rest are rooted, then whats one of the best kernels and roms to use then, its true i want atleast ICS on here, so.. if im right i looked up KK, do you mean KKlauncher the app?
well...
ok i soft bricked my phone, it just shut down in middle of installing some fonts, and for some reason i cant restore it even tho i created a back up as it advised me to do so, i get errors in CWM recovery,
now im about to just do this
using this as a sort of reference so people can keep track of me if something else happens that i mess up..
http://forum.xda-developers.com/showthread.php?t=1890125
miseryvein said:
ok.. im confused then, cause i had kitkat on it when i used kies to update firmware, or atleast i thought i did, perhaps because both had 4 and i was sleepy i was confused lol, and sorry but if KK doesnt mean KitKat then what does it mean. and how high will a custom Rom take me in terms of lining up with official, just to ice cream sandwich?. and.. cyanogenmod, ive been tempted to get it but.. im not sure exactly which one to get because when i was on the site i only found captivate in the devices not captivate glide
EDIT: one more thing, as far as wiping the phone clean and starting over, what do i use.
and of course if you say the rest are rooted, then whats one of the best kernels and roms to use then, its true i want atleast ICS on here, so.. if im right i looked up KK, do you mean KKlauncher the app?
Click to expand...
Click to collapse
I mean KK is kitkat. I dont know what did you read, but there is ICS the last official.
Cyanogenmod and other custom roms has own official support, that what you can download rom their site. We dont have official support from them, you cant download those roms from there. You can found download link in rom's threads.
Start reading here: http://forum.xda-developers.com/showthread.php?t=2623635
I preffer CM11, but yon can found many other KK roms.
If you brick you randroid, just reinstall same you had.
bubor said:
I mean KK is kitkat. I dont know what did you read, but there is ICS the last official.
Cyanogenmod and other custom roms has own official support, that what you can download rom their site. We dont have official support from them, you cant download those roms from there. You can found download link in rom's threads.
Start reading here: http://forum.xda-developers.com/showthread.php?t=2623635
I preffer CM11, but yon can found many other KK roms.
If you brick you randroid, just reinstall same you had.
Click to expand...
Click to collapse
hell i got it back on default ICS now lol, i screwed it up XD and yea ik you guys dont have the downloads your selves but the links and guidance of what i should be doing is basically what i was after ill look at the link you gave me, i think im going to chill out with the flashing right this second, but ill pick it back up later im sure, i atleast liked the cpu setting apps. made my battery last much longer and for what time it lasted i loved it
ok another thing im concerned with is alot have bugs that are deal breakers for me, such as messing up the keyboard (the whole reason i have this phone)
and looking through it i do like CM11 too
but looking at your post
http://forum.xda-developers.com/showthread.php?t=2588304
can you explain what you mean by the fixed rotation and skype issues,
and perhaps is there a full feature list somewhere? thats one big thing i want to look at if possible, i usually just keep seeing bug fixes on any ROM
Voip apps (skype,vibert etc) have strange sound, only temporaly fix exists.
When you take a picture with camera, it has fix rotation, I dont remember witch position is the fixed one, but you make photos with different rotation, the picture will be rotate 90/180/270, and you must fix the image.
Most importan bug are: phone call sound doesnt work with BT devices, and voip sound is buggy.