Related
Heres the main question at hand before you read my large summary.
1) Why is my ROM's boot image looping constantly?
2) Do I have to NAND again if I revert to a nandroid backup that was made before I nand'ed my phone?
Time for the long, and mostly pointless, summary:
I'm pretty desperate to get things running on a Gingerbread ROM, if you didn't notice in my last topic 2 hours ago.
Anyways, I'm trying to get cyanogenmod7, Stock Gingerbread 2.3.1, or heck, even eVOKINGS-gingerbread ROM to work.
So far, i've tried Cyanogenmod7 and Stock Gingerbread 2.3.1 on my evo; none of which have worked past the boot screen.
Lets take stock gingerbread for example:
I downloaded the new cyanclockwork recovery rom off of rom manager and flashed it after a *long* process of nand'ing and rooting again.
Then, I powered down, booted up, and went straight into recovery in the bootloader. I went to install ROM from SD->chose the .zip .
after waiting for awhile, it said the upgrade was complete (upgrade?)
*notice: the installation bar didn't move at all durring the installation process, if that makes a difference
I rebooted, and was greeted by the HTC screen while it spelt out q-u-i-e-t-l-y-b-e-a-u-t-f-u-l
Nothing happens after that.
It just shows the HTC screen again, getting stuck at the B in beautiful. Pretty much just looping over-and-over again.
Same thing happened for Cyanogenmod7, I was constantly being looped through the skateboarding-droid figure.
I'm doing something wrong here obviously, because all these ROM's have screen captures from a EVO 4G.
Does it make a difference if I use Clockwork recovery 3.0.0.7/6/5? or 2.6.7?
Please help.
I know all my questions are rather long and complicated, but im sick of being ignored at every forum (ubuntu forums, black ops, etc.)
Or I'm impatent and overestimated your forums activenes. No disrespect to the forums or devs (I thought your forum was really active)
Edit: If I for some reason can't get a 2.3.1 ROM to work, would someone kindly point me to a stable Froyo ROM they think is the best?
Have you use amo-ra?
Sent from my evil evo!!
rsjc741 said:
Heres the main question at hand before you read my large summary.
1) Why is my ROM's boot image looping constantly?
2) Do I have to NAND again if I revert to a nandroid backup that was made before I nand'ed my phone?
Time for the long, and mostly pointless, summary:
I'm pretty desperate to get things running on a Gingerbread ROM, if you didn't notice in my last topic 2 hours ago.
Anyways, I'm trying to get cyanogenmod7, Stock Gingerbread 2.3.1, or heck, even eVOKINGS-gingerbread ROM to work.
So far, i've tried Cyanogenmod7 and Stock Gingerbread 2.3.1 on my evo; none of which have worked past the boot screen.
Lets take stock gingerbread for example:
I downloaded the new cyanclockwork recovery rom off of rom manager and flashed it after a *long* process of nand'ing and rooting again.
Then, I powered down, booted up, and went straight into recovery in the bootloader. I went to install ROM from SD->chose the .zip .
after waiting for awhile, it said the upgrade was complete (upgrade?)
*notice: the installation bar didn't move at all durring the installation process, if that makes a difference
I rebooted, and was greeted by the HTC screen while it spelt out q-u-i-e-t-l-y-b-e-a-u-t-f-u-l
Nothing happens after that.
It just shows the HTC screen again, getting stuck at the B in beautiful. Pretty much just looping over-and-over again.
Same thing happened for Cyanogenmod7, I was constantly being looped through the skateboarding-droid figure.
I'm doing something wrong here obviously, because all these ROM's have screen captures from a EVO 4G.
Does it make a difference if I use Clockwork recovery 3.0.0.7/6/5? or 2.6.7?
Please help.
I know all my questions are rather long and complicated, but im sick of being ignored at every forum (ubuntu forums, black ops, etc.)
Or I'm impatent and overestimated your forums activenes. No disrespect to the forums or devs (I thought your forum was really active)
Edit: If I for some reason can't get a 2.3.1 ROM to work, would someone kindly point me to a stable Froyo ROM they think is the best?
Click to expand...
Click to collapse
I'm pretty sure you will still have nand unlocked. The only way you wouldn't is if you unroot.
Sent using my EVO running AZRAL X V 3.1
klquicksall said:
I'm pretty sure you will still have nand unlocked. The only way you wouldn't is if you unroot.
Sent using my EVO running AZRAL X V 3.1
Click to expand...
Click to collapse
Thanks
I should face-palm myself. I just read the sticked post and I'm going to try some of his suggestions. He pointed out why cyanogenmod wouldn't work.
My whole consept of the framework went out of the window, and now I think of it more like a standard linux distro, in terms of kernel->ROM relationship.
I don't think I need to have a custom kernel for the Gingerbread beta-4, but i'll look it up just in case... Though I don't have a clear idea on how to flash that.
And to the person 2 above, im using Cyanclockwork. For whatever reason, I like its design verse RA recovery. I might try RA recovery just to see if it works better, as everyone has said it does.
I think i needed to clear all my caches and then load the ROM.
So I did a wipe of everything (data, darvik, cache) and trying to install the GB ROM. My boot screen is *still* looping. Do I need to get another kernel? Is it like flashing a ROM? Where are they at? I didn't see any in the software section...
Ok... here's the deal. I just decided to switch roms finally to see what is new out there. I had been running an old version of Uber Kingdom. Here is the problem I am having. It is boot looping. Relatively simple problem to fix usually. But wait, there's more! It is boot looping in every single rom I install. Sometimes it won't boot to clockwork properly either and I have to pull the battery. Is there someway I can fix this? Or is this a hardware problem (which I kind of doubt)? I just don't understand what the heck is going on. I have been flashing different roms left and right for the past few hours trying to get this thing to stabilize. Sometimes it will boot up into the rom, I will get mostly through the google accounts setup, and then it will restart, and then loop. Other times it won't even get past the white incredible screen, and then sometimes it will make it into the rom splash screen. I have attempted to install CM7 nightly, Uber kingdom, and Synergy so far. I can flash the new rom, I can mount the SD card in clockwork, but then it begins to loop again as soon as I leave clockwork.
Let me know if you need any other information.
Is there a way to just completely redo EVERYTHING, clockwork, rom, everything, just to make sure I have a nice clean slate?
Thanks a ton for reading through this novel. I am extremely frustrated.
~Will
PS, I may not get back to this thread until morning. I have to get to sleep for work. Sorry if I don't respond right away to information requests. Thanks again!
If you can mount the SD card, download the stock RUU from www.dougpiston.com, put it on the root of the SD card named exactly PB31IMG.zip, and boot into hboot to install it. Your phone should be restored to stock, a clean slate.
Tried a different SD?
Sent from my ADR6300 using XDA Premium App
How are you downloading and flashing the ROM? I had this problem when trying to do everything through Rom Manager. Even trying to flash in recovery with a ROM downloaded through ROM Manager would loop.
Update
Well, I was just getting ready to flash the original RUU when I tried one last time to restore my old Uber rom setup and it worked (whereas the last 3 times of doing exactly the same process didn't). It stopped looping at least, even though I am still running the same rom I was before. I think tonight I am still going to attempt to flash the RUU anyway and start over anew.
To answer the questions before, No, I did not try a different SD. I didn't know it could make that much difference. Still on the original one that came with the phone.
As the downloading and flashing process goes, I was downloading direct from the XDA forums on my laptop, then transferring the files via USB. I have never really liked using the Rom Manager. It cuts me out of the XDA loop and I don't get to see all the bleeding edge discussions, etc...
So I will try to flash everything new tonight, and then post my results for anyone who is curious. Thanks for the help guys!
hey guys!
i will realy appriciate any help on this one:
i am in a light panic attack as i might bricked my first phone..
today i have updated my t989 to ics 4.0.4 via kies, and then rooted it.
of course the root was so i can flash a rom. i chose to try cm9.
any ways, in order not to get the phone stuck in boot loop, i have tried to install the touch version of the cwm recovery.
i did it through the zip on sd option.
the version i used was: CWM6013-TOUCH-CM9-recovery (file size 4.201)
it seemed ok at first.
but then when i retsrted the phone, i noticed that every app i am trying to launch takes forever to respond (about a minute)...
i have tried to do factory reset and it did not help - the phone was sluggish even on the first setup screens..
now i am in the process of downloading the stock version again, to unroot. is this the way to go? did i miss something?
please let me know what info i can provide so you will be able to help me.
again, and i can't say it enough: every help will be very much appreciated. so, did i brick my phone?
thanks!
cvbn
Dude wrong section.
cvbn52 said:
hey guys!
i will realy appriciate any help on this one:
i am in a light panic attack as i might bricked my first phone..
today i have updated my t989 to ics 4.0.4 via kies, and then rooted it.
of course the root was so i can flash a rom. i chose to try cm9.
any ways, in order not to get the phone stuck in boot loop, i have tried to install the touch version of the cwm recovery.
i did it through the zip on sd option.
the version i used was: CWM6013-TOUCH-CM9-recovery (file size 4.201)
it seemed ok at first.
but then when i retsrted the phone, i noticed that every app i am trying to launch takes forever to respond (about a minute)...
i have tried to do factory reset and it did not help - the phone was sluggish even on the first setup screens..
now i am in the process of downloading the stock version again, to unroot. is this the way to go? did i miss something?
please let me know what info i can provide so you will be able to help me.
again, and i can't say it enough: every help will be very much appreciated.
thanks!
cvbn
Click to expand...
Click to collapse
What all did you do to install the ROM?
Something like this happened to me on my original Galaxy S when I updated it via Kies to the new stock version. Everything was running extremely sluggish. I don't remember what I ended up doing to fix it but I most certainly did not keep the stock update on there. I rebooted it and let it sit for about 30mins and then rebooted it again and tried using it. It was a bit better but still not good so I just flashed another Rom and then it was lightning quick.
The good news is you didn't brick it if you can still boot up and run stuff. I'd suggest updating your recovery to TWRP as that seems to be the preferred one now a days, it's the one I've been using to flash countless Roms without any problems, and most Devs recommend it. Apart from that, follow the install instructions precisely and you shouldn't have a problem. To be sure, after upgrading your recovery to TWRP, you could do the wipes (cache/dalvik/factory reset/system) 2-3 times before installing your new Rom, that seems to help some people coming from previous troublesome Roms.
I've noticed a few problems people seem to have around here come from the recovery, mainly those not using TWRP and/or using some form of outdated or beta CWM. Hopefully you can fix your problem, I know first hand how awful that sluggish feeling is. Good luck!
Right. Here we go.
Yesterday, I used HTC devtool and easy ace tool to be rooted and unlocked bootloader. Im still S-On. Ace Pvt Hboot.
Had all sorts of problems. Firstly, with PacMan, which looked and worked fantastic, except no GPS lock, AT ALL, (important to me) soi tried Jellytime and CFX, but all three had issues, and GPS worked on none. I believe this is because the radio is the original one, but dont have the knowledge, skill, or importantly courage to flash an updated radio.
So, tried to flash and EXT4 recovery, with the tool from Google Play. Will not work. Saves to a folder on SD but still boots in CWM recovery So I cant use EXT roms properly. I tried to go back to PacMan, but I cant even do that. I wipe and format, and reflash the boot image, but every time it wont load correctly - something ddoesnt work, and I get errors. Latest was Android Keyboard is not working, so I cant do anything!
Attempted to put ViperDHD rom on to go back to something like stock (GPS worked great on stock!!) and worked ok, with some funny issues on initial boot but settled down. But, STILL no GPS.
Decided stuff it, go back to stock . Downloaded stock RUU and attempted to install, but, of course, it wont work.
So, in short, I have a fantastic Desire HD, that wont flash EXT4, wont go back to stock on RUU, and I cannot find a ROM that will work with GPS. On some, wireless doesnt work either.......
So, if someone could help me to either make my GPS work on ICS or Jellybean, or, help me go back to where I was, (GPS working!!) before I started all this, I'd be eternally grateful. I dont have money to spend on a new phone, so I'll even put some money in your development coffers as a thankyou for helping me out. I just need me smartphone to be smart again, not the useless pile of Sh*te it is right now
My previous post about lack of GPS proved fruitless, no replies. BUt I am hoping that one of you Desire HD gurus will rise to the challenge that I face right now and help. I cant but you a beer, I cant do much at all, but of you help me fix my problem I will, I promise, be eternally grateful. I'll even send your missus flowers by Interflora if that helps!!!:silly: Seriously, I really need someone who knows there stuff to give me a hand out of a hole.
My thanks in advance.
Phil
Hey there. Seems like you've gotten yourself into quite a little mess there.
First of all, I'd recommend you flash BlackICE. Its a Gingerbread based ROM but I know for 250% fact that it is rock solid and the GPS works.
After that, I believe you're going to have to manually flash the recovery using fast boot (hit up the link for the Ace Think Tank in my signature for guides and any additional help you might need)
Finally, another bulletproof ROM I recommend is IceColdSandwich. I personally know that this ROM is 100% stable and that the GPS works.
If you need any additional assistance, feel free to post in the Ace Think Tank. And as always, be sure to drop a thanks if I helped or anyone else helps!
Edit: ViperDHD isn't based on stock my friend. Its based on the One V stock ROM as far as I know, so its been ported from that. An amazing stock based ROM is Android Revolution HD, which I've tested personally and found to be bloody amazing!
Also, the RUU won't flash as you'll have to relock your boot loader. Use fast boot to to that if you still want to return to stock
Edit 2: also. Please refrain from creating multiple threads. I know its tempting but the desire HD is slipping into the legacy stage, where I treat and development is slowing down. If you must get an answer quick, either 'bump' your thread (simply post the word 'bump' and it'll push it to the top of the list, so it'll show as unread. Be aware that you can only do this once every 24 hours) or post in the Ace Think Tank.
Thanks
- Sent from Guy's Super Duper S3
GuyInTheCorner said:
Hey there. Seems like you've gotten yourself into quite a little mess there.
First of all, I'd recommend you flash BlackICE. Its a Gingerbread based ROM but I know for 250% fact that it is rock solid and the GPS works.
After that, I believe you're going to have to manually flash the recovery using fast boot (hit up the link for the Ace Think Tank in my signature for guides and any additional help you might need)
Finally, another bulletproof ROM I recommend is IceColdSandwich. I personally know that this ROM is 100% stable and that the GPS works.
If you need any additional assistance, feel free to post in the Ace Think Tank. And as always, be sure to drop a thanks if I helped or anyone else helps!
- Sent from Guy's Super Duper S3
Click to expand...
Click to collapse
Thanks for coming back to me mate, it is greatly appreciated.
Ok, deep breath, and after my above and considering your reply, I ihave flashed an EXT4 recovery from Fastboot, but, this will not load. Goes to HTC screen and stops. Im sure I can put it right with EasyAce which I will try now.
I will try then to put Black ice on as you advised and post back.
really appreciate your advice!
addictR3 said:
Thanks for coming back to me mate, it is greatly appreciated.
Ok, deep breath, and after my above and considering your reply, I ihave flashed an EXT4 recovery from Fastboot, but, this will not load. Goes to HTC screen and stops. Im sure I can put it right with EasyAce which I will try now.
I will try then to put Black ice on as you advised and post back.
really appreciate your advice!
Click to expand...
Click to collapse
Seems I cant boot into a recovery at all now. Tried to reflash with EasyAce tool but getting errors. I dont have a working recovery, so cant flash a rom
Ok, somehow, via the red wine and stress induced fog, I managed to get EXT recovery working. Im now tryig to get a rom working. Tried PacMan again, bit straight off I get AOKP keyboard not working error and I didnt have to go through the Google setup - why cant I get a clean boot - this confuses me?? I wipe Cache, Dalvik. Factory reset - same problem. I have even tried formatting system from Advanced - same????
At least I can flash RIMs now!!
Thanks again for your help
You are still s-on yes?
Have you flashed boot.IMG?
If you are s-on you must flash the boot.IMG (contained inside the ROM's zip file) using a PC and "fastboot flash boot boot.img" every time you change to a new, different ROM.
Sent from my GT-I9505 using xda app-developers app
I have indeed mate, one thing I learned early on.
I have managed to get JellyTime on ok, but, again, no gps and also the potentiometer for the compass etc appears to not work!! Arrrrrgh!!!!
I think the issue must be the radio. Can I flash a new radio if im S-On and bootloader unlocked? Im ok with fastboot stuff if I need that to push a radio, but, I read that flashing a radio is inherently more "dangerous" than flashing the recovery etc.
I hoped the EXT4 recovery would make a difference, but seems not to have at all. FWIW, I also did the GPS antenna mod yesterday, and it hasnt helped either. My gps appears to work, but its very poor. I left it outside for 10 mins last night looking up at clear sky and it didnt show one satellite.
Think it might be time to sell the phone
You need to be S-Off to flash a radio.
I still cant get my head around why I cant get PacMan back on ok? It worked a treat first time, except for gps. Now, it will not install properly at all. It boots ok, but straight away I get keyboard has stopped working, and it doesnt go through the account setup etc.
But the potentiometer works!!!!!
Where I am at now.
Put CWM recovery back on, and tried Cyanogen 7.1. Would not boot. Several attempts at wipe and reflash did not cure this. So I am now running Android Revolution HD7.3. I thought as it was close to a stock ROM it may work, but, still no joy.
I put other halfs Desire HD next to mine and started the GPS on them both. Hers locked in less than a minute. Half an hour later, I had seen one brief flicker of two satellites on mine, Still no fix.
So, I dont know what to do really. I ish I could put the phone back to how it was, but doesnt look like that is going to be an option. Tried the RUU, but it doesnt work
I still cannot understand why none of these roms will work with the GPS when it was perfect before on stock 2.3.5??
What's wrong with the RUU? I would try flashing a fresh recovery image from fastboot, then wiping everything under the sun and flashing ARHD again.
Hello everyone,
I really need your help with my wife's Metro PCS Samsung GS4 M919N.
The thing is, we are now living outside the US so I had to unlock her phone. After ordering the unlock codes, I decided to root the phone and use a custom ROM while waiting for the codes.
That is why I found this guide here: androidforums.com/metropcs-galaxy-s4-all-things-root/790899-metropcs-galaxy-s4-all-things-root-guide.html
So while reading the guide, I aimed to have the following accomplished at the end:
Recovery: TWRP
Custom ROM: CyanogenMod 10.2.1
I then started doing the guide for the TWRP recovery by using Odin. I got the message saying that the flashing passed and went ahead to restart to recovery to install CM 10.2.1 as a custom ROM. The thing is that I keep on restarting to the stock recovery not TWRP. So I went to YouTube and found a video showing how to flash TWRP using GooManager. After following that guide, I went to restart to recovery and I successfully got into TWRP.
Now, to achieve my goal, all that's left to do is to flash CyanogenMod 10.2.1 (jfltetmo).
Before doing that, I decided to make a backup. After using TWRP to do a backup, I proceeded to installing the custom ROM + gapps (wiped with the default settings). Everything was working I think (I handed the phone to my wife so she was he one testing it). After some time, she decided she wants the stock ROM instead so I decided to download the androidforums.com/metropcs-galaxy-s4-all-things-root/783769-rom-recovery-flash-able-stock-m919nuvuamf2-rooted-deodexed-rom.html ROM.
I flashed the newly downloaded ROM + gapps (same file). This time, I couldn't get the gapps to work probably because it was meant for another version. So I decided to just restore from the backup I created earlier.
So, the usual stuff. Wipe. Restore. Restart.
Seems to be going smoothly because my wife was happy to see the old ROM she was used to.
Until the phone started to restart on it's own. (It's pretty much downhill from here on out).
At first I thought it was just a random thing that probably would never happen again. I was wrong as it became more frequent as days went by.
Recently I can't just restart the phone, I would have to remove the battery and then restart it. Now, it's getting really hard to restart the phone. Please help me fix this. I prefer to leave the phone rooted, but if the fix unroots the phone then so be it, anyway my wife prefers the stock ROM so only the unlocking was necessary.
Metro PCS Samsung Galaxy S4 M919N
Recovery:
TWRP 2.6.3.1
ROMs:
Stock Metro PCS
CyanogenMod 10.2.1
Let me know if you need more information from me. Hopefully I can restart the phone so I can give you some version numbers.
Thanks everyone!
I didn't read everything but just wanted to say
VERY GOOD THREAD!
this is how threads should be done. Very descriptive, organized, told us everything you did and asked for help! Good job man! Only negative is it prolly should have gone in Q&A section but irregardless very good thread!
About your issue, I recommend flashing stock Odin tar file to everything back to stock and reroot and start over. Flashing stock will not lock it again it will remain unlocked. But should get you back up and fresh. Just be aware it will erase all your data and all of the internal SD card.
Sent from my SGH-M919 using Tapatalk
dokgu said:
Hello everyone,
I really need your help with my wife's Metro PCS Samsung GS4 M919N.
The thing is, we are now living outside the US so I had to unlock her phone. After ordering the unlock codes, I decided to root the phone and use a custom ROM while waiting for the codes.
That is why I found this guide here: androidforums.com/metropcs-galaxy-s4-all-things-root/790899-metropcs-galaxy-s4-all-things-root-guide.html
So while reading the guide, I aimed to have the following accomplished at the end:
Recovery: TWRP
Custom ROM: CyanogenMod 10.2.1
I then started doing the guide for the TWRP recovery by using Odin. I got the message saying that the flashing passed and went ahead to restart to recovery to install CM 10.2.1 as a custom ROM. The thing is that I keep on restarting to the stock recovery not TWRP. So I went to YouTube and found a video showing how to flash TWRP using GooManager. After following that guide, I went to restart to recovery and I successfully got into TWRP.
Now, to achieve my goal, all that's left to do is to flash CyanogenMod 10.2.1 (jfltetmo).
Before doing that, I decided to make a backup. After using TWRP to do a backup, I proceeded to installing the custom ROM + gapps (wiped with the default settings). Everything was working I think (I handed the phone to my wife so she was he one testing it). After some time, she decided she wants the stock ROM instead so I decided to download the androidforums.com/metropcs-galaxy-s4-all-things-root/783769-rom-recovery-flash-able-stock-m919nuvuamf2-rooted-deodexed-rom.html ROM.
I flashed the newly downloaded ROM + gapps (same file). This time, I couldn't get the gapps to work probably because it was meant for another version. So I decided to just restore from the backup I created earlier.
So, the usual stuff. Wipe. Restore. Restart.
Seems to be going smoothly because my wife was happy to see the old ROM she was used to.
Until the phone started to restart on it's own. (It's pretty much downhill from here on out).
At first I thought it was just a random thing that probably would never happen again. I was wrong as it became more frequent as days went by.
Recently I can't just restart the phone, I would have to remove the battery and then restart it. Now, it's getting really hard to restart the phone. Please help me fix this. I prefer to leave the phone rooted, but if the fix unroots the phone then so be it, anyway my wife prefers the stock ROM so only the unlocking was necessary.
Metro PCS Samsung Galaxy S4 M919N
Recovery:
TWRP 2.6.3.1
ROMs:
Stock Metro PCS
CyanogenMod 10.2.1
Let me know if you need more information from me. Hopefully I can restart the phone so I can give you some version numbers.
Thanks everyone!
Click to expand...
Click to collapse
I agree with Elesbb. If the goal is jus tto get back to stock, just do an odin flash of the stock ROM. Be advised if you flash the latest Kit Kay update you will nto be able to go back to Jelly Bean. From your post it seems like you are partial to Jelly Bean. So if that's what you want, but sure you use the stock 4.3 ROM. You can find it around here on XDA somewhere with a quick search to make sure you have the right one.
As Elesbb said, you won't loose the 'sim unlock'. But you will lose root. However you can root the stock ROM just fine.
You might also consider one of the myriad of TouchWiz based custom ROMs. They are look just like TouchWiz that your wife wants, but have a lot of optimizations and options in them. Those should flash just like any ROM. If you still get the reboot issue then do the Odin back to stock, reroot, then flash the custom TW roms.
---------- Post added at 12:46 PM ---------- Previous post was at 12:45 PM ----------
Thread cleaned.
Rather than bashing a ROM or user let's keep on topic and help the OP resolved the problems he's having. Arguing over the virtues of a ROM doesn't help anyone.
Thank you,
Rwilco12
Before posting this thread I sent the aforementioned guide's poster (arocker). He sent me a reply saying not to use gapps as the stock ROM for Metro PCS already comes with Google apps. I'll try his suggestion first and see if the phone still reboots a lot.
If the problem persists, I will try the solutions mentioned here. Thanks a lot!
elesbb said:
I didn't read everything but just wanted to say
VERY GOOD THREAD!
this is how threads should be done. Very descriptive, organized, told us everything you did and asked for help! Good job man! Only negative is it prolly should have gone in Q&A section but irregardless very good thread!
About your issue, I recommend flashing stock Odin tar file to everything back to stock and reroot and start over. Flashing stock will not lock it again it will remain unlocked. But should get you back up and fresh. Just be aware it will erase all your data and all of the internal SD card.
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
After trying arocker's suggestion to not flash gapps, the phone still reboots. So now, I am going to try your solution guys.
But before I do, I want to make sure that I am on the correct paths/links.
Here's what I found for the following:
ODIN
forum.xda-developers.com/galaxy-s3/themes-apps/27-08-2013-odin-3-09-odin-1-85-versions-t2189539
I've had a couple of chances to use ODIN but only using specific functions like flashing a recovery file while the phone is in download mode. I don't however have any experience using ODIN to put the phone back to stock where the phone gets unrooted. Having the phone unrooted is fine by me as I only needed to have the phone unlocked.
Any step-by-step guides for using ODIN for this specific purpose guys? I don't want to mess this up again.
Thanks and sorry for the trouble.
dokgu said:
After trying arocker's suggestion to not flash gapps, the phone still reboots. So now, I am going to try your solution guys.
But before I do, I want to make sure that I am on the correct paths/links.
Here's what I found for the following:
ODIN
forum.xda-developers.com/galaxy-s3/themes-apps/27-08-2013-odin-3-09-odin-1-85-versions-t2189539
I've had a couple of chances to use ODIN but only using specific functions like flashing a recovery file while the phone is in download mode. I don't however have any experience using ODIN to put the phone back to stock where the phone gets unrooted. Having the phone unrooted is fine by me as I only needed to have the phone unlocked.
Any step-by-step guides for using ODIN for this specific purpose guys? I don't want to mess this up again.
Thanks and sorry for the trouble.
Click to expand...
Click to collapse
No trouble at all, check out the stickies in the beginning of threads.
Look for guides similar to this.
http://forum.xda-developers.com/showthread.php?t=2335109
Pp. Good luck.
sent from my bluetooth controlled toaster.
PanchoPlanet said:
No trouble at all, check out the stickies in the beginning of threads.
Look for guides similar to this.
http://forum.xda-developers.com/showthread.php?t=2335109
Pp. Good luck.
sent from my bluetooth controlled toaster.
Click to expand...
Click to collapse
Hello PanchoPlanet,
Thanks for the link. I went ahead and tried to unroot without Windows (Mobile Odin) as per the instructions on the link. I downloaded everything and went ahead to install the Mobile Odin APK. When I ran it to install the Flash Kernel, the app told me that the device is not supported.
To my understanding the guide is for M919 devices but should work for my wife's device as well (M919N - Metro PCS). I would like to try the guide for using Windows but I'm not really expecting for it to work or I might mess it up more. I'll try to search some more and provide the links where this forum will lead me to. But if you have any ideas, please let me know asap. Thanks!
PanchoPlanet said:
No trouble at all, check out the stickies in the beginning of threads.
Look for guides similar to this.
http://forum.xda-developers.com/showthread.php?t=2335109
Pp. Good luck.
sent from my bluetooth controlled toaster.
Click to expand...
Click to collapse
Ok, here's what I found:
forum.xda-developers.com/showthread.php?t=2446497
It seems like the perfect thread for what I am trying to achieve. Will let you guys know if it is successful. But it will have to wait for tomorrow. Gonna catch some sleep.
Okay, I'm running out of options. I was able to flash the stock ROM using Odin 3.07. The recovery looks like it came back to the stock recovery as I no longer have TWRP installed. When I install Root Checker, I see that I am no longer rooted. That's good.
But my original problem is still here. The phone reboots a lot. The phone is so unstable that it is barely usable.
I am now going to try one more thing.
I have a Galaxy S4 (I337M) from Rogers Canada (my wife has Metro PCS M919N). Mine got rooted and has CyanogenMod 10.2.1 as a custom ROM. My phone is working perfectly while hers reboots a lot. I was thinking it was because of a faulty battery. So I am doing an experiment by swapping the batteries. So far no reboots have occurred, but I will continue to monitor this.
Any ideas why the battery is kinda messed up?
This thread talks about battery stuff and reboots:
http://au.ibtimes.com/articles/530338/20131216/samsung-galaxy-s4-problems.htm
Batteries can go bad a lot of ways. Extreme temperature, factory defect, phone drops, moisture, etc.
Sent from my SGH-M919 using XDA Premium 4 mobile app
Android_Monsters said:
This thread talks about battery stuff and reboots:
http://au.ibtimes.com/articles/530338/20131216/samsung-galaxy-s4-problems.htm
Batteries can go bad a lot of ways. Extreme temperature, factory defect, phone drops, moisture, etc.
Sent from my SGH-M919 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
And 100% of the time, they eventually just get old.
dokgu said:
Okay, I'm running out of options. I was able to flash the stock ROM using Odin 3.07. The recovery looks like it came back to the stock recovery as I no longer have TWRP installed. When I install Root Checker, I see that I am no longer rooted. That's good.
But my original problem is still here. The phone reboots a lot. The phone is so unstable that it is barely usable.
I am now going to try one more thing.
I have a Galaxy S4 (I337M) from Rogers Canada (my wife has Metro PCS M919N). Mine got rooted and has CyanogenMod 10.2.1 as a custom ROM. My phone is working perfectly while hers reboots a lot. I was thinking it was because of a faulty battery. So I am doing an experiment by swapping the batteries. So far no reboots have occurred, but I will continue to monitor this.
Any ideas why the battery is kinda messed up?
Click to expand...
Click to collapse
That's a wierd situation, by swapping batteries you basically performed a battery pull, which acts as a reset, that in it self may have cleared your issue.
Now if battery is bad that could be an unusual problem. Maybe just replacing the battery will be the end of your mystery.
Pp.
sent from my P5113 using TouchPal mind control keyboard. (Beta)
The battery should be brand new as the phone was just recently purchased this April.
Anyways, so far no reboots have happened and any instability has not been shown at all. Everything looks ok, yet.
Anyone know if it is safe to swap batteries? Our phones have different S4 models. I'm not sure what the implications would be. Also what is this battery pull which acts as a reset? We've been pulling the battery a lot of times but the reboot still happens but not when we swapped batteries.
The batteries are all the same. Don't worry about that.
Even if its a new battery if could have just been bad. A manufacturing defect perhaps.
Sent from your phone. You should be more careful where you leave that thing.
dokgu said:
The battery should be brand new as the phone was just recently purchased this April.
Anyways, so far no reboots have happened and any instability has not been shown at all. Everything looks ok, yet.
Anyone know if it is safe to swap batteries? Our phones have different S4 models. I'm not sure what the implications would be. Also what is this battery pull which acts as a reset? We've been pulling the battery a lot of times but the reboot still happens but not when we swapped batteries.
Click to expand...
Click to collapse
This battery thing is wacky, anyway swapping batteries should not be a problem, it's just an energy storage container. Pulling the battery isn't like powering down the phone or resetting/rebooting ,sometimes devs request a battery pull to get the proper wipe effect that reboots can't provide.
You inadvertently solved your problem by accident. That's a good thing.
Pp.
sent from my P5113 using TouchPal mind control keyboard. (Beta)
PanchoPlanet said:
You inadvertently solved your problem by accident. That's a good thing.
Click to expand...
Click to collapse
I have quite literally solved the vast majority of my problems this way.
Its a preferred method.
Sent from your phone. You should be more careful where you leave that thing.
Sometimes it's that "total disconnect "of power that kind of gets all the ducks lined up in a row and everything flows in the dynaflow.
Good.
Pp.
sent from my P5113 using TouchPal mind control keyboard. (Beta)
its very important topics and it might seen for every galaxy s4 users.just wonderful topics.
This exact same thing happened on my mother's 6-month old S3. If you're still wondering, you could try putting the old battery and running a CPU stress test app. It should increase the current draw and trigger a shutdown.
EDIT: whoops, sorry to kind of zombie. Didn't check the date.
Sent from my Galaxy S4