So I soft bricked my s2 and now my PC doesn't recognize my USB and drivers are installed, Odin doesn't recognize it either.
Sent from my SGH-M919 using xda premium
Try reinstalling the USB drivers and reboot your computer and try the USB ports on the back not front, also can you remember if you had adb debug enabled?
sent from my t mobile S4
krazierokz said:
Try reinstalling the USB drivers and reboot your computer and try the USB ports on the back not front, also can you remember if you had adb debug enabled?
sent from my t mobile S4
Click to expand...
Click to collapse
Yes it was enabled and tried everything you said with no luck.
Sent from my SGH-M919 using xda premium
Take out your sim, micro and battery for a min then plug the phone up to pc while holding both volume buttons put the battery back in while still holding volume let me know if it goes :what:
sent from my t mobile S4
It finally got recognized, thank you.
Sent from my SGH-M919 using xda premium
Related
Phone won't let me use device for usb storage it says mtp mode and offers no options when I click on it from notification menu. It also won't let me tether through usb anymore. I'm on midnight 2.0 rom. The everything worked fine for about a week and now this mtp mode sh1t. Please somebody help me!
Sent from my SPH-D710 using xda premium
I've had this happen as well.
Enable usb debugging, then it'll work. idk why it has to be fine like that though.
Walzbeer
Didn't work, and it got rid of mtp mode but nothing happens when I plug usb in now (besides charge)
Sent from my SPH-D710 using xda premium
you have to go to
settings/wireless and network/usb utilities/connect storage to pc
It will ask you to connect cable, then you can choose usb mass storage.
Just flashed new rom cause nothing worked thanx for the input thou.
Sent from my SPH-D710 using XDA App
nazs said:
Didn't work, and it got rid of mtp mode but nothing happens when I plug usb in now (besides charge)
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Is the computer recognizing the.phone? Once USB debugging is checked you should be able to pull down the notification bar and make your selection.
Sent From My Evo Killer!!!
musclehead84 said:
Is the computer recognizing the.phone? Once USB debugging is checked you should be able to pull down the notification bar and make your selection.
Sent From My Evo Killer!!!
Click to expand...
Click to collapse
Tried but that didn't work either, thax for your help thou hope this was isolated incident.
Sent from my SPH-D710 using xda premium
I'm on windows 7, 32bit, installed AT&T Samsung drivers.. Tried multiple USB cables that recognize my other devices.. But I can't for the life of me get this I747 to register as a portable device. Please help! Any suggestions would be appreciated.
Edit: device is stock and unrooted..
Do you have the original USB cables?
Sent from my SGH-I747 using xda app-developers app
liltitiz said:
Do you have the original USB cables?
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Yes I do.. Now my pc isn't recognizing my sch-1535 either..
Take thé USB plug behind tour computer
Sent from my SGH-I747 using xda app-developers app
liltitiz said:
Take thé USB plug behind tour computer
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Still no luck. The phone charges but doesn't register the adb interface/hard drive/etc
http://forum.xda-developers.com/showthread.php?p=28175077
Did you try installing the drivers with this toolkit?
Sent from my SGH-I747 using xda app-developers app
liltitiz said:
http://forum.xda-developers.com/showthread.php?p=28175077
Did you try installing the drivers with this toolkit?
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Still no dice. I followed the toolkit to the T, reinstalled the drivers a couple of times too for good measure, and my phone still never registered. This is driving me nuts! My friends phone is popping right up when she connects to the PC but not mine.
Try the assistance chat on Samsung site since you are stock they can help you better with that. It is starting to look like a hardware issue.
Sent from my SGH-I747 using xda app-developers app
mindflayyer said:
I'm on windows 7, 32bit, installed AT&T Samsung drivers.. Tried multiple USB cables that recognize my other devices.. But I can't for the life of me get this I747 to register as a portable device. Please help! Any suggestions would be appreciated.
Edit: device is stock and unrooted..
Click to expand...
Click to collapse
Try this. (use the usb cable that came with S3)
Worked for me on my Win7 32bit.
Had similar issues on XP. Different fix for XP.
same issue, although my phone connects to 32-bit version of win 7 at work and not at home 64 bit win 7.... just charges the phone, prompt NEVER comes up
I never get mine to show up on the first try. I usually have to plug it out and back in a few times for it to work. But when i got it working, it only works on the same usb port.
Another thing i did at first to get it to recognize the phone was to use the desk to app.
Sent from my SGH-I747 using xda app-developers app
I kept toying around with this problem. My laptop has winxp. It would beep when I put the cable in, but I was always disappointed by no connection. Then my phone would tell me to try and download Kies. Did not want to do that. But I did. Connection could still not be made.
I stumbled onto a fix. Dunno if it will work for anyone else. I was juggling about 2 dozen things at the time and might have missed a critical step.
I plugged in a USB OTG cable with an 8gb flash drive. The phone recognized it! Even displayed a cute little message in the status bar that USB was connected (instead of MTP). This all lasted a whole 2.7 seconds after hours of searching for solutions.
I tried connecting it to my computer for another try, and I am proud to report that is is working flawlessly for now!!
I have had the same issue off and on. Found somewhere this past week a suggestion to pull the battery in order to cause a hard reboot. It worked. Plan on trying it whenever it happens again.
I recently got a used T-Mobile S 2 and just tried to root it. The computer will not see the phone when I hook it up to the USB. I've tried the Odin method and it won't even register it's plugged in. I've installed and reinstalled kies 3 times and I've even tried just installing the drivers by themselves. Is there a way to root the phone without having to use the USB? I'm guessing the USB connector on the phone is bad even though it's charges just fine.
Sent from my A500 using xda app-developers app
lordator said:
I recently got a used T-Mobile S 2 and just tried to root it. The computer will not see the phone when I hook it up to the USB. I've tried the Odin method and it won't even register it's plugged in. I've installed and reinstalled kies 3 times and I've even tried just installing the drivers by themselves. Is there a way to root the phone without having to use the USB? I'm guessing the USB connector on the phone is bad even though it's charges just fine.
Sent from my A500 using xda app-developers app
Click to expand...
Click to collapse
If it charges ur fine, is the device in DL mode? What is the procedure u are using, with this phone the only way to root it is Odin, or maybe adb but I'm not sure, and if u have kies installed on ur pc Odin won't see the phone I repeat remove kies, once ur rooted u will never use it again anyway kies interferes with Odin, make sure u have the OEM USB cord too...
Sent from my SGH-T989 using xda premium
I'm using the volume up+down with the power button to access the download screen with Odin and it never reads that the phone is plugged in. I've uninstalled Kies and still doesn't work. Now I've noticed that I can only go into the e3 recovery mode.
Sent from my A500 using xda app-developers app
lordator said:
I'm using the volume up+down with the power button to access the download screen with Odin and it never reads that the phone is plugged in. I've uninstalled Kies and still doesn't work. Now I've noticed that I can only go into the e3 recovery mode.
Sent from my A500 using xda app-developers app
Click to expand...
Click to collapse
So the phone accesses doenlode mode? Try holding just the vol+vol- buttons and plugging it in to the USB while connected to PC, that should put u in DL mode, if not it might be ur port, have u tried all other ports and different usb wires? Sorry if my questions are trivial but I need all the info if I'm going to help
Sent from my SGH-T989 using xda premium
Yeah I've tried 3 different cables and 2 different computers. I'm leaning towards the USB Jack. I took the phone apart and found corrosion on the board towards the bottom so it looks like the phone has some water damage.
Sent from my A500 using xda app-developers app
lordator said:
Yeah I've tried 3 different cables and 2 different computers. I'm leaning towards the USB Jack. I took the phone apart and found corrosion on the board towards the bottom so it looks like the phone has some water damage.
Sent from my A500 using xda app-developers app
Click to expand...
Click to collapse
Thats most likely ur culprit then, it may be just corroded enough to not hit the right pins to push data through odin, u could try to replace the USB com, u can get one for around 30bucks online and its an easy fix if u have a lil knowledge, the bad news is without it rooting is next to impossible ...
Sent from my SGH-T989 using xda premium
Might just have to do that. Thanks for the help!
Sent from my A500 using xda app-developers app
lordator said:
Might just have to do that. Thanks for the help!
Sent from my A500 using xda app-developers app
Click to expand...
Click to collapse
I mean if u don't want to try the fix u could try rooting it through wireless adb but that's a long shot at best, just started using wireless adb an not even sure if its possible to root it like that but u could look into it...
Sent from my SGH-T989 using xda premium
I have 2 pc's win7 and XP . Neither one even notice the phone is connected.
I have tried different usb cables,Usb debugging on/off, Lg driver from lg.com .
Phone just has a "low power charging" popup when plugged in to pc.
What can i do ?
Sent from my LG-LS970 using xda app-developers app
myturbo1 said:
I have 2 pc's win7 and XP . Neither one even notice the phone is connected.
I have tried different usb cables,Usb debugging on/off, Lg driver from lg.com .
Phone just has a "low power charging" popup when plugged in to pc.
What can i do ?
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
is your phone in MTP mode?
Sure is
Sent from my LG-LS970 using xda app-developers app
myturbo1 said:
Sure is
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
Just follow the few steps:
1. Download & install (or reinstall) the latest LG Mobile Driver.
1.1 Your phone must not be plug in to your computer while installing driver.
2. Reboot your computer once it's done.
3. Make sure your device is not in USB Debugging mode. (Setting---Developper Option)
4. Choose MTP from PC connection type...
5. Plug your phone to your computer and let it load the driver.
Enjoy. :good:
Didn't work . Even took apart phone to examine usb port . Seems fine to me.
However Neither pc will connect to this or my Lg nexus 4.
Sent from my LG-LS970 using xda app-developers app
Same here..
I'm in the same boat as you, even followed you're route of progressive troubleshooting all the way taking out the usb circuit board and looking for damage. I'm at a loss
Do you try port usb 2.0?
Try all the different usb ports.
Had the same problem when I would flash the KDZ file
I recently updated my Note 2 SPH-L900 to Android 4.3. At first everything went well until when I went to root it it seems though my phone recognizes its been plugged in as a media device to my computer it says that there is no program that can access its files. I've activated USB debugging as well as put it to MTP+ADB under the Qualcomm USB settings and then selected to use MTP. Did I click a wrong setting? My phone will charge when plugged in to my computer. Odin also does not recognize my phone. Any help to fix this problem is greatly appreciated.
USB debugging is MTP+ADB. When you put it back on MTP you took it off USB debugging.
Sent from my SPH-L900 using xda app-developers app
ecs87 said:
USB debugging is MTP+ADB. When you put it back on MTP you took it off USB debugging.
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
I didn't take it off of MTP+ADB. One I pressed save and reset I plugged my phone in and touched the USB button in the status bar then I selected mtp for media device instead of ptp for camera. Yet despite having the right settings my note 2 states that it is unable to find software on my computer that can recognize my phone. I'm using Windows 7 with the Samsung USB phone drivers installed already. This problem only started when I updated to the 4.3 update. Hopefully this information helps a bit more then my previous post.
ecs87 said:
USB debugging is MTP+ADB. When you put it back on MTP you took it off USB debugging.
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
Is adb on your computer up to date?
Sent from my SPH-L900 using XDA Premium 4 mobile app
Uninstall the drivers and reinstall them from here: http://www.samsung.com/us/support/owners/product/SPH-L900TSASPR