Ive been trying to set the overclock frequencies on my phone, but they only last for a while then the max freq resets to 1026MHz. Ive tried using AnTuTu CPU Master, No Frills, and Trickster Mod...and they all do the same thing, even when I "Set on boot".
Im using the Tiberius 2.3 Kernel.
Any suggestions as to what I might be doing wrong??
Thanks.
what kernel governors are you using when settings these frequencies ? performance , ondemand, etc.??? have you tried the 2.4 to see if maybe it will fix that issue . @cl3kerner is always on top of things and his Kernel has been updated so try that see if it works if not try reporting in his thread where he would be more than happy to help you
Thanks for the reply. I haven't tried 2.4 just yet, only saw 2.3 when I downloaded it yesterday actually, will look again.
The last configuration I was trying was samsung/row , but all configurations seem to do the same. Perhaps there are some residual files from a previous kernel which is causing this? If so, is there anything I could do to properly clean it out?
Thanks
OK tried 2.4 and getting the same results.
Sent from my SGH-T989 using xda app-developers app
So Cl3Kener helped me solve this. Turned out it was the power saving feature that was limiting the processor speed, as well as battery saver pro. Worth a note I guess if anyone else experiences this issue.
Sent from my SGH-T989 using xda app-developers app
Related
Now I am not blaming the app I am just wondering... everynow and then, when I wake my phone up, it doesn't want to wake up or when I turn it on and try to unlock it freezes... was wondering if anyone else was getting the same thing.
Rooted using the one-click method.
Screen off setting is min 400 max 400.
Sent from my SPH-D700 using XDA App
SetCPU issues
I have been having the same issues myself. Mine was set low to 100min/max: screen off just as a test today and it did that to me a on a few seperate occasions. Not sure why, just ended up battery pulling after 10-15 seconds of no response from the phone.
The cpu is set too low on screen off, go for 245 or so
setcpu does not play nice with r phones. i had problems witth it on every kernal i played with. right now im using the mix up kernal. i used setcpu to 1.2ghz max and 100mhz min. conservative governore. i have yet to find a set up to use while the screen is locked with no issues. what i do know is galaxy s phones only like the conservative setting. maybe a 400mhz max 100mhz min with conservastive governore would work?
Make sure setcpu is set to conservative. I set my lowest to 200mhz and max at 1200. No issues here other than sometimes the notification pull down bar is laggy but it does that stock anyway.
Sent from my SPH-D700 using Tapatalk
I'll try out those settings tomorrow. Thanks guys =)
Any1 know how to get to 1.4 ghz? my max is 1.2 on setCPU and i have voodoo kernel flashed
Try this to hit 1.4.
http://forum.androidcentral.com/epic-4g-roms-hacks/36554-emergency-rom-alert-baked-snack-1-0-a.html
zetterwing said:
Try this to hit 1.4.
http://forum.androidcentral.com/epic-4g-roms-hacks/36554-emergency-rom-alert-baked-snack-1-0-a.html
Click to expand...
Click to collapse
thanx dude i really appreciate it but still only 1.2 for sum reason
II5StarII Swag said:
thanx dude i really appreciate it but still only 1.2 for sum reason
Click to expand...
Click to collapse
There's a kernal that allows you to hit 1.4ghz its the overclocked one from baked snacks
Sent from my SPH-D700 using XDA App
mysteryemotionz said:
There's a kernal that allows you to hit 1.4ghz its the overclocked one from baked snacks
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
thats the rom i switched from dude both only allowed up to 1.2ghz thanxs for replying
II5StarII Swag said:
thats the rom i switched from dude both only allowed up to 1.2ghz thanxs for replying
Click to expand...
Click to collapse
The rom don't control the cpu speeds. The kernal does. You cab run any rom kernal combo you would like. In order to hit the 1.4ghz you want you need to run a kernal that is capable of doing so
Sent from my SPH-D700 using XDA App
Is SetCPU really necessary anymore? If you run a kernel that's not locked into performance mode it will scale on it's own even without SetCPU. I haven't installed it on my Epic yet and when monitoring the phone with SystemPanel I see my CPU go down to 200mhz when idle and scale up when processes are running.
Where is the kernel for 1.4? I have baked snack rom max is 1.2 i know kernel is the part that "controlls" speed but I'm stuck. Any help
Sent from my SPH-D700 using XDA App
specialk0324 said:
Where is the kernel for 1.4? I have baked snack rom max is 1.2 i know kernel is the part that "controlls" speed but I'm stuck. Any help
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Last I knew it was on the baked snacks website
Sent from my SPH-D700 using XDA App
I have found this link but it doesn't say anything about being "beta 8"...
http://forum.xda-developers.com/showthread.php?t=848453
Can anyone assist?
Thanks!
Page 298, Chad posted a download link.
Sent from my ADR6300 using XDA App
Thanks! I would have never found that. Unfortunately, the link is broken or (more likely) the server is down. I'll give it a try later.
Thanks!
I have it, if you hold on a sec I'll try to get it uploaded or a link. Not used to uploading from my phone.
Sent from my ADR6300 using XDA App
k_nivesout said:
I have it, if you hold on a sec I'll try to get it uploaded or a link. Not used to uploading from my phone.
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
I FOUND IT. It's actually linked at the bottom of the first page of this thread. I thought it would be the old one but it's updated.
Thanks!!!!
http://db.tt/b1YMeKf
Ah, and I signed up for dropbox, uploaded it and everything. Haha oh well, there's another link.
Sent from my ADR6300 using XDA App
Very cool of you.
Now trying to see if it actually worked and then see if it actually produces any benefits.
No problem! I've been running beta 8 for most of today and its been nice. My settings are 128/1113, smartass governor. Chad's new ingenious governor is coming along nicely, I just find smartass to be a bit more stable for CPU intensive apps.
Sent from my ADR6300 using XDA App
k_nivesout said:
No problem! I've been running beta 8 for most of today and its been nice. My settings are 128/1113, smartass governor. Chad's new ingenious governor is coming along nicely, I just find smartass to be a bit more stable for CPU intensive apps.
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
You just stepped about 2 jumps ahead of where I am. I have SetCPU and I assume that's where you find the smartass governor. So it's wise to switch to that?
I had a fail here. None of my SD card app's icons loaded. I had the same problem when I upgraded to CM#90. I think I know how to fix it...
Sorry about the lingo haha, yes, I believe you can set the governor in setCPU. I'm using cyanogenmod which has built in performance settings and I've heard using that WITH setCPU can cause conflicts. I was just saying that I set my minimum to 128mhz and max to 1113mhz and use the smartass governor. As I understand it, the governor controls how the CPU scales for certain tasks, etc. I think the smartass governor is made for performance and efficiency (I.E turning CPU usage down when screen is off then increasing CPU with usage). Chad's new "ingenious" governor also does this but is new and improved, however does have some issues and thus still a beta kernel. Hopefully that made some sense!
Sent from my ADR6300 using XDA App
I haven't played around with the CM performance settings. I might just uninstall setCPU for now and use those. I don't need any more conflicts!
All you need is in that performance menu, the governor you choose takes care of what you would use profiles in setCPU for.
Sent from my ADR6300 using XDA App
Well... b8 does not install correctly for me. I don't get my icons for apps on the SD card. I tried clearing my cache, battery, dlavik first then installed. No icons. Rebooted again too.
I had the same problem on the update to CM#90 but clearing all those caches resolved it.
I would go report this on the main thread but it won't let me post. I'll have to wait and let Cyanogenmod update its kernel along the way.
So you're missing icons for apps that are installed on SD? Did you install them directly to SD or move them later? Where is it that the icons are missing from, the app drawer, home screen, etc? I have some apps on my sd and I've never heard of that happening, I'd be interested to see what's causing it.
Sent from my ADR6300 using XDA App
I installed them normally then moved them to the SD card. Its the icons on the home screens. They appear normally in the app drawer. I have no clue why they won't load. I know that clearing all those caches and manually installing the ROM eliminates the problem.
I am just assuming it's the apps on the SD card. I guess I should pay a lot closer attention next time. It is a great deal of the icons. Maybe it's just the apps I moved that apps2sd did not suggest but I moved them anyway.
Still waiting for build #91 thinking maybe it addressed the problem.
I have read before that any apps with widgets need to be on internal storage.
Sent from my ADR6300 using XDA App
me too. But these aren't widgets. They all come back when I perform that ritual of deleting all the caches. Just not with b8.
Weird, I thought you said icons but that was the only thing I could think of that might cause that issue. If you flash another kernel, the icons come back though?
Sent from my ADR6300 using XDA App
anw, is this kernel works on [sense 2.1] gingersense remix b4 by wdfowty?
Recently took the time to flash to the sweetest ICS ROM out there, Darkside of course! After installing and setting up my profiles again I cannot seem to get SetCPU to run in the background. Normally as I'm sure you all know, when you boot your phone it starts with it and puts the icon in the status bar, however that is not the case. Double checking the app everything is set up properly, but seems to refuse to run at boot.
Anyone have any insight on this?
Try the profiles in set CPU and enable them. That's what I do and it works. Also you can download cpu spy and you will also see what it's running mainly on.
Sent from my SGH-T989 using xda
suaverc118 said:
Try the profiles in set CPU and enable them. That's what I do and it works. Also you can download cpu spy and you will also see what it's running mainly on.
Sent from my SGH-T989 using xda
Click to expand...
Click to collapse
Yeah that's another question I had. I was curious if there was another app that monitored the CPU outside of SetCPU to see if the profiles are actually functioning regardless of the SetCPU icon being in the status bar.
I've installed CPU Spy and SetCPU is running my profile correctly so far. Thanks for your contribution & I will continue to monitor this to see if it runs all my profiles properly.
No problem.
Sent from my SGH-T989 using xda
ive been running ICS since i got my phone, the battery life was horrible until i fixed the power profile, but even after that my phone's battery was not that good. i decided to flash CM10, then i switched to AOKP, both of them are awesome, but i noticed that the battery wasnt that good either, i got the ktonnsez kernel. i tried other governors, they all stay at maximum (1512MHz) after about 5 minutes of a reboot. i tried basically everything, reflash every thing, wiped everything possible. I need help plz, i wanna enjoy my S3 without worrying about the battery dying.
its all normal when i start my phone, but after 5 minutes it just stays at maximum CPU...idk why plz help im on galaxy s3 ATT i747M...i searched everywhere but still didnt find the answer
If you flashed kt747 you need to use the ktweaker app that comes with the kernel. When you find this app you need to check the two boxes into general settings
Sent from my SGH-I747 using xda app-developers app
http://db.tt/vANjN5VP
Sent from my SGH-I747 using xda app-developers app
Have you solved this yet?
Try a different governor. Personally I use on demand and noop for the scheduler.
Make sure you don't have any other overclocking programs which may be conflicting. I used to use SetCPU but with the toonz kernel I get Ktweaker. So I got rid of SetCPU.
Funny yours is locking at maximum. Mine used to lock at 96Mhz and run like crap. The above method worked for me. Don't forget to make sure your running the most updated kernel, wipe cache/dalvik/fix permissions.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
liltitiz said:
If you flashed kt747 you need to use the ktweaker app that comes with the kernel. When you find this app you need to check the two boxes into general settings
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Tyvm, i did what u told me and its working for now, i was using ktweaker the whole time, but i like to check my current speed in ROM control, idk why maybe cuz the numbers are bigger? ;P im still not sure if its going to work for a long time, i did a reflash yesterday, i charged my phone at 100 percent last night, and it was sitting on low frequency, when i woke up, i was suprised to see a 6% drop of the battery, leaving me 94% left. but the speed was at 1512. and cell standby was using most of the battery.
g2tegg said:
Have you solved this yet?
Try a different governor. Personally I use on demand and noop for the scheduler.
Make sure you don't have any other overclocking programs which may be conflicting. I used to use SetCPU but with the toonz kernel I get Ktweaker. So I got rid of SetCPU.
Funny yours is locking at maximum. Mine used to lock at 96Mhz and run like crap. The above method worked for me. Don't forget to make sure your running the most updated kernel, wipe cache/dalvik/fix permissions.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
TY, ive tried switching governors before and it didnt work. But when i tried this morning, it worked... really strange.
Idk if it will last long, my phone likes to jump around from normal to maximum without me even touching the phone
Use ktweaker instead of the rom settings. Go to the performance section in settings and disable set on boot. Then, go to ktweaker and set as "apply settings immediately after boot". Once you're done, set to whatever you want it to be.
Sent from my SGH-I747 using Tapatalk 2
This is a kernel I have made based off of the Gproject kernel for CM.
Features:
10/25
Added wheatley and smartmax governors. As many TCP congestion options as one could ask for. A couple other small things.
10/24-4
Fix CM compatibility break. Bye bye LSD effect
10/24-3
The kernel package is now using an implementation of koush's anykernel.
I suggest for those who are having any issue to flash back to their ROM image (don't delete data). Then reflash using this. It uses the ramdisk already present on the device so it might break less things
10/24-2
Reset the GPU min freq to stock so that we don't lose battery
10/24
GPU OC extended for to 585Mhz. Woot woot.
10/23
1.89Ghz if you dare MWAHAHAHA
10/22
162Mhz was a little bit hopeful so I got rid of the frequency because without that we seem to lose the HW resets. Overclock still seems to work fine Antutu 20200.
10/21
Overhauled the CPU frequency range. We now have stable OC to 1.81 and UC to 162Mhz. Depending on the application you can toy with intellithermal settings to get the best performance from that situation.
Edit: not so stable at 1.81 I lied go for 1.72 for now (always forced to eat my words)
10/17
Quite a few changes. We have an updated wifi driver as well as an updated graphics driver. I added gamma control. Simple GPU governor is now set to default for battery savings and by that one can imply obviously it is working now. FIOPS scheduler added. A few minor things.
9/30-2
removed knock knock by farbuggy
9/30
Okay so I am really really really hoping this one rids SOD's good. Also I added a knock on interface. Until it gets implemented into the systemui of a rom though it will only work while screen is off. (It's a work in progress and the knock on ability is disablable though the file /sys/kernel/knock_knock/knock_knock_enabled[1 = on, 0 = off]) This I believe is the first custom kernel to have any kind of knock on type interface. So far it's just been made up for by showp-1985's s2w.
9/29
Tweaked undervolt so hopefully we can say goodbye to SOD's. I have had success with lower settings but this should cover a broader base. If anyone get's an SOD with these settings, let me know and I will update the kernel ASAP.
9/28
Added undervolt by default and faux123 mako's implementation of sweep2wake. It doesn't show in tricksters mod but you can turn it on and off in sysfs through the file /sys/kernel/s2w_parameters/s2w_switch. (1 = on, 0 = off)
9/27
Ummm let's see... Today we got: GPU Overclock to 487Mhz, intelli-thermal from faux123, and a couple little things here and there .
Edit: I added a little more there is now an adjustable voltage table and the phone defaults with intelliplug and intellithermal
9/26
Intellidemand doesn't control hotplugging anymore. That functionality is moved to intelliplug. I think we have hotplugging and performance now let me know all! (mpdecision still enabled by default, go to trickster and see the new additions )
9/25
Faux sound control.
Intellidemand. (mpdecision should be turned off to utilize this feature properly)
Extended CPU frequency range (192Mhz - 1728Mhz)
Download Links:
Now on codefi.re female dogs!
http://fs1.codefi.re/neighborhoodhacker/
Old links:
10-22-2013
10-21-2013
10-17-2013
9-30-2013-2
9-30-2013
9-29-2013
9-28-2013
9-27-2013
9-26-2013
9-25-2013
And, of course, my GPL/XDA compliant github.
XDA:DevDB Information
[KERNEL]Neighborhoodhacker's Kernel, a Kernel for the Sprint LG Optimus G
Contributors
neighborhoodhacker
Kernel Special Features:
Version Information
Status: Stable
Created 2013-09-26
Last Updated 2013-11-02
Downloading ... I've been hearing your name around the forums so this has to be good.. Thanks for your hard work
Dude excellent work on this. Have it flashed and intellidemand is an awesome addition. Thanks for your hard work, I'll let you know if I run into anything.
Sent from my LG-LS970 using xda app-developers app
Thanks for the kind words gentlemen let me know of any issues definitely
Sent from my LG-LS970 using XDA Premium 4 mobile app
Edit: also please excuse the edify text. I didn't get around to editing that yet
I'm having major speed issues. My overclock used to work so much better. Something keeps forcing the CPU down. Idk what it is....
Sent from my LG-LS970 using XDA Premium 4 mobile app
Any projections on what this should do for battery? Is it likely to improve battery life or improve performance?
Thanks for the hard work.
Sent from my LG-LS970 using Tapatalk 4
Is undervolting possible with this kernel?
Sent from my LG-LS970 using Tapatalk 4
neighborhoodhacker said:
I'm having major speed issues. My overclock used to work so much better. Something keeps forcing the CPU down. Idk what it is....
Sent from my LG-LS970 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Maybe it has something to do with MPDecision or temp throttling? I know in the past I've seen other kernels have some issue at first with fully disabling it, causing it to continue to interfere with some settings.
Awesome work..... With faux
Thank you for cooking it
neighborhoodhacker said:
I'm having major speed issues. My overclock used to work so much better. Something keeps forcing the CPU down. Idk what it is....
Sent from my LG-LS970 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I'm not an expert on governors but with intellidemand (on our other roms) my optimal freq and sync freq were usually like 702mhz. Stock this kernel puts it at 192mhz. Correct me if I'm wrong, I'm not sure what these fields even mean. I'd like to know if anyone has any info.
I'm running the kernel anyway and so far so good. Thank you NeighborhoodHacker for this great kernel.
edit: I just tested Asphalt 8 and so far this kernel holds frame rates really well!! I don't if I was doing something wrong before, but for the longest time this game was unplayable for me.
mobius1484 said:
Maybe it has something to do with MPDecision or temp throttling? I know in the past I've seen other kernels have some issue at first with fully disabling it, causing it to continue to interfere with some settings.
Click to expand...
Click to collapse
So you think I might have to pull mpdecision out of the kernel? Uggg I was afraid of that.
Sent from my LG-LS970 using XDA Premium 4 mobile app
Mightve messed with trickster too much, but after flashing I ran antutu, bricked
Sent from my N850 using xda app-developers app
Maestertk said:
Mightve messed with trickster too much, but after flashing I ran antutu, bricked
Sent from my N850 using xda app-developers app
Click to expand...
Click to collapse
Ummmm try wiping cache/dalvik/ I highly doubt you are anything but slightly softbricked.
Having great success with with newest kernel. I even got an antutu of over 19000 with a hotplugging driver enabled! I'm pretty happy so I hope your guys experieces will mirror mine.
Well originally I ran antutu, then the phone went off, and notification light and capacitive lights flashed. I couldn't access recovery do I attempted a lgnsp. Now it won't even charge or turn on
Sent from my N850 using xda app-developers app
I assume this is a4.3 compatible kernel? Work with PAC man?
Sent from my LG-LS970 using xda app-developers app
Maestertk said:
Well originally I ran antutu, then the phone went off, and notification light and capacitive lights flashed. I couldn't access recovery do I attempted a lgnsp. Now it won't even charge or turn on
Sent from my N850 using xda app-developers app
Click to expand...
Click to collapse
All you had to do was wipe caches after your cash. Since you ran out your battery you made things so hard on yourself
Sent from my LG-LS970 using XDA Premium 4 mobile app
Also if you want good performance and hotplugging go to tricksters mod enable intelliplug and temperature throttle
Sent from my LG-LS970 using XDA Premium 4 mobile app
JeauxAdam said:
I assume this is a4.3 compatible kernel? Work with PAC man?
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
Should be
Sent from my LG-LS970 using XDA Premium 4 mobile app
Well now I feel silly lol thanks for the pointers though!
Sent from my N850 using xda app-developers app