I have a T-Mobile Galaxy Note 3 that was unlocked without using an unlock code and am using it on AT&T. I got it used and believe that it was unlocked using the Chainfire region away unlock method and it is running the Wicked ROM. I would like to flash Stock Deodexed N900TUVUBMI7 ROM or revert back to stock T-Mobile ROM but am concerned that this will remove the "unofficial" unlock. Has anyone done this, or can anyone confirm that my device will stay unlocked before I attempt to flash a new ROM or revert to stock firmware?
Thanks in advance for any advice.
Related
just bought a gs3 for my little cousin in venezuela. phone needs to be shipped off tonight. phone comes with tmobile 4.3. i know i cant revert back to 4.1.1 via odin. is it possible to get a rooted image of 4.3. which i found already. flash that via odin. then once rooted. install twrp. and flash a 4.1.1 rom with recovery along with with correct modem. and then do the unlock that way? is there anyway , to unlock, is there any rom with a software unlocked already in it.
Not possible, sorry bud.. If you bought it straight off T-Mobile you can request an unlock and see if they will unlock it for you or buy an unlock code
Sent from my SGH-M919 using Tapatalk
I unlock both my Koodo SGH-I747M by following the instructions (just by punching a bunch of codes) from one of those YT video and I've been using T-Mobile's prepaid service since.
http://forum.xda-developers.com/galaxy-s3/general/american-canadian-sgs3-read-flashing-t1757755
Since the specs are all the same for SGH-I747M (AT&T/Telus/Bells/Koodo/Rogers) + my phones are unlock, does that mean I can flash both my phones with Kit-Kat (once released) by any of these carriers (AT&T/Telus/Bells/Koodo/Rogers)?
Thanks.
p/s currently still on the original 4.1.1
I would not do it as att and koodo use different bootloaders and modems.
audit13 said:
I would not do it as att and koodo use different bootloaders and modems.
Click to expand...
Click to collapse
Glad I asked first, thanks for the reply and it makes sense :good:.
Personally, I would avoid knox as most custom KK ROMs will work fine with the 4.1.2 bootloader. I would only upgrade the bootloader if it was required for a ROM I really wanted to use.
Your unlock means nothing to the ability to install a ROM or not.
Now, you can install the Samsung ported Sprint Kitkat ROM for AT&T if you update your bootloader and modem to the MK5 version and never use ODIN or try to downgrade your bootloader ever again ! This ROM will not work without the MK5 bootloader and modem. If you proceed that way, your warranty will be void
Also, you can always flash Koodo builds
If you wish to keep your current bootloader, you can always install any of the non samsung ROMs, but some will require that you have the MF1 bootloader at the least (CM for example).
Hi everyone,
I am looking for a way to sim unlock my S3 so my girlfriend can use it on Telus (I just got an OPO )
Before I purchase a code, I have a few questions, if anyone knows the answer
1- Will an unlock code work with my setup? (I am seeing reports of it only working on Stock 4.1 and whatnot)
2- Where is a good place to purchase a code? (Rogers a crooks with a 50$ fee and I don't wanna get ripped off online either)
Thanks!
XC3N
You will need to be running a stock or close to stock ROM in order to use the unlock code. You do not need to be on stock 4.1.1 to use an unlock code. You need to be running stock 4.1.1 if you want to unlock using the free method. You may be able to unlock it using a code if you are running a stock dialler.
What bootloader or baseband is on your phone?
audit13 said:
You will need to be running a stock or close to stock ROM in order to use the unlock code. You do not need to be on stock 4.1.1 to use an unlock code. You need to be running stock 4.1.1 if you want to unlock using the free method. You may be able to unlock it using a code if you are running a stock dialler.
What bootloader or baseband is on your phone?
Click to expand...
Click to collapse
I managed to get a code from Rogers for half the price, which is "not that bad" I guess...
I have yet to try it as I don't have the SIM card with me atm.
Baseband: I747MVLUEMK5
it's my understanding that downgrading from this will brick your phone...
Thanks for all the info!
Yes, trying to downgrade from mk5 will brick your phone.
Find the stock Rogers ROM from sammobile.com and flash it via Odin. Flashing back to stock will wipe all user data and files so make sure you backup everything you need before flashing back to stock.
audit13 said:
Yes, trying to downgrade from mk5 will brick your phone.
Find the stock Rogers ROM from sammobile.com and flash it via Odin. Flashing back to stock will wipe all user data and files so make sure you backup everything you need before flashing back to stock.
Click to expand...
Click to collapse
Ok I tried the code and it didn't work.
I'll read up on the Odin procedure... I've done it before on another phone but I wanna make sure I don't end up with a brick! Thanks!
Sent from my A0001 using XDA Free mobile app
ah one more thing... since I'm using the unlock code (I don't believe the free method works on Rogers phone anyway) should I flash to stock MK5?
If I go to stock MK5, eill I be able to come back to CM afterwise?
Thanks!
The free method will only work if you are running an i747 or i747m on stock 4.1.1 including the bootloader.
If you flash back to stock mk5, you should be able to re-install cwm and CM11. There are many threads on disabling knox and install CWM.
audit13 said:
The free method will only work if you are running an i747 or i747m on stock 4.1.1 including the bootloader.
If you flash back to stock mk5, you should be able to re-install cwm and CM11. There are many threads on disabling knox and install CWM.
Click to expand...
Click to collapse
Hi! Reporting back, everything worked well flashing stock rom using this method:
http://forum.xda-developers.com/showthread.php?t=1739426
I had a slight problem after the Odin flash where I had to boot to recovery and factory reset to get out of a boot loop, but everything went fine after that.
I managed to unlocked the phone, changed the recovery using the aforementioned thread and got back up and running on CM11 M10 in no time!
Thanks a lot for your help sir =)
Francis // XC3N
Hey guys I am trying to update my galaxy s3 to kitkat. I am running galaxy s3 at&t variant 747 rooted 4.1.1. I747UCDLK3 update to kitkat. I realized I need to update to 4.1.2 first before doing the 4.3 update. I can't seems to find files I need for 4.1.2. Can someone point me in the right direction. Thank you for your help.
Are your running stock 4.1.1? If you are and your phone is not sim unlocked, unlock it using the free method. Once unlocked, use Odin to flash back to stock unrooted 4.1.1 and then run OTA until you get to KK. It's a longer process than trying to flash straight to 4.4 but is a safer method for people that are new to flashing ROMs.
I am on the stock rom 4.1.1. Does CWM recovery need to go back to stock as well? That is a good idea to unlock before I update.
If you flash back to stock 4.1.1 with Odin, it will wipe everything and put the phone back to completely unroot stock and stock recovery. Stock recovery and being unrooted is required for OTA updates.
Ok is this the link to unlock phone?
http://forum.xda-developers.com/showthread.php?t=2529200
Yes, that's it.
I can't seem to find 4.1.1 rom file links seem to be bad on unlock page.
There are stock rooted 4.1.1 images here: http://forum.xda-developers.com/showthread.php?t=1739426
You can use the free unlock method even if the ROM is rooted.
For some reason the at&t mirrors don't seem to be working either.
Mirror2 for the stock rooted 4.1.1 works for me.
I would like to root again after kit kat Is it easy to root with knox? Does unlock stick through kit kat? I really appreciate all of the help. Great website. Great people.
Many people have had success with rooting by using Towelroot.
The sim unlock is permanent.
Let me know how it goes for you @thepar. I expect to be updating to kitkat in the coming week.
For the benefit of those searching the forums to unlock their phones my experience may be of help to those on 4.1.2 or possibly even MJ2. I have had my SGS3 since June 2013 and only allowed one update, that was to 4.1.2. My phone was rooted long ago, but I just unlocked it earlier today and that was with a custom recovery in place and without unrooting. In my case I did not revert to the 4.1.1 rom. I did downgrade the modem to dlk3, that of 4.1.1 while leaving the rom and bootloader at MG2. After completing the unlock I upgraded the modem back to MG2. I have confirmed that SMS, MMS, phone, and wifi functionality is intact.
In truth, I will probably not go back to stock to get to kitkat. I am considering upgrading to the leaked MJ2/4.3 bootloader and MJB modem and then flash a kitkat rom which will work on them, there are several.
I just did the unlock yesterday. I need to find someone with a t-mobile sim to test if the unlock worked. Will I still be able to update the OS even though it is on rooted stock? What will it update me too?
I am kind of debating if I should install a custom rom minus KNOX.
thepar said:
I just did the unlock yesterday. I need to find someone with a t-mobile sim to test if the unlock worked. Will I still be able to update the OS even though it is on rooted stock? What will it update me too?
I am kind of debating if I should install a custom rom minus KNOX.
Click to expand...
Click to collapse
If you want to run an OTA update, you need stock recovery and an unrooted system.
I have a stock recovery but the os is rooted. I don't mind using oden to update the os. I might be better to install a rom with knox removed. I can't seem to find 4.1.1 stock unrooted. I did find 4.0.1 ICS.
You can find a stock ATT 4.1.1 ROM on sammobile.com.
You cannot use Odin to flash a stock KK ROM because it was never released in an Odin format by ATT. ATT provided the KK update via OTA updates. Complete KK updates were provided for i747m only.
Thanks so much!! downloading now.
Let us know what happens. Cheers
I have decided to go custom rom route. It is better to update stock ota first then install custom rom or custom rom straight from 4.1.1?
Hi,
I am moving from AT&T to T-Mobile. My phone is AT&T version, unlocked, rooted stock 5.0.1 OC4
In the AT&T version, I've followed instruction in http://forum.xda-developers.com/galaxy-s4-att/general/how-to-update-to-i337oc3-5-0-1-keeproot-t3075814
The main step essentially is to 1) flash a rooted ROM and 2) ODIN the boot loader.
Will this work with T-mobile ROM and Bootloader to convert it?
Thanks
I realized that the problem is that the bootloader is locked. So need safestrap.
Found some detailed instruction on using safestrap to install custom ROM.
[url]http://galaxys4root.com/galaxy-s4-root/how-to-install-custom-rom-on-verizon-galaxy-s4-with-me7-firmware-safestrap/[/URL]
Where can I find safestrap-ready rooted 5.x T-mobile ROM?
Thanks
redhonker said:
I realized that the problem is that the bootloader is locked. So need safestrap.
Found some detailed instruction on using safestrap to install custom ROM.
[url]http://galaxys4root.com/galaxy...erizon-galaxy-s4-with-me7-firmware-safestrap/[/URL]
Where can I find safestrap-ready rooted 5.x T-mobile ROM?
Thanks
Click to expand...
Click to collapse
There is no T-Mobile 5.x rom, T-Mobile stopped updating the S4 at 4.4.4
Sent from my GT-I9505G using Tapatalk