Related
Every since the root method came out, I've been trying to root my phone for hours and hours and I haven't been able to. Since this is a problem for quite a few other users, I figured we should have a thread just for this problem since the rooting thread is over 30 pages long at this point.
My problem is that I see the device in offline mode for a few seconds, and after that it displays an empty list again.
What I'd like to know from people who managed to root their phones, if they had to try something different from the instructions to get passed the adb loop step where you have to catch the device in offline mode? What OS are you running (Win, Mac, Linux and x86 or x64)? How many times did you try?
I got past the loop by hitting ctrl c as soon as it detected the device it worked for me. it seems if you let the loop continue and you get device not connected you have to try again. I was able to get this to work consistently twice.
Getting the adb portion of this is what took me the longest in the rooting process.
Had your same problem on Ubuntu
Had same problem on windows 7 64 bit
UNTIL:
installed pda net - then htc sync, then removed android device driver, then installed the (r3) driver from android sdk... the update you can download through their program.
After that it worked like a charm first time.
my best advice is to start running the loop just before you click recovery from the boot loader screen.
Once you got it, theres no need to be quick with control C - it stays there.
- Faylix / local
the PDANET program seems to mess with the offline loop thing.
Once I closed it, it goes through just fine..
The only problem im having is that im getting a E:Failid to verify whole-file signature when i push the update.zip
And also I've used both Windows 7 64bit and XP 32bit to no avail...
My guess is its all about the drivers. I must have mine all mixed up. I am stuck in loop with no device found either. I will try one more time with pdanet off but Ive tried on a pc without it too anyways.
Someone really needs to write an indepth guide like the G1 because drivers arent even meantioned in the guide and I know its a big part of it especially if you have had other android devices before with sdk plus adb. One thing I do notice is all of us with the loop issue have touble with the device showing in device manager. It displays android 1.0 instead of mts or adb whatever it supposed to be. If your device isnt recognized from hboot it wont make the proper jump into recovery. Hence the loop issue. Can anyone with root ellaborate this a bit more?
@jnight
You're very close. I had this happen to me too. What's happening to you is the first try failed but the update.zip still got pushed to the SD Card. Here's what you do:
1) adb push ota.zip /sdcard/update.zip
2) Type in "push update.zip /sdcard/" on your computer but don't push enter yet
3) Choose "install update.zip" in the phone. AS SOON AS the green bar appears behind the letters, press enter on your computer.
If you miss the timing and don't see clockwork recovery, you NEED to go back to my step 1("adb push ota.zip /sdcard/update.zip") or it will continue to fail no matter how many times you try because you HAVE to start with ota.zip as the update.zip on the SD card. The trick is getting the phone to verify the signature from the ota.zip and replacing it with update.zip to enter the clockwork recovery. Once you're in clockwork recovery, it's a breeze- just follow the rest of the stickied root tutorial. Hope this helped
shinkinrui said:
@jnight
You're very close. I had this happen to me too. What's happening to you is the first try failed but the update.zip still got pushed to the SD Card. Here's what you do:
1) adb push ota.zip /sdcard/update.zip
2) Type in "push update.zip /sdcard/" on your computer but don't push enter yet
3) Choose "install update.zip" in the phone. AS SOON AS the green bar appears behind the letters, press enter on your computer.
If you miss the timing and don't see clockwork recovery, you NEED to go back to my step 1("adb push ota.zip /sdcard/update.zip") or it will continue to fail no matter how many times you try because you HAVE to start with ota.zip as the update.zip on the SD card. The trick is getting the phone to verify the signature from the ota.zip and replacing it with update.zip to enter the clockwork recovery. Once you're in clockwork recovery, it's a breeze- just follow the rest of the stickied root tutorial. Hope this helped
Click to expand...
Click to collapse
You are a godsend. Spent the last two hours trying to time this just right by doing Step 2 and 3 over and over and over. 5 minutes after reading this post - Hello, Clockwork.
Lol
shinkinrui said:
@jnight
You're very close. I had this happen to me too. What's happening to you is the first try failed but the update.zip still got pushed to the SD Card. Here's what you do:
1) adb push ota.zip /sdcard/update.zip
2) Type in "push update.zip /sdcard/" on your computer but don't push enter yet
3) Choose "install update.zip" in the phone. AS SOON AS the green bar appears behind the letters, press enter on your computer.
If you miss the timing and don't see clockwork recovery, you NEED to go back to my step 1("adb push ota.zip /sdcard/update.zip") or it will continue to fail no matter how many times you try because you HAVE to start with ota.zip as the update.zip on the SD card. The trick is getting the phone to verify the signature from the ota.zip and replacing it with update.zip to enter the clockwork recovery. Once you're in clockwork recovery, it's a breeze- just follow the rest of the stickied root tutorial. Hope this helped
Click to expand...
Click to collapse
I was having some trouble to, I found something else that I was gonna add but it was only on my end... I didn't have the same problem rooting my wifes. I will watch this thread and if I see any more posts I will drop my piece. Im glad someone else could post this before I could.
shinkinrui said:
@jnight
You're very close. I had this happen to me too. What's happening to you is the first try failed but the update.zip still got pushed to the SD Card. Here's what you do:
1) adb push ota.zip /sdcard/update.zip
2) Type in "push update.zip /sdcard/" on your computer but don't push enter yet
3) Choose "install update.zip" in the phone. AS SOON AS the green bar appears behind the letters, press enter on your computer.
If you miss the timing and don't see clockwork recovery, you NEED to go back to my step 1("adb push ota.zip /sdcard/update.zip") or it will continue to fail no matter how many times you try because you HAVE to start with ota.zip as the update.zip on the SD card. The trick is getting the phone to verify the signature from the ota.zip and replacing it with update.zip to enter the clockwork recovery. Once you're in clockwork recovery, it's a breeze- just follow the rest of the stickied root tutorial. Hope this helped
Click to expand...
Click to collapse
Thanks Man, I guess I was pressing the Enter button to fast...
Got past eveything except the "SU" it says "Permission Denied"
NM about this post for some reason it started working after I installed "Setcpu". Went in to Terminal emulator and it gives me the # just fine..
For some reason its just ADB that gives Permission Denied..
"Step 18.
adb install Superuser.apk (If this looks like it works, but says it cannot locate directories, make sure you can find your device using adb devices… If things still don't work, my best advice is to start over)
Step 19.
After Superuser is installed try to use adb to shell to your device.
adb shell
you will get a $
Then type su
Superuser should pop-up asking if you give permission, do so.
Your $ should turn into a #. If so, you have root."
Make sure you run this or you wont get SU rights, this programs needs to be installed to allow the SU rights.
AngelsShadow said:
"Step 18.
adb install Superuser.apk (If this looks like it works, but says it cannot locate directories, make sure you can find your device using adb devices… If things still don't work, my best advice is to start over)
Step 19.
After Superuser is installed try to use adb to shell to your device.
adb shell
you will get a $
Then type su
Superuser should pop-up asking if you give permission, do so.
Your $ should turn into a #. If so, you have root."
Make sure you run this or you wont get SU rights, this programs needs to be installed to allow the SU rights.
Click to expand...
Click to collapse
Thank you thank you....
I've been repeating myself over and over regarding this...
It's the Number 1 issue why people can't Root & Flash to the ENGINEER Build!!
Still a no go
Marvin,
I am still getting the two device OFFLINE showing after going into recovery from hboot. I deleted ALL of the HTC SYNC software and drivers and ONLY installed PDAnet. I now can see the MY TOUCH SLIDE device when connected in hboot, unfortunately I still am having the same stupid problem. So since it's not showing android 1.0 anymore and still having the same problems, we might have to explore some other avenues. FOR THE LOVE OF ROOT SOMEONE PLEASE HELP US!!!
If you run loop and go to recovery and only see the device offline a couple times then it goes away, I do not think it is a driver issue at that point. As someone in the root thread explained, the loop is simply trying to catch the device in ADB mode as it's going into recovery. And then, randomly, it will "stick" in ADB mode. Now, I am not sure if there is a difference between our devices for those of us having trouble getting the ADB mode to stick.
Ok, I'm giving up. I have tried this hundreds and hundreds of times. I know I've followed the instructions the correct way (I've seen the video and read countless forum posts). This simply cannot be done on my phone. I am going to take it to the store and try to exchange it, perhaps for a black one.
Does anyone else have any suggestions?
as i posted in the other thread i was having problems trying to get adb "stick" open when i went from the bootloader into recovery so i went into the file explorer and right clicked on my computer then went to manage devices then went to the driver tab then clicked on update driver right before i went into recovery and this is what finally worked for me. the purpose wasnt to change the driver the purpose was to trick my computer into keeping adb open
Re: Getting passed the adb loop step
I had to hit power on phone and enter on pc at almost the same time to get it working. Then I realized that after you reboot, it boots back to your normal phone not recovery and then adb devices it shows up.
-------------------------------------
Sent via the XDA Tapatalk App
Re: Getting passed the adb loop step
Ugh none of these tricks have worked for me.. Still Stuck .. Maybe it's a computer issue.. Guess ill try a friends computer..
-------------------------------------
Sent via the XDA Tapatalk App
Maybe/hopefully someone will find a different/easier way to root these for those of us stuck here. I've also tried, exhausting many many things, everything from timing of hitting loop/recovery, all the way to almost completely breaking the ADB driver on my PC. This is thoroughly frustrating the hell out of me.
By the way, add "ECHO OFF" (without the quotes) to the top of the batch file. It makes it easier to see when it reads out the offline devices.
Re: Getting passed the adb loop step
If you go to settings then pc connection . What seeting should it be? Drive , sync, or charge?
-------------------------------------
Sent via the XDA Tapatalk App
EDIT:
I was trying to reflash JB 4.3 because of storage issues but unfortunately I accidentally deleted and formatted internal and sd storage, so Im left with no OS on my Gnex but I can boot on recovery and fastboot. Also before I deleted the internal I did not enable usb debugging yet at that time. Is there a way I can flash a stock image by just using toolkit? ty
I tried pushing through fastboot mode but it says error: device not found. I only have the platform tools on my pc.
UPDATE:
Finally got the file pushed into the sd card doing via recovery. Since I am using TWRP recevery it was not too obvious how to do it unlike CWRM which I used to use. I spent more than 24 hours looking for the right solution that would work for me and funny thing was I finally got the right way to one of the first threads i looked into but just didnt pay much attention to it which was here http://forum.xda-developers.com/showthread.php?t=1667929
"Boot your phone into Recovery and select the "Mounts & Storage" screen
- Plug your phone into your computer using USB Data Transfer Cable
- Ensure in Recovery that your phone shows "Unmount /sdcard/" and "Unmount /system/" (If they do not show this automatically, just press each one once respectively as pressing just toggles Mount and Unmount)
- Open Command Prompt on your computer by doing Start -> Run -> cmd
- In Command Prompt, type "cd c:\AndroidSDK\tools" replacing AndroidSDK\tools with wherever your adb and ROM are located.
- This is probably the most important part - Still in Command Prompt, type "adb push ROM.zip /sdcard/ROM.zip" replacing ROM with the EXACT name of the ROM file and including the .zip piece on both ends. This may take a minute or two...or four, but you will see a message in Command Prompt saying something like <12345678kb to 1234567kb>. That is just telling you that the file was pushed properly. (I did not include that message in the picture below)"
lastforone said:
Instead of using a toolkit, just push a rom to ur sdcard using adb and flash it via recovery.. Or you can download the official image, boot into fastboot and flash it..
-
L4.1
Click to expand...
Click to collapse
You were right on spot unfortunately I didnt know how to do it. Thank you anyways...:highfive::highfive::highfive:
Ty for all those who tried to help me, thank you for the effort, well it was indeed a learning experience... ahihihihi
Instead of using a toolkit, just push a rom to ur sdcard using adb and flash it via recovery.. Or you can download the official image, boot into fastboot and flash it..
-
L4.1
lastforone said:
Instead of using a toolkit, just push a file to ur sdcard using adb and flash it... Or you can download the official image, boot into fastboot and flash it..
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
well then i need to download sdk first ty anyways
lolobabes said:
well then i need to download sdk first ty anyways
Click to expand...
Click to collapse
You do not need the whole sdk package. Just the adb + fastboot and few required files ... You can find the zip in erants guide..
Sent from my Galaxy Nexus using xda app-developers app
when i tried to push error device not found lol
lolobabes said:
when i tried to push error device not found lol
Click to expand...
Click to collapse
Use adb sideload from twrp and send the zip from your PC to your phone.
Sent from my Galaxy Nexus using xda app-developers app
lolobabes said:
when i tried to push error device not found lol
Click to expand...
Click to collapse
Go into your device manager if you have windows, and see if you have any errors.
If you do, you might have an exclamation mark for the device: Galaxy. You can manually install the drivers from here, point it to your toolkit, I guess, since you downloaded it already.
If he reads efrant's "android 101" -which is STICKIED ON GENERAL forum- just the first post, he'll know everything and downloaded everything he needs to know and have to interact with his device.
a manta wrote this.
Beauenheim said:
Go into your device manager if you have windows, and see if you have any errors.
If you do, you might have an exclamation mark for the device: Galaxy. You can manually install the drivers from here, point it to your toolkit, I guess, since you downloaded it already.
Click to expand...
Click to collapse
When I am on recovery yes theres an exclamation on samsung mtp device but in fastboot mode the samsung mtp does not appear but when I do fastboot devices there appears a device number so I thought I can do it on fastboot. thank you.
beekay201 said:
If he reads efrant's "android 101" -which is STICKIED ON GENERAL forum- just the first post, he'll know everything and downloaded everything he needs to know and have to interact with his device.
a manta wrote this.
Click to expand...
Click to collapse
I have read that already however I was hoping to just flash a file to the sdcard if is even possible considering I have formatted both internal and sdcard. I am very new to adb so its an easier way for me. But it seems then I will ave to do it the hard way. Thanks
PS
Not sure if this has any bearing but when I accidentally formated internal and sdcard it was a fresh 4.3 install and so android debugging was not enabled. Thanks
lolobabes said:
PS
Not sure if this has any bearing but when I accidentally formated internal and sdcard it was a fresh 4.3 install and so android debugging was not enabled. Thanks
Click to expand...
Click to collapse
Doesn't matter because if you reboot in bootloader you can use fastboot(if drivers are installed properly), fastboot always works, you don't need to enable anything for it.
sui785 said:
Doesn't matter because if you reboot in bootloader you can use fastboot(if drivers are installed properly), fastboot always works, you don't need to enable anything for it.
Click to expand...
Click to collapse
So meaning I can use fastboot to just push file to sdcard right? Tried to look for the right command but I cant seem to find the right one that works for me. Thank you.
tried doing this in fastboot "adb push romname.zip /sdcard/ROM/" had this error: device not found
lolobabes said:
tried doing this in fastboot "adb push romname.zip /sdcard/ROM/" had this error: device not found
Click to expand...
Click to collapse
Take it out of a USB 3.0 port.
lolobabes said:
tried doing this in fastboot "adb push romname.zip /sdcard/ROM/" had this error: device not found
Click to expand...
Click to collapse
lolobabes said:
So meaning I can use fastboot to just push file to sdcard right? Tried to look for the right command but I cant seem to find the right one that works for me. Thank you.
Click to expand...
Click to collapse
no, there's no ADB interface on FASTBOOT interface. You'll never be able to push anything through ADB in FASTBOOT interface. Please read the thread i talked about earlier, and this one too -> http://forum.xda-developers.com/showthread.php?t=1626895 - Just the first post of each will do.
Beauenheim said:
Take it out of a USB 3.0 port.
Click to expand...
Click to collapse
*EPIC*
*facedesk*
*grows more white hair*
xD I actually had this issue a few days ago, had issues for 4 hours, realized I had my cord plugged in a 3.0 port.
Really dumb noob moment.
UPDATE:
Finally got the file pushed into the sd card doing via recovery. Since I am using TWRP recevery it was not too obvious how to do it unlike CWRM which I used to use. I spent more than 24 hours looking for the right solution that would work for me and funny thing was I finally got the right way to one of the first threads i looked into but just didnt pay much attention to it which was here http://forum.xda-developers.com/showthread.php?t=1667929
"Boot your phone into Recovery and select the "Mounts & Storage" screen
- Plug your phone into your computer using USB Data Transfer Cable
- Ensure in Recovery that your phone shows "Unmount /sdcard/" and "Unmount /system/" (If they do not show this automatically, just press each one once respectively as pressing just toggles Mount and Unmount)
- Open Command Prompt on your computer by doing Start -> Run -> cmd
- In Command Prompt, type "cd c:\AndroidSDK\tools" replacing AndroidSDK\tools with wherever your adb and ROM are located.
- This is probably the most important part - Still in Command Prompt, type "adb push ROM.zip /sdcard/ROM.zip" replacing ROM with the EXACT name of the ROM file and including the .zip piece on both ends. This may take a minute or two...or four, but you will see a message in Command Prompt saying something like <12345678kb to 1234567kb>. That is just telling you that the file was pushed properly. (I did not include that message in the picture below)"
lastforone said:
Instead of using a toolkit, just push a rom to ur sdcard using adb and flash it via recovery.. Or you can download the official image, boot into fastboot and flash it..
-
L4.1
Click to expand...
Click to collapse
You were right on spot unfortunately I didnt know how to do it. Thank you anyways...:highfive::highfive::highfive:
Ty for all those who tried to help me, thank you for the effort, well it was indeed a learning experience... ahihihihi
lolobabes said:
UPDATE:
Finally got the file pushed into the sd card doing via recovery. Since I am using TWRP recevery it was not too obvious how to do it unlike CWRM which I used to use. I spent more than 24 hours looking for the right solution that would work for me and funny thing was I finally got the right way to one of the first threads i looked into but just didnt pay much attention to it which was here http://forum.xda-developers.com/showthread.php?t=1667929
"Boot your phone into Recovery and select the "Mounts & Storage" screen
- Plug your phone into your computer using USB Data Transfer Cable
- Ensure in Recovery that your phone shows "Unmount /sdcard/" and "Unmount /system/" (If they do not show this automatically, just press each one once respectively as pressing just toggles Mount and Unmount)
- Open Command Prompt on your computer by doing Start -> Run -> cmd
- In Command Prompt, type "cd c:\AndroidSDK\tools" replacing AndroidSDK\tools with wherever your adb and ROM are located.
- This is probably the most important part - Still in Command Prompt, type "adb push ROM.zip /sdcard/ROM.zip" replacing ROM with the EXACT name of the ROM file and including the .zip piece on both ends. This may take a minute or two...or four, but you will see a message in Command Prompt saying something like <12345678kb to 1234567kb>. That is just telling you that the file was pushed properly. (I did not include that message in the picture below)"
You were right on spot unfortunately I didnt know how to do it. Thank you anyways...:highfive::highfive::highfive:
Ty for all those who tried to help me, thank you for the effort, well it was indeed a learning experience... ahihihihi
Click to expand...
Click to collapse
I'm glad you sorted it out, that's the thing instead of teaching you step by step just left a hint on what you should do, helps you learn to do it on your own..
Peace,
L4.1
Thanks
Thanks for this. Was stuck with no factory image because had to wipe data because of encryption. Then was in dilemma of how to load the ZIP to sdcard without having to reflash the stock all over. This saved me the time. Thanks again
Hello, I Have a Kindle Fire 1st Gen. I Had CM 10.1 on it. I was attempting to put AOSP back on it for My Wife. I did I Noobish Move at 4 am half asleep, I Did NOT go into advanced mode in TWRP and uncheck DATA in the Wipe tab. So This Screwed me "Bricked" Message comes up in TWRP when rebooting, says ( NO OS ) . I have Tried Kindle unbrick utility with no success when clicking on "Stuck at Logo" in utility I get this Error ...> PIC Attatched!>
I then Tried Using android-sdk ( I have went in and edited the files that need to be edited in program files/android...> File_android_winusb as well as in .android folder in the appdata location) Along with CMD & I get a Error So far into the process of Resetting Kindle OS. Pic Attatched as well. It Seems Like I have something missing ?!?!?
I somewhat Suck at CMD, I don't have much experience with it, so Please go slow on me,when Giving advise....
Thanks In Advance!!
If you still have access to TWRP, use it to mount your sdcard to USB.
soupmagnet said:
If you still have access to TWRP, use it to mount your sdcard to USB.
Click to expand...
Click to collapse
I Tried That. I See the Device But when double clicking, It will not let me access it.
Butt Nugget said:
I Tried That. I See the Device But when double clicking, It will not let me access it.
Click to expand...
Click to collapse
Oh that's right, it won't work on 2nd generation devices.
Do you have your drivers installed? Are you able to send any adb commands (adb devices)?
soupmagnet said:
Oh that's right, it won't work on 2nd generation devices.
Do you have your drivers installed? Are you able to send any adb commands (adb devices)?
Click to expand...
Click to collapse
My Kindle is a 1st Gen. I'm not sure If I understand what You are talking about when You say "send Commands/devices" If Your talking about in CMD I Get all the way to Seeing my Device Serial Number for Kindle. The when I type "adb shell" I get a error saying (Failed: No such file or directory <2> - ) You can see this in the screen shot I attached to this thread..
Sorry, I looked at what forum this was in and got a little confused...silly me :silly:
Anyway, back on track...
You should not be receiving that error in TWRP. If you are, then something is seriously wrong with it and probably needs to be reinstalled. Other than that, I'm having trouble seeing where the problem is. (the pic shows that you're not in recovery, btw)
You clearly have access to adb, so...why aren't you using 'adb push' to transfer a new ROM to your sdcard to flash in recovery?
soupmagnet said:
Sorry, I looked at what forum this was in and got a little confused...silly me :silly:
Anyway, back on track...
You should not be receiving that error in TWRP. If you are, then something is seriously wrong with it and probably needs to be reinstalled. Other than that, I'm having trouble seeing where the problem is. (the pic shows that you're not in recovery, btw)
You clearly have access to adb, so...why aren't you using 'adb push' to transfer a new ROM to your sdcard to flash in recovery?
Click to expand...
Click to collapse
I've Done searches and only found how to attempt recovery, typing in commands on pc's CMD Prompt while kindle is mounted to usb in twrp and typing commands in on CMD in pc I installed Android SDK and Device driver. So Sounds possibly what I tried is totally different from what Your asking if i done? If So, Could You Explain step by step thee method with new roms or send me in the right directions 2 a how to link or video? Anything I would appreciate GREATLY! :fingers-crossed:
Butt Nugget said:
I've Done searches and only found how to attempt recovery, typing in commands on pc's CMD Prompt while kindle is mounted to usb in twrp and typing commands in on CMD in pc I installed Android SDK and Device driver.
Click to expand...
Click to collapse
I have no idea what you're saying.
All you need to do is, boot into recovery (TWRP), use adb to "push" a ROM to your sdcard (adb push...), then install the ROM in recovery.
soupmagnet said:
I have no idea what you're saying.
All you need to do is, boot into recovery (TWRP), use adb to "push" a ROM to your sdcard (adb push...), then install the ROM in recovery.
Click to expand...
Click to collapse
I mentioned Earlier (say, the Drive of the device is :F) In My computer, When I click :F It states Cannot access (Drivers are installed for kindle). I'm asking How Can I Mount USB in TWRP and Put ROM File on sdcard when I cannot access it... I Do Not have a Micro USB OTG to USB 2.0 Cable to plug up to kindle with the files put on a external HD to complete this course.
Does that make more since?
Butt Nugget said:
I mentioned Earlier (say, the Drive of the device is :F) In My computer, When I click :F It states Cannot access (Drivers are installed for kindle). I'm asking How Can I Mount USB in TWRP and Put ROM File on sdcard when I cannot access it... I Do Not have a Micro USB OTG to USB 2.0 Cable to plug up to kindle with the files put on a external HD to complete this course.
Does that make more since?
Click to expand...
Click to collapse
Try to understand what you're being told. I'm not saying anything about mounting your sdcard to transfer files to it so get that idea out of your head for a moment.
You need to boot into recovery and use the command 'adb push' to transfer a ROM to your sdcard, then flash it in recovery.
Now, does that make more sense?
soupmagnet said:
Try to understand what you're being told. I'm not saying anything about mounting your sdcard to transfer files to it so get that idea out of your head for a moment.
You need to boot into recovery and use the command 'adb push' to transfer a ROM to your sdcard, then flash it in recovery.
Now, does that make more sense?
Click to expand...
Click to collapse
I am attempting to understand what u are saying But I'm thinking ur not giving full step after step instructions OR this Version I have (v2.6.0.0) differs from Yours, Because there is No such OPTION as ADB PUSH..... I have ADB sideload (under Advanced Tab) which only wipes Cashe.. I've looked in every single area in TWRP and see nothing of anything You are talking about, other than "MOUNT" obviously.
soupmagnet said:
Try to understand what you're being told. I'm not saying anything about mounting your sdcard to transfer files to it so get that idea out of your head for a moment.
You need to boot into recovery and use the command 'adb push' to transfer a ROM to your sdcard, then flash it in recovery.
Now, does that make more sense?
Click to expand...
Click to collapse
While Searching Google for Help I seen this..> http://forum.xda-developers.com/showthread.php?t=2361144
I'm bout to install a Pc with Linux and try pushing it that way.. Have not tried that.
You don't need Linux to run adb commands *face palm* While I am a linux enthusiast, all he's trying to say is boot into twrp, plug kindle into your PC, and open a command prompt, CD into the directory of adb and run "adb push pathtofile /sdcard/filename" this should push it to the kindle, though their might be something else u need for in prior to this I'm not sure, soupemagnet will probably post back if there is. BTW I don't know if u actually meant u were going to install Linux, but if you don't plan on using it after this or anything in the case u do decide to still use it for this, u don't need to install it, distros like Ubuntu let you boot into a full os from the CD so u don't need to install it.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
stunts513 said:
You don't need Linux to run adb commands *face palm* While I am a linux enthusiast, all he's trying to say is boot into twrp, plug kindle into your PC, and open a command prompt, CD into the directory of adb and run "adb push pathtofile /sdcard/filename" this should push it to the kindle, though their might be something else u need for in prior to this I'm not sure, soupemagnet will probably post back if there is. BTW I don't know if u actually meant u were going to install Linux, but if you don't plan on using it after this or anything in the case u do decide to still use it for this, u don't need to install it, distros like Ubuntu let you boot into a full os from the CD so u don't need to install it.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
Stunt Thnx... You Helped breaking it down. I just used KFU and Fixed this within 3 minutes.. Thnx Man!:good:
I was doing a factory reset on my Rogers Note 2, and I accidentally wiped the internal storage. So my phone now just stays at the Samsung logo, I have TWRP 2.6.3 I believe, and it says I have no OS installed. So im trying to copy a Rom (zip format) to my phone to install. I figured this would solve my problem, but my computer won't read my phone, it install as an adb device, but doesn't show up in my computer. So I installed the Samsung Galaxy Toolkit, latest version, went through the setup and installed the drivers. When I try to push files to my phone, it says it is waiting for USB debugging to be enabled. I have no idea how to use this, as I've only seen this option in the Android itself. Could anyone help me out on how to copy over a file to my phone so I can reinstall it and get my phone working again, it would be greatly appreciated
Adrian92 said:
I was doing a factory reset on my Rogers Note 2, and I accidentally wiped the internal storage. So my phone now just stays at the Samsung logo, I have TWRP 2.6.3 I believe, and it says I have no OS installed. So im trying to copy a Rom (zip format) to my phone to install. I figured this would solve my problem, but my computer won't read my phone, it install as an adb device, but doesn't show up in my computer. So I installed the Samsung Galaxy Toolkit, latest version, went through the setup and installed the drivers. When I try to push files to my phone, it says it is waiting for USB debugging to be enabled. I have no idea how to use this, as I've only seen this option in the Android itself. Could anyone help me out on how to copy over a file to my phone so I can reinstall it and get my phone working again, it would be greatly appreciated
Click to expand...
Click to collapse
Do you have an external sdcard in the phone? If so can you take it out and put into an sdcard reader and plug it int your PC. Then it will show up as a Drive.
If not.....
Do you have just adb.exe by itself ? No?
Download here ... http://androidarea51.com/downloads/adb.zip
Unzip to a directory where you can find it/ Like c:\adb
Reboot your phone into TWRP recovery. Put in down, do not touch it.
Go to a command prompt, cd c:\adb (or wherever you unzipped adb.zip)
type adb push whatevertheromnameis.zip /sdcard/romname.zip
Pick up phone, click install and choose file to install from sdcard
Should work fine.
dicksteele said:
Do you have an external sdcard in the phone? If so can you take it out and put into an sdcard reader and plug it int your PC. Then it will show up as a Drive.
If not.....
Do you have just adb.exe by itself ? No?
Download here ...
Unzip to a directory where you can find it/ Like c:\adb
Reboot your phone into TWRP recovery. Put in down, do not touch it.
Go to a command prompt, cd c:\adb (or wherever you unzipped adb.zip)
type adb push whatevertheromnameis.zip /sdcard/romname.zip
Pick up phone, click install and choose file to install from sdcard
Should work fine.
Click to expand...
Click to collapse
Hey thanks for the reply, I had nothing to put the sd card into, and pushing the zip didnt work. I ended up installing the zip from adb with the samsung galaxy toolkit and that worked. Thanks for your help, I have another question, could you point me in the right direction on how to upgrade my note 2 to 4.3?
Adrian92 said:
Hey thanks for the reply, I had nothing to put the sd card into, and pushing the zip didnt work. I ended up installing the zip from adb with the samsung galaxy toolkit and that worked. Thanks for your help, I have another question, could you point me in the right direction on how to upgrade my note 2 to 4.3?
Click to expand...
Click to collapse
Go to sammobile.com. create an account it's free. 4.3 is available. Click on firmwares and it guide you thru it. By choosing phone model
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
I am Trying to flash the stock rom via side load i flashed that few days back to at that time it was flashed success fully but now it always gives me error
Code:
"C:\android-sdk\platform-tools>adb sideload OnePlus3TOxygen_28_OTA_039_all_1701140132_de9036f11e2246a8.zip
loading: 'OnePlus3TOxygen_28_OTA_039_all_1701140132_de9036f11e2246a8.zip'
* cannot read 'OnePlus3TOxygen_28_OTA_039_all_1701140132_de9036f11e2246a8.zip' *
C:\android-sdk\platform-tools>adb sideload <OnePlus3TOxygen_28_OTA_039_all_1701140132_de9036f11e2246a8.zip>
The syntax of the command is incorrect.
C:\android-sdk\platform-tools>"
Mine would not sideload either. I downloaded the zip file to my PC, connected the phone to the PC, put the phone in USB mode, dragged the zip file from the PC to the phone root directory, disconnected from the PC, and flashed the ROM from the phone hard drive.
Faulty ADB drivers I guess. If you have TWRP you can try adb push name /sdcard/
Puddi_Puddin said:
Faulty ADB drivers I guess.
Click to expand...
Click to collapse
Isn't obvious this is not a driver problem?! Read the error message that is staring him in the face. He has not specified the correct file/path.
bulletmark said:
Isn't obvious this is not a driver problem?! Read the error message that is staring him in the face. He has not specified the correct file/path.
Click to expand...
Click to collapse
Second one is a invalid command because of those <> first command mainly happenda with wrong drivers, I and many other get the error it is quite unexplainable.
Any resolution to this? I'm getting the same problem, saying it cannot read the zip file when I try to sideload
trying to update my wifes phone now. getting the same issue. i typed in adb devices and it shows up, so i know its not driver related. wonder if its a faulty image? ill keep trying
---------- Post added at 03:59 AM ---------- Previous post was at 03:55 AM ----------
funny i think i just foud the issue. someone posted saying older adbs cant see larger than 1gb (i have a opo so never even heard of this). ill give it a try and report back...
this is the adb ill be using https://forum.xda-developers.com/showthread.php?t=2317790
Okay, now that may work for others but I could not get it... Sorry
I ended up just removing the encryption, flashing twrp, and flashing OOS that way. Make sure to make a backup... I made a backup of everything... Except contacts because I thought gmail handled that like on my phone. I left my wife a note saying sorry for when she wakes up ha.
At least the annoying updates available message will be gone that we've had since Aug or something
I was getting the exact same errors and was frustrated to no end..... till I figured out how to fix it =)
I had to use this program on my adb.exe to make it large address aware
https://www.techpowerup.com/forums/threads/large-address-aware.112556/
Grab the laa_2_0_4.zip from the website, open and run as administrator
Click on select executable and go to where your adb.exe is installed, for me it was in C:\adb\adb.exe
Then make sure the checkbox on step 2 is selected and then hit save
I rebooted my PC and upon using the adb on reboot I was finally able to flash the stock OOS roms via adb sideload on my phone
Yipeee!!
shoemocker said:
I was getting the exact same errors and was frustrated to no end..... till I figured out how to fix it =)
I had to use this program on my adb.exe to make it large address aware
https://www.techpowerup.com/forums/threads/large-address-aware.112556/
Grab the laa_2_0_4.zip from the website, open and run as administrator
Click on select executable and go to where your adb.exe is installed, for me it was in C:\adb\adb.exe
Then make sure the checkbox on step 2 is selected and then hit save
I rebooted my PC and upon using the adb on reboot I was finally able to flash the stock OOS roms via adb sideload on my phone
Yipeee!!
Click to expand...
Click to collapse
I used the same tool