This is the guide to root Multiphone Pap5300duo and 4500 running on stock 4.1.2 firmware v.1.0.16
first ensure you have drivers for prestigio, you can get them here
Enable USB Debugging in phone (settings/developer options/tick usb debugging)
Phone will AUTOMATICALY install it's own ADB Driver.
If U have any other driver installed remove it
Unplug phone, and leave usb debuging on
Install MOBOROBO tool
Plug in prestigio device
Wait untill program recognises your device
Unplug device
Step 2:
Install VROOT 1.60 English
Run program and leave it to update on 1.70
Now plug your device
If everything is ok You will get progress like on the picture
View attachment 2368233
Press ROOT, the green button,
Device will now reboot
If all went ok, after reboot, you will get pic like this
View attachment 2368244
Congrats your Prestigio is now rooted
SuperUser manager is on chinese language
For enabling root permission after popup window click on the right button
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
after achieving root you can speed up your device with set cpu aplication
you can download the Set cpu v 3.1.0 apk here
just give the root permision to set cpu and set minimal and maximum cpu to bigger value,careful it will decrease battery life
recovery custom
thanks for the guide. a question: with this procedure, you install the custom recovery?
Worked for Prestigio 4500 :good:
Thanks man, i have been searching for ages for prestigio drivers, they just never wanted to be installed by windows itself. Root system worked for Prestigio multiphone PAP5430.
I'm looking to get this phone (5300) for a family member. Is this rooting method good to go for this phone, I ask as only the 4500 version has feedback.
Are there any ROMs available once rooted?
What custom recovery is available?
---
smash'n
Many thanks!:good:
what about prestigio pap5503
haw do i root prestigio multiphone pap5503
I note that in a previous thread about VROOT 1.60, malware was found and the SuperUser app would connect suspiciously to an address in China.
http://forum.xda-developers.com/showthread.php?t=2434453
VROOT 1.60 is not available from the link in this thread so perhaps that's a good thing.
Does anyone know of another root method for this phone?
...doesn't fare well for trusting Chinese phones and software in future!
Related
Hi,
I've got some trouble to get a proper root mod on my phone. After i used some of the hints which can be found in this forum i didn't managed to get it running.
History of my mod-trys:
I got it running until i patched my stock Rom to the latest version via fota. (the feature pack for German roms)
Then i tried to go back to a stock Rom here at the forum - but with little success. I installed it but important not able to get the root mod running without errors.
This is a screenshot of superuser:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If i try to update i am getting an error.
Sadly i don't know what to do now to get this fixed. Iused many fresh installs / cleanup etc but everytime i install the update.zip via recovery - its messed up.
gesendet mit Tapatalk 2
try to flash CWM with ODIN.. do not use adb shell because it needs root.. the try flash another ROM.. IT'S VERY RISKY.. I'M NOT RESPONSIBLE IF YOUR PHONE BRICKED
i've got cwm at the moment installed. As far as i understood the "root / unroot" thread it's not recommended to use this while rooting via recovery.
i used cwm to create a backup of my system and i rolled back it many times - so - thats working fine.
But my problem is that i don't find a suiteable custom rom for me - because it has to be "as stock as possbile". Meaning - i'm doing much development and testing with that phone - so it's not good if the mod can do things which i can't do with a stock rom. (Rooting is ok - i can handle that "mod" - if it works )
But i'm not firm enough with android core development to fix the root problem right now. Are there any manuals to use the "USB Debugging" Shell? I'm able to use that, too.
OR - if exsists - is there any _german_ stock rom out including the "value pack" addon? I just found a stock rom which is missing that. I guess there's coming with the value pack that causes rooting via update.zip going mad
i cant also root mine and i also have the value pack update but before i had the value pack i can still root my phone :CC
First of all let me clear to you that this is extended tutorial of
How to Install Jelly Bean 4.1 on Zync Z930 and also how to Root it by abdulmomin
After rooting by abdulmomin Tutorial i having problem of auto restarts,Lock out(when i lock tab, it never wake up)
So it's a fix for it..
NOTE:This is not tested on 4.0 ICS ,So if its not work on ICS upgrade to jelly bean 4.1.1 official tutorial available at
Code:
http://www.zync.in/index.php/support/software-firmware-downloads
.
Lets get started
1) Enable USB debugging, GOTO Settings > Developer options > check usb debugging
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2)Connect tablet to PC by using mini-USB cable (u got free with tab)
3)Download shuame from
Code:
www.shuame.com
site is in chines, dont waste time on traslator etc, just click on download :
4)Install Shuame , Launch it, wait for a minute.
It will detect your tablet & install its manager on ur tab.
if following screen arives ur tab is connected.
5)Click on LAST tab & click ROOT, refer picture.
6)Click next, refer picture.
7)let it finish it, your tab will restart 2-3 times,
Your done.
INSTALLing SuperSU
1)Download SuperSu & Root-uninstalller - Attached
2)Exctract achive & copy it to your tablet's SD_card or internal menory.
3)Uncheck the Unknown Sources from Setting > Security.
4)Install SuperSu & Root-uninstalller.
5)Open SuperSu , some chinese message will come accept it, refer ss,
Now it will ask for install binary accept it. . .
6)now Open Root-uninstalller and Accept the superuser rights ,click Grant.
goto end of the list uninstall last two chines apps.
7)Restart your TAB your done.
ENjoy
Nice tutorial, but I did not face any of the problems after rooting.
i can't get the drivers of zync z930. i downloaded all drivers in the forum but none of them works in my win 8 64
bit and win 7 64 bit. Please help . I updated the tab to jellybean but i m not able to root it.
==
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is the most easy method I´ve found so far.
Just make sure to enable Install from Unknown Sources.
How to Root Motorola Razr D1 XT914:
1. Install latest version of Framaroot and launch the app
2. Select "Boromir", then restart phone.
Now the phone is rooted! congrats and enjoy using advanced options and apps like Adfree, Titanium Backup and else.
You can check if it worked by looking for Superuser in your phone's app list
and by the way, remember to allow root access only to apps you really trust.
==
do you know something about a razr d1 update or custom rom?
i just have this information about 4.2 : http://www.upgrade-update-android.info/2013/04/upgradeupdate-motorola-razr-d1-to.html
unixr0cket said:
do you know something about a razr d1 update or custom rom?
i just have this information about 4.2 : (url)
Click to expand...
Click to collapse
Seems like a fake; it mentions a different phone model, meaning this method would brick the XT914.
sweet
worked fabulous
Hello There,
I just rooted my Razr D1, and now of course I would like to uninstall those bloated system apks, so the phone runs faster. As a newbie, I'm not sure which apks I can safely remove. Is there a list of them that I could use as a guidance ?
Thanks for any hint.
Best Wishes
jk6090 said:
Hello There,
I just rooted my Razr D1, and now of course I would like to uninstall those bloated system apks, so the phone runs faster. As a newbie, I'm not sure which apks I can safely remove. Is there a list of them that I could use as a guidance ?
Thanks for any hint.
Best Wishes
Click to expand...
Click to collapse
I haven't tried that, since it usually takes a lot of trial/error steps, you could instead try installing Greenify to make the phone faster, works great in mine.
Hello, I recently got xperia play, and decided to root my phone for better performance. Just for fun went to youtube and found this:
Then I remenbered this page, and just found few threads: http://forum.xda-developers.com/showthread.php?t=2240285 and http://forum.xda-developers.com/showthread.php?t=1312859.
My phone specs:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If I am correct, according to first thread above, I cant root my device and second one is saying that I cant install JB on my device.
AAAAAAAAND... Im totaly confused now and dont know what to do.
Can you be more clear on what exactly are you trying to achieve?
if you wanna root your phone you must enable "unknown sources" inside applications and also under developing you must enable "USB Debuging".
Then plug your phone in the usb while it's turned on normally and execute the run-me in the zerg rush files.
after that you can install rom manager and get a recovery going on,
when you do have a recovery going on you can use it to flash a new rom.
dev639 said:
Can you be more clear on what exactly are you trying to achieve?
if you wanna root your phone you must enable "unknown sources" inside applications and also under developing you must enable "USB Debuging".
Then plug your phone in the usb while it's turned on normally and execute the run-me in the zerg rush files.
after that you can install rom manager and get a recovery going on,
when you do have a recovery going on you can use it to flash a new rom.
Click to expand...
Click to collapse
Ok, I rooted my device, what is rom manager? CM10?
In this thread you will be guided to install a recovery
http://forum.xda-developers.com/showthread.php?t=1437840
It's basically install the apk ask the apk to install a recovery and you're done.
Now you will have theability to boot into recovery mode.
To do so you have to keep pressing volume down as you turn on your device.
You will then be able to proceed to installing custom roms.
You might also wanna research for flashtools from there on.
Hi,
I am a complete newbie when it comes to this so please explain in simple terms.
So I will explain as briefly as possible:
- I have Windows 10 x64
- Bought LG G3 last week, it had Android 4.4.2 (and was already rooted)
- It had overheating issues and battery died fast so I tried to update Android via LG PC Suite -> Did NOT work
- I read that having root access blocked it, but that I could update manually
- I installed USB drivers
- I setup ADB and Fastboot
- I tried using LG Flash Tool 2014 and the Android 6.0 KDZ but it did NOT work (always said there was connection error)
- I tried using lgg3rootdotcom's method to reset the phone back to STOCK ROM without root and followed their instructions to the letter (set COM to 41 etc)
- I did everything, but then it keeps coming up with an error on LG Flash Tool (at 6%)
- It repeats "LAF : Bin_User_Mode" three (3) times whereas in the instructional video it only showed ""LAF : Bin_User_Mode" once (1)
- Then "[ERROR] : Partition Change factory Partition (Phone!=tot)"
(I want to share images but I can't because I am a new member with restrictions, I will post images later today)
- I downloaded the .tot and .dll from lgg3rootcom's website
- I tried D855 Europe, Hongkong, and Taiwan .tot but NONE worked
- Now my phone ONLY boots into Download mode :crying:
- I cannot get into Recovery mode or Normal boot...
- I REALLY just want to get it back to stock right now... Please HELP!
Any help will be much appreciated! Thanks in advance!
I used exact instructions from this thread: http://forum.xda-developers.com/showthread.php?t=2772199
But it ERROR appears at 6% with "[ERROR] : Partition Change factory Partition (Phone!=tot)"
Also, please ask any questions if you want to know more so you can help me..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}