Related
Looking for some help. I've looked in many many places but haven't found a cover like the magnetic cover iPad users have. Is there such a cover for the Note 10.1? Looking for the thinnest cover I can find.
Sent from my Nexus 4 using xda app-developers app
The thinnest cover will still be thicker than the iPad because we don't have the magnetic hinge that would allow only the front cover..
The Samsung cover is remarkably thin, but doesn't stay closed.
There are several trifold covers that have a back that then clips onto the corners of the table with a cut out for the pen., several ship from Hong Kong. Some on eBay, some on Amazon.com the stock is constantly changing.
I ended up getting one that is advertised ads unless thin by mistake. It uses an adhesive to stick to the back of the pad. I really DON'T like that. It also makes removing the pen difficult. Plus it doesn't have a slot to charge the tab without opening the cover. I had to cut one.
It has a fold over flap so that it doesn't open accidentally, but the cover is very floppy. I've only been using it a few weeks, but it just doesn't feel that solid.
In the end I'll probably go with a knockoff Samsung if I can find one that stays closed.
Sent from my GT-N8000 using Tapatalk HD
Agree with the above...the thinnest and sexiest is probably the Samsung magnetic book cover. I wasn't fond of it at first, but I've been using it over my i-Blason lately (which is also very nice but is no where near as thin). Lack of magnet to hold cover closed is really not an issue for me. If I am holding it it stays shut.
Sent from my Galaxy Nexus using Tapatalk 2
Guess I'll go for the Samsung cover .. hope it stays closed.
If you're going to buy a magnetic cover you should get the samsung one. Most other ones will probably cause problems with your wacom digitizer if the magnets get too close while you're using it.
I bought the Samsung white cover for £31 on Amazon, it just finishes the look of my tablet, love it. Jim
Samsung white cover with magnets works for me, I think that it can't have a magnetic closer option because it would interfere with the Wacom digitizer.
Sent from my GT-N8013 using Tapatalk HD
mrbkkt1 said:
Samsung white cover with magnets works for me, I think that it can't have a magnetic closer option because it would interfere with the Wacom digitizer.
Sent from my GT-N8013 using Tapatalk HD
Click to expand...
Click to collapse
That may be, but just one more thin flap around the back would solve that. Some of the knock offs have just that.
Sent from my GT-N8000 using Tapatalk HD
deecee52 said:
That may be, but just one more thin flap around the back would solve that. Some of the knock offs have just that.
Sent from my GT-N8000 using Tapatalk HD
Click to expand...
Click to collapse
I actually hate that flap.
Maybe a static cling strip would do well, I should play with it to see.
Sent from my SGH-T889 using Tapatalk 2
mrbkkt1 said:
I actually hate that flap.
Maybe a static cling strip would do well, I should play with it to see.
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
I can understand that. I have one that folds as part of the tri fold stand so much of time I don't know its there.
Static cling would be great. Keep us posted.
Sent from my GT-N8000 using Tapatalk HD
Try looking at the Anymode cases WEBSITE
I have one and I like it a lot, seems to give decent protection and is wafer thin
AGxM said:
Try looking at the Anymode cases WEBSITE
I have one and I like it a lot, seems to give decent protection and is wafer thin
Click to expand...
Click to collapse
Which one you have? They look interesting. Not sure how some of them on their site hold onto the tablet...
Sent from my Nexus 4 using xda app-developers app
I have also ordered one online. The "vip" model. I am expecting it to arrive tomorrow together with the GNote 10.1. I will post pictures with the Note with the case on and off so you can evalutate if this one is ok for you or not
My Note should arrive tomorrow and i'll pretty soon get a cover for it. I really dislike Samsungs build quality, i could scratch the whole back of it in one day i guess .. Like many did with the S3. My Motorola razr i doesn't even show a scratch even if it has been dropped by my girlfriend once and i don't handle it too careful.
I think i'll go with the Samsung Diary cover. I don't want my tablet to be bulky just because the manufacturer can't use proper materials and i'm too afraid of scratching it. But the fact that it won't stay closed is a major drawback, seems like i won't get the allround case i need. I think i'll have a look if i can get the Anymode I-Band case in Germany, at least this one looks good in my opinion.
crazyondigital
I bought one from crazyondigital on amazon. had it for months and am pretty happy. it handles portrait and landscape. on amazon and inexpensive.
AGxM said:
Try looking at the Anymode cases WEBSITE
I have one and I like it a lot, seems to give decent protection and is wafer thin
Click to expand...
Click to collapse
Is it only possible for people in the U.K. to order those cases or am I missing something? I can't order any of the products on the website....
---------- Post added at 03:11 PM ---------- Previous post was at 03:05 PM ----------
rmeulendijk said:
Is it only possible for people in the U.K. to order those cases or am I missing something? I can't order any of the products on the website....
Click to expand...
Click to collapse
Sorry, found it!!
savvacon said:
Looking for some help. I've looked in many many places but haven't found a cover like the magnetic cover iPad users have. Is there such a cover for the Note 10.1? Looking for the thinnest cover I can find.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
The Samsung Book Cover is about the closest to the smart cover. However I have an iPad 3 also and that smart cover is dangerous... It is really slick and if you are not really careful it will detach itself...
Have you tried this case? http://www.amazon.de/Stilgut-Origin...5PZW/ref=sr_1_2?ie=UTF8&qid=1361754356&sr=8-2
deecee52 said:
The thinnest cover will still be thicker than the iPad because we don't have the magnetic hinge that would allow only the front cover..
The Samsung cover is remarkably thin, but doesn't stay closed.
There are several trifold covers that have a back that then clips onto the corners of the table with a cut out for the pen., several ship from Hong Kong. Some on eBay, some on Amazon.com the stock is constantly changing.
I ended up getting one that is advertised ads unless thin by mistake. It uses an adhesive to stick to the back of the pad. I really DON'T like that. It also makes removing the pen difficult. Plus it doesn't have a slot to charge the tab without opening the cover. I had to cut one.
It has a fold over flap so that it doesn't open accidentally, but the cover is very floppy. I've only been using it a few weeks, but it just doesn't feel that solid.
In the end I'll probably go with a knockoff Samsung if I can find one that stays closed.
Sent from my GT-N8000 using Tapatalk HD
Click to expand...
Click to collapse
As in update: I received a very cheap trifold magnetic cover that I ordered off of eBay similar to this. http://item.mobileweb.ebay.com/viewitem?itemId=200899933118&index=6&nav=SEARCH&nid=87359384600
So far it is working fine. It has magnets to keep closed and my pen works fine for drawing.
It has volume, power and charging ports and buttons exposed and you can easily remove your pen. The only thing I wanted exposed was the headphone jack, but a simple hole punch fixed that. Certainly cheap enough.
Now for the warning. The stick on cases are much worse than I expected. They are stuck on pretty much permanently, so switching cases for different activities was not possible. I do that to have a keyboard sometimes. Now the really bad part, the adhesive is strong enough that you can separate the back from the tablet if you are not careful.
I did just that. Nothing breaks, the back of the tablet it's very flexible, but it is a real bear to get back together. Let's just say I know more about the inside off the tab than I would want to this stage in the warranty.
Sent from my GT-N8000 using Tapatalk HD
deecee52 said:
As in update: I received a very cheap trifold magnetic cover that I ordered off of eBay similar to this. http://item.mobileweb.ebay.com/viewitem?itemId=200899933118&index=6&nav=SEARCH&nid=87359384600
So far it is working fine. It has magnets to keep closed and my pen works fine for drawing.
It has volume, peer ands charging exposed ands you can easily remove your own. The only thing I wanted exposed was the headphone jack, but a simple hole punch fixed that. Certainly cheap enough.
Now for the warning. The stick on cases are much worse than I expected. They are stuck on pretty much permanently, so switching cases for different activities was not possible. I do that to have a keyboard sometimes. Now the really bad part, the adhesive is strong enough that you can separate the back from the tablet off you are not careful.
I did just that. Nothing breaks, the back of the tablet it's very flexible, but it is a real bear to get back together. Let's just say I know more about the inside off the tab than I would want to this stage in the warranty.
Sent from my GT-N8000 using Tapatalk HD
Click to expand...
Click to collapse
Can you post some pics with the case
Any ideas about a magnetic case, because i want to use the iMagnet car mount (amazon.com/Cradle-less-Quick-snap-Technology-Smartphone-Windshield/dp/B008IOQ3K6). Not able to post links.
Nicest option would be a (partly) magnetic case which i can just mount to the magnetic car holder. I know it comes with metal plates but how to attach them to the curved back of the One?
We can also discuss any selfmade approache here
i use the imagnet mount and i placed the metal piece between the phone and case with no problems. holds up great on the mount.
i use a bear motion case, fyi
http://www.amazon.com/dp/B00BVWJ9DU/
Sounds great! Doesn't the metal scratch the surface of the one or can I put something between the case+metal plate and the phone?
sorry for the late reply. it doesnt scratch it at all. no issues
ayman86 said:
sorry for the late reply. it doesnt scratch it at all. no issues
Click to expand...
Click to collapse
Great idea, but is the case still nicely fit the phone? I can imagine that it won't clip correctly anymore because of the added thickness. If i look at my case (just a standard backover from ebay) it doesn't seem to have any room for a magnet plate. Do you have pictures maybe?
This is also (maybe more elegant) solution: click!
well yeah, the case fits fine as i use it. lol. no problems.
http://www.amazon.co.uk/gp/product/B00GPKONYI/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
Received this case on the first day of the long predicted window for delivery. Although it's marketed as ELTD, the clasp is labelled IVSO. I'm very pleased with the quality of the materials, very good fit with the hard shell, all cutouts in exactly the right place and the foldable cover has a quality feel to it, almost too stiff. Auto-wake and sleep works perfectly, and the magnetic clasp is very strong, no danger of it coming open in your bag. It's a bit tricky to find the right position for the more vertical position, turns out you have to attach the magnetic clasp to the top hinge of the case which keeps the case from lying flat over the speakers. It also needs to be on a flat surface. Can't fault the supplier either, very fast and satisfactory responses to my queries. All in all, highly recommended.
shadowgolf said:
http://www.amazon.co.uk/gp/product/B00GPKONYI/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
Received this case on the first day of the long predicted window for delivery. Although it's marketed as ELTD, the clasp is labelled IVSO. I'm very pleased with the quality of the materials, very good fit with the hard shell, all cutouts in exactly the right place and the foldable cover has a quality feel to it, almost too stiff. Auto-wake and sleep works perfectly, and the magnetic clasp is very strong, no danger of it coming open in your bag. It's a bit tricky to find the right position for the more vertical position, turns out you have to attach the magnetic clasp to the top hinge of the case which keeps the case from lying flat over the speakers. It also needs to be on a flat surface. Can't fault the supplier either, very fast and satisfactory responses to my queries. All in all, highly recommended.
Click to expand...
Click to collapse
So, the speakers are covered by the case when it's standing, aren't they? Could you post some pictures please?
Thanks in advanced.
shadowgolf said:
http://www.amazon.co.uk/gp/product/B00GPKONYI/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
Received this case on the first day of the long predicted window for delivery. Although it's marketed as ELTD, the clasp is labelled IVSO. I'm very pleased with the quality of the materials, very good fit with the hard shell, all cutouts in exactly the right place and the foldable cover has a quality feel to it, almost too stiff. Auto-wake and sleep works perfectly, and the magnetic clasp is very strong, no danger of it coming open in your bag. It's a bit tricky to find the right position for the more vertical position, turns out you have to attach the magnetic clasp to the top hinge of the case which keeps the case from lying flat over the speakers. It also needs to be on a flat surface. Can't fault the supplier either, very fast and satisfactory responses to my queries. All in all, highly recommended.
Click to expand...
Click to collapse
got it as well this morning I found the case a wee bit heavy seem to be more than the ELTD slimbook that I allready have
I am not happy with it as I was with the slimbook , I found the build quality better
---------- Post added at 02:40 PM ---------- Previous post was at 02:37 PM ----------
altusan said:
So, the speakers are covered by the case when it's standing, aren't they? Could you post some pictures please?
Thanks in advanced.
Click to expand...
Click to collapse
not really you got a little gap
I think that you can see it on the 4th picture
pict : https://drive.google.com/folderview?id=0BxZP-RYOkdYMVmVxcGctZ1hYeW8&usp=sharing
I bought the IVSO version, but it looks like they could be the same case. Mine was delivered today too so hopefully I will be pleased with it too.
Edited to add, I'm very pleased with the IVSO case.
Build quality is great, though the case is quite weighty. The magnets are very good, there's no way the cover will accidentally open.
Sent from my HTC Desire C using XDA Premium 4 mobile app
l'irlandais said:
got it as well this morning I found the case a wee bit heavy seem to be more than the ELTD slimbook that I allready have
I am not happy with it as I was with the slimbook , I found the build quality better
---------- Post added at 02:40 PM ---------- Previous post was at 02:37 PM ----------
not really you got a little gap
I think that you can see it on the 4th picture
pict : https://drive.google.com/folderview?id=0BxZP-RYOkdYMVmVxcGctZ1hYeW8&usp=sharing
Click to expand...
Click to collapse
I really don't like the look of the slimbook with the case covering the bezel. This case is much nicer to look at for me.
shadowgolf said:
I really don't like the look of the slimbook with the case covering the bezel. This case is much nicer to look at for me.
Click to expand...
Click to collapse
And your cover in the photo is the ELTD sold by Amazon, isn't it? I like that one much.
altusan said:
And your cover in the photo is the ELTD sold by Amazon, isn't it? I like that one much.
Click to expand...
Click to collapse
Yes it's sold as ELTD but the magnetic catch is labelled IVSO.
Excellent - finally, confirmation that this thing does NOT seriously block the speakers in stand mode. Also, that the more vertical stand mode actually works.
I'm gonna wait a few weeks to see if a red version will pop up - but this is a buy for me. Thanks guys for the pictures!
Mark
Is this available in the US yet or just the UK?
Sent from my LG-V500 using xda app-developers app
I heard about magnets messing up the screens of some tablets, I assume this isn't an issue with this tablet
JimMutth said:
Is this available in the US yet or just the UK?
Sent from my LG-V500 using xda app-developers app
Click to expand...
Click to collapse
This is the one available in US via Amazon
http://www.amazon.com/Smart-Cover-Edition-Tablet-Function/dp/B00GSK46D8/ref=sr_1_2?ie=UTF8&qid=1387323787&sr=8-2&keywords=lg+g+pad+8.3
Supposedly it is in stock and can get it in 2 days via Prime. However, I pre-ordered and yet to receive mine so don't know how accurate that is.
cbb77 said:
This is the one available in US via Amazon
http://www.amazon.com/Smart-Cover-E...8&qid=1387323787&sr=8-2&keywords=lg+g+pad+8.3
Supposedly it is in stock and can get it in 2 days via Prime. However, I pre-ordered and yet to receive mine so don't know how accurate that is.
Click to expand...
Click to collapse
Thanks. I just ordered it with 2 day shipping. We shall see.
Jim
Sent from my LG-V500 using xda app-developers app
JimMutth said:
Is this available in the US yet or just the UK?
Sent from my LG-V500 using xda app-developers app
Click to expand...
Click to collapse
This is the one I bought here in the US:
http://www.amazon.com/dp/B00GSK46D8/ref=cm_sw_r_an_am_at_ws_us?ie=UTF8
Sent from my LG-V500 using Tapatalk 4
Does the magnet turn off the screen when you fold the cover all the way to the back?
It is available @Amazon.de (Germany) as well.
Just bought it, should receive it tomorrow.
Geordie_Ahmed said:
I heard about magnets messing up the screens of some tablets, I assume this isn't an issue with this tablet
Click to expand...
Click to collapse
I haven't noticed any screen issues since I got the case.
Tqpolo said:
Does the magnet turn off the screen when you fold the cover all the way to the back?
Click to expand...
Click to collapse
No.
shadowgolf said:
No.
Click to expand...
Click to collapse
A review on Amazon says it did.
My ivso turned up today, mixed feelings so far.
The case certainly feels strong enough, good fit, but the metal magnetic tag is a little too big for me, it is very close to the screen when closed.
The auto sleep/wake function mode does not work correctly for me, only works when the front cover is folded round the back, no idea why??? But then the function does not work when the pin lock is in use so it is not a deal breaker for me.
The horizontal stand is also a bit hit and miss, often comes loose but i expect the fabric grooves to soften over time and i expect it will work fine.
Speakers are covered with stand horizontal but i did not bother me. Still loud enough.
If anybody wants pics let me know.
Tqpolo said:
A review on Amazon says it did.
Click to expand...
Click to collapse
Well I can assure you that mine doesn't.
Recently, I've been getting annoyed with using my Kenu Airframe/Samsung Car Mount having to keep slipping on and off buttons or pushing my mount aside to slip in my phone.
So, I've been reading about the magnetic feature in order to activate the Car Mode/Desktop Mode on our Moto X. So I attempted to build a Magnetic Car Mount this weekend.
I realized that the Moto X itself had a metal band that would activate the Car Mode, however it wasn't strong enough to hold with my Magnet, so I had to place metal plate into a case and put the phone in, which that worked flawlessly. However, the metal plate bulged everywhere so the phone wasn't nice to hold anymore.
Luckily, my dad is a welder, and I worked on molding the metal plate with him, and decided I disliked my Diztronic Frost Case (On the side note, I liked the Matte Black Best). So, I decided to cut a piece out of my Diztronic case that fit with my metal plate. So now the plate curved with the case!
I inserted the metal plate into the cut out, glued it in place, and my roughly build case with a metal plate works like a charm with my Magnetic Mount setup with my Kenu Airframe. I gotta say it's one of the nicest things not to have to fiddle with anything and just take your phone off with a quick snap. This all cost me about $5 + $25 (Which is the Airframe). I'm ordering a new case and Mountek Metal Plating to reduce the thickness hoping that I won't have to cut an insert, but we'll see in the following days. I'll update it when I receive the plates.
I went autocrossing with my car, phone mounted my magnetic mount and at speeds and curves of 60-70 MPH, this thing stuck like glue!
Very pleased overall. Hopefully some of you guys will steer clear from the Griffin Dock for our phones and custom build your own mount
Can you post a pic of it in action?
Sent from my XT1080 using Tapatalk
1454 said:
Can you post a pic of it in action?
Sent from my XT1080 using Tapatalk
Click to expand...
Click to collapse
Here a few, sorry they are definitely blurry. Fairly tired for the night, tried to get a quick snaps in for an idea. Can't wait when I get my kit together to make everything look professional.
The Kenu can turn 360 degrees to fit whatever direction you'd like the magnet/a device to face. It's held on your air vent.
https://www.dropbox.com/sh/tmb0izdpeylz41u/cMXKcCgPcO
Kenichi said:
Here a few, sorry they are definitely blurry. Fairly tired for the night, tried to get a quick snaps in for an idea. Can't wait when I get my kit together to make everything look professional.
The Kenu can turn 360 degrees to fit whatever direction you'd like the magnet/a device to face. It's held on your air vent.
https://www.dropbox.com/sh/tmb0izdpeylz41u/cMXKcCgPcO
Click to expand...
Click to collapse
One more question. Any adverse effects from the magnet on the builtin compass or Navi? I've seen other places were people had issues with the magnet setups on those functions. Just wanted to see your thoughts.
Sent from my XT1080 using Tapatalk
1454 said:
One more question. Any adverse effects from the magnet on the builtin compass or Navi? I've seen other places were people had issues with the magnet setups on those functions. Just wanted to see your thoughts.
Sent from my XT1080 using Tapatalk
Click to expand...
Click to collapse
I use a digital speedometer/Navigation day to day, haven't had any negative affects that I've seen yet. Speedometer/GPS Speed is right on my Digital Odometer's value, so I can't say I have any issues yet. Let me know if you have any other questions! :laugh: Plus the location of my metal plate in the pictures taken, I am still able to do NFC!
Just got my parts in today for thinner pieces of metal, integrated it into a few of my cases. Plus, I made a new magnet. Quite fun!
Kenichi said:
I use a digital speedometer/Navigation day to day, haven't had any negative affects that I've seen yet. Speedometer/GPS Speed is right on my Digital Odometer's value, so I can't say I have any issues yet. Let me know if you have any other questions! :laugh: Plus the location of my metal plate in the pictures taken, I am still able to do NFC!
Just got my parts in today for thinner pieces of metal, integrated it into a few of my cases. Plus, I made a new magnet. Quite fun!
Click to expand...
Click to collapse
Thanks for all the answers and sharing. The community is great because of people like you.
Sent from my XT1080 using Tapatalk
1454 said:
Thanks for all the answers and sharing. The community is great because of people like you.
Sent from my XT1080 using Tapatalk
Click to expand...
Click to collapse
I have been using magnetic mounts since my OG Droid. It is nice to see Moto reverted back to magnetic activation of dock mode instead of their smartdocks. I have noticed Moto has switched the polarity of the magnet's activation of car/desk dock modes from the OG Droid. I have an RND dock at home that I glued a magnet to. It automatically activates Daydream when docked. My next project is modifying the RND dock to include HDMI out and USB OTG capability.
I was wondering if anyone had thoughts or has even tried these types of car mounts.
http://www.ebay.com/itm/Nexcon-Magn...lde-/221655676812?hash=item339bb5378c&vxp=mtr
Its magnetic so I was wondering if people thought our Nexus 5 would work with it without the metal plate they supply. Seeing as the Nexus 5 has magnets in it's back I would think the only question is if the magnets used are attracted to the ones in the Nexus 5 and the placement of the magnets. I may get one to try out but I wanted to see people's thoughts anyway.
Well as far as I am informed and seen, inside your nexus 5 are metal discs not magnets, the magnets comes in the original nexus 5 wireless charger. Hope this make it more clear, and I think they made it a bit vague so you would get it then they would simply tells you to get their magmatic cover !!!
ahmad shishani said:
Well as far as I am informed and seen, inside your nexus 5 are metal discs not magnets, the magnets comes in the original nexus 5 wireless charger. Hope this make it more clear, and I think they made it a bit vague so you would get it then they would simply tells you to get their magmatic cover !!!
Click to expand...
Click to collapse
I wasn't sure if inside the Nexus 5 are magnets or, as you say, metal disks. I know my old Palm Pre had magnets in the back of the phone for it's TouchStone charger. I actually have two of those. And the Nexus 5 actually connects with that really well. Almost like it was made for it. If these docks are similar to what the TouchStone charger is as far as magnet placement, it should work really well without that metal plate they give you. But the plate does come with it to use with a phone case just in case. So I may just put down the 10 bucks or so and see how it goes.
Cool let me know what turns out, I may kick one too off ebay
I have this one in my car http://www.amazon.com/InfiniApps-Smartphones-Cradle-less-Quick-snap-technology/dp/B00DPMNNUO/ref=sr_1_38?ie=UTF8&qid=1427845784&sr=8-38&keywords=magnetic+car+mount
It works very well, and the phone stays locked in place. It attaches to the 4 metal plates in the back cover of the Nexus 5 meant for the official Qi charger. You can't use a case though, or the magnets won't be strong enough to hold. If you do use a case (thin TPU or thin hard case only) then you will need the metal plate insert for it to work. But even still, the phone sticks way better without a case. It sticks best in vertical position, if you do landscape it needs to be centered perfectly or it will start to twist back to vertical over big bumps, it won't come off, but it will turn.
I use an nGroove Snap (http://www.amazon.com/Mountek-nGroove-Magnetic-Smartphones-Tablets/dp/B00HMDYH2U) and it works just fine even without the metal plate.
DosNexus said:
I have this one in my car http://www.amazon.com/InfiniApps-Smartphones-Cradle-less-Quick-snap-technology/dp/B00DPMNNUO/ref=sr_1_38?ie=UTF8&qid=1427845784&sr=8-38&keywords=magnetic+car+mount
It works very well, and the phone stays locked in place. It attaches to the 4 metal plates in the back cover of the Nexus 5 meant for the official Qi charger. You can't use a case though, or the magnets won't be strong enough to hold. If you do use a case (thin TPU or thin hard case only) then you will need the metal plate insert for it to work. But even still, the phone sticks way better without a case. It sticks best in vertical position, if you do landscape it needs to be centered perfectly or it will start to twist back to vertical over big bumps, it won't come off, but it will turn.
Click to expand...
Click to collapse
rpr69 said:
I use an nGroove Snap (http://www.amazon.com/Mountek-nGroove-Magnetic-Smartphones-Tablets/dp/B00HMDYH2U) and it works just fine even without the metal plate.
Click to expand...
Click to collapse
Good to know that these do in fact work without those metal plates. I thought they'd might but thanks for confirming it. I don't use a case so it should be perfect for me. I'll definitely be getting one now.
Made my own car charger. Too bad my Spigen case is too thick, so can't use it. Or I just have to risk breaking my phone by not using the case..... Dilemma...
I use kenu airframe + google Nexus qi charger = perfect solution.
I ended up buying this one and it works perfectly.
http://www.ebay.com/itm/381075023900?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT
Do you need to use the included magnetic stickers? Or will it lock to the magnets inside the phone?
JaymzTA said:
Do you need to use the included magnetic stickers? Or will it lock to the magnets inside the phone?
Click to expand...
Click to collapse
Nope. It works as is. And it works nicely too. If the next Nexus doesn't have magnets, I'm going to be sad.
I have another mount, I believe it's called "iMagnet" which is almost identical. After using it for the past year with my nexus 5, I have some gripes about it. It's not an incredibly solid grip, which means every bump is going to make your phone start rotating one way or the other. I like to place my phone in landscape mode but since it's in landscape mode, the phone will twist on the mount until it's touching the dash. I'll periodically move the phone back to the center of the mount while I'm driving which probably isn't safe. Ive used my phone with cases, without cases, with dbrand skins, without. The official Google "bumper" and my spigen neo hybrid are both too thick for the mount to have a good hold, so it really slides all over the place. Using a skin, doesn't affect it too much though. If I were to get another car mount I wouldn't get one of these. It's not horrible, but it just gets annoying.
Sent from my Nexus 5 using XDA Free mobile app
jsgraphicart said:
Nope. It works as is. And it works nicely too. If the next Nexus doesn't have magnets, I'm going to be sad.
Click to expand...
Click to collapse
On your recommendation I just ordered one from amazon
JaymzTA said:
On your recommendation I just ordered one from amazon
Click to expand...
Click to collapse
I think you'll be happy with it
I have one, and I love it. I've got one of the slim Spigen cases and I put one of the metal plates between the phone and the case. I had to play with the position to make sure I could still use NFC, Qi charging, and GPS worked fine.
Now I feel super confident in my purchase. Thanks guys!
I've been happy with this one from amazon http://www.amazon.com/gp/product/B00V54LQO4?psc=1&redirect=true&ref_=oh_aui_detailpage_o04_s00 only $10.99.
jsgraphicart said:
I think you'll be happy with it
Click to expand...
Click to collapse
I just received it in the mail, and the build quality seems pretty good. I just had neck surgery the other day, so I won't be able to use it for at least a few weeks. I can't wait to try it out!