Related
Hello great community. I have a yakju version of Galaxy Nexus and my case goes like this :
First
Unlocked
Unrooted
Running ICS 4.0.4 ( build IMM76I , XXLA2 radio ) stock
Meanwhile
Installing Nexus Root Toolkit v1.5
BackUp Files, Contacts, SMS etc
Unlock and Root
BackUp with ROM Manager ClockworkMod
Install stock ICS 4.1.1 Jelly Bean ( f946a4120eb1.signed-yakju-JRO03C-from-IMM76I.f946a412.zip )
Then
Running ICS 4.1.1 but with these problems :
1. When i go to set a ringtone it open my file browser (ES File Explorer) to select a file (!) and not the common ringtone list. Like there's no ringtones in phone.
2. I restored contacts successfully but there aren't sorted in groups as i had it. (Friends, Family etc)
3. I cannot delete some folders and files in my sdcard (like my rom backup - i have stored this in my pc btw)
4. I cannot root again using SuperSU (failed)
Any help about any of above would appreciate it. Thank you
ps It's my first time i'm doing all these stuff
jzerocs said:
Hello great community. I have a yakju version of Galaxy Nexus and my case goes like this :
First
Unlocked
Unrooted
Running ICS 4.0.4 ( build IMM76I , XXLA2 radio ) stock
Meanwhile
Installing Nexus Root Toolkit v1.5
BackUp Files, Contacts, SMS etc
Unlock and Root
BackUp with ROM Manager ClockworkMod
Install stock ICS 4.1.1 Jelly Bean ( f946a4120eb1.signed-yakju-JRO03C-from-IMM76I.f946a412.zip )
Then
Running ICS 4.1.1 but with these problems :
1. When i go to set a ringtone it open my file browser (ES File Explorer) to select a file (!) and not the common ringtone list. Like there's no ringtones in phone.
2. I restored contacts successfully but there aren't sorted in groups as i had it. (Friends, Family etc)
3. I cannot delete some folders and files in my sdcard (like my rom backup - i have stored this in my pc btw)
4. I cannot root again using SuperSU (failed)
Any help about any of above would appreciate it. Thank you
ps It's my first time i'm doing all these stuff
Click to expand...
Click to collapse
1. The ES File Explorer is set as the default application that is opened when you want to select a ringtone.
Go to Settings, Apps, ES File Explorer, then press clear defaults. It should now ask you which application you want to use to select a ringtone.
2. You will have to do this again manually, unless you have your contacts on google or another service.
3. I'm not sure about this. Try deleting them by connecting to a PC.
4. You need to use a new version of SuperSU, I've attached it in this post.
Enjoy Jelly Bean!
kslotay said:
1. The ES File Explorer is set as the default application that is opened when you want to select a ringtone.
Go to Settings, Apps, ES File Explorer, then press clear defaults. It should now ask you which application you want to use to select a ringtone.
2. You will have to do this again manually, unless you have your contacts on google or another service.
3. I'm not sure about this. Try deleting them by connecting to a PC.
4. You need to use a new version of SuperSU, I've attached it in this post.
Enjoy Jelly Bean!
Click to expand...
Click to collapse
Thank you very much! I have another question about the attached app. It's a zip file which contains META Information and binaries in a System folder. So i have to place the binaries at the right place in my phone (obviously at /system/xbin , /system/app ) right? And the META folder goes where?
jzerocs said:
Thank you very much! I have another question about the attached app. It's a zip file which contains META Information and binaries in a System folder. So i have to place the binaries at the right place in my phone (obviously at /system/xbin , /system/app ) right? And the META folder goes where?
Click to expand...
Click to collapse
No do not extract the Zip file!
If you have ClockWordMod installed simply boot into it and use install zip file command from it, and locate the zipped file (on your phone memory).
If you do not have CWM, use fastboot to boot into CWM (you can find that information on some other threads), and install the zip file from there.
Follow these steps: (except with the above zip file)
http://forum.xda-developers.com/showpost.php?p=26328017&postcount=123
You have to copy over the zip file to your phone first, then boot into CWM, and install the zip file.
kslotay said:
No do not extract the Zip file!
If you have ClockWordMod installed simply boot into it and use install zip file command from it, and locate the zipped file (on your phone memory).
If you do not have CWM, use fastboot to boot into CWM (you can find that information on some other threads), and install the zip file from there.
Follow these steps: (except with the above zip file)
http://forum.xda-developers.com/showpost.php?p=26328017&postcount=123
You have to copy over the zip file to your phone first, then boot into CWM, and install the zip file.
Click to expand...
Click to collapse
All Good! But i noticed another "problem" now.. in my Gallery i have a folder named "imageDownloader" who contains 700+ photos. I delete them all and after reboot it exists again. What is that anyway?
update: The images belongs to a folder named "07-11-2012_21-01" , it seems to be cached data of the app "Thumb". This folder is created by the backup, is located in sdcard and i can't delete it, even through my pc.. i don't know why :/
Unable to connect to Wireless N-only or 5GGz networks after update
I've been unable to connect to my home network on either band in the 'N' mode since updating to Jelly Bean. I have no problems seeing both networks and it says they're "saved", but when I click connect, it doesn't proceed to "authenticating" or obtaining an IP address.
I've tried several Custom ROMs with the same result, and I've never had this problem with any ICS versions and can regain connectivity by rolling back the update.
I've tried low-level troubleshooting (no network encryption, MAC reservation, multiple reboots, etc.) with no luck. I'm currently forced in a mixed N/G mode on 2.4 GHz to use my Wi-Fi.
There have been occasional reports of this over the last year or so on various platforms, but I'm wondering if there's any software/files, etc. that can be tweaked or looked at to see where this issue is manifested.
I cannot delete some files located in my /sdcard. I tried through "Root Browser" , through my PC... nothing worked :/ Any help please?
jzerocs said:
Hello great community. I have a yakju version of Galaxy Nexus and my case goes like this :
First
Unlocked
Unrooted
Running ICS 4.0.4 ( build IMM76I , XXLA2 radio ) stock
Meanwhile
Installing Nexus Root Toolkit v1.5
BackUp Files, Contacts, SMS etc
Unlock and Root
BackUp with ROM Manager ClockworkMod
Install stock ICS 4.1.1 Jelly Bean ( f946a4120eb1.signed-yakju-JRO03C-from-IMM76I.f946a412.zip )
Then
Running ICS 4.1.1 but with these problems :
1. When i go to set a ringtone it open my file browser (ES File Explorer) to select a file (!) and not the common ringtone list. Like there's no ringtones in phone.
2. I restored contacts successfully but there aren't sorted in groups as i had it. (Friends, Family etc)
3. I cannot delete some folders and files in my sdcard (like my rom backup - i have stored this in my pc btw)
4. I cannot root again using SuperSU (failed)
Any help about any of above would appreciate it. Thank you
ps It's my first time i'm doing all these stuff
Click to expand...
Click to collapse
SD card ??
I'm having the same problem of being unable to delete some files off the internal sdcard. Anyone figure out a solution yet?
Sent from my Galaxy Nexus using Tapatalk 2
Hi! friends do you know?you are able to hide a folder from anyone without using any softs or apps.It can possible with your android's file manager;which are almost inbuilted in your phone.Just follw the easy steps to hide a folder with it's contains.
»»INSTRUCTION:
First open your phone's file manager,then choose the folder you want to hide.Next just RENAME the target folder you want to hide,just give a 'dot'(.) on before the name of the folder,and see the magic...BRAVO!!! folder was hidden successfully.To view the hidden folder,just go to the settings of your file manager and select "SHOW HIDDEN FOLDERS/ITEMS",then the folder appears;to hide it again just unselect "SHOW HIDDEN FOLDERS/ITEMS",the folder will be hides again.
If you have a bit problem with understanding the method,just see the example bellow-
»EXAMPLE:
Here "PROJECT" is a target folder which i want to hide.Just rename this folder from "PROJECT" to ".PROJECT".The folder will automatically hides.
»NOTES::
If your folder does not hiddening,then please check your file manager settings options to view hidden items.If this option is at 'on' mode so please 'off' the option to hide your folder.Then it works fine.
SENT FROM MY SAMSUNG GALAXY Y DUOS GT-S6102 VIA XDA APP
I think it is basic knowledge.
But when you will open the sd card the hidden files will be shown automatically.
It is applicable only in android device.
By the way thanks for the share.
Thanks for ur comment.But I have tried this procedure with my android divice,and by opening/removing the sd card...the files are not shows again...and also i have inserted the sd card with hidden files in my java phone..but the hidden files are not shown on the java phone also...
Sent from my GT-S6102 using xda app-developers app
good work but i think everyone knows this trick
vijeth said:
good work but i think everyone knows this trick
Click to expand...
Click to collapse
Thanks bro,I know that everyone knows this trick...But I posted this in this section just bcoz I think here is no posts like that....
Sent from my GT-S6102 using Xparent BlueTapatalk 2
go your sd select your folder /vido/img anything and slect rename option.. then slect (.) (stop) symbol in your folder name ex-.callrecoder
save it.. it will hide
Sent from my GT-S5360 using xda app-developers app
nirupom said:
go your sd select your folder /vido/img anything and slect rename option.. then slect (.) (stop) symbol in your folder name ex-.callrecoder
save it.. it will hide
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Buddy I have told this in this guide....this is a guide thread,not a [email protected] thread...
:thumbup: DON'T FORGET TO PRESS THANKS BUTTON IF I HAVE A BIT SUCCESS TO HELP YOU :thumbup:
That, or you can nerd up!!
TECHNO_THUNDER said:
Hi! friends do you know?you are able to hide a folder from anyone without using any softs or apps.It can possible with your android's file manager;which are almost inbuilted in your phone.Just follw the easy steps to hide a folder with it's contains.
»»INSTRUCTION:
First open your phone's file manager,then choose the folder you want to hide.Next just RENAME the target folder you want to hide,just give a 'dot'(.) on before the name of the folder,and see the magic...BRAVO!!! folder was hidden successfully.To view the hidden folder,just go to the settings of your file manager and select "SHOW HIDDEN FOLDERS/ITEMS",then the folder appears;to hide it again just unselect "SHOW HIDDEN FOLDERS/ITEMS",the folder will be hides again.
If you have a bit problem with understanding the method,just see the example bellow-
»EXAMPLE:
Here "PROJECT" is a target folder which i want to hide.Just rename this folder from "PROJECT" to ".PROJECT".The folder will automatically hides.
»NOTES::
If your folder does not hiddening,then please check your file manager settings options to view hidden items.If this option is at 'on' mode so please 'off' the option to hide your folder.Then it works fine.
SENT FROM MY SAMSUNG GALAXY Y DUOS GT-S6102 VIA XDA APP
Click to expand...
Click to collapse
Nice idea. I don't mean to be a spoil-sport, or a smart-ass.... But here goes...
Either that, or you can wear your geek glasses and do the following (root required).
1. Get Root Explorer or a similar app.
2. Browse to /data or /system or the root / or any other folder you like. But make sure you have got some free space left.
3. Mount R/W
4. Create a folder in any name you like. Let's say rktcool.
5. Put your contents in there.
6. ta da! You are done.
Now, your data is relatively more secure
If you want further security, backup Root Explorer using appSaver, or something similar, and then uninstall it. Now, the stock file managers can only browse your sdcard, and you have to install it (Root Explorer) again to be able to view your hidden files...
Pardon me OP, but I just happened to think about this one. Sorry for messing up your thread
rktcool said:
Nice idea. I don't mean to be a spoil-sport, or a smart-ass.... But here goes...
Either that, or you can wear your geek glasses and do the following (root required).
1. Get Root Explorer or a similar app.
2. Browse to /data or /system or the root / or any other folder you like. But make sure you have got some free space left.
3. Mount R/W
4. Create a folder in any name you like. Let's say rktcool.
5. Put your contents in there.
6. ta da! You are done.
Now, your data is relatively more secure
If you want further security, backup Root Explorer using appSaver, or something similar, and then uninstall it. Now, the stock file managers can only browse your sdcard, and you have to install it (Root Explorer) again to be able to view your hidden files...
Pardon me OP, but I just happened to think about this one. Sorry for messing up your thread
Click to expand...
Click to collapse
Making folder in your firmware root location is not a safe location,cause,files may be deleted during flashing firmware packages.And also using the system space may cause many problem for your phone,cause,those spaces are specified for just system datas.....
:thumbup: DON'T FORGET TO PRESS THANKS BUTTON IF I HAVE A BIT SUCCESS TO HELP YOU :thumbup:
TECHNO_THUNDER said:
Making folder in your firmware root location is not a safe location,cause,files may be deleted during flashing firmware packages.And also using the system space may cause many problem for your phone,cause,those spaces are specified for just system datas.....
:thumbup: DON'T FORGET TO PRESS THANKS BUTTON IF I HAVE A BIT SUCCESS TO HELP YOU :thumbup:
Click to expand...
Click to collapse
I think the data being lost during a firmware flash is not much of an issue. It is same as an sdcard - you will always have a backup when you are going to format it.
I meant /system as an example. If that causes any problem, there are always other folders out there like /data where applications you install on your internal memory go. You could keep your files there and install apps on sdcard always.
Better still, you could partition your sdcard, and store your secret files in the second partition, so that they are not even accessible by the normal file managers!
Hi everyone
This is my first thread, so I decide to make it useful to everyone
Let's GO !
What You Want :
ES File Explorer File Manager (OR any file explorer supports zip extracting)
Rooted Phone
Nandroid Backup (You don't know how important it is)
1- enable root explorer and set permission to r/w (read & write)
2- extract the flashable zip to your memory
3- go to the existing folder
4- copy everything except META-INF folder to the root of your phone
5- "Must" show replace confirmation select confirm
6- After the copy operation is finished, reboot your device
7- Done, Congratulations
PLEAS NOTE THAT I AM NOT RESPONSIBLE ABOUT YOUR DEVICE IF YOU BREAK IT RESTORE THE NANDROID BACKUP
note if its a new file you need to set permissions of the file
most files in app are rw-w-w however some may vary depending on what file it is
at the end of the day if you have a flashable zip its much better to flash certain things than push to system so if the flashable zip has already been made for you than you might as well use it
One doubt please
Ahmad YH said:
Hi everyone
This is my first thread, so I decide to make it useful to everyone
Let's GO !
What You Want :
ES File Explorer File Manager (OR any file explorer supports zip extracting)
Rooted Phone
Nandroid Backup (You don't know how important it is)
1- enable root explorer and set permission to r/w (read & write)
2- extract the flashable zip to your memory
3- go to the existing folder
4- copy everything except META-INF folder to the root of your phone
5- "Must" show replace confirmation select confirm
6- After the copy operation is finished, reboot your device
7- Done, Congratulations
PLEAS NOTE THAT I AM NOT RESPONSIBLE ABOUT YOUR DEVICE IF YOU BREAK IT RESTORE THE NANDROID BACKUP
Click to expand...
Click to collapse
I think this method only for apk files. "my doubt is this method is posible to replace frameworks files..?"
krsharjun said:
I think this method only for apk files. "my doubt is this method is posible to replace frameworks files..?"
Click to expand...
Click to collapse
yes just push to system and set permissions - normally rw-r-r
although I dont know why you would want to do this as its always better to flash the file and since you have a flashable zip why not just flash it
Just a confuse
marcussmith2626 said:
yes just push to system and set permissions - normally rw-r-r
although I dont know why you would want to do this as its always better to flash the file and since you have a flashable zip why not just flash it
Click to expand...
Click to collapse
as by my knowlege While replacing framework files means it will stuck the mobile then how can we set permission.. ? please help me.. and yes u said is correct but creating update.zip which need an a computer i am so lazy
krsharjun said:
as by my knowlege While replacing framework files means it will stuck the mobile then how can we set permission.. ? please help me.. and yes u said is correct but creating update.zip which need an a computer i am so lazy
Click to expand...
Click to collapse
with root browser you can set permissions of any file - please search how
it depends what framework files you are replacing - you cant just replace with any old file from a different rom - it wont work
if its been designed for your rom or you are modding your own files then thats fine
and a flashable zip takes two secs - you dont need a pc - and iv posted a template loads of times
here is it again - just add any files you want to flash to framework in the framework folder
if you want files to go to the app folder just create a folder in system in the zip called app and put files there
same for any other folder in system
http://d-h.st/sr9
Hello developers, is it possible, with a 'trick' (your wonderfull knowledge) to get the gyro-sensor to run.
-
I had a P6 and an Genius wrote a backupfile to hide the navbar. Maybe same is possible with the gyro-sensor.:
-
I dont know, if it is allowed to copy this text - if not, please forgive me and delete the post - thx. Quote:
-------------------------------------------------------------------------------------------------------------------------------------------------------
Quote:
Originally Posted by hannanzikrea
So I have seen many people trying to edit the build.prop to get small arrow that makes navigation bar appear/disappear. Many people sometimes brick their phone in trying to do so. Some people don't root their phone to avoid voiding their warranty.
SO here is quick solution for the problem
1.Download the attached zip. and unzip it.
2.You will find a folder HuaweiBackup after unzipping.
3.Now put this folder in your sdcard or internal storage.
4.Open Huawei backup software.
5.Select restore from sd card.
6.U will see an option of restore having only settings.
7.Press it And U will see the small arrow on Navigation bar.
Please Tell If This Method Works. Hope it Helps.
and it worked pefect --- is this on the gx8 possible? -Thanks for answers
Hello,
Here is a quick guide on how to replace the boot animation and system font on oos 10.0 (Android Q).
ROOT is required.
Boot animation:
1. Download the attached zip and extract it.
2. Download a custom boot animation of your choice (XDA Boot animations collection).
3. Rename the downloaded boot animation file to "bootanimation.zip" and copy it to "BootAndFont > system > media > bootanimation.zip".
You can skip now if you don't want custom font.
If you don't want to change Fonts, just delete the "fonts" directory.
4. Download custom fonts of your choice.
5. Rename the fonts to their relatives in the "BootAndFont > system > fonts " directory.
6. After everything is in place, using root explorer (such as ES File Explorer) move both "BootAndFont" and "module.prop" into the device to the following location
"/data/adb/modules/"
(You can see the final result in the attached images.)
7. Go to Magisk, refresh the modules and make sure that the new module is now on the last.
Reboot the device and everything should work!
*Tested on OP7T, Should work on every OOS 10.
*Current Font is Germania-one, you can leave it as-is if you want.
Feel free to ask questions.
yaaria said:
Hello,
Here is a quick guide on how to replace the boot animation and system font on oos 10.0 (Android Q).
ROOT is required.
Boot animation:
1. Download the attached zip and extract it.
2. Download a custom boot animation of your choice (XDA Boot animations collection).
3. Rename the downloaded boot animation file to "bootanimation.zip" and copy it to "BootAndFont > system > media > bootanimation.zip".
You can skip now if you don't want custom font.
If you don't want to change Fonts, just delete the "fonts" directory.
4. Download custom fonts of your choice.
5. Rename the fonts to their relatives in the "BootAndFont > system > fonts " directory.
6. After everything is in place, using root explorer (such as ES File Explorer) move both "BootAndFont.zip" and "module.prop" into the device to the following location
"/data/adb/modules/"
(You can see the final result in the attached images.)
7. Go to Magisk, refresh the modules and make sure that the new module is now on the last.
Reboot the device and everything should work!
*Tested on OP7T, Should work on every OOS 10.
*Current Font is Germania-one, you can leave it as-is if you want.
Feel free to ask questions.
Click to expand...
Click to collapse
Hey
Rename the fonts to their relatives in the "BootAndFont > system > fonts " directory.
6. After everything is in place, using root explorer (such as ES File Explorer) move both "BootAndFont.zip" and "module.prop" into the device to the following location
"/data/adb/modules/"
(You can see the final result in the attached images.)
7. Go to Magisk, refresh the modules and make sure that the new module is now on the last.
Too much confusion on this part like should i archive that bootandfont zip again after placing my font which i am trying to apply (rosemary and cooljazz)
And first i did and it happened how to to apply my custom font your...font is pre-applied after reboot? Can you please provide a video or something
yaaria said:
Hello,
Here is a quick guide on how to replace the boot animation and system font on oos 10.0 (Android Q).
ROOT is required.
Boot animation:
1. Download the attached zip and extract it.
2. Download a custom boot animation of your choice (XDA Boot animations collection).
3. Rename the downloaded boot animation file to "bootanimation.zip" and copy it to "BootAndFont > system > media > bootanimation.zip".
You can skip now if you don't want custom font.
If you don't want to change Fonts, just delete the "fonts" directory.
4. Download custom fonts of your choice.
5. Rename the fonts to their relatives in the "BootAndFont > system > fonts " directory.
6. After everything is in place, using root explorer (such as ES File Explorer) move both "BootAndFont.zip" and "module.prop" into the device to the following location
"/data/adb/modules/"
(You can see the final result in the attached images.)
7. Go to Magisk, refresh the modules and make sure that the new module is now on the last.
Reboot the device and everything should work!
*Tested on OP7T, Should work on every OOS 10.
*Current Font is Germania-one, you can leave it as-is if you want.
Feel free to ask questions.
Click to expand...
Click to collapse
What happens if i have a separate font module? Will that get overwritten even if i delete the font folder?
Can confirm this works! I'm running OP7TP5G (TMobile) running the latest Magisk.
If anyone is unclear of the directions, once you bring the custom boot animation zip in the BootandFont folder, you have to just simply take the BootandFont folder and move it to the location OP mentions. Go into Magisk and confirm, once you are done reboot and you should have the new bootanimation (and or font)
This method is better than the other bootanimation thread on this forum as this does not require you to flash in Magisk nor worry about the permission write error you will get. Much appreciated it hella weird too because I was up all night trying to figure this out and then you come up with this guide ???
infamousvincci said:
What happens if i have a separate font module? Will that get overwritten even if i delete the font folder?
Click to expand...
Click to collapse
If you are removing the "fonts" folder, then it will not overwrite your current font.
Keepinitgreen said:
Can confirm this works! I'm running OP7TP5G (TMobile) running the latest Magisk.
If anyone is unclear of the directions, once you bring the custom boot animation zip in the BootandFont folder, you have to just simply take the BootandFont folder and move it to the location OP mentions. Go into Magisk and confirm, once you are done reboot and you should have the new bootanimation (and or font)
This method is better than the other bootanimation thread on this forum as this does not require you to flash in Magisk nor worry about the permission write error you will get. Much appreciated it hella weird too because I was up all night trying to figure this out and then you come up with this guide ?
Click to expand...
Click to collapse
Glad it was helpful
yaaria said:
If you are removing the "fonts" folder, then it will not overwrite your current font.
Glad it was helpful
Click to expand...
Click to collapse
Nice. Worked fine. Didnt overwrite my font. Nice. Lol. Thanks man!
mytechtb said:
Hey
Rename the fonts to their relatives in the "BootAndFont > system > fonts " directory.
6. After everything is in place, using root explorer (such as ES File Explorer) move both "BootAndFont.zip" and "module.prop" into the device to the following location
"/data/adb/modules/"
(You can see the final result in the attached images.)
7. Go to Magisk, refresh the modules and make sure that the new module is now on the last.
Too much confusion on this part like should i archive that bootandfont zip again after placing my font which i am trying to apply (rosemary and cooljazz)
And first i did and it happened how to to apply my custom font your...font is pre-applied after reboot? Can you please provide a video or something
Click to expand...
Click to collapse
Hi,
You are correct, on part 6, I wrote by mistake to move the bootandfont.zip instead of moving the directory only.
To apply your custom font, first, you need to understand that in different scenarios different fonts are used.
for example when tinted or Bold.
if you have a tinted version of your font should replace it according to the font name.
if you have just 1 version of your font, you can duplicate your font file and rename the copies with every one of the "Roboto" file.
You can see in the attached photo that all of the files are the same. (They are all GermaniaOne that was renamed to what the system is looking for).
I hope it works for you, please contact me if you still have troubles
yaaria said:
Hi,
You are correct, on part 6, I wrote by mistake to move the bootandfont.zip instead of moving the directory only.
To apply your custom font, first, you need to understand that in different scenarios different fonts are used.
for example when tinted or Bold.
if you have a tinted version of your font should replace it according to the font name.
if you have just 1 version of your font, you can duplicate your font file and rename the copies with every one of the "Roboto" file.
You can see in the attached photo that all of the files are the same. (They are all GermaniaOne that was renamed to what the system is looking for).
I hope it works for you, please contact me if you still have troubles
Click to expand...
Click to collapse
Gotcha....Thanks alot bro...
I have a noobie question. Can't you just do the simple: move downloaded boot animation to the system file and replace it with the the stock boot animation and change permissions? A reply would be much appreciated
Youranoos said:
I have a noobie question. Can't you just do the simple: move downloaded boot animation to the system file and replace it with the the stock boot animation and change permissions? A reply would be much appreciated
Click to expand...
Click to collapse
Android 10 system is read only so you need to use magisk to do it systemeless
Hey Yaaria,
Is there any way to replace the lock.ogg and unlock.ogg in root/system/product/media/audio/ui or it could be done using magisk systemless? Please suggest.
adeelsmatrix said:
Hey Yaaria,
Is there any way to replace the lock.ogg and unlock.ogg in root/system/product/media/audio/ui or it could be done using magisk systemless? Please suggest.
Click to expand...
Click to collapse
I've got same question here. When i'll have a free moment i'll try to flash this module with ui sounds.
EDIT: nope. There's something wrong with product mount, it's not working
@yaaria thank you for the guide, I installed animation etc. I downloaded font : roboto.medium.ttf
How select the font? must rename the roboto.medium.ttf, to Germaniaone.ttf ? and delete the ( first) Germaniaone.ttf?
Will this mod (font change attribute) work on stock AOSP ROM?
Nevertheless thanks for contribution.
Edit - Never mind it worked flawlessly.... Thanks for awesome tweak.
OMG Thank You! This is so awesome! I was looking for a way to change both of these and you killed 2 birds with one module. At first it didn't work but I then realized that the BootandFont folder was inside another BootandFont folder somehow, all I did was copy the folder containing the module.prop and system folder to the adb modules folder and deleted the duplicate folder it was in but the fonts didn't work. Then I realized I needed to copy the font I wanted running on My phone 18 times and rename them to all those roboto files, so the system loads the file but gets a different font! I now have the glitchy Cyberpunk 2077 Oni/Samurai mask boot image and the OCR-A font running flawlessly on My OnePlus 7T Pro 5G McLaren. You're awesome!
hey when i try to replace the stock animation it keep saying "the read only file error cannot change" stuff what should i do now ??
Why wont this work on OOS 11?
Faizuu[ICODE][ISPOILER][/ISPOILER][/ICODE]