I am trying to use the ATRIX dock which works great but i am having issues getting the keyboard and mouse on the unit to work. I dont understand it should just be able to be recognized like any other usb mouse and keyboard.. i am under CM7. Is there a special kernel or something...or even a rom that can do this?
Hey All,
I've contacted OUYA support (and have a dialog going with them) about this, but thought I'd throw a line out here as well.
I've got a bluetooth Microsoft Entertainment Keyboard 7000 as well as a USB Logitech K400 keyboard.
Both work pretty well with the OUYA (though I don't use both simultaneously for obvious reasons).
One thing I've noticed, however, is that no matter what order I pair the OUYA controllers and keyboard (or connect the USB keyboard) in, the keyboard ends up being player 1 after a period of time.
Example:
Pair OUYA controller 1
Pair OUYA controller 2
Connect USB keyboard
After a day or so, and possibly a full power cycle of the device, the keyboard ends up being Player 1.
This doesn't pose an issue for the most part (the OUYA controllers display that they are players 2 and 3), but some games specifically rely on the device that is identified as Player 1 to actually be an OUYA controller in the game, and therefore I have to go through a whole rigamarole of unpairing all controllers / keyboards, disconnecting the USB keyboard, and doing a full shutdown of the device, then powering it back on and waiting for the pairing wizard to pop up so I can re-pair my controllers.
The real question here is, has anyone else experienced this, and if so have you found a viable workaround?
I'd prefer that the keyboard (whether USB or bluetooth) doesn't get detected as a controller period, but simply acts as an auxiliary means of input for fields where I need to type something in, move a mouse, etc.
Thanks!
pitcherj
Yes, I have exactly the same issue with a Logitech K400 as well. Very annoying, I haven't found a workaround yet.
I have an Ouya controller, a PS3 controller and the K400 in that order and after a while the K400 takes over controller position 1.
There needs to be some way of locking controller 1, or at least a way to quickly change controller positions from within the interface without needing to repair everything.
I had the exact same problem, after looking around for several days trying to find a way to get my controllers paired to slot 1&2. Installed the Blue Board app from the OUYA market.
I've been installed it on my phone, got to to to pair, and used it a couple of times. After that I noticed that my controllers properly paired to slot 1 & 2, and if I hook up my keyboard it properly goes into a different slot.
Blasted from my Samsung Galaxy SIII (CM10.1 Masta Mix).
Over here it is the same problem.
I use a Rapoo E2700 Keyboard with touchpad. It is connected via a seperate USB wireless-dongle.
[A little o.t. but i want to tell everybody thant the keyboard is working great! The Touchpad is super smooth and (unlike the Ouya Controller Touchpad) realy good to navigate a mouse cursor]
It would be nice if there was a menue where you could assign wich Device takes wich controller-slot. Working without a keypboard is a little annoying to me.
Same for all my keyboards, i think it might be intentional.
Everytime I plug in my keyboard dongle it causes the system to lock up and i have to restart, but if I boot with the keyboard hooked up its player 1. They need to get this fixed
Edit: It seems that removing my hub and pluging straight into the ouya works... but now I've no way to use xbox controllers...
After reading through this thread, I'm beginning to wonder if it has something to do with using keyboards meant for PC. The reason I say this is I have had my Motorola Bluetooth Keyboard made for the Xoom paired since the day i got it and it never took over any controller port, but 1 full power cycle with my Logitech USB keyboard and it took over 1st controller.
Does anyone else have a android BT keyboard they can try?
Xbox wireless dongle as well as a el'cheapo GE USB keyboard do the exact same thing... very very annoying
Sent from my Nexus 10 using Tapatalk HD
JLCollier2005 said:
After reading through this thread, I'm beginning to wonder if it has something to do with using keyboards meant for PC. The reason I say this is I have had my Motorola Bluetooth Keyboard made for the Xoom paired since the day i got it and it never took over any controller port, but 1 full power cycle with my Logitech USB keyboard and it took over 1st controller.
Does anyone else have a android BT keyboard they can try?
Click to expand...
Click to collapse
I think this is tied to USB taking priority over Bluetooth. Every USB HID I plug in ends up becoming player one.
Sent from my MB860 using xda app-developers app
---------- Post added at 01:47 AM ---------- Previous post was at 01:44 AM ----------
Sinderan said:
Everytime I plug in my keyboard dongle it causes the system to lock up and i have to restart, but if I boot with the keyboard hooked up its player 1. They need to get this fixed
Edit: It seems that removing my hub and pluging straight into the ouya works... but now I've no way to use xbox controllers...
Click to expand...
Click to collapse
Are you using a powered USB hub? My non powered USB hub does the same thing.
If a powered hub doesn't do it, it might have something to do with the power draw on that single port.
Sent from my MB860 using xda app-developers app
ja450n said:
I think this is tied to USB taking priority over Bluetooth. Every USB HID I plug in ends up becoming player one.
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
I think its more just because The USB connects on boot, while the bluetooth controllers and keyboards have to be turned on. Since the USB where already there they get the first spot and the rest get whats there when they connect.
ja450n said:
Are you using a powered USB hub? My non powered USB hub does the same thing.
If a powered hub doesn't do it, it might have something to do with the power draw on that single port.
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
Yea I think I need a powered hub. I left one at my moms house I'll probably go pick up today when I remember. (Wow I never thought that hub that came with Rock Band 1 on Xbox would ever be useful again lol)
https://support.ouya.tv/entries/247...A-controller-not-shown-as-Controller-1-or-if-
This is their solution.
Sent from my Transformer TF101 using Tapatalk 2
My N7 is being used as a car headunit. I'm having a usb audio issue with multiple devices. With an OTG y cable, I am running an easycap and a UCA 202 w/an amped mic into the inputs. Everything works fine before the easycap is powered. When I swtich intro reverse, video shows up fine. When I shift out of reverse and the easycap powers off, all audio will only play from the internal speakers and I get "Can't open microphone". I have to either reset or dis/reconnect the otg y cable to fix the problem.
I am able to preserve usb audio out if I use the "easycap viewer" app but I cannot get the mic to work at all with the easycap unpowered after the first connection. Mic and audio work fine up until the easycap is powered on for the first time. Interestingly, the Mic will only work when I am in reverse. I figured this out while parked and testing--not really reasonable to shift into reverse on the highway to make a voice command .
Is there a flashable fix? An app? Any workaround?
Appreciate the help. Thanks.
Rom: Stock (LMY48X)
Kernel: Timurs v3 final (I have reached out to the developer and he said that his kernel does not modify the stock android handling of usb audio since it was built into lollipop)
Hi,
I have a OTG/MHL adapter which has 2 USB ports and 1 HDMI port along with other SD/MMC etc. The phone is displaying fine on TV.
However I have a broken screen/digitizer. This is the reason for creating the thread.
When I connect my wired mouse into any of the USB ports, it displays Mouse connected (connected to HDMI through to TV) but there is no pointer and no movement. RED LED is lit under Mouse to show power is drawn.
I have a LG G3 phone but unfortunately trying to connect to it doesn't work however I have another USB OTG Cable but it's only 1 connection. Micro USB to USB. IF I connect that to my LG phone along with my wired mouse then I see the pointer and I can control my phone. No issues.
My Broken phone android version is 4.4.x
The mouse is a new mouse but one of the cheap one from eBay. Bottom of the Mouse the Rating is 5V --- 100Ma
The OTG Adapter is another cheap one but it's always worked for me without any issues. However MAYBE, just maybe the reason it doesn't work is because the power input or DC is also 5V. Does that mean the mouse is taking all the power?
What I'm trying to achieve -
Enable WIFI so then I can remote control the device etc. I use the Broken phone for KODI.
Can I use any ADB commands to make it work? I don't have it rooted I don't think but I can start the phone in Recovery mode.
Any advice will help,
Thanks
Hey guys I'm thinking about getting the HTC 10 but want to ask if it has the ability to plug in a USB keyboard and/or mouse (when you plug in the mouse a cursor shows up on the phone) with it like you can on the S7 edge (it comes with a USB dongle). I use this for a unique situation at work where it comes in handy.
thanks
itsmattgw said:
Hey guys I'm thinking about getting the HTC 10 but want to ask if it has the ability to plug in a USB keyboard and/or mouse (when you plug in the mouse a cursor shows up on the phone) with it like you can on the S7 edge (it comes with a USB dongle). I use this for a unique situation at work where it comes in handy.
thanks
Click to expand...
Click to collapse
You can use a bluetooth mouse/keyboard combo