As I'm new to Samsung handsets...
Someone tried to play with serial cable and Qualcomm Tools like Memory Debug for instance?
Download Mode not allow USB Diag for Qualcomm... only Samsung Modem is still alive in Download Mode. So Question is. If serial cable, maybe chance to dump something as you can port to UART...
Best Regards
delete.......
I use usb->serial-ttl 3.3V converter with 528K resistor on pins 4-5 for outputing diag message. And you need JIG with 301K resistor for entering to download mode.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=12689198&postcount=181
Thanx for this info, but tooo difficult for me to understand.
Please help to make such cable for research... or maybe their are existing cables to buy?
I need something like this:
http://www.badanation.de/topic.php?t=1616&page=fst_unread&highlight=widerstand
Such Pictures would be nice:
http://h-3.abload.de/img/p1000660eei7.jpg
I need FULL Pinout please for S8500.
Thanx in advance.
Best Regards
You mean cable/plug for enter download mode? You can buy it. For example in Poland I can buy this for 12 zlotys = 3 euro + delivery costs.
I found that, for Galaxy S, but is possible this is the same
forum.xda-developers.com/showthread.php?t=819551
I "need" alternate cable for communication between PC and S8500.
Also FULL Pinout is welcome.
Best Regards
http://forum.xda-developers.com/showthread.php?t=820275
Here seems few infos... maybe also work for S8500.
Best Regards
After I saw successfully log from srg.mstr.
Thank you very much.
http://forum.xda-developers.com/showpost.php?p=13426392&postcount=183
Less then 1 Euro for male Connector:
http://www.conrad.de/ce/de/product/733923/MICRO-USB-STECKER-TYP-B-5POL/SHOP_AREA_40306
So I will buy few Connectors...
Now I will make checklist for other parts and prices. As I have no cables at home to cut...
Best Regards
TX<-->2
RX<-->3
GND<-->5
resistor between 4<-->5
http://forum.xda-developers.com/showpost.php?p=13293404&postcount=174
Will try to make such cable this year... in 2013 really.
Checklist...
http://www.conrad.de/ce/de/product/...Kabelmontage-ohne-Gehaeuse-BKL-Electronic-Inh
.
.
.
Best Regards
Will try to make such cable this year...
Click to expand...
Click to collapse
Uupsi, only 2 months left... but I have found other way for Bootlog...
via JTAG RAM dump... something above 0x40000000...
Looks like this:
http://forum.xda-developers.com/showpost.php?p=47037737&postcount=34
Best Regards
2013 soon over... but Mission UART is not over...
New attempt... for 2014...
It seems now "cheap" USB stuff available... based on PL2303... symbolic Photo attached...
According to this Pic...
http://forum.xda-developers.com/showpost.php?p=13426392&postcount=183
Other idea is to solder direct to RX TX and GND on PCB... instead resistor...
Maybe...
Best Regards
Short tested with 3 wires soldered direct to RX TX and Ground under battery/label...
Hmm... first test failed with WinComm... maybe my settings are wrong, will try other Tool for Logging...
Best Regards
Btw...
Never seen S5250 or S8600 user trying to capture data over UART...
:silly:
Code:
[PAM: ] OneNAND physical base address : 0xb0000000
[PAM: ] OneNAND virtual base address : 0xb0000000
[PAM: ] FSR_PAM_InitNANDController Success!!
[PAM: ] --FSR_PAM_Init
[BM : ] FSR_BML_GetFullPartI() is completed
[BM : ] stPartI.nNumOfPartEntry : 7
[BM : ] 1th PartEntrt(nAttr:0x1002)(nID:0x0)
[BM : ] [1th] pPEntry->n1stVun : 1
[BM : ] [1th] pPEntry->nNumOfUnits : 7
[BM : ] [1th] pPEntry->nLoadAddr : 0x0
+-------------------------------+
| Bootloader Shadowing FINISHED |
+-------------------------------+
Launch Image at 0x42480000
[BOOT_V1.0 (May 28 2010, 21:22:23)]
SelectBootingMode: H/W...0xe.
[BOOT] ARMCLK: 400000 KHz, MSYSHCLK 200000 KHz,MSYSPCLK: 100000 KHz, [BOOT] DSYSHCLK 166750 KHz,DSYSPCLK: 83375 KHz,PSYSHCLK: 133400 KHz, PSYSPCLK: 66700 KHz,SYSCON_A2M: 200000 KHz
+++FIMD_Drv_INITIALIZE
FIMD_Drv_ChangeMode: MDNIE_MODE
Frame Rate:62 SCLK_FIMD:133400 kHz ClkDiv:4
S6E63M0 : LDI_Pentile_Set_Change Pentile_Value =6c
---FIMD_Drv_INITIALIZE
---FIMD_Drv_SetWinOnOff(WIN4:1)
LCD initialize Finished
Flash_Unlock failed
Poweron status - c0
FSA9480 0x03 Register = 0
FSA9480 0x0A Register = 0
FSA9480 0x0B Register = 0
FSA9480 0x07 Register = 1f
Used WinComm as Tool...
Stupid me not realized that TX connect to RX and RX to TX... :cyclops:
Best Regards
Code:
[PAM: ] ++FSR_PAM_Init
[PAM: ] OneNAND physical base address : 0xb0000000
[PAM: ] OneNAND virtual base address : 0xb0000000
[PAM: ] FSR_PAM_InitNANDController Success!!
[PAM: ] --FSR_PAM_Init
bl3_info_block 1 and 2 not found, Load BL3
+-------------------------------+
| Bootloader Shadowing FINISHED |
+-------------------------------+
Launch Image at 0x42080000
[BOOT_V1.0 (Jan 5 2012, 19:08:14)]
SelectBootingMode: H/W...0xe.
[BOOT] ARMCLK: 400000 KHz, MSYSHCLK 200000 KHz,MSYSPCLK: 100000 KHz, [BOOT] DSYSHCLK 166750 KHz,DSYSPCLK: 83375 KHz,PSYSHCLK: 133400 KHz, PSYSPCLK: 66700 KHz,SYSCON_A2M: 200000 KHz
+++FIMD_Drv_INITIALIZE
FIMD_Drv_ChangeMode: MDNIE_MODE
Frame Rate:62 SCLK_FIMD:133400 kHz ClkDiv:4
S6E63M0 : LDI_Pentile_Set_Change Pentile_Value =6c
---FIMD_Drv_INITIALIZE
---FIMD_Drv_SetWinOnOff(WIN4:1)
LCD initialize Finished
Flash_Unlock failed
Poweron status - 0
FSA9480 0x03 Register = 0
FSA9480 0x0A Register = 4
FSA9480 0x0B Register = 0
FSA9480 0x07 Register = 1f
Display_LSI_Boot : disp_Main_Clean
Display_LSI_Boot : disp_Main_Clean_All
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_dimming_backlight
LDI_S6E63M0_Set_Brightness is Return (Level: 1)
Display_LSI_Boot : disp_dimming_backlight
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
+SDHC_Open(Ch0)
univ_SD_MEM_PowerOnDevice() : Power On
univ_SD_MEM_PowerOnDevice(ch0) : MASSMEMORY_EN Power On
[SDHC] MPLL source clock from SYSCON : 667000000Hz
[SDHC] SDHC(ch0) source clock from SYSCON : 47642000Hz
[SDHC] SDHC(ch0) Operating Clock : 372203Hz
[SDHC][MMC]byte mode
SD_MEM_Phy_CMD2(ch0) : CID(127~0) : 0x150100, 0x4d324731, 0x44441655, 0x3c7886d
SD_MEM_Phy_Check_moviNAND_Version(ch0) : PRV - 0x16
MMC_Spec = 4
----------------CSD Version 1.0--------in low level-------------
channel: [0]
One Block Size: [512]Byte
Total card Block Count = [4014080]
Total card Capacity Size = [1960]MB
---------------------------------------------------
SD_HostCtrl_IssueCommand[ch0] not SDclk off, cmd13, SD_CLK_CTRL:0x400f
SD_MEM_Phy_TransferState(ch0) :High: Tx : SD_FeedBackClock_BasicDelay
SD_MEM_Phy_TransferState(ch0) :High: Rx : SD_FeedBackClock_InverterDelay
[SDHC] MPLL source clock from SYSCON : 667000000Hz
[SDHC] SDHC(ch0) source clock from SYSCON : 47642000Hz
[SDHC] SDHC(ch0) Operating Clock : 47642000Hz
SD_HostCtrl_IssueCommand[ch0] not SDclk off, cmd13, SD_CLK_CTRL:0xf
SD_HostCtrl_IssueCommand[ch0] not SDclk off, cmd13, SD_CLK_CTRL:0xf
-SDHC_Open(Ch0)
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
DRV_modem_reset!!!!!!!!!!!!!!!!!
DRV_Send_DBL!!!!!!!!!!!!!!!!!
[DLOAD] Download Completed !!!
DRV_Wait_ModemInit!!!!!!!!!!!!!!!!!
DRV_CopyQSCBootBinary!!!!!!!!!!!!!!!!!
DRV_Send_BootBinaryCopyComplete!!!!!!!!!!!!!!!!!
DRV_Modem_BootingStart retry count = 0.
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Uncompressing Linux... done, booting the kernel.
<6>Initializing cgroup subsys cpu
<5>Linux version 3.0.86-g5b25f8d ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 PREEMPT Tue Nov 5 22:35:53 CET 2013
CPU: ARMv7 Processor [412fc082] revision 2 (ARMv7), cr=10c53c7d
CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: wave
Memory policy: ECC disabled, Data cache writeback
CPU S5PV210/S5PC110 (id 0x43110222)
<7>s5pv210_init_clocks: initializing clocks
<6>S3C24XX Clocks, Copyright 2004 Simtec Electronics
<4>s3c24xx_register_clock: new clock sclk_csis, id -1, dev (null) uses same enable bit as mout_csis, id -1, dev (null)
<4>s3c24xx_register_clock: new clock lcd, id -1, dev (null) uses same enable bit as sclk_fimd, id -1, dev (null)
<4>s3c24xx_register_clock: new clock mfc, id -1, dev (null) uses same enable bit as sclk_mfc, id -1, dev (null)
<4>s3c24xx_register_clock: new clock iis, id 0, dev (null) uses same enable bit as i2s_v50, id 0, dev (null)
<7>s5pv210_setup_clocks: registering clocks
<7>s5pv210_setup_clocks: clkdiv0 = 14131330, clkdiv1 = 00400400
<7>s5pv210_setup_clocks: xtal is 24000000
<6>S5PV210: PLL settings, A=800000000, M=667000000, E=80000000 V=54000000<6>S5PV210: ARMCLK=800000000, HCLKM=200000000, HCLKD=166750000
HCLKP=133400000, PCLKM=100000000, PCLKD=83375000, PCLKP=66700000
<6>sclk_dmc: source is mout_mpll (1), rate is 166750000
<6>sclk_onenand: source is hclk_dsys (1), rate is 83375000
<6>sclk: source is mout_mpll (6), rate is 133400000
<6>sclk: source is mout_mpll (6), rate is 66700000
<6>sclk: source is mout_mpll (6), rate is 66700000
<6>sclk: source is mout_mpll (6), rate is 66700000
<6>sclk_mixer: source is sclk_dac (0), rate is 54000000
<6>sclk_fimc: source is ext_xtal (0), rate is 24000000
<6>sclk_fimc: source is ext_xtal (0), rate is 24000000
<6>sclk_fimc: source is ext_xtal (0), rate is 24000000
<6>sclk_cam: source is xusbxti (1), rate is 24000000
<6>sclk_cam: source is ext_xtal (0), rate is 24000000
<6>sclk_fimd: source is mout_mpll (6), rate is 133400000
<6>sclk_mmc: source is mout_mpll (6), rate is 51307692
<6>sclk_mmc: source is mout_mpll (6), rate is 47642857
<6>sclk_mmc: source is mout_mpll (6), rate is 47642857
<6>sclk_mmc: source is mout_mpll (6), rate is 47642857
<6>sclk_mfc: source is sclk_a2m (0), rate is 200000000
<6>sclk_fimg2d: source is sclk_a2m (0), rate is 200000000
<6>sclk: source is mout_mpll (1), rate is 66700000
<6>sclk_csis: source is ext_xtal (0), rate is 24000000
<6>sclk_spi: source is mout_epll (7), rate is 80000000
<6>sclk_spi: source is mout_epll (7), rate is 80000000
<6>sclk_pwi: source is ext_xtal (0), rate is 24000000
<6>sclk_pwm: source is ext_xtal (0), rate is 24000000
<6>sclk_mdnie: source is mout_mpll (6), rate is 166750000
<6>sclk_mdnie_pwm: source is ext_xtal (0), rate is 24000000
<6>s5p: 11534336 bytes system memory reserved for mfc at 0x24500000, 0-bank base(0x24500000)
<6>s5p: 11534336 bytes system memory reserved for mfc at 0x4f3f4000, 1-bank base(0x4f3f4000)
<6>s5p: 11534336 bytes system memory reserved for fimc0 at 0x4e8f4000, 1-bank base(0x4e8f4000)
<6>s5p: 11534336 bytes system memory reserved for fimc2 at 0x4ddf4000, 1-bank base(0x4ddf4000)
<6>s5p: 4194304 bytes system memory reserved for jpeg at 0x24500000, 0-bank base(0x24500000)
<6>s5p: 7680000 bytes system memory reserved for fimd at 0x4d6a1000, 1-bank base(0x4d6a1000)
<7>On node 0 totalpages: 72621
<7> Normal zone: 1534 pages used for memmap
<7> Normal zone: 0 pages reserved
<7> Normal zone: 71087 pages, LIFO batch:15
<7>pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
<7>pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 71087
<5>Kernel command line: init=/init loglevel=4
<6>PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>Memory: 69MB 214MB 0MB = 283MB total
<5>Memory: 272496k/325052k available, 17988k reserved, 0K highmem
<5>Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xff000000 - 0xffe00000 ( 14 MB)
vmalloc : 0xf0000000 - 0xfc000000 ( 192 MB)
lowmem : 0xc0000000 - 0xeff00000 ( 767 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.init : 0xc0008000 - 0xc0617000 (6204 kB)
.text : 0xc0617000 - 0xc0ce8000 (6980 kB)
.data : 0xc0ce8000 - 0xc0d34880 ( 307 kB)
.bss : 0xc0d348a4 - 0xc0e76ad8 (1289 kB)
<6>SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
<6>Preemptible hierarchical RCU implementation.
<6>NR_IRQS:339
<6>VIC @fc000000: id 0x00041192, vendor 0x41
<6>VIC @fc010000: id 0x00041192, vendor 0x41
<6>VIC @fc020000: id 0x00041192, vendor 0x41
<6>VIC @fc030000: id 0x00041192, vendor 0x41
<6>mult[140737]
<6>max_delta_ns[2937815369]
<6>min_delta_ns[30517]
<6>rate[32768]
<6>HZ[256]
<6>Console: colour dummy device 80x30
<6>console [tty0] enabled
<6>Calibrating delay loop... <c>795.12 BogoMIPS (lpj=1554432)
<6>pid_max: default: 32768 minimum: 301
<6>Mount-cache hash table entries: 512
<6>Initializing cgroup subsys debug
<6>Initializing cgroup subsys cpuacct
<6>Initializing cgroup subsys freezer
<6>CPU: Testing write buffer coherency: ok
<6>hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
<6>print_constraints: dummy:
<6>NET: Registered protocol family 16
<6>ram_console: got buffer at 4ff00400, size fec00
<6>ram_console: uncorrectable error in header
<6>ram_console: no valid data in buffer (sig = 0xfeffdfff)
<6>console [ram-1] enabled
<6>S5PC110 Hardware version : EVT1
<6>HWREV is 0xf
S3C Power Management, Copyright 2004 Simtec Electronics
<6>pmstats at 4ffff000
<3>invalid media device
<3>invalid media device
<6>hw-breakpoint: debug architecture 0x4 unsupported.
<6>S5PV210: Initializing architecture
<6>s3c24xx-pwm s3c24xx-pwm.0: tin at 66700000, tdiv at 66700000, tin=divclk, base 0
<6>s3c24xx-pwm s3c24xx-pwm.1: tin at 66700000, tdiv at 66700000, tin=divclk, base 8
<6>s3c24xx-pwm s3c24xx-pwm.2: tin at 66700000, tdiv at 66700000, tin=divclk, base 12
<6>s3c24xx-pwm s3c24xx-pwm.3: tin at 66700000, tdiv at 66700000, tin=divclk, base 16
<6>print_constraints: pd_audio_supply: 5000 mV normal
<6>print_constraints: pd_cam_supply: 5000 mV normal
<6>print_constraints: pd_tv_supply: 5000 mV normal
<6>print_constraints: pd_lcd_supply: 5000 mV normal
<6>print_constraints: pd_g3d_supply: 5000 mV normal
<6>print_constraints: pd_mfc_supply: 5000 mV normal
<6>bio: create slab <bio-0> at 0
<5>SCSI subsystem initialized
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>i2c-gpio i2c-gpio.4: using pins 247 (SDA) and 246 (SCL)
<6>i2c-gpio i2c-gpio.5: using pins 203 (SDA) and 204 (SCL)
<3>max8998 6-0066: No interrupt base specified, no interrupts
<3>i2:10, buck2_idx:0
<6>print_constraints: VALIVE_1.2V: 1200 mV
<6>print_constraints: VUSB_1.1V: 1100 mV
<6>print_constraints: VADC_3.3V: 3300 mV
<6>print_constraints: VTF_2.8V: 2800 mV
<6>print_constraints: VLCD_1.8V: 1800 mV
<6>print_constraints: VUSB_3.3V: 3300 mV
<6>print_constraints: VCC_2.8V_PDA: 2800 mV
<6>print_constraints: CAM_AF_2.8V: 2800 mV
<6>print_constraints: CAM_SENSOR_1.2V: 1200 mV
<6>print_constraints: CAM_SENSOR_A2.8V: 2800 mV
<6>print_constraints: CAM_ISP_1.8V: 1800 mV
<6>print_constraints: CAM_ISP_HOST_2.8V: 2800 mV
<6>print_constraints: VGA_DVDD_1.8V: 1800 mV
<6>print_constraints: VCC_3.0V_LCD: 2800 <--> 3200 mV at 3200 mV
<6>print_constraints: VDD_ARM: 750 <--> 1500 mV at 1200 mV
<6>print_constraints: VDD_INT: 750 <--> 1500 mV at 1100 mV
<6>print_constraints: VCC_1.8V: 1800 mV
<6>print_constraints: CAM_ISP_CORE_1.2V: 1200 mV
<6>print_constraints: USB_VBUS_AP:
<6>print_constraints: USB_VBUS_CP:
<6>i2c-gpio i2c-gpio.6: using pins 206 (SDA) and 209 (SCL)
<6>i2c-gpio i2c-gpio.7: using pins 201 (SDA) and 202 (SCL)
<6>i2c-gpio i2c-gpio.8: using pins 42 (SDA) and 43 (SCL)
<6>i2c-gpio i2c-gpio.11: using pins 114 (SDA) and 98 (SCL)
<6>i2c-gpio i2c-gpio.12: using pins 199 (SDA) and 200 (SCL)
<6>s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
<6>s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
<6>s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter
<6>Advanced Linux Sound Architecture Driver Version 1.0.24.
<6>Bluetooth: Core ver 2.16
<6>NET: Registered protocol family 31
<6>Bluetooth: HCI device and connection manager initialized
<6>Bluetooth: HCI socket layer initialized
<6>Bluetooth: L2CAP socket layer initialized
<6>Bluetooth: SCO socket layer initialized
<6>Switching to clocksource clock_source_systimer
<6>cfg80211: Calling CRDA to update world regulatory domain
<6>Switched to NOHz mode on CPU #0
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
<6>TCP: Hash tables configured (established 16384 bind 16384)
<6>TCP reno registered
<6>UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>NET: Registered protocol family 1
<6>PMU: registered new PMU device of type 0
<4>clk_get: could not find clock emu_src_ck for dev s5pv210_etb_device+0x0/0x100 (etb)
<6>wake enabled for irq 165
<6>wake disabled for irq 165
<6>S5PV210 ADC driver, (c) 2010 Samsung Electronics
<6>Loaded driver for PL330 DMAC-0 s3c-pl330
<6> DBUFF-64x8bytes Num_Chans-8 Num_Peri-2 Num_Events-32
<6>Loaded driver for PL330 DMAC-1 s3c-pl330
<6> DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
<6>Loaded driver for PL330 DMAC-2 s3c-pl330
<6> DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
<6>ashmem: initialized
<6>ROMFS MTD (C) 2007 Red Hat, Inc.
<7>yaffs: yaffs built Nov 5 2013 22:34:00 Installing.
<6>msgmni has been set to 532
<6>io scheduler noop registered
<6>io scheduler deadline registered
<6>io scheduler row registered (default)
<6>io scheduler cfq registered
<6>io scheduler sio registered
MDNIE INIT ..........
<6>S3C MDNIE Driver, (c) 2010 Samsung Electronics
MDNIE INIT SUCCESS Addr : 0xf003c000
IELCD INIT ..........
<6>S3C IELCD Driver, (c) 2010 Samsung Electronics
IELCD INIT SUCCESS Addr : 0xf0040000
<6>s3cfb s3cfb: [fb2] dma: 0x4db06000, cpu: 0xf0400000, size: 0x002ee000
<6>FIMD src sclk = 166750000
<6>s3cfb s3cfb: pixclock adjusted from 39019 to 41979
<6>[mDNIe] mDNIe_tuning_initialize: addr(0x84), data(0x0)
<6>[mDNIe] mDNIe_tuning_initialize: addr(0x90), data(0x0)
<6>[mDNIe] mDNIe_tuning_initialize: addr(0x94), data(0xfff)
<6>[mDNIe] mDNIe_tuning_initialize: addr(0x98), data(0x5c)
<6>[mDNIe] mDNIe_tuning_initialize: addr(0x9c), data(0x10)
<6>[mDNIe] mDNIe_tuning_initialize: addr(0xac), data(0x0)
<6>[mDNIe] mDNIe_tuning_initialize: addr(0xb4), data(0x3ff)
[mDNIe] mDNIe_Set_Mode: current_mDNIe_UI(6), current_mDNIe_OutDoor_OnOff(0)
<6>s3cfb_late_resume is called
<6>FIMD src sclk = 166750000
<6>s3cfb s3cfb: pixclock adjusted from 41979 to 41979
<6>[mDNIe] mDNIe_tuning_initialize: addr(0x84), data(0x0)
<6>[mDNIe] mDNIe_tuning_initialize: addr(0x90), data(0x0)
<6>[mDNIe] mDNIe_tuning_initialize: addr(0x94), data(0xfff)
<6>[mDNIe] mDNIe_tuning_initialize: addr(0x98), data(0x5c)
<6>[mDNIe] mDNIe_tuning_initialize: addr(0x9c), data(0x10)
<6>[mDNIe] mDNIe_tuning_initialize: addr(0xac), data(0x0)
<6>[mDNIe] mDNIe_tuning_initialize: addr(0xb4), data(0x3ff)
[mDNIe] mDNIe_Set_Mode: current_mDNIe_UI(6), current_mDNIe_OutDoor_OnOff(0)
<3>panel_reset_lcd
<6>s3cfb_late_resume is complete
<6>s3cfb s3cfb: registered successfully
<6>s5pv210-uart.0: s3c2410_serial0 at MMIO 0xe2900000 (irq = 16) is a S3C6400/10
<6>s5pv210-uart.1: s3c2410_serial1 at MMIO 0xe2900400 (irq = 20) is a S3C6400/10
<6>s5pv210-uart.3: s3c2410_serial3 at MMIO 0xe2900c00 (irq = 28) is a S3C6400/10
PA FB = 0x4DB06000, bits per pixel = 32
screen width=480 height=800 va=0xedb06000 pa=0x4db06000
xres_virtual = 480, yres_virtual = 1600, xoffset = 0, yoffset = 0
fb_size=3072000
Back frameBuffer[0].VAddr=edc7d000 PAddr=4dc7d000 size=1536000
No space for NV12 video carveout
<6>brd: module loaded
<6>loop: module loaded
<6>Android kernel panic handler initialized (bind=kpanic)
<6>sec_jack_probe : Registering jack driver
<6>wake enabled for irq 38
<6>sec_jack_init_jack_state<6>sec_jack_set_micbias_state: HWREV=15, on=1
<6>handle_jack_not_inserted
<6>sec_jack_set_micbias_state: HWREV=15, on=0
<6>sec_jack_set_micbias_state: HWREV=15, on=0
<6>wake enabled for irq 167
<6>fsa9480 7-0025: dev1: 0x4, dev2: 0x0
<4>i2c-core: driver [fsa9480] using legacy suspend method
<4>i2c-core: driver [fsa9480] using legacy resume method
<6>modem_io_init done
<6>[MODEM] bp_irq() - PHONE_ACTIVE interrupt, 1 occurence
<6>wake enabled for irq 47
<6>wake enabled for irq 43
<6>modemctl probed
<6>Muxed OneNAND 512MB 1.8V 16-bit (0x50)
<6>OneNAND version = 0x013e
<7>Chip support all block unlock
<7>Chip has 4KiB pagesize
<7>Chip has cache program feature
<6>Scanning device for bad blocks
<7>onenand_bbt_wait: ecc 0xaaaa ctrl 0x0400 intr 0x8080 addr1 0x1dd addr8 0x0
<6>OneNAND eraseblock 477 is an initial bad block
<7>onenand_bbt_wait: ecc 0xaaaa ctrl 0x0400 intr 0x8080 addr1 0x6cf addr8 0x0
<6>OneNAND eraseblock 1743 is an initial bad block
<7>onenand_bbt_wait: ecc 0xaaaa ctrl 0x0400 intr 0x8080 addr1 0x73f addr8 0x0
<6>OneNAND eraseblock 1855 is an initial bad block
<6>OneNAND eraseblock 2047 is an initial bad block
<5>Creating 2 MTD partitions on "(null)":
<5>0x00001e700000-0x00001ec00000 : "nv_data"
<5>0x000003300000-0x000003600000 : "fota"
<6>tl2796: c0, b-6bea38dc, got v 2051000, factory wants 2051000
<6>tl2796: c1, b-7f519b2b, got v 2044000, factory wants 2044000
<6>tl2796: c2, b-ae797fc2, got v 1491000, factory wants 1491000
<6>tl2796_probe successfully probed
<6>PPP generic driver version 2.4.2
<6>PPP Deflate Compression module registered
<6>PPP BSD Compression module registered
<6>PPP MPPE Compression module registered
<6>NET: Registered protocol family 24
<6>tun: Universal TUN/TAP device driver, 1.6
<6>tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
<6>s3c-udc : S3C HS USB Device Controller Driver, (c) 2008-2009 Samsung Electronics
s3c-udc : version 15 March 2009 (DMA Mode)
<6>android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>android_usb gadget: Number of LUNs=2
<6> lun0: LUN: removable file: (no medium)
<6> lun1: LUN: removable file: (no medium)
<6>android_usb gadget: android_usb ready
<7>Registered gadget driver 'android_usb'
<6>input: gpio-keys as /devices/platform/gpio-keys.0/input/input0
<6>input: s5pv210-keypad as /devices/platform/s5pv210-keypad/input/input1
<6>usbcore: registered new interface driver xpad
<6>usbcore: registered new interface driver usb_acecad
<6>acecad: v3.2:USB Acecad Flair tablet driver
<6>usbcore: registered new interface driver aiptek
<6>aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)
<6>aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen
<6>usbcore: registered new interface driver gtco
GTCO usb driver version: 2.00.0006<6>usbcore: registered new interface driver hanwang
<6>usbcore: registered new interface driver kbtab
<6>kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
<6>usbcore: registered new interface driver wacom
<6>wacom: v1.52:USB Wacom tablet driver
<6>input: mxt224_ts_input as /devices/virtual/input/input2
<6>Atmel MXT224 2-004a: family = 0x80, variant = 0x1, version = 0x16, build = 171
<6>bma023 5-0038: bma023 found
<6>bma023 5-0038: al_version=2, ml_version=1
<6>input: accelerometer_sensor as /devices/virtual/input/input3
<3>gp2a: proximity val = 1
<6>input: proximity as /devices/virtual/input/input4
<6>input: orientation_sensor as /devices/virtual/input/input5
<6>max8998-rtc max8998-rtc: RTC CHIP NAME: max8998-rtc
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
<6>s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
<6>s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
<6>s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
<6>s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
<6>using rtc device, s3c, for alarms<6>s3c-rtc s3c2410-rtc: rtc core: registered s3c as rtc0
<6>i2c /dev entries driver
<6>lirc_dev: IR Remote Control driver registered, major 251
<6>IR NEC protocol handler initialized
<6>IR RC5(x) protocol handler initialized
<6>IR RC6 protocol handler initialized
<6>IR JVC protocol handler initialized
<6>IR Sony protocol handler initialized
<6>IR RC5 (streamzap) protocol handler initialized
<6>IR LIRC bridge handler initialized
<6>Linux video capture interface: v2.00
<6>mfc_init: <6>S5PC110 MFC Driver, (c) 2009 Samsung Electronics
<6>S3C JPEG Driver, (c) 2007 Samsung Electronics
<6>JPEG driver for S5PV210
<4>i2c-core: driver [s5p_ddc] using legacy suspend method
<4>i2c-core: driver [s5p_ddc] using legacy resume method
<4>i2c-core: driver [Si4709] using legacy suspend method
<4>i2c-core: driver [Si4709] using legacy resume method
<6>device-mapper: uevent: version 1.0.3
<6>device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
<6>Bluetooth: HCI UART driver ver 2.2
<6>Bluetooth: HCI H4 protocol initialized
<6>cpuidle: using governor ladder
<6>cpuidle: using governor menu
<6>sdhci: Secure Digital Host Controller Interface driver
<6>sdhci: Copyright(c) Pierre Ossman
<6>s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133400000 Hz)
<6>s3c-sdhci s3c-sdhci.0: clock source 2: sclk_mmc (51307692 Hz)
<6>mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
<6>s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133400000 Hz)
<6>s3c-sdhci s3c-sdhci.1: clock source 2: sclk_mmc (47642857 Hz)
<6>mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA
<6>s3c-sdhci s3c-sdhci.2: clock source 0: hsmmc (133400000 Hz)
<6>s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (47642857 Hz)
<6>mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
<6>usbcore: registered new interface driver usbhid
<6>usbhid: USB HID core driver
<6>logger: created 256K log 'log_main'
<6>logger: created 256K log 'log_events'
<6>logger: created 256K log 'log_radio'
<6>logger: created 256K log 'log_system'
<6>zram: num_devices not specified. Using default: 1
<6>zram: Creating 1 devices ...
<6>WM8994 Audio Codec 0.1
wm8994_extensions: initializing driver v10
<6>s3c_idma_preallocate_buffer: VA-f00c0000 PA-C0000000 163840bytes
<6>asoc: WM8994 PAIFRX <-> samsung-i2s.0 mapping ok
<6>ALSA device list:
<6> #0: smdkc110
<6>oprofile: using arm/armv7
<6>GACT probability NOT on
<6>Mirror/redirect action on
<6>u32 classifier
<6> Actions configured
<6>Netfilter messages via NETLINK v0.30.
<6>nf_conntrack version 0.5.0 (4257 buckets, 17028 max)
<6>ctnetlink v0.93: registering with nfnetlink.
<6>NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>xt_time: kernel timezone is -0000
<6>ip_tables: (C) 2000-2006 Netfilter Core Team
<6>arp_tables: (C) 2002 David S. Miller
<6>TCP cubic registered
<6>NET: Registered protocol family 10
<6>mmc0: new high speed MMC card at address 0001
<6>Mobile IPv6
<6>ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>mmcblk0: mmc0:0001 M2G1DD 1.91 GiB
<6>IPv6 over IPv4 tunneling driver
<6> mmcblk0: p1 p2 p3
<6>NET: Registered protocol family 17
<6>NET: Registered protocol family 15
<6>Bluetooth: RFCOMM TTY layer initialized
<6>Bluetooth: RFCOMM socket layer initialized
<6>Bluetooth: RFCOMM ver 1.11
<6>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>NET: Registered protocol family 35
<6>VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
<6>ThumbEE CPU extension supported.
<6>s5pv210_cpufreq_init: S5PV210 cpu-freq driver
<6>regulator_init_complete: pd_mfc_supply: disabling
<6>regulator_init_complete: pd_tv_supply: disabling
<6>regulator_init_complete: pd_cam_supply: disabling
## wifi_probe
wifi_set_power = 1
wifi_set_carddetect = 1
<4>mmc1: queuing unknown CIS tuple 0x80 (50 bytes)
<4>mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
<4>mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
<6>mmc1: new SDIO card at address 0001
F1 signature read @0x18000000=0x9934329
DHD: dongle ram size is set to 294912(orig 294912)
wl_create_event_handler thr:3d started
dhd_attach thr:3e started
dhd_attach thr:3f started
dhd_attach thr:40 started
Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
Dongle Host Driver, version 5.90.195.104
Compiled in drivers/net/wireless/bcmdhd on Nov 5 2013 at 22:34:41
wifi_set_power = 0
=========== WLAN placed in RESET ========
<6>s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
<6>s3c-rtc s3c2410-rtc: setting system clock to 2010-12-31 23:07:37 UTC (1293836857)
<6>FIMC0 registered successfully
<6>FIMC1 registered successfully
<6>FIMC2 registered successfully
<6>S5P TVOUT Driver, (c) 2010 Samsung Electronics
<4>clk_get: could not find clock mout_vpll_src for dev s5p_device_tvout+0x8/0xd8 (s5p-tvout)
<3>failed to find clock "mout_vpll_src"
<6>s5p-tvout s5p-tvout: hpd status: cable removed/not connected
<6>s5p_tv_probe TV Probing is done
<6>max8998_charger_probe : MAX8998 Charger Driver Loading
<6>max8998_charger_probe : pmic interrupt registered
<6>check_lpm_charging_mode : lpm_charging_mode(0)
<6>wake enabled for irq 39
<7>s3c_bat_discharge_reason : Current charge level : 50%
Current time : 6 discharging_time : 0
discharging reason : 0
<7>max8998_charging_control : USB charging enabled
<6>max8998_set_cable : status(1)
<7>max8998_charging_control : USB charging enabled
<7>s3c_bat_discharge_reason : Current charge level : 50%
Current time : 6 discharging_time : 21606
discharging reason : 0
<4>Warning: unable to open an initial console.
<7>init_post begin
<6>Freeing init memory: 6204K
<7>max8998_charging_control : USB charging enabled
OHAI, stage1 init starting
<7>s3c_bat_discharge_reason : Current charge level : 50%
Current time : 6 discharging_time : 21606
discharging reason : 0
<7>max8998_charging_control : USB charging enabled
<7>s3c_bat_discharge_reason : Current charge level : 50%
Current time : 56 discharging_time : 21606
discharging reason : 0
<7>max8998_charging_control : USB charging enabled
<3>bio too big device loop0 (2 > 0)
<3>EXT4-fs (loop0): unable to read superblock
<6>EXT4-fs (loop1): mounted filesystem with ordered data mode. Opts: (null)
<7>s3c_bat_discharge_reason : Current charge level : 50%
Current time : 80 discharging_time : 21606
discharging reason : 0
<7>max8998_charging_control : USB charging enabled
stage1 log:
Fri Dec 31 23:07:37 GMT 2010
Creating filesystem with parameters:
Size: 18874368
Block size: 4096
Blocks per group: 32768
Inodes per group: 1152
Inode size: 256
Journal blocks: 1024
Label:
Blocks: 4608
Block groups: 1
Reserved block group size: 7
Created filesystem with 11/1152 inodes and 1110/4608 blocks
Creating filesystem with parameters:
Size: 419430400
Block size: 4096
Blocks per group: 32768
Inodes per group: 6400
Inode size: 256
Journal blocks: 1600
Label:
Blocks: 102400
Block groups: 4
Reserved block group size: 31
Created filesystem with 11/25600 inodes and 3310/102400 blocks
force_recovery: 1
losetup: /dev/loop0: No such file or directory
mount: mounting /dev/loop0 on /system failed: Invalid argument
umount: can't umount /system: Invalid argument
losetup: /dev/loop2: No such device or address
losetup: /dev/loop0: No such device or address
5708 blocks
Fri Dec 31 23:09:02 GMT 2010
<3>init: cannot open '/initlogo.rle'
.
.
.
Taken from XXLA1 with zImage only... cm-10.1-wave-v2.1...
Interesting to see this...
Code:
<6>Memory: 69MB 214MB 0MB = 283MB total
<5>Memory: 272496k/325052k available, 17988k reserved, 0K highmem
<5>Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xff000000 - 0xffe00000 ( 14 MB)
vmalloc : 0xf0000000 - 0xfc000000 ( 192 MB)
lowmem : 0xc0000000 - 0xeff00000 ( 767 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.init : 0xc0008000 - 0xc0617000 (6204 kB)
.text : 0xc0617000 - 0xc0ce8000 (6980 kB)
.data : 0xc0ce8000 - 0xc0d34880 ( 307 kB)
.bss : 0xc0d348a4 - 0xc0e76ad8 (1289 kB)
Best Regards
This is my solution for now... with S8500. Tested by me.
In theory should work with S8530 too...
Later I will move to cable solution with Micro USB + Resistor...
Then hopefully this is working also with S8600 and S5250 for instance...
Best Regards
http://forum.xda-developers.com/showpost.php?p=41670635&postcount=5
In this FPM Mode... I can use AT Commands via UART...
So for now I can read and write something via UART...
Later more...
Best Regards
Made today few stupid mistakes....
510 R instead K...
Then confuse Pin 4 and 5 ...
I have 510 KOHM, but nothing happens...
Maybe not correct enough...
http://forum.xda-developers.com/showthread.php?t=820275
Code:
RID_FM_BOOT_ON_UART, /* 1 1 1 0 1 [B]619K[/B] Factory Mode Boot ON-UART */
I have used 620 KOHM with S8500 and S8600...
Factory Test Mode start ... this thingie with blue then green Screen... but nothing UART out nor input...
Maybe my wires wrong...
Will buy more Resistors...
Best Regards
Edit 1.
No idea yet, where is my mistake...
http://www.droidforums.net/forum/dr...own-motorola-factory-cable-4.html#post2234017
Backside Pinout...
I have now 510 KOHM + 13 KOHM = 523 KOHM...
Flashed to XXJEB to be sure...
Edit 2.
Check up...
My USB converter is alive...
Pin 4 and 5 should be correct, because Resistor Values working...
Will change Pin 2 and 3...
My fault...
For S8530 and S8500 now working.
Code:
[PAM: ] OneNAND physical base address : 0xb0000000
[PAM: ] OneNAND virtual base address : 0xb0000000
[PAM: ] FSR_PAM_InitNANDController Success!!
[PAM: ] --FSR_PAM_Init
bl3_info_block 1 age = 17
bl3_info_block 2 age = 18
BL3_2 Loading
+-------------------------------+
| Bootloader Shadowing FINISHED |
+-------------------------------+
Launch Image at 0x42080000
[BOOT_V1.0 (Jan 5 2012, 19:05:00)]
SelectBootingMode: H/W...0x3.
[BOOT] ARMCLK: 400000 KHz, MSYSHCLK 200000 KHz,MSYSPCLK: 100000 KHz, [BOOT] DSYSHCLK 166750 KHz,DSYSPCLK: 83375 KHz,PSYSHCLK: 133400 KHz, PSYSPCLK: 66700 KHz,SYSCON_A2M: 200000 KHz
Flash_Unlock failed
Poweron status - 20
FSA9480 0x03 Register = 1
FSA9480 0x0A Register = 0
FSA9480 0x0B Register = 8
FSA9480 0x07 Register = 1c
SelectBootingMode: Boot Mode = 1...
+++FIMD_Drv_INITIALIZE
FIMD_Drv_ChangeMode: MDNIE_MODE
Frame Rate:62 SCLK_FIMD:133400 kHz ClkDiv:4
---FIMD_Drv_INITIALIZE
---FIMD_Drv_SetWinOnOff(WIN4:1)
LCD initialize Finished
Display_LSI_Boot : disp_Main_Clean
Display_LSI_Boot : disp_Main_Clean_All
Display_LSI_Boot : disp_dimming_backlight
Display_LSI_Boot : disp_Normal_Init
DRV_modem_reset!!!!!!!!!!!!!!!!!
DRV_Send_DBL!!!!!!!!!!!!!!!!!
[DLOAD] Download Completed !!!
DRV_Wait_ModemInit!!!!!!!!!!!!!!!!!
DRV_CopyQSCBootBinary!!!!!!!!!!!!!!!!!
DRV_Send_BootBinaryCopyComplete!!!!!!!!!!!!!!!!!
DRV_Modem_BootingStart retry count = 0.
AST_POWERON
get_usb_sw_nv 0x40000
USBSwitch : AP
get_uart_sw_nv 0x40000
UARTSwitch : AP
My S8530 first UART output... with cable.
On XXKK5 with S8600 no luck... will try older Firmware...
Best Regards
Edit 1.
S8000 Jet
Code:
USBSwitch : AP
[BB31] VDD INT 1.2V
[BB31] VDD ARM 1.325V
ARM Clock: 400MHz --> 800MHz
[BOOT][DBG] RST_STAT 0x7E00_F904 : 0x00000001
[BOOT] ARMCLK: 800000, MPLL: 194000, HCLKX2: 266666, HCLK: 133333, PCLK: 33333
BootHWCheck: 6...
SelectBootingMode: H/W...0x6.
Poweron status - 10
pPowerOn 0 = 0xB00717E3
pPowerOn 1 = 0x0
pPowerOn 2 = 0x0
pPowerOn 3 = 0x10
pPowerOn 4 = 0x0
pPowerOn 5 = 0x0
pPowerOn 6 = 0x0
pPowerOn 7 = 0x0
pPowerOn 8 = 0x0
pPowerOn 9 = 0x0
pPowerOn 10 = 0x0
pPowerOn 11 = 0x0
pPowerOn 12 = 0x6
pPowerOn 13 = 0x0
FSA9480 0x03 Register = 1
FSA9480 0x0A Register = 0
FSA9480 0x0B Register = 8
FSA9480 0x07 Register = 1C
SelectBootingMode: Boot Mode = 1...
================================
LCD Source CLK -> MPLL(194000)
================================
uClkVal = 0x7 , uClkDir = 0x1
========================================
uVidconReg = 0x1D4 , uClkVal = 0x7
========================================
DRV_modem_reset!!!!!!!!!!!!!!!!!
DRV_Send_DBL!!!!!!!!!!!!!!!!!
[DLOAD] Download Completed !!!
DRV_Wait_MSMInit!!!!!!!!!!!!!!!!!
DRV_CopyMSMBootBinary!!!!!!!!!!!!!!!!!
DRV_Send_BootBinaryCopyComplete!!!!!!!!!!!!!!!!!
Ownership Release 0x5DFFF800, 0x0
AST_POWERON
get_usb_sw_nv 0x0
USBSwitch : AP
get_uart_sw_nv 0x0
UARTSwitch : AP
Drv_TaskEntry Start
DRV_Device_Init...
DRV_Device_Init...: DRV_hwversion = 6.
FSA9480 device ID = 40
JIT UART OFF NU_PWM_FID_SET_GPIO_PWMTOUT ok
prox_sensor_init SUCCESS~~~~~~~~~~~
[BOOT][Err] LCD_DET set PULLDOWN .
[LCD] ESD interrupt enable
acc_sensor_init SUCCESS~~~~~~~~~~~
pif_TaskEntry Start
[MODEMIF_AP_Init] NU_Create_Task pif task success
Create TESTMODE_Queue
Create testmode_task
Create TMFIFO_Queue
Create TESTMODE_RPT_Timer
brcm_bluetooth_main: Start Bluetooth Thread by BootEntry
0002 000.082 0.001.00.00:0000 SYSTEM > MochaTask: OSAL created.
0003 000.084 0.001.00.00:0000 BOOTMGR > MochaTask: OSAL created.
0004 000.091 0.001.00.00:0000 BOOTMGR > MochaTask: UART, USB, and Bluetooth created.
usb_api_open
usb_api_open
0005 000.100 0.001.00.00:0000 SYSTEM > MochaTask: DiagMgr created.
0006 000.106 0.001.00.00:0000 BOOTMGR > MochaTask: DiagMgr created.
0007 000.112 0.001.00.00:0000 EXCEPTION > __MemAllocForDebugHeap: Allocate 1200Kbytes (file OEM\OemDevFIFO.c, line 106)
0008 000.122 0.001.00.00:0000 AGENT > [__SysSecureBootRegisterPktRcvCallback:SysSecureBootPacket.c] __SysSecureBootRegisterPktRcvCallback is called!
0009 000.136 0.001.-1.-1:0000 BOOTMGR > MochaTask: EventMgr created.
0010 000.144 0.001.-1.-1:0000 BOOTMGR > MochaTask: AvMedia created.
0011 000.148 0.001.-1.-1:0000 ALL > DevGetHomeDLFlag : Address(0x0f940000) flag(0x0000ffff)
0012 000.157 0.001.-1.-1:0000 BOOTMGR > MochaTask: Clock created.
0013 000.162 0.001.-1.-1:0000 BOOTMGR > MochaTask: LED created.
0014 000.168 0.001.-1.-1:0000 BOOTMGR > MochaTask: Flip created.
0015 000.174 0.001.-1.-1:0000 SYSTEM > MochaTask: Clock, LED, Flip created.
+SDHC_Open(Ch1)
[SDHC] SDHC(ch1) Operating Clock : 378906Hz
[DS] data_srvc_task() Enter
[DS] diag_srvc_task() Enter
Diag_TaskEntry Start
I9000 tested with success...
So my cable work now with diffferent Samsung handsets...
Accept S8600 ...
Tested also with XXKJ7...
Need few days. Then test with S5250 will follow...
http://forum.xda-developers.com/showthread.php?t=1901376
I9001 is little bit similar to S8600... maybe helpfull.
Also usefull about UART:
http://forum.xda-developers.com/showthread.php?t=1209288
http://forum.xda-developers.com/showthread.php?t=1629359
Best Regards
UART on S5250 work, but not much info... yet...
Code:
AST_POWERON
*MRDY: 1
,~Booting Completed
This is output, if DL Mode...
Code:
AST_DOWNLOAD
I can set UART Logging temporary...
More text...
Best Regards