Related
I have an I747 on T-Mobile.
I recently installed SlimBean 4.3 on it, and it started up and worked fine. But when I went to restart it, it hung on the "SlimBean" screen. Never got to the bootanimation.
I read online that there's issues when coming from another 4.3 rom, and I had previously been running CyanogenMod 10.2, although it was a nightly and it crashed, corrupting my data. I decided not to try that again.
So after that experience with SlimBean, I tried to flash BeanStalk from the T-Mobile GS3 forum. This is also a 4.3 rom, and it ran fine on my I747, except when I went to reboot. It too hung on the logo.
And yes, I have wiped internal storage, and I'm running the latest version of TWRP. I even tried to flash Samsung's stock firmware with Odin, and it worked, but it wouldn't boot (or maybe I'm overestimating how quickly TouchWiz can boot). It overrode my recovery, like I was expecting, so I flashed TWRP with Odin and then proceeded to flash SlimBean 4.3 again. Same problem.
Does anyone have a solution to this? It's been driving me crazy. I will try some other 4.3 roms and see if they're all doing this.
danielhep said:
I have an I747 on T-Mobile.
I recently installed SlimBean 4.3 on it, and it started up and worked fine. But when I went to restart it, it hung on the "SlimBean" screen. Never got to the bootanimation.
I read online that there's issues when coming from another 4.3 rom, and I had previously been running CyanogenMod 10.2, although it was a nightly and it crashed, corrupting my data. I decided not to try that again.
So after that experience with SlimBean, I tried to flash BeanStalk from the T-Mobile GS3 forum. This is also a 4.3 rom, and it ran fine on my I747, except when I went to reboot. It too hung on the logo.
And yes, I have wiped internal storage, and I'm running the latest version of TWRP. I even tried to flash Samsung's stock firmware with Odin, and it worked, but it wouldn't boot (or maybe I'm overestimating how quickly TouchWiz can boot). It overrode my recovery, like I was expecting, so I flashed TWRP with Odin and then proceeded to flash SlimBean 4.3 again. Same problem.
Does anyone have a solution to this? It's been driving me crazy. I will try some other 4.3 roms and see if they're all doing this.
Click to expand...
Click to collapse
p
I had something that sounds similar when I was trying to update from task's 4.2.2 to 4.3. Kept stopping at the kernel screen ( after the usual wiping of caches and system). Finally, someone recommended that, in addition to wiping data, that I format data as well. This basically wipes everything (i was using twrp 2.3.3.1). After doing this, I reinstalled the ROM and gapps and it works now.
Not sure this is what you experienced but it sounded similar. Before doing anything else, be sure that you have a back up and that you have removed any external sd card, should you have to go back. Good luck.
captican said:
p
I had something that sounds similar when I was trying to update from task's 4.2.2 to 4.3. Kept stopping at the kernel screen ( after the usual wiping of caches and system). Finally, someone recommended that, in addition to wiping data, that I format data as well. This basically wipes everything (i was using twrp 2.3.3.1). After doing this, I reinstalled the ROM and gapps and it works now.
Not sure this is what you experienced but it sounded similar. Before doing anything else, be sure that you have a back up and that you have removed any external sd card, should you have to go back. Good luck.
Click to expand...
Click to collapse
Yeah, I did that. I wiped everything I could and formatted data. Maybe I should try installing a different kernel?
With your issue, was it stopping on the first boot or did you get it running once then it stopped?
danielhep said:
I have an I747 on T-Mobile.
I recently installed SlimBean 4.3 on it, and it started up and worked fine. But when I went to restart it, it hung on the "SlimBean" screen. Never got to the bootanimation.
I read online that there's issues when coming from another 4.3 rom, and I had previously been running CyanogenMod 10.2, although it was a nightly and it crashed, corrupting my data. I decided not to try that again.
So after that experience with SlimBean, I tried to flash BeanStalk from the T-Mobile GS3 forum. This is also a 4.3 rom, and it ran fine on my I747, except when I went to reboot. It too hung on the logo.
And yes, I have wiped internal storage, and I'm running the latest version of TWRP. I even tried to flash Samsung's stock firmware with Odin, and it worked, but it wouldn't boot (or maybe I'm overestimating how quickly TouchWiz can boot). It overrode my recovery, like I was expecting, so I flashed TWRP with Odin and then proceeded to flash SlimBean 4.3 again. Same problem.
Does anyone have a solution to this? It's been driving me crazy. I will try some other 4.3 roms and see if they're all doing this.
Click to expand...
Click to collapse
I had the same problem since 4.3 came out. It has to do with partition tables... What i've done to correct the problem:
- Odin back to stock
- Format entire phone. (Complete wipe) + Dalvik and cache
- Odin stock with root
- Replaced TWRP recovery for CWM
- Flashed 4.3 ROM and VOILA
- I have tried every 4.3 rom ever since with no problems
Don't (Complete wipe) with Twrp recovery, it seems to mess up the partitions.
Hope this works for you
Cheers
danielhep said:
Yeah, I did that. I wiped everything I could and formatted data. Maybe I should try installing a different kernel?
With your issue, was it stopping on the first boot or did you get it running once then it stopped?
Click to expand...
Click to collapse
It loaded the first time and then rebooted, freezing on the kernel screen. I could get into recovery, and restore a previous ROM but it would hang up on 4.3. I described the steps I had taken when someone suggested reformatting data. I tried again and it is working now.
The method described in the other post may also solve your problem. I say that because I cannot update twrp to 2.6.1, at least via goo manager. I have not tried using Odin to update (yet).
I have this same as problem. It's annoying. I reflashed the rom 15 times yesterday. I'm gonna try and see if Deathstrings idea works.
Sent from my SGH-I747 using XDA Premium 4 mobile app
I managed to load a stock rom back to the phone but again, it hung on the SAMSUNG screen. Took it to "a guy" and he did a
key sequence and got it to boot. Woulnd't tell me what it was........
ANy one know???
Apocalypse487 said:
I have this same as problem. It's annoying. I reflashed the rom 15 times yesterday. I'm gonna try and see if Deathstrings idea works.
Sent from my SGH-I747 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
This happened to me after I flashed back but formatting data got it to work (but I have had more problems with apps not installing properly but I learned how to deal with that...still cannot update TWRP via goo manager; waiting on trying it with Odin).
So, first off, just wanna say that I have a RIDICULOUS amount of experience with flashing roms. Literally over 100 different devices and 1000s of different flashes of my own devices on top of it. Quite familiar with this S2 as well and have customized them to all sorts of extents, but this one has me baffled. This phone refuses to run 4.2.2/4.3/4.4.x roms. Using the most up to date radio and the suggested TWRP (2.6.1.0) as well as CWM 6.0.44 and the newer TWRP: 2.6.3.0. Every time the phone will get to the set up screen, refreeze and boot. No issues running stock or stock based 4.1.2 roms. I've tried changing recoveries, wiping everything (/system, /data, /caches) repeatedly, Odin back to stock and redoing everything, switching kernels, wiping caches before rebooting and leaving it be, changing batteries, etc but nothing has worked. So far I've tried BlackLiquid 2.92 (4.2.2 stable), Awesome Audio rom (4.3), official CM11 (whatever the last build up was last night), and BeanStalk 4.4.2 (12/16) and all behave exactly the same - freeze on start up and reboot. This doesn't seem to be much of a widespread issue obviously, so just baffled and getting a bit frustrated as this should have been a 20 minute process that has turned into a few hours already. Since USB Debugging isn't on by default on newer roms, how would I even do a logcat to see if there is anything meaningful there? Any ideas?
Update: I have another S2. Performed same steps, same TWRP, same radio and rom, on same external SD card and that one booted right up like normal confirming that it is the phone itself, but what causes that?? Corrupted partitions?
I have the same problem, just format your internal and external sd card with just ROM file on your storage then try to install, than please inform me
Sent from my SGH-T989 using XDA Premium 4 mobile app
iamdofus said:
I have the same problem, just format your internal and external sd card with just ROM file on your storage then try to install, than please inform me
Sent from my SGH-T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Nope. No luck there (only tried Beanstalk so far, but exact same issue). Thanks for the suggestion though! Only using internal storage, no SD card, though thinking I might try that next...
Edit: Just to be thorough, I formatted internal storage via TWRP and my computer then readded the files and just tried to boot rom only and freezes before I can do anything.
Do you by chance have a refurbished s2?
The screen has been replaced by a friend of mine and he managed to mess up the soft keys with it, but everything else functions. That's actually why he sent it to me, so I could hook him up with Pie and all that kind of thing so the soft keys aren't an issue. What's your thoughts on the refurb side of it?
es0tericcha0s said:
The screen has been replaced by a friend of mine and he managed to mess up the soft keys with it, but everything else functions. That's actually why he sent it to me, so I could hook him up with Pie and all that kind of thing so the soft keys aren't an issue. What's your thoughts on the refurb side of it?
Click to expand...
Click to collapse
OK thanks for reply, I have one more solution give me. Some time I will give try that it worked for me.
Sent from my SGH-T989 using XDA Premium 4 mobile app
es0tericcha0s said:
Nope. No luck there (only tried Beanstalk so far, but exact same issue). Thanks for the suggestion though! Only using internal storage, no SD card, though thinking I might try that next...
Edit: Just to be thorough, I formatted internal storage via TWRP and my computer then readded the files and just tried to boot rom only and freezes before I can do anything.
Click to expand...
Click to collapse
ok lets stat it with this
1) download both the scripts of infamous wipe cache and infamous super wipe.
2) format your both SD card with PC (FAT32)
2) put both these wipe files and and your rom file ( i prefer try slimbean rom first)
3) Now in twrp 2.6.0.0- follow the steps
i) format your phone with twrp options
ii) again format your phone with infamous super file. (by going in to INSTALL ZIP file option in TWRP)
iii) than format with infamouse cache file (by going in to INSTALL ZIP file option in TWRP)
iv) install your rom and compatiable GAPPS zip file.
v) after installing or somewhere between procedure if twrp says something about supersu birnaries are not correct than click on DO . NOT FIX
vi) again format infamouse cache wipe.
vii) now FINALLY reboot the rom.
it should work, and it worked for me. if u sucessfully run the rom than you can eailsy run all the AOSP roms in this forum. Again If you try this please do tell me what happend.
Followed to a "T" and still in the same boat - freezes after bootup. I used those same steps before with another darkside wipe script (maybe older?) but yea, have already been down that road. I did downgrade to 2.6.0.0 and used Slim 4.3 because 4.4 is supposed to use the newer TWRP, just to be certain, but GRRR. I guess we're just gonna have to settle for a 4.1.2 rom and call it a day. :/
So here are the log output from the wipes:
https://dl.dropboxusercontent.com/u/9903887/INFAMOUS.SUPER.WIPE_recovery.log
https://dl.dropboxusercontent.com/u/9903887/INFAMOUS.CACHE.WIPE_recovery.log
I see some stuff at the bottom of those that might indicate something weird, but I am not adept at interpreting these, so just wondering if someone could point me to the right direction about the repair checks and what not listed on these. Thanks!
Edit 2: I did get a AOSP based 4.1.2 rom to boot with no problems! wtf... LoL
Last Edit:
Problem solved! I used basically the same steps I had been doing but once the AOSP 4.1.2 rom booted then now everything works like it should again. Have loaded a 4.3 and 4.4 rom successfully. Thanks for the help!
es0tericcha0s said:
So, first off, just wanna say that I have a RIDICULOUS amount of experience with flashing roms. Literally over 100 different devices and 1000s of different flashes of my own devices on top of it. Quite familiar with this S2 as well and have customized them to all sorts of extents, but this one has me baffled. This phone refuses to run 4.2.2/4.3/4.4.x roms. Using the most up to date radio and the suggested TWRP (2.6.1.0) as well as CWM 6.0.44 and the newer TWRP: 2.6.3.0. Every time the phone will get to the set up screen, refreeze and boot. No issues running stock or stock based 4.1.2 roms. I've tried changing recoveries, wiping everything (/system, /data, /caches) repeatedly, Odin back to stock and redoing everything, switching kernels, wiping caches before rebooting and leaving it be, changing batteries, etc but nothing has worked. So far I've tried BlackLiquid 2.92 (4.2.2 stable), Awesome Audio rom (4.3), official CM11 (whatever the last build up was last night), and BeanStalk 4.4.2 (12/16) and all behave exactly the same - freeze on start up and reboot. This doesn't seem to be much of a widespread issue obviously, so just baffled and getting a bit frustrated as this should have been a 20 minute process that has turned into a few hours already. Since USB Debugging isn't on by default on newer roms, how would I even do a logcat to see if there is anything meaningful there? Any ideas?
Update: I have another S2. Performed same steps, same TWRP, same radio and rom, on same external SD card and that one booted right up like normal confirming that it is the phone itself, but what causes that?? Corrupted partitions?
Click to expand...
Click to collapse
Interesting, so you're saying it's phone specific?
That begs to ask other questions now:
1. Where did this phone come from? is it a Tmobile version (SGH-T989) or AT&T (i-1900)?
2. You mentioned you got it from a friend; did it come rooted? unlocked? Or did you have to do that process yourself?
UltimaniumX said:
Interesting, so you're saying it's phone specific?
That begs to ask other questions now:
1. Where did this phone come from? is it a Tmobile version (SGH-T989) or AT&T (i-1900)?
2. You mentioned you got it from a friend; did it come rooted? unlocked? Or did you have to do that process yourself?
Click to expand...
Click to collapse
Yep, very much phone specific. Used same recovery, same rom zip and gapps off the same external SD card, to be certain. That one updated just like every other S2 I've done. And it's the Tmo version. The At&t models are i777 S2 or i727 S2 Skyrocket. The i9100 is international and has a physical home button. But the phone was not modified at all. No root, custom recovery, etc. I was only able to resolve it by first starting with an AOSP 4.1.2 rom and working my way up to 4.4. One of the weirder issues I've come across.
es0tericcha0s said:
Followed to a "T" and still in the same boat - freezes after bootup. I used those same steps before with another darkside wipe script (maybe older?) but yea, have already been down that road. I did downgrade to 2.6.0.0 and used Slim 4.3 because 4.4 is supposed to use the newer TWRP, just to be certain, but GRRR. I guess we're just gonna have to settle for a 4.1.2 rom and call it a day. :/
So here are the log output from the wipes:
https://dl.dropboxusercontent.com/u/9903887/INFAMOUS.SUPER.WIPE_recovery.log
https://dl.dropboxusercontent.com/u/9903887/INFAMOUS.CACHE.WIPE_recovery.log
I see some stuff at the bottom of those that might indicate something weird, but I am not adept at interpreting these, so just wondering if someone could point me to the right direction about the repair checks and what not listed on these. Thanks!
Edit 2: I did get a AOSP based 4.1.2 rom to boot with no problems! wtf... LoL
Last Edit:
Problem solved! I used basically the same steps I had been doing but once the AOSP 4.1.2 rom booted then now everything works like it should again. Have loaded a 4.3 and 4.4 rom successfully. Thanks for the help!
Click to expand...
Click to collapse
What did you exactly do? I flashed a 4.1.2 and then flashed a 4.3 based ROM and it didn't work. What recovery version did you use to flash the 4.3 ROM?
tpag02 said:
What did you exactly do? I flashed a 4.1.2 and then flashed a 4.3 based ROM and it didn't work. What recovery version did you use to flash the 4.3 ROM?
Click to expand...
Click to collapse
Sorry, I don't pay attention to the notifications on XDA very often. I don't usually browse the S2 forums unless needed because I have an N5, but anyway... The 4.1.2 rom you used, was it TW or AOSP type? I used 2.6.0 to wipe everything, then used cache and superwipe zips then 4.1.2 AOSP type rom then cache wipe zip again then after that booted, I was able to go back to 2.6.1 and flash a 4.3 via wiping, wipe zips, installing rom then cache wipe again. After that, repeated with a KK rom and now it loads roms just like it should. If you want more precise help, feel free to hit me up on Hangouts with my username: es0tericcha0s. Good luck! I know how frustrating it can be when it gets a little out of whack like this...
I'm in the same boat
Same here. I just bought a galaxy s2 from my friend (tmobile version) and I too get stuck in a bootloop no matter what rom I use. It boots up freezes then reboots 7 keeps doing that endelessly. I've even wiped using twrp & darkside then reflashed the stock rom in odin, but no luck. strangely it only happens on the cellular network, otherwise it works fine on wifi. But when I turn off the wifi and go to the cellular network I can't even turn on the wifi anymore and still stuck in this boot loop It's wierd and frustrating.
DennyTek said:
Same here. I just bought a galaxy s2 from my friend (tmobile version) and I too get stuck in a bootloop no matter what rom I use. It boots up freezes then reboots 7 keeps doing that endelessly. I've even wiped using twrp & darkside then reflashed the stock rom in odin, but no luck. strangely it only happens on the cellular network, otherwise it works fine on wifi. But when I turn off the wifi and go to the cellular network I can't even turn on the wifi anymore and still stuck in this boot loop It's wierd and frustrating.
Click to expand...
Click to collapse
Hmm. That's interesting... This is happening on the stock rom - where you turn on cellular data and it reboots? Definitely a different issue than the one I was having. Which stock rom were you flashing via Odin? Have you tried other versions of the stock rom and had the same problem?
TMO 4.1.2
es0tericcha0s said:
Hmm. That's interesting... This is happening on the stock rom - where you turn on cellular data and it reboots? Definitely a different issue than the one I was having. Which stock rom were you flashing via Odin? Have you tried other versions of the stock rom and had the same problem?
Click to expand...
Click to collapse
This was happening on any rom I used (Cm 10.2 stable, Cm 11 nightly, AOKP & Super Nexus 3.0 which is Android 4.3) I can't really speak for the stock rom (tmo 4.1.2) since I've never used it for more that 5 minutes, sigh but I'll try it and see if it gives me the same problem :/
Are you guys flashing gapps if the ROM you're installing doesn't have it?
Sent from my SGH-T989 using Tapatalk
yep
wikitiki said:
Are you guys flashing gapps if the ROM you're installing doesn't have it?
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
ya, well at least I am anyways
wikitiki said:
Are you guys flashing gapps if the ROM you're installing doesn't have it?
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
I had tried with and without and did not make any difference.
DennyTek said:
This was happening on any rom I used (Cm 10.2 stable, Cm 11 nightly, AOKP & Super Nexus 3.0 which is Android 4.3) I can't really speak for the stock rom (tmo 4.1.2) since I've never used it for more that 5 minutes, sigh but I'll try it and see if it gives me the same problem :/
Click to expand...
Click to collapse
I just started working on a VZW S3 on T-Mobile service that has this issue. Happens on stock VZW 4.1.2, stock T-Mobile 4.1.2 rom, custom 4.1.2 T-Mobile rom, and stable CM 10.2. Weirdest thing... full wipes including /system inbetween each flash. Changed the modem too. Nothing helps. Pretty sure it's a bad board at this stage.
Cool beans, 0! Having this exact problem, will try your method for my s2, btw which aosp 4.1.2 did u use? Can I get a link? Thanks been having the problem for a few months now and just gave up haha, been super thirsty for that beanstalk kk build
One last thing can u also provide a link to the 4.3 that u used? I really want it to work and want to follow what u did to the , megabyte
In all my previous posts requesting help of why my phone wont boot 4.4.2 ive never gotten a clear answer or any troubleshooting steps.
when i flash 4.4.2 with any recovery it goes to rom logo and doesnt boot past that. the only rom ive been successful with flashing is omni rom. whats the difrence between omni rom and any other regular 4.4.2 rom/
all i want to do is use carbon kk i had 4.4.2 working once before i flashed 4.3 and the wifi fix and after i flashed the wifi fix my phone stopped booting into 4.4.2 ever since ive been trying to get a odin wifi fix removal for my phone. i want to see if that will fix it but no one will help
also in cwm recovery upon wiping
you get an android_secure not found or somthing like that
zachdees said:
In all my previous posts requesting help of why my phone wont boot 4.4.2 ive never gotten a clear answer or any troubleshooting steps.
when i flash 4.4.2 with any recovery it goes to rom logo and doesnt boot past that. the only rom ive been successful with flashing is omni rom. whats the difrence between omni rom and any other regular 4.4.2 rom/
all i want to do is use carbon kk i had 4.4.2 working once before i flashed 4.3 and the wifi fix and after i flashed the wifi fix my phone stopped booting into 4.4.2 ever since ive been trying to get a odin wifi fix removal for my phone. i want to see if that will fix it but no one will help
also in cwm recovery upon wiping
you get an android_secure not found or somthing like that
Click to expand...
Click to collapse
The android secure issue you see is actually nothing. It is stating it cant find that directory on you sdext partition which you dont have unless you partition your sdcard.
Now why you cant boot 4.4 is kind of odd. I have gone between all versions for our phone aosp and touch wiz without any problems. I would suggest installing twrp and then running billards back to stock mc2 with counter reset (located in development section). Make sure you read the op for that thread and follow his directions. After flashing that before rebooting flash a root.zip (dont use twrp's root). Once your booted you can use odin or an app to flash cwm or philz (6.07.9 recommended) then you can flash any 4.4 you want. Just remember to wipe/format your internal sdcard (data/media) before going to 4.4.
Sent from my SPH-L900 using XDA Premium 4 mobile app
My phone won't let me format the internal sd card it seems like Its locked or something also I've done back to stock 5 times and no luck
Which recovery and how are you trying to format internal?
Sent from my SPH-L900 using XDA Premium 4 mobile app
Do what jlmancuso said. This will format your internal sd as well. Just go back to stock unrooted MC2 and don't bother with flashing the root till its back up and running stock unrooted. Once you do that use the Samsung Note 2 Toolkit (version 2 not 3) and choose the ALL IN ONE Root,recovery, busy box, etc option and choose the twrp recovery not clockwork. Once you get it rooted and on twrp recovery, immediately flash Phil's recovery. 6.07 version (or whichever version that has already been recommended). Then wipe everything as usual including dalvic, cache, internal sd. Then flash stock rooted MK4 in lorjay's thread. then use ODIN on your PC to flash the wifi fix. Do a prl and update profile while on stock rooted MK4. Once you are at this point you can then flash any KK rom and it should work fine. just make sure you set your phone down and let it complete the initial boot as it sometimes takes a few minutes to boot. If this does not work then you're screwed LOL. Good luck.
tx_dbs_tx said:
Do what jlmancuso said. This will format your internal sd as well. Just go back to stock unrooted MC2 and don't bother with flashing the root till its back up and running stock unrooted. Once you do that use the Samsung Note 2 Toolkit (version 2 not 3) and choose the ALL IN ONE Root,recovery, busy box, etc option and choose the twrp recovery not clockwork. Once you get it rooted and on twrp recovery, immediately flash Phil's recovery. 6.07 version (or whichever version that has already been recommended). Then wipe everything as usual including dalvic, cache, internal sd. Then flash stock rooted MK4 in lorjay's thread. then use ODIN on your PC to flash the wifi fix. Do a prl and update profile while on stock rooted MK4. Once you are at this point you can then flash any KK rom and it should work fine. just make sure you set your phone down and let it complete the initial boot as it sometimes takes a few minutes to boot. If this does not work then you're screwed LOL. Good luck.
Click to expand...
Click to collapse
The red additional steps are unnecessary and make little sense. Otherwise, yup.
I'm of the hunch-ish opinion that it is the "wifi fix" that causes lots of these problems in the first place. Most everyone who flashes 4.4.2 builds and that has issues usually share the common thread of having that "wifi fix" on their phone....and that is a hunch, yes, purely on my part. In any case MK4 (radio, ROM, etc) is in no way needed to flash 4.4.2 builds.
I Have done every flash to stock with counter reset. and no matter how many times ive tried it still bootloops i need a DIRECT WIFI FIX REMOVAL
There is no such thing. All the wifi fix is a flash of the param.bin which is in the mk4 odin file. Also those who took the ota have it. It in no way effects aosp!
Are you flashing anything besides the 4.4 rom?
Sent from my SPH-L900 using XDA Premium 4 mobile app
Are you also performing the data wipe and factory reset AFTER FLASHING THE ROM AND GAPPS? Many miss this required step.
Sent from my SPH-L900 using xda app-developers app
thunderwagn said:
Are you also performing the data wipe and factory reset AFTER FLASHING THE ROM AND GAPPS? Many miss this required step.
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
I have never had to do that but it wont hurt to try it.
Sent from my SPH-L900 using XDA Premium 4 mobile app
i have always payed close attention to that step. im almost to the point of selling my phone for the note 3 this journey is almost over
zachdees said:
i have always payed close attention to that step. im almost to the point of selling my phone for the note 3 this journey is almost over
Click to expand...
Click to collapse
That is definitely a good idea...considering that last I knew Note 3 has yet to get working 4.4.2 builds.
Hey everyone,
Greetings from Jamaica!
I've had my e980 OGP for about 2 months now
When I got it, it was running the 10p firmware. After a while, I realized that i'm having random mobile network drops, sometimes I get a good signal, sometimes I don't, sometimes it goes and comes. I was advised to flash a custom rom, I rooted using the VROOT method, installed freegee from the play store and flashed cwm. I then flashed cm11. When I flashed cm11, it worked perfectly! after about 5-10 mins of first-time-use setting up, it froze, then started rebooting, after that it randomly rebooted constantly for the remainder of that day. after trying various custom roms, I decided to flash back to stock, but I flashed the kit kat stock firmware using the Flash Tool and the TOT file. Once v20g was up and running, the reboots stopped, but the signal issues came back, I'm clueless as to what would cause my issue, but I'm confident I can get some answers from the geniuses here, so plz, help a brotha out?
Any help? :fingers-crossed:
YOu could try changing the modem/baseband, there are a few floating around that you could flash.
luisoman2000 said:
YOu could try changing the modem/baseband, there are a few floating around that you could flash.
Click to expand...
Click to collapse
Ok Thanks much. Is there a possible diagnosis for the random reboots in cm11? maybe a custom kernel could fix, or is there a flashable version of the e98020g kernel that I could flash on cm11 to make it... stop rebooting I guess? I'm kinda noob with this phone
blazin876 said:
Ok Thanks much. Is there a possible diagnosis for the random reboots in cm11? maybe a custom kernel could fix, or is there a flashable version of the e98020g kernel that I could flash on cm11 to make it... stop rebooting I guess? I'm kinda noob with this phone
Click to expand...
Click to collapse
Dunno, i don't use AOSP based roms, prefer the stock look.
Any fixes?
I realize that no matter which custom rom I try, I still end up with random reboots. @madmack is there anything that could be done to stop the reboots? I tried flashing that stock kernel you made for kitkat onto PacMan but i'm stuck at the LG Logo. Any help? Please?:crying::crying::crying:
blazin876 said:
I realize that no matter which custom rom I try, I still end up with random reboots. @madmack is there anything that could be done to stop the reboots? I tried flashing that stock kernel you made for kitkat onto PacMan but i'm stuck at the LG Logo. Any help? Please?:crying::crying::crying:
Click to expand...
Click to collapse
Any Ideas?
blazin876 said:
Any Ideas?
Click to expand...
Click to collapse
When you install custom roms, do you make a complete wipe of your system,including factory reset?
blitzkriegger said:
When you install custom roms, do you make a complete wipe of your system,including factory reset?
Click to expand...
Click to collapse
Using CWM, I wipe data/factory reset + Wipe Cache + Wipe Dalvic Cache
Use hacked twrp and make sure you wipe it clean ..completely clean. Install ROM .. Gapps.. And boot up ... Run build m8 or m9 cm.... But I run stock kk due to deep sleep issues for a lot of our Roms... Some get deep sleep and some don't ... But stock kk is where its at for me
2SHAYNEZ
Since day one I had this , well..., phone, I had signal drops to-noservices.
AT&T and rogers, I barely use this phone, since I had it, only problems.
To double-down on what Shayne said, wipe SYSTEM as well, when jumping between AOSP/LG sources or JB and KK. Have you altered preferred network or APN at all? Leaving the defaults delivers the best stability if you're on AT&T. Finally, if you click settings--> mobile data --> menu, there are background data/auto-sync data options buried in there.
Sent from my Nexus 7 using Tapatalk
JCred said:
To double-down on what Shayne said, wipe SYSTEM as well, when jumping between AOSP/LG sources or JB and KK. Have you altered preferred network or APN at all? Leaving the defaults delivers the best stability if you're on AT&T. Finally, if you click settings--> mobile data --> menu, there are background data/auto-sync data options buried in there.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Ok, Thanks for the tips, I just flashed the most recent CM11 release using all the directions I got here so hopefully it works. I'm in Jamaica and so I dont have access to AT&T lol. CM11 gives perfect stability as it relates to mobile network tho...
[EDIT] I still get random reboots, apparently less frequent tho
Not sure what happened, but this is what's going' on. I'm working with SM-T210R / updated to the 4.4.2 - Did not like the issues with Custom Recoveries, so I got into TWRP - Restored my stock rom backup and everything restored fine and as expected. I went to Root the device, using RootJunky's TWRP recovery and root on YouTube (which I've done many times and never had an issue - I'm not a noob, but, still have a lot to learn) Anyways - when you go swipe to reboot the system, TWRP asks you about installing Supersu for Root access, and of course, you go with it. Well, since that swipe - it keeps rebooting into TWRP - I cant get to the system. I used Odin to install Philz and same thing, kept rebooting into Philz. I've tried re-restoring my back up and now it wont .... it acts like it is, but then it keeps throwing me back into the custom recovery being used ... any ideas or help is greatly appreciated!
PS - Thank you to gr8nole and RootJunky - I'm always using your guys' methods and suggestions.
jonstowe78 said:
Not sure what happened, but this is what's going' on. I'm working with SM-T210R / updated to the 4.4.2 - Did not like the issues with Custom Recoveries, so I got into TWRP - Restored my stock rom backup and everything restored fine and as expected. I went to Root the device, using RootJunky's TWRP recovery and root on YouTube (which I've done many times and never had an issue - I'm not a noob, but, still have a lot to learn) Anyways - when you go swipe to reboot the system, TWRP asks you about installing Supersu for Root access, and of course, you go with it. Well, since that swipe - it keeps rebooting into TWRP - I cant get to the system. I used Odin to install Philz and same thing, kept rebooting into Philz. I've tried re-restoring my back up and now it wont .... it acts like it is, but then it keeps throwing me back into the custom recovery being used ... any ideas or help is greatly appreciated!
PS - Thank you to gr8nole and RootJunky - I'm always using your guys' methods and suggestions.
Click to expand...
Click to collapse
Install stock recovery from Odin to get out of recovery bootloop
Sent from my SM-T211 using XDA Free mobile app
sscsps said:
Install stock recovery from Odin to get out of recovery bootloop
Sent from my SM-T211 using XDA Free mobile app
Click to expand...
Click to collapse
ok I will try that now ... I hope youre right!
If you reboot to recovery using any method other than the three button reboot, you'll be stuck in recovery.
Sent from my ATRIX HD using XDA Free mobile app
bmatney said:
If you reboot to recovery using any method other than the three button reboot, you'll be stuck in recovery.
Sent from my ATRIX HD using XDA Free mobile app
Click to expand...
Click to collapse
Well, yeah, that's the reason,
According to gr8nole, bootloader is responsible for this, the updated version of bootloader have this problem
Sent from my SM-T211 using XDA Free mobile app
bmatney said:
If you reboot to recovery using any method other than the three button reboot, you'll be stuck in recovery.
Sent from my ATRIX HD using XDA Free mobile app
Click to expand...
Click to collapse
That's IF you are using the Stock 4.4.2 ... I restored my Stock 4.1.2 before all this started happening ... Regardless, thank you guys for your suggestions, but its all good now. After work I came home and decided to give it one more try, using Odin to put Philz on and go from there, and this time it took. Once I got Philz on, I was able to (again) restore my 4.1.2 stock backup (fix the flickering screen of course) and the get back to Nolekat v1.9 - thank GOD!
jonstowe78 said:
That's IF you are using the Stock 4.4.2 ... I restored my Stock 4.1.2 before all this started happening ... Regardless, thank you guys for your suggestions, but its all good now. After work I came home and decided to give it one more try, using Odin to put Philz on and go from there, and this time it took. Once I got Philz on, I was able to (again) restore my 4.1.2 stock backup (fix the flickering screen of course) and the get back to Nolekat v1.9 - thank GOD!
Click to expand...
Click to collapse
No, it can happen if you are on 4.1.2 too, it happened to me on my SM-T211 while running 4.1.2 and I did used a software method to reboot to recovery and was stuck in recovery bootloop
Sent from my SM-T211 using XDA Free mobile app
jonstowe78 said:
That's IF you are using the Stock 4.4.2 ... I restored my Stock 4.1.2 before all this started happening ... Regardless, thank you guys for your suggestions, but its all good now. After work I came home and decided to give it one more try, using Odin to put Philz on and go from there, and this time it took. Once I got Philz on, I was able to (again) restore my 4.1.2 stock backup (fix the flickering screen of course) and the get back to Nolekat v1.9 - thank GOD!
Click to expand...
Click to collapse
It will happen if you ever updated the firmware once, no matter if you revert back to previous version later
Sent from my SM-T211 using XDA Free mobile app
sscsps said:
It will happen if you ever updated the firmware once, no matter if you revert back to previous version later
Sent from my SM-T211 using XDA Free mobile app
Click to expand...
Click to collapse
Good to know ... GREAT, so since I updated that ONE time, from now on I can NEVER boot into recovery via software? It'll always be the 3B method .... that sucks! lol
jonstowe78 said:
Good to know ... GREAT, so since I updated that ONE time, from now on I can NEVER boot into recovery via software? It'll always be the 3B method .... that sucks! lol
Click to expand...
Click to collapse
Yes
Unless someone makes a fix for that!
Sent from my SM-T211 using XDA Free mobile app
jonstowe78 said:
That's IF you are using the Stock 4.4.2 ... I restored my Stock 4.1.2 before all this started happening ... Regardless, thank you guys for your suggestions, but its all good now. After work I came home and decided to give it one more try, using Odin to put Philz on and go from there, and this time it took. Once I got Philz on, I was able to (again) restore my 4.1.2 stock backup (fix the flickering screen of course) and the get back to Nolekat v1.9 - thank GOD!
Click to expand...
Click to collapse
I've been trying to find a way to downgrade back to 4.1.2 after finding out about kitkat's flaws. After I installed it, I noticed three things:
- NO extSD card permission
- FASTER battery drainage (it takes a whole day to charge it back from 0)
- Games like Temple Run can no longer be played cause tilt sensor malfunctions - accelerometer issues)
The first two are a major let down. If I had known about this prior the upgrade, I would have kept JB 4.1.2.
Now I'm looking for ways to safely downgrade back to Jelly Bean. From what I'd read, people are getting stuck in custom recovery because the kitkat bootloader or whatever is not compatible (or something like that)? Also, those who have successfully managed to get back to JB now have the issue of not being able to charge their sm-t210R unless it's turned ON. So if we fix one issue, we still got the other.
@jonstowe78, are you having any issues with charging while your device is turned off?
I read about flashing Philz custom recovery for sm-t20R, and after a (failed) attempt to root my tab 3 (which put me off from rooting), I know a bit about the 3B method to reboot. I flashed a custom 4.1.2 JB stock rom using Odin and that's how I got rid of the messed up screen that happened after I rooted.
I would LIKE to root to NoleKat, but like I said, one bad experience with rooting, forever leery of it. Unless someone can help me, please?
sscsps said:
Install stock recovery from Odin to get out of recovery bootloop
Sent from my SM-T211 using XDA Free mobile app
Click to expand...
Click to collapse
Ditto that. I got the firmware from sammobile.com & flashed (AP mode in Odin 3.09) and I was no longer stuck. At that point, I had stock 4.4.2. I then flashed phil via Odin 3.09 (AP) - the gr8nole version (check the nolekat thread) and was able to install any ROM I wanted.
Good luck
ameva said:
I've been trying to find a way to downgrade back to 4.1.2 after finding out about kitkat's flaws. After I installed it, I noticed three things:
- NO extSD card permission
- FASTER battery drainage (it takes a whole day to charge it back from 0)
- Games like Temple Run can no longer be played cause tilt sensor malfunctions - accelerometer issues)
The first two are a major let down. If I had known about this prior the upgrade, I would have kept JB 4.1.2.
Now I'm looking for ways to safely downgrade back to Jelly Bean. From what I'd read, people are getting stuck in custom recovery because the kitkat bootloader or whatever is not compatible (or something like that)? Also, those who have successfully managed to get back to JB now have the issue of not being able to charge their sm-t210R unless it's turned ON. So if we fix one issue, we still got the other.
@jonstowe78, are you having any issues with charging while your device is turned off?
I read about flashing Philz custom recovery for sm-t20R, and after a (failed) attempt to root my tab 3 (which put me off from rooting), I know a bit about the 3B method to reboot. I flashed a custom 4.1.2 JB stock rom using Odin and that's how I got rid of the messed up screen that happened after I rooted.
I would LIKE to root to NoleKat, but like I said, one bad experience with rooting, forever leery of it. Unless someone can help me, please?
Click to expand...
Click to collapse
Download stock md5 of 4.1.2 for your country from sammobile.com and flash it from Odin to downgrade to 4.1.2,
For rooting, take a look at this:
http://forum.xda-developers.com/showthread.php?t=2822307
How to root any android device, easy, Noob friendly!
Sent from my SM-T211 using XDA Free mobile app
sscsps said:
Download stock md5 of 4.1.2 for your country from sammobile.com and flash it from Odin to downgrade to 4.1.2,
For rooting, take a look at this:
http://forum.xda-developers.com/showthread.php?t=2822307
How to root any android device, easy, Noob friendly!
Sent from my SM-T211 using XDA Free mobile app
Click to expand...
Click to collapse
Thank you for your feedback!
The truth is, after I made that post, I did a lot of reading on custom recovery like TWRP, Philz Touch, and CWM, and then I read some more about NoleKat v2.0, and how it basically is like KK but it gives you root access and sd card rights back, so now I've decided to not downgrade. I've learned a lot from when I first tried to root (which ended in failure and a dim screen with flickering colors), so I'm more confident in how the process goes.
I was wondering though. If I install custom recovery (from any of those three), will they wipe my data? I know you can back up your data using the custom recovery, but which one do you think is the least likely to have issues with KK bootloader (assuming the custom recovs have all been updated to 'play nicely' with the KK so people won't get stuck in custom recov bootloop?)
ameva said:
Thank you for your feedback!
The truth is, after I made that post, I did a lot of reading on custom recovery like TWRP, Philz Touch, and CWM, and then I read some more about NoleKat v2.0, and how it basically is like KK but it gives you root access and sd card rights back, so now I've decided to not downgrade. I've learned a lot from when I first tried to root (which ended in failure and a dim screen with flickering colors), so I'm more confident in how the process goes.
I was wondering though. If I install custom recovery (from any of those three), will they wipe my data? I know you can back up your data using the custom recovery, but which one do you think is the least likely to have issues with KK bootloader (assuming the custom recovs have all been updated to 'play nicely' with the KK so people won't get stuck in custom recov bootloop?)
Click to expand...
Click to collapse
Gr8nole have updated the recovery for SM-T210 to not stuck in recovery bootloop(it used to happen only and only if you use any software method to enter in to recovery mode) download cwm for SM-T210 and you are good to go,
And none of the recovery will wipe your data, even if you select factory wipe from custom recovery, it will only delete all the installed applications,
And of you flash(install) a recovery, it won't delete any data/app
Sent from my SM-T211 using XDA Free mobile app
@gr8nole Please prepare two PARAM image from JB and KitKat firmware. Try both PARAM on your device, maybe one of it is the solution of this recovery bootloop issue.
To create Odin flashable param:
Code:
tar -H ustar -c param.bin > param.tar
md5sum -t param.tar >> param.tar
mv param.tar param.tar.md5
sscsps said:
Gr8nole have updated the recovery for SM-T210 to not stuck in recovery bootloop(it used to happen only and only if you use any software method to enter in to recovery mode) download cwm for SM-T210 and you are good to go,
And none of the recovery will wipe your data, even if you select factory wipe from custom recovery, it will only delete all the installed applications,
And of you flash(install) a recovery, it won't delete any data/app
Sent from my SM-T211 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks again for your feedback!
Wait, you mean the installed apps that came pre-installed with KK? Because that's what it sounds like if you say that the recovery will not wipe my data like game progress, rss feeds, recordings, etc?
So if that's true, should I still create a backup through the custom recovery?
Would that be called a dirty flash? Or a full wipe?
I've spent nearly this whole day reading through the NoleKat thread from v0.1 to v.2. I can see it's come a long way. Gr8nole is truly an amazing developer! I've seen issues like charging offline, recovery bootloop, boot animation issues fixed as each new update gets better and better.
ameva said:
Thanks again for your feedback!
Wait, you mean the installed apps that came pre-installed with KK? Because that's what it sounds like if you say that the recovery will not wipe my data like game progress, rss feeds, recordings, etc?
So if that's true, should I still create a backup through the custom recovery?
Would that be called a dirty flash? Or a full wipe?
I've spent nearly this whole day reading through the NoleKat thread from v0.1 to v.2. I can see it's come a long way. Gr8nole is truly an amazing developer! I've seen issues like charging offline, recovery bootloop, boot animation issues fixed as each new update gets better and better.
Click to expand...
Click to collapse
No, not the pre-installed apps, but the apps you installed will be uninstalled is you perform a wipe operation from recovery(custom)
It's just a apps wipe, it will leave only personal data like photos, songs, etc.
Sent from my SM-T211 using XDA Free mobile app
Hmm, I guess I'm just going to have to do a dirty flash then, mainly because I have this one game app, and even though it stores my game info in a folder, if I delete the app, I lose my account, and it's huge hassle to get it back.
So just to be clear, dirty flashing is basically no factory wipe/reset at all, right? Then what does the davlik or wiping cache do? I think we're still suppose to do that after flashing custom rom.
ameva said:
Hmm, I guess I'm just going to have to do a dirty flash then, mainly because I have this one game app, and even though it stores my game info in a folder, if I delete the app, I lose my account, and it's huge hassle to get it back.
So just to be clear, dirty flashing is basically no factory wipe/reset at all, right? Then what does the davlik or wiping cache do? I think we're still suppose to do that after flashing custom rom.
Click to expand...
Click to collapse
You can flash it without any risk of anything being deleted, flashing recovery won't delete anything (neither any app)
Cache memory stores dynamic things which helps apps to run smoothly, if you wipe that, your apps will have to make that memory again(when it runs for the first time/first time after you clear cache) to run smoothly in future, but Delvik cache helps android to run smoothly, every rom need different things to run smoothly, so we need to clear previous rom's Delvik cache in order to allow new rom to create is own Delvik cache of its own, this is the reason the first boot takes a bit longer time to compleat because it takes time to write is own Delvik cache, sometimes, different roms' Delvik cache conflicts, so it can be like you get stuck on boot screen, just clear Delvik cache to fix it
Hope it is clear, I might be wrong, but this is what I think it is!
Sent from my SM-T211 using XDA Free mobile app