So I was turning my optimus G back to stock rom. I was installing kdz and it worked, but it turns out that it wasn't for the optimus G. Now when I try to turn my phone on, the led flashes red and turns back off. When I connect it to the computer, QHSUSB_DLOAD comes up. Please help me!!
nobody here can help you. you can send the phone to warranty. tell them it just died. there is no trace.
when you hold vo.l up and vol. down together... appears the download mode?
first try to go to download mode or reset your phone to factory setting. Can it work?
It won't matter what button he's pressing. Qhsusb_dload means it's hardbricked. The easiest way is to send it to warranty. There,they will try 2 solutions: if the mainboard is healthy,it will be jtaged. If the jtag won't work,they will replace the mainboard. Both solutions will not reveal the fact you broke it. Oh,forgot,they could give you a brand new phone too,if the repair is too expensive.
Sent from stock LG E975/smart phones,dumb people.
well, i tried to enter download mode and sadly it doesn't work
i went to warranty and they said it will cost me $290!!!
wow. what did you told them?i hope you didn't tell them you tried to use kdz updater . You should've told them the phone just died . You were away for some time, the battery was empty, you plugged it to charge,but it wouldn't start up.I did this with a galaxy s 2.
Now,you could go to a gsm service for JTAG. it will cost you some money,the average is 30-50$,depending the country. Of course,if the mainboard is still healthy. if not,well....basically the mainboard means the whole phone. there are few things that can be detached from it(antenna with buzzer, the camera, the volume flex,the charging port,the 3.5mm jack port).
Not to mention the eventual replace can only be done in an official LG service, because the imei must be rewritten(it can be done in a gsm service,with the jtag too).
My advice is to look for an optimus G with broken display,to take the mainboard from it.
thejl1999 said:
well, i tried to enter download mode and sadly it doesn't work
i went to warranty and they said it will cost me $290!!!
Click to expand...
Click to collapse
Tha hell.. what did you flashed, a nuclearbomb
How did u end up flashing a kdz that's not for ur phone model? Definitely hardbricked
Don't want to turn into a flame war,but this kind of things happen when you don't read before. What's done it's done,hope he learned from this. Now let's help him solve the issue.
Sent from stock LG E975/smart phones,dumb people.
Hmm seems jtag is only soulution... here in my place there's a shop that could fix qhusb but not 100%.. maybe try and search u can find solution
Sent from my LG-F180K using Tapatalk
Related
i tried to flash kernel a few hours ago, and now, i can't turn on my phone, no charge, no download mode, i think it was hard brick. and it requires qhusb_dload driver when i connect to laptop, who can't help me to unbrick it, sorry for my english, ii'm vietnamese......
Yes,for sure you are hard bricked.you can send it to warranty,they can't trace any modifications you made. You could tell them you went away for a couple of days,the battery died and when you wanted to charge it,the pgone wouldn't start. Believe me,they can't prove otherwise.Just remember what have you tried to do and DO NOT TRY IT AGAIN when you'll have the phone back.
Sent from LG E975 pwd by CM 10.1
kimitza said:
Yes,for sure you are hard bricked.you can send it to warranty,they can't trace any modifications you made. You could tell them you went away for a couple of days,the battery died and when you wanted to charge it,the pgone wouldn't start. Believe me,they can't prove otherwise.Just remember what have you tried to do and DO NOT TRY IT AGAIN when you'll have the phone back.
Sent from LG E975 pwd by CM 10.1
Click to expand...
Click to collapse
Experience talking? xD
Not with this phone, but i had my share of hard bricks .Remember Samsung's SOD/SDS with S3 and wipe bug with S2 and S3 on 4.0?.
Yesterday I manage to hard-brick my Optimus G (intl) E975. :crying:
The process was quite simple, root, unlock bootloader, flash CyanogenMod, flash custom kernel F93, install FauxClock (paid version on Google Play). In this app (FauxClock), in the screen gamma settings you have an option to download a kernel enhancer. I downloaded the kernel enhancer provided in the app and its name was something like "all_kernels_enhancements_mako.zip". After download, I booted in recovery and flashed that "all kernels enhancement" .... and hard bricked it was!
The phone now won't start and all it does is to blink an Red Led (of death). I can't go intro recovery with any button combination. Only the red led. I hopped that it lacks battery juice and I put it overnight for charging but no change.
It looks like the zip was meant for the Mako (Nexus 4) kernels, not for L975
I searched on the web how to re-write phone's boot images and I found that there is a JTAG method for that using a device called RIFF. It implies that you open your phone and connect some plugs and re-write the nand flash. I searched some more and I found a guy in my town that does this kind of things. I met that guy and, for now, it seems that the re-write process is available only for the e970, e971, e973 variants of the phone, but he will try it on e975 anyways.
Right now I'm waiting some news for this guy. Keep my fingers crossed.
Update 1:
That guy with the JTAG has a hard time making my phone to boot.
Meanwhile I contacted LG service and they told me that they can try to fix it but there is a chance that the mainboard has to be replaced(?) as the phone is not recognized by the computer. They also told me that hard-bricking can appear even when flashing official firmwares.
As I am in a big hurry with this repairing stuff I don't know what to do.
Update 2:
In the end, after 8 hours of hard working, that guy made the best finding the right file to flash with some international help, made the right JTAG shouldering and finally, IT'S ALIVE!
My dear phone is now up and running. I just rooted it, unlocked it and flashed CM 10.1 again with the F93 kernel. Fortunately I made a backup 5 days ago so I lost almost nothing.
It was a good lesson and a first in Romania
goodmamba said:
Yesterday I manage to hard-brick my Optimus G (intl) E975. :crying:
The process was quite simple, root, unlock bootloader, flash CyanogenMod, flash custom kernel F93, install FauxClock (paid version on Google Play). In this app (FauxClock), in the screen gamma settings you have an option to download a kernel enhancer. I downloaded the kernel enhancer provided in the app and its name was something like "all_kernels_enhancements_mako.zip". After download, I booted in recovery and flashed that "all kernels enhancement" .... and hard bricked it was!
The phone now won't start and all it does is to blink an Red Led (of death). I can't go intro recovery with any button combination. Only the red led. I hopped that it lacks battery juice and I put it overnight for charging but no change.
It looks like the zip was meant for the Mako (Nexus 4) kernels, not for L975
I searched on the web how to re-write phone's boot images and I found that there is a JTAG method for that using a device called RIFF. It implies that you open your phone and connect some plugs and re-write the nand flash. I searched some more and I found a guy in my town that does this kind of things. I met that guy and, for now, it seems that the re-write process is available only for the e970, e971, e973 variants of the phone, but he will try it on e975 anyways.
Right now I'm waiting some news for this guy. Keep my fingers crossed.
Click to expand...
Click to collapse
I don't have much experience but i have understood that JTAG is compatible with all the android smartphones, even there's a video in youtube explaining the process. I hope that works for you mate, I have my E977 hard bricked too but I'll take to SAT in a few hours. Good luck :highfive:
This is the video http://www.youtube.com/watch?v=5NRXhJxbtYY
Unreal_Shogo said:
I don't have much experience but i have understood that JTAG is compatible with all the android smartphones, even there's a video in youtube explaining the process. I hope that works for you mate, I have my E977 hard bricked too but I'll take to SAT in a few hours. Good luck :highfive:
This is the video http://www.youtube.com/watch?v=5NRXhJxbtYY
Click to expand...
Click to collapse
Thanks Unreal_Shogo,
I saw that movie yesterday and this is how I found out that there is a solution for my problem.
A few notes on hard bricked LG E975 in general:
- after a phone is bricked, don't try anymore to charge it, because it will only consume the rest of the battery. The phone after that many hours of charging it had only 3 volts instead of 3.7 minimum. Android phones control the charging process by software, not hardware. And if you push the power or you will connect the phone to the charger it will consume completely the battery and you can't stop it if you can't disassembly the phone and disconnect the battery
- this model, compared with e970, e971, e973, it is different and harder to solder the wires, because the JTAG connections are on the other said of the board, not like the one from the video.
- the boot it is not compatible with the other models and it is very hard to find the correct files. But with some stubbornness there is nothing you can't do
Not all the androids can be repaired with JTAG because the manufacturer sometimes disable it. So never be so confident, that you can repaire the phone with a few bucks and no need to replace the mainboard. For example Motorola had only 2 or 3 models witch can be repaired.
And finally I am glad that you already customized your phone like before you bricked the phone and you came to me.
Sent from my GT-I9300 using Tapatalk 2
Thank you ZiDanRO, you made the impossible, possible
Unbrick Optimus G E975 - restore backup files possible?
goodmamba said:
Thank you ZiDanRO, you made the impossible, possible
Click to expand...
Click to collapse
Hello all,
I bicked my E975 using FreeGee app. I tried to unlock it and it gave me a error message. Than I tried to restore backup and I get error message, again. The next thing I did, reboot the phone. After reboot, phone did not power on.
I have all backup files (.img files includes m9kefs, aboot, boot, recovery, sbl... etc) and I need to find a way to restore it.
When I connect phone to PC, it detect it as QDLoader device.
When I plug-in USB, charging led powers up for 3 seconds and goes off. At the same time I can hear windows sound (plug-in and plug-out USB sound). I have downloaded KDZ image and KDZ updater but it did not detect my phone.
I gave phone to friend of mine, he have riff box. He tried to resurect it but riff did not detect (as he said) the phone. sound like a impossible. What do you think?
Can someone help me with this, please.
Sorry for my bad english :/
Zidan made it clear,not everybody knows how to fix it. yeah,your phone is hard bricked.
You have 2 choices : send it to zidanro or to warranty.but i'm sure the warranty is void.
kimitza said:
Zidan made it clear,not everybody knows how to fix it. yeah,your phone is hard bricked.
You have 2 choices : send it to zidanro or to warranty.but i'm sure the warranty is void.
Click to expand...
Click to collapse
Quoting my private message to marko_s for everyone's benefit:
Take it to a cell/mobile service shop and JTAG the phone. It means that your phone will be open, some wires soldered on the chipset and the propper files re-flashed on the phone using a special software.
JTAG soldering
Hello,
thank You for respond. I send it to ONE service guy, friend of mine, and he connected it to riff box. Riff did not detect the phone.
I'm only asking if there is another schematics/a tip to connect it to riff in proper way to get it work.
Also, what is possibility that there is something wrong with riff and or way that connects to phone and can not detect it?
I think can phone be bricked so hard that riff can not help in this situation. ?
It is not burned in fire. PC detect it. So I think that there is something wrong with procedure he used to connect it and "flash" NAND chip.
Let me know if you have any suggestions. Phone is out of warranty, it's opened and soldered.
Thank you guys!
Hi, youre a lucky boy
Haha, you can install a mako rom, without brick, it will boot!
belive me!
(issues are no radio (2g, 3g etc..) , invent volume button, camera (not testet
i think combination e975 kernel and mako patch was bad idea
Nice joke
Hehehe, nice joke.
I must fix it or throw it in the trash. I do not have to buy Monalisa, I can hang it on the wall instead.
Can you tell me where JTAG pins are located? Under the board or on the top? I'm not asking for schematic.
I removed the cover and battery connector. I can not see any soldering pins and solder traces. I did not remove the board.
Help is really needed and appreciated
Thanks!
Wow.so you really wanna make a decorative object).look on youtube,there is a guy jtaging an e970. As zidan said,on e975 the jtag pins are located on the oposite side.
Sent from Asylum via LG E975/smart phones,dumb people.
LG optimus G e975
Hey guys i was wondering does the Jig method work? ive been trying to use it but so far no luck, and also i think my battery is completely dead its been sitting for 2 weeks while waiting to get money to repair the thing.I am in ro as well but in TM and ive checked every were non of the shops around here have any equipment to fix a hard bricked phone. got any advice? if i send it out to Bucharest how much would it cost me to get it un bricked.
Unbricked using JTAG
DanROBO said:
Hey guys i was wondering does the Jig method work? ive been trying to use it but so far no luck, and also i think my battery is completely dead its been sitting for 2 weeks while waiting to get money to repair the thing.I am in ro as well but in TM and ive checked every were non of the shops around here have any equipment to fix a hard bricked phone. got any advice? if i send it out to Bucharest how much would it cost me to get it un bricked.
Click to expand...
Click to collapse
I sent my to one service technician and he repaired my phone using RIFF. He had to remove JTAG connector. It is well done. I can not notice that it was there at all . I pay 25 EU for repair. It's not big money for that kind of repair.
What I will do, when I find a time to do so,. I will backup my phone using QPST and post files here on forum.
I have to put my phone in some kind of recovery mode and so on. I have no time for that, at the moment. I think it should work/help to repair your device(s).
Regards!
u sayed battery is dead?! try to open the phone and disconnect the battery (2 screws) and connect agayn and try.... for me it worked after my phone got very hot.. (nothing helped...)
marko_s said:
I sent my to one service technician and he repaired my phone using RIFF. He had to remove JTAG connector. It is well done. I can not notice that it was there at all . I pay 25 EU for repair. It's not big money for that kind of repair.
What I will do, when I find a time to do so,. I will backup my phone using QPST and post files here on forum.
I have to put my phone in some kind of recovery mode and so on. I have no time for that, at the moment. I think it should work/help to repair your device(s).
Regards!
Click to expand...
Click to collapse
Can i have te information for the technician you used? And was it in romania?
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
---------- Post added at 04:54 PM ---------- Previous post was at 04:48 PM ----------
2nd Sky said:
u sayed battery is dead?! try to open the phone and disconnect the battery (2 screws) and connect agayn and try.... for me it worked after my phone got very hot.. (nothing helped...)
Click to expand...
Click to collapse
I tried that no luck :'(
DanROBO said:
Can i have te information for the technician you used? And was it in romania?
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
---------- Post added at 04:54 PM ---------- Previous post was at 04:48 PM ----------
I tried that no luck :'(
Click to expand...
Click to collapse
Technician is from Bosnia And Herzegovina, city Zenica. He is precise in his work, as I saw.
I'm electronic engineer, but he is more than that . Last option would be to send your phone to him to repair it. :/
Contact me over pm for details. I could manage that for you.
Maybe i can help you
goodmamba said:
Yesterday I manage to hard-brick my Optimus G (intl) E975. :crying:
The process was quite simple, root, unlock bootloader, flash CyanogenMod, flash custom kernel F93, install FauxClock (paid version on Google Play). In this app (FauxClock), in the screen gamma settings you have an option to download a kernel enhancer. I downloaded the kernel enhancer provided in the app and its name was something like "all_kernels_enhancements_mako.zip". After download, I booted in recovery and flashed that "all kernels enhancement" .... and hard bricked it was!
The phone now won't start and all it does is to blink an Red Led (of death). I can't go intro recovery with any button combination. Only the red led. I hopped that it lacks battery juice and I put it overnight for charging but no change.
It looks like the zip was meant for the Mako (Nexus 4) kernels, not for L975
I searched on the web how to re-write phone's boot images and I found that there is a JTAG method for that using a device called RIFF. It implies that you open your phone and connect some plugs and re-write the nand flash. I searched some more and I found a guy in my town that does this kind of things. I met that guy and, for now, it seems that the re-write process is available only for the e970, e971, e973 variants of the phone, but he will try it on e975 anyways.
Right now I'm waiting some news for this guy. Keep my fingers crossed.
Update 1:
That guy with the JTAG has a hard time making my phone to boot.
Meanwhile I contacted LG service and they told me that they can try to fix it but there is a chance that the mainboard has to be replaced(?) as the phone is not recognized by the computer. They also told me that hard-bricking can appear even when flashing official firmwares.
As I am in a big hurry with this repairing stuff I don't know what to do.
Update 2:
In the end, after 8 hours of hard working, that guy made the best finding the right file to flash with some international help, made the right JTAG shouldering and finally, IT'S ALIVE!
My dear phone is now up and running. I just rooted it, unlocked it and flashed CM 10.1 again with the F93 kernel. Fortunately I made a backup 5 days ago so I lost almost nothing.
It was a good lesson and a first in Romania
Click to expand...
Click to collapse
Today i also managed to hard brick my phone. There was not a single notification that my phone is alive. I too found that QHSUSB at device manager.
But try one thing - 1) Plug it to wall charger for near about 15 mins. 2) Then Press Both vol buttons And then the power button too
( I tried Vol+ then Vol- and lastly power button ) Hold them all.
3) and when it shows charging screen keep pressing vol up button 1 time / sec.
You may not get succed for the very first time.
Try at least 4-5 Times.
Hit thanks If it Works :laugh: :good:
marko_s said:
Technician is from Bosnia And Herzegovina, city Zenica. He is precise in his work, as I saw.
I'm electronic engineer, but he is more than that . Last option would be to send your phone to him to repair it. :/
Contact me over pm for details. I could manage that for you.
Click to expand...
Click to collapse
Saw posts something like that in other forums. Some never saw their phones back. Hope this is not the case here and there is no attention to do so
I bricked my phone too, and jtag helped
By mistake i flashed nexus 4 kernel to my og and hard bricked my phone. I went to local shop repairer and they opened the back of the phone and connect many wires to the board and connect it to pc.They did something in their pc(something in cmd, don't know exactly) and they said that software installation process went till 71% and the phone switched off because of low battery.Is this really possible without JTAG? or they telling lies?
That is in fact JTAG Riff. They open the phone and connect some wires to the back of the phone and transfer the needed files to bring back the phone to life.
shirish893 said:
By mistake i flashed nexus 4 kernel to my og and hard bricked my phone. I went to local shop repairer and they opened the back of the phone and connect many wires to the board and connect it to pc.They did something in their pc(something in cmd, don't know exactly) and they said that software installation process went till 71% and the phone switched off because of low battery.Is this really possible without JTAG? or they telling lies?
Click to expand...
Click to collapse
What do you think JTAGing is?
ITzRicardo94 said:
That is in fact JTAG Riff. They open the phone and connect some wires to the back of the phone and transfer the needed files to bring back the phone to life.
Click to expand...
Click to collapse
so u think that is JTAG?
Duo8 said:
What do you think JTAGing is?
Click to expand...
Click to collapse
i dunno xD
i asked them whether they have JTAG or not. They replied they dont have :v
shirish893 said:
i dunno xD
i asked them whether they have JTAG or not. They replied they dont have :v
Click to expand...
Click to collapse
That is jtag... Probably thy don't knw the name for this procedure...
Sent from my LG-E975 powering Stock 4.4.2 & SOLID Kernel
This is how JTAg-ing is done on Optimus G.
http://www.youtube.com/watch?v=5NRXhJxbtYY
Hi all, ok tonight/this morning at work while on my break i went to do my usual thing of having food and watching a tv show via cartoon hd about 2mins in and my phone switched off.....now i thought it was dead so plugged in the charger but no led light, or screen on to say its charging.....i did a bit of googling and find out about the bootloop thingy buuuuut mines not looping, its swtiching on to the LG logo [i did the bootloader unlocker thingy etc so it says tha in the top corner] then it goes off.......i also get pulsing blue led lights too.....if i press, hold the power button after i get nothing, i have to take the battery out and then its rinse and repeat
Hi,
Same thing happened to me today. I was taking a shot and it switched off and same scenario.It seems that we had encountered an bootloader brick in which our device enters in some special bootloader mode in which when you connect it to the computer in the device manager it shows up as Qhsusb_bulk. I read the whole internet and there is a similar brick with G3 the guys were able to fix it. Even there is a tutorial on how to do this which I think is applicable to our device. I was able to install the required drivers and etc. but there is one big problem - I followed the guide and came into one serious problem - we need a special mbn file so we can recover our device and the sad thing is nobody on the internet doesn't have it still. There are many people like us who got selfbricked G4 and cannot fix it without this file. Please if somebody can help us please share the file so we can fix our devices. THANK YOU !
Link to the g3 unbrick guide
ive seen lots about the bootloop issue, but the thing is mine isnt doing a loop [i have to take the battery out/ pop it it back in, to switch it on then after 10-20 seconds on the LOGO it turns off
thewhisper said:
Hi,
Same thing happened to me today. I was taking a shot and it switched off and same scenario.It seems that we had encountered an bootloader brick in which our device enters in some special bootloader mode in which when you connect it to the computer in the device manager it shows up as Qhsusb_bulk. I read the whole internet and there is a similar brick with G3 the guys were able to fix it. Even there is a tutorial on how to do this which I think is applicable to our device. I was able to install the required drivers and etc. but there is one big problem - I followed the guide and came into one serious problem - we need a special mbn file so we can recover our device and the sad thing is nobody on the internet doesn't have it still. There are many people like us who got selfbricked G4 and cannot fix it without this file. Please if somebody can help us please share the file so we can fix our devices. THANK YOU !
Link to the g3 unbrick guide
Click to expand...
Click to collapse
on G2 you get security boot error phone is detected as QHUSb_BULK. on G2 the fix was to enter download mode. in G2 vol up then plug usb.
using TOT method and flash tools . flash stock firmware fixed my soft brick.
not sure about the file you mention, maybe you do need it..
jamious-daywalker said:
now i thought it was dead so plugged in the charger but no led light, or screen on to say its charging.....i did a bit of googling and find out about the bootloop thingy buuuuut mines not looping, its swtiching on to the LG logo [i did the bootloader unlocker thingy etc so it says tha in the top corner] then it goes off.......i also get pulsing blue led lights too.....if i press, hold the power button after i get nothing, i have to take the battery out and then its rinse and repeat
Click to expand...
Click to collapse
I have the issue. I don't do anything special but my phone reboot and stuck on lg logo. But now my phone doesn't want to boot. Sometimes he detect when I'm trying to charge it but often not. Yesterday I boot on download mode and recovery but today it's impossible... I think I have some hardware issue ? Or software with the bootloader...
I don't know how to fix that without access to download/recovery mode :crying:
Same here. Sometimes it boots into recovery/download but most of the times it doesn't. It's a hardware problem I think as LG officially confirmed that there were problems during the building proccess of the first G4 series. I don't want to sound bad but soon or later all phones built before october last year will get into bootloop. I was hoping it won't happen to me - I'm very light user with only light standart apps with no games and other heavy stuff, so the problem wasn't caused by overheating by heavy multitasking. Anyway it happened and I'm pretty sure it's harware related but if somebody can provide the tot and mbn files I will be more than happy to try the g2/g3 unbrick method. The main problem is that these files are not available for h815. I found on other forum tot files for other variants than h815 So if somebody have the tot filesfor h815 please share so we can try to unbrick our G4. Thanks!
same thing heppened to my g4 this week. i called lg last night and they agreed to repair it. i'd just gave them a call.
I sent mine for repair today. I hope they will agree to repare it even that it's with unlocked bootloader and with rooted custom rom !!! What you think ? Will I have problems with them because of that ?
Happened with my phone as well. It was rooted so i was hella scared if they didn't accept my phone. But soon they told me phone's motherboard has gone bad and will be replaced. Got my phone with a brand new motherboard after a couple of hours.
P.s. all your data will be gone
Sent from my LG-H818 using XDA-Developers mobile app
clotveins said:
Happened with my phone as well. It was rooted so i was hella scared if they didn't accept my phone. But soon they told me phone's motherboard has gone bad and will be replaced. Got my phone with a brand new motherboard after a couple of hours.
P.s. all your data will be gone
Sent from my LG-H818 using XDA-Developers mobile app
Click to expand...
Click to collapse
So the same problem just happened to my lg H815 with unlocked bootloader, am really f***ed without my phone, gonna call LG UK tomorrow, anything in particular I should say? also looking for solutions I saw many people are starting to have this issue now too - any official comments from LG?
P.S. if you have an LG G4 you should start backing up all your data now
This literally just happened in the last 15 minutes to me as well. Random reboot right after I woke up the phone and now stuck on the LG splash screen. Light user here, never did anything with the phone that would have heavily stressed it physically or computing-wise, so I also concur it's an inevitability for earlier runs of G4 phones.
Luckily, I backed up everything through TWRP last Thursday by chance because I was updating Xposed to the latest version and swapping to a faster 128GB microSDXC. At worst, I might have lost a handful of unimportant text messages.
Not worth the time to try to figure out any cheap fixes myself, I just got done submitting a repair request to LG.
I ordered LG G4 H815 and I hope to not see any kind of these issues
irishlad99 said:
So the same problem just happened to my lg H815 with unlocked bootloader, am really f***ed without my phone, gonna call LG UK tomorrow, anything in particular I should say? also looking for solutions I saw many people are starting to have this issue now too - any official comments from LG?
P.S. if you have an LG G4 you should start backing up all your data now
Click to expand...
Click to collapse
Guy at service center said its internally communicated all LG G4's motherboard will have to be changed at least once.
And just say you dont know what happened exactly. Slept and in the morning my phone won't work
clotveins said:
Guy at service center said its internally communicated all LG G4's motherboard will have to be changed at least once.
And just say you dont know what happened exactly. Slept and in the morning my phone won't work
Click to expand...
Click to collapse
at least once?? many had sent phone , then again having bootloop after repair..???
raptorddd said:
at least once?? many had sent phone , then again having bootloop after repair..???
Click to expand...
Click to collapse
I have got my phone repaired for like 4-5 times. 3 times motherboard change, 1 time display change and 1 time volume button pannel change.
clotveins said:
I have got my phone repaired for like 4-5 times. 3 times motherboard change, 1 time display change and 1 time volume button pannel change.
Click to expand...
Click to collapse
all under warranty?? not counting display? or did you get dead pixel?
raptorddd said:
all under warranty?? not counting display? or did you get dead pixel?
Click to expand...
Click to collapse
Yup. All under warranty and counting display replacement as well. No dead pixels as well and phone was rooted once during motherboard replacement
Sent from my LG-H818 using XDA-Developers mobile app
Hi folks,
I own a LG G4 AT&T version. Today, after charging to to 100%, I'd been using it normally, texting my friend. After taping the send button, I placed my G4 nearby and continued doing other stuff. & after sometime when I picked it up and double tapped the screen, it just didn't responded.
I pressed back button, I tried plugging charging cable to see whether LED is working or not, that was not working. I pushed out the battery and then put it back and tried turning on again and nothing happened at all. Its like still. Not responding at all. I tried the volume and power button combinations, tried hard reset, even tried connecting to PC and LG UP was unable to recognize, though it has all the necessary drivers installed.
I'm stuck badly, it was my daily driver, no warranty or official support in Pakistan, unfortunately.
is there any way at all to get it working or I should digest the bitter fact that its no more and move on?
Thanks.
Exact same thing happened to my wife's today... I'm at a loss. Still googling and searching this site.
Some reports of the ilapo bootloop have been the same. No nothin ded phones. In pc does it say unreconized.device or nothin at all or anything
420SYN said:
Exact same thing happened to my wife's today... I'm at a loss. Still googling and searching this site.
Click to expand...
Click to collapse
Sad to know, I, myself is at lost. Helpless.
TheMadScientist420 said:
Some reports of the ilapo bootloop have been the same. No nothin ded phones. In pc does it say unreconized.device or nothin at all or anything
Click to expand...
Click to collapse
Connected to PC, PC does not say anything at all. As if device was never connected.
any other expert who can look into and can help us? any one ?
saaqibameen said:
any other expert who can look into and can help us? any one ?
Click to expand...
Click to collapse
Apke device bricked ha take it technician motherboard replace hoga karcha 20000 tak hota ha iska
jinderation said:
Apke device bricked ha take it technician motherboard replace hoga karcha 20000 tak hota ha iska
Click to expand...
Click to collapse
seriously? in 20k, one can get a used LG G4. That's a huge loss
saaqibameen said:
seriously? in 20k, one can get a used LG G4. That's a huge loss
Click to expand...
Click to collapse
Repaired n refurbished set Korean models only for 20k good condition factory stock cost aroud 24 international 25k ...take it technician see what he says
It does sound like a bootloop issue. Mine packed up last week and it is now on the way to LG repair centre here in UK. I was taking photos and put my phone into the pocket and when i took out I couldn't even turn it on. The phone was totally dead. However taking the battery out, putting it back in and trying to start the phone for numerous times it did eventually get into booting but of course it never goes past it due to motherboard failure. Try connecting to the charger and leave it for some time and maybe you'll get to boot screen but one thing for sure is that you can say all your data goodbye no matter how sad it is and LG bastards do not take any responsibility for it apart from replacing motherboard if it is within warranty.