Sorry I didn't see I was in a wrong forum
zethanas said:
Hello guys. I flashed hyperdroid 7 androidmeda then been with it for a year till I decided to flashed to Cyanogenmod 10.2 yesterday but some problem popped up. My GS2 can't find any signal, IMEI disappeared from "About phone". I tried many ways to solve it but all had failed so I flashed again with 4.0.4 base rom (I9100DXLPF - Thailand) successfully and planning to flash it to ERobot version 24(android 4.0.4) since it's quite popular in my country and that leads to my question
1. Since I flashed 4.0.4 base rom does that mean my device got unrooted?
2. If it's unrooted then should i flash Siyah kernel 5.0.1 to get it root again?
3. Does Siyah kernel already has CWM? or do I have to flash CWM in later?
4. In the case that ERobot rom can't function like I expect it to and I might want to go back to hyperdroid 7 which has android version 2.3.6 can I just use "install zip from SDCard in CWM" because at the time I should have CWM in already and with Siyah kernel.
Thank you in advance
Click to expand...
Click to collapse
WRONG FORUM
This is N2 forum and not S2!
I have a rooted n5110 4.2.2 note 8.0
first of all I'm not a noob. However I have been spoiled. Up till nowi have had Motorola decices that have great apps like rom manager and team black hat leaks to help you decide what roms to flash.
I'm at a loss when it comes to all the options in this forum. I see some roms based on 4.2.2; 4.3 and isn't CM 11.0 based on 4.4? If I flash a 4.3 rom and dont like it cani flash a 4.2 rom or restore a backup to get 4.2.2 back? That was a big no no wirh moto devices. Once you upgraded you had to stay less you got a hold of the spf file.
Ive looked into both PAC rom and CM rom: the stable and nightly versions of both. I know nightlies may be unstable so I would stay away from them less it is easy to flash back to a 4.2.2 stable release. And downloaded the right gapps package. Why cant developers just included that in the roms?
So a bit of help please. What are the differences between the 4.2.2; 4.3 and is CM 11 based on 4.0?
I also use twrp as a recovery but have used cwm in the past. I habe both onmy sdcard in case of trouble.
any help or advice would be appreciated.
Thanks
Come on....anybody?
Sent from my GT-N5110 using xda app-developers app
Hi there! I tried to find something about it but o didn't find...
I'm actually with the CWM 6.0.1 and I want to update it to 6.0.4.5 to flash some new ROMS. Can someone help me?
eijigen said:
Hi there! I tried to find something about it but o didn't find...
I'm actually with the CWM 6.0.1 and I want to update it to 6.0.4.5 to flash some new ROMS. Can someone help me?
Click to expand...
Click to collapse
Try this app.
I tried this one but it says that my device is not compatible...
I am actually with a Xperia Acro S, running CM 10. I want to flash the CM 11 but as my CWM is outdated i keep receiving the status 7 error
I have a sprint galaxy s3 SPHL710PUDND8 and cannot get any of them to install it and I went rummaging through the installer scripts and realized they worked for every model but mine. I added my phone model to the list (I know maybe not the best idea) and it aborted the installation and refused to do anything. So my question is, is there anything else I can do to the Rom I currently have to get it to work or is there a specific version of CM I need to get? I am currently updated to the latest 4.4.2 KitKat firmware from sprint and have Clockworkmod Touch 6.0.4.5 installed.
https://download.cyanogenmod.org/?device=d2lte
I would suggest the Snapshot M12 as that will be the most stable over the nightlies.
Thanks but I am currently using the latest nightly. I saw this already on YouTube an hour after I posted this. But thanks anyway. I'll leave this up for anyone else who may have this problem.
Facing wifi problem on every custom rom I installed on my LG optimus G pro..
Working perfect on stock based roms.. Anybody know whats the issue ? Using cwm 6..0.4.7 and new phillz touch recovery to install roms but facing same problem.. When phone take first boot after installation the wifi is working but after some hours or next reboot the wifi will no more working.. Found something in build.prop
ro.wifi,channels= "blank"
I put some values of channel in it but it wont work
Plz help me..
Sorry for bad english
zohaibkhan143 said:
Facing wifi problem on every custom rom I installed on my LG optimus G pro..
Working perfect on stock based roms.. Anybody know whats the issue ? Using cwm 6..0.4.7 and new phillz touch recovery to install roms but facing same problem.. When phone take first boot after installation the wifi is working but after some hours or next reboot the wifi will no more working.. Found something in build.prop
ro.wifi,channels= "blank"
I put some values of channel in it but it wont work
Plz help me..
Sorry for bad english
Click to expand...
Click to collapse
It's not unusual for that entry in the build.prop to be blank, and shouldn't cause issues. I think the default there should be '11 11', though having it blank should be fine (pretty certain).
> Working perfect on stock based rom
Which roms are you flashing that are giving you problems? Many of the e980 roms are bugged out in various ways, maybe it's just a quirk of the one(s) you flashed? I had a similar problem recently, wifi just would *not* stay enabled, would not behave. I don't remember which rom it was though; I flash too much.
You've flashed the Kitkat 20g modem, yes? If all else flails, you could always flash back to Kitkat stock and start over, that's guaranteed to tell you whether its a hardware or software problem (if it persists after that: hardward, got to be).
help
culot said:
It's not unusual for that entry in the build.prop to be blank, and shouldn't cause issues. I think the default there should be '11 11', though having it blank should be fine (pretty certain).
> Working perfect on stock based rom
Which roms are you flashing that are giving you problems? Many of the e980 roms are bugged out in various ways, maybe it's just a quirk of the one(s) you flashed? I had a similar problem recently, wifi just would *not* stay enabled, would not behave. I don't remember which rom it was though; I flash too much.
You've flashed the Kitkat 20g modem, yes? If all else flails, you could always flash back to Kitkat stock and start over, that's guaranteed to tell you whether its a hardware or software problem (if it persists after that: hardward, got to be).
Click to expand...
Click to collapse
thanks for reply
I installed cm11 cm12 blisspop v1.0 1.1 .12 1.3 all these roms got same problem that is wifi
I m on JB 4.1.2 stock e98010p a&t
there is no wifi bugs in these custon roms.. only me facing this issue in every custom rom... Can u give me the kitkat firmware link e98020g ? I m gonna flash that rom then I will root my device on KK then I will try to flash custom roms and tell you about results.. thanks
plz provide link..
sorry for bad english
zohaibkhan143 said:
thanks for reply
I installed cm11 cm12 blisspop v1.0 1.1 .12 1.3 all these roms got same problem that is wifi
I m on JB 4.1.2 stock e98010p a&t
there is no wifi bugs in these custon roms.. only me facing this issue in every custom rom... Can u give me the kitkat firmware link e98020g ? I m gonna flash that rom then I will root my device on KK then I will try to flash custom roms and tell you about results.. thanks
plz provide link..
sorry for bad english
Click to expand...
Click to collapse
Booyah: E980 20g Kitkat TOT.
Also, with Lollipop roms, I don't think any of them are totally stable or functionally 100% yet, so that's not a place to go if you want stuff to work. There's plenty of nice Kitkat roms like PAC-rom or Carbon-Rom is you want stability and want for your phone to work fully (but thats no fun! ).
help
culot said:
Booyah: E980 20g Kitkat TOT.
Also, with Lollipop roms, I don't think any of them are totally stable or functionally 100% yet, so that's not a place to go if you want stuff to work. There's plenty of nice Kitkat roms like PAC-rom or Carbon-Rom is you want stability and want for your phone to work fully (but thats no fun! ).
Click to expand...
Click to collapse
Ok bro thanks for helping me
zohaibkhan143 said:
Ok bro thanks for helping me
Click to expand...
Click to collapse
bro I installed stock Kk and root my device but I unable to install cusom recovery using freegee app.. Any other way to install custom recovery ?
culot said:
Booyah: E980 20g Kitkat TOT.
Also, with Lollipop roms, I don't think any of them are totally stable or functionally 100% yet, so that's not a place to go if you want stuff to work. There's plenty of nice Kitkat roms like PAC-rom or Carbon-Rom is you want stability and want for your phone to work fully (but thats no fun! ).
Click to expand...
Click to collapse
bro I installed stock Kk and root my device but I unable to install cusom recovery using freegee app.. Any other way to install custom recovery ?
zohaibkhan143 said:
bro I installed stock Kk and root my device but I unable to install cusom recovery using freegee app.. Any other way to install custom recovery ?
Click to expand...
Click to collapse
Yoink.
^-- Freegee never lets me in unless I flash the Sphinx GPro Recovery CWM recovery first. Once that is done, it's all good.
culot said:
Yoink.
^-- Freegee never lets me in unless I flash the Sphinx GPro Recovery CWM recovery first. Once that is done, it's all good.
Click to expand...
Click to collapse
Thanks I will try it soon..!
culot said:
Yoink.
^-- Freegee never lets me in unless I flash the Sphinx GPro Recovery CWM recovery first. Once that is done, it's all good.
Click to expand...
Click to collapse
Installed sucesfully but one problem in this cwm..external_sd mounting failed cwm ver 6.0.4.4
help plz
zohaibkhan143 said:
Installed sucesfully but one problem in this cwm..external_sd mounting failed cwm ver 6.0.4.4
help plz
Click to expand...
Click to collapse
Oh, no, you misunderstood: you don't use the CWM, you only install it and then quickly install *over* it with one of Freegee's recoveries. Never use the Sphinx CWM, as you'll get errors when you go to flash roms. You only insatll the Sphinx CWM so that Freegee will recognize your device and function, it's only a stepping stone to Freegee, not a recovery you should use on its own.
And, in light of recent developments on the TWRP 2.8 front, I'd say give that a try instead. It mounts your external SD just fine. THe only things I've flashed with it are BlissPop builds and Gapps, but all without an issue yet. Go for the one with the Play theme and enjoy its gorgeous colors.
Thanks buddy.. Freegee recognized my device and installed cwm succesfully
Sent from my LG-E980 using XDA Free mobile app
help
after kitkat update now I m installed those custom roms again but still there is a same wifi problem sick off totally !