First of all,thank you for your kind reply. Now i am giving you the complete picture what happens.
My phone LG Optimus G (F180L) is rooted and unfortunately i unistalled the applications Google Play tv and Play movie. WiFi is on and a message comes that software update is available. I allow to update. When the update finished, my phone reboots and stuck on LG logo. I Google and found the method below:
http://forum.xda-developers.com/showthread.php?t=2249500
Now TWRP 2.5.0.0 installed together with LGNPST TeenyBin
From the fastboot screen, it shows
PRODUCT NAME mako
VARIANT mako 32GB
HW VERSION rev_11 (&¤)
BOOTLOADER VERSION MAKOZ10f
BASEBAND VERSION N/A
CARRIER INFO None
SERIAL NUMBER xxxxx
SIGNING production
SECURE BOOT Enabled
LOCK STATE UNLOCKED
I could access the TWRP built in.
4) Then I used ADB to push ROM to the internal SDCARD and recovery to install. But this method failed – tried several ROMs which all gave errors initially. I discovered that the install script pointed at “e975” in(ro.product.device and ro.build.product but the phone reports “geehrc4g”
This is the output in recovery.log when trying to flash ROM
Warning: No file_contexts
script aborted: assert failed: getprop("ro.product.device") == "e975" || getprop("ro.build.product") == "e975"
assert failed: getprop("ro.product.device") == "e975" || getprop("ro.build.product") == "e975"
Following the advice(from internet) of changing the script by Deleting the ‘assert’ line in the script, then
E:Zip signature verification failed: 1
Error flashing zip '/sdcard/thinkingbridge.zip'
Updating partition details...
To ensure working environment I tried to flash gapps which worked perfectly so connection and recovery must be functional.
5) Now turning to: ”[GUIDE] How to UNBRICK your Optimus G - security error, bootloop etc”
I used the method described and downloaded the appropriate KDZ file etc. etc but flashing gives this log:
10:05:58 : Launching SW update
10:05:58 : Unpacking KDZ
10:06:05 : KDZ file extracted
10:06:13 : Files were extracted.
10:06:13 : LGMobileDL Load.
10:06:13 : Port = -1
10:06:13 : Connecting to phone
10:06:25 : Check Phone mode = 2
10:06:25 : Phone type check.......
10:06:26 : LGMobileDL.DLL Loading....
10:06:26 : _SetAuthMark Fail
10:06:26 : _SetAuthMark Ok : wAuthMark(65535)
10:06:26 : _DetachDLL Call
10:06:26 : _DetachDLL Call End
10:06:26 : ParamPhone\E97510
10:06:26 : Param : waitTime = 0
10:06:26 : Param : UsbHighSpeed = 1
10:06:26 : Param : PhoneMode = 2
10:06:26 : Param : BinVersion = E97510D_00
10:06:26 : Param : AuthMark = 65535
10:06:26 : Call fn_StartUpgrade
10:09:27 : 3GQCT : wParam = 100, lParam = 210
10:09:27 : Step : Upgrade Error error code = 210
10:09:27 : ResetStartInfo() Call
10:09:27 : _DetachDLL Call
10:09:27 : _DetachDLL Call End
10:09:27 : FreeLibrary Call
10:09:27 : FreeLibrary Call End
10:09:27 : ResetStartInfo() Call End
10:09:29 : ===FINISHED===
At the point where KDZ file is extracted the phone reverts from download mode to recovery which is probably why it fails.
I read the thread at xdadeveloper forum "[Q] Unbricking LG Optimus G e975 - using LGNPST, TWRP, ADB". Do all the things suugested but nothing happens.
I tried every method both on Win 7& XP but same error.Results are attached (see attachment)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
During flashing it goes from download mode into fast boot screen and in device manager,Other devices: "Android?" is shown. When i try to install the drivers, it only picks the Google nexus 4 drivers and show the device "Nexus 4 bootloader interface".
I am so worried because i buy the phone two months ago. I cannot afford .What is happening?
1) In recovery mode it shows that it it is a MAKO product. What is this mean because every thing i know is that it is a LG Optimus G F180L and after searching Google, i find that MAKO is a Nexus 4.
2) Is TeenyBin and LGPNST creates problem? If yes, what to do?
Where is the problem and what the problem? I am nearly to wheep.
How can i solve this problem? Please help me and reply me. I tried every method suggested on internet.
F180L problem solved
mansoor3131 said:
First of all,thank you for your kind reply. Now i am giving you the complete picture what happens.
My phone LG Optimus G (F180L) is rooted and unfortunately i unistalled the applications Google Play tv and Play movie. WiFi is on and a message comes that software update is available. I allow to update. When the update finished, my phone reboots and stuck on LG logo. I Google and found the method below:
http://forum.xda-developers.com/showthread.php?t=2249500
Now TWRP 2.5.0.0 installed together with LGNPST TeenyBin
From the fastboot screen, it shows
PRODUCT NAME mako
VARIANT mako 32GB
HW VERSION rev_11 (&¤)
BOOTLOADER VERSION MAKOZ10f
BASEBAND VERSION N/A
CARRIER INFO None
SERIAL NUMBER xxxxx
SIGNING production
SECURE BOOT Enabled
LOCK STATE UNLOCKED
I could access the TWRP built in.
4) Then I used ADB to push ROM to the internal SDCARD and recovery to install. But this method failed – tried several ROMs which all gave errors initially. I discovered that the install script pointed at “e975” in(ro.product.device and ro.build.product but the phone reports “geehrc4g”
This is the output in recovery.log when trying to flash ROM
Warning: No file_contexts
script aborted: assert failed: getprop("ro.product.device") == "e975" || getprop("ro.build.product") == "e975"
assert failed: getprop("ro.product.device") == "e975" || getprop("ro.build.product") == "e975"
Following the advice(from internet) of changing the script by Deleting the ‘assert’ line in the script, then
E:Zip signature verification failed: 1
Error flashing zip '/sdcard/thinkingbridge.zip'
Updating partition details...
To ensure working environment I tried to flash gapps which worked perfectly so connection and recovery must be functional.
5) Now turning to: ”[GUIDE] How to UNBRICK your Optimus G - security error, bootloop etc”
I used the method described and downloaded the appropriate KDZ file etc. etc but flashing gives this log:
10:05:58 : Launching SW update
10:05:58 : Unpacking KDZ
10:06:05 : KDZ file extracted
10:06:13 : Files were extracted.
10:06:13 : LGMobileDL Load.
10:06:13 : Port = -1
10:06:13 : Connecting to phone
10:06:25 : Check Phone mode = 2
10:06:25 : Phone type check.......
10:06:26 : LGMobileDL.DLL Loading....
10:06:26 : _SetAuthMark Fail
10:06:26 : _SetAuthMark Ok : wAuthMark(65535)
10:06:26 : _DetachDLL Call
10:06:26 : _DetachDLL Call End
10:06:26 : ParamPhone\E97510
10:06:26 : Param : waitTime = 0
10:06:26 : Param : UsbHighSpeed = 1
10:06:26 : Param : PhoneMode = 2
10:06:26 : Param : BinVersion = E97510D_00
10:06:26 : Param : AuthMark = 65535
10:06:26 : Call fn_StartUpgrade
10:09:27 : 3GQCT : wParam = 100, lParam = 210
10:09:27 : Step : Upgrade Error error code = 210
10:09:27 : ResetStartInfo() Call
10:09:27 : _DetachDLL Call
10:09:27 : _DetachDLL Call End
10:09:27 : FreeLibrary Call
10:09:27 : FreeLibrary Call End
10:09:27 : ResetStartInfo() Call End
10:09:29 : ===FINISHED===
At the point where KDZ file is extracted the phone reverts from download mode to recovery which is probably why it fails.
I read the thread at xdadeveloper forum "[Q] Unbricking LG Optimus G e975 - using LGNPST, TWRP, ADB". Do all the things suugested but nothing happens.
I tried every method both on Win 7& XP but same error.Results are attached (see attachment)
During flashing it goes from download mode into fast boot screen and in device manager,Other devices: "Android?" is shown. When i try to install the drivers, it only picks the Google nexus 4 drivers and show the device "Nexus 4 bootloader interface".
I am so worried because i buy the phone two months ago. I cannot afford .What is happening?
1) In recovery mode it shows that it it is a MAKO product. What is this mean because every thing i know is that it is a LG Optimus G F180L and after searching Google, i find that MAKO is a Nexus 4.
2) Is TeenyBin and LGPNST creates problem? If yes, what to do?
Where is the problem and what the problem? I am nearly to wheep.
How can i solve this problem? Please help me and reply me. I tried every method suggested on internet.
Click to expand...
Click to collapse
And all ends well. I found the TOT file, rename extension from TOT to BIN.Flash the file in phone using LGNPST and my phone back to its original state.
I specially thanks to Autoprime and Xboxfanj to help me, guide me specially Xboxfanj finds the TOT file for me on a Chinese forum,download it and upload on another site just for me. Thanks Xboxfanj.
Nice can u share tot file here for others to use.. thanks
Sent from my LG-E975 using Tapatalk
davevinci said:
Nice can u share tot file here for others to use.. thanks
Sent from my LG-E975 using Tapatalk
Click to expand...
Click to collapse
Why not but do not forget to thanks to xboxfanj for his effort. Here is the link
http://d-h.st/qRf
mansoor3131 said:
Why not but do not forget to thanks to xboxfanj for his effort. Here is the link
http://d-h.st/qRf
Click to expand...
Click to collapse
Can u explain what exactly happened to your phone?
Sent from my LG-E975 using Tapatalk
davevinci said:
Can u explain what exactly happened to your phone?
Sent from my LG-E975 using Tapatalk
Click to expand...
Click to collapse
Kindly read my thread at top of the page. It explains everything.For your convenience i am giving link:
http://forum.xda-developers.com/showthread.php?p=46883443#post46883443
mansoor3131 said:
Kindly read my thread at top of the page. It explains everything.For your convenience i am giving link:
http://forum.xda-developers.com/showthread.php?p=46883443#post46883443
Click to expand...
Click to collapse
So you mean your OG became a Nexus 4?
Sent from my LG-E975 using Tapatalk
davevinci said:
So you mean your OG became a Nexus 4?
Sent from my LG-E975 using Tapatalk
Click to expand...
Click to collapse
May be because it shows "Full Jelly Bean in Mako?" in device manager and when i tried to install drivers, it picks up the Nexus 4 drivers. Also after searching about start up screen Mako and no ROM works I guess it might be turned into Nexus 4.
mansoor3131 said:
May be because it shows "Full Jelly Bean in Mako?" in device manager and when i tried to install drivers, it picks up the Nexus 4 drivers. Also after searching about start up screen Mako and no ROM works I guess it might be turned into Nexus 4.
Click to expand...
Click to collapse
Ah i also read in AT&T LGNPST is only solution when converted to N4
Sent from my LG-E975 using Tapatalk
TOT file
mansoor3131 said:
And all ends well. I found the TOT file, rename extension from TOT to BIN.Flash the file in phone using LGNPST and my phone back to its original state.
I specially thanks to Autoprime and Xboxfanj to help me, guide me specially Xboxfanj finds the TOT file for me on a Chinese forum,download it and upload on another site just for me. Thanks Xboxfanj.
Click to expand...
Click to collapse
If you could tell me where did you find the TOT file i would apreciate it so much. i cannot find it. Im having the same experience as you did! Thank you.
jancisk said:
If you could tell me where did you find the TOT file i would apreciate it so much. i cannot find it. Im having the same experience as you did! Thank you.
Click to expand...
Click to collapse
Do you mean you can't find a direct download link posted a couple posts above?
kt-Froggy said:
Do you mean you can't find a direct download link posted a couple posts above?
Click to expand...
Click to collapse
it contains the mp3 files in it
any working e975 dll. currently unable to register the LGE975_130116_LGFLASHv141.dll found on the net.
or which dll you have used for lg e975 ?
br
can u plzz help me sir
hello sir,, can u help me with my F180L, i had deleted my korean apps and it ended me to a security error i had tried the tsilenzio automated LGNPST and flash the ls970.dll and .bin,, it my phone become ls970 i can,t used my camera now,, plzz help me how can i turn back to normal my phone,, or converted to e975 so i can used my camera ( plzz help me sir tnx in advance
not clear what your method
mansoor3131 said:
And all ends well. I found the TOT file, rename extension from TOT to BIN.Flash the file in phone using LGNPST and my phone back to its original state.
I specially thanks to Autoprime and Xboxfanj to help me, guide me specially Xboxfanj finds the TOT file for me on a Chinese forum,download it and upload on another site just for me. Thanks Xboxfanj.
Click to expand...
Click to collapse
hello there.. i have same problem with you which problem for flashing using kdz updater..wparam 100 iparan 210
what method you use? i am not clear about that tot file and LGNPST
TOT file in the link above is not available. Can you provide another link
Thanks
mansoor3131 said:
First of all,thank you for your kind reply. Now i am giving you the complete picture what happens.
My phone LG Optimus G (F180L) is rooted and unfortunately i unistalled the applications Google Play tv and Play movie. WiFi is on and a message comes that software update is available. I allow to update. When the update finished, my phone reboots and stuck on LG logo. I Google and found the method below:
http://forum.xda-developers.com/showthread.php?t=2249500
Now TWRP 2.5.0.0 installed together with LGNPST TeenyBin
From the fastboot screen, it shows
PRODUCT NAME mako
VARIANT mako 32GB
HW VERSION rev_11 (&¤)
BOOTLOADER VERSION MAKOZ10f
BASEBAND VERSION N/A
CARRIER INFO None
SERIAL NUMBER xxxxx
SIGNING production
SECURE BOOT Enabled
LOCK STATE UNLOCKED
I could access the TWRP built in.
4) Then I used ADB to push ROM to the internal SDCARD and recovery to install. But this method failed – tried several ROMs which all gave errors initially. I discovered that the install script pointed at “e975” in(ro.product.device and ro.build.product but the phone reports “geehrc4g”
This is the output in recovery.log when trying to flash ROM
Warning: No file_contexts
script aborted: assert failed: getprop("ro.product.device") == "e975" || getprop("ro.build.product") == "e975"
assert failed: getprop("ro.product.device") == "e975" || getprop("ro.build.product") == "e975"
Following the advice(from internet) of changing the script by Deleting the ‘assert’ line in the script, then
E:Zip signature verification failed: 1
Error flashing zip '/sdcard/thinkingbridge.zip'
Updating partition details...
To ensure working environment I tried to flash gapps which worked perfectly so connection and recovery must be functional.
5) Now turning to: ”[GUIDE] How to UNBRICK your Optimus G - security error, bootloop etc”
I used the method described and downloaded the appropriate KDZ file etc. etc but flashing gives this log:
10:05:58 : Launching SW update
10:05:58 : Unpacking KDZ
10:06:05 : KDZ file extracted
10:06:13 : Files were extracted.
10:06:13 : LGMobileDL Load.
10:06:13 : Port = -1
10:06:13 : Connecting to phone
10:06:25 : Check Phone mode = 2
10:06:25 : Phone type check.......
10:06:26 : LGMobileDL.DLL Loading....
10:06:26 : _SetAuthMark Fail
10:06:26 : _SetAuthMark Ok : wAuthMark(65535)
10:06:26 : _DetachDLL Call
10:06:26 : _DetachDLL Call End
10:06:26 : ParamPhone\E97510
10:06:26 : Param : waitTime = 0
10:06:26 : Param : UsbHighSpeed = 1
10:06:26 : Param : PhoneMode = 2
10:06:26 : Param : BinVersion = E97510D_00
10:06:26 : Param : AuthMark = 65535
10:06:26 : Call fn_StartUpgrade
10:09:27 : 3GQCT : wParam = 100, lParam = 210
10:09:27 : Step : Upgrade Error error code = 210
10:09:27 : ResetStartInfo() Call
10:09:27 : _DetachDLL Call
10:09:27 : _DetachDLL Call End
10:09:27 : FreeLibrary Call
10:09:27 : FreeLibrary Call End
10:09:27 : ResetStartInfo() Call End
10:09:29 : ===FINISHED===
At the point where KDZ file is extracted the phone reverts from download mode to recovery which is probably why it fails.
I read the thread at xdadeveloper forum "[Q] Unbricking LG Optimus G e975 - using LGNPST, TWRP, ADB". Do all the things suugested but nothing happens.
I tried every method both on Win 7& XP but same error.Results are attached (see attachment)
During flashing it goes from download mode into fast boot screen and in device manager,Other devices: "Android?" is shown. When i try to install the drivers, it only picks the Google nexus 4 drivers and show the device "Nexus 4 bootloader interface".
I am so worried because i buy the phone two months ago. I cannot afford .What is happening?
1) In recovery mode it shows that it it is a MAKO product. What is this mean because every thing i know is that it is a LG Optimus G F180L and after searching Google, i find that MAKO is a Nexus 4.
2) Is TeenyBin and LGPNST creates problem? If yes, what to do?
Where is the problem and what the problem? I am nearly to wheep.
How can i solve this problem? Please help me and reply me. I tried every method suggested on internet.
Click to expand...
Click to collapse
you may give this a try http://forum.xda-developers.com/showthread.php?t=2667398
Recovery mode only
Hello,
I have F180L, I upgraded it to 4.4.2 kitkat then rooted it with freegee and installed cwm via freegee. then booted into recovery and installed Sling 2.2 kitkat. every thing was working great until I factory reset the phone. Now, the phone is stuck in cwm. It starts and boots into cwm . even if I turn off the phone and plug in the power, the phone boots in cwm. it is not even charging because of the led light which is always on in cwm. I have tried everything but nothing is happening ....
someone plz help me and suggest me something to charge and unbrick my phone
Recovery mode only
w8ing for reply...
someone help me please
farhan.ahmed said:
w8ing for reply...
someone help me please
Click to expand...
Click to collapse
Turn off the phone holding the power button for 15 to 20 sec and plug in the usb cable while holding both volume button to go to download mode and flash kdz in cs_emergancy mode if not for work then use the LGPSTN and 975 TOT file to recover to stock and flash any desire stock rom via normal method. you can do the process to custom rom after that I think
hackenggr said:
Turn off the phone holding the power button for 15 to 20 sec and plug in the usb cable while holding both volume button to go to download mode and flash kdz in cs_emergancy mode if not for work then use the LGPSTN and 975 TOT file to recover to stock and flash any desire stock rom via normal method. you can do the process to custom rom after that I think
Click to expand...
Click to collapse
how can i charge it ?
flash light stays on in cwm when i plug in the charger thats why it is only 2% since last 6 hours
Related
My phone won't turn on. I keep pressing the power key, but nothing happens.
zdzdz said:
My phone won't turn on. I keep pressing the power key, but nothing happens.
Click to expand...
Click to collapse
Can you access the downloads menu?
Vol -, Vol + and connect the usb cable
I don't know. When I try that the screen never turns on.
Maybe if you tell us what rom were you using,if you apploed any oc/uv to the phone,we can help you more...with poor info like you provided,we can only tell you,heck,press the power button...
Sent from LG E975 pwd by CM 10.2
My firmware is stock 10D. I decided to root it. Everything went well.
After that I tried to change a font in the system folder.
After a reboot it went in boot loop. It stuck on LG logo.
I used this method http://forum.xda-developers.com/showthread.php?t=2010624
It stuck on this:
Code:
[R&D Test Tools Log File]
20:02:42 : Launching SW update
20:02:42 : Unpacking KDZ
20:02:55 : KDZ file extraced
20:03:15 : Files were extracted.
20:03:15 : LGMobileDL Load.
20:03:15 : Port = -1
20:03:15 : Connecting to phone
20:03:30 : Check Phone mode = 2
20:03:30 : Phone type check.......
20:03:32 : LGMobileDL.DLL Loading....
20:03:32 : _SetAuthMark Fail
20:03:32 : _SetAuthMark Ok : wAuthMark(65535)
20:03:32 : _DetachDLL Call
20:03:32 : _DetachDLL Call End
20:03:32 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\E97510D_00.dz
20:03:32 : Param : moduleDir =
20:03:32 : Param : waitTime = 0
20:03:32 : Param : UsbHighSpeed = 1
20:03:32 : Param : PhoneMode = 2
20:03:32 : Param : BinVersion = E97510D_00
20:03:32 : Param : AuthMark = 65535
20:03:32 : Call fn_StartUpgrade
After I tried to turn it on by pressing the turn-on key for long time, the phone wouldn't respond any more.
Is there a possibility that the bootloader got deleted because of this method?
zdzdz said:
My firmware is stock 10D. I decided to root it. Everything went well.
After that I tried to change a font in the system folder.
After a reboot it went in boot loop. It stuck on LG logo.
I used this method http://forum.xda-developers.com/showthread.php?t=2010624
It stuck on this:
Code:
[R&D Test Tools Log File]
20:02:42 : Launching SW update
20:02:42 : Unpacking KDZ
20:02:55 : KDZ file extraced
20:03:15 : Files were extracted.
20:03:15 : LGMobileDL Load.
20:03:15 : Port = -1
20:03:15 : Connecting to phone
20:03:30 : Check Phone mode = 2
20:03:30 : Phone type check.......
20:03:32 : LGMobileDL.DLL Loading....
20:03:32 : _SetAuthMark Fail
20:03:32 : _SetAuthMark Ok : wAuthMark(65535)
20:03:32 : _DetachDLL Call
20:03:32 : _DetachDLL Call End
20:03:32 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\E97510D_00.dz
20:03:32 : Param : moduleDir =
20:03:32 : Param : waitTime = 0
20:03:32 : Param : UsbHighSpeed = 1
20:03:32 : Param : PhoneMode = 2
20:03:32 : Param : BinVersion = E97510D_00
20:03:32 : Param : AuthMark = 65535
20:03:32 : Call fn_StartUpgrade
After I tried to turn it on by pressing the turn-on key for long time, the phone wouldn't respond any more.
Is there a possibility that the bootloader got deleted because of this method?
Click to expand...
Click to collapse
No, from what I can read is not bootloader corrupt.
Run this program in compatibility mode? XP SP3, and as admin?
Choose cs_emergency and 3qct mode.
Sent from LG E975 pwd by CM 10.2
kimitza said:
Choose cs_emergency and 3qct mode.
Sent from LG E975 pwd by CM 10.2
Click to expand...
Click to collapse
Work for me!
After all nothing worked for me. I even took it to GSM Service Center (not LG) and after two days of doing nothing I got it back. They said I deleted the bootloader and told me I had to take it to a LG Service center to change the motherboard.
I wanted to try one last time and miraculously I restored everything back to how it used to be.
What I used was LGMobile Support Tool.
I clicked on Options->Upgrade Recovery
It downloaded the firmware and everything was restored. I didn't have to use a back up.
This phone is one tough sob. Will not go down so easy. If you are sure there are no trace to be seen,send it to warranty. You will get a new one. If you are not sure,go to a proper gsm service,where they have a jtag. They will re write the software,no problems. It will cost you,but...your phone will work. Here in romania it costs about 20 euros.the downside is they have to open the phone to connect the jtag interface to motherboard.
This is to be remembered.
Sent from LG E975 pwd by CM 10.2/smart phones,dumb people.
I have F180L. Phone is soft bricked. No operating system installed.I try it to flash ROM through LG offline Flash tool. After clicking Normal WEB Upgrade mode, it analyze, download the kdz file provided and during upgrading gives this error:
Extract Start C:\Users\Mansoor\Desktop\F180L20S_00.kdz*****
00:34:37 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\)
00:34:37 : File Size = 1259052458
00:35:39 : Extract kdz file Success.
00:35:39 : ExtractInfo Error(0)
00:35:39 : Extract cab file error.
00:35:39 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
00:35:39 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
00:35:39 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
00:35:39 : CLGMobileHttp Class ¼Ò¸ê½ÃÀÛ.
00:35:39 : CLGMobileHttp Class ¼Ò¸ê...
00:35:39 : Page_Error ºÎºÐÀÔ´Ï´Ù
00:35:39 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
Can anyone tell me what is the problem?
kdz is corrupt , try another or download from "lg-phone-firmware.com/index.php?id_mod=20"
majamis said:
kdz is corrupt , try another or download from "lg-phone-firmware.com/index.php?id_mod=20"
Click to expand...
Click to collapse
Try to downloading from that site gives error:
You don't have permission to access "http://csmgdl.lgmobile.com/swdata/WDLSW/LGF180L/ALGTBK/F180L20s_00/F180L20S_00.kdz" on this server.
Kindly help me. How can i verify that i have original uncorrupted ROM.
Thanks
Hey,guys
does anybody have F180s10j.kdz
maybe other ICS Stock firmware file...
I really need it, because I can't get any signals....
nmka0601 said:
Hey,guys
does anybody have F180s10j.kdz
maybe other ICS Stock firmware file...
I really need it, because I can't get any signals....
Click to expand...
Click to collapse
Why don't you have signals? Did you change your ROM? If yes flash the baseband only. No need of ROM.
Hello everyone!
I have tried to root my phone and install freegee to try out some custom roms. Everything worked fine till I finally had my hands on experience of the rom which I didnt like because of some aspects rid my essential phone needs like internet speed.
my question is how can I revert back to custom recovery and bootloader?
I tried to flash it using the old KDZ updater (which worked fine before) but after numerous attempts, the process gets interrupted. The error occurs and and my phone goes out of download mode and goes into fast boot. here's the log from the KDZ updater:
17:47:16 : Launching SW update
17:47:16 : Unpacking KDZ
17:47:55 : KDZ file extraced
17:48:57 : Files were extracted.
17:48:57 : LGMobileDL Load.
17:48:57 : Port = -1
17:48:57 : Connecting to phone
17:49:09 : Check Phone mode = 2
17:49:09 : Phone type check.......
17:49:10 : LGMobileDL.DLL Loading....
17:49:10 : _SetAuthMark Fail
17:49:10 : _SetAuthMark Ok : wAuthMark(65535)
17:49:10 : _DetachDLL Call
17:49:10 : _DetachDLL Call End
17:49:10 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\LGE975AT-00-V10f-ESA-XX-OCT-08-2013+0.dz
17:49:10 : Param : moduleDir =
17:49:10 : Param : waitTime = 0
17:49:10 : Param : UsbHighSpeed = 1
17:49:10 : Param : PhoneMode = 2
17:49:10 : Param : BinVersion = E97510F_00
17:49:10 : Param : AuthMark = 65535
17:49:10 : Call fn_StartUpgrade
the other variant of the KDZ updater using LG tool always says that my phone's battery is running low when in fact its battery is on 90%. Any inputs would be appreciated.
Little reading help, exact same problem discussed multiple times
When phone turns to boot loader, restart again in download mode and it well resume.
Sent from my LG-E975 using Tapatalk
Hi , I did 3 wipes installing last Cyanogenmod snapshot M2 . For a clean installation after 3 wipes I also formatted system. But flashing the zip has come this error : (Status 7) Installation aborted.
The point is that I can't reboot because it Always reboot on the recovery and I can't use KDZ because I can't turn it off so what can I do? Should I wait until phone uncharge and then use KDZ ? Or there are Others solutions with some other programs?
Thank you
fra6220 said:
Hi , I did 3 wipes installing last Cyanogenmod snapshot M2 . For a clean installation after 3 wipes I also formatted system. But flashing the zip has come this error : (Status 7) Installation aborted.
The point is that I can't reboot because it Always reboot on the recovery and I can't use KDZ because I can't turn it off so what can I do? Should I wait until phone uncharge and then use KDZ ? Or there are Others solutions with some other programs?
Thank you
Click to expand...
Click to collapse
You don't have to turn it off completely if you want to put the device in download mode for flashing kdz but anyway if you are using cwm go in advance menu and press power off i am pretty sure there must be something similar in twrp menu either
fra6220 said:
Hi , I did 3 wipes installing last Cyanogenmod snapshot M2 . For a clean installation after 3 wipes I also formatted system. But flashing the zip has come this error : (Status 7) Installation aborted.
The point is that I can't reboot because it Always reboot on the recovery and I can't use KDZ because I can't turn it off so what can I do? Should I wait until phone uncharge and then use KDZ ? Or there are Others solutions with some other programs?
Thank you
Click to expand...
Click to collapse
Same problem here, i cant flash latest upadates, cuz that problem is showing. Is there any option to send other room via CWM? Im pretty shure that other rom will be ok, but i dont have any other .zip in my phone. I can go in download mode, fastboot, and cwm, but nothing more.
Status 7 errors are mostly with CWM, try to flash TWRP recovery.
You will find flashables zip file here: http://forum.xda-developers.com/showthread.php?t=2443041
In CWM recovery you must use sideload ("Install zip from sideload") to get the new zip file. You can use sideload also for a new ROM.
markus_enzi said:
Status 7 errors are mostly with CWM, try to flash TWRP recovery.
You will find flashables zip file here: http://forum.xda-developers.com/showthread.php?t=2443041
In CWM recovery you must use sideload ("Install zip from sideload") to get the new zip file. You can use sideload also for a new ROM.
Click to expand...
Click to collapse
Could you tell me how to use this option? When i type adb sideload in cmd , it tells me that my device is unconected :/
And when i try to upload stock KDZ file ive got something like this in download mode
16:24:56 : Start Date : 2014-01-06 16:24:56
16:24:56 : ---------- QM Testmode ---------
16:24:56 : ***** Check Tool Version *****
16:24:56 : Tool version : 1.6.9.0
16:24:56 : UpgradeDLL version : 2.1.5.0
16:24:56 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
16:24:56 : LGE USB Driver Version :
16:24:56 : Android PDLV Version :
16:24:56 : Android NDLV Version :
16:24:56 : ******************************************
16:24:56 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
16:24:56 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
16:24:56 : SetEmerModeAT()
16:24:56 : _IsConnectedPhone Call
16:25:01 : _IsConnectedPhone(1)
16:25:01 : 0 - NotConnected.
16:25:01 : 1 - Normal connect success
16:25:01 : 2 - Emergency connect success
16:25:01 : _IsConnectedPhone Call for SmartPhone
16:25:01 : _IsConnectedPhone(0)
16:25:01 : 0 - NotConnected.
16:25:01 : 1 - Normal connect success
16:25:01 : 2 - Emergency connect success
16:25:01 : *****CheckOS Start********
16:25:01 : Microsoft_Windows7_Home Edition_Service Pack 1
16:25:01 : *****CheckPCSyncPrograms Start*****
16:25:02 : PCSyncPrograms Not Found - OK and ready to upgrade
16:25:02 : Sprawdzanie podłączenia telefonu...
16:25:02 : dwWaitResetTime(40000 ms)
16:25:03 : _IsConnectedPhone Call
16:25:08 : _IsConnectedPhone(1)
16:25:08 : 0 - NotConnected.
16:25:08 : 1 - Normal connect success
16:25:08 : 2 - Emergency connect success
16:25:08 : Phone Mode(1)
16:25:08 : *****GetPhoneType Start*****
16:25:08 : Nao pode continuar a atualizaçao devido a erros.\nSeguir a ordem: (1)Separar o cabo USB e a bateria do telefone; (2)Ligar a bateria; (3)Ligar o cabo USB ao telefone.\n(4) Pressionar o botao de ligar/desligar do telefone durante 3~5 segundos. Quando o telefone estiver ligado, pressione o botao [Reiniciar] para atualizar.\nIr para o Inicio da LG Móvel e ler avisos sobre atualizaçoes.\nPara finalizar a atualizaçao, pressione o botao [Terminar]. (_CheckPhoneType() Error)
16:25:08 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
16:25:08 : Page_Error şÎşĐŔÔ´Ď´Ů
16:25:08 : ż©±â´Â Retry şÎşĐŔÔ´Ď´Ů
16:25:08 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
Click to expand...
Click to collapse
To use sideload (all drivers for the phone must be installed on computer):
1.) in CWM recovery select "install zip from sideload"
2.) on pc put adb and zip file in same directory
3.) open console (with administrator privileges) and write "adb sideload NameOfRom.zip" (or any other zip file you want to flash)
4.) reboot
I have D855(Singapore) running on Kitkat 10n( I think its a custom rom since it has no option of software update check). Now I tried to install TWRP recovery through flashify. but when I am Rebooting into recovery its showing some 4 lines of messages like fastboot mode ,port change instead of going into recovery mode. Please help me how to install TWRP on my device to flash MM rom. Also While I am flashing a kdz I am getting error at 2%.
Here is the log of that. I want an urgent solution for this pls.
Log:
********* CDMA Model.dll input Parameter End*************
14:20:16 : MODEL DLL Event : (100, 72)
14:20:16 : Step : TYPE_WPARAM_UPGRADE_ERROR
14:20:16 : CleanModelDll() : Free Model.dll
14:20:16 : _DetachDLL Call
14:20:21 : _DetachDLL Call End
14:20:23 : Page_Error ºÎºÐÀÔ´Ï´Ù
14:20:23 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù