[Q] Galaxy Nexus bricked (OMAP4440 / OMAP4460) - Samsung Galaxy Nexus

I need help!
Today the screen on my phone started flashing green, and the phone was non-responsive. I took the battery out and reinserted it. After that, the phone wouldn't boot. When connected to the computer, it is detected as OMAP4440.
So I found and followed this guide: http://forum.xda-developers.com/showthread.php?t=2400171
But I get the following error (full log provided):
Code:
» OMAPFlash v4.15 (Aug 12 2011)
» -v
» Entering parameter file:Targets\Projects\tuna\omap4460_tuna_hs_pro.txt at line
: 1
» -omap 4
» -t 36000
» -p OMAP4460_TUNA_8G_HS_PRO
» -2
» chip_download EMMC Targets\Projects\tuna\MLO_4460_HS_PRO
» chip_download EMMC Targets\Projects\tuna\sbl.img
» command cold_sw_reset
» Leaving parameter file:Targets\Projects\tuna\omap4460_tuna_hs_pro.txt
» @Targets\Projects\tuna\omap4460_tuna_hs_pro.txt
» Looking for device (omap usb)
» Please turn on device
» Waiting for device (omap usb)
» Found device (omap usb)
» Requesting ASIC id
» AsicId items 05
» AsicId id 01 05 01 44 40 07 01
» AsicId secure_mode 13 02 01 00
» AsicId public_id 12 15 01 1B E8 11 31 7A 80 3F 75 B4 F7 AC 29 EB C6 04
D5 59 08 B6 14
» AsicId root_key_hash 14 21 01 67 98 9B 35 54 CC 86 B4 67 32 47 05 36 74 E2
25 F0 9D A3 5C F4 59 B9 C9 3A 13 E0 B9 58 1E 5A BC
» AsicId checksum 15 09 01 22 9E 85 BA DC 58 74 BC
» Searching 2nd for: OMAP4460_TUNA_8G_HS_PRO 444007 01 HS
» Loading second file Targets/2nd-Downloaders/dnld_startup_omap4_hs_8g_es2.s2.si
gned.2nd.hs_pro
» Entering parameter file:omapflash2nd.txt at line: 46
» -pheriphalboot_reopen
» Reading board configuration file Targets\Configurations\configuration_omap4460
_tuna_8g.txt
» Reading definition file .\targets\definitions\definitions_omap4.txt
» -board_config Targets\Configurations\configuration_omap4460_tuna_8g.txt
» Leaving parameter file:omapflash2nd.txt
» Sending size of second file (0x000071B0 bytes)
» Transferring second file to target (0x71B0 bytes)
» Closing boot connection
» Found device (omap usb)
» Waiting for 2nd
» Found 2nd
» Looking for a driver for 'EMMC'
» chip_driver EMMC Targets\Flash-Drivers\emmc_drv.bin sid 0 width 4 delay 9 rpap
i_base 0x00030400
» Downloading driver
» Operation FAILED (Remote: : Unknown command d)
» Elapsed time: 2:36.236
Press any key to continue . . .
Please, can anyone help me? I mustn't lose this phone
Oh, and here is the screenshot of drivers installed in device manager: http://prntscr.com/1xthub
The selected one (without the yellow sign) is the phone itself, as that one disappears when I disconnect the phone.
P.S. I am using Windows 8, but have installed the drivers using advanced boot options. However, the same error is reported on Windows 7 machine.

Anyone??

Try downloading and opening the free Play store app "eMMC Brickbug Check." If your eMMC chip is fried, you may want to check mobiletechvideos.com. Good luck!
Sent from my Galaxy Nexus using xda app-developers app

Jhall8 said:
Try downloading and opening the free Play store app "eMMC Brickbug Check." If your eMMC chip is fried, you may want to check mobiletechvideos.com. Good luck!
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
The phone won't boot broskibro.
Anyways I've seen this happen before on phones like the Droid RazR.
You're having some hardware failure buddy, not really sure what to tell you, was this on stock? You may have fried something with overclocking. I overclocked to 1.8GHz on Vanir and not too later it froze and turned purple. Learned my lesson there, thankfully everything is ok on it.

Beauenheim said:
The phone won't boot broskibro.
Anyways I've seen this happen before on phones like the Droid RazR.
You're having some hardware failure buddy, not really sure what to tell you, was this on stock? You may have fried something with overclocking. I overclocked to 1.8GHz on Vanir and not too later it froze and turned purple. Learned my lesson there, thankfully everything is ok on it.
Click to expand...
Click to collapse
Sorry, my bad.
Sent from my DROID RAZR HD using xda app-developers app

Related

[Q] won't turn on

Hello xda.
I just downloade the toolkit and the click on the option 9 flash google stock rom and now the wont turn even not into fast boot, when i click on the power bottom nothing happens even the recharing logo dosent come on what to do.
this is why most of the ppl here recommened using adb and not the toolkit.. with the toolkit you have no idea what went wrong
Thx
yea but i'm noob to adb so the toolkit was easy
yea now what to do
Thomaslje said:
yea but i'm noob to adb so the toolkit was easy
yea now what to do
Click to expand...
Click to collapse
see http://forum.xda-developers.com/showthread.php?t=1626895
but how to fix
Yea thx but now how to fix the turn on problem on the phone
Thomaslje said:
Yea thx but now how to fix the turn on problem on the phone
Click to expand...
Click to collapse
Press volume up +volume down then power at the same time to get into fastboot mode if not turn on ur phone and enable usb debug then open command in the file of adb (platform) and type "fastboot reboot-bootloader"
Sent from my Galaxy Nexus using xda premium
---------- Post added at 10:29 PM ---------- Previous post was at 10:05 PM ----------
If u can not get into fastboot mode, try to get into download mode and see my signature
Sent from my Galaxy Nexus using xda premium
samersh72 said:
Press volume up +volume down then power at the same time to get into fastboot mode if not turn on ur phone and enable usb debug then open command in the file of adb (platform) and type "fastboot reboot bootloader"
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
yea but I cant even get the phone to turn on and that wired.
Thomaslje said:
yea but I cant even get the phone to turn on and that wired.
Click to expand...
Click to collapse
Get into download mode by holding volume down + power and use odin (signature)
Sent from my Galaxy Nexus using xda premium
samersh72 said:
Get into download mode by holding volume down + power and use odin (signature)
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
ohh even the phone wont charge so I think totaly screwed
Thomaslje said:
ohh even the phone wont charge so I think totaly screwed
Click to expand...
Click to collapse
Download mode not working! Ur last chance seehttp://forum.xda-developers.com/showthread.php?p=28486488
Sent from my Galaxy Nexus using xda premium
Thomaslje said:
ohh even the phone wont charge so I think totaly screwed
Click to expand...
Click to collapse
Sounds like you hard bricked it. I just sent mine out for JTAG service today, hoping for the best. I had the same exact issue, phone was unresponsive to everything I tried.
samersh72 said:
Download mode not working! Ur last chance seehttp://forum.xda-developers.com/showthread.php?p=28486488
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
omg dude nice now I just nedd help to get the omap 4400 driver to work have downloade the file from rs
cane you help me over skype
Skype= Thomaslje
Thomaslje said:
omg dude nice now I just nedd help to get the omap 4400 driver to work have downloade the file from rs
cane you help me over skype
Skype= Thomaslje
Click to expand...
Click to collapse
Now i am on 3g when i reach my laptop i will add u
Sent from my Galaxy Nexus using xda premium
samersh72 said:
Now i am on 3g when i reach my laptop i will add u
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
damn thanks dude
edit got the driver to work in a virtual 32 bit machine now when i run the bat is says and nothin happens after » Waiting for 2nd
» OMAPFlash v4.15 (Aug 12 2011)
» -v
» Entering parameter file:Targets\Projects\tuna\omap4460_tuna_hs_pro.txt at lin
: 1
» -omap 4
» -t 36000
» -p OMAP4460_TUNA_8G_HS_PRO
» -2
» chip_download EMMC Targets\Projects\tuna\MLO_4460_HS_PRO
» chip_download EMMC Targets\Projects\tuna\sbl.img
» command cold_sw_reset
» Leaving parameter file:Targets\Projects\tuna\omap4460_tuna_hs_pro.txt
» @Targets\Projects\tuna\omap4460_tuna_hs_pro.txt
» Looking for device (omap usb)
» Please turn off device
» Please turn on device
» Waiting for device (omap usb)
» Found device (omap usb)
» Requesting ASIC id
» AsicId items 05
» AsicId id 01 05 01 44 40 07 01
» AsicId secure_mode 13 02 01 00
» AsicId public_id 12 15 01 83 33 03 D8 EC 1F CF D0 76 00 37 A3 71 3C 75
9C 2B 4A D6 E1
» AsicId root_key_hash 14 21 01 67 98 9B 35 54 CC 86 B4 67 32 47 05 36 74 E2
25 F0 9D A3 5C F4 59 B9 C9 3A 13 E0 B9 58 1E 5A BC
» AsicId checksum 15 09 01 22 9E 85 BA DC 58 74 BC
» Searching 2nd for: OMAP4460_TUNA_8G_HS_PRO 444007 01 HS
» Loading second file Targets/2nd-Downloaders/dnld_startup_omap4_hs_8g_es2.s2.s
gned.2nd.hs_pro
» Entering parameter filemapflash2nd.txt at line: 46
» -pheriphalboot_reopen
» Reading board configuration file Targets\Configurations\configuration_omap446
_tuna_8g.txt
» Reading definition file .\targets\definitions\definitions_omap4.txt
» -board_config Targets\Configurations\configuration_omap4460_tuna_8g.txt
» Leaving parameter filemapflash2nd.txt
» Sending size of second file (0x000071B0 bytes)
» Transferring second file to target (0x71B0 bytes)
» Closing boot connection
» Found device (omap usb)
» Waiting for 2nd
Thomaslje said:
damn thanks dude
edit got the driver to work in a virtual 32 bit machine now when i run the bat is says and nothin happens after » Waiting for 2nd
» OMAPFlash v4.15 (Aug 12 2011)
» -v
» Entering parameter file:Targets\Projects\tuna\omap4460_tuna_hs_pro.txt at lin
: 1
» -omap 4
» -t 36000
» -p OMAP4460_TUNA_8G_HS_PRO
» -2
» chip_download EMMC Targets\Projects\tuna\MLO_4460_HS_PRO
» chip_download EMMC Targets\Projects\tuna\sbl.img
» command cold_sw_reset
» Leaving parameter file:Targets\Projects\tuna\omap4460_tuna_hs_pro.txt
» @Targets\Projects\tuna\omap4460_tuna_hs_pro.txt
» Looking for device (omap usb)
» Please turn off device
» Please turn on device
» Waiting for device (omap usb)
» Found device (omap usb)
» Requesting ASIC id
» AsicId items 05
» AsicId id 01 05 01 44 40 07 01
» AsicId secure_mode 13 02 01 00
» AsicId public_id 12 15 01 83 33 03 D8 EC 1F CF D0 76 00 37 A3 71 3C 75
9C 2B 4A D6 E1
» AsicId root_key_hash 14 21 01 67 98 9B 35 54 CC 86 B4 67 32 47 05 36 74 E2
25 F0 9D A3 5C F4 59 B9 C9 3A 13 E0 B9 58 1E 5A BC
» AsicId checksum 15 09 01 22 9E 85 BA DC 58 74 BC
» Searching 2nd for: OMAP4460_TUNA_8G_HS_PRO 444007 01 HS
» Loading second file Targets/2nd-Downloaders/dnld_startup_omap4_hs_8g_es2.s2.s
gned.2nd.hs_pro
» Entering parameter filemapflash2nd.txt at line: 46
» -pheriphalboot_reopen
» Reading board configuration file Targets\Configurations\configuration_omap446
_tuna_8g.txt
» Reading definition file .\targets\definitions\definitions_omap4.txt
» -board_config Targets\Configurations\configuration_omap4460_tuna_8g.txt
» Leaving parameter filemapflash2nd.txt
» Sending size of second file (0x000071B0 bytes)
» Transferring second file to target (0x71B0 bytes)
» Closing boot connection
» Found device (omap usb)
» Waiting for 2nd
Click to expand...
Click to collapse
So can you access fastboot now?
Sent from my i9250
bk201doesntexist said:
So can you access fastboot now?
Sent from my i9250
Click to expand...
Click to collapse
No unfortenately not i can only run the bat file but then the it says
» Found device (omap usb)
» Waiting for 2nd
and then nothing happens
Thomaslje said:
No unfortenately not i can only run the bat file but then the it says
» Found device (omap usb)
» Waiting for 2nd
and then nothing happens
Click to expand...
Click to collapse
Don't use a VM?
Sent from my i9250
yea will try
Yea but i got no windows 32 machine and drivers only work on 32 bit
Thomaslje said:
Yea but i got no windows 32 machine and drivers only work on 32 bit
Click to expand...
Click to collapse
You don't have a x86 CPU?
Sent from my i9250
bk201doesntexist said:
You don't have a x86 CPU?
Sent from my i9250
Click to expand...
Click to collapse
yea but i dount got a 32 bit windows but will try it on my mothers machine when i come home she got 32 bit windows

[Q] Galaxy Nexus brick

As you can see from the title this is not a happy post...
I read many posts here at xda-developers and many others at other places but I did not find an answer to my questions.
My Galaxy Nexus does not show anything on the screen when I press the power button. It does not even vibrate.
It does not go either into fastboot or into download mode.
Here is what I've tried in attempt to recover the phone:
1. Pulled out the battery
2. Plugged the phone to the PC with USB wire
3. When I saw omap4440 in device manager i double clicked on it and installed the windows driver from OMAPFlash_tuna.zip. The driver was installed successfully.
4. Unplugged the phone
5. Started omap4460_tuna_hs_pro.bat
6. Plugged the phone to the PC with the USB wire
7. The phone was detected. Here is what I get in the console window:
» OMAPFlash v4.15 (Aug 12 2011)
» -v
» Entering parameter file:Targets\Projects\tuna\omap4460_tuna_hs_pro.txt at line: 1
» -omap 4
» -t 36000
» -p OMAP4460_TUNA_8G_HS_PRO
» -2
» chip_download EMMC Targets\Projects\tuna\MLO_4460_HS_PRO
» chip_download EMMC Targets\Projects\tuna\sbl.img
» command cold_sw_reset
» Leaving parameter file:Targets\Projects\tuna\omap4460_tuna_hs_pro.txt
» @Targets\Projects\tuna\omap4460_tuna_hs_pro.txt
» Looking for device (omap usb)
» Please turn on device
» Waiting for device (omap usb)
» Found device (omap usb)
» Requesting ASIC id
» AsicId items 05
» AsicId id 01 05 01 44 40 07 01
» AsicId secure_mode 13 02 01 00
» AsicId public_id 12 15 01 6B 64 0B C2 6B 7E EE 6A D0 65 19 75 3E C4 B0 70 63 A7 CE EB
» AsicId root_key_hash 14 21 01 67 98 9B 35 54 CC 86 B4 67 32 47 05 36 74 E2 25 F0 9D A3 5C F4 59 B9 C9 3A 13 E0 B9 58 1E 5A BC
» AsicId checksum 15 09 01 22 9E 85 BA DC 58 74 BC
» Searching 2nd for: OMAP4460_TUNA_8G_HS_PRO 444007 01 HS
» Loading second file Targets/2nd-Downloaders/dnld_startup_omap4_hs_8g_es2.s2.signed.2nd.hs_pro
» Entering parameter file: omapflash2nd.txt at line: 46
» -pheriphalboot_reopen
» Reading board configuration file Targets\Configurations\configuration_omap4460_tuna_8g.txt
» Reading definition file .\targets\definitions\definitions_omap4.txt
» -board_config Targets\Configurations\configuration_omap4460_tuna_8g.txt
» Leaving parameter file: omapflash2nd.txt
» Sending size of second file (0x000071B0 bytes)
» Transferring second file to target (0x71B0 bytes)
» Closing boot connection
» Found device (omap usb)
» Waiting for 2nd
» Found 2nd
» Looking for a driver for 'EMMC'
» chip_driver EMMC Targets\Flash-Drivers\emmc_drv.bin sid 0 width 4 delay 9 rpapi_base 0x00030400
» Downloading driver
» Operation FAILED (Remote: : Unknown command dri)
» Elapsed time: 0:07.843
Press any key to continue . . .​
Click to expand...
Click to collapse
What does that error "Operation FAILED (Remote: : Unknown command dri)" mean? Is there a way to revive the phone?
Thanks!
No one?

I believe my phone is unsalvageable :(

So my phone was in a bootloop but i could still get to recovery so i thought great ill just flash another rom. so i flashed another rom after doing all the neccesary wipes but my phone is still in a boot-loop, something mustve of went wrong because now my phone is in a bootloop BUT now it cant boot into fastboot or recovery so is there anyway i can salvage my phone :/. it still boots up just doesnt do anything:crying:
Flash stock images
Sent from my Galaxy Nexus using xda premium
flash stock rom . if issues still exist . contact with manufacture to fix it or replace a new one,
timgreen123 said:
flash stock rom . if issues still exist . contact with manufacture to fix it or replace a new one,
Click to expand...
Click to collapse
how would i flash a stockrom without recovery or fastboot?
gears177 said:
how would i flash a stockrom without recovery or fastboot?
Click to expand...
Click to collapse
Can it boot in download mode? Volume down + power
If yes flash with odin
Sent from my Galaxy Nexus using xda premium
it cannot boot into download fastboot or recovery only bootloops
omap flash
https://www.dropbox.com/s/y0aouzpuppdnivo/OMAPFlash_tuna.zip?v=0mcn
Mach3.2 said:
omap flash
https://www.dropbox.com/s/y0aouzpuppdnivo/OMAPFlash_tuna.zip?v=0mcn
Click to expand...
Click to collapse
Thnx ill try this
ummm im pretty lost with omap any tuts?
gears177 said:
ummm im pretty lost with omap any tuts?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=32508726
134k said:
http://forum.xda-developers.com/showthread.php?p=32508726
Click to expand...
Click to collapse
thanks i tried that but im ending up with this error can anyone help?
Code:
» OMAPFlash v4.15 (Aug 12 2011)
» -v
» Entering parameter file:Targets\Projects\espresso\omap4430hs_1200MHZ.txt at li
ne: 1
» -omap 4
» -t 36000
» -p OMAP4430_8G_HS
» -2
» chip_download EMMC Targets\Projects\espresso\MLO.hs
» chip_download EMMC Targets\Projects\espresso\Sbl.bin
» command cold_sw_reset
» Leaving parameter file:Targets\Projects\espresso\omap4430hs_1200MHZ.txt
» [user=1437028]@targets[/user]\Projects\espresso\omap4430hs_1200MHZ.txt
» Looking for device (omap usb)
» Please turn on device
» Waiting for device (omap usb)
» Found device (omap usb)
» Requesting ASIC id
» AsicId items 05
» AsicId id 01 05 01 44 40 07 01
» AsicId secure_mode 13 02 01 00
» AsicId public_id 12 15 01 32 E5 47 52 A9 86 C0 0D 37 ED C3 F6 FC 28 69
62 09 33 EB B9
» AsicId root_key_hash 14 21 01 67 98 9B 35 54 CC 86 B4 67 32 47 05 36 74 E2
25 F0 9D A3 5C F4 59 B9 C9 3A 13 E0 B9 58 1E 5A BC
» AsicId checksum 15 09 01 22 9E 85 BA DC 58 74 BC
» Searching 2nd for: OMAP4430_8G_HS 444007 01 HS
» Error no 2nd for: OMAP4430_8G_HS 444007 01 HS
Press any key to continue . . .
C:\Users\gears177\Desktop\OMAPFlash_1229_2ndlastt>GOTO __loop
» OMAPFlash v4.15 (Aug 12 2011)
» -v
» Entering parameter file:Targets\Projects\espresso\omap4430hs_1200MHZ.txt at li
ne: 1
» -omap 4
» -t 36000
» -p OMAP4430_8G_HS
» -2
» chip_download EMMC Targets\Projects\espresso\MLO.hs
» chip_download EMMC Targets\Projects\espresso\Sbl.bin
» command cold_sw_reset
» Leaving parameter file:Targets\Projects\espresso\omap4430hs_1200MHZ.txt
» [user=1437028]@targets[/user]\Projects\espresso\omap4430hs_1200MHZ.txt
» Looking for device (omap usb)
» Please turn off device
» Please turn on device
» Waiting for device (omap usb)
» Found device (omap usb)
» Requesting ASIC id
» AsicId items 05
» AsicId id 01 05 01 44 40 07 01
» AsicId secure_mode 13 02 01 00
» AsicId public_id 12 15 01 32 E5 47 52 A9 86 C0 0D 37 ED C3 F6 FC 28 69
62 09 33 EB B9
» AsicId root_key_hash 14 21 01 67 98 9B 35 54 CC 86 B4 67 32 47 05 36 74 E2
25 F0 9D A3 5C F4 59 B9 C9 3A 13 E0 B9 58 1E 5A BC
» AsicId checksum 15 09 01 22 9E 85 BA DC 58 74 BC
» Searching 2nd for: OMAP4430_8G_HS 444007 01 HS
» [B]Error no 2nd for: OMAP4430_8G_HS 444007 01 HS[/B]
Press any key to continue . . .
gears177 said:
thanks i tried that but im ending up with this error can anyone help?
Code:
» OMAPFlash v4.15 (Aug 12 2011)
» -v
» Entering parameter file:Targets\Projects\espresso\omap4430hs_1200MHZ.txt at li
ne: 1
» -omap 4
» -t 36000
» -p OMAP4430_8G_HS
» -2
» chip_download EMMC Targets\Projects\espresso\MLO.hs
» chip_download EMMC Targets\Projects\espresso\Sbl.bin
» command cold_sw_reset
» Leaving parameter file:Targets\Projects\espresso\omap4430hs_1200MHZ.txt
» [user=1437028]@targets[/user]\Projects\espresso\omap4430hs_1200MHZ.txt
» Looking for device (omap usb)
» Please turn on device
» Waiting for device (omap usb)
» Found device (omap usb)
» Requesting ASIC id
» AsicId items 05
» AsicId id 01 05 01 44 40 07 01
» AsicId secure_mode 13 02 01 00
» AsicId public_id 12 15 01 32 E5 47 52 A9 86 C0 0D 37 ED C3 F6 FC 28 69
62 09 33 EB B9
» AsicId root_key_hash 14 21 01 67 98 9B 35 54 CC 86 B4 67 32 47 05 36 74 E2
25 F0 9D A3 5C F4 59 B9 C9 3A 13 E0 B9 58 1E 5A BC
» AsicId checksum 15 09 01 22 9E 85 BA DC 58 74 BC
» Searching 2nd for: OMAP4430_8G_HS 444007 01 HS
» Error no 2nd for: OMAP4430_8G_HS 444007 01 HS
Press any key to continue . . .
C:\Users\gears177\Desktop\OMAPFlash_1229_2ndlastt>GOTO __loop
» OMAPFlash v4.15 (Aug 12 2011)
» -v
» Entering parameter file:Targets\Projects\espresso\omap4430hs_1200MHZ.txt at li
ne: 1
» -omap 4
» -t 36000
» -p OMAP4430_8G_HS
» -2
» chip_download EMMC Targets\Projects\espresso\MLO.hs
» chip_download EMMC Targets\Projects\espresso\Sbl.bin
» command cold_sw_reset
» Leaving parameter file:Targets\Projects\espresso\omap4430hs_1200MHZ.txt
» [user=1437028]@targets[/user]\Projects\espresso\omap4430hs_1200MHZ.txt
» Looking for device (omap usb)
» Please turn off device
» Please turn on device
» Waiting for device (omap usb)
» Found device (omap usb)
» Requesting ASIC id
» AsicId items 05
» AsicId id 01 05 01 44 40 07 01
» AsicId secure_mode 13 02 01 00
» AsicId public_id 12 15 01 32 E5 47 52 A9 86 C0 0D 37 ED C3 F6 FC 28 69
62 09 33 EB B9
» AsicId root_key_hash 14 21 01 67 98 9B 35 54 CC 86 B4 67 32 47 05 36 74 E2
25 F0 9D A3 5C F4 59 B9 C9 3A 13 E0 B9 58 1E 5A BC
» AsicId checksum 15 09 01 22 9E 85 BA DC 58 74 BC
» Searching 2nd for: OMAP4430_8G_HS 444007 01 HS
» [B]Error no 2nd for: OMAP4430_8G_HS 444007 01 HS[/B]
Press any key to continue . . .
Click to expand...
Click to collapse
You ran the wrong file, the gnex have a OMAP 4460, not a 4430.
Beamed from my Maguro.
Mach3.2 said:
You ran the wrong file, the gnex have a OMAP 4460, not a 4430.
Beamed from my Maguro.
Click to expand...
Click to collapse
ahh i see thank you i ran the right one and it worked fine no errors everything went fine but my phone is still the same :/ it shows up in device manager as samsung phone tho...

OMAP Flash help(Bricked)

Hi guys,
I'd just ask for help if anyone here encountered a Wrong driver version using OMAP Flash?
I always get OEAPFDASH V6 driver instead of the needed OMAP driver. My nexus is hard bricked and idk why
Code:
OMAPFlash v4.15 (Aug 12 2011)
» -v
» Entering parameter file:Targets\Projects\tuna\omap4460_tuna_hs_pro.txt at line
: 1
» -omap 4
» -t 36000
» -p OMAP4460_TUNA_8G_HS_PRO
» -2
» chip_download EMMC Targets\Projects\tuna\MLO_4460_HS_PRO
» chip_download EMMC Targets\Projects\tuna\sbl.img
» command cold_sw_reset
» Leaving parameter file:Targets\Projects\tuna\omap4460_tuna_hs_pro.txt
» @Targets\Projects\tuna\omap4460_tuna_hs_pro.txt
» Looking for device (omap usb)
» Please turn on device
» Waiting for device (omap usb)
» Found device (omap usb)
» Requesting ASIC id
» AsicId items 05
» AsicId id 01 05 01 44 40 07 01
» AsicId secure_mode 13 02 01 00
» AsicId public_id 12 15 01 A0 A5 88 38 7E 81 78 81 35 44 82 B1 CB 05 BA
26 FB BF F8 16
» AsicId root_key_hash 14 21 01 67 98 9B 35 54 CC 86 B4 67 32 47 05 36 74 E2
25 F0 9D A3 5C F4 59 B9 C9 3A 13 E0 B9 58 1E 5A BC
» AsicId checksum 15 09 01 22 9E 85 BA DC 58 74 BC
» Searching 2nd for: OMAP4460_TUNA_8G_HS_PRO 444007 01 HS
» Loading second file Targets/2nd-Downloaders/dnld_startup_omap4_hs_8g_es2.s2.si
gned.2nd.hs_pro
» Entering parameter file:omapflash2nd.txt at line: 46
» -pheriphalboot_reopen
» Reading board configuration file Targets\Configurations\configuration_omap4460
_tuna_8g.txt
» Reading definition file .\targets\definitions\definitions_omap4.txt
» -board_config Targets\Configurations\configuration_omap4460_tuna_8g.txt
» Leaving parameter file:omapflash2nd.txt
» Sending size of second file (0x000071B0 bytes)
» Transferring second file to target (0x71B0 bytes)
» Closing boot connection
» Found device (omap usb)
» Waiting for 2nd
» Found 2nd
» Looking for a driver for 'EMMC'
» chip_driver EMMC Targets\Flash-Drivers\emmc_drv.bin sid 0 width 4 delay 9 rpap
i_base 0x00030400
» Downloading driver
» Downloading 'Targets\Flash-Drivers\emmc_drv.bin'
» Sending data (47160 bytes) :::::::::::::::::::: [47160]
» Download failed (final data response error): Remote: : Fail: Wrong driver vers
ion expected OMAPFLASH DRIVER v6 got OEAPFDASH DRIVER v6
» Elapsed time: 0:00.040 (1179000 bytes/s)
» Operation FAILED (Remote: : Fail: Wrong driver version expected OMAPFLASH DRIV
ER v6 got OEAPFDASH DRIVER v6)
» Elapsed time: 0:09.502
Press any key to continue . . .
C:\Users\Chard\Desktop\OMAPFlash>GOTO __loop
» OMAPFlash v4.15 (Aug 12 2011)
» -v
» Entering parameter file:Targets\Projects\tuna\omap4460_tuna_hs_pro.txt at line
: 1
» -omap 4
» -t 36000
» -p OMAP4460_TUNA_8G_HS_PRO
» -2
» chip_download EMMC Targets\Projects\tuna\MLO_4460_HS_PRO
» chip_download EMMC Targets\Projects\tuna\sbl.img
» command cold_sw_reset
» Leaving parameter file:Targets\Projects\tuna\omap4460_tuna_hs_pro.txt
» @Targets\Projects\tuna\omap4460_tuna_hs_pro.txt
» Looking for device (omap usb)
» Please turn off device
» Please turn on device
» Waiting for device (omap usb)
» Found device (omap usb)
» Requesting ASIC id
» AsicId items 05
» AsicId id 01 05 01 44 40 07 01
» AsicId secure_mode 13 02 01 00
» AsicId public_id 12 15 01 A0 A5 88 38 7E 81 78 81 35 44 82 B1 CB 05 BA
26 FB BF F8 16
» AsicId root_key_hash 14 21 01 67 98 9B 35 54 CC 86 B4 67 32 47 05 36 74 E2
25 F0 9D A3 5C F4 59 B9 C9 3A 13 E0 B9 58 1E 5A BC
» AsicId checksum 15 09 01 22 9E 85 BA DC 58 74 BC
» Searching 2nd for: OMAP4460_TUNA_8G_HS_PRO 444007 01 HS
» Loading second file Targets/2nd-Downloaders/dnld_startup_omap4_hs_8g_es2.s2.si
gned.2nd.hs_pro
» Entering parameter file:omapflash2nd.txt at line: 46
» -pheriphalboot_reopen
» Reading board configuration file Targets\Configurations\configuration_omap4460
_tuna_8g.txt
» Reading definition file .\targets\definitions\definitions_omap4.txt
» -board_config Targets\Configurations\configuration_omap4460_tuna_8g.txt
» Leaving parameter file:omapflash2nd.txt
» Sending size of second file (0x000071B0 bytes)
» Transferring second file to target (0x71B0 bytes)
» Closing boot connection
» Found device (omap usb)
» Waiting for 2nd
» Found 2nd
» Looking for a driver for 'EMMC'
» chip_driver EMMC Targets\Flash-Drivers\emmc_drv.bin sid 0 width 4 delay 9 rpap
i_base 0x00030400
» Downloading driver
» Downloading 'Targets\Flash-Drivers\emmc_drv.bin'
» Sending data (47160 bytes) :::::::::::::::::::: [47160]
» Download failed (final data response error): Remote: : Fail: Wrong driver vers
ion expected OMAPFLASH DRIVER v6 got OEAPFDASH DRIVER v6
» Elapsed time: 0:00.036 (1310000 bytes/s)
» Operation FAILED (Remote: : Fail: Wrong driver version expected OMAPFLASH DRIV
ER v6 got OEAPFDASH DRIVER v6)
» Elapsed time: 1:07.173
Press any key to continue . . .
C:\Users\Chard\Desktop\OMAPFlash>GOTO __loop
» OMAPFlash v4.15 (Aug 12 2011)
» -v
» Entering parameter file:Targets\Projects\tuna\omap4460_tuna_hs_pro.txt at line
: 1
» -omap 4
» -t 36000
» -p OMAP4460_TUNA_8G_HS_PRO
» -2
» chip_download EMMC Targets\Projects\tuna\MLO_4460_HS_PRO
» chip_download EMMC Targets\Projects\tuna\sbl.img
» command cold_sw_reset
» Leaving parameter file:Targets\Projects\tuna\omap4460_tuna_hs_pro.txt
» @Targets\Projects\tuna\omap4460_tuna_hs_pro.txt
» Looking for device (omap usb)
» Please turn off device
» Please turn on device
» Waiting for device (omap usb)
» Found device (omap usb)
» Requesting ASIC id
» AsicId items 05
» AsicId id 01 05 01 44 40 07 01
» AsicId secure_mode 13 02 01 00
» AsicId public_id 12 15 01 A0 A5 88 38 7E 81 78 81 35 44 82 B1 CB 05 BA
26 FB BF F8 16
» AsicId root_key_hash 14 21 01 67 98 9B 35 54 CC 86 B4 67 32 47 05 36 74 E2
25 F0 9D A3 5C F4 59 B9 C9 3A 13 E0 B9 58 1E 5A BC
» AsicId checksum 15 09 01 22 9E 85 BA DC 58 74 BC
» Searching 2nd for: OMAP4460_TUNA_8G_HS_PRO 444007 01 HS
» Loading second file Targets/2nd-Downloaders/dnld_startup_omap4_hs_8g_es2.s2.si
gned.2nd.hs_pro
» Entering parameter file:omapflash2nd.txt at line: 46
» -pheriphalboot_reopen
» Reading board configuration file Targets\Configurations\configuration_omap4460
_tuna_8g.txt
» Reading definition file .\targets\definitions\definitions_omap4.txt
» -board_config Targets\Configurations\configuration_omap4460_tuna_8g.txt
» Leaving parameter file:omapflash2nd.txt
» Sending size of second file (0x000071B0 bytes)
» Transferring second file to target (0x71B0 bytes)
» Closing boot connection
» Found device (omap usb)
» Waiting for 2nd
» Found 2nd
» Looking for a driver for 'EMMC'
» chip_driver EMMC Targets\Flash-Drivers\emmc_drv.bin sid 0 width 4 delay 9 rpap
i_base 0x00030400
» Downloading driver
» Downloading 'Targets\Flash-Drivers\emmc_drv.bin'
» Sending data (47160 bytes) :::::::::::::::::::: [47160]
» Download failed (final data response error): Remote: : Fail: Wrong driver vers
ion expected OMAPFLASH DRIVER v6 got OEAPFDASH DRIVER v6
» Elapsed time: 0:00.036 (1310000 bytes/s)
» Operation FAILED (Remote: : Fail: Wrong driver version expected OMAPFLASH DRIV
ER v6 got OEAPFDASH DRIVER v6)
» Elapsed time: 0:07.625
Press any key to continue . . .
C:\Users\Chard\Desktop\OMAPFlash>GOTO __loop
» OMAPFlash v4.15 (Aug 12 2011)
» -v
» Entering parameter file:Targets\Projects\tuna\omap4460_tuna_hs_pro.txt at line
: 1
» -omap 4
» -t 36000
» -p OMAP4460_TUNA_8G_HS_PRO
» -2
» chip_download EMMC Targets\Projects\tuna\MLO_4460_HS_PRO
» chip_download EMMC Targets\Projects\tuna\sbl.img
» command cold_sw_reset
» Leaving parameter file:Targets\Projects\tuna\omap4460_tuna_hs_pro.txt
» @Targets\Projects\tuna\omap4460_tuna_hs_pro.txt
» Looking for device (omap usb)
» Please turn off device
help please how do i get to use the OMAPFLASH Driver?
Wrong driver vers
ion expected OMAPFLASH DRIVER v6 got OEAPFDASH DRIVER v6

[Q] Hard Brick Galaxy Nexus unknown command dri

Hi to everybody
I'm writing this in search of your help as I can't find a solution to my hard bricked gnex.
Yesterday I was surfing the net with my phone and suddenly it rebooted two times and crashed,,,
I wasn't able to either turn it on or charge it, now my terminal is totally unresponsive except for omapflash.
problem is that as you can see in the log I can't download EMMC driver
(if a mod explain to me how to do so I'll put this text into a spoiler tab so the post will be neater thx)
» OMAPFlash v4.15 (Aug 12 2011)
» -v
» Entering parameter file:Targets\Projects\tuna\omap4460_tuna_hs_pro.txt at line
: 1
» -omap 4
» -t 36000
» -p OMAP4460_TUNA_8G_HS_PRO
» -2
» chip_download EMMC Targets\Projects\tuna\MLO_4460_HS_PRO
» chip_download EMMC Targets\Projects\tuna\sbl.img
» command cold_sw_reset
» Leaving parameter file:Targets\Projects\tuna\omap4460_tuna_hs_pro.txt
» @targets\Projects\tuna\omap4460_tuna_hs_pro.txt
» Looking for device (omap usb)
» Please turn on device
» Waiting for device (omap usb)
» Found device (omap usb)
» Requesting ASIC id
» AsicId items 05
» AsicId id 01 05 01 44 40 07 01
» AsicId secure_mode 13 02 01 00
» AsicId public_id 12 15 01 EE 6E 23 11 BA CD 41 3E 89 EC 76 5F 96 A5 45
0D 78 BB 51 4C
» AsicId root_key_hash 14 21 01 67 98 9B 35 54 CC 86 B4 67 32 47 05 36 74 E2
25 F0 9D A3 5C F4 59 B9 C9 3A 13 E0 B9 58 1E 5A BC
» AsicId checksum 15 09 01 22 9E 85 BA DC 58 74 BC
» Searching 2nd for: OMAP4460_TUNA_8G_HS_PRO 444007 01 HS
» Loading second file Targets/2nd-Downloaders/dnld_startup_omap4_hs_8g_es2.s2.si
gned.2nd.hs_pro
» Entering parameter filemapflash2nd.txt at line: 46
» -pheriphalboot_reopen
» Reading board configuration file Targets\Configurations\configuration_omap4460
_tuna_8g.txt
» Reading definition file .\targets\definitions\definitions_omap4.txt
» -board_config Targets\Configurations\configuration_omap4460_tuna_8g.txt
» Leaving parameter filemapflash2nd.txt
» Sending size of second file (0x000071B0 bytes)
» Transferring second file to target (0x71B0 bytes)
» Closing boot connection
» Found device (omap usb)
» Waiting for 2nd
» Found 2nd
» Looking for a driver for 'EMMC'
» chip_driver EMMC Targets\Flash-Drivers\emmc_drv.bin sid 0 width 4 delay 9 rpap
i_base 0x00030400
» Downloading driver
» Operation FAILED (Remote: : Unknown command dri)
» Elapsed time: 0:09.745
Premere un tasto per continuare . . .
what can I do? I already tried a self made usb jig with nno results
(I'm not an expert in solddering though so maybe something went wrong in the procedure)
is there any way I can learn how to go past this frustrating situation? (I bought a nexus thinking to be able to experiment and learn something new by almost avoiding the risk of making my phone a futile brick, There MUST be a way please help)
Also on a sidenote my phone is one of the famous c8 that had proximity sensor problems...

Categories

Resources