Related
running motorolla defy with cyanogen mod 7
any idea how to get around the problem
I think you should go to Hardware Devices & manually select driver for your phone,
as it is showing MTP, you should manually select USB Transfer Device Or similar driver.
Best of luck
I have the same issue with my Defy on cyanogenMod 7
I have this problem after upgrade my windows 7 from 32bit to hp 64 version.
Sent from my MB526 using Tapatalk
Update it from MTP Driver to USB Tranferring Driver, it will work
rawfire said:
Update it from MTP Driver to USB Tranferring Driver, it will work
Click to expand...
Click to collapse
I changed to usb mass storage yesterday. And I tried again with usb debugging enabled, it's worked. Thanks.
Sent from my MB526 using Tapatalk
I knew it.
Hopefully it help others too
om4gus said:
I changed to usb mass storage yesterday. And I tried again with usb debugging enabled, it's worked. Thanks.
Sent from my MB526 using Tapatalk
Click to expand...
Click to collapse
Hi,
I just got the same problem with latest nightly. 110817-1717
Where did you find the USB mass storage driver?
no luck finding any here.. on winodws 7
can you tell me the details please
on how to ?
kaljam said:
Hi,
I just got the same problem with latest nightly. 110817-1717
Where did you find the USB mass storage driver?
Click to expand...
Click to collapse
I am using win7 standard driver. Try to install Motorola Media Link if your windows doesn't have it. Click Update driver in Device Manager, and use advance, in pick driver, there're 2 compatible drivers, you can select it from there.
I tried that, but non of the drivers work. Thanks anyway.
Assuming you're using Windows 7,
-Right click on your [My Computer]
-Click [Device Manager]
-Check for MTP Devices, open it & Click on Update Software Driver
-Browse my computer for Driver Software, then Let me pick from List of drivers
-Choose USB & then Generic USB driver
It's gonna work perfectly fine then hopefully
Thanks but no go I guess it's a Win7 X64 problem. It doesn’t matter if it works or not. I never use the portal USB state anyway.
I'm just "anal" about stuff not working on my PC Usually I’m the guy who friends ask about Win problems . I guess it's time to step down from the throne. I didn’t think it would happened in my lifetime :=)
Works fine on w7 x64 enterprise.
Thx.
Sent from my MB525 using Tapatalk
have tried it all,
no help, doesn't show my device as MTP device, even my nokia phone is recognized as MTP, but not defy with CM7
This could help you. For me it worked.
I have 'SuperOneClickv1.9.5-ShortFuse.Drivers.rar' on my computer. I've extracted the Motorola folder with drivers. Went to Device Manager, right click on MTP device and update driver - select manualy - browse to the previously extracted Motorola folder with drivers - select update. After few seconds the drivers were installed.
Here is the (dropbox) download link for RAR archive of the Motorola drivers (size 1.32 mb).
jollyb said:
This could help you. For me it worked.
I have 'SuperOneClickv1.9.5-ShortFuse.Drivers.rar' on my computer. I've extracted the Motorola folder with drivers. Went to Device Manager, right click on MTP device and update driver - select manualy - browse to the previously extracted Motorola folder with drivers - select update. After few seconds the drivers were installed.
Click to expand...
Click to collapse
did that, now I can see that the MTP device shows no problems but when I connect my defy it doesn.t show up on windows as a MTP,
under devices and printers thought it shows all the motorola drivers installed fine
Good day,
Can someone please tell me where can i download the drivers for micromax android one, my device is not detected in adb on windows 7?
Thanks,
marc
+100000
Really needed
I have searched for it but not found
Even looked on their official website but it doesn't shows a1 model number
Switch off phone. connect to pc. restart phone. it should install adb. also check if debugging is enabled.
Recognized Noob said:
Switch off phone. connect to pc. restart phone. it should install adb. also check if debugging is enabled.
Click to expand...
Click to collapse
Thanks for replying
But this method is not working with my windows 8.1
Still device is not detected
http://forum.xda-developers.com/can...ial-stock-rom-canvas-a1-t2887150/post55662339
see this thread which has link for drivers.
fyh said:
Thanks for replying
But this method is not working with my windows 8.1
Still device is not detected
Click to expand...
Click to collapse
The thing with windows 8.1 (atleast x64) is that they have changed the way adb drivers are recognized (or not recognized). You might have to:
1) In windows device manager find ADB Driver (or unrecognized hardware corresponding to the adb driver). Right click and select "update driver software".
2) Select "Browse my computer for driver software".
3) Select "Let me pick from a list of device drivers on my computer."
4) With "show compatible hardware" checkbox ticked, two drivers should be shown.
(a) Android ADB Interface. and (b) MTP User Device or Composite USB device.
5) Select (a) above and click Next.
6) Device should now appear.
Always good to use the default adb drivers from google for this. (https://developer.android.com/sdk/win-usb.html)
Hi marcusflint, Sorry to ask the obvious but was USB debugging enabled in developer options?
marcusflint said:
Good day,
Can someone please tell me where can i download the drivers for micromax android one, my device is not detected in adb on windows 7?
Thanks,
marc
Click to expand...
Click to collapse
Unistall the drivers from Device Manger and re-connect the device to PC ! Working gr8 and solves the MTP device recognition issue as well
avinash60 said:
The thing with windows 8.1 (atleast x64) is that they have changed the way adb drivers are recognized (or not recognized). You might have to:
....)
Click to expand...
Click to collapse
ADB driver is installed properly but the MTP isn't installed so I can't enable the mass storage device
I dunno MTP is even required for mass storage device, how come I enable it (I want my computer to detect my SD card which is in this Canvas A1 phone) ?
I am on Windows 8.1 x64
thanks
My problem is that my phone cannot detect the phone drive but it can detect SD card
LOleyer said:
My problem is that my phone cannot detect the phone drive but it can detect SD card
Click to expand...
Click to collapse
then install this.
http://www.micromaxinfo.com/mmx/CanvasA1/AQ4501.zip
I have recently root my samsung tab pro 8.4 wifi version. Everything seems to work well, except USB connection to my windows7 desktop. I installed the latest version of Samsung usb driver (download from Samsung's web site for my device). Whenever I connect it, media device mode, the "installing device driver software" icon spins for couple of minutes, then I got the error of "Device driver software was not successfully installed" . In the detail dialog window, it says "MTP USB Device" failed with a red cross. what did I do wrong? thanks.
I have tried several different USB 2 ports on my computers. Also I have Developer mode turned on, with or w/o USB debugging checked. Nothing seems to work. Also the camera mode doesn't work either.
Did you install kies 3 from samsung?, this should install all the drivers you need.
http://www.samsung.com/us/kies/
I tried with this version of kies from samsung's website, not working. Got the same failed to install device driver message.
In windows device mananger, it shows a MTP USB device with yellow "!" mark on it. If I try to update driver from here with the driver installed on my computer, it says I have the latest driver installed already.
dealcrack said:
I tried with this version of kies from samsung's website, not working. Got the same failed to install device driver message.
In windows device mananger, it shows a MTP USB device with yellow "!" mark on it. If I try to update driver from here with the driver installed on my computer, it says I have the latest driver installed already.
Click to expand...
Click to collapse
Try going to Device Manager in Windows, find the device, pick the option to select from the drivers on the computer, then pick the "USB MTP drivers" (generic, not Samsung) and see if that helps.
redpoint73 said:
Try going to Device Manager in Windows, find the device, pick the option to select from the drivers on the computer, then pick the "USB MTP drivers" (generic, not Samsung) and see if that helps.
Click to expand...
Click to collapse
thanks for your help. I tried your suggestion, and
I went to the Device Manager, and select the "MTP USB Device" with yellow "!" mark, choose this menu,
Update driver software->Browse my computer for driver software->let me pick from a list of device drivers on my computer
I see two drivers, however either works for my 8.4 pad. It says "This device cannot start (code 10)"
Also when I open the properties for this device in device manager, it shows its driver running is from Microsoft, driver version 6.1.7600.16385. Should be a driver from Samsung?
dealcrack said:
thanks for your help. I tried your suggestion, and
I went to the Device Manager, and select the "MTP USB Device" with yellow "!" mark, choose this menu,
Update driver software->Browse my computer for driver software->let me pick from a list of device drivers on my computer
I see two drivers, however either works for my 8.4 pad. It says "This device cannot start (code 10)"
Also when I open the properties for this device in device manager, it shows its driver running is from Microsoft, driver version 6.1.7600.16385. Should be a driver from Samsung?
Click to expand...
Click to collapse
Are you running stock TouchWiz ROM? Just to be sure.
Otherwise you could remove all your USB drivers related to Android and start from scratch with just the Sammy driver. I had to do that for my previous OnePlus One, it just wouldn't connect. It chose a wrong driver each time I hooked it up so I had to just remove those from the driver store and then make it choose another one. That was for ADB thought, but I guess it couldn't hurt to try anyways.
The reason I'm mentioning if you're on stock ROM is because this morning, on CM nightly 01-24 I had some troubles with my tablet being read by Windows, it was fixed in 26 so.. Just wanted to mention it.
CuraeL said:
Are you running stock TouchWiz ROM? Just to be sure.
Otherwise you could remove all your USB drivers related to Android and start from scratch with just the Sammy driver. I had to do that for my previous OnePlus One, it just wouldn't connect. It chose a wrong driver each time I hooked it up so I had to just remove those from the driver store and then make it choose another one. That was for ADB thought, but I guess it couldn't hurt to try anyways.
The reason I'm mentioning if you're on stock ROM is because this morning, on CM nightly 01-24 I had some troubles with my tablet being read by Windows, it was fixed in 26 so.. Just wanted to mention it.
Click to expand...
Click to collapse
Yes, I am on the stock TouchWiz ROM, but I rooted it following steps from one thread in this forum. Before rooting, I was able to connect. I do have a LG G3 phone connecting to the same computer successfully. Will this cause any problem? Will going to CM ROM solve my problem?
Also, can you tell me steps to remove all my USB drivers related to Android in Windows 7?
dealcrack said:
Yes, I am on the stock TouchWiz ROM, but I rooted it following steps from one thread in this forum. Before rooting, I was able to connect. I do have a LG G3 phone connecting to the same computer successfully. Will this cause any problem? Will going to CM ROM solve my problem?
Also, can you tell me steps to remove all my USB drivers related to Android in Windows 7?
Click to expand...
Click to collapse
It may work to install CM11 or CM12, BUT try this toolfirst (uploaded to my personal box account) Find all your mobile device drivers in this list and mark them and go to "File" and click "Uninstall marked drivers", restart your PC and plug in your tablet. Then try plugging in LG after so it gets drivers later. I'm not sure if it will work. But it should apply new drivers. If it doesn't work, uninstall the drivers one more time and download the Samsung drivers from 3rd party and install them and apply then manually to your tablet through Device Manager in Windows.
https://app.box.com/s/7njztz17hekfkpxbjk7h79xsctnmuptn
Anyways, try this first.
dealcrack said:
I do have a LG G3 phone connecting to the same computer successfully. Will this cause any problem?
Click to expand...
Click to collapse
Its always a possibility. I'd try to uninstall the LG drivers. You can always re-install later (if needed).
In a perfect world, the Sammy drivers would be what you want. But this is of course not a perfect world. I've had better luck using the "generic" Microsoft MTP USB drivers over the HTC drivers on my HTC devices.
CuraeL said:
It may work to install CM11 or CM12, BUT try this toolfirst (uploaded to my personal box account) Find all your mobile device drivers in this list and mark them and go to "File" and click "Uninstall marked drivers", restart your PC and plug in your tablet. Then try plugging in LG after so it gets drivers later. I'm not sure if it will work. But it should apply new drivers. If it doesn't work, uninstall the drivers one more time and download the Samsung drivers from 3rd party and install them and apply then manually to your tablet through Device Manager in Windows.
https://app.box.com/s/7njztz17hekfkpxbjk7h79xsctnmuptn
Anyways, try this first.
Click to expand...
Click to collapse
I download this tool, and remove all Samsung or Android related USB driver. Restart my computer and connect the pad it's not working. Then I uninstall the Samsung driver software, and all USB driver. Then restart and install a samsung driver from the thread about how to root my pad in this forum. Connect my pad, no luck. Still the same problem. I am about to give up.
redpoint73 said:
Its always a possibility. I'd try to uninstall the LG drivers. You can always re-install later (if needed).
In a perfect world, the Sammy drivers would be what you want. But this is of course not a perfect world. I've had better luck using the "generic" Microsoft MTP USB drivers over the HTC drivers on my HTC devices.
Click to expand...
Click to collapse
I uninstall my LG driver too, along with all Samsung/Android usb driver with the tool from previous reply. No luck, It still shows a MTP device with yellow "!" mark.
Just before I about to give it up, it connects to my another computer now, which is my main computer and it had trouble connecting to. All I did was restart my pad several time and odin twrp recovery to it. It connects after rebooting. No idea what cause this problem, but it works now. thank you for all your help.
dealcrack said:
Just before I about to give it up, it connects to my another computer now, which is my main computer and it had trouble connecting to. All I did was restart my pad several time and odin twrp recovery to it. It connects after rebooting. No idea what cause this problem, but it works now. thank you for all your help.
Click to expand...
Click to collapse
Glad you sorted it out, to some degree or other.
USB connectivity on Android devices is very tricky, at least on Windows (can't speak on other OSes). My HTC phone connects fine to my work laptop with the HTC drivers. On my home computer (also Win7) it frequently drops adb connection and I have to manually select the "generic" Microsoft drivers to make it work (and the HTC drivers never seemed to work completely right either). My Sammy Pro 8.4 seems to connect just fine to my home PC, however. So it seems its just a crap shoot what kind of connectivity you will get, really.
Running the latest Omni rom, and having problems connecting the phone to the pc for usb file transfer.
- Oppo find 7a running latest Nightly Omni rom with LVM
- Windows 10
The pc makes the connection sound but nothing shows up in the file explorer, under device an "android" device shows up but nothing there works either. I can see a "google nexus adb interface" in the hardware tab when running ptp and mtp.
Tried the following :
- Switching usb settings from charging to mtp / ptp and back via the notification and in developer options
- Installing several drivers for the oppo
- Checking if the ADB connection is there , works, sideload works
- Pausing antivirus (Eset)
- Usb 3.0 and Usb 2.0 ports on the pc
Strange is that when the phone was running coloros everything worked instantly.
Omni is great but this is a problem, can still transfer files via adb and the FX app via wifi but it would be nice to have full speed the normal way via an usb cable and mtp.
Thanks for your help !
Magst64 said:
Running the latest Omni rom, and having problems connecting the phone to the pc for usb file transfer.
- Oppo find 7a running latest Nightly Omni rom with LVM
- Windows 10
The pc makes the connection sound but nothing shows up in the file explorer, under device an "android" device shows up but nothing there works either. I can see a "google nexus adb interface" in the hardware tab when running ptp and mtp.
Tried the following :
- Switching usb settings from charging to mtp / ptp and back via the notification and in developer options
- Installing several drivers for the oppo
- Checking if the ADB connection is there , works, sideload works
- Pausing antivirus (Eset)
- Usb 3.0 and Usb 2.0 ports on the pc
Strange is that when the phone was running coloros everything worked instantly.
Omni is great but this is a problem, can still transfer files via adb and the FX app via wifi but it would be nice to have full speed the normal way via an usb cable and mtp.
Thanks for your help !
Click to expand...
Click to collapse
Hi, do you use a N version of windows? In N versions the adb interface not works right. I had the same problem a few months ago, i went crazy until I detected the problem , install Windows 10 Pro, not N version, and everything works without drivers or anything.
roi_xordo said:
Hi, do you use a N version of windows? In N versions the adb interface not works right. I had the same problem a few months ago, i went crazy until I detected the problem , install Windows 10 Pro, not N version, and everything works without drivers or anything.
Click to expand...
Click to collapse
I am running windows 10 pro, so thats not that problem sadly.
Magst64 said:
I am running windows 10 pro, so thats not that problem sadly.
Click to expand...
Click to collapse
Damn, i cant understand it, i dont need drivers of any type, in my case was plug and play... Try to uninstall and delete in device manager any old adb interface, android usb driver, oppo driver, etc, restart and then connect the phone, windows should to install the drivers automatically.
Good luck
roi_xordo said:
Damn, i cant understand it, i dont need drivers of any type, in my case was plug and play... Try to uninstall and delete in device manager any old adb interface, android usb driver, oppo driver, etc, restart and then connect the phone, windows should to install the drivers automatically.
Good luck
Click to expand...
Click to collapse
Finally , after your remark i tried to disable and then remove the driver inclusive the driver software from my pc and after that it works ! Thanks for the hints Here the steps if anyone else got this problem , by the way also removed the antivirus that could have helped too.
- Connect oppo to usb 2.0
- Device manager : disable the android device with adb driver
- Device manager, delete driver
- unplug oppo
- replug , wait for install
- go to developer options , and switch usb from mtp to charging and back to mtp
Thanks
Once I installed the USB Mass Storage enabler zip on stock Lollipop, now whatever rom I flash (be it stock or custom), MTP is not working, though the PC detects the phone when it is connected through the usb.
Please help...
Driver is not installed duly
tamalnag said:
Once I installed the USB Mass Storage enabler zip on stock Lollipop, now whatever rom I flash (be it stock or custom), MTP is not working, though the PC detects the phone when it is connected through the usb.
Please help...
Click to expand...
Click to collapse
Employ USB driver tool by googling this would resolve your agony.
Regards,
689alza
alza689 said:
Employ USB driver tool by googling this would resolve your agony.
Regards,
689alza
Click to expand...
Click to collapse
Thanks for your reply, but drivers are already installed.
When I'm connecting to a different laptop running Windows 10 (where drivers are not installed), there the MTP is working normally.
But not in my laptop running Windows 7.
tamalnag said:
Thanks for your reply, but drivers are already installed.
When I'm connecting to a different laptop running Windows 10 (where drivers are not installed), there the MTP is working normally.
But not in my laptop running Windows 7.
Click to expand...
Click to collapse
Uninstall the drivers on the laptop with Win 7 and reboot the laptop, thereafter reinstall the drivers using the tool stated above for MTP . Occasionally the drivers are not installed duly (i.e. Device manager may not indicate the exclamation (We may presume the drivers are appropriately loaded,when in fact the contrary usually occurs) mark or error for the driver) but the transfer of data will be precluded.
Uninstall and reinstall the drivers for Win 7 laptop for resolution.
Thank you
689alza