Develop Bugs

Flash preceding firmware Omnia W

as you know you need a firmware prior to version "8107" to unlock the cell with windowsbreakme
I tried looking on the internet forum in English and I found this site where there is everything you need to flash with a lot of driving, but to me a mistake and maybe there's someone of you can help me (I hope)
remain to be ticked (I think) the boxes for the various image files, or pda, csc, phone, eboot .... but there is also the voice phone boot ....
CSC also box is not clickable, but once selected "pda" is also autoseleziona csc.
honestly I've checked all the boxes and 5 but it gives me error ...
if you do not select any cell, the cell will restart ... Who can help me??
please help me to unlock this omnia w!!
this is the screen with the errors
Uploaded with ImageShack.us

I can't see it right on screen but it looks like you are flashing a engeneering rom and it could be that you have a retail bootloader on phone and if that is right then you normally can't flash this rom

and what is the solution???

rroby92 said:
and what is the solution???
Click to expand...
Click to collapse
flash this: http://www.4shared.com/rar/pfoL3_uo/I8350XXKL1_DBTKL1_By_Anwar_009.html?

Just for me as WP beginner,
Will i be able to Unlock (Windowsbreak) my device after flashing this
and how to flash it?

esterhasi said:
Just for me as WP beginner,
Will i be able to Unlock (Windowsbreak) my device after flashing this
and how to flash it?
Click to expand...
Click to collapse
You can find more info here http://forum.xda-developers.com/showthread.php?t=1538801 ..

FocusHelp said:
You can find more info here http://forum.xda-developers.com/showthread.php?t=1538801 ..
Click to expand...
Click to collapse
Flash works, but I cant Windowbreak it

[q] stuck at 3 color screen

Hi.
i was updating my htc touch pro 2 (sprint),Ever thing was going fine and it stuck at 0%
i saw error on my desktop computer (FLASH WRITE ERROR)
so i do a soft reset
all i got now is 3 color screen
NEED HELP TO AGAIN MAKE IT WORK
Sorry for my bad english
THANKS ,
WAITING FOR REPLY

What are you trying to flash?
Are you doing it via SD or via PC? I would assume via PC since you got an error on your PC...
Can you try flashing via SD?

Did you unlock your phone? Did you try to load the stock rom?
You can probably just put the stock rom on the sd card, and load from there.

REPLY
i was updating not flashing
i thing my phone is already unlock i am using it in Pakistan
i try from PC to update
what is SD method and where to find stock rom ?
THANKS FOR THE QUICK RESPONCE

sufian9647 said:
i was updating not flashing
i thing my phone is already unlock i am using it in Pakistan
i try from PC to update
what is SD method and where to find stock rom ?
THANKS FOR THE QUICK RESPONCE
Click to expand...
Click to collapse
Oh, I see... in Pakistan means your phone is unlocked...
You were updating, not flashing....
How silly of me....:silly:
Sigh....
http://forum.xda-developers.com/showthread.php?t=550691

Do i need to do hard-spl
where to find ROM and what mean by root of SD CARD
My phone is already at 3 color screen as u know so do i have to enter boot loader by manual ?
THANKS FOR QUICK RESPONSE :good:

sufian9647 said:
Do i need to do hard-spl
where to find ROM and what mean by root of SD CARD
My phone is already at 3 color screen as u know so do i have to enter boot loader by manual ?
THANKS FOR QUICK RESPONSE :good:
Click to expand...
Click to collapse
What ROM were you flashing before? Just use that one.
wizardknight, look at the screenshot... he's already HSPL'd.
Root of SD card == no folders. 0 folders. Just put the file on the SD card. Not within a FOLDER.

RUU_Rhodium_S2_HTC_Europe_2.07.401.1_Radio_Rhodium_4.49.25.91_Signed_Ship
is the name of file which i use to update ,but its a computer file,how can i use it by putting in SD CARD ?
its a application file,i cant ever extract it

arrrghhh said:
wizardknight, look at the screenshot... he's already HSPL'd.
Click to expand...
Click to collapse
Never said he wasn't.I said the physical location of the phone had no relevance to the locked or unlocked state of the phone.
That would like saying cars can only go fast if they are in France. Completely illogical.
.
---------- Post added at 07:18 PM ---------- Previous post was at 07:18 PM ----------
sufian9647 said:
RUU_Rhodium_S2_HTC_Europe_2.07.401.1_Radio_Rhodium_4.49.25.91_Signed_Ship
is the name of file which i use to update ,but its a computer file,how can i use it by putting in SD CARD ?
its a application file,i cant ever extract it
Click to expand...
Click to collapse
Try 7zip. It will open almost any container file.

i rename the file ruu_signed.nbh to rhodimg.nbh
and put it in SD card root
and start the boot loader
i push the power button to install the update
but got ERROR
SEE THE ATTACHED PIC TO SEE ERROR

sufian9647 said:
i rename the file ruu_signed.nbh to rhodimg.nbh
and put it in SD card root
and start the boot loader
i push the power button to install the update
but got ERROR
SEE THE ATTACHED PIC TO SEE ERROR
Click to expand...
Click to collapse
Hm, it's trying to flash the bootloader... What ROM is this you are trying to flash? It might be a stock ROM which is not appropriate for your device...
wizardknight said:
Never said he wasn't.I said the physical location of the phone had no relevance to the locked or unlocked state of the phone.
That would like saying cars can only go fast if they are in France. Completely illogical.
Click to expand...
Click to collapse
I don't think logic has anything to do with this.... I don't think it ever did my friend, lol.

my mobile is of sprint,i think at start of this thread i put image of my mobile
RUU_Rhodium_S2_HTC_Europe_2.07.401.1_Radio_Rhodium _4.49.25.91_Signed_Ship
this is the file which i downloaded from htc website
i extract it with zip 7
direct me to the link of rom which can work on my device

If this is a Sprint RHOD. Then it should be a Rhod400.
Your screenshot does not show RHOD400.
If it is a sprint RHOD400, then this thread has CDMA wm roms in it.
http://forum.xda-developers.com/showthread.php?t=686903

on my touch pro 2 there in no logo of sprint
but when i power on it display the sprint logo
my question is that is my phone have sprint rom ?
and in pakistan ppcgeek website in block,so i cant access it
u have see the condition of my mobile before and after updating through SD card method also
in my attachment images
did u notice during updating from SD card method it give BOOT LOADER - ERROR
plz help me ,my phone is in this condition almost 1 month

You don't know what kind of phone you have for sure, you don't know what rom was on it for sure, you don't know what rom should be on it, you can't download roms, and you are about 5000 miles away. What do you want us to do?
Go find a repair shop. We can't help you.

i am using touch pro 2
it have sprint ROM Wm 6.5
i have recently downloaded ROM but it give BOOT LOADER ERROR
should i try other ROM also
what can be the cause of BOOT LOADER ERROR,is it due to wrong ROM VERSION ?
I HAVE CONSULTED 2 repair shop they keep my mobile for a week and then return it,
because in Pakistan we have shortage of electricity,so repair shop cant give time to my mobile.

sufian9647 said:
i am using touch pro 2
it have sprint ROM Wm 6.5
i have recently downloaded ROM but it give BOOT LOADER ERROR
should i try other ROM also
what can be the cause of BOOT LOADER ERROR,is it due to wrong ROM VERSION ?
I HAVE CONSULTED 2 repair shop they keep my mobile for a week and then return it,
because in Pakistan we have shortage of electricity,so repair shop cant give time to my mobile.
Click to expand...
Click to collapse
You still have not told us what phone you have. There are at least 5 types of touch pro 2s + some knock off ones.
Sprint rom WM 6.5 does not tell us what rom you are running,
If you downloaded a rom amd it gave you boot loader error, then it must not work on your phone.
I suggest that you find another repair shop that will be able to fix your phone in less than a week, or just buy a new phone.
Good luck. You are going to need it.

i will try next 24 hour to make it run
i will try ROM from the link
http://forum.xda-developers.com/showthread.php?t=686903
but if still failed i will find better repair shop

when i try to download a ROM it give me error
(The file link that you requested is not valid.)
WHAT SHOULD I DO
waiting for your response
THANKS

sufian9647 said:
when i try to download a ROM it give me error
(The file link that you requested is not valid.)
WHAT SHOULD I DO
waiting for your response
THANKS
Click to expand...
Click to collapse
Download another ROM/find another link?
This device is getting quite old now, so it will become infinitely more difficult to find the appropriate files, with valid links.
Good luck.

GT-N7100 Android 4.1.2 problem

Hi all im having a problem with my factory unlocked n7100 i have downloaded the latest united kingdom 4.1.2 from the firmware section and flashed the 3 pda/csc/modem files with odin everything went fine but when the phone reboots i get two error messages (unfortunately process com.android.phone has stopped) & (unfortunately messaging has stopped) i have cleared cache and did a factory restore but the problem is still there the message app just crashes it is a fresh install no back ups and never been rooted also when i connect it to kies it says it is unable to update the version of firmware thats currently on my device i would like to use kies or OTA updates in the future any help would be much appreciated i have been searching for hours to no avail.

Try reading through Dr Kevin's threads again, just to be sure. Re-download the rom you want, from a different source and double check the MD5. Doesn't sound permanent, just a bad flash. Make sure you wipe everything again.

Thanks for the reply i re-downloaded the the same firmware again from sammobile incase somehow it became corrupted the first time with no luck same result could you point me to another sourse to download firmwares i have tried a similar firmware from another site but it on gave me the one file instead of the three which i flash with pda within odin but the problem was still there

Dean_M said:
Thanks for the reply i re-downloaded the the same firmware again from sammobile incase somehow it became corrupted the first time with no luck same result could you point me to another sourse to download firmwares i have tried a similar firmware from another site but it on gave me the one file instead of the three which i flash with pda within odin but the problem was still there
Click to expand...
Click to collapse
There's a link it here... http://androidromupdate.com/2013/04...much-smoother-android-4-1-2-jelly-bean-build/
Might the same as the Sammobile but if the MD5 checks out, it should be fine.
Sent from my GT-N7100 using XDA Premium 4 mobile app

I have tried the firmware given and several others from different sources still no luck i have noticed that all the official roms i have downloaded came as one file which i placed in pda slot on odin and flashed but the the first 4.1.2 firmware came as 3 parts pda/modem/csc it was after i flashed that rom i notced the problem with both error messages so maybe its something todo with the modem/csc files that were flashed ? I cant find another BTU firmware with 3parts to reflash i have also tried other region firmware

Dean_M said:
I have tried the firmware given and several others from different sources still no luck i have noticed that all the official roms i have downloaded came as one file which i placed in pda slot on odin and flashed but the the first 4.1.2 firmware came as 3 parts pda/modem/csc it was after i flashed that rom i notced the problem with both error messages so maybe its something todo with the modem/csc files that were flashed ? I cant find another BTU firmware with 3parts to reflash i have also tried other region firmware
Click to expand...
Click to collapse
Once you flash the firmware, go to recovery mode and Wipe Data/Cacde... Make sure that you have backup of the phone contents.

AlanDS said:
Once you flash the firmware, go to recovery mode and Wipe Data/Cacde... Make sure that you have backup of the phone contents.
Click to expand...
Click to collapse
I have wiped cache and data after every flash and did a full factory reset still the same two error messages there is notting on the device its a clean install they pop up at the welcome screen where you select language ?

Dean_M said:
I have wiped cache and data after every flash and did a full factory reset still the same two error messages there is notting on the device its a clean install they pop up at the welcome screen where you select language ?
Click to expand...
Click to collapse
The one file has all the other files like modem,csc in it.. This kind of error usually happens if the data is not wiped out. But as you said you have already done that several times, I don't know what might be the problem..
As you said that you are having unlocked N7100, I hope you downloaded this file http://www.hotfile.com/dl/229498497/9ffa6b9/N7100XXDME6_N7100OXXDME2_BTU.zip.html

Yes thats what i thought that all files were included in the one yes that is the exact one i have on it now i also tried it from different sources just typed *#1234# into the dialler what i have is ap: N7100XXDME6 CP:N7100XXDME4 CSC:N7100XXDME2 ? I appreciate the Help

AlanDS said:
Once you flash the firmware, go to recovery mode and Wipe Data/Cacde... Make sure that you have backup of the phone contents.
Click to expand...
Click to collapse
I think when you flash first time with 3 different files has something wrong,install check fus & also logs from *#1234#, if you post here can be more helpful.
---------- Post added at 10:30 AM ---------- Previous post was at 10:29 AM ----------
Dean_M said:
Hi all im having a problem with my factory unlocked n7100 i have downloaded the latest united kingdom 4.1.2 from the firmware section and flashed the 3 pda/csc/modem files with odin everything went fine but when the phone reboots i get two error messages (unfortunately process com.android.phone has stopped) & (unfortunately messaging has stopped) i have cleared cache and did a factory restore but the problem is still there the message app just crashes it is a fresh install no back ups and never been rooted also when i connect it to kies it says it is unable to update the version of firmware thats currently on my device i would like to use kies or OTA updates in the future any help would be much appreciated i have been searching for hours to no avail.
Click to expand...
Click to collapse
I think when you flash first time with 3 different files has something wrong,install check fus & also logs from *#1234#, if you post here can be more helpful.

jdomadia said:
I think when you flash first time with 3 different files has something wrong,install check fus & also logs from *#1234#, if you post here can be more helpful.
---------- Post added at 10:30 AM ---------- Previous post was at 10:29 AM ----------
I think when you flash first time with 3 different files has something wrong,install check fus & also logs from *#1234#, if you post here can be more helpful.
Click to expand...
Click to collapse
Screenshots of both logs

Dean_M said:
Screenshots of both logs
Click to expand...
Click to collapse
Product code is for Ireland,if someone using BTU from UK can check their product code matching with yours.

jdomadia said:
Product code is for Ireland,if someone using BTU from UK can check their product code matching with yours.
Click to expand...
Click to collapse
What does that mean i cant use BTU ? I searched for official roms matching (Eir) but i could only find branded carrier firmwares for ireland i thought i could use any region rom once it had multi csc ?

Dean_M said:
What does that mean i cant use BTU ? I searched for official roms matching (Eir) but i could only find branded carrier firmwares for ireland i thought i could use any region rom once it had multi csc ?
Click to expand...
Click to collapse
Usually the product code is set when you Factory reset your phone in Recovery mode.. In your case it has not changed.
I checked in the Sammobile for Ireland based roms. But all seems to be carrier branded. So BTU rom should ideally work as it contains EIR CSC

Dean_M said:
What does that mean i cant use BTU ? I searched for official roms matching (Eir) but i could only find branded carrier firmwares for ireland i thought i could use any region rom once it had multi csc ?
Click to expand...
Click to collapse
U can use BTU if your mobile is INTENATIONAL, my meaning was about product code showing last 3 digit & trying to figure out problem,btw u download from below link than it must be correct.
http://www.sammobile.com/firmwares/3/?download=15762

jdomadia said:
U can use BTU if your mobile is INTENATIONAL, my meaning was about product code showing last 3 digit & trying to figure out problem,btw u download from below link than it must be correct.
http://www.sammobile.com/firmwares/3/?download=15762
Click to expand...
Click to collapse
I remember having to change csc with an app when i was on 4.1.1 so i could update it in kies but i have tried several firmwares the last two days when i boot into recovery it seems to always load multi csc & (Eir) Yes that is first firmware i download after i flashed it i noticed the problem seems i have tried everything but with no luck still getting both errors on the welcome/select language screen

Dean_M said:
I remember having to change csc with an app when i was on 4.1.1 so i could update it in kies but i have tried several firmwares the last two days when i boot into recovery it seems to always load multi csc & (Eir) Yes that is first firmware i download after i flashed it i noticed the problem seems i have tried everything but with no luck still getting both errors on the welcome/select language screen
Click to expand...
Click to collapse
Try one more thing,connect to kies & from tools select firmware upgrade & initialization,keep serial number handy which u will find under battery.good luck

jdomadia said:
Try one more thing,connect to kies & from tools select firmware upgrade & initialization,keep serial number handy which u will find under battery.good luck
Click to expand...
Click to collapse
I have also tried that in kies got the same two errors after it completed anyway thanks for trying your help is much appreciated hopfully someone with the same experience can point me in the right direction

Dean_M said:
I have also tried that in kies got the same two errors after it completed anyway thanks for trying your help is much appreciated hopfully someone with the same experience can point me in the right direction
Click to expand...
Click to collapse
Yes Sure someone more knowledgeable can help,you can PM your problem to Dr.Ketan (Search in this forum) he is rely genius.

Look my signature for N7100 toolbox, find PIT and download it
extract to .pit
Flash that PIT for PIT tab of odin (selecting pit will auto select re partition optiuon, keep it selected)
Again repeat but this time along with ROM file (single file ROM also enough). Rom file for PDA and pit file for PIT
Flash and report back.

i747 Hard Bricked: QHSUSB - DLOAD : Needing a debrick.img

SGH-I747 (4.1.2 i747's please)/ SGH-i747m( If you have a official 4.3 i747m, please post a debrick.img) only:
Hi, I recently hard bricked my phone into QHSUSB DLOAD and I am going to attempt repairing it through the SD Card boot method.
http://forum.xda-developers.com/editpost.php?do=editpost&p=47431259
I need a debrick.img to flash to the SD card in a Linux OS.
I would have gotten it myself but my phone is obviously dead. I found one before on XDA, but it did not work on my device and it gave me an error in the Linux terminal when it should not have.
-snip-
The end of the 3rd boot-loader stage in mmcblk0 is at 77.3 megabytes. If you are going to help out using your device, try to refrain from uploading an image with a different ROM other than root.
Code:
dd if=/dev/block/mmcblk0 of=/sdcard/backup.img bs=2m count=81054925
The count is the amount of bytes. I am not sure if it is meant to be 1000 bytes=kilobyte or 1024 bytes=kilobyte. The count above is for 1024.
I need someone to install the Galaxy S III unified toolkit, and pull the first 7 partitions from mmcblk0 ,which is where the third bootloader stage ends.(Don't upload a heavily modified device please) http://www.skipsoft.net/?page_id=213 Once you get the files, PM me.
If anyone has a link to a working one, please post that. If you want to get your own image to help me, go ahead.
Thanks guys.

Sorry for the bump... I just need the device running again since the state it's in, it CAN be unbricked.

99ytrewq9111 said:
Sorry for the bump... I just need the device running again since the state it's in, it CAN be unbricked.
Click to expand...
Click to collapse
what happened?

winosxbuntu said:
what happened?
Click to expand...
Click to collapse
I tried to unlock what I thought was a locked bootloader(I could only enter bootloader through ADB)
I found an article that says ezunlock works on all S III's.
It corrupted my bootloader,and my phone gives off no signs of life except "Device QHSUSB-DLOAD not recognized" when plugged in.
This means the motherboard/processor wasn't able to boot from the hard disk, so then it tries the SDcard if it matches the phone close enough.
I need someone to use their rooted i747 to dump the first 77.3 megabytes of "mmcblk0". That contains the firmware and bootloaders. With that, i can burn it to an sdcard in a linux operating system and plug it into my phone.

99ytrewq9111 said:
Sorry for the bump... I just need the device running again since the state it's in, it CAN be unbricked.
Click to expand...
Click to collapse
99ytrewq9111 said:
I tried to unlock what I thought was a locked bootloader(I could only enter bootloader through ADB)
I found an article that says ezunlock works on all S III's.
It corrupted my bootloader,and my phone gives off no signs of life except "Device QHSUSB-DLOAD not recognized" when plugged in.
This means the motherboard/processor wasn't able to boot from the hard disk, so then it tries the SDcard if it matches the phone close enough.
I need someone to use their rooted i747 to dump the first 77.3 megabytes of "mmcblk0". That contains the firmware and bootloaders. With that, i can burn it to an sdcard in a linux operating system and plug it into my phone.
Click to expand...
Click to collapse
find a download link for this http://forum.xda-developers.com/showthread.php?t=1746665 (samsung galaxy s3 toolkit) which can help you fix your phone
if that does not help take it to mobiletechvideos.com and they will fix it for you REASONABLE PRICE
its XDA you will get the help you deserve PLUS i have never encounted that kind of problem HOPE TO GOD IDONT but again am sure an SD-CARD that can write firmware/system IS VALUABLE/USEFULL compared to nothing and that means there is hope left to fix bad code :laugh:

winosxbuntu said:
find a download link for this http://forum.xda-developers.com/showthread.php?t=1746665 (samsung galaxy s3 toolkit) which can help you fix your phone
if that does not help take it to mobiletechvideos.com and they will fix it for you REASONABLE PRICE
its XDA you will get the help you deserve PLUS i have never encounted that kind of problem HOPE TO GOD IDONT but again am sure an SD-CARD that can write firmware/system IS VALUABLE/USEFULL compared to nothing and that means there is hope left to fix bad code :laugh:
Click to expand...
Click to collapse
Thanks for that link! It looks very promising, and I can probably find a stock boot.IMG in there. I will work on tomorrow. If I succeed, I'll edit the OP and make a debrick guide for this drvice forum. A word of advice, try not to mess with your bootloader or you end up like me

winosxbuntu said:
find a download link for this http://forum.xda-developers.com/showthread.php?t=1746665 (samsung galaxy s3 toolkit) which can help you fix your phone
if that does not help take it to mobiletechvideos.com and they will fix it for you REASONABLE PRICE
its XDA you will get the help you deserve PLUS i have never encounted that kind of problem HOPE TO GOD IDONT but again am sure an SD-CARD that can write firmware/system IS VALUABLE/USEFULL compared to nothing and that means there is hope left to fix bad code :laugh:
Click to expand...
Click to collapse
Hi, the toolkit didn't fix my phone, but its defiantly a step up. Since I'm assuming you have the toolkit installed that you suggested it, could you do me a favor?
It will be a bit easier using the toolkit to extract the partition files. If you could pull the first 7 partitions from "mmcblk0" of your device through the toolkit, it will probably set the next step to fix my phone. (Assuming you have a 16g i747... I don't really know)
You don't have to do this of course.
Thanks man.

Bump. Can anyone help out? All I need is the first 7 partitions.
Sent from my GT-I9300 using xda app-developers app

99ytrewq9111 said:
Bump. Can anyone help out? All I need is the first 7 partitions.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
either try using this link http://forum.xda-developers.com/showpost.php?p=27239761 am pretty sure it works for all S3 models, either way on the I747 forum it has been removed, the download link does not work........ so use this
it will work, it may not work but for the time being use this toolkit and also search forums or Google on how to fix this without, i think i found some answers after i had an emmc brick with my S2 but i did not have an SD card to re-write firmware to work again on my phone so i bought the S3 and its awesome

winosxbuntu said:
either try using this link http://forum.xda-developers.com/showpost.php?p=27239761 am pretty sure it works for all S3 models, either way on the I747 forum it has been removed, the download link does not work........ so use this
it will work, it may not work but for the time being use this toolkit and also search forums or Google on how to fix this without, i think i found some answers after i had an emmc brick with my S2 but i did not have an SD card to re-write firmware to work again on my phone so i bought the S3 and its awesome
Click to expand...
Click to collapse
The problem is I need a working phone to pull the partitions. :/ I tried to use the boot image, but it had an error writing while in the linux.

99ytrewq9111 said:
The problem is I need a working phone to pull the partitions. :/ I tried to use the boot image, but it had an error writing while in the linux.
Click to expand...
Click to collapse
This one worked for me http://forum.xda-developers.com/showpost.php?p=46258374&postcount=172

I have a similar problem Hard Bricked after update to 4.3 tried to flash my phone Backup 4.1.2 and died can not log in or recovery nor danlold.Is there any solution.

Bradkirk said:
This one worked for me http://forum.xda-developers.com/showpost.php?p=46258374&postcount=172
Click to expand...
Click to collapse
Did you use an i747 or a i747m device?
If a i747m image works on an i747, it will basically fix all of my problems.

spensa said:
I have a similar problem Hard Bricked after update to 4.3 tried to flash my phone Backup 4.1.2 and died can not log in or recovery nor danlold.Is there any solution.
Click to expand...
Click to collapse
What message appears on your computer when you plug it in?
If it says QHSUSB-DLOAD, you are in faint light.
It stands for Qualcomm High Speed USD Download Mode.
What is means that your processor(qualcomm), is trying to boot, but it cannot find proper drivers for the hardware.
It will then look for something to boot from in the SDcard.
Here is a thread on how some other people were able to do it : http://forum.xda-developers.com/showthread.php?t=2439367

I have an I747M technically. I went for an actual I747M image just in case there was a slight difference. in the thread that one came from though there should be one for the actual att device if you look through it.
and just to confirm, yes the phone was blank and unresponsive. showing up as QHSUSB-DLOAD before i loaded that img onto my external SDcard. and I am using the same phone currently.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

Bradkirk said:
I have an I747M technically. I went for an actual I747M image just in case there was a slight difference. in the thread that one came from though there should be one for the actual att device if you look through it.
and just to confirm, yes the phone was blank and unresponsive. showing up as QHSUSB-DLOAD before i loaded that img onto my external SDcard. and I am using the same phone currently.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Unfortunately that's the download I found that didn't work.
Thanks for trying though

damn! the only other help I can offer then, is that there is a pretty good thread on this over in the d2tmo section. someone there wrote a little tool to easily download the relevant data. might help you on your quest. or at least make it so you could ask someone that doesnt know ADB. best of luck!
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

99ytrewq9111 said:
What message appears on your computer when you plug it in?
If it says QHSUSB-DLOAD, you are in faint light.
It stands for Qualcomm High Speed USD Download Mode.
What is means that your processor(qualcomm), is trying to boot, but it cannot find proper drivers for the hardware.
It will then look for something to boot from in the SDcard.
Here is a thread on how some other people were able to do it : http://forum.xda-developers.com/showthread.php?t=2439367
Click to expand...
Click to collapse
when connected to the computer written QHSUSB-DLOAD,

spensa said:
when connected to the computer written QHSUSB-DLOAD,
Click to expand...
Click to collapse
OK , take out your battery and tell me your model number(Behind battery). And what phone company do you use?
Did you possibly save a NANDROID on a computer?
( if you have i747m, you can fix your phone, but its hard to do( I havnt done it yet)
Download this image http://forum.xda-developers.com/showpost.php?p=46258374&postcount=172 (thanks to @Bradkirk )
Follow these directions using that image above^^^ http://forum.xda-developers.com/showthread.php?t=2439367
You need to install a Linux operating system (Ubuntu works) to run the commands.
Edit:! According to the T-Mobile thread, you might need a debrick.IMG from a phone on 4.3
Once I know your phones model number, I can edit the main post and ask for you phone model's images.

99ytrewq9111 said:
OK , take out your battery and tell me your model number(Behind battery). And what phone company do you use?
Did you possibly save a NANDROID on a computer?
( if you have i747m, you can fix your phone, but its hard to do( I havnt done it yet)
Download this image http://forum.xda-developers.com/showpost.php?p=46258374&postcount=172 (thanks to @Bradkirk )
Follow these directions using that image above^^^ http://forum.xda-developers.com/showthread.php?t=2439367
You need to install a Linux operating system (Ubuntu works) to run the commands.
Edit:! According to the T-Mobile thread, you might need a debrick.IMG from a phone on 4.3
Once I know your phones model number, I can edit the main post and ask for you phone model's images.
Click to expand...
Click to collapse
I took it to a service to repair

i9192 hard bricked

My i9192 s4 mini got hard bricked while charging I don't know how or why it happened..
I found this somewhere in the forum.. can anyone make me a dump file for i9192 because I don't know anyone who has the same phone as me so I'm asking for help. I tried to bring it to a programmer but they said they have to j-tag it for 3days up to a week. but I don't want to leave my phone on other people's hand so I'd rather fix this myself.
help would be really really appreciated. TIA
initial situation:
- we have a brick with killed bootloader after unsuccessful flashing, not turning on, no reaction on buttons, no any mode available (recovery, download).
What is needed:
- any Linux, like Ubuntu, but more convinient is PartedMagic of any version;
- MicroSD card;
- working phone of the same model or dump of its first 139008 blocks (about 70MB).
How to make a dump:
- on rooted device download from Google Play app "TerminalEmulator" and run it;
- Enter su, appears "[email protected]:/ #", enter "dd if=dev/block/mmcblk0 of=sdcard/mmcblk0uptop7.img count=139008";
- after completion copy file "mmcblk0uptop7.img" from the phone to PC, for example to drive C:/.
How to revive the phone:
- insert MicroSD into PC and launch "PartedMagic";
- copy dump to MicroSD, for this open Terminal, we see "[email protected]:~#", enter "dd if=/media/WIN7/mmcblck0uptop7.img of=/dev/mmcblk0", where "/media/WIN7/" - it's your drive C:/, where stored a dump, and "/dev/mmcblk0mmcblk0" - your MicroSD in PartedMagic;
- wait for completion, remove MicroSD;
- put MicroSD to non-working phone, connect the phone to PC using USB;
- if all steps are done correctly, phone will boot by pressing the keys, using bootloader from external MicroSD;
- now it is possible to re-flash internal eMMC using Odin, to make a possibility to remove external card;
- that's all, phone completely revived.
Supported devices:
- tested on i9190, will work on i9192/i9195, should work on smartphones of other brands with new Qualcomm chips.
Technical details:
- details are too big to write. If you are interested - read about MSM8930 boot architecture and etc.
Some conclusions:
- Qualcomm has made a good modern chip, with a lot of feasibility, but not placing many information to open sources;
- Samsung - trying to complicate life of users by integrating of its own digital signature, what is leading to immediate bricking of devices when trying to modify bootloader. Be careful.
Click to expand...
Click to collapse
Update:
Please try to send me an unbrick.img file from a stock i9192 that came from Saudi.. but if not from Saudi at least a stock ones..
If someone could send me a full or even half image file from a i9192 stock device
thank you.

I just need the "make a dump" part.

Bcoz of knox m not rooting my phone but I really want to help you
Is there any othet way to make dump file without a rooted device?

NafeesTyagi said:
Bcoz of knox m not rooting my phone but I really want to help you
Is there any othet way to make dump file without a rooted device?
Click to expand...
Click to collapse
I don't know if there's another way tho. but thanks anyway. even my phone is not rooted. I'll bring it to a service center today but I doubt they can get it fixed because the warranty of my phone is in another country and I'm in the Philippines right now. probably I will have to pay for it if they try to fix it but it's gonna be expensive.. I just want to save some bucks and try to fix it myself but unfortunately I don't have another phone like this one to do that, neither my friends.
EDIT:
Unfortunately they keep refusing to J-TAG my unit.. they said that they don't have software to j-tag i9192.

I'll upload mine when I get to the office
Sent from my GT-I9192 using Tapatalk

fburgos said:
I'll upload mine when I get to the office
Sent from my GT-I9192 using Tapatalk
Click to expand...
Click to collapse
Thanks!! I hope I can fix my phone.. it's been a month since I last used it.

here you go, its from a the latest firmware
https://www.dropbox.com/s/89yodahtvig6lhc/debrick.img

fburgos said:
here you go, its from a the latest firmware
https www . dropbox . com s 89yodahtvig6lhc debrick.img
Click to expand...
Click to collapse
Thank you bro! is that from i9192?.. gonna update if I fixed my phone so ppl who has same problem will be able to use this thread.
EDIT: IT has some improvements its vibrating now when I plug it in my PC but the problem is ODIN won't detect my phone. Hmm

Hi I have some improvements but I could not flash my phone.. it keeps failing on ODIN, sorry im just a newbie on this kind of stuff and still learning.. I used the stockfirmware which is the md5 file that is 1.4gb for my phone is that the right one for the bootloader?
its like this
BOOT RECOVERY MODE
CHECK BOOT PARTITIONS
COPY FROM T-FLASH
BOOT RECOVERY
WRITE 139008 SECTORS
FLASH WRITE FAILURE
ddi : mmc_read failed
ODIN MODE
PRODUCT NAME: GT-I9192
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enabled

now that you have a debrick image follow this guide , hope it helps.
http://forum.xda-developers.com/showthread.php?t=2600869
btw you don't need to follow step 2.2 of that guide

dovakinn said:
now that you have a debrick image follow this guide , hope it helps.
http://forum.xda-developers.com/showthread.php?t=2600869
btw you don't need to follow step 2.2 of that guide
Click to expand...
Click to collapse
same thing happened still on that root recovery mode.. the problem is I'm stuck at flashing my phone.. probably the problem is the version of the firmware @jburgos gave me.. I need to know what version is his firmware and where it came from so I can download the stock firmware for that version.

can you get into download mode ?? a quick glance a jburgos proflie shows he is most likely using a Latin American firmware , though i really doubt that it will make diffrence, if you can get into download mode you can try flashing it again with your stock firmware.
by mistake i had deleted my image file and right now i am on a really bad connection uploading another image will tale me 3 days

dovakinn said:
can you get into download mode ?? a quick glance a jburgos proflie shows he is most likely using a Latin American firmware , though i really doubt that it will make diffrence, if you can get into download mode you can try flashing it again with your stock firmware.
by mistake i had deleted my image file and right now i am on a really bad connection uploading another image will tale me 3 days
Click to expand...
Click to collapse
I can't get into download mode.. btw mine is the Saudi Arabia version..
Its not download mode and I took a picture of it so you guys can see:
BOOT RECOVERY MODE
CHECK BOOT PARTITIONS
COPY FROM T-FLASH
BOOT RECOVERY
WRITE 139008 SECTORS
FLASH WRITE FAILURE
ddi : mmc_read failed
ODIN MODE
PRODUCT NAME: GT-I9192
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enabled
Man I'm stuck.. I thought I had it but its not flashing through root recovery mode

I wonder if I need the exact same phone as dump, or I need a longer address on dump, anymore opinion guys I'm kinda getting annoyed on my phone. idk what is root recovery mode either..
I'm currently stuck on Boot Recovery Mode that has no android logo.. can't go to download mode.
If someone could send me a full or even half image file from a i9192 stock device it would be very helpful.

this is the rom i used for the image, http://forum.xda-developers.com/showthread.php?t=2620621
i have another image from a past firmware but its at home and i dont the firmware version

fburgos said:
this is the rom i used for the image, http://forum.xda-developers.com/showthread.php?t=2620621
i have another image from a past firmware but its at home and i dont the firmware version
Click to expand...
Click to collapse
which model did u use tho?
I'm stuck at boot recovery mode I can't go to download mode.. I hope someone who has stock rom will share their .img file.. but still I'm going to download that custom rom and try to flash it.

jhetz09 said:
which model did u use tho?
I'm stuck at boot recovery mode I can't go to download mode.. I hope someone who has stock rom will share their .img file.. but still I'm going to download that custom rom and try to flash it.
Click to expand...
Click to collapse
mi device its a i9192 from panama
sorry to hear didnt work, i use this guide to get the debrick.img,
[HARD BRICK ?] - I919x - Make your debrick.img and have it on extSdCard by security http://forum.xda-developers.com/showthread.php?t=2625628
i have another .img but not with me, broke my screen, next week ill upload when i get my phone back, i think the other firmware was from ubmh1 odin firmware but im not shure wich firmware but im shure it was a stock samsung that came without knox
do you remember wich firmware was in your device, was a knox one?

fburgos said:
mi device its a i9192 from panama
sorry to hear didnt work, i use this guide to get the debrick.img,
[HARD BRICK ?] - I919x - Make your debrick.img and have it on extSdCard by security http://forum.xda-developers.com/showthread.php?t=2625628
i have another .img but not with me, broke my screen, next week ill upload when i get my phone back, i think the other firmware was from ubmh1 odin firmware but im not shure wich firmware but im shure it was a stock samsung that came without knox
do you remember wich firmware was in your device, was a knox one?
Click to expand...
Click to collapse
my device model is either
KSA-I9192XXUAMH3
KSA-I9192XXUBNB1
I dont think my phone is with knox

well finally i was on stable connection , here is the my debrick image this also made from the guide http://forum.xda-developers.com/showthread.php?t=2625628 suggest you use this to write to your SD http://forum.xda-developers.com/showthread.php?t=2600869 and if your cell boots try go imd into download mode and flash your stock rom ,
this from firmware I9192DDU1BML1 , btw this img was created after i had deleted knox and other bloat ware from the rom , hope it helps.
https://www.dropbox.com/s/i6ul61hisnvrjog/debrick.img

dovakinn said:
well finally i was on stable connection , here is the my debrick image this also made from the guide http://forum.xda-developers.com/showthread.php?t=2625628 suggest you use this to write to your SD http://forum.xda-developers.com/showthread.php?t=2600869 and if your cell boots try go imd into download mode and flash your stock rom ,
this from firmware I9192DDU1BML1 , btw this img was created after i had deleted knox and other bloat ware from the rom , hope it helps.
https://www.dropbox.com/s/i6ul61hisnvrjog/debrick.img
Click to expand...
Click to collapse
gonna try it.. thanks for sharing. gonna post if there's an improvement..
I'll consider this as my last resort.. ill send it to the seller since I still have warranty for this phone.. I never flashed or rooted this phone. but if I send it back it'll take a month to get it back.. but better than nothing.