Develop Bugs

[KERNEL] SP-ROOT - GT-I9000 ROOTED STOCK Kernels - by stock+ Team (ALL NEW VERSIONS!)

Hello everyone,
Stock+ Team ($omator & Grooby) are proud to bring you the latest rooted kernels based on samsung stock kernels that you may find in ROM by Samsung.
Why should i use this kernel?
Our kernels are uber-minimal modification of stock kernel used only for rooting (no custom recovery is installed). So the kernel it's like stock just rooted, and there is small chance (or any chance) that it will be detected as modified by service center at the first look
Please find latest of kernels listed below:
*NEW* ROOTED! I9000XXJW4 - Gingerbread (2.3.6) - CL: 1043937 - B.Date: 19-03-2012 - Download HERE!
Instructions:
1. Flash zImage.tar of choosen kernel using Odin (you will find it in package)
2. Profit!
What's included in this kernel
- Base image of kernel is 100% pure stock by samsung
- ClockworkMod Recovery added !
- Fully rooted (after flash you will have superuser and su installed)
Nothing more, nothing less - Enjoy!
If you like our modifications, support us with even a little donation for a beer -> Click to donate!
Don't forget to follow our service at Twitter (@SamsungUpdates) or (soon) Samsung-Updates.com
Best regards for CF for showing us the way and all XDA-DEVELOPERS members! we love ya!

This will be interesting. *[Subscribing]*

Thanks, I also prefer to use an stock kernel with the only addition of root features.
Lot of 2.3.5 custom kernels are based on 2.3.4 sources and also have tweaks that might do more bad than good.
Imho if those tweaks were so good samsung would have added them to their roms, it wouldn't be the first time they do that.
Enviado desde mi GT-I9000 usando Tapatalk

where it's ? no file posted

when its done, soonish =) tool is almost finished

ITs finished, download, test and let us know

Grooby said:
Hello everyone,
Stock+ Team ($omator & Grooby) are proud to bring you the latest insecure kernels based on stock kernels that you may find in ROM by Samsung.
Insecure kernels are uber-minimal modification of stock kernel used only for rooting (no custom recovery is installed). So the kernel looks/feels like stock.
Please find latest of kernels listed below:
JVU: Download HERE!
Instructions:
Code:
1. Flash zImage.tar of choosen kernel using odin (you will find it in package)
2. enable usb debugging in settings->applications
3. while still connected and odin/kies is turned off, run RUNME.BAT (also in package)
4. Install latest Superuser.apk from market!
5. Profit!
best regards to ChainFire for showing us the way!
and of course for all XDA-DEVELOPERS members! we love ya!
Click to expand...
Click to collapse
XWJVU?
10chars

Added next (looks like latest) kernel, and more details to them

hack the planet =)

ROOTED! I9000XFJVA - Gingerbread (2.3.5) - CL: 621561 - B.Date: Tue Oct 4 KST 2011 added for
[ROM] XFJVA - JVA_JV1_JVT.tar [04.10.2011] [ANDROID 2.3.5] [MULTICSC] [KIES]
Original ZIP from Kies GT-I9000 TSR (Serbia & Montenegro) TEST MODE

is it possible somehow to add CWM to these kernels?

These are suppoused to look/feel/work as oryginal kernels just with rooted by default. We are currently working on extending default recovery menu with some features invisible for a service eye but useful for flashing custom roms

Thank you man!
It's possible to add JVT?

JVT Added, enjoy!

added to first post ROOTED! I9000XXJVT - Gingerbread (2.3.5) - CL: 617736 - B.Date: Thu Sep 29 KST 2011
for [FIRMWARE] XXJVT Android 2.3.5 Build Date Sep 29 DOWNLOAD

thank you! great work!!!
is it possible to unroot???

yes by flashing stock kernel zImage - we will update first post with those later

hey
i flashed it and installed superuser.apk
rooting worked fine
however, when i downloaded rom manager from market for cwm... i try to flash in recovery but says theres an error
" E: failed to verify whole - file signature
E: signature verification failed
installation aborted
any ideas please ?

because there is no custom clockworkmod recovery installed
try installing rom manager and flashing recovery from there
youre looking for Flash ClockworkMod Recovery and pick i9000
MTD is for cyanogen so pick normal version
should work

actually thats wut ive done... and it gave me an error
but let me be sure
i run the runme.bat file from the extracted file on desktop while usb is still connected and kies not ?

[KERNEL]{S} Advanced Stock ICS Kernel Build 17 [08/12/12]

Advanced Stock ICS Kernel for Xperia S​Here is a kernel based on the Stock ICS kernel with some features which come from DoomLord's GB kernel.
Features
autorooting
CWM recovery (with reboot recovery support)
init.d support (thanks DoomLord)
TUN/TAP driver
Download links
Build 17 (Fastboot)
Build 17 (CWM)
Build 16 (Fastboot)
Build 16 (CWM)
Prerequisites
An unlocked bootloader: Tuto here.
A stock ICS ROM (6.1.A.0.452 to 6.1.A.2.55). Don't expect this kernel to work with CM9/10.
How to flash
For elf files :
Read DoomLord's guide
You just have to replace kernel.elf by the name of the downloaded kernel in the flash command (eg : ics4.elf)
For zip files:
Flash the zip file from the recovery
Changelogs
Build 17 (08/12/12) :
Merge 6.1.A.2.55 kernel sources
Autodetect rom version in default.prop based on build.prop
Updated recovery, adbd and busybox (JB version)
Build 16 (01/11/12) :
Random reboot issue probably fixed (patch from CM10 kernel, thanks Kali)
Rom version increased to 6.1.A.2.50
Updated recovery, adbd and busybox (JB version)
SD card mounted by default in recovery
Vibration at boot removed, only led and backlight now
Build 15 (05/09/12) : Increase ROM version in default.prop from 6.1.A.0.452 to 6.1.A.2.45
Build 14 :
New MMC driver (from codeaurora) : it fixes issue while formatting partitions in CWM
Wifi module built from source (in the ramdisk)
Updated recovery
Disable again hardware clock
Build 13 :
Backup / Restore fixed with dedupe
Backlight enabled in CWM
Better "reboot recovery" handling in adbd / busybox and recovery
Build 12 :
Updated recovery
Hardware clock correctly saved (from CM9 kernel)
Build 11 : Go back to GCC 4.4 (fix artifacts with camera preview)
Build 10 :
Kernel built with GCC 4.6
Several autoroot fixes (Superuser app pushed just once and correctly removed in /data)
Working reboot recovery command (with adb too)
Updated su (3.1.1) and Superuser (3.1.3)
A bunch of new command included in the new busybox (ifconfig, wget, vi, and many more !)
Build 9 :
Kernel built from sources
TUN/TAP driver included (for VPN)
Build 8 : Fix mass storage in CWM
Build 7 : Fix MTP
Build 6 : Key mapping in CWM fixed
Build 5 :
New recovery built from latest CM9 sources
Fixed generation of md5sum with nandroid
Increased font size in CWM
Boot partition backup and restore
New adbd built from CM9 sources (fixed an issue with hardcoded sh path in /system)
Build 4 :
Correct su binary
Don't wait 3 sec if /cache/recovery/boot exists
Build 3 :
Leds and vibrator at startup fixed
Sources
Ramdisk sources
Kernel sources
Credits
DoomLord : many thanks to him for its kernel and all his scripts.
championswimmer and sminki for their help
FreeXperia team for their work on CM

makes it perfectly start does not make any errors
greetings and thanks

yes it boots!
(maybe you can help with my Question here )

Hey, I also have tested several times to include recovery, but withut succes, didn't get any further then a booting kernel without recovery or vibration and LED on to enter recovery but no entering recovery and kernel that doesn't boot.
Please pm me if you want to work together, I saw your kernel is from ICX team? I know nick very well so I'd would be a pleasure to work with you too

sminki said:
yes it boots!
(maybe you can help with my Question here )
Click to expand...
Click to collapse
for this question and any other other question similar to this
head here
http://forum.xda-developers.com/showthread.php?t=1659584
it has menu driven process to extract and repack kernel.elf (ramdisk also can be extracted and packed )

Welcome Champ, good to see you mate.
I will leave the thread here as knowing you, you will have a kernel ready for us in a few hours.:fingers-crossed:

thanks for the test guys... so now i'm diving into including recovery....
good to know i could pull off kernel.elf editing in my first attempt lol
@colossus if not in hours, then definitely within 1 or 2 days
EDIT :
can someone send me the kernel.elf from FXP122 cm9 ??
will save me the time to download the whole ROM

This is sweet, good job!!

john9 said:
This is sweet, good job!!
Click to expand...
Click to collapse
Only a few files to edit now
We'll keep you updated
Sent from my LT26i using XDA

championswimmer said:
btw if anyone wishes to do this before me,
this diffstats should help you
https://github.com/championswimmer/xps-ramdisk/commit/a61969aefca00ce3a6e4e112e97403fb6f0c79e9
it shows how doomlord added recovery to gb kernel..
Click to expand...
Click to collapse
cool.. well that's a hell of a lot easier than the manual route I was taking. This was my goal, but for personal rather than pseudo "xda glory" as I'm working with DooM's stuff I didn't feel right posting it without his permission, but he's probably too busy to care
go for it championswimmer :victory:

Excuse my noob-ish question, but... what's the difference between a 'stock' kernel with recovery and a completely custom kernel like DoomLord's? Is it to do with core frequencies/governors?

fNOOB said:
Excuse my noob-ish question, but... what's the difference between a 'stock' kernel with recovery and a completely custom kernel like DoomLord's? Is it to do with core frequencies/governors?
Click to expand...
Click to collapse
Frequencies and governors are one possible customicing for kernels, for the most users the most important thing. also Kernel modifing can allows you init.d support, undervoltscripts and also allows (or denies) MSC support... and, for shure, clean out some tings, make things more efficiently and and and... a dev is nearly totaly free to create a very customiced kernel with or without special Driver support or so

noob.fl said:
Frequencies and governors are one possible customicing for kernels, for the most users the most important thing. also Kernel modifing can allows you init.d support, undervoltscripts and also allows (or denies) MSC support... and, for shure, clean out some tings, make things more efficiently and and and... a dev is nearly totaly free to create a very customiced kernel with or without special Driver support or so
Click to expand...
Click to collapse
Cheers mate

sminki said:
cool.. well that's a hell of a lot easier than the manual route I was taking. This was my goal, but for personal rather than pseudo "xda glory" as I'm working with DooM's stuff I didn't feel right posting it without his permission, but he's probably too busy to care
go for it championswimmer :victory:
Click to expand...
Click to collapse
using someone's work just because 'he's too busy to care' is not the aim which we at xda strive for ...
i've already talked with Doomlord regarding using his recovery... and as long as I clearly mention it's his work and provide links back to his thread, he has no issues with anyone else using it...
(and i'll surely do that ^^ when i release a kernel containing his recovery, if i ever do that)

championswimmer said:
using someone's work just because 'he's too busy to care' is not the aim which we at xda strive for ...
i've already talked with Doomlord regarding using his recovery... and as long as I clearly mention it's his work and provide links back to his thread, he has no issues with anyone else using it...
(and i'll surely do that ^^ when i release a kernel containing his recovery, if i ever do that)
Click to expand...
Click to collapse
cool, i was only making a bad joke, we all know DooM cares

sminki said:
cool, i was only making a bad joke, we all know DooM cares
Click to expand...
Click to collapse
lol.. ok
and i'll bring you some unicorns soon

championswimmer said:
lol.. ok
and i'll bring you some unicorns soon
Click to expand...
Click to collapse
I can't wait! :victory:

so this kernel has the ro.secure property in default.prop set to 0??

Tnaks mate for your job!
tested right now the test version and the sony logo fades and reboots

can you plug it into a pc and run a logcat from command prompt and give me the output of any comes??

[ROM] [PORT] Mooke OS for Callisto aka Galaxy 551

New Build Mokee osV2 final... coming soon
MOKEE OS
Hi! Again Mooke OS Port is Here for Callisto
i Port this rom for here link
SCREEN SHOTS..!! IN THE ATTACHMENTS
FEATURES.!!
-
Mokee Based - So lot of Options Built In
- Lightweight Keyboard (Multiling Keyboard)
-New 360 Launcher-HOT
-After install set ex contact and dialer as default
-App2sd patched Link
- Lewa's FM Radio Function
- Dark Blue Mi File Explorer
- MiUi AND Cm7 Camera
-Very Good Memo App
-ADDED MANY SCRIPTS FOR BATTERY AND TOUCH RESPONSE
-Very Good Battery Management App and many More
TIPS
- Enable both 16 Bit Transparancy and Allow Purging of Assets...
- Fix Permission after installation
Click to expand...
Click to collapse
BUGS AND ERRORS!!!
-APP2Sd Patch Link
-TILL NOW NOTHING EXCEPT FEW CHINESE WORDS IN SETTING LIKE CPU OVERCLOCK.
-FOR THIS USE NO-FRILLS..!!
-IT WILL TAKE 5 MINS TO BOOT DONT PANIC.
Working:
Swipe notifications(HOT)
Swipe settings
3D and 2D rendering
Boot successfully
Keyboard
Overclock
Camera
Bluetooth
WiFi
Very smooth
Nearly everything else
FLASH INSTRUCTIONS..
-DOWNLOAD THE ROM
-MOVE TO UR SD CARD
-REBOOT AND GO TO CWM
-DATA WIPE/CLEAR CACHE/CLEAR DALVIK-CACHE
-APPLY ZIP
-Mooke_os CallTST1.zip
-FLASH GAPPS
-AGAIN DATA WIPE/CLEAR CACHE
-REBOOT
How to flash App2sd patch..!
-mount data,system in cwm
-flash patch
-Reboot ( IT WILL REBOOT TWICE) DONT PANIC..!
Click to expand...
Click to collapse
THANX AND CREDITS
Ajay Base Rom
Mooke Os Rom for Fit by arhant
Mokee creators!
AND OF COURSE ME FOR PORTING IT FOR Callisto
Also Check Out my New Lewa Os Post (Stable Version)
Xperialized For CallistoNow Avaliable For Download
IF YOU LIKE MY WORK PLZ HIT THNX BUTTON..

ScreenShot
HereAre Some ScreenShot and Link
Link for the Rom : Build 1

now downloading first thanks anvesh!!!

Great rom anvesh...even better than ur joyOS this time...much option here in mokeeOS...
Also keybourd is looking good...u should add ss of it...
And thanks again for ur kind work for our device...
Sent from my GT-I5510 using xda premium

priyesh103 said:
Great rom anvesh...even better than ur joyOS this time...much option here in mokeeOS...
Also keybourd is looking good...u should add ss of it...
And thanks again for ur kind work for our device...
Sent from my GT-I5510 using xda premium
Click to expand...
Click to collapse
Thanks but i am also working for my callisto also but sharing my work only

anveshparashar said:
Thanks but i am also working for my callisto also but sharing my work only
Click to expand...
Click to collapse
Here small issue with this rom...if u notice than when we type words by physical and touch keypad than sometime words are not display on screen....
Edited:
Keyboard backlight is not working...
Sent from my GT-I5510 using xda premium

You are AWESOME!!!
Thank you so so so much!!!!!! great ROM!!! :good: :laugh:
It's ppl like you that want me to continue using this phone!
btw, one small help? i am new to this porting business.. i was trying to extract ajay's JB (cm 10) rom for using it as the base rom!
i am having problems during the extraction, probably the zip was not archived properly, is there any work around for this?
Thanks in advance!!

vvaklnprm said:
Thank you so so so much!!!!!! great ROM!!! :good: :laugh:
It's ppl like you that want me to continue using this phone!
btw, one small help? i am new to this porting business.. i was trying to extract ajay's JB (cm 10) rom for using it as the base rom!
i am having problems during the extraction, probably the zip was not archived properly, is there any work around for this?
Thanks in advance!!
Click to expand...
Click to collapse
ajay jb.zip as double named files such that on extracting they displace each other due to similar name it is due to addition of file in zip after compilation as for now cm7 is the most stable version

Cm10 zip
Good job! great rom.
If you want to extract cm10 you have to use linux, because for windows folder ''a'' and folder ''A'' is the same name.
bye

CM 10 ??
a lot of cm 7.2 roms have come recently..
will cm 10 roms come soon??

R: [ROM] [PORT] Mooke OS for Callisto aka Galaxy 551
I'm working on aokp...
Inviato dal mio GT-I5510 con Tapatalk 2

Wait till march
vvaklnprm said:
a lot of cm 7.2 roms have come recently..
will cm 10 roms come soon??
Click to expand...
Click to collapse
I m currently working for Stable CyanogenMod 10.1 for our Device

Waiting for its release....
Sent from my GT-I5510 using xda premium

please add soft button to status bar like in jellybread

Hi man,
I have tryed some of your Roms and i like much the interface but i wanted to ask you, do anyone supports ext4 and swap ?

brick?
I tried to flash the rom on my rooted callisto, but since then i´m stuck in a screen it say "indonesia cyanmobile squadzone"...it doesn`t seem to boot through......recovery is still there....any chance to "unbrick" it?
Got it fixed with ODIN an a proper official Firmware...and back to root try to start over tomorrow... any suggestions what was wrong ? i really would like to have this rom

Hondologe said:
I tried to flash the rom on my rooted callisto, but since then i´m stuck in a screen it say "indonesia cyanmobile squadzone"...it doesn`t seem to boot through......recovery is still there....any chance to "unbrick" it?
Got it fixed with ODIN an a proper official Firmware...and back to root try to start over tomorrow... any suggestions what was wrong ? i really would like to have this rom
Click to expand...
Click to collapse
1.have you fixed permission,cleared data cache etc....
2.which rom you are on
3.please make a nandroid before..
4.use the ajay cyanogenmod build 20121005 i find it most stable (my preference). all my build are based on it
5.if you downloaded corrupted zip test the zip for error
6. which version of cmw you use...they are two 5.xx.6 and 5.xx.8 i found .6 with usb mount faulty but nandroid backup is best and .8 with usb mount but i get nandroid restore faulty about 5/100 times
7.specific device error can also occur....

1
i got it ..THX

anveshparashar said:
1.have you fixed permission,cleared data cache etc....
2.which rom you are on
3.please make a nandroid before..
4.use the ajay cyanogenmod build 20121005 i find it most stable (my preference). all my build are based on it
5.if you downloaded corrupted zip test the zip for error
6. which version of cmw you use...they are two 5.xx.6 and 5.xx.8 i found .6 with usb mount faulty but nandroid backup is best and .8 with usb mount but i get nandroid restore faulty about 5/100 times
7.specific device error can also occur....
Click to expand...
Click to collapse
Right now im on Stock 2.3.6 with root...i also think i don`t have cwm..seems to be stock recovery...how can i install the cwm recovery?
Will this CWM work on the callisto? "CLOCKWORKMOD 5.0.2.6" (got it from here: http://galaxy551.wordpress.com/2011/12/09/clockworkmod-5-0-2-6-a-x-guide/)

Hondologe said:
Right now im on Stock 2.3.6 with root...i also think i don`t have cwm..seems to be stock recovery...how can i install the cwm recovery?
Will this CWM work on the callisto? "CLOCKWORKMOD 5.0.2.6" (got it from here: http://galaxy551.wordpress.com/2011/12/09/clockworkmod-5-0-2-6-a-x-guide/)
Click to expand...
Click to collapse
ya download the didy version and follow the instructions .....to flash....

[ROM][official] HTC One X CyanogenMod 11.0 nightlies + M-releases

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
Code:
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
IMPORTANT INFORMATIONS
We will not support users and answer questions from users which:
are running a custom kernel
have flashed mods
modified system files
didn't follow our instructions word by word
are unfriendly
WIKI
Official CyanogenMod Wiki: http://wiki.cyanogenmod.org/w/Endeavoru_Info
INSTRUCTIONS
First time installing CyanogenMod 11.0 to your HTC One X (GSM), or coming from another ROM:
Read the official wiki
Read known issues ans FAQs
DO A BACKUP
Unlock your device via http://www.htcdev.com if you haven't done so already
Flash the preferred (touch / non-touch) HTC One X (GSM) recovery image from http://www.clockworkmod.com/rommanager via Fastboot
DO A DATA WIPE / FACTORY RESET
Copy GApps and the CM 11.0 zip to your SD card
Boot into Recovery
Flash the CM 11.0 zip from SD card
Flash GApps for KitKat from SD card
Flash the boot.img included in the CM 11.0 zip via Fastboot
Reboot
Don't restore system data using Titanium Backup!
Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Upgrading from earlier version of CyanogenMod 11.0:
Copy the CM 11.0 zip to your SD card
Boot into Recovery
DO A BACKUP
Flash the CM 11.0 zip from SD card
Optionally flash the most recent GApps if you encounter problems
Flash the boot.img included in the CM 11.0 zip via Fastboot if necessary. If in doubt, flash it.
Reboot
Upgrading from CyanogenMod 10.2:
Read known issues ans FAQs
DO A BACKUP
Flash the preferred (touch / non-touch) HTC One X (GSM) recovery image from http://www.clockworkmod.com/rommanager via Fastboot
Copy GApps and CM 11.0 ZIP to your SDCard
Boot into Recovery
Flash the CM 11.0 zip from SD card
Flash the GApps zip from SD card
Flash the boot.img included in the CM 11.0 zip via Fastboot
Reboot
Patience, it can take a while for the device to settle. The boot animation should disappear after 2-3 minutes.
DOWNLOADS
ClockworkMod-Recovery: http://www.clockworkmod.com/rommanager (search for "HTC One X (GSM)")
CM11.0 official stable builds: http://download.cyanogenmod.org/?device=endeavoru&type=snapshot (read http://www.cyanogenmod.org/blog/cm-11-m4-post-release-items)
CM11.0 official nightly builds: http://download.cyanogenmod.org/?device=endeavoru&type=nightly
Google Apps: http://wiki.cyanogenmod.org/w/Google_Apps
CHANGELOG
BBQDroid: http://changelog.bbqdroid.org/#endeavoru/cm11.0/next
CMXLog: http://www.cmxlog.com/11/endeavoru
KNOWN ISSUES
Audio may be problematic with MHL.
Sense 5 camera features not available (no burst, no zero-shutter-lag, picture quality seems to be worse).
Proximity sensor issues (screen stays black after call, hardware issue, it may not affect you).
Workaround: install Rezound Prox Sensor Calibrator and play with the PS1_CANC slider).
No P2P/Wi-fi Direct.
Screen corruption after unlocking when the device was rotated.
Just let it rotate again or close and re-open the app.
Crashes and freezes when using a docking station.
I can't test this. More reports and logcats are welcome.
FAQ
Can I dirty flash coming from CM 10.2?
Yes, generally it should work. Don't forget to flash CM 11.0 gapps and boot.img
Where is the Superuser App?
The Superuser App is now part of CM. You can find it in the Setting under the System category. Make sure you enable root access for Apps in the Superuser settings. In case you can't find it enable the "Developer options" by tapping "Build number 7" in "About phone" 7 times and enable root access there.
Where are the Sweep2Wake, Button Backlight Notifications, NVIDIA Smart Dimmer and Fast Charge Settings?
Gone or moved to other menus. But the functionality is still in the framework. See second post for details.
Where is the "Developer options" menu?
Hidden by default. Go to "About phone" and press "Build number" seven times to show it.
When do the nightlies start? When do upload the next version? When do you fix XYZ?
I don't know.
Does ART (the new Android runtime) work
Generally yes, but some apps (even from Google) have problems. Also the cache files use more space than with Dalvik. So if you have many apps installed you will run out of space.
But I enabled it anyway and now my phone doesn't start anymore .
The setting is persisted on the /data parition. So execute "echo -n libdvm.so > /data/property/persist.sys.dalvik.vm.lib" in the recovery (don't forget to mount /data). You can also execute is as root while the phone is trying to boot.

Here are instructions to enable or disable some features that were previously in the advanced settings menu.
Button Backlight Notifications (enabled by default)
Button backlight notifications are enabled/disabled by settings write permissions on a special file. To disable them remove the write permission for the sysfs file with
Code:
chmod 444 /sys/class/leds/button-backlight/slow_blink
Only execute it while the lights are not currently blinking.
The newest kernel also contains the ability to limit to the notification brightness. Do
Code:
echo 1 > /sys/class/leds/button-backlight/slow_blink_brightness_limit
to limit the brightness to your normal button backlight brightness (which you can adjust in the settings).
Fast Charge (disabled by default)
Fast charging is disabled by default and can be enabled with
Code:
echo 1 > /sys/devices/platform/htc_battery/fast_charge
Sweep2Wake (disabled by default)
Code:
# Enable s2w
echo 1 > /sys/android_touch/sweep2wake
# Adjust the needed swipe length. 325 for one button (default), 500 for two buttons and 850 for three buttons
echo 500 > /sys/android_touch/s2w_min_distance
# Disable direction independent behaviour
echo 0 > /sys/android_touch/s2w_allow_stroke
DoubleTap2Wake (disabled by default)
Like the name suggests. You can wake your device by double tapping anywhere on your hardware keys.
Code:
# Enable dt2w
echo 1 > /sys/android_touch/s2w_allow_double_tap
There are some tunables to adjust the minimum time span between taps (s2w_double_tap_duration) and maximum timespan (value of s2w_double_tap_duration + value of s2w_double_tap_threshold).
Nvidia SmartDimmer (disabled by default)
Now called "Adaptive backlight". Setting was moved to the "Display & LED" menu.
All settings where you manually have to execute a command are not persisted between reboots. You can use a third party app that supports toggling the settings or you can put the commands into /data/local/userinit.sh to apply them at boot.

Merry Christmas! If you don't celebrate Christmas then have a nice week!

Thömy said:
Merry Christmas! If you don't celebrate Christmas then have a nice week!
Click to expand...
Click to collapse
Big present!

Thömy said:
Merry Christmas! If you don't celebrate Christmas then have a nice week!
Click to expand...
Click to collapse
Waiting for christmas from almost a year ....and here is a bang of kitkat Rom from you ....
Thanks
Sent from my HTC One X using XDA Premium 4 mobile app

It is a real Christmas for all HTC one x owners
Merry Christmas to all of us. Me. You. And the one there behind the closet hiding
Sent from my Nexus 7 using xda app-developers app

AWWWEESOMEEE! I saw the delete post on the other forum it imagine was something like this.

downloading now! can't wait to install:fingers-crossed:

Thomy thanks for the cm11 build. One question will this work on philz recovery or would you advise using the recovery on op.

A splendid Christmas present. Now our HOX is back in business!!

paulh1978 said:
Thomy thanks for the cm11 build. One question will this work on philz recovery or would you advise using the recovery on op.
Click to expand...
Click to collapse
I don't know. I never used a recovery besides CWM and the CM one I had to compile myself.

paulh1978 said:
Thomy thanks for the cm11 build. One question will this work on philz recovery or would you advise using the recovery on op.
Click to expand...
Click to collapse
Better use recovery from op. Kit kat come with new permision.
Better...try flash with philz first and report if it working or not so other will know that too.
Sent from my EndeavorU using Tapatalk

Just downloading now will give it a try with philz and report back.

That is great, thank you for your hard work Downloading now.

fthunter said:
That is great, thank you for your hard work Downloading now.
Click to expand...
Click to collapse
Best Christmas present ever! (Don`t tell my wife)

Merry Christmas and thanks for all your hard work you have but into this great rom
Sent from my GT-I9100 using XDA Premium 4 mobile app

Gives me an Error:
Code:
set_metadata_recursive: some changes failed
E:Error executing updater binary in zip '/sdcard/Zips/CM11/cm-11-201312224-UNOFFICIAL-endevouru.zip'
Error flashing zip '/sdcard/Zips/CM11/cm-11-201312224-UNOFFICIAL-endevouru.zip'
I was using TWRP, solved when I used recovery from op.
FYI.

Wooow!! Thankyou sooo much I have been waiting for a KK to drop for my HoX!! Installing .... Merry Xmas all !!! )

Ambious said:
Gives me an Error:
Code:
set_metadata_recursive: some changes failed
E:Error executing updater binary in zip '/sdcard/Zips/CM11/cm-11-201312224-UNOFFICIAL-endevouru.zip'
Error flashing zip '/sdcard/Zips/CM11/cm-11-201312224-UNOFFICIAL-endevouru.zip'
Click to expand...
Click to collapse
Recovery issue. Use recovery from op
Sent from my EndeavorU using Tapatalk

I tried all day to build it myself!!! tnx thomy
Sent from my EndeavorU using Tapatalk

[Q] It is stable CM 11 ?

I just want to know if "[DEV] [ROM] [4.4] Cyanogenmod 11 [WIP] [ALPHA-1]" right now is stable for our gio
thanks for replying!

don't know
don't know I bricked my gio trying to flash a wrong cwm to flash it

Nope, Camera doesn't work but everything else does

Jlaeo said:
I just want to know if "[DEV] [ROM] [4.4] Cyanogenmod 11 [WIP] [ALPHA-1]" right now is stable for our gio
thanks for replying!
Click to expand...
Click to collapse
theres no actual working recovery for CM11 kitkat

sadistic11 said:
theres no actual working recovery for CM11 kitkat
Click to expand...
Click to collapse
lol, i really have installed CM11 and is stable and smooth ..... , but thx for your comment :highfive:

Jlaeo said:
lol, i really have installed CM11 and is stable and smooth ..... , but thx for your comment :highfive:
Click to expand...
Click to collapse
can i ask what recovery did you use? and what CM11 ROM?

sadistic11 said:
can i ask what recovery did you use? and what CM11 ROM?
Click to expand...
Click to collapse
cwm 6.0.4.5 see forum(how to)all the released cm11 roms
see ---- Legacy & Low Activity Devices > Samsung Galaxy Gio GT-S5660 > Galaxy Gio GT-S5660 Original Android Development----

devrieshh said:
cwm 6.0.4.5 see forum(how to)all the released cm11 roms
see ---- Legacy & Low Activity Devices > Samsung Galaxy Gio GT-S5660 > Galaxy Gio GT-S5660 Original Android Development----
Click to expand...
Click to collapse
is that the one with blue screen?

Yes
Sent from my GT-I9070 using xda app-developers app

I've tried it, but any problem with CWM 6.0 in i downloaded. please give me the tutorial

-Download cm-11-gio.zip
-Boot to recovery 6.0.4.5, press
PHP Code:
Vol. down -> Home -> Vol. down -> Vol. down -> Home
You'll enter "Install zip from sideload"
Part 2
-Download adb 1.0.31. Connect your phone to PC via usb. Launch adb and type
Code:
adb devices
-you'll get this
Code:
12346789 sideload
-Every things go good so now type
Code:
adb sideload c:\cm-11-gio.zip
-wait 5-6 min for the rom to be copied to phone abd flashed
Part 3 The end
-After the flashing press on the phone
PHP Code:
back -> back -> vol. down -> vol.down -> Home -> vol. down -> Home
-You've full wiped the phone
-Press
PHP Code:
now back -> back -> Home
Reboot to system
Wait for the rom to boot up
Enjoy!

guys just want to share
CyanogenMod 11.0
First release (20140116) of CM11.0 for Ace & Gio is available!
Link http://get.maclaw.pl/?id=517
CyanogenMod 11.0
First release (20140116) of CM11.0 for Ace & Gio is available!
This software is in experimental stage. You’re using it on your own risk!
For flashing our KitKat you can use any recovery!
If you want to say thanks by donating us using PayPal, feel free
Do full backup before installation and wipe data/cache (factory reset) after installation (only from stock ROM).
You can get it on our DOWNLOAD page.
Changelog:
* first release
Features (what should work)
* 2D/3D HW Acceleration
* audio (both speakers/headphones/microphone)
* GPS and A-GPS
* compass
* sensors
* Wi-fi
* Bluetooth with A2DP
* all native tethers (Wifi/BT/USB)
* Google Play
* CM11 functionallity
* CPU sleep mode
* mass storage
* ADB
* YouTube HQ
* external storage
* video playing
* BLN (backlight notifications) support
* built using Linaro toolchain
Issues
* camera doesn’t work
* if you find any, let us know
I’d be glad, if you shared links to our download page, instead of direct links to download.
Also would be great, if you wouldn’t create the mirrors
Thanks.
Guys who made it happen:
* Macław
* Marcin1147
Thanks for help from:
* androidarmv6
* tom3q
If you want to say thanks by donating us using PayPal, feel free
If somehow you’ll find a bug, use our bugtracker if you want to report it.
Tried and tested using cwm recovery V6.0.3.2