Develop Bugs

Think I bricked phone using Android kitchen

I restored my phone to stock then made a backup using CMW. I placed the CWM back up in the original_update folder of the android kitchen. Then went into the android kitchen and deodexed, rooted and intalled busy box. Then i built the rom, signed it, placed it on my SD, card booted into recovery, flashed SuperWipe then flashed the rom I made. It installed fine and booted up but i didn't have any signal. So i let it sit for about 5 minutes then Powered off my phone but it stayed at the Good Buy screen for like ten minutes so i pulled the battery, when i tried to boot it back up it wouldn't do any thing. I held the power button down and nothing happened. I tried plugging in a usb cable and my phone still would't do anything Its completely unresponsive
Any suggestions?

mattbradfo said:
I restored my phone to stock then made a backup using CMW. I placed the CWM back up in the original_update folder of the android kitchen. Then went into the android kitchen and deodexed, rooted and intalled busy box. Then i built the rom, signed it, placed it on my SD, card booted into recovery, flashed SuperWipe then flashed the rom I made. It installed fine and booted up but i didn't have any signal. So i let it sit for about 5 minutes then Powered off my phone but it stayed at the Good Buy screen for like ten minutes so i pulled the battery, when i tried to boot it back up it wouldn't do any thing. I held the power button down and nothing happened. I tried plugging in a usb cable and my phone still would't do anything Its completely unresponsive
Any suggestions?
Click to expand...
Click to collapse
I sadly did the same thing. I'm still trying to figure out what I did wrong in the kitchen to brick my phone. Mine powered up as well but upon restart it bricked. But its sad to say but its bricked. I did a warranty exchange. If you connect the phone to the computer it will register as qhsusb_dload and not an Android phone. Best of luck.
Sent from my SGH-T989 using XDA

TheTechNiq said:
I sadly did the same thing. I'm still trying to figure out what I did wrong in the kitchen to brick my phone. Mine powered up as well but upon restart it bricked. But its sad to say but its bricked. I did a warranty exchange. If you connect the phone to the computer it will register as qhsusb_dload and not an Android phone. Best of luck.
Sent from my SGH-T989 using XDA
Click to expand...
Click to collapse
Unfortunately I don't have a contract with T-Mobile so i can't do a warranty exchange. I ordered the USB Jig and i'm gunna see if that fixes it, if not I guess it's just a paper weight :\

mattbradfo said:
Unfortunately I don't have a contract with T-Mobile so i can't do a warranty exchange. I ordered the USB Jig and i'm gunna see if that fixes it, if not I guess it's just a paper weight :\
Click to expand...
Click to collapse
I hate to be the bearer of bad news but if its registering as a ghsusb_dload device, a jig won't work.....how do I know you may ask? Cause I tried that as well before the exchange. Haha. Good news is you can pay someone to jtag your device. I think its like 50-100 but way better than 600 for a new phone. You should be able to find the link around the forums somewhere.
Sent from my SGH-T989 using XDA

The kitchen is not always good. The guy that did visionary would custom make roms for you. You need something like that
Sent from my SGH-T989 using xda premium

Try this video on how to unbrick Samsung Galaxy S2. Its worth a try.
Hope the video helped.

techfanatic9 said:
Try this video on how to unbrick Samsung Galaxy S2. Its worth a try.
Hope the video helped.
Click to expand...
Click to collapse
Like I told you before, it doesn't work for hard bricks. If it says qhusb, it's done and needs jtag

techfanatic9 said:
Try this video on how to unbrick Samsung Galaxy S2. Its worth a try.
Hope the video helped.
Click to expand...
Click to collapse
Ya, my phone won't go into download mode. I'm just gunna have to send it to get J-taged

Send it back to Samsung that's what I did it has 1 year warranty
Try it just call Samsung they don't check if is brick
they just fix it they take like 2 weeks and is free

if sending it back to samsung dont work out for you, let me know. if all else fails, I have a riffbox, we can work something out.

Yayodroid said:
if sending it back to samsung dont work out for you, let me know. if all else fails, I have a riffbox, we can work something out.
Click to expand...
Click to collapse
Ok, sounds good i'll check with samsung

ok, keep us updated. or pm or something lol

Ok, good news samsung says they'll fix it!

sweet! what did you tell them? that it just stopped working all of a sudden?

Yayodroid said:
sweet! what did you tell them? that it just stopped working all of a sudden?
Click to expand...
Click to collapse
I just told them it was unresponsive and that it would't turn on. They didn't even ask if I rooted it

xcrazydx said:
Like I told you before, it doesn't work for hard bricks. If it says qhusb, it's done and needs jtag
Click to expand...
Click to collapse
Like I said
Sent from my SGH-T989 using XDA

mattbradfo said:
I just told them it was unresponsive and that it would't turn on. They didn't even ask if I rooted it
Click to expand...
Click to collapse
Good bro. Be careful this, time around
Sent from my SGH-T989 using XDA

[Q] My S3 won't boot after attempting to install custom rom thru CWM

My S3 won't boot after attempting to install custom rom thru CWM. I tried to enter into the recovery mode by pressing Volume Up and Home, Power button but it doesn't even turn on!! I even tried holding down Volume Down and Home Power and it doesn't even turn on. It doesn't even go into the Logo screen....
Help please!!!

Need more info on what you installed. Sounds hard bricked though.
Sent from my SGH-T999 using xda premium

mt3g said:
Need more info on what you installed. Sounds hard bricked though.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Agreed-
Try pulling the battery and waiting a few seconds, then try to reboot. I did something while installing a rom and the phone booted but just showed a black screen but I didn't realize it.

It does help to know exactly what it was you tried to flash.
Sent from my SGH-T999 using xda app-developers app

luige007 said:
My S3 won't boot after attempting to install custom rom thru CWM. I tried to enter into the recovery mode by pressing Volume Up and Home, Power button but it doesn't even turn on!! I even tried holding down Volume Down and Home Power and it doesn't even turn on. It doesn't even go into the Logo screen....
Help please!!!
Click to expand...
Click to collapse
Joy!
What rom did you flash...be specific...and where did you find it from?
Do you have TMobile PHP? If you do then you can get a replacement S3 for $5 from TMobile customer care. That is probably the easist way to fix this issue.
Sent from my SGH-T999 using xda premium

brandonmaze said:
Joy!
What rom did you flash...be specific...and where did you find it from?
Do you have TMobile PHP? If you do then you can get a replacement S3 for $5 from TMobile customer care. That is probably the easist way to fix this issue.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I flashed it with the Omega ROM with the I9300 version thinking that my phone was that same model. Very dumb on my part .
Sadly I don't have PHP.
Would a JIG help my phone reboot to the download state?

luige007 said:
I flashed it with the Omega ROM with the I9300 version thinking that my phone was that same model. Very dumb on my part .
Sadly I don't have PHP.
Would a JIG help my phone reboot to the download state?
Click to expand...
Click to collapse
Yep a jig would send u into download mode. I'm pretty sure from there u can use Odin, if I'm not mistakened.
Sent from my SGH-T999 using xda app-developers app

i did the same damn thing
:crying::crying:
luige007 said:
I flashed it with the Omega ROM with the I9300 version thinking that my phone was that same model. Very dumb on my part .
Sadly I don't have PHP.
Would a JIG help my phone reboot to the download state?
Click to expand...
Click to collapse

luige007 said:
I flashed it with the Omega ROM with the I9300 version thinking that my phone was that same model. Very dumb on my part .
Sadly I don't have PHP.
Would a JIG help my phone reboot to the download state?
Click to expand...
Click to collapse
Jig won't help only a jtag fix. Here you go.
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-iii-jtag-brick-repair/
gulbir101 said:
Yep a jig would send u into download mode. I'm pretty sure from there u can use Odin, if I'm not mistakened.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Sent from my SGH-T999 using xda app-developers app

same problm
i am having same problem with my micromax A 54 did u get any solution for your phone............

In hindsight im watching you guys do just what I did two weeks ago.. To save u time ITS BRICKED for sure .Jtag service fixed me right up, hes very professional as well.mobiltechvideos.com
Set up a repair send phone off takes a week.
Watch very very closely what you flash.If unsure dont do it, or youll be spending 60 $ to jtag everytime you do this.
Sent from my SGH-T999 using xda app-developers app

lojak29 said:
In hindsight im watching you guys do just what I did two weeks ago.. To save u time ITS BRICKED for sure .Jtag service fixed me right up, hes very professional as well.mobiltechvideos.com
Set up a repair send phone off takes a week.
Watch very very closely what you flash.If unsure dont do it, or youll be spending 60 $ to jtag everytime you do this.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
And you got mad when people told you exactly that.
Sent from my SGH-T999 using xda premium

lojak29 said:
In hindsight im watching you guys do just what I did two weeks ago.. To save u time ITS BRICKED for sure .Jtag service fixed me right up, hes very professional as well.mobiltechvideos.com
Set up a repair send phone off takes a week.
Watch very very closely what you flash.If unsure dont do it, or youll be spending 60 $ to jtag everytime you do this.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
You do know this thread is from last year, right?
|When Emotion Goes Up, Logic Goes Down|
|Even If You Fall Face First You're Still Moving Forward|

same problem but a lilltle bit different
i installed jellyblast custom romon galaxy y(s5360) and it worked well.
later i installed some apps and an psp emulater named(ppsspp) downloaded from google play.
and downloaded a game for that ppsspp and tried to play. and it got stuck in the settings so i restarted the phone (by holding power key 11 sec)
it just showing its logo but not starting .....what to do???
plz be urgent...:crying::crying::crying::crying:

re: reboot
shiva4ulove said:
i installed jellyblast custom romon galaxy y(s5360) and it worked well.
later i installed some apps and an psp emulater named(ppsspp) downloaded from google play.
and downloaded a game for that ppsspp and tried to play. and it got stuck in the settings so i restarted the phone (by holding power key 11 sec)
it just showing its logo but not starting .....what to do???
plz be urgent...:crying::crying::crying::crying:
Click to expand...
Click to collapse
Reboot into recovery mode and wipe cache, dalvik cache and do a factory reset in recovery.
Do NOT wipe/format system.
Then reboot the phone and it should work fine.

help
okay i have the same exact problem. i tried to flash darkyrom iii from androidgeeks.com or something like that, and, i also didn't see that it was for the i9300 only and it went through the little setup process from within cwm (like its own little installer) all steps went fine and everything. asked if i wanted to reboot, i touched "no" then the installer closed and brought me back to cwm and cwm decided to just reboot my phone on its own anways. now im waiting for it to boot, nothing. research, take the battery out along with the sim and sd for about 45 minutes. nothing. i plug it into the computer and nothing happens. i take out the battery and plug it into the computer, again to no prevail. so with the battery out and the phone plugged into the computer, i hold power, home and volume down and a red led comes on the phone and the computer makes the "attatched device" sound. but isnt recognized by kies or odin. will a jig help me out at all?
*edit* i got the rom from here; android.gs/update-galaxy-s3-darkyrom-android-4-1-2-jelly-bean/

re: flashing 9300 rom
majidjaccion said:
okay i have the same exact problem. i tried to flash darkyrom iii from androidgeeks.com or something like that, and, i also didn't see that it was for the i9300 only and it went through the little setup process from within cwm (like its own little installer) all steps went fine and everything. asked if i wanted to reboot, i touched "no" then the installer closed and brought me back to cwm and cwm decided to just reboot my phone on its own anways. now im waiting for it to boot, nothing. research, take the battery out along with the sim and sd for about 45 minutes. nothing. i plug it into the computer and nothing happens. i take out the battery and plug it into the computer, again to no prevail. so with the battery out and the phone plugged into the computer, i hold power, home and volume down and a red led comes on the phone and the computer makes the "attatched device" sound. but isnt recognized by kies or odin. will a jig help me out at all?
*edit* i got the rom from here; android.gs/update-galaxy-s3-darkyrom-android-4-1-2-jelly-bean/
Click to expand...
Click to collapse
You are about about the 50th person in the past couple months who done the same thing, flashing a 9300 rom.
The only way to get the phone back into proper working condition is to send it off to be Jtag'ed.
There are some very good deals on Jtag if you go to eBay and search for "JTAG Galaxy S3".
Good Luck!

thank you
Misterjunky said:
You are about about the 50th person in the past couple months who done the same thing, flashing a 9300 rom.
The only way to get the phone back into proper working condition is to send it off to be Jtag'ed.
There are some very good deals on Jtag if you go to eBay and search for "JTAG Galaxy S3".
Good Luck!
Click to expand...
Click to collapse
ahh thats what i was afraid of.. im gonna check a couple local places first with fingers crossed before shipping it off though. have you personally sent one in to any of those ebay services?

re: jtag
majidjaccion said:
ahh thats what i was afraid of.. im gonna check a couple local places first with fingers crossed before shipping it off though. have you personally sent one in to any of those ebay services?
Click to expand...
Click to collapse
Nope, I never had a need to. But I have read here in XDA that people do get excellent service at a good price at eBay.

Misterjunky said:
Nope, I never had a need to. But I have read here in XDA that people do get excellent service at a good price at eBay.
Click to expand...
Click to collapse
hmmm... i was leading into my next queston which would have been; is there any specific seller you may have read about or saw somewhere that i should go to? cause, for me, ebay is a little... "ehhhhh.." you know what i mean? plus on top of that im sending in my phone so i just want to make sure everything is from a trusted source.

hard bricked

well.. i guess from what I've been reading once in hard brick its toast... last night i tried to install the 1% bat mod, and failed. causing my phone to not power back up. at all... I've tried to boot into download mode, and recovery mode, the screen doesn't even turn on. nothing happens. from what I've read on here it sounds like its done. any suggestions? today after work I'm going to best buy and try and play stupid and see if by chance they will set me up with a new phone. I've only had it for 3 months, and I'm hoping since it cant boot at all they will just swap me out. otherwise ill have to pick one up from eBay...

gt8684 said:
well.. i guess from what I've been reading once in hard brick its toast... last night i tried to install the 1% bat mod, and failed. causing my phone to not power back up. at all... I've tried to boot into download mode, and recovery mode, the screen doesn't even turn on. nothing happens. from what I've read on here it sounds like its done. any suggestions? today after work I'm going to best buy and try and play stupid and see if by chance they will set me up with a new phone. I've only had it for 3 months, and I'm hoping since it cant boot at all they will just swap me out. otherwise ill have to pick one up from eBay...
Click to expand...
Click to collapse
You have to send your device, but it's 60$, i take the link on the forum...
http://forum.xda-developers.com/showpost.php?p=35367136&postcount=7

If it dosent boot at all samsung will fix it for free
sent from outside ur window

twanskys204 said:
If it dosent boot at all samsung will fix it for free
sent from outside ur window
Click to expand...
Click to collapse
Even if i was screwing with the ROM files...? i thought that voided warranty. i mean it cant boot at all... but im sure they have ways of knowing what i did...

If they cant turn on they dont know what happend
sent from outside ur window
---------- Post added at 04:25 PM ---------- Previous post was at 04:22 PM ----------
They will reset and send it back....the only way they wont honor ur warranty is if they see your flash counter..... and or system modifeid status whitch they wont
sent from outside ur window

thanks for the help!. i did the live chat.. played dumb. and they told me i have to call and get further assistance. so i will have to wait till monday to call.

Kies did this while updating to JB, right?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

ConeyKiller said:
Kies did this while updating to JB, right?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Yes, gt.. It was definitely Kies while updating.
Sent from my Galaxy S3

haha... i can give it a try... i have to call samsung in the morning... once i get off the phone ill post here and tell yall what my verdict is.

Ok i called and talked to Samsung. told them my "problem" and they emailed me a shipping label, i need to send them the phone and the battery, and they will look into my problem and send the phone back once they fix it. i also told them my battery felt warmer than normal. on a side not, this is a real problem. my phone had been off for 2 days, while on the phone with Samsung they asked me to take out the battery, and i noticed the battery was actually quite warm, struck me as odd considering the phone has been off for days... i told them that too.. anyone else have that problem?

Ok so ur gonna get u phone fixed then :good
Sent from my SAMSUNG-SGH-I317 using xda premium

gt8684 said:
Ok i called and talked to Samsung. told them my "problem" and they emailed me a shipping label, i need to send them the phone and the battery, and they will look into my problem and send the phone back once they fix it. i also told them my battery felt warmer than normal. on a side not, this is a real problem. my phone had been off for 2 days, while on the phone with Samsung they asked me to take out the battery, and i noticed the battery was actually quite warm, struck me as odd considering the phone has been off for days... i told them that too.. anyone else have that problem?
Click to expand...
Click to collapse
It's obviously doing something... Try to force download mode like this:
Hook up the phone with no battery inserted
Hold Vol Down + Home only
Insert battery

Ya if the battery is still warm, it is doing something. I'd try every absolute way to boot to download or recovery before sending it in.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

i double and triple checked it... its fried no start no matter what. no magic tricks to get this thing started.... so i just hope they fix it, it will reset the flash count.

Let us know how it goes
Sent from my SAMSUNG-SGH-I317 using xda premium

i mailed it off a day ago, they are supposed to get getting it sometime today. the rep said it could take up to 8 days for them to process it, then 2 days for them to mail it back. ill keep y'all posted

gt8684 said:
i double and triple checked it... its fried no start no matter what. no magic tricks to get this thing started.... so i just hope they fix it, it will reset the flash count.
Click to expand...
Click to collapse
Why are you worried about the flash count? I thought that Triangle Away worked on the GS3.

gt8684 said:
well.. i guess from what I've been reading once in hard brick its toast... last night i tried to install the 1% bat mod, and failed. causing my phone to not power back up. at all... I've tried to boot into download mode, and recovery mode, the screen doesn't even turn on. nothing happens. from what I've read on here it sounds like its done. any suggestions? today after work I'm going to best buy and try and play stupid and see if by chance they will set me up with a new phone. I've only had it for 3 months, and I'm hoping since it cant boot at all they will just swap me out. otherwise ill have to pick one up from eBay...
Click to expand...
Click to collapse
The same thing happened to me. I tried to install the insert coin revolution rom with muti window support. (unable to resist) and then my phone suddenly turned off. I got happy and thought it worked then a couple minutes later I tried everything but it won't turn on. So I gave it to Telus and said that I did a factory reset and then suddenly it turned off and won't turn back on. so they sent it for repair and said it would take 2-3 weeks. Right now is week 2 of 3. good luck.

well my phone was completely dead so I could use triangle away...I'm not worried about it. if they find out it just means they wont fix it for free...
thanks I need the luck, I'm completely phone free... its a funny feeling not having one... no worries though...

Crazy how dependent we are on these things. Too bad a jig doesn't work like on the GS2. That thing saved me when I had to send it in for warranty repair.

[Q] Very strange brick situation

I was flashing a rom last night using twrp and after the rom was finished it said something like "no rom is installed on phone" so after seeing this I automatically tried another rom and it it seemed to have installed properly so I rebooted the and it never came back on. Doesn't vibrate, doesn't show charging symbol nor will it enter into download mode. The strange thing is when plugged into my pc it gets recognized but it shows this driver error message "driver for qualcomm cdma technologies msm" and the phone gets warm around the camera indicating that it may actually be charging. I've never experienced anything like this and I have searched for bricked solutions but this seems quite unique and I have found no similar cases. Is my phone completely bricked or can it be bought back to life?? If someone can help me it'd be greatly appreciated thanks

Godson1227 said:
I was flashing a rom last night using twrp and after the rom was finished it said something like "no rom is installed on phone" so after seeing this I automatically tried another rom and it it seemed to have installed properly so I rebooted the and it never came back on. Doesn't vibrate, doesn't show charging symbol nor will it enter into download mode. The strange thing is when plugged into my pc it gets recognized but it shows this driver error message "driver for qualcomm cdma technologies msm" and the phone gets warm around the camera indicating that it may actually be charging. I've never experienced anything like this and I have searched for bricked solutions but this seems quite unique and I have found no similar cases. Is my phone completely bricked or can it be bought back to life?? If someone can help me it'd be greatly appreciated thanks
Click to expand...
Click to collapse
Try unbrick sgII, heimdall or buy a little download jig for $5. Usually the phone is a complete brick if the computer says QHSUSB D_LOAD attached. You're phone shouldn't say cdma anything since its a gsm phone so something is wrong there. What rom did you flash?
Sent from my SGH-T989 using Tapatalk

richardlibeau said:
Try unbrick sgII, heimdall or buy a little download jig for $5. Usually the phone is a complete brick if the computer says QHSUSB D_LOAD attached. You're phone shouldn't say cdma anything since its a gsm phone so something is wrong there. What rom did you flash?
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
Yea the cdma thing threw me off to when I first saw it...I just purchased a jig from ebay. I really hope it works cause I was just contemplating selling this phone to put towards an upgrade.The roms I flashed were (can't remember which order) Liquid-JB-v2.0-RC9-hercules and Liquid-JB-v2.0-RC9-d2tmo. Like I said I flashed one after it was done I went to hit reboot and it said there was no rom present on the phone. So I'm thinking good heads up so nervously not thinking I immediately flashed the other. It loaded fine I got no "no rom" warning so I hit reboot system as usual and then...nothing, won't do anything. Tried going into download mode and it just kinda acts as if I'm removing and inserting the usb cable back and forth and it says I need to format my disc

I'm guessing you flashed the d2tmo one second? That's the T-Mobile Galaxy S3. Sorry man, you're bricked
Sent from my SGH-T989 using xda premium

android88 said:
I'm guessing you flashed the d2tmo one second? That's the T-Mobile Galaxy S3. Sorry man, you're bricked
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Damn...ugh that sucks. So you don't the the usb jig is going to work?

Godson1227 said:
Yea the cdma thing threw me off to when I first saw it...I just purchased a jig from ebay. I really hope it works cause I was just contemplating selling this phone to put towards an upgrade.The roms I flashed were (can't remember which order) Liquid-JB-v2.0-RC9-hercules and Liquid-JB-v2.0-RC9-d2tmo. Like I said I flashed one after it was done I went to hit reboot and it said there was no rom present on the phone. So I'm thinking good heads up so nervously not thinking I immediately flashed the other. It loaded fine I got no "no rom" warning so I hit reboot system as usual and then...nothing, won't do anything. Tried going into download mode and it just kinda acts as if I'm removing and inserting the usb cable back and forth and it says I need to format my disc
Click to expand...
Click to collapse
Yeah if you flashed the d2tmo you are toast!!!
Sent from my SGH-T989 using Tapatalk

richardlibeau said:
Yeah if you flashed the d2tmo you are toast!!!
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
i'll guess I'll wait for the jig to come if that doesn't work I guess I'll use my warranty I really don't wanna go that route being dishonest...but that's my last resort.

Godson1227 said:
i'll guess I'll wait for the jig to come if that doesn't work I guess I'll use my warranty I really don't wanna go that route being dishonest...but that's my last resort.
Click to expand...
Click to collapse
I did it once cost me $40 and they sent a new one. Just told them i got an update and after i updated it didn't boot up anymore.
Sent from my SGH-T989 using Tapatalk

richardlibeau said:
I did it once cost me $40 and they sent a new one. Just told them i got an update and after i updated it didn't boot up anymore.
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
Ok thanks, hopefully it goes smooth. Plus i'm sure do the cost to replace still doesn't cover the amount of money i've paid for insurance so I guess it all evens out in the end lol

Did the jig work?

I have the same exact issue. For some odd reason I wanted to flash the d2mo rom also those heavy drinking nights should not be spent flashing roms to show you are cool to your friends. Regardless made a jig and did not work. jig worked on another friends samsung so know the jig works but not on my s2. Anyone know if at this point a jtag might bring it back to life?.

If you flashed the d2tmo you are toast. That is for the s3. Different kernel and processor.
Sent from my SGH-T989 using Tapatalk

this just happen to me brand new t989 out off box root flash aopk rom and phone wont
richardlibeau said:
If you flashed the d2tmo you are toast. That is for the s3. Different kernel and processor.
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
this just happen to me brand new t989 out off box root flash aopk rom and phone wont and i get the err too

just want to say sorry to all you having these problems i feel your pain guys and good luck with your warranties shoot mobiletechvideos a message see what they can do for you they fix and revive anything lol

I Think I Bricked My Phone.. Any Advice?

Hey guys . I Picked up a three month old galaxy this morning. I have had problems rooting before but always managed to fix them but this I cannot figure out. Here is exactly what I did and what happened.
1.First I rooted my phone using GalaxyS3RootUSCanadaMac.
2. Downloaded the following, superuser, ezunlock, and rom manager.
3. Flashed clokworkrecovery through rom manager.
4. Unlocked the bootloader with ezunlock
5. Tried to reboot into recovery via clockwork and it would just hang and never reboot.
6. Decided to do a restart , so I clicked power on the right hand side and selected restart.
7. Fell asleep and woke up to a dead phone.
I cannot get it to boot at all , not even in download mode. I get no lights or vibrations when trying to boot. If I remove the battery and hook the usb cord in I get a red light at the top but not with the battery in.
Any info on what I might have done wrong or what I can try to do to fix it would be great.
Thanks in advance guys.

bftiedt said:
4. Unlocked the bootloader with ezunlock
Click to expand...
Click to collapse
This is completely inapplicable to the i747m, and the reason your phone's bricked.
Unless you can somehow get into download mode, you're going to need a JTAG to recover it.

bftiedt said:
Hey guys . I Picked up a three month old galaxy this morning. I have had problems rooting before but always managed to fix them but this I cannot figure out. Here is exactly what I did and what happened.
1.First I rooted my phone using GalaxyS3RootUSCanadaMac.
2. Downloaded the following, superuser, ezunlock, and rom manager.
3. Flashed clokworkrecovery through rom manager.
4. Unlocked the bootloader with ezunlock
5. Tried to reboot into recovery via clockwork and it would just hang and never reboot.
6. Decided to do a restart , so I clicked power on the right hand side and selected restart.
7. Fell asleep and woke up to a dead phone.
I cannot get it to boot at all , not even in download mode. I get no lights or vibrations when trying to boot. If I remove the battery and hook the usb cord in I get a red light at the top but not with the battery in.
Any info on what I might have done wrong or what I can try to do to fix it would be great.
Thanks in advance guys.
Click to expand...
Click to collapse
** After some more reading I realize That att bootloader is not locked. So since I ran the ezunlock app im guessing that my problem ... Any suggestions?***

smelenchuk said:
This is completely inapplicable to the i747m, and the reason your phone's bricked.
Unless you can somehow get into download mode, you're going to need a JTAG to recover it.
Click to expand...
Click to collapse
Any suggestions n how to get into download mode? Also I have a usb JTAG from programming cable boxes but Im not sure if it will work?

I believe I read about someone else who used this. The unlocker is made for the Verizon variant. You will need JTAG service to get your phone up and running.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

ih8mydroid said:
I believe I read about someone else who used this. The unlocker is made for the Verizon variant. You will need JTAG service to get your phone up and running.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
Yes I seen that. The phone is still under warrant so I am sending it in to Samsung . I seen another thread where the same thing happened and it was warrantied so I'm hoping I get lucky. Thanks guys for all your help

bftiedt said:
Yes I seen that. The phone is still under warrant so I am sending it in to Samsung . I seen another thread where the same thing happened and it was warrantied so I'm hoping I get lucky. Thanks guys for all your help
Click to expand...
Click to collapse
That's fraud big time! If you would have read up you wouldnt be in this situation. In all honestly I hope you have to come out of pocket because stunts like this is what makes those who do have REAL problems with their phone get the run around from companies.
Sent from my SAMSUNG-SGH-I747 using xda premium

Looks like Samsung has come through and is going to warranty it. It was repaired today by having the board replaced. Hopefully I will have it back next week.

bftiedt said:
Yes I SAW that. The phone is still under warranty, so I am sending it in to Samsung. I SAW another thread where the same thing happened and it was warrantied so I'm hoping I get lucky. Thanks guys for all your help
Click to expand...
Click to collapse

903tex said:
That's fraud big time! If you would have read up you wouldnt be in this situation. In all honestly I hope you have to come out of pocket because stunts like this is what makes those who do have REAL problems with their phone get the run around from companies.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
That's not fraud? That's called a warranty
Sent from my SPH-L710 using xda premium

Wow. Why can't they people read?? This is the reason companies don't want to to warranty anything because of crap like this.

r.suchil2 said:
That's not fraud? That's called a warranty
Click to expand...
Click to collapse
Which he voided the moment he rooted his phone.

Well getting my phone back today. Thanks for the warranty comments negative nancy.