Ok so, my brother gave my parents a kindle that had TWRP, FFF, and Cyanogen mod on it (not sure what version). My mom tried to use it one day, but it wouldn't go past the FFF yellow triangle thing so she gave it to me to try and fix. I went into TWRP and wiped the cache and did a factory reset and that didn't do anything. I found this thread (http://forum.xda-developers.com/showthread.php?t=1638452) to try and revert it to the stock software, now this is where I think I messed something up. After I installed the update onto the kindle with TWRP I rebooted the device and now, it will boot onto the normal white and orange KF screen but won't go anywhere past that. I can't get back into TWRP or anything it just stays at the logo screen. I can control is using ADB but not fastboot. With certain ADB commands though it says - exec '/system/bin/sh' failed: No such file or directory <2> -
I've been trying to fix it for 2 or 3 days now and cannot figure it out, I've been looking through these forums and have tried numerous things but nothing seems to work. Please help me haha
You need a fastboot cable & Soupkit my dude. I just started tinkering with it not too long ago after I let it set for almost a year lol. Here, I'll like you to the one I got.
Also get ready to put Linux on your PC. Here is my previous thread that I had to figure out how to fix myself.
Thread
Fastboot Universal USB
Hey guys, before I begin, yes i read the '[HOW-TO] Before asking for troubleshooting help...' page as well as the '[GUIDE] Kindle Fire For Beginners' page, and am still in need of a bit of assistance due to my hilariously lacking knowledge of the workings of electronic equipment. :silly:
I just dug my kindle fire out of my dresser drawer where it has been sitting due to being 'bricked' for quite some time (stuck at the boot logo - white kindle text and orange fire text shimmering on a pure black background - holds a charge but is indefinitely at this screen). It is completely stock, having not downloaded or installed any ROMs or any other software, and initially began experiencing this problem the morning after running it out of battery while downloading a few books and games one night. I promptly plugged it in, went to bed, and woke up to it in this state that next morning.
I have tried downloading Kindle Fire Unbrick V1.1 by ZombiePiratez and running that to fix it, but it does not recognize my kindle fire. So, i downloaded Eclipse ADT with Android SDK for windows and followed some instructions i found for getting it to recognize my kindle as "Android Composite ADB Interface" in hopes that then the unbricking tool would recognize it and work its magic for me. But it didnt. I imagine this is because the process that I followed is flawed.
My question is, if i were to buy a "factory cable" would I be able to unbrick my kindle fire without having to do any of this command promp shamanism thats clearly over my head? Kinfauns states in his guide that "With a factory cable, unbricking just comes down to "plug it in and flash new stuff" in almost every bricking situation." But what does 'flash new stuff' mean; should I have picked that up from the guide as well? Or could I just use the factory cable in conjunction with ZombiePiratez unbricking tool to get back to the factory settings?
Thanks in advance for any pointers
See my How to flash twrp and firefirefire with a Fastboot cable
http://forum.xda-developers.com/showpost.php?p=53652317&postcount=2
Sent from my XT862 using Tapatalk
Hey @sd_shadow !
Thanks for the link to that, the videos you've created make it possible for even someone with my level of tech knowledge to work through this problem. Immensely better than trying to follow a written guide
Anyway, I finally got my fastboot cable and followed the steps in your videos to the tee, however I'm still encountering one small problem. When I get to the point where I'm installing update-kindle-prerooted.6.3.3.v1.zip in TWRP by swiping across the screen, it runs until it gets to the line thanking paulobrien and two others but then promptly freezes (or so i assume since it doesnt continue on and the loading bar halts in its tracks). I decided after a few tries to just hold the power button to get it to shut off and then booted the kindle in normal boot mode - and it worked! - despite not being able to complete the process as shown in your video. But this concerns me, as I do not have any of the additional apps shown in your video (not that this truly matters to me) and under settings -> device it shows that I am running version 6.3.1_user_#####. So I have two questions:
1) Did the fff and twrp processes work, but the 6.3.3 update fail thus enabling me to use my kindle as a v6.3.1 device again?
2) Will it harm my device in any way (e.g. re-bricking) if I just call it good and use it as it is now?
Thanks for all the help so far :highfive:
noobSaurus said:
Hey @sd_shadow !
Thanks for the link to that, the videos you've created make it possible for even someone with my level of tech knowledge to work through this problem. Immensely better than trying to follow a written guide
Anyway, I finally got my fastboot cable and followed the steps in your videos to the tee, however I'm still encountering one small problem. When I get to the point where I'm installing update-kindle-prerooted.6.3.3.v1.zip in TWRP by swiping across the screen, it runs until it gets to the line thanking paulobrien and two others but then promptly freezes (or so i assume since it doesnt continue on and the loading bar halts in its tracks). I decided after a few tries to just hold the power button to get it to shut off and then booted the kindle in normal boot mode - and it worked! - despite not being able to complete the process as shown in your video. But this concerns me, as I do not have any of the additional apps shown in your video (not that this truly matters to me) and under settings -> device it shows that I am running version 6.3.1_user_#####. So I have two questions:
1) Did the fff and twrp processes work, but the 6.3.3 update fail thus enabling me to use my kindle as a v6.3.1 device again?
2) Will it harm my device in any way (e.g. re-bricking) if I just call it good and use it as it is now?
Thanks for all the help so far :highfive:
Click to expand...
Click to collapse
1 yes installing TWRP and FFF reset boot, and allowed 6.3.1 to boot normally
2. the only problem should be that, when connected to wifi, update will redownload and try again once a day or so
Kindle will reboot to TWRP, but update should fail, if that does not bother you it is fine
3. what twrp version did you install? says in twrp if you are not sure
I installed TWRP v2.7.1.0-blaze because that is what you used in the video, even though i had read that 2.2.2.1 may be preferable for stock unrooted kindle fires. I did this so that I could follow your video exactly without having to change any steps except for switching otter to blaze in the cmd promt code I inputted.
Also, as I write this, Ive realized that I still may have made a mistake and installed one of the alternate test files for the 6.3.3 prerooted update and not the complete file itself, so ill get back with that info.
Yeah, i installed the alternate test file the first time :silly:
Went back through and followed your instructions to the 'tee' again and its up and running.
I do have one more question though; when I am using the device I dont get very far before selecting an application or making another command causes the screen to go black, only displaying the time and settings option at the top and the home button, back button, search button, etc at the bottom - none of which respond when selected. This happens with both the go launcher and the kindle launcher, and each time the only way I can stop it is resetting the device... Any suggestions to counteract this?
Hi there!
I think I may have bricked my Fire TV Stick 1 (bought at launch in Germany)...
Current situation:
- stick turns on, shows white amazon logo on black background
- continuously rebooting; ~5s black screen, ~5s amazon logo
After months not having it used, I found out I may be able to root it by now. So I did research over the vast amount of threads and posts and was overwhelmed by the information... So I tried to get started but struggled to find the right steps and therefore maybe failed.
I updated it to 5.0.5 (stock) and tried King Root, then Kingo Root, which was a success.
I tried to use the TWRP 3.0.0-7 v2 zip and used the sh command from the respective thread (I thought that was it, since all my devices before used either TWRP or CWM).
To this point, all went through and I wanted to reboot into recovery, but there was only this generic (stock?) red text recovery screen. I waited to be sure, nothing happened and I unplugged it to reboot.
It booted fine and I reflashed the TWRP zip, in case I didn't do it properly. Again it did as expected.
I then pushed the latest prerooted 5.2.0.1 zip and rebooted to recovery, but again this generic screen, so I unplugged it early, I think.
From there on, I got stuck at the white amazon logo, see above.
I did not unlock the bootloader, adb shell confirmed it not being unlocked before.
During bootloops, I did not manage to get any control via adb or fastboot.
So, is it bricked once and for all? If not, how can I save it?
I don't care about anything stored on it.
I also have a Y-USB-OTG cable and connected a keyboard before, but could not interfere yet.
(If bricked, would a Teensy be of any use? I have one from CCast rooting days)
Thanks for reading and in advance.
I had same problem with my fire stick when used the USB power of my TV.
Did you try to power the fire stick TV with the power point and USB adapter?
l_aios said:
Hi there!
I think I may have bricked my Fire TV Stick 1 (bought at launch in Germany)...
Current situation:
- stick turns on, shows white amazon logo on black background
- continuously rebooting; ~5s black screen, ~5s amazon logo
After months not having it used, I found out I may be able to root it by now. So I did research over the vast amount of threads and posts and was overwhelmed by the information... So I tried to get started but struggled to find the right steps and therefore maybe failed.
I updated it to 5.0.5 (stock) and tried King Root, then Kingo Root, which was a success.
I tried to use the TWRP 3.0.0-7 v2 zip and used the sh command from the respective thread (I thought that was it, since all my devices before used either TWRP or CWM).
To this point, all went through and I wanted to reboot into recovery, but there was only this generic (stock?) red text recovery screen. I waited to be sure, nothing happened and I unplugged it to reboot.
It booted fine and I reflashed the TWRP zip, in case I didn't do it properly. Again it did as expected.
I then pushed the latest prerooted 5.2.0.1 zip and rebooted to recovery, but again this generic screen, so I unplugged it early, I think.
From there on, I got stuck at the white amazon logo, see above.
I did not unlock the bootloader, adb shell confirmed it not being unlocked before.
During bootloops, I did not manage to get any control via adb or fastboot.
So, is it bricked once and for all? If not, how can I save it?
I don't care about anything stored on it.
I also have a Y-USB-OTG cable and connected a keyboard before, but could not interfere yet.
(If bricked, would a Teensy be of any use? I have one from CCast rooting days)
Thanks for reading and in advance.
Click to expand...
Click to collapse
I guess you did not read enough.
At this point in time you can only root (kingoroot or kingroot) and replace root with SuperSu on a Firestick. TWRP (recovery) can not be installed because it was not released by rbox as of yet, that particular recovery\pre-rooted image is for firetv1 upgraded to OS5 and not for firestick.
Sorry man.
Have you tried to connect to a computer via USB and run kingoroot or kingroot for windows (whatever you used)? It is a small chance that will recover but it is a slim one....
mjnman said:
I had same problem with my fire stick when used the USB power of my TV.
Did you try to power the fire stick TV with the power point and USB adapter?
Click to expand...
Click to collapse
I could not remember, so I just retried it with two different chargers and two different cables (both used to power my Nexus 5).
Unfortunately resulting in the very same loop... But thanks nonetheless.
bula1ca said:
I guess you did not read enough.
At this point in time you can only root (kingoroot or kingroot) and replace root with SuperSu on a Firestick. TWRP (recovery) can not be installed because it was not released by rbox as of yet, that particular recovery\pre-rooted image is for firetv1 upgraded to OS5 and not for firestick.
Sorry man.
Have you tried to connect to a computer via USB and run kingoroot or kingroot for windows (whatever you used)? It is a small chance that will recover but it is a slim one....
Click to expand...
Click to collapse
Dang... Usually I don't make mistakes this dumb. Guess I learned my first lesson. I'll try to trace my mistake though, for future attempts.
I rooted it with the Kingo app, I think, and got that typical "stuck at 90%" and rebooted it like others did. It rebooted fine and Kingo verified it rooted.
I did not use Windows, I use Ubuntu, occasionally with Wine, yet I had no luck passing USB devices to it. (And always these missing libs...)
Normally, adb and fastboot (console) work fine (i.e. with my phone).
Now I have no chance to interfere with the bootloop, I think.
IIRC, sometimes I could spam commands and at one point adb was stuck at "waiting for device".
I tried to reproduce it just now, but could not get it again.
So, should I try adb or fastboot on another computer to be sure?
Would King(o) for Windows be of any help at this point? If so, what would be my best bet to catch it at some point I can recover it?
Is there any other way I could try? From my nooby perspective, could the bootsplash be an entrance for fastboot? Could it be just stuck trying to access erroneous partitions?
At this point I would try the most crazy and risky idea, since it is unusable anyway.
Thanks both of you for your answers.
l_aios said:
I could not remember, so I just retried it with two different chargers and two different cables (both used to power my Nexus 5).
Unfortunately resulting in the very same loop... But thanks nonetheless.
Dang... Usually I don't make mistakes this dumb. Guess I learned my first lesson. I'll try to trace my mistake though, for future attempts.
I rooted it with the Kingo app, I think, and got that typical "stuck at 90%" and rebooted it like others did. It rebooted fine and Kingo verified it rooted.
I did not use Windows, I use Ubuntu, occasionally with Wine, yet I had no luck passing USB devices to it. (And always these missing libs...)
Normally, adb and fastboot (console) work fine (i.e. with my phone).
Now I have no chance to interfere with the bootloop, I think.
IIRC, sometimes I could spam commands and at one point adb was stuck at "waiting for device".
I tried to reproduce it just now, but could not get it again.
So, should I try adb or fastboot on another computer to be sure?
Would King(o) for Windows be of any help at this point? If so, what would be my best bet to catch it at some point I can recover it?
Is there any other way I could try? From my nooby perspective, could the bootsplash be an entrance for fastboot? Could it be just stuck trying to access erroneous partitions?
At this point I would try the most crazy and risky idea, since it is unusable anyway.
Thanks both of you for your answers.
Click to expand...
Click to collapse
Do you still have root? Is your stick responding to the su command?
If so read this post: http://forum.xda-developers.com/fire-tv/help/guidance-recovering-bootloop-firetv-t3446902
If not:
Try kingoroot for windows however it is a slim change in my opinion as you wrote a FireTv image to your FireStick.
Copy and paste from: http://forum.xda-developers.com/fire-tv/development/guide-fire-stick-replace-king-o-root-t3440923
"IF YOU RUN INTO SOFTBRICK ISSUE (stuck at fire tv logo)
Make sure you have ADB drivers properly installed in your windows pc/laptop.
connect a genuine usb lead to the firestick/pc.
download the windows version of KINGO ROOT and install it.
open KINGO ROOT on the pc with Fire Stick connected up to pc and tv.
wait for the button to pop up and click root.
if you dont see AFTV or get enable debugging in the KINGO ROOT program on pc/laptop please unplug the stick from usb and replug it back in.
if this still wont work restart the pc/laptop or try another pc/laptop.
you should after clicking root boot back up into your homescreen, if it doesnt boot back into your homescreen automatically, wait around 5 minutes and unplug usb and re-plug it again. "
bula1ca said:
Do you still have root? Is your stick responding to the su command?
If so read this post: http://forum.xda-developers.com/fire-tv/help/guidance-recovering-bootloop-firetv-t3446902
If not:
Try kingoroot for windows however it is a slim change in my opinion as you wrote a FireTv image to your FireStick.
Copy and paste from: http://forum.xda-developers.com/fire-tv/development/guide-fire-stick-replace-king-o-root-t3440923
"[...]"
Click to expand...
Click to collapse
Thanks for the links, but from what I see, I need to get past the bootloader splash for adb to work. I'm stuck at the white "amazon" splash, not the colored "FireTV Stick" splash after the amazon one.
Sorry for not making it clear (and for that amount of text that maybe hid it)...
From what I understand and recall, I did only flash the recovery, right? Or does it automatically flash the zip I pushed to internal storage?
And what confuses me, the first attempt booting into recovery AFTER flashing the wrong one I got the former mentioned screen with red text. Reboot worked and the Stick was running. So I did retry and got the same red text after rebooting to recovery. I assumed it did not flash again and unplugged it earlier than the first attempt. Since then it got stuck at the white bootsplash.
Since I am still a noob, it seems to me the system wasn't touched, maybe a faulty recovery integrity forcing the bootloader to loop.
l_aios said:
Thanks for the links, but from what I see, I need to get past the bootloader splash for adb to work. I'm stuck at the white "amazon" splash, not the colored "FireTV Stick" splash after the amazon one.
Sorry for not making it clear (and for that amount of text that maybe hid it)...
From what I understand and recall, I did only flash the recovery, right? Or does it automatically flash the zip I pushed to internal storage?
And what confuses me, the first attempt booting into recovery AFTER flashing the wrong one I got the former mentioned screen with red text. Reboot worked and the Stick was running. So I did retry and got the same red text after rebooting to recovery. I assumed it did not flash again and unplugged it earlier than the first attempt. Since then it got stuck at the white bootsplash.
Since I am still a noob, it seems to me the system wasn't touched, maybe a faulty recovery integrity forcing the bootloader to loop.
Click to expand...
Click to collapse
I have no idea what you did however it will not automatically flash your zip, problem is you installed TRWP that was not meant for Firestick and overwrote its booting sequence. You most probably would had recover from your first attempt by re-installing a new image but once you tried to install it again it most probably finished writing the whole thing and damaged booting sequence.
bula1ca said:
I have no idea what you did however it will not automatically flash your zip, problem is you installed TRWP that was not meant for Firestick and overwrote its booting sequence. You most probably would had recover from your first attempt by re-installing a new image but once you tried to install it again it most probably finished writing the whole thing and damaged booting sequence.
Click to expand...
Click to collapse
Yeah, sad thing I got the wrong device, should have taken my time even more...
I googled the screen I got to two times before getting stuck:
http://forum.xda-developers.com/showpost.php?p=65968901&postcount=60
First time I waited approx. 15 minutes before pulling the plug to reboot. Since I noticed no difference I tried again and got the same screen. But this time I pulled the plug earlier, <1 minute.
I'd like to add that my bootloader was locked. Can I damage the booting sequence by corrupting the recovery or was my mistake that major to be able to do that?
I googled some key combinations to get into recovery or to bypass it, but I don't know if I get the right keys.
With my remote control I don't think I have enough time to hold the keys. Additionally I have a USB keyboard (Cherry KC1000; if possible, which keys btw?) and may be able to connect it via powered Y OTG cable.
So if anyone got any further input or ideas for me to rescue my FTVS, I'd be glad to receive it.
Thanks to all.
Anyone else maybe an idea?
The thing is, I cannot believe it is unsavable.
To summarize the current state (please see full details above):
- stuck in bootloop, white amazon logo
- flashed wrong recovery, after first flash the system booted, after second flash it got stuck (characteristics above)
- never flashed anything other than recovery
Strange thing it booted in first place, but now it refuses. Also I got the screen I mentioned above and unplugged as described above.
Can I possibly bypass the recovery check and try to boot directly to system? Or maybe interrupt for fastboot access?
If connected to PC, can you see it thru 'lsusb'? Or 'dmesg | tail'?
Kramar111 said:
If connected to PC, can you see it thru 'lsusb'? Or 'dmesg | tail'?
Click to expand...
Click to collapse
I tried both
watch -n 0.5 'dmesg | tail'
and
watch -n 0.5 'lsusb'
but with no identification whatsoever.
I double-checked with my Nexus 5 on the same port with the same cable, it identified fine.
One last bump for ideas before putting it into the trash.
I have a Windows 10 PC and a Kindle Fire HDX 8.9 that I purchased about 2 years ago. Up until the past few days I was a very basic user. Just spotify, web browsing and some games. The most advanced things I did on it were install some apk files from the internet and make it so the screen was always on in the secret developer options menu. Up until Monday I had no intentions of rooting my tablet or doing any high level tech wizardry with it.
But the past few weeks I have been noticing significant performance decreases in my kindle. Apps crashing, screen freezing, slow performance. I didn't think much of it, I figured I just had too many terrible games on it. On Friday morning it crashed while I was using it and attempted to boot back up but with the [fastboot] text under the word amazon. It got stuck on this screen, restarting it just brought it back to this, attempting to hold the power button and the volume up button didn't appear to do anything either. Eventually after restarting it about 20 times it booted normal for whatever reason. After this it worked normal for another day and then it crashed again and booted with the [fastboot] text. I read up more on fastboot and various kindle fire issues and jammed restarts until it randomly worked again.
This time I when it was working I tried restoring it to factory default in case something I had done or added was the cause of these boot loops or whatever. I also went into developer options and turned on usb debugging since my reading made it seem like that was pretty necessary.
It crashed and restarted again Monday morning but it didn't get stuck in fastboot this time, it just got stuck on the word amazon. So I installed the various tools and drivers I have read about on here and I have been doing my best to try and make it work again. But as someone with zero experience with this sort of thing I have hit a wall.
When I first hooked it up last night I set the driver to the "adb interface driver", I got adb to see the device and I was able to execute some commands to it. I made it reboot just to see if I could, it still stopped at the word amazon, and then I went to sleep. Today I turned on my computer and adb will not find the device. Apparently something changed overnight and windows will now only see the device as a standard mtp usb device. I have attempted to force it to change with the "update drivers -> browse my computer -> let me pick from a list -> Have disk " line. But when I choose the kindle drivers or the adb drivers it tells me they are incompatible. Unplugging and plugging back in doesn't do anything. Restarting doesn't do anything. Attempting to uninstall the drivers doesn't do anything. I don't know what is left or how to fix this so I can proceed. And honestly even after I get through this road block I have no idea what I should do to try and make my tablet operational again. So I am in need of some guidance. Is there anyone out there that can show me the way or at least get adb to see my device again?
horgenblorg said:
I have a Windows 10 PC and a Kindle Fire HDX 8.9 that I purchased about 2 years ago. Up until the past few days I was a very basic user. Just spotify, web browsing and some games. The most advanced things I did on it were install some apk files from the internet and make it so the screen was always on in the secret developer options menu. Up until Monday I had no intentions of rooting my tablet or doing any high level tech wizardry with it.
But the past few weeks I have been noticing significant performance decreases in my kindle. Apps crashing, screen freezing, slow performance. I didn't think much of it, I figured I just had too many terrible games on it. On Friday morning it crashed while I was using it and attempted to boot back up but with the [fastboot] text under the word amazon. It got stuck on this screen, restarting it just brought it back to this, attempting to hold the power button and the volume up button didn't appear to do anything either. Eventually after restarting it about 20 times it booted normal for whatever reason. After this it worked normal for another day and then it crashed again and booted with the [fastboot] text. I read up more on fastboot and various kindle fire issues and jammed restarts until it randomly worked again.
This time I when it was working I tried restoring it to factory default in case something I had done or added was the cause of these boot loops or whatever. I also went into developer options and turned on usb debugging since my reading made it seem like that was pretty necessary.
It crashed and restarted again Monday morning but it didn't get stuck in fastboot this time, it just got stuck on the word amazon. So I installed the various tools and drivers I have read about on here and I have been doing my best to try and make it work again. But as someone with zero experience with this sort of thing I have hit a wall.
When I first hooked it up last night I set the driver to the "adb interface driver", I got adb to see the device and I was able to execute some commands to it. I made it reboot just to see if I could, it still stopped at the word amazon, and then I went to sleep. Today I turned on my computer and adb will not find the device. Apparently something changed overnight and windows will now only see the device as a standard mtp usb device. I have attempted to force it to change with the "update drivers -> browse my computer -> let me pick from a list -> Have disk " line. But when I choose the kindle drivers or the adb drivers it tells me they are incompatible. Unplugging and plugging back in doesn't do anything. Restarting doesn't do anything. Attempting to uninstall the drivers doesn't do anything. I don't know what is left or how to fix this so I can proceed. And honestly even after I get through this road block I have no idea what I should do to try and make my tablet operational again. So I am in need of some guidance. Is there anyone out there that can show me the way or at least get adb to see my device again?
Click to expand...
Click to collapse
this is only for kindle fire 1 (2011)
there is a separate section for your device see
Fire Index: Which Amazon (Kindle) Fire Do I have?
for correct forum link
Sent from my XT1254 using XDA Labs