Stuck in boop loop after flashing stock rom with odin - T-Mobile Samsung Galaxy Note 3

I have tried flashing the stock image twice, but as it reboots it doesn't go any further than the 4g LTE screen and just loops that. Anyone have any suggestions?
I finally got it working mods feel free to delete this thread please.
Thanks

mgkaotic said:
I have tried flashing the stock image twice, but as it reboots it doesn't go any further than the 4g LTE screen and just loops that. Anyone have any suggestions?
I finally got it working mods feel free to delete this thread please.
Thanks
Click to expand...
Click to collapse
Would you mind sharing how exactly got it working?

digitalfiend said:
Would you mind sharing how exactly got it working?
Click to expand...
Click to collapse
Not at all, long story short it was an issue with my PC, I replaced some ram modules that had gone bad, and then updated my pc with windows update. I then re downloaded the image file because all the other ones were already corrupted. I re flashed and that pretty much did it.

Related

[SOLVED] Installation Problem

Hi folks,
I did rooted my arc 3 months back and i can still access my super user, yesterday i installed cwm for xperia phones successfully.
I tried to flash 4.0.4_Xperia-S_deodexed-V2.5beats using CWM(previous version stock 2.3.5). I did cleared the cache and all the stuff, but now i cannot boot to OS or CWM or anything, literally i can't use my phone.
It just shows up screen with Sony Ericsson Logo goes no where.
Please help me guys I want to install any custom ROM on my phone please suggest me
Thank you so much guys.
You have probably wiped data too which is a factory reset. Run your back up or reflash.
XperienceD said:
You have probably wiped data too which is a factory reset. Run your back up or reflash.
Click to expand...
Click to collapse
Thank you my friend, are there any guides to reflash, will it surely works if i reflash.
forgive me if i am asking too many questions.
badriinvenkat said:
Thank you my friend, are there any guides to reflash
Click to expand...
Click to collapse
Plenty, see the stickys in the general section.
XperienceD said:
Plenty, see the stickys in the general section.
Click to expand...
Click to collapse
i reflashed an old version 2.3.4 and every thing is working fine, got an OTA update on phone and downloaded the update using wifi and it turned off as the part of update process, thats it and never turned on :crying::crying::crying:
i tried again to flash the same version but never worked!!! what can i do now
Flash THIS with the flastool and report back.
i tried that just now and it does the same result, after flashing the .ftf file it says to take the cable off and turn it on. It never turns on but when i press the power button it blinks the green LED (donno what it does mean!!)
any ways thanks for your suggestion.
Try THIS instead, if that doesn't work then not sure.
XperienceD said:
Try THIS instead, if that doesn't work then not sure.
Click to expand...
Click to collapse
Thank yo so much my friend you really helped me a lot, sorry for keep asking you(I mean i should have searched everywhere before asking you)
My phone is working back :victory::victory::victory::victory::victory:
badriinvenkat said:
Thank yo so much my friend you really helped me a lot, sorry for keep asking you(I mean i should have searched everywhere before asking you)
My phone is working back :victory::victory::victory::victory::victory:
Click to expand...
Click to collapse
Excellent. Sometimes we just can't see the wood for the trees, myself included.

[Q] Boot hang after flashing using Odin back to stock rooted

Hello all,
I am facing problems with my SIII right now. I was running AOKP but due to the bluetooth not being able to sync with my stereo, I decided to go back to stock rooted. I just flashed back the stock rooted image using Odin, but now my phone sits at the Samsung screen with the blue notification light on. I have tried rebooting, and it gets to this point (after the rethink possible screen) and just sits. I am thinking another flash in Odin is in order? Is there a stock, non root image I can flash via odin? I am just really lost for ideas right now and any input would be appreciated! Thanks!
Update:
I tried flashing with odin again and this time I got a failed. It was in the process of flashing the "system". I am kinda starting to freak out. I am hoping that it's just the file I'm using (though it just worked not even a few days ago.) I am trying again and if this one bombs out, I think I am going to try a different file. The one I am downloading to try next is the "stock unroot" from the how-to video. Anyone have any luck with this?
Another Update:
I just re-flashed with odin, this time it says it successfully completed but once again it's stuck at the flashing Samsung logo with the indicator led on.... I am starting to really freak out lol. I have another file downloading that is supposedly just stock, no root or anything...
rakhov said:
Hello all,
I am facing problems with my SIII right now. I was running AOKP but due to the bluetooth not being able to sync with my stereo, I decided to go back to stock rooted. I just flashed back the stock rooted image using Odin, but now my phone sits at the Samsung screen with the blue notification light on. I have tried rebooting, and it gets to this point (after the rethink possible screen) and just sits. I am thinking another flash in Odin is in order? Is there a stock, non root image I can flash via odin? I am just really lost for ideas right now and any input would be appreciated! Thanks!
Update:
I tried flashing with odin again and this time I got a failed. It was in the process of flashing the "system". I am kinda starting to freak out. I am hoping that it's just the file I'm using (though it just worked not even a few days ago.) I am trying again and if this one bombs out, I think I am going to try a different file. The one I am downloading to try next is the "stock unroot" from the how-to video. Anyone have any luck with this?
Click to expand...
Click to collapse
Actually have the exact same situation going on right now, I will post if I can find a fix. Downloading an alternate stock build I found now and will let you know how it goes.
Glad to have a partner in crime
http://galaxys3root.com/galaxy-s3-unroot/how-to-unroot-att-galaxy-s3-sgh-i747/
This is the file/procedure I am going to try next. Good luck and I will stay posted with any info, likewise!
rakhov said:
Glad to have a partner in crime
http://galaxys3root.com/galaxy-s3-unroot/how-to-unroot-att-galaxy-s3-sgh-i747/
This is the file/procedure I am going to try next. Good luck and I will stay posted with any info, likewise!
Click to expand...
Click to collapse
Thats exactly what Odin is working on loading now, Download had just finished.
avarize said:
Thats exactly what Odin is working on loading now, Download had just finished.
Click to expand...
Click to collapse
Wicked, well good luck solider....Does anyone know the signifigince of the led being on? It looks like it is slightly pulsating too...I hope this isn't the "sorry, you just broke it" notification XD
rakhov said:
Wicked, well good luck solider....Does anyone know the signifigince of the led being on? It looks like it is slightly pulsating too...I hope this isn't the "sorry, you just broke it" notification XD
Click to expand...
Click to collapse
I've always noticed the LED being on during boot (or some of the boot) and it was also on when I had a bootloop during cm9 so I don't think it means anything.
Fair enough, I guess I never paid that much attention till now when things don't work heh. I do recall reading about someone else having the similar issue using odin...I am trying to find the post and if there was any follow up on it.
rakhov said:
Fair enough, I guess I never paid that much attention till now when things don't work heh. I do recall reading about someone else having the similar issue using odin...I am trying to find the post and if there was any follow up on it.
Click to expand...
Click to collapse
Didn't seem to have any luck with that download/odin. Still stuck, Trying a few more things, although I am a bit lost as to what to do from here.
---------- Post added at 02:52 AM ---------- Previous post was at 02:51 AM ----------
avarize said:
Didn't seem to have any luck with that download/odin. Still stuck, Trying a few more things, although I am a bit lost as to what to do from here.
Click to expand...
Click to collapse
Correction : Used that link you had posted, it was still stuck so I loaded up the toolkit and used option 20 for reboot options to force it into default recovery, wiped data & cache from there and let it reboot, it seemed to have hung but waited a few minutes and it came back to life. Back to complete stock here now, hope it works for you.
avarize said:
Didn't seem to have any luck with that download/odin. Still stuck, Trying a few more things, although I am a bit lost as to what to do from here.
---------- Post added at 02:52 AM ---------- Previous post was at 02:51 AM ----------
Correction : Used that link you had posted, it was still stuck so I loaded up the toolkit and used option 20 to force into default recovery, wiped data & cache from there and let it reboot, it seemed to have hung but waited a few minutes and it came back to life. Back to complete stock here now, hope it works for you.
Click to expand...
Click to collapse
When you say toolkit are you talking about the one from the thread labled [SAMSUNG GALAXY S3 QCOM TOOLKIT V2.3] Drivers Backup Root CWM BusyBox + MORE [ATT]? And if so you just opened it and used option 20? nothing else? This sounds great if it works hehe.
rakhov said:
When you say toolkit are you talking about the one from the thread labled [SAMSUNG GALAXY S3 QCOM TOOLKIT V2.3] Drivers Backup Root CWM BusyBox + MORE [ATT]? And if so you just opened it and used option 20? nothing else? This sounds great if it works hehe.
Click to expand...
Click to collapse
Should have explained a bit better. Yes that toolkit
While it was stuck at samsung screen.
1 For AT&T (Obviously)
20 For reboot options
1 For recovery.
Then wipe data/cache
Then wiped cache (no idea why)
then rebooted.
When i did an Odin to stock I also froze on the Samsung logo. I had to boot to recovery and do a factory reset I side recovery to get it to boot. Keep in mind everything will be deleted though
Sent from my SAMSUNG-SGH-I747 using xda premium
That is exelent. I am downloading the toolkit right now and will report back shortly.
Once you got it to boot, did you still have root? I am wondering if you flashing the "stock rom" that I posted, if that had any impact. I have only pushed the root66 file, so I am expecting root when(if XD) I get this thing going again. I appreciate you being more thorough with your instructions, and will report back with my results as soon as I get some
Also, are we loners on this? I am not seeing any other posts about going back to stock/stock rooted from modded roms using odin? I am trying to figure out the best method to go back to stock. I made a nandroid and I am sure that would work, but all of this word about having to flash different kernels and bluetooth/wifi drivers to get stock working properly makes me wonder if just using odin is the easiest method, as it restores everything on the phone (to my knowledge).
crash822 said:
When i did an Odin to stock I also froze on the Samsung logo. I had to boot to recovery and do a factory reset I side recovery to get it to boot. Keep in mind everything will be deleted though
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
That is great, this may sound a little silly, but how do I boot to recovery? Thanks!
UPDATE:Nvm, google hehe. I just did the factory reset...Things are looking good so far, the haptic lights turned on at least...BOOM! We are good gentlemen. It looks like all it took was the recovery wipe. This is great news! I will try to figure out how to mark this as solved, and you crash822, you get a thanks
NP sir. We all have to start somewhere. Luckily for me I was already planning on doing a full wipe so I backed up everything I wanted to keep from my phone onto my computer before using odin.
I seem to be having the same issue. I've downloaded the toolkit as you guys have suggested. are you guys in download mode on the phone while you use this? it seems to want me to be in debugging mode and i can't get to that. I've tried a factory reset with no luck.

Odin seems to be broken on my Galaxy S3

Hey guys,
This may sound weird but I can't seem to pretty much flash anything thru Odin. I have no clue as to what could be the issue. I tried multiple usb ports and nothing. It's so weird. Any ideas as to what is happening?
makavelicruz said:
Hey guys,
This may sound weird but I can't seem to pretty much flash anything thru Odin. I have no clue as to what could be the issue. I tried multiple usb ports and nothing. It's so weird. Any ideas as to what is happening?
Click to expand...
Click to collapse
Did you just try flashing one file or multiple files?
If you just tried one file, it could be a bad download. Just re-download the file and try again.
If you've tried multiple files and they all can't be flashed, then I'm not sure what's going on? What does ODIN say when you try to flash?
You do have the Samsung drivers installed, right? Is this a sudden issue? Has it worked in the past? Try loading the Samsung drivers and Odin on a different computer.
stevessvt said:
You do have the Samsung drivers installed, right? Is this a sudden issue? Has it worked in the past? Try loading the Samsung drivers and Odin on a different computer.
Click to expand...
Click to collapse
Thanks for the replies guys. Yeah this seems sudden not sure why, and in the past it has worked when I rooted it. Last night I tried Odin-ing back to full stock to get stock recovery, but the odin said it failed. Now after i rebooted the phone, I wasn't getting 4g, I was getting Edge. i wonder if i broke my 4g signal as well. You guys think I should try the mobile odin?
Edit: Alright, I used mobile odin and that worked, however, I still don't get 4g network, and now every time I connect my phone to Kies on PC it says "Your device does not support software upgrading via kies" when I happened to be ALL stock. These a little issues I never had before, it's weird.
makavelicruz said:
Thanks for the replies guys. Yeah this seems sudden not sure why, and in the past it has worked when I rooted it. Last night I tried Odin-ing back to full stock to get stock recovery, but the odin said it failed. Now after i rebooted the phone, I wasn't getting 4g, I was getting Edge. i wonder if i broke my 4g signal as well. You guys think I should try the mobile odin?
Click to expand...
Click to collapse
Getting edge only? your IMEI still intact?
belly1026 said:
Getting edge only? your IMEI still intact?
Click to expand...
Click to collapse
what should it read exactly? because mine says 0/06, could that be it?
makavelicruz said:
what should it read exactly? because mine says 0/06, could that be it?
Click to expand...
Click to collapse
DING DING DING! We have a wiener!
This thread should help
http://forum.xda-developers.com/showthread.php?t=1804123
wow you guys rock, I never would've thought it was the IMEI. It turns out the IMEI on the phone got completely lost, my guess during the bad Odin flashes. Why you guys think that happened though? Thanks for the link stevessvt. I followed the thread, but some of its download links were not working, so I was lead to another similar thread with links working properly http://forum.xda-developers.com/showthread.php?t=1801997 and I managed to restore my IMEI back into the phone. I wish I would've seen your post a lot sooner, I even went to T-mobile to see if it was a sim card malfunction or a 4g outage in the area, but they couldn't figure it out so they are sending me a new phone tomorrow...damn now I gotta return this one.
I wonder why this happened though?? All I was trying to do was flash back to stock so I can get stock recovery back, but like I said earlier it failed me like three times.
Thanks you guys for leading me to the right direction.

Stuck on Boot Screen CM10

Just tried to installed CM10 on my T-Mobile Samsung Galaxy II. It's been stuck at the boot animation for over 10 minutes. What can I do? My SD card bit the dust and I don't have the backup I'd made previously. I had the SD card's contents saved on my desktop but no idea where the file would be or what it's name would be for the backup I made previously.
I'm not really a n00b per say. Have flashed CM roms on other phones in the past with no issues. First time this has happened. I've tried doing a factory wipe/reset, wiping the cache and Dalvik. Multiple times. No change. Any help is much appreciated as this is my only phone.
UPDATE: Found my CMW backup files but no luck using them. CMW gives me a MD5 mismatch now. Any ideas? Where can I find a stock T-Mobile ROM of 4.1.2? (I think that was the version I had last)
Hollywood80 said:
Just tried to installed CM10 on my T-Mobile Samsung Galaxy II. It's been stuck at the boot animation for over 10 minutes. What can I do? My SD card bit the dust and I don't have the backup I'd made previously. I had the SD card's contents saved on my desktop but no idea where the file would be or what it's name would be for the backup I made previously.
I'm not really a n00b per say. Have flashed CM roms on other phones in the past with no issues. First time this has happened. I've tried doing a factory wipe/reset, wiping the cache and Dalvik. Multiple times. No change. Any help is much appreciated as this is my only phone.
Click to expand...
Click to collapse
UPDATE #2: So I am trying to do what's said over at http://forum.xda-developers.com/showthread.php?t=1513359 but getting stuck at Step 6/7. No matter what it seems Odin will not recognize my phone. Phone is in Download mode as it says to do but Odin never detects any phone plugged in. Any help?
Have latest Samsung drivers but it appears per Device Manager that it keeps getting stuck (the phone) at "This device cannot start. (Code 10)" error. Tried uninstalling device, uninstalling drivers, and reinstalling drivers. Same thing every time. I got ODIN to recognize the phone once but after a few minutes it came back with FAILED.
Wish I could figure this out. More frustrated that I can't get it at least back to stock than anything now.
If you have CM10 installed on your phone and if its stuck at boot screen. Do this:
1. Download darkside-cachewipe.zip from http://sourceforge.net/projects/darksidetools/files/ and copy it to your sdcard.
2. Remove the battery wait for 10 seconds
3. Insert the battery again. Holding the volume keys and power key, boot into recovery mode
4. Install zip from sdcard and run darkside-cachewipe.zip
5. Try booting the phone again.
6. This time it should boot correctly.
virajss said:
If you have CM10 installed on your phone and if its stuck at boot screen. Do this:
1. Download darkside-cachewipe.zip from http://sourceforge.net/projects/darksidetools/files/ and copy it to your sdcard.
2. Remove the battery wait for 10 seconds
3. Insert the battery again. Holding the volume keys and power key, boot into recovery mode
4. Install zip from sdcard and run darkside-cachewipe.zip
5. Try booting the phone again.
6. This time it should boot correctly.
Click to expand...
Click to collapse
I agree(not that you need someone to agree with you), but this should take care of the issue.
idtheftvictim said:
I agree(not that you need someone to agree with you), but this should take care of the issue.
Click to expand...
Click to collapse
Well that seemed to work. I had to do a few other things but I ended up getting CM 10.1 RC5 installed and got to the homescreen. Problem I'm having now is I can't get a signal from my carrier at all. No matter where I'm at. It was connected to it at one point but now it doesn't. It's registering on the network because it says T-Mobile but no bars and no 4G indicator showing up whatsoever. Any ideas? Kind of useless at the moment with no signal.
EDIT: So from another post I have on the CM forums they said to look here in XDA for an updated radio? Any ideas? I'm not a n00b but I haven't modded a phone since my old HTC original Android phone years ago so I'm a bit rusty. My current Baseband is currently T989UVLE1.
Hollywood80 said:
Well that seemed to work. I had to do a few other things but I ended up getting CM 10.1 RC5 installed and got to the homescreen. Problem I'm having now is I can't get a signal from my carrier at all. No matter where I'm at. It was connected to it at one point but now it doesn't. It's registering on the network because it says T-Mobile but no bars and no 4G indicator showing up whatsoever. Any ideas? Kind of useless at the moment with no signal.
EDIT: So from another post I have on the CM forums they said to look here in XDA for an updated radio? Any ideas? I'm not a n00b but I haven't modded a phone since my old HTC original Android phone years ago so I'm a bit rusty. My current Baseband is currently T989UVLE1.
Click to expand...
Click to collapse
You will have to update the baseband to MC6
http://goo.im/devs/Void_Dweller/SGH-T989_UVMC6_radio.zip
virajss said:
You will have to update the baseband to MC6
Click to expand...
Click to collapse
Yeah finally found that out. There is a TLMC4 but it says it's for Telus not T-Mobile. Would that be a problem?
Hollywood80 said:
Yeah finally found that out. There is a TLMC4 but it says it's for Telus not T-Mobile. Would that be a problem?
Click to expand...
Click to collapse
Use the radio from my link: Its for TMobile
http://goo.im/devs/Void_Dweller/SGH-T989_UVMC6_radio.zip
virajss said:
Use the radio from my link: Its for TMobile
http://goo.im/devs/Void_Dweller/SGH-T989_UVMC6_radio.zip
Click to expand...
Click to collapse
Just applied the UVMC6 and....IT WORKS! Thanks to all of you for ALL of your help in helping this non-n00b but feeling like a n00b get his **** fixed! You all rock!
Hollywood80 said:
Just applied the UVMC6 and....IT WORKS! Thanks to all of you for ALL of your help in helping this non-n00b but feeling like a n00b get his **** fixed! You all rock!
Click to expand...
Click to collapse
How about hitting the "Thanks" button, if the posts above have helped you.
virajss said:
How about hitting the "Thanks" button, if the posts above have helped you.
Click to expand...
Click to collapse
Ahh yes! Done. Thanks again. Do have one last question. When I finally got into the phone again it started to re-download all my apps I'd had installed previously. But my wi-fi dropped out in the middle of it. How can I make it do that automatic download of my previous apps/settings again? Or can I?
Hollywood80 said:
Ahh yes! Done. Thanks again. Do have one last question. When I finally got into the phone again it started to re-download all my apps I'd had installed previously. But my wi-fi dropped out in the middle of it. How can I make it do that automatic download of my previous apps/settings again? Or can I?
Click to expand...
Click to collapse
Not sure if you can do that. Go to google playstore from your laptop and then install all the missing apps from the laptop. Its faster that way.
Me too am a flashoholic, so I create update.zip file from TitaniumBackup app and keep it for installing all my apps from the recovery mode.
virajss said:
Not sure if you can do that. Go to google playstore from your laptop and then install all the missing apps from the laptop. Its faster that way.
Me too am a flashoholic, so I create update.zip file from TitaniumBackup app and keep it for installing all my apps from the recovery mode.
Click to expand...
Click to collapse
Yeah I have Titanium Backup even got the Pro one and my SD card got wiped so it can't restore anything now. I could just find the Titanium folder on my desktop because I had made a copy of the entire SD card just prior to it getting wiped clean.

Post Chainfire Root Issues 5.1.1

I attempted to root my phone using the Chainfire Auto-root method today and somehow managed to use the 925p edge MD5 file instead of 920p. This caused a few issues, the X-axis was inverted, no service, and a continual automatic reboot after about 30-60 seconds of the phone being on. In an attempt to fix it, I have tried a few things. in many combinations. I have reflashed the stock tar file, cleared cache, factory reset, and flashed the PIT file found in post 12 of this thread http://forum.xda-developers.com/sprint-galaxy-s6/help/operating-smg920p-t3263325/page3. Unfortunately all attempts have been for fruitless. Obviously the first issue to be tackled is the constant rebooting. Any help would be appreciated.
Maybe flashing unikernel will help, it can be found here: https://www.androidfilehost.com/?fid=24269982087012055
Just flash it in Odin, if that does not work you may want to try bringing it to where you bought it for warranty.
No luck, unfortunately.
offthatwall said:
No luck, unfortunately.
Click to expand...
Click to collapse
Idk, @koop1955 any suggestions?
1619415 said:
Idk, @koop1955 any suggestions?
Click to expand...
Click to collapse
Posted this in the other thread: http://forum.xda-developers.com/showpost.php?p=64735692&postcount=19
That is all that I have for you.
offthatwall said:
I attempted to root my phone using the Chainfire Auto-root method today and somehow managed to use the 925p edge MD5 file instead of 920p. This caused a few issues, the X-axis was inverted, no service, and a continual automatic reboot after about 30-60 seconds of the phone being on. In an attempt to fix it, I have tried a few things. in many combinations. I have reflashed the stock tar file, cleared cache, factory reset, and flashed the PIT file found in post 12 of this thread http://forum.xda-developers.com/sprint-galaxy-s6/help/operating-smg920p-t3263325/page3. Unfortunately all attempts have been for fruitless. Obviously the first issue to be tackled is the constant rebooting. Any help would be appreciated.
Click to expand...
Click to collapse
Koop's stock firmware didn't fix mine for some reason either...heres the stock version that fixed mine
mediafire.com/download/c55xaeb7geq0i2d/G920PVPU3BOJ7_G920PSPT3BOJ7_SPR.zip
Hope it helps!
x1xmadex1x said:
Koop's stock firmware didn't fix mine for some reason either...heres the stock version that fixed mine
mediafire.com/download/c55xaeb7geq0i2d/G920PVPU3BOJ7_G920PSPT3BOJ7_SPR.zip
Hope it helps!
Click to expand...
Click to collapse
The firmware posted above is OJ7, which seems to be an earlier version than the OL1 firmware. I have no idea why OJ7 would work for you when OL1 wouldn't. (Unless you got a bad download of OL1, which is why I recommend checking MD5.)
If you are still on OJ7, can you try system update and see if that takes you to OL1?
koop1955 said:
The firmware posted above is OJ7, which seems to be an earlier version than the OL1 firmware. I have no idea why OJ7 would work for you when OL1 wouldn't. (Unless you got a bad download of OL1, which is why I recommend checking MD5.)
If you are still on OJ7, can you try system update and see if that takes you to OL1?
Click to expand...
Click to collapse
I have already re-rooted my device and installed twrp...it wont let me install a system update due to custom and not official...Also I downloaded the OL1 three occasions..and MD5 passed
x1xmadex1x said:
I have already re-rooted my device and installed twrp...it wont let me install a system update due to custom and not official...Also I downloaded the OL1 three occasions..and MD5 passed[/Q
Im have the constant reboot now. Im gonna try another pb6 6.0.1 tar file only one ive tried was the sprint worker one said revo in in it. That didnt not fix my constant rebooting issue. So far any rom even after odin stock still rebooting every 2 minutes.
Click to expand...
Click to collapse
will get that logcat
Saafir said:
Note the time and grab a logcat.
Ok i left the phone at home but i did look at the log cat about the first ten lines all had emmc in them im not quite sure. Well I cant read it lol. when i get home il flash twrp and restore a back up let reboot a few times get a log cat and post it will twrps log cat work? If im lucky i might get a app installed to do it. I no longer got adb and fastboot on my computer but will download if needed.
im waiting for a replacement to get to the sprint store. i flashed stock and took it in rebooting sprint guy tried factory resetting it and clearing cache which got it stuck in the pre load starting or optimizing apps before itd finish it it would reboot and if i kept going id beable get to start up settings thats it. now i can flash twrp still it does restores my back ups and after that itl boot the system i can uninstall or install something or what not maybe 1 min after im able to get into it it reboot. only wifi connects though.
Again i had about all roms we got on sprint forum on that phone worked awesome loved it til the time i restored the efs on 6.0.1 with a twrp thats a unofficial build modded to work on 920p.
Click to expand...
Click to collapse
Sounds good thanks man.
Seems as maybe a somewhat common issue unfortunately thats happening for s6 as well as sprint note 5 as there are a few threads regarding the same issue. Theres a thread for s6 on this issue and on 2nd page appears as if someone found a fix having something to do with letting it die completely etc.. http://forum.xda-developers.com/sprint-galaxy-s6/help/constant-rebooting-t3287213
I figured my rebooting issue was corrupted data becausr i was transferring from phone to pc to phone and no md5 check. Though now i will use it. Good luck

Categories

Resources